Multilayer Fluorine-Free MoBTx MBene with Hydrophilic Structural-Modulating for the Fabrication of a Low-Resistance and High-Resolution Humidity Sensor.

2D transition metal borides (MBenes) with abundant surface terminals hold great promise in molecular sensing applications. However, MBenes from etching with fluorine-containing reagents present inert -fluorine groups on the surface, which hinders their sensing capability. Herein, the multilayer fluorine-free MoBTx MBene (where Tx represents O, OH, and Cl) with hydrophilic structure is prepared by a hydrothermal-assisted hydrochloric acid etching strategy based on guidance from the first-principle calculations. Significantly, the fluorine-free MoBTx-based humidity sensor is fabricated and demonstrates low resistance and excellent humidity performance, achieving a response of 90% to 98%RH and a high resolution of 1%RH at room temperature. By combining the experimental results with the first-principles calculations, the interactions between MoBTx and H2O, including the adsorption and intercalation of H2O, are understood first in depth. Finally, the portable humidity early warning system for real-time monitoring and early warning of infant enuresis and back sweating illustrates its potential for humidity sensing applications. This work not only provides guidance for preparation of fluorine-free MBenes, but also contributes to advancing their exploration in sensing applications.

Poison to Promise: The Resurgence of Organophosphorus Fluoride Chemistry.

Organophosphorus(V) fluorides have a long and tumultuous history, with early applications as toxins and nerve agents reflecting their poisonous past. Behind these very real safety considerations, there is also growing potential in a wide range of fields, from chemical biology to drug development. The recent inclusion of organophosphorus(V) fluorides in click chemistry exemplifies the promise these compounds possess and brings these molecules to the brink of a resurgence. In this Perspective, we delve into the history of P(V)-F compounds, discuss the precautions needed to work with them safely, and explore recent advancements in their synthesis and application. We conclude by discussing how this field can continue on a path toward innovation.

Boosting Catalytic and Anti-fluorination Performance of the Ru/Vanadia-Titania Catalyst for the Oxidative Destruction of Freon by Sulfuric Acid Modification.

Chlorofluorocarbons (CFCs) exert a strong greenhouse effect and constitute the largest contributor to ozone depletion. Catalytic removal is considered an effective pathway for eliminating low-concentration CFCs under mild conditions. The key issue is the easy deactivation of the catalysts due to their surface fluorination. We herein report a comparative investigation on catalytic dichlorodifluoromethane (CFC-12) removal in the absence or presence of water over the sulfuric-acid-modified three-dimensionally ordered macroporous vanadia-titania-supported Ru (S-Ru/3DOM VTO) catalysts. The S-Ru/3DOM VTO catalyst exhibited high activity (T90% = 278 °C at space velocity = 40 000 mL g-1 h-1) and good stability within 60 h of on-stream reaction in the presence of 1800 ppm of water due to the improvements in acid site amount and redox ability that promoted the adsorption of CFC-12 and the activation of C-F bonds. Compared with the case under dry conditions, catalytic performance for CFC-12 removal was better over the S-Ru/3DOM VTO catalyst in the presence of water. Water introduction mitigated surface fluorination by the replenishment of hydroxyl groups, inhibited the formation of halogenated byproducts via the surface fluorine species cleaning effect, and promoted the reaction pathway of COX2 (X = Cl/F) → carboxylic acid → CO2.

Phosphonium SF5- Salts Derived from Sulfur Hexafluoride as Deoxyfluorination Reagents.

Sulfur based deoxyfluorination reagents are usually derived from the corrosive gas SF4. Herein, we report the synthesis and properties of an easily accessible phosphonium salt [(tmg)3PF]+SF5- (1) which was obtained from the reaction of sulfur hexafluoride (SF6) with tris(tetramethylguanidinyl)phosphine. The performance of this crystalline SF5- salt as a reagent in deoxyfluorination reactions was investigated together with a second SF5- salt [(R1)3PF]+SF5- (2) containing bulky substituents (R1 = 1,3-di-tert-butylimidazolidin-2-ylidenamino). Both reagents proved to be effective for the deoxyfluorination of various functional groups including alcohols, anhydrides, and amides.

Fluorine-functionalized covalent organic framework coated solid-phase microextraction probe coupled with electrospray ionization mass spectrometry for monitoring triclosan, triclocarban, and chlorophenols in mice.

Triclosan (TCS), triclocarban (TCC), and chlorophenols (CPs) are broad-spectrum antibacterials widely used in dermatological and oral hygiene products, which could induce severe liver and intestine injuries. Hence, it is essential to establish a rapid and sensitive method to monitor TCS, TCC, and CPs in various organisms. In this work, fluorine-functionalized covalent organic framework (COF-F) was prepared by using 4,4',4''-(1,3,5-triazine-2,4,6-triyl)tri-aniline and 2,3,5,6-tetrafluoroterephthalaldehyde as two building units and employed as a solid phase microextraction (SPME) probe for the extraction of TCS, TCC and CPs. The COF-F possessed excellent hydrophobicity, a large specific surface area (1354.3 m2 g-1) and high uniform porosity (3.2 nm), which facilitated high selectivity and adsorption properties towards TCS, TCC, and CPs. Therefore, the as-prepared COF-F-SPME in combination with electrospray ionization mass spectrometry has been developed to provide fast and ultrasensitive detection of TCS, TCC, and CPs in biological samples. The established method demonstrated satisfactory linear ranges (0.01-100.00 µg L-1) and low limits of detection (0.003-0.040 µg L-1) for TCS, TCC and CPs. The developed method could be successfully applied to detect TCS, TCC and CPs in the liver and kidney tissues of mice, demonstrating the potential for the detection of chlorinated aromatic pollutants in the biological samples.

Comparative impact of surface and bulk fluoride anion doping on the electrochemical performance of co-free Li-rich Mn-based layered cathodes.

Li-rich Mn-based (LMR) layered oxides are considered promising cathode materials for high energy-density Li-ion batteries. Nevertheless, challenges such as irreversible oxygen loss at the surface during the initial charge, alteration of the bulk structure, and poor rate performance impede their path to commercialisation. Most modification methods focus on specific layers, making the overall impact of modifications at various depths on the properties of materials unclear. This research presents an approach by using doping to adjust both surface and bulk properties; the materials with surface and bulk fluoride anion doping are synthesised to explore the connection between doping depth, structural and electrochemical stability. The surface-doped material significantly improves the initial Coulombic efficiency (ICE) from 77.85% to 85.12% and limits phase transitions, yet it does not enhance rate performance. Conversely, doping in bulk stands out by improving both rate performance and cyclic stability: it increases the specific discharge capacity by around 60 mAh g-1 and enhances capacity retention from 57.69% to 82.26% after 300 cycles at 5C. These results highlight a notable dependence of material properties on depth, providing essential insights into the mechanisms of surface and bulk modifications.

Preclinical evaluation of [18F]SYN1 and [18F]SYN2, novel radiotracers for PET myocardial perfusion imaging.

BACKGROUND: Positron emission tomography (PET) is now an established diagnostic method for myocardial perfusion imaging (MPI) in coronary artery disease, which is the main cause of death globally. The available tracers show several limitations, therefore, the 18F-labelled tracer is in high demand nowadays. The preclinical studies on normal Wistar rats aimed to characterise two potential, novel radiotracers, [18F]SYN1 and [18F]SYN2, to evaluate which is a better candidate for PET MPI cardiotracer. RESULTS: The dynamic microPET images showed rapid myocardial uptake for both tracers. However, the uptake was higher and also stable for [18F]SYN2, with an average standardized uptake value of 3.8. The biodistribution studies confirmed that [18F]SYN2 uptake in the cardiac muscle was high and stable (3.02%ID/g at 15 min and 2.79%ID/g at 6 h) compared to [18F]SYN1 (1.84%ID/g at 15 min and 0.32%ID/g at 6 h). The critical organs determined in dosimetry studies were the small intestine and the kidneys. The estimated effective dose for humans was 0.00714 mSv/MBq for [18F]SYN1 and 0.0109 mSv/MBq for [18F]SYN2. The tested dose level of 2 mg/kg was considered to be the No Observed Adverse Effect Level (NOAEL) for both candidates. The better results were achieved for [18F]SYN2, therefore, further preclinical studies were conducted only for this tracer. Radioligand binding assays showed significant responses in 3 from 68 assays: muscarinic acetylcholine M1 and M2 receptors and potassium channel hERG. The compound was mostly metabolised via an oxidative N-dealkylation, while the fluor substituent was not separated from the molecule. CONCLUSION: [18F]SYN2 showed a favourable pharmacodynamic and pharmacokinetic profile, which enabled a clear visualization of the heart in microPET. The compound was well-tolerated in studies in normal rats with moderate radiation exposure. The results encourage further exploration of [18F]SYN2 in clinical studies.

Evaluation of Ilex guayusa and Piper marginatum Extract Cytotoxicity on Human Dental Pulp Mesenchymal Stem Cells.

BACKGROUND: Amelogenesis imperfecta is a hereditary disorder affecting dental enamel. Among its phenotypes, hypocalcified AI is characterized by mineral deficiency, leading to tissue wear and, consequently, dental sensitivity. Excessive fluoride intake (through drinking water, fluoride supplements, toothpaste, or by ingesting products such as pesticides or insecticides) can lead to a condition known as dental fluorosis, which manifests as stains and teeth discoloration affecting their structure. Our recent studies have shown that extracts from Colombian native plants, Ilex guayusa and Piper marginatum, deposit mineral ions such as phosphate and orthophosphate into the dental enamel structure; however, it is unknown whether these extracts produce toxic effects on the dental pulp. OBJECTIVE: To assess cytotoxicity effects on human dental pulp stem cells (hDPSCs) exposed to extracts isolated from I. guayusa and P. marginatum and, hence, their safety for clinical use. METHODS: Raman spectroscopy, fluorescence microscopy, and flow cytometry techniques were employed. For Raman spectroscopy, hDPSCs were seeded onto nanobiochips designed to provide surface-enhanced Raman spectroscopy (SERS effect), which enhances their Raman signal by several orders of magnitude. After eight days in culture, I. guayusa and P. marginatum extracts at different concentrations (10, 50, and 100 ppm) were added. Raman measurements were performed at 0, 12, and 24 h following extract application. Fluorescence microscopy was conducted using an OLIMPUS fv1000 microscope, a live-dead assay was performed using a kit employing a BD FACS Canto TM II flow cytometer, and data analysis was determined using a FlowJo program. RESULTS: The Raman spectroscopy results showed spectra consistent with viable cells. These findings were corroborated using fluorescence microscopy and flow cytometry techniques, confirming high cellular viability. CONCLUSIONS: The analyzed extracts exhibited low cytotoxicity, suggesting that they could be safely applied on enamel for remineralization purposes. The use of nanobiochips for SERS effect improved the cell viability assessment.

Rigid Cyclic Fluorinated Detergents: Fine-Tuning the Hydrophilic-Lipophilic Balance Controls Self-Assembling and Biochemical Properties.

We report herein the synthesis of three detergents bearing a perfluorinated cyclohexyl group connected through a short, hydrogenated spacer (i.e., propyl, butyl, or pentyl) to a ß-maltoside polar head that are, respectively, called FCymal-3, FCymal-4, and FCymal-5. Increasing the length of the spacer decreased the critical micellar concentration (CMC), as demonstrated by surface tension (SFT) and isothermal titration calorimetry (ITC), from 5 mM for FCymal-3 to 0.7 mM for FCymal-5. The morphology of the micelles was studied by dynamic light scattering (DLS), analytical ultracentrifugation (AUC), and small-angle X-ray scattering (SAXS), indicating heterogeneous rod-like shapes. While micelles of FCymal-3 and -4 have similar hydrodynamic diameters of ∼10 nm, those of FCymal-5 were twice as large. We also investigated the ability of the detergents to solubilize lipid membranes made of 1-palmitoyl-2-oleyl-sn-glycero-3-phosphocholine (POPC). Molecular modeling indicated that the FCymal detergents generate disorder in lipid bilayers, with FCymal-3 being inserted more deeply into bilayers than FCymal-4 and -5. This was experimentally confirmed using POPC vesicles that were completely solubilized within 2 h with FCymal-3, whereas FCymal-5 required >8 h. A similar trend was noticed for the direct extraction of membrane proteins from E. coli membranes, with FCymal-3 being more potent than FCymal-5. An opposite trend was observed in terms of stabilization of the two model membrane proteins bacteriorhodopsin (bR) and SpNOX. In all three FCymal detergents, bR was stable for at least 2 months with no signs of aggregation. However, while the structural integrity of bR was fully preserved in FCymal-4 and -5, minor bleaching was observed in FCymal-3. Similarly, SpNOX exhibited the least activity in FCymal-3 and the highest activity in FCymal-5. By combining solubilizing and stabilizing potency, FCymal detergents push forward our expectations of the usefulness of fluorinated detergents for handling and investigating membrane proteins.

Stable and Fast Ion Transport Electrolyte Interfaces Modified with Novel Fluorine- and Nitrogen-Containing Solvents for Ni-Rich Cathode Materials.

Ternary nickel-rich layered oxide LiNi0.8Co0.1Mn0.1O2 (NCM811) is recognized as a cathode material with a promising future, attributed to its high energy density. However, the pulverization of cathode particles, structural collapse, and electrolyte decomposition are closely associated with the fragile cathode-electrolyte interphases (CEI), which seriously affect the electrochemical performances of ternary high-nickel materials. In this paper, fluorine- and nitrogen-containing methyl-2-nitro-4-(trifluoromethyl)benzoate (MNTB) was selected, which was synergistically regulated with fluoroethylene carbonate (FEC) to generate a robust CEI film. The preferential decomposition of MNTB/FEC results in the formation of an inorganic-rich (Li3N, LiF, and Li2O) CEI film with uniformly dense and stable characteristics, which is conducive to the migration of Li+ and the stability of the NCM811 structure and enhances the cycling stability of the battery system. Simultaneously, MNTB effectively suppresses the adverse reaction associated with increased polarization caused by higher interface impedance due to conventional single FEC additives, further improving the rate capability of the battery. Moreover, MNTB/FEC can effectively eliminate HF, preventing its corrosion on the NCM811 cathode. Under the synergistic effect of MNTB/FEC, after 300 discharge cycles at a high cutoff voltage of 4.3 V and a current density of 1 C (2 mA cm-2), the discharge capacity of the NCM811||Li battery was 150.12 mA h g-1 with a capacity retention of 81.10%, while it was only 32.8% for the standard electrolyte (STD). The discharged capacity of the MNTB/FEC-containing battery was about 115.43 mA h g-1 at the high rate of 7 C, which was considerably higher than that of the STD (93.34 mA h g-1). In this study, the designed MNTB as a novel solvent synergistically regulated with FEC will contribute to the enhanced stability of NCM811 materials at high cutoff voltages and at the same time provide an effective modified strategy to enhance the stability of commercial electrodes.

A multi-platform approach for the comprehensive analysis of per- and polyfluoroalkyl substances (PFAS) and fluorine mass balance in commercial ski wax products.

The unique properties of per- and polyfluoroalkyl substances (PFAS) have led to their extensive use in consumer products, including ski wax. Based on the risks associated with PFAS, and to align with PFAS regulations, the international ski federation (FIS) implemented a ban on products containing "C8 fluorocarbons/perfluorooctanoate (PFOA)" at all FIS events from the 2021/2022 season, leading manufactures to shift their formulations towards short-chain PFAS chemistries. To date, most studies characterising PFAS in ski waxes have measured a suite of individual substances using targeted analytical approaches. However, the fraction of total fluorine (TF) in the wax accounted for by these substances remains unclear. In this study, we sought to address this question by applying a multi-platform, fluorine mass balance approach to a total of 10 commercially available ski wax products. Analysis of TF by combustion ion chromatography (CIC) revealed concentrations of 1040-51700 µg F g-1 for the different fluorinated waxes. In comparison, extractable organic fluorine (EOF) determined in methanol extracts by CIC (and later confirmed by inductively-coupled plasma-mass spectrometry and 19F- nuclear magnetic resonance spectroscopy) ranged from 92 to 3160 µg g-1, accounting for only 3-8.8 % of total fluorine (TF). Further characterisation of extracts by cyclic ion mobility-mass spectrometry (IMS) revealed 15 individual PFAS with perfluoroalkyl carboxylic acid concentrations up to 33 µg F g-1, and 3 products exceeding the regulatory limit for PFOA (0.025 µg g-1) by a factor of up to 100. The sum of all PFAS accounted for only 0.01-1.0 % of EOF, implying a high percentage of unidentified PFAS, thus, pyrolysis gas chromatography-mass spectrometry was used to provide evidence of the nature of the non-extractable fluorine present in the ski wax products.

Ways to improve understanding of PFAS contamination - A case study within a waste management facility.

Waste management facilities are a known source for per- and polyfluoroalkyl substances (PFAS) to the environment. In this study, water samples from seven subsections within a waste management facility in Sweden were analyzed for PFAS and extractable organofluorine (EOF). Oxidative conversion was used to investigate how much PFAS precursors could contribute to the EOF. Out of the 23 analyzed PFAS, ten compounds accounted for a major proportion of the concentrations. Before oxidative conversion the ∑10PFAS were between 0.44 µg/L and 17 µg/L. The EOF ranged from 2 µg/L F up to 79 µg/L F. There was a greater difference in concentrations and profiles between the subsections in comparison to the four sampling dates at respective sampling point, suggesting different sources of PFAS from the waste. Oxidative conversion revealed presence of precursors by elevated concentrations of perfluoroalkyl acids after oxidation, which increased the explained EOF up to 25%. Seven samples from one sampling date were selected to investigate if other fluorinated compounds (inorganic anions, ultra-short-chain PFAS, and zwitterions) could be a part of the unexplained EOF fraction. The contribution of fluorine from tetrafluoroborate and hexafluorophosphate were equal or higher proportions than the ∑10PFAS. The presence of the ionic liquids tetrafluoroborate and hexafluorophosphate could originate from battery waste, due to their use as counter ions in batteries. Ultra-short-chain PFAS increased the explained EOF by an average of 8%, with trifluoroacetic acid and trifluoromethane sulfonic acid being the main contributors. However, the reported concentrations of ultra-short-chain PFAS, were underestimated due to low recovery by the additional washing step to remove inorganic fluoride for EOF analysis. The concentrations of zwitterions were low and increased the explained EOF by < 1%. Our results suggest that EOF, selected PFAS, oxidative conversion and anionic fluorinated substances give a better picture of PFAS contamination.

High χ P2PFBEMA-b-P2VP Block Copolymers Forming 6-8 nm Domains for Semiconductor Lithography.

We leveraged the potential of high χ-low N block copolymer (BCP), namely, poly[2-(perfluorobutyl) ethyl methacrylate]-block-poly(2-vinylpyridine) (P2PFBEMA-b-P2VP), and demonstrated its utility in next-generation nanomanufacturing. By combining molecular dynamics simulations with experiments, the χ value was calculated to be as high as 0.4 (at 150 °C), surpassing similar structures. Highly ordered features suitable for application were observed, ranging in periods from 19.0 nm down to 12.1 nm, with feature sizes as small as 6 nm. Transmission electron microscopy images of the BCP solutions indicated that preformed micelles in the solution facilitated the self-assembly process of the thin film. In addition, the vertical or parallel orientation of the cylindrical structure was determined by manipulating the solvent, substrate, and annealing conditions. Finally, guided by a wide topographical template, nearly defect-free directed self-assembly (DSA) lines with a resolution of 8 nm were achieved, highlighting its potential practical application in DSA lithography technology.

Fluorine-Doped Li7La3Zr2O12 Fiber-Based Composite Electrolyte for Solid-State Lithium Batteries with Enhanced Electrochemical Performance.

Garnet-based electrolytes with high ionic conductivity and excellent stability against lithium metal anodes are promising for commercial applications in solid-state lithium batteries (SSLBs). However, the further development of SSLBs is inhibited by issues such as low ionic conductivity and uncontrolled lithium dendrite growth. Herein, we report the synthesis of fluorine-doped Li7La3Zr2O12 (LLZO-F0.2) fibers by electrospinning and the subsequent calcination at high temperatures. The solid composite electrolyte with LLZO-F0.2 exhibits an ionic conductivity of 5.37 × 10-4 S cm-1 and a high lithium-ion transference number of 0.61 at room temperature. Meanwhile, it exhibits lower resistance and more uniform lithium metal stripping and deposition in symmetric cells. The full cell with LiFePO4 cathode exhibits excellent rate capability and cycling stability for 800 cycles at 0.5 C with a discharge specific capacity retention of 97.7%. This fluorine-doped fibrous garnet-type electrolyte provides a viable option for preparing high-performance SSLBs.

Fluorine-Like BH4-Doped Li6PS5Cl with Improved Ionic Conductivity and Electrochemical Stability.

Sulfide-based solid electrolytes with high ionic conductivity have attracted a lot of attention. However, the incompatibility and interfacial instability of sulfides with the lithium metal anode have emerged as pivotal constraints on their development. To address this challenge, we proposed and successfully synthesized the BH4- doped argyrodite-type electrolyte Li6PS5Cl0.9(BH4)0.1 by mechanical ball milling and annealing. This electrolyte not only exhibits an exceptionally high ionic conductivity of 2.83 × 10-3 S cm-1 at 25 °C but also demonstrates outstanding electrochemical stability. The Li/Li6PS5Cl0.9(BH4)0.1/Li symmetric cell can stably run for more than 400 h at a current density of 0.2 mA cm-2. In sharp contrast, although the F- doped sample, Li6PS5Cl0.3F0.7, can highly improve Li6PS5Cl's electrochemical stability, the ionic conductivity will reduce dramatically to 6.63 × 10-4 S cm-1. The stepwise current method reveals a critical current density of 3.5 mA cm-2 for Li6PS5Cl0.9(BH4)0.1, which makes it a competitive sulfide-based solid electrolyte. This research offers valuable insights for designing new borohydride-containing solid electrolytes.

2,2-Difluoroethylation of Heteroatom Nucleophiles via a Hypervalent Iodine Strategy.

The 2,2-difluoroethyl group is an important lipophilic hydrogen bond donor in medicinal chemistry, but its incorporation into small molecules is often challenging. Herein, we demonstrate electrophilic 2,2-difluoroethylation of thiol, amine and alcohol nucleophiles with a hypervalent iodine reagent, (2,2-difluoro-ethyl)(aryl)iodonium triflate, via a proposed ligand coupling mechanism. This transformation offers a complementary strategy to existing 2,2-difluoroethylation methods and allows access to a wide range of 2,2-difluoroethylated nucleophiles, including the drugs Captopril, Normorphine and Mefloquine.

Detection of volatile hydroperfluoroalkanes during hydrothermal liquefaction of perfluoroalkyl carboxylic acids at circumneutral pH.

Hydrothermal liquefaction (HTL) is a promising technology for converting wet organic waste such as sewage sludge into biocrude oil while simultaneously destroying per- and polyfluoroalkyl substances (PFAS). This study tracked the fate and degradation of six representative PFAS in water to address the effect of perfluoroalkyl chain length on degradation rates and the formation of volatile transformation products at 300-350 °C. While perfluorosulfonic acids were recalcitrant, perfluoroalkyl carboxylic acids (PFCAs) were rapidly and completely decarboxylated to hydroperfluoroalkanes (1 H-perfluoroheptane in the case of perfluorooctanoic acid). The volatile hydroperfluoroalkane was subsequently defluorinated without detectable fluorocarbon intermediates yielding 30-60 % defluorination for ammonium perfluoro(2-methyl-3-oxahexanoate), perfluorobutanoic acid and perfluorooctanoic acid after 2 h at 350 °C. Increasing temperature (especially at 350 °C) and longer perfluoroalkyl chains substantially enhanced the defluorination. This is the first study to report volatile hydroperfluoroalkanes from PFCAs in HTL, raising concern about the potential emission of long-lived greenhouse gasses into the atmosphere, but also opening new avenues for PFAS destruction through HTL.

Fabrication of Waterborne Silicone-Modified Polyurethane Nanofibers for Nonfluorine Elastic Waterproof and Breathable Membranes.

Waterproof and breathable membranes have a huge market demand in areas, such as textiles and medical protection. However, existing fluorinated nanofibrous membranes, while possessing good waterproof and breathable properties, pose health and environmental hazards. Consequently, fabricating fluorine-free, eco-friendly waterborne membranes by integrating outstanding waterproofing, breathability, and robust mechanical performance remains a significant challenge. Herein, we successfully prepared waterborne silicone-modified polyurethane nanofibrous membranes with excellent elasticity, waterproofing, and breathability properties through waterborne electrospinning, using a small quantity of poly(ethylene oxide) as a template polymer and in situ doping of the poly(carbodiimide) crosslinking agent, followed by a simple hot-pressing treatment. The silicone imparted the nanofibrous membrane with high hydrophobicity, and the crosslinking agent enabled its stable porous structure. The hot-pressing treatment (120 °C) further reduced the pore size and improved the water resistance. This environmentally friendly nanofibrous membrane showed a high elongation at break of 428%, an ultra-high elasticity of 67.5% (160 cycles under 400% tensile strain), an air transmission of 13.2 mm s-1, a water vapor transmission rate of 5476 g m-2 d-1, a hydrostatic pressure of 51.5 kPa, and a static water contact angle of 137.9°. The successful fabrication of these environmentally friendly, highly elastic membranes provides an important reference for applications in healthcare, protective textiles, and water purification.

2-Methylimidazole-1-(N-tert-octyl)sulfonimidoyl fluoride: A Bench-Stable Alternative to SOF4 as Precursor to N,O-Substituted S(VI) Compounds.

S(VI) compounds with multiple N or O substituents are  often difficult to make and several crucial routes, such as multimodal SuFEx (Sulfur (VI) Fluoride Exchange) chemistry, rely on the highly useful but hazardous SOF4 gas. Safety issues and inaccessibility of SOF4 strongly hamper the developments of these organic compounds. Here we describe the synthesis and applications of 2-methylimidazole-1-(N-tert-octyl)sulfonimidoyl fluoride (ImSF), a novel bench-stable analogue of SOF4. ImSF is synthesized on a gram scale via a double fluorination of t-OctNSO. We show ImSF can undergo substitution reactions with phenols and amines, which lead to sulfurimidates and sulfuramidimidates, respectively, the intrinsically chiral analogous of medicinally relevant sulfates and sulfamates in which an S=O moiety is replaced by S=NR unit. Finally we demonstrate that such substitutions can occur enantiospecifically, providing the first entry to chiral sulfurimidates and sulfuramidimidates.

Step-by-step optimisation of the radiosynthesis of the brain HDAC6 radioligand [18F]FSW-100 for clinical applications.

BACKGROUND: Histone deacetylase 6 (HDAC6) is an emerging target for the treatment and diagnosis of proteinopathies. [18F]FSW-100 was recently developed as a promising brain-penetrating radioligand for HDAC6 PET imaging and the process validation of [18F]FSW-100 radiosynthesis for clinical use is complete, but no detailed synthetic strategy nor process optimisation has been reported. Here, we describe the optimisation of several processes in [18F]FSW-100 radiosynthesis, including the 18F-fluorination reaction, semipurification of the 18F-intermediate, and purification of the product by high-performance liquid chromatography (HPLC), to achieve a radiochemical yield (RCY) adequate for clinical applications of the radioligand. Our findings will aid optimisation of radiosynthesis processes in general. RESULTS: In the 18F-fluorination reaction, the amount of copper reagent was reduced without reducing the nonisolated RCY of the intermediate (50%), thus reducing the risk of copper contamination in the product injection solution. Optimising the solid-phase extraction (SPE) conditions for semipurification of the intermediate improved its recovery efficiency. The addition of anti-radiolysis reagents to the mobile phase for the HPLC purification of [18F]FSW-100 increased its activity yield in radiosynthesis using a high [18F]fluoride radioactivity of approximately 50 GBq. The SPE-based formulation method and additives for the injection solution were optimised, and the resulting [18F]FSW-100 injection solution was stable for over 2 h with a radiochemical purity of greater than 95%. CONCLUSIONS: Of all the reconsidered processes, we found that optimisation of the SPE-based semipurification of the intermediate and of the mobile phase for HPLC purification in particular improved the RCY of [18F]FSW-100, doubling it compared to that of the original protocol. The radioactivity of [18F]FSW-100 synthesized using the optimized protocol was sufficient for multiple doses for a clinical study.