Antiferromagnetic Interactions through the Thirteen Å Metal-Metal Distances in Heterometallic One-Dimensional Chains.

A heterometallic and paramagnetic one-dimensional aligned chain in -Rh(+2)-Rh(+2)- Pt(+2)-Ni(+2)-Pt(+2)- with direct metal-metal bonds was obtained via HOMO-LUMO interactions at the σ* (dz2) orbital between [Rh2(O2CCH3)4] and [Pt2Ni(piam)4(NH3)4] (piam=pivalamidate). The one-dimensional chains had straight backbones attributed to face-to-face stacking of each complex, and the Ni atoms were separated by approximately 13 Šfrom four different metals. Each Ni atom had two unpaired electrons in the d-orbitals, which strongly exchanged with J=-37.9 cm-1 through the diamagnetic -Pt-Rh-Rh-Pt- bonds.

Surface-Enriched Room-Temperature Liquid Bismuth for Catalytic CO2 Reduction.

Bismuth-based electrocatalysts are effective for carbon dioxide (CO2) reduction to formate. However, at room temperature, these materials are only available in solid state, which inevitably suffers from surface deactivation, declining current densities, and Faradaic efficiencies. Here, the formation of a liquid bismuth catalyst on the liquid gallium surface at ambient conditions is shown as its exceptional performance in the electrochemical reduction of CO2 (i.e., CO2RR). By doping a trace amount of bismuth (740 ppm atomic) in gallium liquid metal, a surface enrichment of bismuth by over 400 times (30 at%) in liquid state is obtained without atomic aggregation, achieving 98% Faradic efficiency for CO2 conversion to formate over 80 h. Ab initio molecular simulations and density functional theory calculations reveal that bismuth atoms in the liquid state are the most energetically favorable sites for the CO2RR intermediates, superior to solid Bi-sites, as well as joint GaBi-sites. This study opens an avenue for fabricating high-performing liquid-state metallic catalysts that cannot be reached by elementary metals under electrocatalytic conditions.

Accessing Ta/Cu Architectures via Metal-Metal Salt Metatheses: Heterobimetallic C-H Bond Activation Affords µ-Hydrides.

We employ a metal-metal salt metathesis strategy to access low-valent tantalum-copper heterometallic architectures (Ta-µ2 -H2 -Cu and Ta-µ3 -H2 -Cu3 ) that emulate structural elements proposed for surface alloyed nanomaterials. Whereas cluster assembly with carbonylmetalates is well precedented, the use of the corresponding polyarene transition metal anions is underexplored, despite recognition of these highly reactive fragments as storable sources of atomic Mn- . Our application of this strategy provides structurally unique early-late bimetallic species. These complexes incorporate bridging hydride ligands during their syntheses, the origin of which is elucidated via detailed isotopic labelling studies. Modification of ancillary ligand sterics and electronics alters the mechanism of bimetallic assembly; a trinuclear complex resulting from dinuclear C-H activation is demonstrated as an intermediate en route to formation of the bimetallic. Further validating the promise of this rational, bottom-up approach, a unique tetranuclear species was synthesized, featuring a Ta centre bearing three Ta-Cu interactions.

High-Spin and Reactive Fe13 Cluster with Exposed Metal Sites.

Atomically defined large metal clusters have applications in new reaction development and preparation of materials with tailored properties. Expanding the synthetic toolbox for reactive high nuclearity metal complexes, we report a new class of Fe clusters, Tp*4 W4 Fe13 S12 , displaying a Fe13 core with M-M bonds that has precedent only in main group and late metal chemistry. M13 clusters with closed shell electron configurations can show significant stability and have been classified as superatoms. In contrast, Tp*4 W4 Fe13 S12 displays a large spin ground state of S=13. This compound performs small molecule activations involving the transfer of up to 12 electrons resulting in significant cluster rearrangements.

Partial Deoxygenative CO Homocoupling by a Diiron Complex.

One route to address climate change is converting carbon dioxide to synthetic carbon-neutral fuels. Whereas carbon dioxide to CO conversion has precedent in homo- and heterogeneous catalysis, deoxygenative coupling of CO to products with C-C bonds-as in liquid fuels-remains challenging. Here, we report coupling of two CO molecules by a diiron complex. Reduction of Fe2 (CO)2 L (2), where L2- is a bis(ß-diketiminate) cyclophane, gives [K(THF)5 ][Fe2 (CO)2 L] (3), which undergoes silylation to Fe2 (CO)(COSiMe3 )L (4). Subsequent C-OSiMe3 bond cleavage and C=C bond formation occurs upon reduction of 4, yielding Fe2 (µ-CCO)L. CO derived ligands in this series mediate weak exchange interactions with the ketenylidene affording the smallest J value, with changes to local metal ion spin states and coupling schemes (ferro- vs. antiferromagnetism) based on DFT calculations, Mössbauer and EPR spectroscopy. Finally, reaction of 5 with KEt3 BH or methanol releases the C2 O2- ligand with retention of the diiron core.

Metal Alloys-Structured Electrocatalysts: Metal-Metal Interactions, Coordination Microenvironments, and Structural Property-Reactivity Relationships.

Metal alloys-structured electrocatalysts (MAECs) have made essential contributions to accelerating the practical applications of electrocatalytic devices in renewable energy systems. However, due to the complex atomic structures, varied electronic states, and abundant supports, precisely decoding the metal-metal interactions and structure-activity relationships of MAECs still confronts great challenges, which is critical to direct the future engineering and optimization of MAECs. Here, this timely review comprehensively summarizes the latest advances in creating the MAECs, including the metal-metal interactions, coordination microenvironments, and structure-activity relationships. First, the fundamental classification, design, characterization, and structural reconstruction of MAECs are outlined. Then, the electrocatalytic merits and modulation strategies of recent breakthroughs for noble and non-noble metal-structured MAECs are thoroughly discussed, such as solid solution alloys, intermetallic alloys, and single-atom alloys. Particularly, unique insights into the bond interactions, theoretical understanding, and operando techniques for mechanism disclosure are given. Thereafter, the current states of diverse MAECs with a unique focus on structural property-reactivity relationships, reaction pathways, and performance comparisons are discussed. Finally, the future challenges and perspectives for MAECs are systematically discussed. It is believed that this comprehensive review can offer a substantial impact on stimulating the widespread utilization of metal alloys-structured materials in electrocatalysis.

Coordination versus Insertion: On the Interaction of 5 d-Transition Metal Carbonyl Clusters with Silver(I).

The title silver(I) complex salts [Ag{Re2 (CO)10 }{Re(CO)5 }2 ]+ [Al(ORF )4 ]- (AgRe4 ; ORF =-OC(CF3 )3 ) and [Ag{Ir4 (CO)12 }2 ]+ [Al(ORF )4 ]- (AgIr8 ) form upon reaction of Ag+ [Al(ORF )4 ]- and the transition metal carbonyls (TMCs) Re2 (CO)10 and Ir4 (CO)12 respectively. The solid-state structure of the AgRe4 cluster shows an unexpected asymmetric coordination motif, wherein the silver(I) cation has inserted into the Re-Re bond of one Re2 (CO)10 moiety, while the other dirhenium carbonyl coordinates only over one metal atom towards the silver(I) cation. The AgIr8 cluster is formed by the edge-on coordination of two Ir4 tetrahedra and the silver cation in a D2 symmetric fashion with a torsion angle of 46.5°. QTAIM analysis shows bond paths between the silver atom and the nearby metal atoms in all cases, whereas only the non-inserted Re2 (CO)10 moiety shows additional bond paths between the carbonyl ligands and the silver cation. In addition, the insertion of the Ag+ cation into the Re-Re bond in Re2 (CO)10 removes the bond path between the two rhenium atoms. The EDA-NOCV analysis suggests an increase of the interaction energy between the silver(I) cation and the respective metal carbonyls from the metal centered transition metal carbonyl (TMC) donors W(CO)6

The Dynamic Formation from Metal-Organic Frameworks of High-Density Platinum Single-Atom Catalysts with Metal-Metal Interactions.

Single-atom catalysts (SACs) hold great promise for highly efficient heterogeneous catalysis, yet the practical applications require the development of high-density active sites with flexible geometric structures. The lack of understanding in the dynamic formation process of single atoms in the host framework has been plaguing the controllable synthesis of next generation SACs. Here using Co-based metal-organic frameworks (MOFs) as a starting substrate, we fully elucidated the formation of high-density Pt single atoms with inter-site interactions in derived Co3 O4 host. The cation exchange process and dynamic evolution of Pt-Pt interactions, organic ligand cleavage and Pt-oxygen coordination formation during the pyrolysis process have been unambiguously interpreted by a series of in situ/ex situ spectroscopic measurements and theoretical computation. These findings would direct the synthesis of high-density SACs with metal-metal interactions, which demonstrate significantly enhanced structural flexibility and catalytic properties.

High-Strength Plus Reversible Supramolecular Adhesives Achieved by Regulating Intermolecular PtII ⋠⋠⋠PtII Interactions.

Surface adhesion has a great contradiction in high strength and good reversibility given their mutually exclusive requirements of fixed crosslinked networks and dynamic chain motion. Herein, we demonstrate a supramolecular organoplatinum(II) adhesive system regulated by intermolecular PtII ⋅⋅⋅PtII interactions that can simultaneously achieve high-strength and excellent reversible adhesion to various substrates. Upon alternating temperature, the assembly of suitably substituted organoplatinum(II) molecules can switch between well-ordered and disordered states via tuning PtII ⋅⋅⋅PtII interactions, resulting in stable reversible adhesion even after 100 cycles with a robust strength of ≈1.25 MPa and a large on-off ratio of ≈25. Along with the switch of PtII ⋅⋅⋅PtII contacts, the surface adhesion of organoplatinum(II) adhesives can be monitored by their changes in electrical signals. This study will open up new inspirations for developing high-performance reversible adhesives.

Trigonal Planar Au@Ag3 Clusters Showing Exceptionally Fast and Efficient Phosphorescence in Violet to Deep-Blue Region.

We report here a series of original ligand-supported trigonal planar Au@Ag3 clusters exhibiting bright solid-state phosphorescence in violet to deep-blue range (λmax =410-442 nm) with remarkably short decay times (0.36-1.36 µs) and up to 96 % emission quantum yield at 298 K.

H2 , B-H, and Si-H Bond Activation and Facile Protonolysis Driven by Pt-Base Metal Cooperation.

We report a series of heterobimetallic Pt/Zn and Pt/Ca complexes to study the effect of proximity of a dicationic base metal on the organometallic Pt species. Varying degrees of Pt⋅⋅⋅Zn and Zn interaction with the bridging Me group are achieved, showcasing snapshots of a hypothetical process of retrotransmetalation from Pt to Zn. In contrast, only weak interactions were observed for Ca with a Pt-bound Me group. Activation of H2 , B-H and Si-H bonds leads to the formation of hydride-bridged Pt-H-Zn complexes, which is not observed in the absence of Zn, pointing out the importance of metal-metal cooperation. Reactivity of PtMe2 /M2+ with terminal acetylene, water and methanol is also studied, leading to facile protonation of one of the Me groups at the Pt center only when Zn is present. This study sheds light on various ways in which the presence of a 2+ metal cation significantly affects the reactivity of a common organoplatinum complex.

Luminescence and Length Control in Nonchelated d8 -Metallosupramolecular Polymers through Metal-Metal Interactions.

Supramolecular polymers (SPs) of d8 transition metal complexes have received considerable attention by virtue of their rich photophysical properties arising from metal-metal interactions. However, thus far, the molecular design is restricted to complexes with chelating ligands due to their advantageous preorganization and strong ligand fields. Herein, we demonstrate unique pathway-controllable metal-metal-interactions and remarkable 3 MMLCT luminescence in SPs of a non-chelated PtII complex. Under kinetic control, self-complementary bisamide H-bonding motifs induce a rapid self-assembly into non-emissive H-type aggregates (1A). However, under thermodynamic conditions, a more efficient ligand coplanarization leads to superiorly stabilized SP 1B with extended Pt⋅⋅⋅Pt interactions and remarkably long 3 MMLCT luminescence (τ77 K =0.26 ms). The metal-metal interactions could be subsequently exploited to control the length of the emissive SPs using the seeded-growth approach.

Binding, Release and Functionalization of Intact Pnictogen Tetrahedra Coordinated to Dicopper Complexes.

The bridging MeCN ligand in the dicopper(I) complexes [(DPFN)Cu2 (µ,η1 : η1 -MeCN)][X]2 (X=weakly coordinating anion, NTf2 (1 a), FAl[OC6 F10 (C6 F5 )]3 (1 b), Al[OC(CF3 )3 ]4 (1 c)) was replaced by white phosphorus (P4 ) or yellow arsenic (As4 ) to yield [(DPFN)Cu2 (µ,η2 : η2 -E4 )][X]2 (E=P (2 a-c), As (3 a-c)). The molecular structures in the solid state reveal novel coordination modes for E4 tetrahedra bonded to coinage metal ions. Experimental data and quantum chemical computations provide information concerning perturbations to the bonding in coordinated E4 tetrahedra. Reactions with N-heterocyclic carbenes (NHCs) led to replacement of the E4 tetrahedra with release of P4 or As4 and formation of [(DPFN)Cu2 (µ,η1 : η1 -Me NHC)][X]2 (4 a,b) or to an opening of one E-E bond leading to an unusual E4 butterfly structural motif in [(DPFN)Cu2 (µ,η1 : η1 -E4 Dipp NHC)][X]2 (E=P (5 a,b), E=As (6)). With a cyclic alkyl amino carbene (Et CAAC), cleavage of two As-As bonds was observed to give two isomers of [(DPFN)Cu2 (µ,η2 : η2 -As4 Et CAAC)][X]2 (7 a,b) with an unusual As4 -triangle+1 unit.

A New Look at Molecular and Electronic Structure of Homoleptic Diiron(II,II) Complexes with N,N-Bidentate Ligands: Combined Experimental and Theoretical Study.

Paddlewheel-type binuclear complexes featuring metal-metal bonding have been the subject of widespread interest due to fundamental concern in their electronic structures and potential applications. Here, we explore the molecular and electronic structures of diiron(II,II) complexes with N,N'-diarylformamidinate ligands. While a paddlewheel-type diiron(II,II) complex with N,N'-diphenylformamidinate ligands (DPhF) exhibits the centrosymmetric [Fe2 (µ-DPhF)4 ] structure, a minor alteration in the ligand system, i. e., switching from phenyl to p-tolyl N-substituted formamidinate ligand (DTolF), resulted in the isolation of an unprecedented non-centrosymmetric [Fe(µ-DTolF)3 Fe(κ2 -DTolF)] complex. Both complexes were characterized using single-crystal X-ray diffraction, magnetic measurements, 57 Fe Mössbauer spectroscopy, and cyclic voltammetry along with high-level ab-initio calculations. The results provide a new view on a range of factors controlling the ground-state electronic configuration and structural diversity of homoleptic diiron(II,II) complexes. Model calculations determined that the Mayer bond orders for Fe-Fe interactions are significantly lower than 1 and equal to 0.15 and 0.28 for [Fe2 (µ-DPhF)4 ] and [Fe(µ-DTolF)3 Fe(κ2 -DTolF)], respectively.

A Bis-(carbone) Pincer Ligand and Its Coordinative Behavior toward Multi-Metallic Configurations.

Carbones are divalent carbon(0) species that contain two lone pairs of electrons. Herein, we have prepared the first known stable and isolable free bis-(carbone) pincer framework with a well-defined solid-state structure. This bis-(carbone) ligand is an effective scaffold for forming monometallic (Ni and Pd) and trinuclear heterometallic complexes with Au-Pd-Au, Au-Ni-Au, and Cu-Ni-Cu configurations. Sophisticated quantum-theoretical analyses found that the metal-metal interactions are too weak to play a significant role in upholding these multi-metallic configurations; rather, the four lone pairs of electrons within the bis-(carbone) framework are the main contributors to the stability of the complexes.

Coinage Metal Complexes of Bis(quinoline-2-ylmethyl)phenylphosphine-Simple Reactions Can Lead to Unprecedented Results.

The different coordination behavior of the flexible yet sterically demanding, hemilabile P,N ligand bis(quinoline-2-ylmethyl)phenylphosphine (bqmpp) towards selected CuI , AgI and AuI species is described. The resulting X-ray crystal structures reveal interesting coordination geometries. With [Cu(MeCN)4 ]BF4 , compound 1 [Cu2 (bqmpp)2 ](BF4 )2 is obtained, wherein the copper(I) atoms display a distorted square planar and square pyramidal geometry. The steric demand and π-stacking of the ligand allow for a short Cu⋅⋅⋅Cu distance (2.588(9) Å). CuI complex 2 [Cu4 Cl3 (bqmpp)2 ]BF4 contains a rarely observed Cu4 Cl3 cluster, probably enabled by dichloromethane as the chloride source. In the cluster, even shorter Cu⋅⋅⋅Cu distances (2.447(1) Å) are present. The reaction of Ag[SbF6 ] with the ligand leads to a dinuclear compound (3) in solution as confirmed by 31 P{1 H} NMR spectroscopy. During crystallization, instead of the expected phosphine complex 3, a tris(quinoline-2-ylmethyl)bisphenyl-phosphine (tqmbp) compound [Ag2 (tqmbp)2 ](SbF6 )2 4 is formed by elimination of quinaldine. The Au(I) compound [Au2 (bqmpp)2 ]PF6 (5) is prepared as expected and shows a linear arrangement of two phosphine ligands around AuI .

Self-Assembly of Molecular Trefoil Knots Featuring Pentadecanuclear Homoleptic AuI -, AuI /AgI -, or AuI /CuI -Alkynyl Coordination.

Metal-free and metal-containing molecular trefoil knots are fascinating ensembles that are usually covalently assembled, the latter requiring the rational design of di- or multidentate/multipodal ligands as connectors. In this work, we describe the self-assembly of pentadecanuclear AuI trefoil knots [Au15 (C≡CR)15 ] from monoalkynes HC≡CR (R=9,9-X2 -fluorenyl with X=nBu, n-hexyl) and [AuI (THT)Cl]. Hetero-bimetallic counterparts [Au9 M6 (C≡CR)15 ] (M=Cu/Ag) were self-assembled by reactions of [Au15 (C≡CR)15 ] with [Cu(MeCN)4 ]+ /AgNO3 and HC≡CR. The type of pentadecanuclear trefoil knots described herein is characterized by X-ray crystallography, 2D NMR and HR-ESI-MS. [Au9 Cu6 (C≡CR)15 ] is relatively stable in hexane; its excited state properties were investigated. DFT calculations revealed that non-covalent metal-metal and metal-ligand interactions, together with longer alkyl chain-strengthened inter-ligand dispersion interactions, govern the stability of the trefoil knot structures.

Bimetallic Copper/Ruthenium/Osmium Complexes: Observation of Conformational Differences Between the Solution Phase and Solid State by Atomic Pair Distribution Function Analysis.

High-energy X-ray scattering and pair distribution function analysis (HEXS/PDF) is a powerful method to reveal the structure of materials lacking long-range order, but is underutilized for molecular complexes in solution. We demonstrate the application of HEXS/PDF with 0.26 Šresolution to uncover the solution structure of five bimetallic CuI /RuII /OsII complexes. HEXS/PDF of each complex in acetonitrile solution confirms the pairwise distances in the local coordination sphere of each metal center as well as the metal⋅⋅⋅metal distances separated by over 12 Å. The metal⋅⋅⋅metal distance detected in solution is compared with that from the crystal structure and molecular models to confirm that distortions to the metal bridging ligand are unique to the solid state. This work presents the first example of observing sub-Ångström conformational differences by direct comparison of solution phase and solid-state structures and shows the potential for HEXS/PDF in the determination of solution structure of single molecules.

Efficient Long-Range Triplet Exciton Transport by Metal-Metal Interaction at Room Temperature.

Efficient and long-range exciton transport is critical for photosynthesis and opto-electronic devices, and for triplet-harvesting materials, triplet exciton diffusion length ( L D ) and coefficient ( D ) are key parameters in determining their performances. Herein, we observed that PtII and PdII organometallic nanowires exhibit long-range anisotropic triplet exciton LD of 5-7 µm along the M-M direction using direct photoluminescence (PL) imaging technique by low-power continuous wave (CW) laser excitation. At room temperature, via a combined triplet-triplet annihilation (TTA) analysis and spatial PL imaging, an efficient triplet exciton diffusion was observed for the PtII and PdII nanowires with extended close M-M contact, while is absent in nanowires without close M-M contact. Two-dimensional electronic spectroscopy (2DES) and calculations revealed a significant contribution of the delocalized 1/3 [dσ*(M-M)→π*] excited state during the exciton diffusion modulated by the M-M distance.