Temperature Changes in the Pulp Chamber During Orthodontic Bonding Using a High-Power Light-Emitting Diode Device With Two Different Exposure Times and Intensities: An In-Vitro Study.

OBJECTIVE: This study used a high-power light-emitting diode (LED) device to evaluate the effects of two exposure times and intensities on pulp chamber temperature and cooling time during bracket bonding. MATERIALS AND METHODS: Sixty upper premolars were used in the sample in this study. These premolars were split into two main groups based on the exposure time and intensity: the first group employed a traditional curing mode (TCG) for 20 seconds with an intensity of 1200 mw/cm2, whereas the second group had a quick curing mode (QCG) for 3 seconds with an intensity of 2500 mw/cm2. The pulp chamber's temperature variations and cooling times were recorded using a thermal imaging camera. The Mann-Whitney U test was used to find differences between the two-group comparison of the pulp chamber's temperature and cooling time. RESULTS: The two groups had statistically significant differences regarding the temperature increase in the pulp chamber and cooling time (p > 0.001). The mean temperature increase in the traditional curing group was 3.52°C, which is greater than that in the quick curing group (i.e., a mean value of 1.28°C). The mean cooling time in the traditional curing group was 38.83 seconds, which is greater than that in the quick curing group (9.97 seconds). CONCLUSIONS: Reducing the exposure time to 3 seconds and increasing the intensity to 2500 mw/cm2 is considered safer for the pulp chamber during and after the curing process.

Cone-Beam Computed Tomography for the Evaluation of Dental Pulp Chamber Volume: Implications for Clinics and Teaching.

The dental pulp chamber volume is a fundamental measurement in the field of endodontics, but also in forensic sciences, teaching and training, or tissue engineering. This study evaluates the precision of cone-beam computed tomography (CBCT) in comparison with computed micro-tomography (micro-CT) in evaluating the pulp chamber volume of the upper central incisors ex vivo. The intra-operator and inter-operator errors were evaluated, and the results for the two techniques were compared with those of a T-test for paired samples. The intra-operator and inter-operator errors were >0.05, indicating adequate reproducibility in each operator and no significant differences between their measurements. On the other hand, no significant differences between the two measurement techniques were found. The present results demonstrate that CBCT is a precise, feasible, and reproducible technique for the evaluation of the dental pulp chamber volume ex vivo. The results provided with this method are useful for different medical domains but also for the teaching and training of undergraduate and postgraduate students. Furthermore, the findings of this study carry significant clinical implications, as the accurate assessment of the pulp chamber volume is critical in the diagnosis and treatment of various endodontic conditions. The ability of CBCT to provide reliable 3D dental anatomy measurements can enhance the planning of endodontic treatments by allowing for a better understanding of the internal tooth morphology. Additionally, the precision and reproducibility of CBCT in assessing the pulp chamber volume can contribute to improved clinical outcomes and reduced complications during endodontic procedures. These findings further support the increasingly vital role of CBCT in modern clinical practice and underscore its value as an indispensable tool in the field of dentistry.

Internal and external morphological analysis of fused-rooted mandibular second molars in the Chinese population: A micro-computed tomographic study.

This study investigated the root canal morphology of fused-rooted mandibular second molars based on the pulp chamber floor (PCF) and analysed the correlation between the external morphology of the radicular groove, and the internal morphology of the PCF and root canal configuration. A total of 291 fused-rooted teeth collected from the Chinese population were scanned using micro-computed tomography and a dental operating microscope was used for observing the PCFs. The classification of the PCF and root canal configuration were identified according to modified Min et al.'s and Gao et al.'s classifications, respectively. Additionally, a new radicular groove classification was proposed. The correlation among these morphological characteristics was investigated using the chi-square test and Fisher's exact test (p < 0.05). The results showed that 74.2% of teeth had C-shaped PCFs, while 21.0% had non-C-shaped PCFs. As for the root canal configurations, 37.5% of teeth were merging type, 40.9% were symmetrical type, and 14.8% were asymmetrical type. Statistical analysis revealed a significant correlation between the PCF types and the root canal configurations (p < 0.001). The dominant root canal types for teeth with C-shaped PCFs were merging and symmetrical types, while the asymmetrical type was not identified in non-C-shaped PCFs. In addition, significant morphological association between the root canals and radicular grooves was also revealed (p < 0.001). Teeth with different PCF morphologies exhibit specific patterns of root canal category distribution. Understanding the morphological nuances of the root canal based on the PCF can assist clinicians in predicting and identifying the canal configuration beneath the visible orifice.

Impact of Calcium-Hydroxide, Sodium Ascorbate, and Sodium Thiosulphate on Bond Strength of Composite Restorations to Bleached Dentin.

This study evaluated the impact of using calcium-hydroxide or the antioxidant agents on the bond strength of adhesive restorations to bleached dentin. Forty teeth were prepared and allocated into 8 groups according to the surface treatment after bleaching (application or not of calcium hydroxide, 10% sodium ascorbate and 5% sodium thiosulphate for 10min), and the time of final restoration (immediate or after 7-days). Sodium perborate with 20% hydrogen peroxide was applied for 3 weeks using a developed artificial pulp chamber, with replacement every week. Composite resin restoration was performed and microtensile test was performed. Then, specimens were analyzed using a stereomicroscope and SEM. Data was submitted to Kruskal-Wallis and Dunn tests (p<0.05). The bond strength of non-bleached teeth was similar to the groups restored after 7 days of bleaching (p<0.05). The lowest values of bond strength were showed by groups restored immediately after bleaching (p<0.05). In all groups, there was a considerable predominance of adhesive fractures. Delaying the final restoration of teeth submitted to nonvital bleaching for 7 days permits an increase in bond strength. The immediate restoration of bleached teeth after the use of 10% sodium ascorbate or 5% sodium thiosulfate for 10 minutes showed unsatisfactory results. Clinical relevance Irrespective of the dentin protocol applied before adhesion, a satisfactory and an unsatisfactory result of bond strength values will be obtained delaying the final restoration or immediately performing the final restoration, respectively. Therefore, after nonvital tooth bleaching, clinicians should always delay the final restoration for a minimum period of 7 days.

Implications of root, pulp chamber, and canal anatomy on pulpotomy and revitalization procedures.

OBJECTIVES: This review aims to discuss the implications of anatomy of the root, pulp chamber, and canals on pulpotomy and revitalization procedures (RPs) as treatment alternatives to root canal treatment procedures. METHODS: This narrative review was undertaken to address two main questions - why remove vital pulp tissue in teeth with complex canal anatomy when it can be preserved? And why replace the necrotic pulp in teeth with mature roots with a synthetic material when we can revitalize? This review also aims to discuss anatomical challenges with pulpotomy and revitalization procedures. RESULTS: Maintaining the vitality of the pulp via partial or full pulpotomy procedures avoids the multiple potential challenges faced by clinicians during root canal treatment. However, carrying out pulpotomy procedures requires a meticulous understanding of the pulp chamber anatomy, which varies from tooth to tooth. Literature shows an increased interest in the application of RPs in teeth with mature roots; however, to date, the relation between the complexity of the root canal system and outcomes of RPs in necrotic multi-rooted teeth with mature roots is unclear and requires further robust comparative research and long-term follow-up. CONCLUSIONS: Whenever indicated, pulpotomy procedures are viable treatment options for vital teeth with mature roots; however, comparative, adequately powered studies with long-term follow-up are needed as a priority in this area. RPs show promising outcomes for necrotic teeth with mature roots that warrant more evidence in different tooth types with long-term follow-ups.  CLINICAL RELEVANCE: Clinicians should be aware of the pulp chamber anatomy, which is subject to morphological changes by age or as a defensive mechanism against microbial irritation, before practicing partial and full pulpotomy procedures. RP is a promising treatment option for teeth with immature roots, but more evidence is needed for its applications in teeth with mature roots. A universal consensus and considerably more robust evidence are needed for the standardization of RPs in teeth with mature roots.

Prevalence of Taurodontism in Contemporary and Historical Populations from Radom: A Biometric Analysis of Radiological Data.

Taurodontism is a morphological anomaly of multirooted molars characterized by apical displacement of the pulp chamber, shortened roots, and the absence of constriction at the dentoenamel junction. It can negatively impact the outcome of dental treatment plans. This study aimed to compare the prevalence of taurodontism among contemporary and historical populations from Radom, Poland. Five hundred eighty-two panoramic radiographs of contemporary patients and 600 radiographs of historical individuals were analyzed using the Shifman and Chanannel index. Group differences were determined with Pearson's chi-square tests according to sex, site, tooth group, and historical period. The study also evaluated the degree of severity of taurodontism in relation to dental groups, gender, and the periods from which contemporary patients as well as historical individuals originated. In the contemporary population, taurodontism was observed in 34% of individuals. In the historical data, the highest prevalence of taurodontism (31%) was observed among individuals from the 18th and 19th centuries, while earlier periods exhibited considerably lower prevalence rates. Across contemporary and historical populations, the maxillary molars were the most commonly affected teeth. Hypotaurodontism was the most prevalent form of taurodontism. The prevalence of taurodontism has gradually increased from the 11th century to the current day. The results of the research are of great importance for the clinician in terms of planning comprehensive dental treatment.

The impact of extended pulp chamber preparations on the clinical performance of endocrowns in Indian patients: A 1-year observational study.

Purpose: The limitations of foundation restorations have been reduced with the advent of endocrowns. Despite their success, the extent of endocrowns tooth preparation into the pulp chamber has not been fully explored in the literature. The study aimed to evaluate the clinical performance of endocrowns with 5 mm extended pulp chamber tooth preparations in Indian patients over a 1- year period using modified USPHS criteria. Methods: The observational study recruited 36 participants with definite criteria. Ceramic crown was planned for all the participants. Conventional endocrown tooth preparation was made with 5 mm pulpal extension. Clinical assessments were made at 0-, 6- and 12-months intervals using modified USPHS criteria. The data was statistically analyzed using Friedman test and Wilcoxon signed rank test. Results: One patient (2.8%) experienced loss of retention, marginal adaptation, and loss of anatomical form during 1-year follow up period. The majority of the participants (97.3%) reported no discomfort and high satisfaction. (P < .05) No opposing tooth wear was observed at 0- and 6-months. The results showed statistical significance in the parameters of retention, marginal adaptation, loss of anatomical form, and patient satisfaction. (P < .05). Conclusion: The clinical performance of endocrowns with extended pulp chamber preparation was satisfactory for a period of 12 months.

Static Guided Endodontic Approach for Pulp Canal Obliteration: A Case Report.

Traumatic injuries to the permanent dentition have deleterious sequelae if not treated adequately. In luxation injuries, it has been observed that tertiary dentin apposition may occur and can lead to calcification and closure of the pulp space. This is commonly referred to as pulp canal calcification or pulp canal obliteration. This often presents a challenge to clinicians when endodontic treatment is indicated. Static guided endodontic therapy has been advocated in such cases and has been successfully employed as a treatment strategy in recent years. This involves the design and fabrication of a digital stent, which serves as a guide for the clinician and provides a straight path to the targeted tissue site. This article reports a case of pulp canal obliteration secondary to a luxation injury sustained due to a vehicular accident. The case was treated using the static guided endodontic approach to achieve a minimal direct access to the targeted pulp chamber space.

Effect of sodium hypochlorite on bonding performance of universal adhesives to pulp chamber dentin.

Abstract Background/purpose: The most widely utilized irrigation solution in endodontic therapy is sodium hypochlorite (NaOCl). The purpose of this study was to assess the effects of NaOCl on the bond strength of four universal adhesives and one two-step self-etch adhesive to pulp chamber dentin. Materials and methods: One hundred sixteen extracted sound human third molars were used in this study. All the teeth were divided into two groups: (1) with NaOCl treatment and (2) without NaOCl treatment. These two groups were subdivided into five bonding groups: G-Premio Bond (GP), Beautibond Xtreme (BBX), Scotchbond Universal (SBU), Clearfil Universal Bond Quick (UBQ), and Clearfil Megabond 2 (MB2). The microtensile bond strength (µTBS), the fracture mode analysis, resin-dentin interface and dentin surface were observed by SEM. Two-way ANOVA was performed to analyze the µTBS (α = 0.05). Results: The µTBS of the NaOCl group significantly decreased for GP and MB2 (P < 0.05). Significant effects of adhesive (F = 12.182, P < 0.001), and irrigation (F = 27.224, P < 0.001) on the µTBS were observed, whereas interaction between adhesive and irrigation was not significant (F = 1.761, P = 0.144). The adhesive layer with variable thickness was observed in all groups with different morphological structures. Conclusion: The effect of NaOCl treatment on the µTBS differs depending on the type of adhesives.

Effect of pulp chamber depth on failure load and mode of failure of CAD/CAM endocrowns.

AIM: The present study aimed to investigate the effect of pulp chamber depth on the failure load and mode of failure of CAD/CAM endocrowns. MATERIALS AND METHODS: Thirty mandibular molars were sectioned above the cementoenamel junction (CEJ), followed by root canal treatment. Teeth were sectioned at a level of 1.5 mm above the CEJ, arranged from the lowest to the highest depths, and divided into three groups (n = 10): group SE: Shallow pulp chamber (1.42 to 2.17 mm); group IE: Intermediate pulp chamber (2.25 to 3.17 mm); group DE: Deep pulp chamber (3.33 to 5.17 mm). CAD/CAM endocrowns were fabricated by milling lithium disilicate ceramic blocks and were cemented using resin cement. Teeth were embedded in acrylic resin at 2 mm below the CEJ, and a compressive load was applied to create a 45-degree angled functional loading simulation until the occurrence of failure. RESULTS: The mean failure loads were highest in group DE (1893.75 ± 496.08 N) compared with groups IE (1103.71 ± 254.59 N) and SE (1084.63 ± 240.92 N), with statistically significant differences between group DE and both groups IE and SE (P < 0.001). Pearson correlation coefficient (PCC) revealed a strong positive correlation between the pulp chamber depth and failure load of the endocrowns. The failure mode for all samples was catastrophic failure. CONCLUSION: The pulp chamber depth affected the failure load of the teeth restored with endocrowns. The failure loads were higher in teeth with a greater pulp chamber depth. (Int J Comput Dent 2023;26(1): 31-0; doi: 10.3290/j.ijcd.b3818295).

Protocolo para diafanización dental / Protocol for dental diafanization

Antecedentes: La Diafanización dental es una técnica que permite transparentar los dientes haciendo visible la anatomía interna de los conductos radiculares ofreciendo una herramienta pedagógica económica y confiable; sin embargo, la literatura no reporta protocolos estandarizados para obtener una diafanización dental predecible. Objetivo: Obtener un protocolo estandarizado para diafanización dental, como modelo educativo, a partir de la revisión de la literatura y la realización de un estudio piloto. Materiales y Métodos: Se realizó una búsqueda sistemática en las bases de datos Scopus y Medline con los términos Mesh "root canal", "diaphonization", "clearing", "morphology" anatomy", y se estructuró una tabla de extracción con las variables más representativas para establecer las 3 fases de la Diafanización, a. Descalcificación, se evaluó Ácido Nítrico 5% (HNO3), Ácido Fórmico 10% (CH2O2) y EDTA 10%, b. Deshidratación, se empleó Alcoholes etílicos ascendentes, c. Clarificación, se evaluó Metil Salicilato y Aceite de Inmersión Sintético. Se seleccionaron 54 dientes, 36 sin endodoncia, y 18 con endodoncia, y se distribuyeron en dos grupos: Grupo A. Dientes sin endodoncia, Grupo B. Dientes con endodoncia, constituidos por 18 subgrupos que estaban definidos de acuerdo al tipo de descalcificante, momento de aplicación medio de contraste y medio de Clarificación. Resultados: El Ácido Nítrico al 5% pese a que fue el más corrosivo, permitió el mayor flujo y accesibilidad para el medio de contraste (Tinta China) en especímenes sin endodoncia. De igual manera, el Ácido Fórmico al 10%, preservó la estructura de los dientes tratados endodónticamente. El Metil Salicilato como clarificante, brindó mejores resultados visuales alcanzando una mayor transparencia. Conclusiones: El desarrollo de un estudio piloto para estandarizar técnicas de diafanización en odontología, permite la estructuración de un protocolo educativo que posibilita conocer la gran variabilidad anatómica de los dientes y la comprensión y análisis de los dientes que han si do tratados endodóncicamente, aportando una herramienta pedagógica para la comprensión de la anatomía radicular. El uso de Ácido Fórmico al 10%, en dientes con tratamiento de endodoncia y de Ácido Nítrico 5% en dientes sin endodoncia, c on una transparencia alcanzada por el uso del Metil Salicilato, muestran los mejores resultados visuales en anatomía y obturación endodóntica.

Background: Dental diaphonization is a technique that allows the teeth to be made transparent, making the internal anatomy of the root canals visible, offering an economical and reliable pedagogical tool; however,the literature does not report standardized protocols to obtain a predictable dental clearance. Aim: obtain a standardized protocol for dental diaphonization as an educative model from the review of the literature and the realization of a pilot study. Materials and methods: A systematic search was made on databases Scopus and Medline, with the Mesh terms "root canal", "diaphonization", "clearing", "morphology" and, "anatomy", and an extraction table was structured wit h the most representative variables to establish the three diaphanization phases, a. Decalcification, 5% Nitric Acid, 10% Formic Acid (TBD-2) and 10% EDTA were evaluated, b. Dehydration, ascending Ethyl Alcohols were used, c. Clarification, Methyl Salicylate, a nd Immersion synthetic oil were evaluated. 54 teeth were selected, 36 without root canal treatment and 18 with root canal treatment, then they were distributed into two groups: Group A, Teeth without root canal treatment, and Group B, Teeth with root canal treatment. Each group was constituted of 18 subgroups defined in order of the decalcification agent type, moment of the contrast medium application, and clarification agent type. Results: Even though 5% Nitric Acid was the most corrosive agent, it allowed a better flow and accessibility for the contrast medium (Chinese ink) in teeth without root canal treatment. Likewise, 10% Formic Acid preserved the structure of the endodontic tooth. As a clarification agent, the Methyl Salicylate showed better visual results, achieving greater transparency. Conclusion: The development of a pilot study aimed to standardize diaphonization techniques in dentistry allows the structuring of educative protocols that permit knowing the great tooth anatomic variability and the comprehension as well as the analysis of the root canal treated teeth, contributing to a pedagogic tool for the root anatomy awareness. Using 10% Formic Acid on root canal-treated teeth and 5% Nitric Acid on root canal not treated teeth, with transparency achieved by using Methyl Salicylate, showed better visual results on anatomy and endodontic filling

Effect of novel biomodification strategies on bonding to pulp chamber dentin - An In Vitro study.

Context: Adhesion to dentin remains a tough challenge due to its heterogeneous composition, complex histologic structure and high tubular content, warranting the need to investigate methods to improve the bond strength of the commonly used access restorative materials to pulp chamber dentin. Aims: To evaluate the effect of dentin biomodification using 6.5% grape seed extract and a 980 nm diode LASER on the shear bond strength of resin-based bonded restoration to pulp chamber dentin. Methods and Materials: Access cavities were prepared in 42 extracted human maxillary premolars, which were then sectioned in a buccolingual direction. The samples were serially immersed in 5.25% NaOCl for 40 minutes and 17% EDTA for 3 minutes and allocated into three groups: the control group, the group pre-treated with 6.5% grape seed extract (GSE) and the group pre-treated with a 980 nm diode light amplification by stimulated emission of radiation (LASER). All the samples were restored with resin composites and subjected to shear bond strength testing using a universal testing machine. Statistical Analysis Used: Statistical analysis was done using SPSS version 23 software. Results: The mean shear bond strength was highest in the group pre-treated with GSE, followed by that pre-treated with diode LASER and finally in the control group. Conclusions: Dentin biomodification using both chemical and physical agents such as grape seed extract and diode LASER was shown to improve the shear bond strength of resin composite endodontic access restorations to the pulp chamber dentin.

The morphology of the pulp chamber floor of permanent mandibular first and second molars in an Indian subpopulation-a descriptive cross-sectional study employing Pawar and Singh classification.

Background: Mandibular molars are multi-rooted teeth with a complex and strenuous root canal anatomy. Because there is relatively negligible literature describing the pulp chamber floor anatomy, predicting the exact anatomical layout and its variations is daunting. A thorough comprehension and knowledge of the same is required for efficacious endodontic treatment consequence. The purpose of this study was to characterise and ascertain the pulp chamber floor anatomy of permanent mandibular first (ManFMs) and second (ManSMs) molars in an Indian population. Methods: On 2,134 extracted human mandibular first (ManFMs = 1,067) and second molars (ManSMs = 1,067), a descriptive cross-sectional investigation was executed. Cleaning and removal of hard and soft tissue debris were performed, followed by flattening the anatomical crown until the pupal architecture was uncovered. A stereomicroscope with a magnification of 4.5 magnification was used to investigate the pulpal anatomy. Statistical analysis was carried out using chi square test, with 95% confidence intervals and a p value of 0.05 considered statistically significant. Results: The majority of the ManFMs showed presence of three canal orifices in 57.73%, followed by four orifices 31.31%, five orifices 8.81%, and six orifices 2.15%. For ManSMs, majorly three orifices were found in 39.83% specimens, followed by two orifices in 37.39%, four orifices in 16.31%, and single root canal orifice was observed in 6.47%. The mesio-buccal, mesio-lingual, disto-buccal, disto-lingual canal orifices exhibited round and oval shapes in both ManFMs and ManSMs. The shape was predominantly oval with a single distal canal orifice (84.25% ManFMs and 74.16% ManSMs). In ManSMs, among the single root canal orifice, 66.66% were round in shape and 33.34% were C-shaped. In ManSMs with two root canal orifices, mesially 79.44% exhibited oval and 20.56% round shape. Distally, 74.16% were oval and 25.84% were round. The shapes of the access cavities for ManFMs were rectangular in 46.67% and triangular in 53.33%. For the ManSMs, the access cavities were triangular in 39.83%, rectangular in 16.31% and non-classified (others) in 43.86% of specimen. In both ManFMs and ManSMs, the pulp chamber floor morphology was predominately Y shaped (57.73% and 39.83%) according to the Pawar and Singh classification© of pulp chamber floor anatomy. Conclusion: Our study indicated that the orifices on the pulp chamber floor are arranged in a typical manner, supporting the proposed categorization. Furthermore, description of the anatomical patterns of the pulp chamber guides the clinicians in chair-side treatment decisions.

How does indirect air-cooling influence pulp chamber temperature in different volume teeth and absence/presence of resin-based composite during light curing?

BACKGROUND: Light-curing of materials during restorative dental procedures poses a risk for pulp tissue overheating. Therefore, the aim of this study was to investigate the effect of indirect air-cooling on pulp chamber temperatures during light-curing of varying volume teeth and absence/presence of resin-based composite (RBC) at different exposure time. METHODS: The volume of 11 human teeth was measured by micro computed tomograph. An experimental rig controlled the thermal environment of the teeth and a thermocouple inserted retrograde into the root canal measured temperature changes. Pulp chamber temperature was measured with and without air-cooling on teeth without and with RBC at 15 s, 30 s and 60 s intervals. Generalized estimating equations were used for statistical analysis. RESULTS: The temperature increase with air-cooling (versus no air-cooling) was lower in teeth despite absence/presence of RBC (ß = - 4.26, 95%CI - 5.33 and ß = - 4.47, 95%CI - 5.60, respectively). With air-cooling, the temperature increase in teeth with RBC was lower compared to teeth without RBC (ß = - 0.42, 95%CI -0.79; - 0.05). Higher teeth volume resulted in lower temperature increase with air-cooling than without air-cooling (ß = - 0.04, 95%CI -0.07; - 0.01 and ß = - 0.17, 95%CI -0.30; - 0.05, respectively). CONCLUSIONS: Air-cooling resulted in lower pulp chamber temperature increase. Using air-cooling, the temperature increase was lower in teeth with RBC compared to teeth without RBC. Lower volume teeth resulted in higher temperature increase, thus they seemed to benefit more from air-cooling compared to higher volume teeth. Air-cooling could be an effective tool in controlling pulp temperature increase during light-curing, especially when the tooth volume is small.

Time-dependent efficacy and safety of tooth bleaching with cold plasma and H2O2 gel.

BACKGROUND: Hydrogen peroxide (H2O2) is the commonly used bleaching agent for teeth. But it is highly corrosive to teeth for the high concentration. The cold atmospheric pressure plasma has been witnessed a novel tooth bleaching technology and could help strengthen the bleaching effect when combined with H2O2. However, the efficacy and safety might highly correlated with processing time. The present study aims to evaluate the time-dependent efficacy and safety of tooth bleaching with cold plasma and H2O2 gel in vitro. METHODS: The H2O2 concentrations of the gel used in the study are 6%, 15%, 25% and 35%, respectively and the treatment time varies from 5 to 20 min. The tooth bleaching effect was evaluated by a Crystaleye Spectrophotometer and the overall change of the colorimetric value based on three independent measurements. Meanwhile, the microhardness, roughness and tooth temperature were evaluated. The surface morphology and the elemental composition were determined by scanning electron microscope and energy-dispersive X-ray spectroscopy. RESULTS: 5 min bleaching treatment contributed to 60% of the bleaching effect maximum, the 10 min effect was close to 15 min effect. Meanwhile, the microhardness reduced and roughness increased under a treatment which was longer than 20 min. Tooth pulp chamber temperature was keeping in a safe range within 20 min treatment. CONCLUSION: 5-10 min was the best treatment time from which we can get an ideal tooth bleaching effect and less influence on tooth enamel and pulp tissue when using cold plasma and H2O2 gel.

Morphological, histological, and chemical analysis of first permanent molars with molar incisor malformation.

PURPOSE: Molar incisor malformation (MIM) is a dental anomaly rendering first permanent molar pulps inflamed/necrotic at a young age. It often affects permanent incisors, primary second molars and less frequently other teeth. The purpose of this study was to investigate the anatomy and histology of MIM in seeking insight into its pathogenesis. METHODS: Five MIM first permanent molars were examined with micro-computed tomography (micro-CT) for 3D morphology, with scanning electron microscopy for microanatomy, with energy-dispersive X-ray spectrometer (EDS) for chemical composition and for histology with optical microscopy. Composition differences were statistically determined using one-way ANOVA. RESULTS: Micro-CT confirmed dentin abnormalities in the middle and cervical third of the crown in the form of the radiodense 'cervical mineralized diaphragm' (CMD). This was peripherally intertwined with enamel fjords and projections severely disrupting the integrity of pulp chamber and its continuity with root canals. EDS showed increased Ca in CMD compared to dentin. The histological examination revealed anomalous osteodentin-like hard tissue with denticles in the CMD. CONCLUSION: An interconnection of anomalous cervical enamel with crown CMD dentin preceded to the severe pulp chamber and root dysplasias in MIM molar teeth.

[Mechanisms of age-related changes in the morphology of the pulp system of the first lower molars]. / Mekhanizmy vozrastnykh izmenenii morfologii sistemy pul'py pervykh nizhnikh molyarov.

OBJECTIVE: To study the coupling of age-related systemic changes in inflammation-mediated apoptosis with the features of the anatomy of the pulp system of the first mandibular molars in patients with chronic pulpitis and periodontitis. MATERIAL AND METHODS: The study included 55 patients of both sexes from 18 to 75 years of age in three age groups - young (18-44 years) (n=17), middle (45-59 years) (n=18), elderly (60-74 years) (n=20) with indications for endodontic treatment. Diagnostic measures were supplemented with New Tom 3G cone-beam tomography. The concentration of anitapoptotic protein Bcl-XL and tumor necrosis factor-a (TNF-a) was determined in the blood, and the level of the nuclear transcription factor NF-KB subunit p65 was determined in the lysates of mononuclear cells. RESULTS: As a result of the analysis of the sections, significant obliteration of the pulp was revealed throughout and an increase in the frequency of occurrence of slit-shaped channels in the distal root of the first molar of the mandible in elderly patients. CONCLUSION: The pathogenetic factors leading to a change in the morphology of the pulp system include old age and an imbalance in the system of anti-inflammatory cytokine transcription mechanisms, which contributes to increased apoptosis and the protracted nature of inflammation.

Clinical insights into the three-dimensional anatomy of cheek teeth in alpacas based on micro-computed tomography - Part 2: Maxillary cheek teeth.

BACKGROUND: Scientific knowledge regarding alpaca dentistry is relatively limited despite its clinical implications. The present gap in available supportive data leads to limited treatment options for dental pathology in alpacas in comparison to other species. The main goal of this study was to gain novel insights into the general and pulp morphology of maxillary cheek teeth to allow development of more advanced treatment strategies in the future. Also, the risk of causing pulp exposure when floating maxillary cheek teeth was of particular interest. Concurent research focusing on the anatomy of mandibular cheek teeth has been performed accordingly. The results obtained in mandibular teeth are expected to be non-extrapolatable because of the structural differences between mandibular and maxillary teeth. RESULTS: Pulp morphology of maxillary cheek teeth showed great variation. A common pulp chamber was identified in 46/83 (55.4%) teeth with a mean dental age of 2 years and 7 months (± 2 years and 5 months). Pulpal segmentation was more commonly observed in teeth of increasing age. Full columnar segmentation was seen in 33/69 teeth (47.8%), whereas within-column segmentation was observed in 36/83 teeth (43.4%). Age and degree of segmentation of the pulpal tissue varied greatly according to Triadan position. Physical contact between roots of adjacent teeth was found in the majority of examined molars (range 82-94%) which resulted in morphological adaptations at the level of the root tips. The measured sub-occlusal dentinal thickness was as low as 0.46 mm above pulp horn 2 in a 14 years and 11 months old Triadan 09, emphasizing the risk of pulp exposure attributed to dental floating. CONCLUSION: This study offers an objective description of age-dependent maxillary cheek teeth pulp morphology in alpacas. Current findings are of great value to provide a basis for the development of tooth-saving techniques as a treatment for dental disease in this species. Observed physical contact between the roots of different examined molars may be a facilitating factor in the spread of apical infection in chronically diseased cases. Finally, a conservative approach regarding dental floating is recommended in order to avoid iatrogenic damage to pulp tissue.

Population-specific age estimation in Black Americans and Chinese people based on pulp chamber volume of first molars from cone beam computed tomography.

OBJECTIVES: To validate the fitness of the age estimation model in Black Americans, which was previously and solely established for the Chinese population based on pulp chamber volume of the first molars from cone beam computed tomography (CBCT), and to establish a new age estimation model for Black Americans. MATERIALS AND METHODS: A total of 203 subjects with CBCT scans, including 119 Chinese and 84 Black Americans, were retrospectively identified. The age range of subjects was between 11 and 87 years. For both populations, automated 3D pulp chamber segmentation of the first molars was performed by deep learning, followed by volume calculation and age estimation by a logarithmic regression model, which was established in a prior study solely on Chinese population. Additionally, a separate logarithmic regression analysis was carried out on Black Americans. The performance of age estimation was assessed by the mean absolute error (MAE), root mean square error (RMSE), Wilcoxon signed rank test, and coefficient of determination (R2) between the actual and estimated human ages. RESULTS: When applying the age estimation model established in the prior study, MAE = 7.994 years and RMSE = 10.065 years were observed in the Chinese population, while MAE = 14.049 years and RMSE = 17.866 years were observed in Black Americans. The new age estimation model established for Black Americans was AGE = 89.752 - 21.176 × lnV (V = pulp chamber volume), with MAE = 7.930 years, RMSE = 10.664 years, and coefficient of determination (R2) = 0.600. CONCLUSIONS: Population-specific age estimation is needed when applied in Black Americans and Chinese people based on pulp chamber volume of the first molars from CBCT.

Pulp changes from rapid maxillary expansion: A systematic review.

INTRODUCTION: This study aimed to systematically review the current evidence on the occurrence of pulp changes as side effects from orthopaedic rapid maxillary expansion (ORME) or surgically assisted rapid maxillary expansion (SARME). METHODS: An electronic search was performed in eleven databases. The eligibility criteria included clinical studies assessing vitality, sensibility or dimensions of the pulp chamber of permanent teeth before and after ORME or SARME, without restrictions on publication year or language. The risk of bias was analysed with the NIH 'Quality Assessment Tool for Before-After (Pre-Post) Studies with No Control Group' and the 'JBI for quasi-experimental studies' tool. The GRADE tool was used to assess the certainty of evidence. RESULTS: The initial search resulted in 1,197 records, from which only seven before-after studies were included. There was a change in the pulpal blood flow (PBF) of maxillary incisors and canines up to 5 days after SARME, which gradually returned after 7 days to 3 months. After ORME, one study observed an increased PBF and one study observed a reduced PBF, which gradually returned after the end of expansion. Two studies observed that both ORME and SARME caused temporary changes in pulp sensibility. Three studies observed a significant reduction in the pulp chamber after ORME or SARME. The outcomes presented a very low certainty of evidence. CONCLUSIONS: Although limited, the evidence shows that ORME and SARME caused temporary changes in pulp vitality and sensibility, with the possibility of inducing a reduction in pulp chamber dimensions.