Amino acids as stabilizers for lysozyme during the spray-drying process and storage.

Amino acids (AAs) have been used as excipients in protein formulations both in solid and liquid state products due to their stabilizing effect. However, the mechanisms by which they can stabilize a protein have not been fully elucidated yet. The purpose of this study was to investigate the effect of AAs with distinct physicochemical properties on the stability of a model protein (lysozyme, LZM) during the spray-drying process and subsequent storage. Molecular descriptor based multivariate data analysis was used to select distinct AAs from the group of 20 natural AAs. Then, LZM and the five selected AAs (1:1 wt ratio) were spray-dried (SD). The solid form, residual moisture content (RMC), hygroscopicity, morphology, secondary/tertiary structure and enzymatic activity of LZM were evaluated before and after storage under 40 °C/75 % RH for 30 days. Arginine (Arg), leucine (Leu), glycine (Gly), tryptophan (Trp), aspartic acid (Asp) were selected because of their distinct properties by using principal component analysis (PCA). The SD LZM powders containing Arg, Trp, or Asp were amorphous, while SD LZM powders containing Leu or Gly were crystalline. Recrystallization of Arg, Trp, Asp and polymorph transition of Gly were observed after the storage under accelerated conditions. The morphologies of the SD particles vary upon the different AAs formulated with LZM, implying different drying kinetics of the five model systems. A tertiary structural change of LZM was observed in the SD powder containing Arg, while a decrease in the enzymatic activity of LZM was observed in the powders containing Arg or Asp after the storage. This can be attributed to the extremely basic and acidic conditions that Arg and Asp create, respectively. This study suggests that when AAs are used as stabilizers instead of traditional disaccharides, not only do classic vitrification theory and water replacement theory play a role, but the microenvironmental pH conditions created by basic or acidic AAs in the starting solution or during the storage of solid matter are also crucial for the stability of SD protein products.

Integrative Salt Selection and Formulation Optimization: Perspectives of Disproportionation and Microenvironmental pH Modulation.

We report a novel utilization of a pH modifier as a disproportionation retardant in a tablet formulation. The drug molecule of interest has significant bioavailability challenges that require solubility enhancement. In addition to limited salt/cocrystal options, disproportionation of the potential salt(s) was identified as a substantial risk. Using a combination of Raman spectroscopy with chemometrics and quantitative X-ray diffraction in specially designed stress testing, we investigated the disproportionation phenomena. The learnings and insight drawn from crystallography drove the selection of the maleate form as the target API. Inspired by the fumarate form's unique stability and solubility characteristics, we used fumaric acid as the microenvironmental pH modulator. Proof-of-concept experiments with high-risk (HCl) and moderate-risk (maleate) scenarios confirmed the synergistic advantage of fumaric acid, which interacts with the freebase released by disproportionation to form a more soluble species. The resultant hemifumarate helps maintain the solubility at an elevated level. This work demonstrates an innovative technique to mediate the solubility drop during the "parachute" phase of drug absorption using compendial excipients, and this approach can potentially serve as an effective risk-mitigating strategy for salt disproportionation.

Study on Sulfamethoxazole-Piperazine Salt: A Mechanistic Insight into Simultaneous Improvement of Physicochemical Properties.

Multidrug salts represent more than one drug in a crystal lattice and thus could be used to deliver multiple drugs in a single dose. It showcases unique physicochemical properties in comparison to individual components, which could lead to improved efficacy and therapeutic synergism. This study presents the preparation and scale-up of sulfamethoxazole-piperazine salt, which has been thoroughly characterized by X-ray diffraction and thermal and spectroscopic analyses. A detailed mechanistic study investigates the impact of piperazine on the microenvironmental pH of the salt and its effect on the speciation profile, solubility, dissolution, and diffusion profile. Also, the improvement in the physicochemical properties of sulfamethoxazole due to the formation of salt was explored with lattice energy contributions. A greater ionization of sulfamethoxazole (due to pH changes contributed by piperazine) and lesser lattice energy of sulfamethoxazole-piperazine contributed to improved solubility, dissolution, and permeability. Moreover, the prepared salt addresses the stability issues of piperazine and exhibits good stability behavior under accelerated stability conditions. Due to the improvement of physicochemical properties, the sulfamethoxazole-piperazine salt demonstrates better pharmacokinetic parameters in comparison to sulfamethoxazole and provides a strong suggestion for the reduction of dose. The following study suggests that multidrug salts can concurrently enhance the physicochemical properties of drugs and present themselves as improved fixed-dose combinations.

Design and Optimization of a Nanoparticulate Pore Former as a Multifunctional Coating Excipient for pH Transition-Independent Controlled Release of Weakly Basic Drugs for Oral Drug Delivery.

Bioavailability of weakly basic drugs may be disrupted by dramatic pH changes or unexpected pH alterations in the gastrointestinal tract. Conventional organic acids or enteric coating polymers cannot address this problem adequately because they leach out or dissolve prematurely, especially during controlled release applications. Thus, a non-leachable, multifunctional terpolymer nanoparticle (TPN) made of cross-linked poly(methacrylic acid) (PMAA)-polysorbate 80-grafted-starch (PMAA-PS 80-g-St) was proposed to provide pH transition-independent release of a weakly basic drug, verapamil HCl (VER), by a rationally designed bilayer-coated controlled release bead formulation. The pH-responsive PMAA and cross-linker content in the TPN was first optimized to achieve the largest possible increase in medium uptake alongside the smallest decrease in drug release rate at pH 6.8, relative to pH 1.2. Such TPNs maintained an acidic microenvironmental pH (pHm) when loaded in ethylcellulose (EC) films, as measured using pH-indicating dyes. Further studies of formulations revealed that with the 1:2 VER:TPN ratio and 19% coating weight gain, bilayer-coated beads maintained a constant release rate over the pH transition and exhibited extended release up to 18 h. These results demonstrated that the multifunctional TPN as a pHm modifier and pH-dependent pore former could overcome the severe pH-dependent solubility of weakly basic drugs.

Microenvironmental pH Modification in Buccal/Sublingual Dosage Forms for Systemic Drug Delivery.

Many drug candidates are poorly water-soluble. Microenvironmental pH (pHM) modification in buccal/sublingual dosage forms has attracted increasing interest as a promising pharmaceutical strategy to enhance the oral mucosal absorption of drugs with pH-dependent solubility. Optimizing drug absorption at the oral mucosa using pHM modification is considered to be a compromise between drug solubility and drug lipophilicity (Log D)/permeation. To create a desired pHM around formulations during the dissolution process, a suitable amount of pH modifiers should be added in the formulations, and the appropriate methods of pHM measurement are required. Despite pHM modification having been demonstrated to be effective in enhancing the oral mucosal absorption of drugs, some potential risks, such as oral mucosal irritation and teeth erosion caused by the pH modifiers, should not been neglected during the formulation design process. This review aims to provide a short introduction to the pHM modification concept in buccal/sublingual dosage forms, the properties of saliva related to pHM modification, as well as suitable drug candidates and pH modifiers for pHM modifying buccal/sublingual formulations. Additionally, the methods of pHM measurement, pHM modification methods and the corresponding challenges are summarized in the present review.

Hydroxypropyl methyl cellulose derivatives stabilize fragment antibody against aggregation in spray dried formulations at elevated temperature and resist pH changes.

The ability to deliver stable and active dried protein therapeutics from biopharmaceutical drug delivery systems is critical for solid dosage formulation development. Spray dried formulations with carefully selected excipients provide a unique opportunity in amorphous phase stabilization of the therapeutic proteins. Herein, we discuss the role of hydroxypropyl methylcellulose acetate succinate (HPMCAS) derivatives as polymeric excipients for stabilizing a model fragment antibody (Fab2) during high temperature processing and in possible low pH environments of a drug delivery platform. The effects of high temperature processing and microenvironmental pH sensitivity are of particular interest to us due to their adverse impact on stability of molecules that demonstrate temperature and pH dependent inactivation within drug delivery devices. It appears in solid state at 90 °C and 37 °C and within low pH micro-environment HPMCAS protects protein against aggregation. The high temperature performance of HPMCAS is comparable to that of a disaccharide excipient like trehalose in spray dried protein powder. Simultaneously, inside a poly(lactic-co-glycolic acid) (PLGA) based delivery system HPMCAS provides protection to a pH sensitive protein against acidic degradation products from aqueous hydrolysis of PLGA.

Dissolution of a Biopharmaceutics Classification System Class II Free Acid from Immediate Release Tablets Containing a Microenvironmental pH Modulator: Comparison of a Biorelevant Bicarbonate Buffering System with Phosphate Buffers.

Poor water dissolution of active pharmaceutical ingredients (API) limits the rate of absorption from the gastrointestinal tract. Increasing the pH of a solid form microenvironment can enhance the dissolution of weakly acidic drugs, but data on this phenomenon in a physiologically relevant bicarbonate media are lacking. In this paper, we examined the effect of a microenvironmental pH modulator (Na2HPO4) on the dissolution of a Biopharmaceutics Classification System (BCS) class II free weak acid (ibuprofen) at biorelevant conditions, including an automatic bicarbonate buffering system, as well as in compendial (50 mM) and low-concentration (10 mM) phosphate buffers with no external pH control. The tablets of 200 mg ibuprofen with either Na2HPO4 (phosphate formulation, PF) or NaCl (reference formulation, RF) were manufactured using a compression method. In a pH 2 simulated gastric fluid, only PF produced a transient supersaturation of ibuprofen, dissolving a fourfold higher drug amount than RF. In a bicarbonate-buffered simulated intestinal fluid with a dynamically controlled pH (5.7, 7.2, and 5.8 to 7.7 gradient), PF dissolved more drug within 30 min than RF (p ≤ 0.019). Of note, the use of a 50 mM phosphate buffer pH 7.2 provided opposite results-RF dissolved the API much faster than PF. Moreover, 10 mM phosphate buffers of pH 5.6 and 7.2 could neither maintain a constant pH nor mimic the bicarbonate buffer performance. In conclusion, the use of a bicarbonate-buffered intestinal fluid, instead of phosphate buffers, may be essential in dissolution tests of BCS class II drugs combined with pH modulators.

Level A IVIVC for immediate release tablets confirms in vivo predictive dissolution testing for ibuprofen.

A bioequivalence study comparing two fixed dose combination tablets containing 200 mg ibuprofen and 30 mg pseudoephedrine hydrochloride showed bioequivalence for pseudoephedrine AUC and Cmax, but the reference product showed higher Cmax than the test product in fasted conditions. The main difference between products was the presence of tribasic calcium phosphate in the reference tablet, resulting in an increased surface pH of the dissolving ibuprofen particles under gastric and intestinal conditions and, consequently, higher solubility of ibuprofen. A mechanistic model based on mass balance and ionization equilibria was used to calculate the pH of the particle surface under different buffer conditions. The discrepancies in surface pH between test and reference tablet were pronounced in 0.1 M and 0.01 M hydrochloric acid and in diluted maleate 7 mM pH 6.5 and phosphate 5 mM pH 6.7 buffers (but negligible in compendial phosphate buffer pH 6.8. Only those dissolution tests using pre-treatment in acidic conditions could be used to build a one-step in vitro-in vivo correlation (IVIVC). This work shows the potential of these discriminatory and in vivo predictive dissolution methods to obtain IVIVCs for BCS class IIa drugs and for extending BCS biowaivers to BCS class IIa drugs.

Role of polymers in the physical and chemical stability of amorphous solid dispersion: A case study of carbamazepine.

Incorporating the amorphous drug in polymeric components has been demonstrated as a feasible approach to enhance the bioavailability of poorly water-soluble drugs. The objective of this study was to investigate the role of polymers in the stability of amorphous solid dispersion (ASD) by evaluating the drug-polymer interaction, microenvironmental pH, and stability of ASD. Carbamazepine (CBZ), a Biopharmaceutics Classification System Class II compound, was utilized as a model drug. Polyvinylpyrrolidone (PVP), poly(1-vinylpyrrolidone-co-vinyl acetate) (PVPVA), polyacrylic acid (PAA), and hydroxypropyl methylcellulose (HPMCAS) were selected as model polymers. CBZ ASDs were characterized by X-ray diffractometry (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, and dissolution studies. Molecular modeling was conducted to understand the strength of interaction between CBZ and each polymer. FTIR spectroscopy and molecular modeling results show that the interaction between CBZ and PAA is the strongest among all the ASDs, as PAA is an acidic polymer with the potential to form strong hydrogen bonding with CBZ. Besides, hydrophobic interaction is detected between CBZ and HPMCAS. CBZ-PAA and CBZ-HPMCAS ASDs reveal better physical stability than CBZ-PVP and CBZ-PVPVA ASDs under 40 °C/75% RH for 8 weeks. However, CBZ-PAA ASD shows chemical degradation after stability testing due to its acidic microenvironmental pH. This paper shows that strong intermolecular interactions between CBZ and polymers contribute to the physical stability of the ASDs. Additionally, acidic polymers yield an acidic microenvironment pH of the ASDs that causes chemical degradation during storage. Hence, a balance between the ability of a given polymer to promote physical stability and chemical stability may need to be considered.

Multi-material 3D printing of programmable and stretchable oromucosal patches for delivery of saquinavir.

Oromucosal patches for drug delivery allow fast onset of action and ability to circumvent hepatic first pass metabolism of drugs. While conventional fabrication methods such as solvent casting or hot melt extrusion are ideal for scalable production of low-cost delivery patches, these methods chiefly allow for simple, homogenous patch designs. As alternative, a multi-material direct-ink-write 3D printing for rapid fabrication of complex oromucosal patches with unique design features was demonstrated in the present study. Specifically, three print-materials: an acidic saquinavir-loaded hydroxypropyl methylcellulose ink, an alkaline effervescent sodium carbonate-loaded ink, and a methyl cellulose backing material were combined in various designs. The CO2 content and pH of the microenvironment were controlled by adjusting the number of alkaline layers in the patch. Additionally, the rigid and brittle patches were converted to compliant and stretchable patches by implementing mesh-like designs. Our results illustrate how 3D printing can be used for rapid design and fabrication of multifunctional or customized oromucosal patches with tailored dosages and changed drug permeation.

An in vitro gel-based system for characterizing and predicting the long-term performance of PLGA in situ forming implants.

In situ forming implants are exposed to an extracellular matrix resembling a gel rather than aqueous solution upon subcutaneous administration. The aim of study was to develop a gel-based release testing system for characterizing the long-term in vitro behavior of in situ forming implants. The gel-based system consisted of an agarose gel mimicking the subcutaneous injection site and a receiver layer comprising phosphate buffer. Poly(D,L-lactide-co-glycolide) in situ forming implants containing leuprolide acetate as the model peptide and N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide (DMSO) or triacetin as co-solvent were investigated. The gel-based release testing system discriminated between the formulations. Accelerated release data obtained at elevated temperatures were able to predict real-time release applying the Arrhenius equation. Monitoring of the microenvironmental pH of the implants was performed by UV-Vis imaging in the gel-based system at 50 °C. A pH drop (from pH 7.4 to 6.7 for the NMP and DMSO implants, to pH 5.5 for the triacetin implants) within the first day was observed, followed by an increase to pH âˆ¼7.4. The gel-based system coupled with UV imaging offered opportunity for detailed evaluation and prediction of the in vitro performance of long-acting injectables, facilitating future development of in situ depot forming delivery systems.

Effect of pH Modifiers on the Solubility, Dissolution Rate, and Stability of Telmisartan Solid Dispersions Produced by Hot-melt Extrusion Technology.

The aim of the current study was to investigate the dual effect of an amorphous solid dispersion generated by hot melt extrusion and the addition of pH modifiers on the solubility and stability of telmisartan. Hydroxypropyl methylcellulose acetate succinate L grade was used as a polymeric carrier and recrystallization inhibitor, and meglumine, sodium carbonate, or Neusilin S2 were incorporated as pH modifiers to generate a desirable microenvironmental pH in the solid dispersions. Differential scanning calorimetry, powder X-ray diffraction, and Fourier transform infrared spectroscopy were incorporated to obtain the solid-state characterizations of telmisartan, and the results confirm a partial transformation of telmisartan to an amorphous state. An in vitro release study revealed that the transformation of telmisartan to an amorphous material improved its dissolution rate by 2-fold compared to pure drug and by up to 5-fold with the incorporation of pH modifiers. Results of the stability studies demonstrated that the samples have no significant degradation under accelerated stability conditions at 40 °C/75% RH.

Multicomponent crystalline solid forms of aripiprazole produced via hot melt extrusion techniques: An exploratory study.

Multicomponent crystalline solid forms (salts, cocrystals and eutectics) are a promising means of enhancing the dissolution behavior of poorly soluble drugs. The present study demonstrates the development of multicomponent solid forms of aripiprazole (ARP) prepared with succinic acid (SA) and nicotinamide (NA) as coformers using the hot melt extrusion (HME) technique. The HME-processed samples were characterized and analyzed using differential scanning calorimetry (DSC), hot stage microscopy (HSM), Fourier transform infrared (FTIR) spectroscopy, powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM). The DSC and HSM analyses revealed a characteristic single melting temperature in the solid forms, which differed from the melting points of the individual components. The discernible changes in the FTIR (amide C=O stretching) and PXRD results for ARP-SA confirm the formation of new crystalline solid forms. In the case of ARP-NA, these changes were less prominent, without the appearance or disappearance of peaks, suggesting no change in the crystal lattice. The SEM images demonstrated morphological differences between the HME-processed samples and the individual parent components. The in vitro dissolution and microenvironment pH measurement studies revealed that ARP-SA showed a higher dissolution rate, which could be due to the acidic microenvironment pH imparted by the coformer. The observations of the present study demonstrate the applicability of the HME technique for the development of ARP multicomponent solid forms.

Exploration of in vitro drug release testing methods for saquinavir microenvironmental pH modifying buccal films.

Buccal films containing a pH modifying excipient may be able to increase bioavailability of drugs with pH-dependent solubility such as saquinavir. Access to suitable in vitro drug release testing methods may facilitate buccal formulation development. This study aimed to explore two release testing methods for characterising buccal films and to elucidate the relationship between microenvironmental pH (pHM, i.e. the pH around the swelling films) and saquinavir release. The Franz diffusion cell method was applicable to investigate the effect of hydroxypropyl methylcellulose (HPMC) grade on saquinavir release. Films containing HPMC K3 LV had a faster saquinavir release than films containing HPMC K100 LV. A UV/Vis imaging method was developed to visualise saquinavir release and pHM changes during the initial dissolution. Within 5 min, the pHM decreased from 6.8 to around 5.4 for HPMC K100 LV-based films containing 11.1 % or 16.6 % (w/w) malic acid. Subsequently, the pHM increased due to increasing concentrations of saquinavir. An increase in malic acid content led to a faster saquinavir release. The combination of methods may be broadly applicable for excipient screening in development of buccal formulations. The imaging approach holds promise for characterizing other pH modifying formulation principles.

Design and Optimization of a Novel Strategy for the Local Treatment of Helicobacter pylori Infections.

Infections with Helicobacter pylori are a global challenge. Currently, H. pylori infections are treated systemically, but the eradication rates of the different therapy regimens are declining due to the growing number of bacterial strains resistant to major antibiotics. Here, we present a strategy for the local eradication of H. pylori by the use of Penicillin G sodium (PGS). In vitro experiments revealed that PGS shows high antibiotic activity against resistant strains of Helicobacter pylori with a minimum inhibitory concentration (MIC) of 0.125 µg/ml. In order to provide luminal concentrations above the MIC for longer periods of time, an extended release tablet was developed. Alkalizers were included to prevent acidic degradation of PGS within the tablet matrix. Out of the tested alkalizers MgO, l-Lysine, NaHCO3, and Na2CO3 NaHCO3 provided the strongest rise in pH inside the hydrated matrix when tested in simulated gastric fluid. Better PGS stability can mainly reasoned from that, addition of MgO resulted in high pH values within the matrix, causing basic degradation of PGS. This work is a first step towards the use of extended release tablets containing PGS for the local treatment of H. pylori as a safe and cost-effective alternative to common systemic treatment regimens.

Increased Tumoral Microenvironmental pH Improves Cytotoxic Effect of Pharmacologic Ascorbic Acid in Castration-Resistant Prostate Cancer Cells.

BACKGROUND: The anticancer potential of pharmacologic ascorbic acid (AA) has been detected in a number of cancer cells. However, in vivo study suggested a strongly reduced cytotoxic activity of AA. It was known that pH could be a critical influencing factor for multiple anticancer treatments. In this study, we explored the influence of pH on the cytotoxicity of ascorbic acid. We employed castration-resistant prostate cancer (CRPC) cell lines PC3 and DU145 to observe the therapeutic effect of AA on PCa cells that were cultured with different pH in vitro. We also analyzed the influence of pH and extracellular oxidation on cytotoxicity of AA in cancer cells using reactive oxygen species (ROS) assay, cellular uptake of AA, and NADPH assay. Male BALB/c nude mice bearing prostate carcinoma xenografts (PC3 or DU145) were used to assess treatment response to AA with or without bicarbonate in vivo. The cellular uptake of AA in PCa xenografts was detected using positron emission tomography (PET). Small animal PET/CT scans were performed on mice after the administration of 6-deoxy-6-[18F] fluoro-L-ascorbic acid (18F-DFA). RESULTS: Our in vitro studies demonstrate that acidic pH attenuates the cytotoxic activity of pharmacologic ascorbic acid by inhibiting AA uptake in PCa cells. Additionally, we found that the cancer cell-selective toxicity of AA depends on ROS. In vivo, combination of AA and bicarbonate could provide a significant better therapeutic outcome in comparison with controls or AA single treated mice. 18F-DFA PET imaging illustrated that the treatment with NaHCO3 could significantly increase the AA uptake in tumor. CONCLUSIONS: The alkalinity of tumor microenvironment plays an important role in anticancer efficiency of AA in CRPC. 18F-DFA PET/CT imaging could predict the therapeutic response of PCa animal model through illustration of tumoral uptake of AA. 18F-DFA might be a potential PET tracer in clinical diagnosis and treatment for CRPC.

Enhanced pharmacokinetic performance of dapoxetine hydrochloride via the formulation of instantly-dissolving buccal films with acidic pH modifier and hydrophilic cyclodextrin: Factorial analysis, in vitro and in vivo assessment.

Instantly dissolving buccal films have gained attention owing to their easy administration and capability to surmount the hepatic first pass effect of drugs. Dapoxetine hydrochloride (DPX) has a low oral bioavailability due to significant hepatic first pass metabolism. In addition, DPX is a weakly basic drug with a pH dependent solubility that could limit its dissolution in the body neutral fluids. In order to surpass these challenges, this work aimed at enhancing DPX bioavailability via the formulation of instantly dissolving buccal films comprising a pH modifier and a hydrophilic cyclodextrin. Tartaric acid and hydroxypropyl beta-cyclodextrin were selected as dual solubilizing agents based on the screening study. 32 factorial design was employed for the formulation and optimization of DPX films. Statistical analysis revealed that hydroxypropyl methyl cellulose E5: maltodextrin ratio and propylene glycol concentrations have significant effects on mechanical properties, percent DPX dissolved after 5 min, and in vivo mouth dissolving time at P  < 0.05. The optimized film [HPMC E5: MDX, 1:1 and 1% PG] showed no significant change of properties or drug dissolution upon storage at 40 °C/75% RH for a period of 3 months. In addition, the optimized film showed significantly enhanced absorption relative to the oral reference tablet. Therefore, the optimized film could be considered a promising delivery system for DPX with expected improved patient compliance and enhanced pharmacokinetic performance.

Liquid Degradable Poly(trimethylene-carbonate-co-5-hydroxy-trimethylene carbonate): An Injectable Drug Delivery Vehicle for Acid-Sensitive Drugs.

Liquid, injectable hydrophobic polymers have advantages as degradable drug delivery vehicles; however, polymers examined for this purpose to date form acidic degradation products that may damage acid-sensitive drugs. Herein, we report on a new viscous liquid vehicle, poly(trimethylene carbonate-co-5-hydroxy-trimethylene carbonate), which degrades through intramolecular cyclization producing glycerol, carbon dioxide, and water-soluble trimethylene carbonate. Copolymer degradation durations from weeks to months were achieved with the 5-hydroxy-trimethylene carbonate (HTMC) content of the oligomer having the greatest impact on the degradation rate, with oligomers possessing a higher HTMC content degrading fastest. The degradation products were non-cytotoxic towards 3T3 fibroblasts and RAW 264.7 macrophages. These copolymers can be injected manually through standard gauge needles and, importantly, during in vitro degradation, the microenvironmental pH within the oligomers remained near neutral. Complete and sustained release of the acid-sensitive protein vascular endothelial growth factor was achieved, with the protein remaining highly bioactive throughout the release period. These copolymers represent a promising formulation for local and sustained release of acid sensitive drugs.

Role of Structure, Microenvironmental pH, and Speciation To Understand the Formation and Properties of Febuxostat Eutectics.

Cocrystallization studies were undertaken to improve the solubility of a highly water-insoluble drug, febuxostat (FXT), used in the treatment of gout and hyperuricemia. A liquid-assisted grinding (LAG) method was successfully employed, starting with the screening of various coformers for obtaining cocrystals. However, in this process, three eutectic systems with coformers (probenecid, adipic acid, and α-ketoglutaric acid) were formed. Affinities of the different functional groups to form a hydrogen bond and ΔpKa differences, leading to the eutectic formation, were discussed. The eutectic systems thus formed were further characterized and analyzed using a differential scanning calorimeter (DSC) and powder X-ray diffraction (PXRD). Binary thermal phase diagrams were plotted using different ratios of the systems to confirm the formation of eutectics, and pH-dependent solubility studies exhibited a significant decrease in the solubility in comparison to that of the drug for all three eutectic systems. The solubility of FXT reduced from 46.53 µg/mL (pH 5.63) to 46.03 µg/mL, 28.53 µg/mL, and 18.88 µg/mL; 770.58 µg/mL (pH 8.21) to 307.574 µg/mL, 116.63 µg/mL, 113.40 µg/mL; and from 13165.97 µg/mL (pH 10.13) to 1409.737 µg/mL, 854.51 µg/mL, and 1218.99 µg/mL for FXT-probenecid, FXT-adipic acid, and FXT-α-ketoglutaric acid eutectic systems, respectively. Furthermore, the microenvironmental pH studies were carried out to understand the effect of the microenvironment on the solubility of these eutectic systems. The contribution to solubility from lattice and nonlattice forces considering the microenvironment was also discussed.

Application of ammonium bicarbonate buffer as a smart microenvironmental pH regulator of immobilized cephalosporin C acylase catalysis in different reactors.

In a stirred tank reactor, during catalysis with immobilized cephalosporin C acylase (CCA), the microenvironmental pH dropped to 7.2 in a nonbuffered system (with the pH maintained at 8.5 by adding alkali) due to the existence of diffusional resistance. Moreover, the immobilized CCA only catalyzed five batch reactions, suggesting that the sharp pH gradient impaired the enzyme stability. To buffer the protons produced in the hydrolysis of cephalosporin C by CCA, phosphate and bicarbonate buffers were introduced. When CCA was catalyzed with 0.1 M ammonium bicarbonate buffer, no obvious gradient between the bulk solution and intraparticle pH was detected, and the catalysis of 15 batch reactions was achieved. Accordingly, with 0.2 M ammonium bicarbonate buffer in a packed bed reactor, the immobilized CCA exhibited continuous catalysis with high conversion rates (≥95%) for 21 days. Reactions with ammonium bicarbonate buffer showed significant increases in the stability and catalytic efficiency of the immobilized CCA in different reactors compared to those in nonbuffered systems.