Enhanced Skin Permeation of 5-Fluorouracil through Drug-in-Adhesive Topical Patches.

5-fluorouracil (5-FU), commercially available as a topical product, is approved for non-melanoma skin cancer (NMSC) treatment with several clinical limitations. This work aimed to develop 5-FU-loaded topical patches as a potential alternative to overcome such drawbacks. The patches offer accurate dosing, controlled drug release and improved patient compliance. Our study highlights the development of Eudragit® E (EuE)-based drug-in-adhesive (DIA) patches containing a clinically significant high level of 5-FU (approximately 450 µg/cm2) formulated with various chemical permeation enhancers. The patches containing Transcutol® (Patch-TRAN) or oleic acid (Patch-OA) demonstrated significantly higher skin penetration ex vivo than their control counterpart, reaching 5-FU concentrations of 76.39 ± 27.7 µg/cm2 and 82.56 ± 8.2 µg/cm2, respectively. Furthermore, the findings from in vitro permeation studies also validated the superior skin permeation of 5-FU achieved by Patch-OA and Patch-TRAN over 72 h. Moreover, the EuE-based DIA patch platform demonstrated suitable adhesive and mechanical properties with an excellent safety profile evaluated through an inaugural in vivo human study involving 11 healthy volunteers. In conclusion, the DIA patches could be a novel alternative option for NMSC as the patches effectively deliver 5-FU into the dermis layer and receptor compartment ex vivo for an extended period with excellent mechanical and safety profiles.

Development of a tadalafil transdermal formulation and evaluation of its ability to in vitro transdermal permeate using Strat-M® membrane.

Tadalafil (TDF) has low water solubility, high intestinal permeability and belongs to the Biopharmaceutics Classification System (BCS) Class II. Due to high intestinal permeability, only oral administration (tablets) and oral thin film formulations have been developed. Therefore, it is necessary to develop various formulations, such as external formulations and transdermal absorption formulations requested by patients. The purpose of this study is to improve the solubility and skin permeability of TDF, and to develop a novel transdermal formulation with secured stability over time. The research strategy is to determine solvents that will improve TDF solubility and to screen substances that will enhance TDF permeability. Skin penetration tests were simulated by using a Strat-M® membrane in Franz diffusion cell systems. The optimal formulation (F1, consisting of TDF/HDTMA-Br at a ratio of 1:10 [weight/weight] in DPG) observed the highest permeability compared to all formulations in PBS (pH 7.4). Changes in thermal property of F1 formulation was observed and maintained its stability over 12 months including drug content (µg/mL), appearance, pH, and permeation (µg/cm2). In conclusion, DPG played a supported role in improving both TDF solubilization and permeability, whereas HDTMA-Br played a key role in enhancing permeability. It is thought that these results will be supplemented in the future to conduct research and experiments on humans.

Hydrogel Formulations for Topical Insulin Application: Preparation, Characterization and In Vitro Permeation across the Strat-M® Membrane.

Insulin has shown efficacy in the treatment of hard-to-heal wounds, which is mainly due to its role in regulating oxidative stress and inflammatory reactions. The aim of this study was to develop an insulin-hydrogel carrier based on Sepineo™ P 600 and Sepineo™ PHD 100 for application to lesional skin. Preformulation studies of the developed formulations were performed in terms of analysis of the pharmaceutical availability of insulin from the hydrogels through the Strat-M® membrane, and rheological and texture measurements. Insulin is released in a prolonged manner; after a time of 6.5 h, 4.01 IU/cm2 (53.36%) and 3.69 IU/cm2 (47.4%) of the hormone were released from the hydrogel based on Sepineo™ P 600 and Sepineo™ PHD 100, respectively. Rheological analysis showed that the hydrogels tested belong to non-Newtonian, shear-thinning systems with yield stress. The insulin-hydrogel based on Sepineo™ P 600 and Sepineo™ PHD 100 shows optimal application properties. The results obtained provide a basis for further preclinical and clinical studies.

Influence of sebum proportion in synthetic sweat on dermal bioaccessibility and on permeation of metal(loid)s from contaminated soils.

Even if dermal exposure to metal(loid)s from contaminated soils has received less attention than oral and inhalation exposure, the human health risk can be significant for some contaminants and exposure scenarios. The purpose of this study was to assess the influence of sebum proportion (1% v/v and 3% v/v) in two synthetic sweat formulations (EN 1811, pH 6.5 (sweat A) and NIHS 96-10, pH 4.7 (sweat B)) on As, Cr, Cu, Ni, Pb, and Zn dermal bioaccessibility and on subsequent diffusion through synthetic skin. A Franz cell with a Strat-M® membrane was used to quantify permeation parameters of bioaccessible metal(loid)s. Sebum's presence in synthetic sweat formulations significantly modified bioaccessibility percentages for As, Cr, and Cu. However, sebum proportion in both sweats did not influence the bioaccessibility of Pb and Zn. Some metal(loid)s, namely As and Cu, permeated the synthetic skin membrane during permeation tests when sebum was added to sweat while no permeation was observed without sebum in sweat formulations. Depending on sweat formulation, the addition of sebum (1% v/v) increased or decreased the Cr permeation coefficients (Kp). In all cases, bioaccessible Cr was no longer permeable when extracted with 3% sebum. Ni transdermal permeation was not influenced by the presence of sebum, and no permeation was observed for Pb and Zn. Further studies on the speciation of metal(loid)s in bioaccessible extracts in the presence of sebum are recommended.

Metal(loid) speciation in dermal bioaccessibility extracts from contaminated soils and permeation through synthetic skin.

Dermal exposure to metal(loid)s from contaminated soils can contribute to health risk. Metal(loid) speciation will influence their bioaccessibility in sweat and subsequent permeation across the skin. Therefore, the speciation of the bioaccessible fraction of metal(loid)s in two synthetic sweat formulations (sweat A (pH 6.5) and B (pH 4.7)) was assessed using chemical equilibrium modelling (Visual MINTEQ). Permeation through synthetic skin and the influence of sebum in the permeation of As, Cr, Cu, Ni, Pb, and Zn were also investigated using Franz cells. Following dermal bioaccessibility tests for five Chromated Copper Arsenate (CCA)-contaminated soils and one certified soil (SQC001), mean metal(loid) bioaccessibility (%) was higher in sweat B (2.33-18.8) compared to sweat A (0.12-7.53). Arsenic was almost entirely found as As(V) in both sweats. In sweat A, comparable concentrations of Cr(III) and Cr(VI) were found whereas in sweat B, Cr was primarily present as Cr(III). Copper was primarily found as Cu2+. Bioaccessible Cr extracted from nearly all soils permeated through the Strat-M membrane when it was coated with sebum. The Cr permeation coefficient (Kp) ranged between 0.004 and 0.13 cm/h and the Kp for Cu was higher (0.024-0.52 cm/h). As, Ni, Pb, and Zn did not permeate the synthetic skin.

Single domain antibodies derived from ancient animals as broadly neutralizing agents for SARS-CoV-2 and other coronaviruses.

With severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) as an emergent human virus since December 2019, the world population is susceptible to coronavirus disease 2019 (COVID-19). SARS-CoV-2 has higher transmissibility than the previous coronaviruses, associated by the ribonucleic acid (RNA) virus nature with high mutation rate, caused SARS-CoV-2 variants to arise while circulating worldwide. Neutralizing antibodies are identified as immediate and direct-acting therapeutic against COVID-19. Single-domain antibodies (sdAbs), as small biomolecules with non-complex structure and intrinsic stability, can acquire antigen-binding capabilities comparable to conventional antibodies, which serve as an attractive neutralizing solution. SARS-CoV-2 spike protein attaches to human angiotensin-converting enzyme 2 (ACE2) receptor on lung epithelial cells to initiate viral infection, serves as potential therapeutic target. sdAbs have shown broad neutralization towards SARS-CoV-2 with various mutations, effectively stop and prevent infection while efficiently block mutational escape. In addition, sdAbs can be developed into multivalent antibodies or inhaled biotherapeutics against COVID-19.

A DNA-based non-infectious replicon system to study SARS-CoV-2 RNA synthesis.

The coronavirus disease-2019 (COVID-19) pandemic caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has seriously affected public health around the world. In-depth studies on the pathogenic mechanisms of SARS-CoV-2 is urgently necessary for pandemic prevention. However, most laboratory studies on SARS-CoV-2 have to be carried out in bio-safety level 3 (BSL-3) laboratories, greatly restricting the progress of relevant experiments. In this study, we used a bacterial artificial chromosome (BAC) method to assemble a SARS-CoV-2 replication and transcription system in Vero E6 cells without virion envelope formation, thus avoiding the risk of coronavirus exposure. Furthermore, an improved real-time quantitative reverse transcription PCR (RT-qPCR) approach was used to distinguish the replication of full-length replicon RNAs and transcription of subgenomic RNAs (sgRNAs). Using the SARS-CoV-2 replicon, we demonstrated that the nucleocapsid (N) protein of SARS-CoV-2 facilitates the transcription of sgRNAs in the discontinuous synthesis process. Moreover, two high-frequency mutants of N protein, R203K and S194L, can obviously enhance the transcription level of the replicon, hinting that these mutations likely allow SARS-CoV-2 to spread and reproduce more quickly. In addition, remdesivir and chloroquine, two well-known drugs demonstrated to be effective against coronavirus in previous studies, also inhibited the transcription of our replicon, indicating the potential applications of this system in antiviral drug discovery. Overall, we developed a bio-safe and valuable replicon system of SARS-CoV-2 that is useful to study the mechanisms of viral RNA synthesis and has potential in novel antiviral drug screening.

Formulation and Evaluation of Eudragit® RL Polymeric Double Layer Films for Prolonged-Release Transdermal Delivery of Tamsulosin Hydrochloride.

Transdermal drug delivery systems (TDDSs) were developed for prolonged tamsulosin (TMS) delivery. Double layer (DL) TDDSs were prepared using Eudragit® RL by conventional film-forming. Ethylene-vinyl acetate was used as the backing layer, triethylcitrate as plasticizer, and Capmul® PG-8-70 NF and Captex 170 EP as penetration enhancers (PEs). An increase in either drug or PE concentration caused a significant increase in drug permeation flux. Modulation of drug permeation across Strat-M® membrane was examined using a single layer (SL) having the same thickness and drug content as the DLs, while the DLs were formulated to have variable drug spatial distribution across each layer (DL 4:6 and DL 6:4). SL/TDDS showed significantly higher daily drug permeation than DL/TDDSs for the first 4 days which could be related to the presence of high TMS concentration located on the upper surface of SL/TDDS as a result of solute migration of TMS during the drying process. However, this increase was followed by a progressive linear decrease after 5 days. Deflection points that were characterized by lower drug flux had been shown by SL/TDDS at more than one-point times. In contrast, DL 4:6 and DL 6:4 TDDSs demonstrated an ability to sustain TMS delivery for up to 2 weeks.

SARS-Cov2 acute and post-active infection in the context of autoimmune and chronic inflammatory diseases.

The clinical and immunological spectrum of acute and post-active COVID-19 syndrome overlaps with criteria used to characterize autoimmune diseases such as rheumatoid arthritis (RA) and systemic lupus erythematosus (SLE). Indeed, following SARS-Cov2 infection, the innate immune response is altered with an initial delayed production of interferon type I (IFN-I), while the NF-kappa B and inflammasome pathways are activated. In lung and digestive tissues, an alternative and extrafollicular immune response against SARS-Cov2 takes place with, consequently, an altered humoral and memory T cell response leading to breakdown of tolerance with the emergence of autoantibodies. However, the risk of developing severe COVID-19 among SLE and RA patients did not exceed the general population except in those having pre-existing neutralizing autoantibodies against IFN-I. Treatment discontinuation rather than COVID-19 infection or vaccination increases the risk of developing flares. Last but not least, a limited number of case reports of individuals having developed SLE or RA following COVID-19 infection/vaccination have been reported. Altogether, the SARS-Cov2 pandemic represents an unique opportunity to investigate the dangerous interplay between the immune response against infectious agents and autoimmunity, and to better understand the triggering role of infection as a risk factor in autoimmune and chronic inflammatory disease development.

Prospects of NIR fluorescent nanosensors for green detection of SARS-CoV-2.

The pandemic of the novel coronavirus disease 2019 (COVID-19) is continuously causing hazards for the world. Effective detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) can relieve the impact, but various toxic chemicals are also released into the environment. Fluorescence sensors offer a facile analytical strategy. During fluorescence sensing, biological samples such as tissues and body fluids have autofluorescence, giving false-positive/negative results because of the interferences. Fluorescence near-infrared (NIR) nanosensors can be designed from low-toxic materials with insignificant background signals. Although this research is still in its infancy, further developments in this field have the potential for sustainable detection of SARS-CoV-2. Herein, we summarize the reported NIR fluorescent nanosensors with the potential to detect SARS-CoV-2. The green synthesis of NIR fluorescent nanomaterials, environmentally compatible sensing strategies, and possible methods to reduce the testing frequencies are discussed. Further optimization strategies for developing NIR fluorescent nanosensors to facilitate greener diagnostics of SARS-CoV-2 for pandemic control are proposed.

Highlight of potential impact of new viral genotypes of SARS-CoV-2 on vaccines and anti-viral therapeutics.

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the causal agent of the coronavirus disease (COVID-19) pandemic, has infected millions of people globally. Genetic variation and selective pressures lead to the accumulation of single nucleotide polymorphism (SNP) within the viral genome that may affect virulence, transmission rate, viral recognition and the efficacy of prophylactic and interventional measures. To address these concerns at the genomic level, we assessed the phylogeny and SNPs of the SARS-CoV-2 mutant population collected to date in Iran in relation to globally reported variants. Phylogenetic analysis of mutant strains revealed the occurrence of the variants known as B.1.1.7 (Alpha), B.1.525 (Eta), and B.1.617 (Delta) that appear to have delineated independently in Iran. SNP analysis of the Iranian sequences revealed that the mutations were predominantly positioned within the S protein-coding region, with most SNPs localizing to the S1 subunit. Seventeen S1-localizing SNPs occurred in the RNA binding domain that interacts with ACE2 of the host cell. Importantly, many of these SNPs are predicted to influence the binding of antibodies and anti-viral therapeutics, indicating that the adaptive host response appears to be imposing a selective pressure that is driving the evolution of the virus in this closed population through enhancing virulence. The SNPs detected within these mutant cohorts are addressed with respect to current prophylactic measures and therapeutic interventions.

Emergence, evolution, and vaccine production approaches of SARS-CoV-2 virus: Benefits of getting vaccinated and common questions.

The emergence of coronavirus disease 2019 (COVID-19) pandemic in Wuhan city, China at the end of 2019 made it urgent to identify the origin of the causal pathogen and its molecular evolution, to appropriately design an effective vaccine. This study analyzes the evolutionary background of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2 or SARS-2) in accordance with its close relative SARS-CoV (SARS-1), which was emerged in 2002. A comparative genomic and proteomic study was conducted on SARS-2, SARS-1, and Middle East respiratory syndrome coronavirus (MERS), which was emerged in 2012. In silico analysis inferred the genetic variability among the tested viruses. The SARS-1 genome harbored 11 genes encoding 12 proteins, while SARS-2 genome contained only 10 genes encoding for 10 proteins. MERS genome contained 11 genes encoding 11 proteins. The analysis also revealed a slight variation in the whole genome size of SARS-2 comparing to its siblings resulting from sequential insertions and deletions (indels) throughout the viral genome particularly ORF1AB, spike, ORF10 and ORF8. The effective indels were observed in the gene encoding the spike protein that is responsible for viral attachment to the angiotensin-converting enzyme 2 (ACE2) cell receptor and initiating infection. These indels are responsible for the newly emerging COVID-19 variants αCoV, ßCoV, γCoV and δCoV. Nowadays, few effective COVID-19 vaccines developed based on spike (S) glycoprotein were approved and become available worldwide. Currently available vaccines can relatively prevent the spread of COVID-19 and suppress the disease. The traditional (killed or attenuated virus vaccine and antibody-based vaccine) and innovated vaccine production technologies (RNA- and DNA-based vaccines and viral vectors) are summarized in this review. We finally highlight the most common questions related to COVID-19 disease and the benefits of getting vaccinated.

Comparison of Synthetic Membranes to Heat-Separated Human Epidermis in Skin Permeation Studies In Vitro.

In recent years, the study of dermal preparations has received increased attention. There are more and more modern approaches to evaluate transdermal formulations, which are crucial in proving the efficacy of a formulation. The aim of this study was to compare permeation across innovative synthetic membranes (Strat-M and Skin PAMPA membranes) and heat-separated human epidermis (HSE, gold standard membrane) using four different dermal formulations. The Strat-M and Skin PAMPA membranes were designed to mimic the stratum corneum layer of the human epidermis. There have also been some publications on their use in dermal formulation development, but further information is needed. Drug permeation was measured using formulations containing diclofenac sodium (two hydrogels and two creams). The HSE, Strat-M, and Skin PAMPA membranes proved to be significantly different, but based on the results, the Strat-M membrane showed the greatest similarity to HSE. The permeation data of the different formulations across different membranes showed good correlations with formulations similar to these four, which allows the prediction of permeation across HSE using these synthetic membranes. In addition, Strat-M and Skin PAMPA membranes have the potential to select and differentiate a dermal formulation containing diclofenac sodium as an early screening model.

Optimization and Evaluation of the In Vitro Permeation Parameters of Topical Products with Non-Steroidal Anti-Inflammatory Drugs through Strat-M® Membrane.

Pharmaceutical products containing non-steroidal anti-inflammatory drugs (NSAIDs) are among the most prescribed topical formulations used for analgesic and antirheumatic properties. These drugs must overcome the skin barrier to cause a therapeutic effect. Human skin has been widely used as a model to study in vitro drug diffusion and permeation, however, it suffers from many limitations. Therefore, to perform in vitro permeation test (IVPT), we used a Strat-M® membrane with diffusion characteristics well-correlated to human skin. This study's objective was to optimize the IVPT conditions using Plackett-Burman experimental design for bio-predictive evaluation of the in vitro permeation rates of five non-steroidal anti-inflammatory drugs (diclofenac, etofenamate, ibuprofen, ketoprofen, naproxen) across Strat-M® membrane from commercial topical formulations. The Plackett-Burman factorial design was used to screen the effect of seven factors in eight runs with one additional center point. This tool allowed us to set the sensitive and discriminative IVPT final conditions that can appropriately characterize the NSAIDs formulations. The permeation rate of etofenamate (ETF) across the Strat-M® membrane was 1.7-14.8 times faster than other NSAIDs from selected semisolids but 1.6 times slower than the ETF spray formulation.

In search of SARS CoV-2 replication inhibitors: Virtual screening, molecular dynamics simulations and ADMET analysis.

Severe acute respiratory syndrome has relapsed recently as novel coronavirus causing a life threat to the entire world in the absence of an effective therapy. To hamper the replication of the deadly SARS CoV-2 inside the host cells, systematic in silico virtual screening of total 267,324 ligands from Asinex EliteSynergy and BioDesign libraries has been performed using AutoDock Vina against RdRp. The molecular modeling studies revealed the identification of twenty-one macrocyclic hits (2-22) with better binding energy than remdesivir (1), marketed SARS CoV-2 inhibitor. Further, the analysis using rules for drug-likeness and their ADMET profile revealed the candidature of these hits due to superior oral bioavailability and druggability. Further, the MD simulation studies of top two hits (2 and 3) performed using GROMACS 2020.1 for 10 ns revealed their stability into the docked complexes. These results provide an important breakthrough in the design of macrocyclic hits as SARS CoV-2 RNA replicase inhibitor.

COVID-19 associated Multisystem Inflammatory Syndrome in Children (MIS-C) guidelines; revisiting the Western New York approach as the pandemic evolves.

Multisystem inflammatory syndrome of children (MIS-C) continues to be a highly concerning diagnosis in those recently infected with SARS-CoV-2. The diagnosis of MIS-C cases will likely become even more challenging as vaccine uptake and natural immunity in previously infected persons leads to lower circulating rates of SARS-CoV-2 infection and will make cases sporadic. Febrile children presenting with cardiac dysfunction, symptoms overlapping Kawasaki disease or significant gastrointestinal complaints warrant a thorough screen in emergency departments, urgent care centers, and outpatient pediatric or family medicine practices. An increased index of suspicion and discussion regarding higher level of care (transferring to pediatric tertiary care centers or to intensive care) continues to be recommended. Herein we outline a broad approach with a multidisciplinary team for those meeting the case definition and believe such an approach is crucial for successful outcomes.

Comparison of Synthetic Sweat and Influence of Sebum in the Permeation of Bioaccessible Metal(loid)s from Contaminated Soils through a Synthetic Skin Membrane.

Dermal exposure to metal(loid)s from contaminated soils has received less attention than oral and inhalation exposure. Still, it can be a relevant pathway for some contaminants. Comparison of synthetic sweats (donor solutions), the influence of sebum, and the characterization of diffusion parameters through a synthetic membrane (acting as skin surrogate) in the permeation of metal(loid)s (As, Cr, Cu, Ni, Pb, and, Zn) from polluted soils is missing. The dermal bioaccessibility tests were performed using two sweat compositions [EN 1811, pH 6.5 (sweat A) and NIHS 96-10, pH 4.7 (sweat B)]. Diffusion parameters of soluble metal(loid)s using the Franz cell methodology were calculated using the Strat-M membrane. The influence of synthetic sebum in the permeation of metal(loid)s was also investigated. The metal(loid) bioaccessibility percentage was higher for sweat B (pH 4.7) compared to sweat A (pH 6.5), attributed to lower pH of sweat B. Among the six elements tested, only chromium and copper permeated the membrane. Permeation coefficient (Kp) was higher for chromium in sweat A (0.05-0.11 cm h-1) than sweat B (0.0007-0.0037 cm h-1) likely due to a higher pH and thus more permeable Cr species. The presence of sebum increased lag times for copper permeation. Additional studies regarding speciation of metal(loid)s following extractions in synthetic sweat and comparison of synthetic membrane Strat-M and human skin in the permeation of metal(loid)s are recommended.

Current state of diagnostic, screening and surveillance testing methods for COVID-19 from an analytical chemistry point of view.

Since December 2019, we have been in the battlefield with a new threat to the humanity known as severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). In this review, we describe the four main methods used for diagnosis, screening and/or surveillance of SARS-CoV-2: Real-time reverse transcription polymerase chain reaction (RT-PCR); chest computed tomography (CT); and different complementary alternatives developed in order to obtain rapid results, antigen and antibody detection. All of them compare the highlighting advantages and disadvantages from an analytical point of view. The gold standard method in terms of sensitivity and specificity is the RT-PCR. The different modifications propose to make it more rapid and applicable at point of care (POC) are also presented and discussed. CT images are limited to central hospitals. However, being combined with RT-PCR is the most robust and accurate way to confirm COVID-19 infection. Antibody tests, although unable to provide reliable results on the status of the infection, are suitable for carrying out maximum screening of the population in order to know the immune capacity. More recently, antigen tests, less sensitive than RT-PCR, have been authorized to determine in a quicker way whether the patient is infected at the time of analysis and without the need of specific instruments.

Development of in-house ELISAs for the detection of anti-SARS­CoV­2 RBD and N IgG and IgM antibodies in biological samples.

By the end of year 2019, the new virus SARS-CoV-2 appeared, causing the Coronavirus Disease 2019 (COVID-19), and spread very fast globally. A continuing need for diagnostic tools is a must to contain its spread. Till now, the gold standard method, the reverse transcription polymerase chain reaction (RT-PCR), is the precise procedure to detect the virus. However, SARS-CoV-2 may escape RT-PCR detection for several reasons. The development of well-designed, specific and sensitive serological test like enzyme immunoassay (EIA) is needed. This EIA can stand alone or work side by side with RT-PCR. In this study, we developed several EIAs including plates that are coated with either specially designed SARS-CoV-2 nucleocapsid or surface recombinant proteins. Each protein type can separately detect anti-SARS-CoV-2 IgM or IgG antibodies. For each EIAs, the cut-off value, specificity and sensitivity were determined utilizing RT-PCR confirmed Covid-19 and pre-pandemic healthy and other viruses-infected sera. Also, the receiver operator characteristic (ROC) analysis was performed to define the specificities and sensitivities of the optimized assay. The in-house EIAs were validated by comparing against commercial EIA kits. All in-house EIAs showed high specificity (98-99%) and sensitivity (97.8-98.9%) for the detection of IgG/IgM against RBD and N proteins of SARS-CoV-2. From these results, the developed Anti-RBD and anti-N IgG and IgM antibodies EIAs can be used as a specific and sensitive tool to detect SARS-CoV-2 infection, calculate the burden of disease and case fatality rates.

Comparative analysis of mutational hotspots in the spike protein of SARS-CoV-2 isolates from different geographic origins.

The spike (S) protein mutations of SARS-CoV-2 are of major concern in terms of viral transmission and pathogenesis. Hence, we developed a PCR-based method to rapidly detect the 6 mutational hotspots (H49Y, G476S, V483A, H519Q, A520S, and D614G) in the S protein and applied this method to analyze the hotspots in the viral isolates from different geographical origins. Here, we identified that there was only the D614G mutation in the viral isolates. As of September 30, 2020, the analysis of 113,381 sequences available from the public repositories revealed that the SARS-CoV-2 variant carrying G614 has become the most prevalent form globally. Our results support recent epidemiological and genomic data demonstrating that the viral infectivity and transmission are enhanced by the S protein D614G mutation.