Triplet-Triplet Annihilation Upconverting Liposomes: Mechanistic Insights into the Role of Membranes in Two-Dimensional TTA-UC.

Triplet-triplet annihilation upconversion (TTA-UC) implemented in nanoparticle assemblies is of emerging interest in biomedical applications, including in drug delivery and imaging. As it is a bimolecular process, ensuring sufficient mobility of the sensitizer and annihilator to facilitate effective collision in the nanoparticle is key. Liposomes can provide the benefits of two-dimensional confinement and condensed concentration of the sensitizer and annihilator along with superior fluidity compared to other nanoparticle assemblies. They are also biocompatible and widely applied across drug delivery modalities. However, there are relatively few liposomal TTA-UC systems reported to date, so systematic studies of the influence of the liposomal environment on TTA-UC are currently lacking. Here, we report the first example of a BODIPY-based sensitizer TTA-UC system within liposomes and use this system to study TTA-UC generation and compare the relative intensity of the anti-Stokes signal for this system as a function of liposome composition and membrane fluidity. We report for the first time on time-resolved spectroscopic studies of TTA-UC in membranes. Nanosecond transient absorption data reveal the BODIPY-perylene dyad sensitizer has a long triplet lifetime in liposome with contributions from three triplet excited states, whose lifetimes are reduced upon coinclusion of the annihilator due to triplet-triplet energy transfer, to a greater extent than in solution. This indicates triplet energy transfer between the sensitizer and the annihilator is enhanced in the membrane system. Molecular dynamics simulations of the sensitizer and annihilator TTA collision complex are modeled in the membrane and confirm the co-orientation of the pair within the membrane structure and that the persistence time of the bound complex exceeds the TTA kinetics. Modeling also reliably predicted the diffusion coefficient for the sensitizer which matches closely with the experimental values from fluorescence correlation spectroscopy. The relative intensity of the TTA-UC output across nine liposomal systems of different lipid compositions was explored to examine the influence of membrane viscosity on upconversion (UC). UC showed the highest relative intensity for the most fluidic membranes and the weakest intensity for highly viscous membrane compositions, including a phase separation membrane. Overall, our study reveals that the co-orientation of the UC pair within the membrane is crucial for effective TTA-UC within a biomembrane and that the intensity of the TTA-UC output can be tuned in liposomal nanoparticles by modifying the phase and fluidity of the liposome. These new insights will aid in the design of liposomal TTA-UC systems for biomedical applications.

Microfluidic Giant Polymer Vesicles Equipped with Biopores for High-Throughput Screening of Bacteria.

Understanding the mechanisms of antibiotic resistance is critical for the development of new therapeutics. Traditional methods for testing bacteria are often limited in their efficiency and reusability. Single bacterial cells can be studied at high throughput using double emulsions, although the lack of control over the oil shell permeability and limited access to the droplet interior present serious drawbacks. Here, a straightforward strategy for studying bacteria-encapsulating double emulsion-templated giant unilamellar vesicles (GUVs) is introduced. This microfluidic approach serves to simultaneously load bacteria inside synthetic GUVs and to permeabilize their membrane with the pore-forming peptide melittin. This enables antibiotic delivery or the influx of fresh medium into the GUV lumen for highly parallel cultivation and antimicrobial efficacy testing. Polymer-based GUVs proved to be efficient culture and analysis microvessels, as microfluidics allow easy selection and encapsulation of bacteria and rapid modification of culture conditions for antibiotic development. Further, a method for in situ profiling of biofilms within GUVs for high-throughput screening is demonstrated. Conceivably, synthetic GUVs equipped with biopores can serve as a foundation for the high-throughput screening of bacterial colony interactions during biofilm formation and for investigating the effect of antibiotics on biofilms.

Antifungal Activity and Molecular Mechanisms of Copper Nanoforms against Colletotrichum gloeosporioides.

In this work, we have synthesized copper nanoforms (Cu NFs) using ascorbic acid as a reducing agent and polyvinylpyrrolidone as a stabilizer. Elemental characterization using EDS has shown the nanostructure to be of high purity and compare well with commercially sourced nanoforms. SEM images of both Cu NFs show some agglomeration. The in-house NFs had a better even distribution and size of the nanostructures. The XRD peaks represented a face-centered cubic structure of Cu2O. The commercially sourced Cu NFs were found to be a mixture of Cu and Cu2O. Both forms had a crystalline structure. Using these two types of Cu NFs, an antimicrobial study against Colletotrichum gloeosporioides, a devastating plant pathogen, showed the in-house Cu NFs to be most effective at inhibiting growth of the pathogen. Interestingly, at low concentrations, both Cu NFs increased fungal growth, although the mycelia appeared thin and less dense than in the control. SEM macrographs showed that the in-house Cu NFs inhibited the fungus by flattening the mycelia and busting some of them. In contrast, the mycelia were short and appeared clustered when exposed to commercial Cu NFs. The difference in effect was related to the size and/or oxidation state of the Cu NFs. Furthermore, the fungus produced a defense mechanism in response to the NFs. The fungus produced melanin, with the degree of melanization directly corresponding to the concentration of the Cu NFs. Localization of aggregated Cu NFs could be clearly observed outside of the model membranes. The large agglomerates may only contribute indirectly by a hit-and-bounce-off effect, while small structures may adhere to the membrane surface and/or internalize. Spatio-temporal membrane dynamics were captured in real time. The dominant dynamics culminated into large fluctuations. Some of the large fluctuations resulted in vesicular transformation. The major transformation was exo-bud/exo-cytosis, which may be a way to excrete the foreign object (Cu NFs).

Formation of Giant Unilamellar Vesicles Assisted by Fluorinated Nanoparticles.

In the quest to produce artificial cells, one key challenge that remains to be solved is the recreation of a complex cellular membrane. Among the existing models, giant unilamellar vesicles (GUVs) are particularly interesting due to their intrinsic compartmentalisation ability and their resemblance in size and shape to eukaryotic cells. Many techniques have been developed to produce GUVs all having inherent advantages and disadvantages. Here, the authors show that fluorinated silica nanoparticles (FNPs) used to form Pickering emulsions in a fluorinated oil can destabilise lipid nanosystems to template the formation of GUVs. This technique enables GUV production across a broad spectrum of buffer conditions, while preventing the leakage of the encapsulated components into the oil phase. Furthermore, a simple centrifugation process is sufficient for the release of the emulsion-trapped GUVs, bypassing the need to use emulsion-destabilising chemicals. With fluorescent FNPs and transmission electron microscopy, the authors confirm that FNPs are efficiently removed, producing contaminant-free GUVs. Further experiments assessing the lateral diffusion of lipids and unilamellarity of the GUVs demonstrate that they are comparable to GUVs produced via electroformation. Finally, the ability of incorporating transmembrane proteins is demonstrated, highlighting the potential of this method for the production of GUVs for artificial cell applications.

Modulating Lipid Membrane Morphology by Dynamic DNA Origami Networks.

Membrane morphology and its dynamic adaptation regulate many cellular functions, which are often mediated by membrane proteins. Advances in DNA nanotechnology have enabled the realization of various protein-inspired structures and functions with precise control at the nanometer level, suggesting a viable tool to artificially engineer membrane morphology. In this work, we demonstrate a DNA origami cross (DOC) structure that can be anchored onto giant unilamellar vesicles (GUVs) and subsequently polymerized into micrometer-scale reconfigurable one-dimensional (1D) chains or two-dimensional (2D) lattices. Such DNA origami-based networks can be switched between left-handed (LH) and right-handed (RH) conformations by DNA fuels and exhibit potent efficacy in remodeling the membrane curvatures of GUVs. This work sheds light on designing hierarchically assembled dynamic DNA systems for the programmable modulation of synthetic cells for useful applications.

Biological responses to imazapic and methyl parathion pesticides in bioinspired lipid membranes and Tilapia fish.

Pesticide misuse has well-documented detrimental effects on ecosystems, with Nile tilapia (Oreochromis niloticus) being particularly vulnerable. The current study focuses on the impact of widely used sugarcane crop pesticides, Imazapic (IMZ) and Methyl Parathion (MP), on tilapia gill tissues and their lipid membranes. This investigation was motivated by the specific role of the lipid membrane in transport regulation. Bioinspired cell membrane models, including Langmuir monolayers and liposomes (LUVs and GUVs), were utilized to explore the interaction of IMZ and MP. The results revealed electrostatic interactions between IMZ and MP and the polar head groups of lipids, inducing morphological alterations in the lipid bilayer. Tilapia gill tissue exposed to the pesticides exhibited hypertrophic increases in primary and secondary lamellae, total lamellar fusion, vasodilation, and lifting of the secondary lamellar epithelium. These alterations can lead to compromised oxygen absorption by fish and subsequent mortality. This study not only highlights the harmful effects of the pesticides IMZ and MP, but also emphasizes the crucial role of water quality in ecosystem well-being, even at minimal pesticide concentrations. Understanding these impacts can better inform management practices to safeguard aquatic organisms and preserve ecosystem health in pesticide-affected environments.

Alkylation converts riboflavin into an efficient photosensitizer of phospholipid membranes.

A new decyl chain [-(CH2)9CH3] riboflavin conjugate has been synthesized and investigated. A nucleophilic substitution (SN2) reaction was used for coupling the alkyl chain to riboflavin (Rf), a model natural photosensitizer. As expected, the alkylated compound (decyl-Rf) is significantly more lipophilic than its precursor and efficiently intercalates within phospholipid bilayers, increasing its fluorescence quantum yield. The oxidative damage to lipid membranes photoinduced by decyl-Rf was investigated in large and giant unilamellar vesicles (LUVs and GUVs, respectively) composed of different phospholipids. Using a fluorogenic probe, fast radical formation and singlet oxygen generation was demonstrated upon UVA irradiation in vesicles containing decyl-Rf. Photosensitized formation of conjugated dienes and hydroperoxides, and membrane leakage in LUVs rich in poly-unsaturated fatty acids were also investigated. The overall assessment of the results shows that decyl-Rf is a significantly more efficient photosensitizer of lipids than its unsubstituted precursor and that the association to lipid membranes is key to trigger phospholipid oxidation. Alkylation of hydrophilic photosensitizers as a simple and general synthetic tool to obtain efficient photosensitizers of biomembranes, with potential applications, is discussed.

Preparation of Giant Vesicles with Mixed Single-Tailed and Double-Tailed Lipids.

Giant vesicles are model membrane systems that can be characterized with microscopy. Whereas most giant synthetic vesicles are created with a single phospholipid species, vesicles with mixed membrane compositions, including single-tailed and double-tailed lipids, serve as more accurate models of biological membranes and also have applications in the origins of life and drug delivery fields. Here we describe several approaches that can be used to create giant vesicles with mixed lipid compositions.

Cheap portable electroformed giant unilamellar vesicles preparation kit.

The membrane of a cell separates the internal and external media of the cell and contributes to a variety of important processes, including gradient maintenance and signal transduction. Synthetic lipid-made vesicles are commonly utilized as cell membrane model systems. These could be liposomes or giant unilamellar vesicles (GUVs) in most cases. Liposomes are typically less than 0.5 microns in size, limiting their use for most microscopy experiments. GUVs are a form of liposomes that ranges in size from 5 to 200 microns and are ideal for examining complex phase behaviors of biomembranes using the classical optical setting. This study details the step-by-step development of a portable, light and low-cost kit for generating GUVs by electroformation. Our kit contains an in-built electronic circuitry, and the GUV generation setup, consisting of 3 ITO-coated glasses with heating electrode connections. Approximately 600 µl of GUVs can be produced in one experiment, while the amount could be increased by changing the dimensions of the GUV generation setup. Finally, the originality of the study comes from the fact that many users from different fields unfamiliar with electronics can use our home-built cost-effective approach instead of their expensive commercial counterparts.

A DNA Segregation Module for Synthetic Cells.

The bottom-up construction of an artificial cell requires the realization of synthetic cell division. Significant progress has been made toward reliable compartment division, yet mechanisms to segregate the DNA-encoded informational content are still in their infancy. Herein, droplets of DNA Y-motifs are formed by liquid-liquid phase separation. DNA droplet segregation is obtained by cleaving the linking component between two populations of DNA Y-motifs. In addition to enzymatic cleavage, photolabile sites are introduced for spatio-temporally controlled DNA segregation in bulk as well as in cell-sized water-in-oil droplets and giant unilamellar lipid vesicles (GUVs). Notably, the segregation process is slower in confinement than in bulk. The ionic strength of the solution and the nucleobase sequences are employed to regulate the segregation dynamics. The experimental results are corroborated in a lattice-based theoretical model which mimics the interactions between the DNA Y-motif populations. Altogether, engineered DNA droplets, reconstituted in GUVs, can represent a strategy toward a DNA segregation module within bottom-up assembled synthetic cells.

Screening of Protein-Based Ultrasmall Nanozymes for Building Cell-Mimicking Catalytic Vesicles.

Enzymes are an important component for bottom-up building of synthetic/artificial cells. Nanozymes are nanomaterials with intrinsic enzyme-like properties, however, the construction of synthetic cells using nanozymes is difficult owing to their high surface energy or large size. Herein, the authors show a protein-based general platform that biomimetically integrates various ultrasmall metal nanozymes into protein shells. Specifically, eight metal-based ultrasmall nano-particles/clusters are in situ incorporated into ferritin nanocages that are self-assembled by 24 subunits of ferritin heavy chain. As a nanozyme generator, such a platform is suitable for screening the desired enzyme-like activities, including peroxidase (POD), oxidase (OXD), catalase (CAT) and superoxide dismutase (SOD). After screening, it is found that Ru intrinsically possesses the highest POD-like and CAT-like activities, while Mn and Pt show the highest OXD-like and SOD-like activities, respectively. Additionally, the inducers/inhibitors of various nanozymes are screened from more than 50 compounds to improve or inhibit their enzyme-like activities. Based on the screened nanozymes and their inhibitors, a proof-of-conceptually constructs cell-mimicking catalytic vesicles to mimic or modulate the events of redox homeostasis in living cells. This study offers a type of artificial metalloenzyme based on nanotechnology and shows a choice for bottom-up enzyme-based synthetic cell systems in a fully synthetic manner.

Micromechanics of Biomembranes.

Micromechanics techniques are playing an increasing role in characterization of biomembranes. The mechanical properties of membranes play an important role for a whole range of cellular processes. Lipid-protein biomembranes display lateral heterogeneity, domain formation, and morphological changes at mesoscopic and nanoscopic length scales. An attempt is made to introduce how membrane's material properties can be measured. Both fluctuation analysis and micro-pipette aspiration experiments have been used to quantify the micromechanics of membranes. The relationship between the structure and function of biomembranes is a critical concern in modern biology. This overview calls for a deeper understanding of how the cell complexity might be related to the mechanical properties of the lipid-protein membrane. Mechanical properties can influence cellular response to processes like adhesion, transport, differentiation, proliferation and migration.

Optimization of Giant Unilamellar Vesicle Electroformation for Phosphatidylcholine/Sphingomyelin/Cholesterol Ternary Mixtures.

Artificial vesicles are important tools in membrane research because they enable studying membrane properties in controlled conditions. Giant unilamellar vesicles (GUVs) are specially interesting due to their similarity in size to eukaryotic cells. We focus on optimization of GUV production from phosphatidylcholine/sphingomyelin/cholesterol mixtures using the electroformation method. This mixture has been extensively researched lately due to its relevance for the formation of lipid rafts. We measured the effect of voltage, frequency, lipid film thickness, and cholesterol (Chol) concentration on electroformation successfulness using spin-coating for reproducible lipid film deposition. Special attention is given to the effect of Chol concentrations above the phospholipid bilayer saturation threshold. Such high concentrations are of interest to groups studying the role of Chol in the fiber cell plasma membranes of the eye lens or development of atherosclerosis. Utilizing atomic force and fluorescence microscopy, we found the optimal lipid film thickness to be around 30 nm, and the best frequency-voltage combinations in the range of 2-6 V and 10-100 Hz. Increasing the Chol content, we observed a decrease in GUV yield and size. However, the effect was much less pronounced when the optimal lipid film thickness was used. The results underline the need for simultaneous optimization of both electrical parameters and thickness in order to produce high-quality GUVs for experimental research.

A biophysical perspective of the regulatory mechanisms of ezrin/radixin/moesin proteins.

Many signal transductions resulting from ligand-receptor interactions occur at the cell surface. These signaling pathways play essential roles in cell polarization, membrane morphogenesis, and the modulation of membrane tension at the cell surface. However, due to the large number of membrane-binding proteins, including actin-membrane linkers, and transmembrane proteins present at the cell surface, the molecular mechanisms underlying the regulation at the cell surface are yet unclear. Here, we describe the molecular functions of one of the key players at the cell surface, ezrin/radixin/moesin (ERM) proteins from a biophysical point of view. We focus our discussion on biophysical properties of ERM proteins revealed by using biophysical tools in live cells and in vitro reconstitution systems. We first describe the structural properties of ERM proteins and then discuss the interactions of ERM proteins with PI(4,5)P2 and the actin cytoskeleton. These properties of ERM proteins revealed by using biophysical approaches have led to a better understanding of their physiological functions in cells and tissues. Supplementary Information: The online version contains supplementary material available at 10.1007/s12551-021-00928-0.

Super-Resolution Imaging of Highly Curved Membrane Structures in Giant Vesicles Encapsulating Molecular Condensates.

Molecular crowding is an inherent feature of cell interiors. Synthetic cells as provided by giant unilamellar vesicles (GUVs) encapsulating macromolecules (poly(ethylene glycol) and dextran) represent an excellent mimetic system to study membrane transformations associated with molecular crowding and protein condensation. Similarly to cells, such GUVs exhibit highly curved structures like nanotubes. Upon liquid-liquid phase separation their membrane deforms into apparent kinks at the contact line of the interface between the two aqueous phases. These structures, nanotubes, and kinks, have dimensions below optical resolution. Here, these are studied with super-resolution stimulated emission depletion (STED) microscopy facilitated by immobilization in a microfluidic device. The cylindrical nature of the nanotubes based on the superior resolution of STED and automated data analysis is demonstrated. The deduced membrane spontaneous curvature is in excellent agreement with theoretical predictions. Furthermore, the membrane kink-like structure is resolved as a smoothly curved membrane demonstrating the existence of the intrinsic contact angle, which describes the wettability contrast of the encapsulated phases to the membrane. Resolving these highly curved membrane structures with STED imaging provides important insights in the membrane properties and interactions underlying cellular activities.

Methods for Forming Giant Unilamellar Fatty Acid Vesicles.

Fatty acids readily assemble into bilayer membranes at a pH near their apparent pKa. Fatty acid vesicles are not only useful for research in the fields of origins of life, soft matter science, biophysics, and drug delivery, but are also cost-effective and easy to manipulate, making them ideal for teaching students about self-assembly and lipid bilayers. Here, we describe simple ways to make giant, unilamellar fatty acid vesicles suitable for microscopy and encapsulation studies.

Giant Unilamellar Vesicle Electroformation: What to Use, What to Avoid, and How to Quantify the Results.

Since its inception more than thirty years ago, electroformation has become the most commonly used method for growing giant unilamellar vesicles (GUVs). Although the method seems quite straightforward at first, researchers must consider the interplay of a large number of parameters, different lipid compositions, and internal solutions in order to avoid artifactual results or reproducibility problems. These issues motivated us to write a short review of the most recent methodological developments and possible pitfalls. Additionally, since traditional manual analysis can lead to biased results, we have included a discussion on methods for automatic analysis of GUVs. Finally, we discuss possible improvements in the preparation of GUVs containing high cholesterol contents in order to avoid the formation of artifactual cholesterol crystals. We intend this review to be a reference for those trying to decide what parameters to use as well as an overview providing insight into problems not yet addressed or solved.

Sizing of giant unilamellar vesicles using a metal mesh with a high opening ratio.

Size control of giant unilamellar vesicles (GUVs) has been challenged extensively for realizing quantitative assays within these biomimetic reactors. Although microfluidics-based monodisperse GUV generation methods have shown tremendous progress, they are often difficult and still not available for general users. Meanwhile, the conventional bulk methods, which are more flexible in compositions, only generate polydisperse GUVs with a linear dimension ranging more than two orders of magnitude. Here, we characterized the sizing protocol of GUVs using the metal mesh with a large opening area ratio (>35%). Unlike the conventional track-etched membrane filters with a small opening area ratio (<10%), the present method enabled fast filtration (<10 min) to remove GUVs smaller than the mesh size without delicate flow control. We demonstrated that the combination of extrusion and filtration with selected filters produced GUV populations with fairly narrow size distributions (<30% C.V. in diameter).

Integrin-Functionalised Giant Unilamellar Vesicles via Gel-Assisted Formation: Good Practices and Pitfalls.

Giant unilamellar vesicles (GUV) are powerful tools to explore physics and biochemistry of the cell membrane in controlled conditions. For example, GUVs were extensively used to probe cell adhesion, but often using non-physiological linkers, due to the difficulty of incorporating transmembrane adhesion proteins into model membranes. Here we describe a new protocol for making GUVs incorporating the transmembrane protein integrin using gel-assisted swelling. We report an optimised protocol, enumerating the pitfalls encountered and precautions to be taken to maintain the robustness of the protocol. We characterise intermediate steps of small proteoliposome formation and the final formed GUVs. We show that the integrin molecules are successfully incorporated and are functional.

ESCRT-III induces phase separation in model membranes prior to budding and causes invagination of the liquid-ordered phase.

Membrane fission triggered by the endosomal sorting complex required for transport (ESCRT) is an important process observed in several pathogenic and non-pathogenic cellular events. From a synthetic-biology viewpoint, ESCRT proteins represent an interesting machinery for the construction of cell mimetic sub-compartments produced by fission. Since their discovery, the studies on ESCRT-III-mediated action, have mainly focused on protein dynamics, ignoring the role of lipid organization and membrane phase state. Recently, it has been suggested that membrane buds formed by the action of ESCRT-III are generated from transient microdomains in endosomal membranes. However, the interplay between membrane domain formation and ESCRT remodeling pathways has not been investigated. Here, giant unilamellar vesicles made of ternary lipid mixtures, either homogeneous in phase or exhibiting liquid-ordered/liquid-disordered phase coexistence, were employed as a model membrane system. These vesicles were incubated with purified recombinant ESCRT-III proteins from the parasite Entamoeba histolytica. In homogeneous membranes, we observe that EhVps32 can trigger domain formation while EhVps20 preferentially co-localizes in the liquid disordered phase. The addition of EhVps24 appears to induce the formation of intraluminal vesicles produced from the liquid-ordered phase. In phase separated membranes, the intraluminal vesicles are also generated from the liquid-ordered phase and presumably emerge from the phase boundary region. Our findings reinforce the hypothesis that ESCRT-mediated remodeling depends on the membrane phase state. Furthermore, the obtained results point to a potential synthetic biology approach for establishing eukaryotic mimics of artificial cells with microcompartments of specific membrane composition, which can also differ from that of the mother vesicle.