Well-of-the-well (WOW) versus polyester mesh (PM): a comparison of single-embryo culture systems in bovines

Background: Mexico is innovating in the livestock industry through in vitro generation of bovine embryos with technologies such as well-of-the-well (WOW) and polyester mesh (PM) single-embryo culture systems. These techniques allow to maintain embryos in separate areas of a shared culture medium. Objective: To compare the quantity and quality of bovine embryos produced in WOW and PM culture systems versus the conventional (CG) culture system. Methods: In total, 345 embryos fertilized in vitro were evaluated for blastocyst yield in the three culture systems. To count blastocyst cell numbers, 69 embryos in each system were differentially stained for trophectoderm (TE), inner cell mass (ICM), and apoptotic cells. A qPCR gene expression analysis was performed for embryos in all three systems. Results: The WOW, PM and CG systems developed similar amount of blastocysts (41, 35 and 36%, respectively; p>0.05). Blastocysts in all three systems showed adequate amounts of ICM and apoptotic cells. Blastocysts in the PM system showed a greater number of TE cells [63.7 versus 58.6% in the CG system (p0.05). The ATP5B expression was higher in WOW than in PM (p0.05). The TJP3 expression was higher in PM than in WOW and CG (p<0.05). Expression of ID2 and CLDN4 was higher in WOW than in PM and CG (p<0.05). The biplot graphic from Principal Component Analysis (PCA) revealed that CG was located near degenerated embryos, whereas PM was located near arrested embryos, larger ICM and TE, and TJP3 expression. The WOW was located toward blastocysts, morulae, and expression of CLDN4, ID2 and GNAS. Conclusion: Compared with CG, both the PM and WOW systems are good options for culturing single embryos in the bovine model. Moreover, the PCA results suggest that embryos developed in the WOW system have greater capacity for generating blastocysts with increased ability to form TE and ICM layers, which might improve implantation.

Antecedentes: México está innovando en la industria ganadera a través de la generación in vitro de embriones bovinos con tecnologías de cultivo individual como lo son Pozo dentro de Pozo (WOW) y Malla de Poliéster (PM). Estos mantienen los embriones en áreas separadas mientras comparten un mismo medio de cultivo celular. Objetivo: Comparar la cantidad y calidad de embriones bovinos producidos en los sistemas WOW y PM contra el sistema de cultivo convencional en grupo (CG). Métodos: En total se evaluaron 345 embriones fertilizados in vitro para determinar la producción de blastocistos generados en los tres sistemas. Para contar el número de células por blastocisto, 69 embriones en cada sistema se tiñeron diferencialmente para trofectodermo (TE), masa celular interna (ICM) y células apoptóticas. Se realizó un análisis de expresión génica por qPCR de los embriones obtenidos en los tres sistemas. Resultados: Los sistemas WOW, PM y CG desarrollaron similares cantidades de blastocistos (41, 35 y 36%, respectivamente; p>0,05). Los blastocistos en los tres sistemas mostraron cantidades adecuadas de ICM y células apoptóticas. Los blastocistos en el sistema PM mostraron un mayor número de células TE [63,7% versus 58,6% en el sistema CG (p0,05). La expresión de ATP5B fue mayor en WOW que en PM (p<0,05), pero similar a CG (p<0,05). La expresión de TJP3 fue mayor en PM que en WOW y CG (p<0,05). La expresión de ID2 y CLDN4 fue mayor en WOW que en PM y CG (p<0,05). El gráfico de biplot del análisis de componentes principales reveló que CG se encontró cerca de embriones degenerados, mientras que PM se encontró cerca de embriones en arresto, ICM, TE, y TJP3. El WOW se localizó hacia blastocistos, mórulas y la expresión de CLDN4, ID2 y GNAS. Conclusión: En el modelo bovino los sistemas PM y WOW son buenas opciones para cultivar embriones individuales, ya que se obtienen resultados muy similares a los obtenidos con el sistema CG. Además, los resultados de PCA sugieren que los embriones individuales desarrollados en el sistema WOW generan blastocistos con mayor capacidad de formar TE e ICM, lo que podría mejorar su éxito de implantación.

Antecedentes: O México está inovando na indústria pecuária por meio da geração in vitro de embriões bovinos com tecnologias de cultura de embriões individuais, bem como em poço (WOW) e malha de poliéster (PM). Estes mantêm os embriões em áreas separadas, enquanto compartilham o mesmo meio de cultura de células. Objetivo: Comparar a quantidade e a qualidade de embriões bovinos produzidos nos sistemas de cultura WOW e PM com o sistema convencional de cultura em grupo (CG). Métodos: No total, 345 embriões fertilizados in vitro foram avaliados para determinar a produção de blastocistos gerados nos três sistemas. O número de células por blatocisto foi contado, 69 embriões em cada sistema foram diferencialmente corados para trofectoderme (TE), massa celular interna (ICM) e células apoptóticas. Uma análise de expressão gênica qPCR foi realizada para os embriões obtidos nos três sistemas. Resultados: Os sistemas WOW, PM e CG desenvolveram quantidades semelhantes de blastocistos (41, 35 e 36%, respectivamente; p>0,05). Os blastocistos nos três sistemas mostraram quantidades adequadas de ICM e células apoptóticas. Os blastocistos no sistema PM mostraram um número maior de células TE [63,7 versus 58,6% no sistema CG (p0,05). A expressão de ATP5B foi maior no WOW do que no PM (p<0,05), mas semelhante ao GC (p<0,05). A expressão de TJP3 foi maior no PM do que no WOW e CG (p<0,05). A expressão de ID2 e CLDN4 foi maior no WOW do que no PM e CG (p<0,05). O gráfico biplot da análise de componentes principais revelou que CG foi encontrado próximo a embriões degenerados, enquanto PM foi encontrado próximo a embriões presos, ICM, TE e TJP3. WOW foi encontrado para ter blastocistos, mórulas e a expressão de CLDN4, ID2 e GNAS. Conclusão: Em comparação com o CG, os sistemas PM e WOW são boas opções para a cultura de embriões individuais no modelo bovino. Além disso, os resultados da PCA sugerem que embriões individuais desenvolvidos no sistema WOW têm maior capacidade de desenvolver blastocistos com maior capacidade de formar as camadas TE e ICM, o que poderia melhorar seu sucesso de implantação.

Individual assessment of bovine embryo development using a homemade chamber reveals kinetic patterns of success and failure to reach blastocyst stage.

Most early developmental data are lost in bovine embryo culture systems. We developed and validated a method for culture of bovine embryos in groups that allow individual assessment. An autoclavable low-cost multiembryo chamber (MEC) was prepared using a polyester mesh fixed to a glass coverslip. Embryonic development was not affected by MEC. Compared to conventional bovine culture system (oil-covered drops, control), cleavage (C, 71.2 ± 7.8%; MEC, 74.3 ± 6.0%), blastocyst rate (C, 29.9 ± 4.4%; MEC, 28.3 ± 5.0%) and blastocyst cell number (C, 94.1 ± 9.7; MEC, 92.9 ± 5.3) were similar. Caspase 3 positive cell index in blastocysts was increased in MEC group, but apoptosis rate was below 5% (C, 2.9 ± 0.5; MEC, 4.6 ± 0.6). Using MEC, we performed a retrospective analysis for 'failure' and 'success' embryos, based on their ability to reach the blastocyst stage. We detected the majority of 'success' embryos displayed 8 cells at 48 h post-insemination (hpi) (48.7%), but blastocysts derived from this pattern presented lower cell numbers (91.3 ± 4.2 vs. 107.9 ± 4.9) and higher apoptosis index (6.2 ± 0.6 vs. 4.4 ± 0.5) than blastocysts from 4-cell embryos at 48 hpi. Most (72.0%) embryos that were at morula stage 120 hpi reached blastocyst stage at 168 hpi. Those blastocysts presented more number of cells than blastocysts derived from embryos exhibiting 16 cells at 120 hpi (108.6 ± 4.1 vs. 83.9 ± 4.8). Combination of embryo kinetics data at 48 and 120 hpi revealed high chances of blastocyst formation for patterns: 8 cells/morula, 4 cells/morula, 8 cells/16 cells and 4 cells/16 cells. Blastocysts formed from 4-cell/morula and 8-cell/morula patterns represented 69% of all 168 hpi blastocysts. Blastocysts derived from 4 cells/16 cells displayed decreased apoptosis (3.1 ± 0.6). Our results suggest that MEC can be used for bovine embryo culture without detrimental effects on development and can help to predict blastocyst formation and quality of in vitro fertilization (IVF) embryos. Abbreviations: BSA: bovine serum albumine; COC: cumulus-oocyte complex; FERT-TALP: Tyrode's albumin lactate pyruvate fertilization; FBS: fetal bovine serum; IVF: in vitro fertilization; MEC: multiembryo chamber; PBS: phosphate buffered saline; SOF-AA: synthetic oviductal fluid with amino acids medium; TCM: Tissue Culture Medium.

Sex differences in single IVF-derived bovine embryo cultured in chemically defined medium.

Single embryo culture is essential for culturing embryos derived from few oocytes obtained from elite cows through ultrasonography guidance. Bovine in vitro fertilization (IVF) and individual embryo culture is a challenge as it generally leads to impaired embryo development. In this study, we explored the embryonic development and the sex ratio of IVF-derived bovine embryo cultured individually in chemically defined two-step culture medium. Total 63 cumulus-oocyte complexes were collected, in vitro matured, in vitro fertilized and the resultant fertilized oocytes were randomly cultured individually (4 trials, 15-16 oocytes each) in microdrops of 5 µL of a chemically defined two-step culture medium. Blastocysts were counted in every trial (n = 32, 50.79%) and all of them were used for both genomic DNA and total RNA extraction, cDNA synthesis and PCR using specific primers for GAPDH, GDP6, XIST and SRY genes. Results showed significant difference in expression of XIST (positive expression in 11 blastocysts) and SRY (positive expression in 21 blastocysts) mRNAs, P < .05. This result supports the hypothesis of sexual dimorphism among the pre-implantation in vitro produced embryos and provides an efficient medium for single bovine embryos in vitro production.