Optimization of fractionation with membranes of antioxidant enzymatic hydrolysate of Californian red worm (Eisenia fetida) protein.

Problem: Earthworm is a valuable source of biologically and pharmacologically active compounds, with applications in the treatment of various types of diseases; however, the main application they have been given is in the production of organic fertilizer. One of the alternatives for obtaining bioactive compounds is by means of enzymatic hydrolysis. Aim: This study proposes the optimization of the fractionation of the antioxidant enzymatic hydrolysate from Californian red worm (Eisenia fetida) protein. Methodology: For this purpose, the worms were separated and hydrolyzed using the enzyme Alcalase 2.4L for 4000s. The obtained hydrolysate was fractionated by means of a crossflow tangential ultrafiltration system, with a 3 kDa molecular weight cut-off ceramic membrane. A response surface design of the composite central factorial type was implemented to evaluate the effect of pH, transmembrane pressure, and flow factors on the response variables transmission, volume reduction factor (VRF) and permeate flow resistance. The transmissions focused on the antioxidant peptides, measured by three conventional methods such as TEAC, FRAP, ORAC, also known as TTEAC, TFRAP and TORAC, respectively. The evaluated resistances were the total resistance (Rtotal), fouling resistance (Rfouling), and gel resistance (Rgel). Result: The results showed that the three factors evaluated affect all the response variables either in their linear or quadratic terms or by some interaction. For each response variable, a mathematical model was obtained, with statistical significance and a non-significant lack of adjustment. The models obtained were used for a multi-objective optimization process in which transfers were maximized, and resistances were minimized. The efficiency of the optimum ultrafiltration process was 25 %. Conclusion: The neutral-alkaline pH is ideal for the ultrafiltration process of bioactive peptides, as it is where the highest transmissions of peptides with antioxidative capacity are found. Under optimal conditions, the 3 kDa membrane permeate was found to exhibit higher antioxidant capacity than the retentate and feed. Based on this, the fraction of less than 3 kDa emerges as a potential multifunctional ingredient, thanks to its antioxidant properties.

A Mechanistic Model for Hydrogen Production in an AnMBR Treating High Strength Wastewater.

In the global race to produce green hydrogen, wastewater-to-H2 is a sustainable alternative that remains unexploited. Efficient technologies for wastewater-to-H2 are still in their developmental stages, and urgent process intensification is required. In our study, a mechanistic model was developed to characterize hydrogen production in an AnMBR treating high-strength wastewater (COD > 1000 mg/L). Two aspects differentiate our model from existing literature: First, the model input is a multi-substrate wastewater that includes fractions of proteins, carbohydrates, and lipids. Second, the model integrates the ADM1 model with physical/biochemical processes that affect membrane performance (e.g., membrane fouling). The model includes mass balances of 27 variables in a transient state, where metabolites, extracellular polymeric substances, soluble microbial products, and surface membrane density were included. Model results showed the hydrogen production rate was higher when treating amino acids and sugar-rich influents, which is strongly related to higher EPS generation during the digestion of these metabolites. The highest H2 production rate for amino acid-rich influents was 6.1 LH2/L-d; for sugar-rich influents was 5.9 LH2/L-d; and for lipid-rich influents was 0.7 LH2/L-d. Modeled membrane fouling and backwashing cycles showed extreme behaviors for amino- and fatty-acid-rich substrates. Our model helps to identify operational constraints for H2 production in AnMBRs, providing a valuable tool for the design of fermentative/anaerobic MBR systems toward energy recovery.

Generalization and Expansion of the Hermia Model for a Better Understanding of Membrane Fouling.

One of the most broadly used models for membrane fouling is the Hermia model (HM), which separates this phenomenon into four blocking mechanisms, each with an associated parameter n. The original model is given by an Ordinary Differential Equation (ODE) dependent on n. This ODE is solved only for these four values of n, which limits the effectiveness of the model when adjusted to experimental data. This paper aims extend the original Hermia model to new values of n by slightly increasing the complexity of the HM while keeping it as simple as possible. The extended Hermia model (EHM) is given by a power law for any n ≠ 2 and by an exponential function at n = 2. Analytical expressions for the fouling layer thickness and the accumulated volume are also obtained. To better test the model, we perform model fitting of the EHM and compare its performance to the original four pore-blocking mechanisms in six micro- and ultrafiltration examples. In all examples, the EHM performs consistently better than the four original pore-blocking mechanisms. Changes in the blocking mechanisms concerning transmembrane pressure (TMP), crossflow rate (CFR), crossflow velocity (CFV), membrane composition, and pretreatments are also discussed.

Effects of solid retention time and exposure mode to electric current on Remazol Brilliant Violet removal in an electro-membrane bioreactor.

The performance of an electrochemically assisted anoxic-oxic membrane bioreactor (A/O-eMBR) was assessed as an alternative for azo dye (Remazol Brilhant Violet (RBV)) removal from simulated textile wastewater. The A/O-eMBR was operated under three experimental conditions (runs I, II, and III), in which different solids retention time (SRT) (45 and 20 d) and exposure mode to electric current (6'ON/30'OFF and 6'ON/12'OFF) were assessed. The reactor exhibited excellent decolorization performance for all runs, with average dye removal efficiency ranging from 94.3 to 98.2%. Activity batch assays showed that the dye removal rate (DRR) decreased from 16.8 to 10.2 mg RBV L-1 h-1 when the SRT was reduced from 45 to 20 d, likely attributed to the lower biomass content under lower sludge age. At the electric current exposure mode of 6' ON/12'OFF, a more substantial decrease of DRR to 1.5 mg RBV L-1 h-1 was noticed, suggesting a possible inhibitory effect on dye removal via biodegradation. By reducing the SRT to 20 d, a worse mixed liquor filterability condition was observed, with a membrane fouling rate (MFR) of 0.979 kPa d-1. In contrast, using the electric current exposure mode of 6'ON/12'OFF resulted in lower membrane fouling propensity, with an MFR of 0.333 kPa d-1. A more attractive cost-benefit ratio for dye removal was obtained using the exposure mode of 6'ON/30'OFF, for which the energy demand was estimated at 21.9-22.6 kWh kg dye-1 removed, almost two times lower than that observed for the mode of 6'ON/12'OFF.

Coagulation combined with ultraviolet irradiation activated sodium percarbonate as pretreatment prior to ultrafiltration: Analysis of free radical oxidation mechanism and membrane fouling control.

Novel pre-coagulation-sedimentation integrated with ultraviolet activated sodium percarbonate (SPC) (Fe(III)-UV/SPC) processes are promising methods for ultrafiltration (UF) pretreatment to ensure the safety of rural drinking water and mitigate UF membrane fouling. The process of surface water purification using the integrated coagulation-advanced oxidation processes (AOPs)-UF system relies on the idea that pre-coagulation can remove hydrophobic macromolecular organic compounds, thus facilitating the oxidation of hydrophilic molecules or medium-sized macromolecules to improve the utilization efficiency of free radicals in AOPs. Compared with the UV/SPC process, the removal rates of UV254 and DOC in the Fe(III)-UV/SPC process (Fe(III) = 0.1 mM, SPC = 0.5 mM) were increased from 87.39 % to 41.45 %-93.56 % and 52.51 %, respectively. Furthermore, the dosage of SPC was reduced from 0.75 mM in UV/SPC process to 0.5 mM due to effects of pre-coagulation. The free radical quenching experiment showed that a significant radical sink of reactions with organic contaminants was formed by •OH and CO3•- in the UV/SPC process, rather than a single specific radical. The destruction of the cake layer structure, reduction in contaminant concentration, and appearance of many permeable holes on the membrane surface were the main reasons for the alleviation of UF membrane fouling. Finally, the trans-membrane pressure and reversible membrane resistance decreased from 22.33 kPa to 3.68 × 1011 m-1 to 18.28 kPa and 0.93 × 1011 m-1, respectively. These results provide new insights into the behavior of membrane fouling control and offer technical references for the long-term stable operation of the UF process.

SMP Production in an Anaerobic Submerged Membrane Bioreactor (AnMBR) at Different Organic Loading Rates.

Anaerobic membrane bioreactors (AnMBRs) have demonstrated an excellent capability to treat domestic wastewater. However, biofouling reduces membrane permeability, increasing operational costs and overall energy demand. Soluble microbial products (SMPs) that build up on the membrane surface play a significant role in the biofouling. In this study, the production of SMPs in a 32 L submerged AnMBR operated at three different organic loads (3.0, 4.1 and 1.2 kg chemical oxygen demand (COD)/m3d for phases 1, 2 and 3, respectively) during long-term operation of the reactor (144, 83 and 94 days) were evaluated. The samples were taken from both the permeate and the sludge at three different heights (0.14, 0.44 and 0.75 m). Higher production of SMPs was obtained in phase 2, which was proportional to the membrane fouling. There were no statistically significant differences (p > 0.05) in the SMPs extracted from sludge at different heights among the three phases. In the permeate of phases 1, 2 and 3, the membrane allowed the removal of 56%, 70% and 64% of the SMP concentration in the sludge. SMPs were characterized by molecular weight (MW). A bimodal behavior was obtained, where fractions prevailed with an MW < 1 kDa, associated with SMPs as utilization-associated products (UAPs) caused fouling by the pore-blocking mechanism. The chemical analysis found that, in the SMPs, the unknown COD predominated over the known COD, such as carbohydrates and proteins. These results suggest that further studies in SMP characterization should focus on the unknown COD fraction to understand the membrane fouling in AnMBR systems better.

Improving knowledge about permeability in membrane bioreactors through sensitivity analysis using artificial neural networks.

Membrane bioreactor (MBR) has been widely employed for industrial effluent treatment, as its higher efficiency in removing pollutants makes effluent reuse more feasible. However, membrane fouling remains as a limiting factor for its greater diffusion. This work performed a sensitivity analysis study to investigate the effects of analytical and operating variables on membrane permeability. The case study is a MBR treating oil refinery effluents. After the identification and validation of a predictive neural model for permeability, sensitivity analysis methods based on both connection weights and variable disturbances were used to quantify and rank the variables influence. A comprehensive analysis showed that Suspended solids and Days between cleanings exerted greater effects on permeability, whereas sludge filterability and sludge temperature were less significant. In sequence, a specific analysis revealed distinct dynamics in MBR operation given different solids concentrations. For instance, from higher solids concentrations, among all the evaluated parameters, only COD presented low significance to the permeability. This evidence suggests that permeability is more susceptible to variations when operating with higher concentrations of Suspended solids. The global result of this study contributes to more efficient MBR operations since distinct relations with permeability imply different effects on membrane fouling.

Assessing the performance and microbial community of hybrid moving bed and conventional membrane bioreactors treating municipal wastewater.

A conventional (SB-CMBR) and a hybrid moving-bed (SB-HMBR) sequencing batch membrane bioreactor treating municipal wastewater were compared during their start-up in terms of organic matter and nutrient removal, membrane fouling characteristics and microbial community. Both systems exhibited similar COD, ammonium, total nitrogen (TN) and phosphorus removal efficiency, amounting up to 96%, 99%, 70% and 85%, respectively. Results from cycle tests revealed that the contribution of attached biomass to the overall ammonium removal in the hybrid reactor was marginal. Moreover, higher despite the similar phosphorus removal efficiency attained in both reactors, nitrate-dosing activity batch assays specifically revealed that the anoxic phosphate uptake rate (PUR) in the SB-HMBR was 1.71 times higher than in the SB-CMBR. Moreover, a higher frequency of Candidatus Accumulibacter-related polyphosphate-accumulating organisms was observed in the biofilm carriers of the hybrid reactor. These findings may explain why the overall PUR was almost 50% higher in the SB-HMBR. By operating the reactors in sequencing batch mode, adhesion of particles on the membrane surface was reduced while fouling was mitigated as compared to continuous MBR systems. Better filterability conditions with lower fouling rate were found in the SB-HMBR, important features of the hybrid reactor for reducing membrane cleaning-related energy demand.

Potential use of membrane bioreactor to treat petroleum refinery effluent: comprehension of dynamic of organic matter removal, fouling characteristics and membrane lifetime.

This study aims to evaluate membrane bioreactor (MBR) performance in a pilot scale to treat petroleum refinery effluent, and has been primarily focused on (1) investigation of dynamics of organic matter removal; (2) characterization of membrane fouling under real hazardous events; (3) evaluation of the effect of fouling on membrane lifetime; and (4) estimate the membrane lifetime. The results have shown that the MBR was able to effectively reduce COD, NH3-N, turbidity, color, phenol and toxicity, and bring them to the levels required to meet disposal and non-potable water reuse standards. The FTIR results showed that organic matter was removed by biological oxidation and/or retained by adsorption in the biological sludge, or retention in the UF membrane, and that SMP was produced during the treatment. In terms of membrane permeability, the results showed that soluble fraction of mixed liquor contributed significantly to membrane fouling. And finally, considering the concept of lifetime based on permeability decline, a membrane lifetime of 7 years is expected.

Performance evaluation of startup for a yeast membrane bioreactor (MBRy) treating landfill leachate.

The startup process of a membrane bioreactor inoculated with yeast biomass (Saccharomyces cerevisiae) and used in the treatment of landfill leachate was evaluated. The yeast membrane bioreactor (MBRy) was inoculated with an exogenous inoculum, a granulated active dry commercial bakers' yeast. The MBRy was successfully started up with a progressive increase in the landfill leachate percentage in the MBRy feed and the use of Sabouraud Dextrose Broth. The membrane plays an important role in the startup phase because of its full biomass retention and removal of organic matter. MBRy is a suitable and promising process to treat recalcitrant landfill leachate. After the acclimation period, the COD and NH3 removal efficiency reached values of 72 ± 3% and 39 ± 2% respectively. MBRy shows a low membrane-fouling potential. The membrane fouling was influenced by soluble microbial products, extracellular polymeric substances, sludge particle size, and colloidal dissolved organic carbon.