Rapid immunochemical methods for the analysis of proquinazid in strawberry QuEChERS extracts.

Proquinazid is a new-generation fungicide authorized in the EU for combating powdery mildew infections in high-value crops. Due to the perishable nature of fruits, alternative analytical methods are necessary to protect consumer's health from pesticide residues. Currently, immunoassays are a well-established approach for rapidly monitoring chemical contaminants. However, the production of high-quality immunoreagents, such as antibodies and bioconjugates, is essential. This study presents a newly designed hapten that maintains the characteristic moieties of proquinazid unmodified. The linear aliphatic substituents of this molecule were used to introduce the spacer arm. A three-step synthesis strategy was optimized to prepare a hapten that displays the entire 6-iodoquinazolin-4(3H)-one moiety with excellent yields. The N-hydroxysuccimidyl ester of the hapten was activated and purified to prepare a protein conjugate with high hapten density, which was used as an immunogen. Antibodies were raised and competitive enzyme-linked immunosorbent assays were developed. To enhance the assay's sensitivity, two additional heterologous haptens were prepared by modifying the halogenated substituent at C-6. The optimized assays demonstrated low limits of detection in buffer, approximately 0.05 µg/L. When applied to the analysis of proquinazid in QuEChERS extracts of strawberry samples, the immunoassays produced precise and accurate results, particularly in the 10-1000 µg/kg range.

Preparation of high-affinity and high-specificity monoclonal antibody and development of ultra-sensitive immunoassay for the detection of 1-aminohydantoin, the metabolite of nitrofurantoin.

1-Aminohydantoin (AHD), the residual marker of nitrofurantoin, is usually detected after derivatisation using the derivatisation reagent 2-nitrobenzaldehyde. Avoiding the antibody recognition of the derivatisation reagent is essential for the accurate detection of AHD residues. In this paper, a novel hapten called hapten D was designed, and then, a monoclonal antibody that did not recognise 2-nitrobenzaldehyde was prepared based on this novel hapten. An ultra-sensitive indirect competitive enzyme linked-immunosorbent assay (icELISA) was established under optimal conditions. The 50% inhibition concentration and limit of detection of AHD were 0.056 and 0.0060 ng/mL, respectively, which improved the sensitivity by 9-37-fold compared with the previously reported icELISA methods. The average recovery rates were 88.1%-97.3%, and the coefficient of variation was <8.6%. The accuracy and reliability of the icELISA were verified using liquid chromatography-tandem mass spectrometry. These results demonstrated that the developed icELISA is a useful and reliable tool.

Fluorescence immunosensor based on a specific monoclonal antibody for highly sensitive and rapid detection of gizzerosine in feed.

Gizzerosine is a biogenic amine produced in fish meal drying process and posted higher mortality due to gizzard erosion in poultry than histamine. However, it is difficult to obtain gizzerosine and achieve sensitive practical detection due to its simple structure. Herein, a monoclonal antibody (mAb) specific to gizzerosine was generated based on the new structural design and a fluorescence immunosensor for sensitive and on-site detection of gizzerosine in feed was first established. Molecular modeling of the three-dimensional (3D) structure and surface electrostatic potential of gizzerosine indicated that the carbonyl group of gizzerosine hapten might affect the important sites of antigen-antibody interactions. The proposed structure was used to obtain the sensitive and specific mAb with IC50 of 3.88 ng/mL in indirect competitive ELISA which was approximately 100-fold lower than that of direct competitive ELISA. Considering the practical application scenarios, a fluorescence immunosensor based on microporous dry method integrated with independent quality control line was established to improve detection stability. Under the optimum conditions, the proposed immunosensor showed a good linear relationship from 1.10 to 19.78 ng/mL and provided a low detection limit of 50 ng/g which was approximately 80-fold lower than the maximum recommended amount (0.4 mg/kg) of gizzerosine in feed. The recoveries of 6 kinds of feed ranged from 83.1 % to 114.3 %, which was in good consistence with that of UHPLC-MS/MS. Overall, this work provides a fast, cost-effective and reliable on-site tool for rapid screening of gizzerosine residues in feed samples.

Visual authenticating hazardous adulterant phenolphthalein in slimming foods: Target-mimicking hapten epitope improved immunoassay.

Screening for the hazardous adulterant phenolphthalein (PTH) in slimming foods is necessary. Herein, the linkage of the PTH target epitope with various spacer arms was proposed for hapten design, aiming to produce highly sensitive and specific antibodies targeting PTH. To understand the influence of spacer arms on epitope, comprehensive evaluations were conducted using computer-aided chemistry and animal immunization. The resulting antibody exhibited maximal half-inhibitory concentration (IC50) of 0.25 ng/mL. Then, a lateral flow immunoassay (LFIA) was established with detection capability for screening (CCß) of less than 140, 240, and 25 ng/g for PTH in tea, instant coffee, and oral liquid, respectively. Furthermore, blind sample results agreed well with LFIA and liquid chromatography-tandem mass spectrometry (LC-MS/MS). Therefore, this work not only provides a robust tool for detecting PTH adulteration but also suggests that the careful pairing of spacer arms with hapten epitope is a key factor in advancing rational hapten design.

The hapten rigidity improves antibody performances in immunoassay for rifamycins: Immunovalidation and molecular mechanism.

The immunogenicity of haptens determines the performance of the resultant antibody for small molecules. Rigidity is one of the basic physicochemical properties of haptens. However, few studies have investigated the effect of hapten rigidity on the strength of an immune response and overall antibody performance. Herein, we introduce three molecular descriptors that quantify hapten rigidity. By using of these descriptors, four rifamycin haptens with varied rigidity were designed. The structural and physicochemical feasibility of the designed haptens was then assessed by computational chemistry. Immunization demonstrated that the strength of induced immune responses, i.e., the titer and affinity of antiserum, was significantly increased with increased rigidity of haptens. Furthermore, molecular dynamic simulations demonstrated conformation constraint of rigid haptens contributed to the initial binding and activation of naïve B cells. Finally, a highly sensitive indirect competitive enzyme-linked immunosorbent assay was developed for detection of rifaximin, with an IC50 of 1.1 µg/L in buffer and a limit of detection of 0.2-11.3 µg/L in raw milk, river water, and soil samples. This work provides new insights into the effect of hapten rigidity on immunogenicity and offers new hapten design strategies for antibody discovery and vaccine development of small molecules.

Rapid immunoassays for the detection of quinoxalines and their metabolites residues in animal-derived foods: A review.

Quinoxalines are a class of veterinary drugs with antibacterial and growth-promoting functions. They are often widely used to treat and prevent animal diseases and are illegally used as animal growth promoters to increase economic benefits. Quinoxalines could be easily metabolized in animals to various residue markers and remain in animal-derived foods, which would pose a serious threat to human health. Consequently, it is necessary to detect the residues of quinoxalines and their metabolites. This article reviewed and evaluated immunoassays for quinoxalines and their metabolites in animal-derived foods, mainly including enzyme-linked immunosorbent assays, fluorescence immunosorbent assays, immunochromatography, and surface plasmon resonance biosensors. In addition, we deeply explored the design of haptens for quinoxalines and their metabolites and analyzed the effect of haptens on antibody performance. This paper aims to provide guidance and references for their accurate and sensitive detection, thereby ensuring food safety and human public health.

Development of an immunoassay based on a specific antibody for the detection of diphenyl ether herbicide fomesafen.

Fomesafen belongs to the diphenyl ether herbicide, and is widely used in the control of broadleaf weeds in crop fields due to its high efficiency and good selectivity. The residual of fomesafen in soil has a toxic effect on subsequent sensitive crops and the microbial community structure because of its long residual period. Therefore, an efficient method for detecting fomesafen is critical to guide the correct and reasonable use of this herbicide. Rapid and sensitive immunoassay methods for fomesafen is unavailable due to the lack of specific antibody. In this study, a specific antibody for fomesafen was generated based on rational design of haptens and a sensitive immunoassay method was established. The half maximal inhibitory concentration (IC50) of the immunoassay was 39 ng/mL with a linear range (IC10-90) of 1.92-779.8 ng/mL. In addition, the developed assay had a good correlation with the standard UPLC-MS/MS both in the spike-recovery studies and in the detection of real soil samples. Overall, the developed indirect competitive enzyme immunoassay reported here is important for detecting and quantifying fomesafen contamination in soil and other environmental samples with good sensitivity and high reproducibility.

Novel hapten design, highly sensitive monoclonal antibody production, and immunoassay development for rapid screening of illegally added chloramphenicol in cosmetics.

Hapten design and synthesis have been regarded as the key factor to generate high-quality antibodies. In the present study, a novel hapten of chloramphenicol was synthesized, characterized and compared with two conventional haptens. The new hapten generated mAb 4B5 showed higher sensitivity and titer than the other two haptens-based mAbs. The haptens synthesized with the structure of chloramphenicol base generated more sensitive antibodies than the hapten with chloramphenicol succinate, and the spacer arm linked to the phenyl group hapten elicited the strongest antibody response. After optimization, a direct competitive enzyme-linked immunosorbent assay (dcELISA) and a lateral flow immunoassay (LFIA), both based on the mAb 4B5, were developed. The dcELISA had a half maximum inhibition concentration of 0.23 ng/mL and the LFIA showed a cutoff value of 5-10 ng/mL. The LFIA was applied to detect illegally-added chloramphenicol samples in anti-acne cosmetics, five out of 19 samples were tested chloramphenicol containing within 10 min, which result was confirmed with the dcELISA and HPLC. The LFIA has an adequate sensitivity and can be used as a point of care diagnostic device for rapidly screening chloramphenicol in cosmetics.

Production of monoclonal antibody against tylosin and tilmicosin with homogeneous cross-reactivity and its application in lateral flow immunoassay.

To avoid false negative results due to the low cross-reactivity rate (CR) in rapid immunoassay, a group-specific antibody with homogeneous CR toward target compounds is needed for accuracy. In this study, tylosin (TYL) and tilmicosin (TM) were selected as model molecules. Firstly, two-dimensional similarity, electrostatic potential energy, spatial conformation and charge distribution of the haptens TYL-CMO, TYL-6-ACA, TYL-4-APA, TYL-CHO and DES-CMO and target compounds of TYL and TM were obtained using Gaussian 09W and Discovery Studio. The optimal hapten was DES-CMO because it is the most similar to TYL and TM. Subsequently, the mAb 14D5 cell line was obtained with IC50 values of 1.59 and 1.72 ng/mL for TYL and TM, respectively, and a CR of 92.44%. Finally, amorphous carbon nanoparticles (ACNPs) were conjugated with mAb 14D5 to develop an accurate lateral flow immunoassay (LFA) for detection of TYL and TM by the reflectance value under natural light. The recoveries of TYL and TM ranged from 77.18 to 112.04% with coefficient of variation < 13.43%. The cut-off value in milk samples was 8 ng/mL, and the limits of detection were 11.44, 15.96, 22.29 and 25.53 µg/kg for chicken muscle, bovine muscle, porcine muscle and porcine liver samples, respectively, and the results being consistent with HPLC-UV. The results suggest that the developed LFA is accurate and potentially useful for on-site screening of TYL and TM in milk and animal tissue samples.

Immunotechniques for the Group Determination of Macrolide Antibiotics Traces in the Environment Using a Volume-Mediated Sensitivity Enhancement Strategy.

Macrolide antibiotics, which are effective antimicrobial agents, are intensively used in human and veterinary medicine, as well as in agriculture. Consequently, they are found all over the world as environmental pollutants, causing harm to sensitive ecological communities and provoking a selection of resistant forms. A novel azithromycin derivative, which was used as hapten conjugate, ensured the group immunorecognition of six major macrolide representatives (105-41%), namely erythromycin, erythromycin ethylsuccinate, clarithromycin, roxithromycin, azithromycin, and dirithromycin in a competitive immunoassay based on anti-clarithromycin antibodies. The heterologous hapten-based ELISA format resulted in a 5-fold increase in sensitivity, with an IC50 value of 0.04 ng/mL for erythromycin. In this study, we proposed an underexploited strategy in an immunoassay field to significantly improve the detectability of analytes in environmental samples. Unlike most approaches, it does not require special enhancers/amplifiers or additional concentration/extraction procedures; instead, it involves analyzing a larger volume of test samples. A gradual volume increase in the samples (from 0.025 to 10 mL) analyzed using a direct competitive ELISA, immunobeads, and immunofiltration assay formats based on the same reagents resulted in a significant improvement (more than 50-fold) in assay sensitivity and detection limit up to 5 and 1 pg/mL, respectively. The suitability of the test for detecting the macrolide contamination of natural water was confirmed by the recovery of macrolides from spiked blank samples (71.7-141.3%). During 2022-2023, a series of natural water samples from Lake Onega and its influents near Petrozavodsk were analyzed, using both the developed immunoassay and HPLC-MS/MS. The results revealed no contamination of macrolide antibiotic.

Development of a Lateral Flow Immunoassay Based on a Highly Specific Monoclonal Antibody To Detect 4-Methylaminoantipyrine.

To avoid false-positive results in immunoassays due to cross-reactivity of antibodies with structural analogues, especially metabolites of target compounds, the preparation of highly specific antibodies is crucial. Preserving the characteristic structure of a target compound when designing a hapten is important when preparing highly specific antibodies. Here, we designed a novel hapten, 4-(((1,5-dimethyl-3-oxo-2-phenyl-2,3-dihydro-1H-pyrazol-4yl)amino)methyl)benzoic acid, named AA-BA, to improve the specificity of antibodies for detection of 4-methylaminoantipyrine (MAA), a residual marker of dipyrone, an important antipyretic-analgesic and anti-inflammatory drug. The structural features of the hapten remained almost the same as those of MAA. After experimental validation, monoclonal antibody 6A4 (mAb 6A4) was prepared with the half maximal inhibitory concentration (IC50) value of 4.03 ng/mL and negligible cross-reactivity with dipyrone metabolites and other antibiotics. In addition, a specific lateral flow immunoassay (LFA) strip based on colloidal gold was developed for screening MAA with a cutoff value of 25 ng/mL in milk. The developed LFA is a useful tool for rapid and accurate detection of MAA.

The influence of hapten spacer arm length on antibody response and immunoassay development.

Antibodies against small molecules with high titer and high affinity are always pursued in the field of vaccines for drugs of abuse, antidotes to toxins and immunoassays in medical, environmental, and food safety. The exposure degree of the target molecule to the immune system is critical to induce a strongly specific antibody response, thus, the spacer arm length between the target molecule and carrier protein plays an important role. However, the influence of spacer arm length on antibody titer, affinity, and assay performance is not yet clear and highly demanded to be addressed. In the present study, we proposed a model study to answer the question by using two typical small molecules, melamine and p-nitroaniline, which were introduced by varied spacer arms with increasing alkane linear length from 2 to 12 carbon atoms brick by brick. The spacer arm lengths of the haptens were obtained by computational chemistry. The titer and affinity of mouse antisera were analyzed and compared, showing that all haptens with spacer arms of 6-8 carbon atoms, i.e. 6.3-8.8 Å in length, induced strong antibodies represented by the highest titer and affinity without exception, while the haptens with spacer arms of 2-4 carbon atoms and 10-12 carbon atoms, i.e. 1.5-3.9 Å and 11.3-13.9 Å in length, failed to induce high-quality antibody response. Moreover, the titer and sensitivity of the subsequently developed immunoassays were significantly affected by using coating haptens with different spacer arm lengths, and coating haptens with a spacer arm of 6.3-8.8 Å in length delivered the optimum detection performance. The antibody recognition mechanism study further confirmed that the hapten spacer arm length had a critical effect on the recognition properties of the induced antibody, which should be interactive with the spacer arm each other. This study showed that the hapten with appropriate spacer arm length is important to antibody response and immunoassay development, providing a valuable and general clue for the rational design of hapten.

Broad-specificity indirect competitive enzyme-linked immunosorbent assay for aristolochic acids: Computer-aided hapten design and molecular mechanism of antibody recognition.

Long-term dietary exposure of aristolochic acids (AAs)-contaminated food proved to be one of the main culprits of Endemic Nephropathy, renal failure; and urothelial cancer. The antibodies utilized in immunoassays for AAs suffer from low affinity and failure of recognition to the family of AAs. This study, we prepared a broad-specificity monoclonal antibody (mAb) 5H5 with highly and uniform affinity for AAs by help of computational chemistry fully exposing the AAs common structures of methoxy and hydroxyl groups. The mAb 5H5 exhibited half inhibitory concentrations of AAA, AAB, AAC, AAD were 0.03, 0.06, 0.05, 0.03 ng/mL. To explain the broad-specificity profile of mAb 5H5, molecular docking was performed. Results shown that multiple conformations of AAs can be flexibly oriented in the spacious cavity of single-chain variable fragment antibody (scFv) 5H5 and the specific hydron bonds were formed by ASN62 and GLY64 of scFV 5H5 to the nitro group of AAs which gave an explanation of the high cross-reactivity of mAb 5H5. The ELISA based on the broad-specificity mAb 5H5with detection limits of 0.04-0.11 µg/kg and 0.02-0.06 µg/kg for four AAs in flour and soil samples, respectively. The study provided a promising method for the family of AAs in environmental and food samples.

Production of high-affinity monoclonal antibody and development of immunoassay for 3-methyl-quinoxaline-2-carboxylic acid detection in swine muscle and liver.

Production of high-affinity and specific antibodies to small molecules with molecular weight (MW) lower than 200 Da is challenging. Here, we designed a novel hapten, named hapten H6, for the detection of 3-methyl-quinoxaline-2-carboxylic acid (MQCA, MW of 189 Da), a residual marker of olaquindox, one of important veterinary antibiotics. The hapten H6 maintained all structural features of MQCA, especially in mulliken atomic charge distribution. Then, a monoclonal antibody (mAb) named 8C9 was obtained with an IC50 value of 0.2 µg/L, yielding a 15.5- to 88.5-fold improvement compared to previously prepared specific antibodies against MQCA. In addition, mAb 8C9 exhibited ignorable cross-reactivity with other structural analogs. Finally, a highly sensitive and specific indirect competitive ELISA based on mAb 8C9 was developed for the detection of MQCA in swine muscle and liver samples with limit of detection values of 0.04 µg/kg and 0.09 µg/kg, respectively.

The Simultaneous Determination of Chlorpyrifos-Ethyl and -Methyl with a New Format of Fluorescence-Based Immunochromatographic Assay.

The improper and excessive use in agriculture of chlorpyrifos-methyl (CPSM) and chlorpyrifos-ethyl (CPSE) may affect the health of human beings. Herein, a fluorescence-based immunochromatographic assay (FICA) was developed for the simultaneous determination of CPSM and CPSE. A monoclonal antibody (mAb) with equal recognition of CPSM and CPSE was generated by the careful designing of haptens and screening of hybridoma cells. Instead of labeling fluorescence with mAb, the probe was labeled with goat-anti-mouse IgG (GAM-IgG) and pre-incubated with mAb in the sample. The complex could compete with CPS by coating antigen in the test line. The new format of FICA used goat-anti-rabbit IgG (GAR-IgG) conjugated with rabbit IgG labeled with fluorescence microspheres as an independent quality control line (C line). The novel strategy significantly reduced nonspecific reactions and increased assay sensitivity. Under the optimal conditions, the proposed FICA showed a linear range of 0.015-64 mg/L and limit of detection (LOD) of 0.015 mg/L for both CPSE and CPSM. The average recoveries of CPS from spiked food samples by FICA were 82.0-110.0%. The accuracy was similar to the gas chromatography-tandem mass spectrometry (GC-MS/MS) results. The developed FICA was an ideal on-site tool for rapid screening of CPS residues in foods.

Targeted preparation and recognition mechanism of broad-spectrum antibody specific to Aconitum alkaloids based on molecular modeling and its application in immunoassay.

Ester-type Aconitum alkaloids (AAs), the main medicinal ingredients of Aconitum L. herbs, could cause brain and heart damage in humans and animals and have raised concerns worldwide. In the present study, we aimed to produce a high-performance and broad-spectrum antibody and establish an immunoassay method of ester-type AAs, 3-succinyl aconitine (ACO-HS) was selected as an optimal hapten from five designed haptens comparing the similarity of stereo structure, electronic distribution, and physicochemical properties using the computer-aided molecular modeling technology. The monoclonal antibody (mAb) 1A9 exhibited broad-spectrum recognition specificity of 15 ester-type AAs was obtained and had a high sensitivity with the binding affinity (half-maximum inhibition concentration, IC50) of 0.73-130.36 µg L-1. Through molecular docking, it was found that mAb 1A9 and ester-type AAs showed a semi-enveloped structure through hydrogen bonds and hydrophobicity interaction. The amino acid residues that responsible for recognition were ARG107, GLU55, PRO113, VAL36, and SER64, and the critical structures to be recognized of AAs were acetyl group, benzoyl group, and N-linked carbon chains. The developed indirect competitive enzyme-linked immunosorbent assay (icELISA) based on mAb 1A9 allowed a sensitive determination of 15 ester-type AAs with the limit of detection (LOD) of 0.21-43.72 µg L-1, and it was suitable for the analysis of ester-type AAs in various Aconitum L. samples. These results provided an effective strategy for the preparation of targeted broad-spectrum antibodies of small molecules and proposed an icELISA method available for rapid, sensitive, and high-throughput detection of toxic ester-type AAs in Aconitum L. herbs.

Immunoassay for Natamycin Trace Screening: Bread, Wine and Other Edibles Analysis.

The antifungal drug natamycin (NAT) is widely used in medicine and in the food industry as preservative E235 for a wide variety of foods. The risk of the development of resistance to NAT and its spread in relation to other polyene antibiotics is fraught with the emergence of incurable infections. This work is devoted to the development of an immunoassay to investigate the prevalence of NAT use for food preservation. Two immunogen designs based on tetanus toxoid, conjugated to NAT through different sites of hapten molecules, were compared in antibody generation. Assay formats using heterologous coating antigens were superior for both antibodies. The ELISA variant demonstrated the highest sensitivity (IC50 = 0.12 ng/mL), and a limit of detection of 0.02 ng/mL was selected for NAT determination. The optimized extraction procedure provided a recovery rate of 72-106% for various food matrixes with variations below 12%. Cyclodextrins, as well as NAT-cyclodextrin complex formulations, showed no interference with the quantification of NAT. One hundred and six food product brands, including baked goods, wines, beers, drinks, sauces, and yogurts, were tested to assess the prevalence of the undeclared use of NAT as a preservative. The screening examination revealed three positive yogurts with an undeclared NAT incorporation of 1.1-9.3 mg/kg.

Development and application of amphotericin B immunoassay for pharmacokinetic studies and therapeutic drug monitoring in critically ill patients.

Amphotericin B (ATB) is a broad spectrum antibiotic used to combat severe systemic fungal and protozoan infections. Existing and new ATB formulations designed to address the problem of poor solubility and side effects of ATB require pharmacokinetic (PK) studies and dosing controls, especially in critically ill patients. Given that, the present study was devoted to development of competitive immunoassay of ATB and its testing on real human serum samples. A novel immunogen design was based on alternative ATB carboxyl-mediated conjugation to tetanus toxoid (TTd). The resulting conjugates retained antifungal (C.albicans) activity, which indicates the preservation and spatial availability of the ergosterol-binding site, bioactive polyene epitope. Antibody generated against click reaction product, TTd-ATB(cuaac), was able to recognize a group of polyenes ATB, nystatin, natamycin and deoxycholate ATB in heterologous ELISA as 100%, 255%, 99% and 70%, respectively. The sensitivity (IC50), detection limit (IC10) and dynamic range of assay (IC20-IC80) were 6.0, 0.1 and 0.6-46 ng/mL, respectively, and made it possible to quantify total and unbound ATB in the therapeutic range of concentrations in serum. ATB recovery from spiked serum samples was in the range of 95-106% and unbound ATB fractions in ultrafiltrates were about 12%. PK parameters were estimated in single COVID-19 patient with secondary lung Rhizopus microspores infection who was treated with ATB and received veno-venous extracorporeal membrane oxygenation.

Progress in Immunoassays of Toxic Alkaloids in Plant-Derived Medicines: A Review.

Plants are the cradle of the traditional medicine system, assuaging human or animal diseases, and promoting health for thousands of years. However, many plant-derived medicines contain toxic alkaloids of varying degrees of toxicity that pose a direct or indirect threat to human and animal health through accidental ingestion, misuse of plant materials, or through the food chain. Thus, rapid, easy, and sensitive methods are needed to effectively screen these toxic alkaloids to guarantee the safety of plant-derived medicines. Antibodies, due to their inherent specificity and high affinity, have been used as a variety of analytical tools and techniques. This review describes the antigen synthesis and antibody preparation of the common toxic alkaloids in plant-derived medicines and discusses the advances of antibody-based immunoassays in the screening and detection of toxic alkaloids in plants or other related matrices. Finally, the limitations and prospects of immunoassays for toxic alkaloids are discussed.

Alternative Hapten Design for Zearalenone Immunoreagent Generation.

Appropriate hapten design and synthesis have been identified as critical steps to generate high-performance immunoreagents and to develop sensitive and selective immunoanalytical methods. Antibodies and immunoassays for the major mycotoxin zearalenone have been reported and marketed. However, zearalenone haptens have mostly been prepared by the oxime active ester technique, and hapten characterization has generally been poor or non-existent. In the present study, novel haptens of zearalenone with longer linkers and with alternative tethering sites have been designed for immunizing and assay conjugate preparation. All of these molecules were purified and spectroscopically verified, and a structure-activity relationship evaluation was carried out. This approach revealed that the hapten with the linker at the carbonyl group generated antibodies with a higher affinity than the hapten functionalized at the phenyl moiety. Antibodies produced with the latter hapten, on the other hand, showed lower cross-reactivity values to the major zearalenone metabolites. Finally, similar immunoassay sensitivity was achieved with all of the antibodies when heterologous haptens were employed. Furthermore, by altering the structure of the competing antigen, the immunoassay selectivity was modified. These results demonstrate that immunochemical methods for zearalenone rapid analysis can still be improved in terms of sensitivity and selectivity.