Hydrophobic deep eutectic solvent (HDES) as oil phase in lipid-based drug formulations.

There is increasing pharmaceutical interest in deep eutectic solvents not only as a green alternative to organic solvents in drug manufacturing, but also as liquid formulation for drug delivery. The present work introduces a hydrophobic deep eutectic solvent (HDES) to the field of lipid-based formulations (LBF). Phase behavior of a mixture with 2:1 M ratio of decanoic- to dodecanoic acid was studied experimentally and described by thermodynamic modelling. Venetoclax was selected as a hydrophobic model drug and studied by atomistic molecular dynamics simulations of the mixtures. As a result, valuable molecular insights were gained into the interaction networks between the different components. Moreover, experimentally the HDES showed greatly enhanced drug solubilization compared to conventional glyceride-based vehicles, but aqueous dispersion behavior was limited. Hence surfactants were studied for their ability to improve aqueous dispersion and addition of Tween 80 resulted in lowest droplet sizes and high in vitro drug release. In conclusion, the combination of HDES with surfactant(s) provides a novel LBF with high pharmaceutical potential. However, the components must be finely balanced to keep the integrity of the solubilizing HDES, while enabling sufficient dispersion and drug release.

Exploring the versatility of biodegradable biomass aerogels: In-depth evaluation of Firmiana simplex bark microfibers depolymerized by deep eutectic solvent.

In this study, we investigated the use of deep eutectic solvents (DESs) at different molar ratios and temperatures as a green and efficient approach for microfibers (MFs) extraction. Our approach entailed the utilization of Firmiana simplex bark (FSB) fibers, enabling the production of different dimensions of FSB microfibers (FSBMFs) by combining DES pretreatment and mechanical disintegration technique. The proposed practice demonstrates the simplicity and effectiveness of the method. The morphology of the prepared microfibers was studied using the Scanning electron microscopic (SEM) technique. Additionally, the results revealed that the chemical and mechanical treatments did not significantly alter the well-preserved cellulose structure of microfibers, and a crystallinity index of 56.6 % for FSB fibers and 63.8 % for FSBMFs was observed by X-ray diffraction (XRD) analysis. Furthermore, using the freeze-drying technique, FSBMFs in water solutions produced effective aerogels for air purification application. In comparison to commercial mask (CM), FSBMF aerogels' superior hierarchical cellular architectures allowed them to attain excellent filtration efficiencies of 94.48 % (PM10) and 91.51 % (PM2.5) as well as excellent degradation properties were analyzed. The findings show that FSBMFs can be extracted from Firmiana simplex bark, a natural cellulose-rich material, using DES for environmentally friendly aerogel preparation and applications.

Dilute Electrolytes with Fluorine-free Ether Solvents for 4.5 V Lithium Metal Batteries.

The limited oxidation stability of ether solvents has posed significant challenges for their applications in high-voltage lithium metal batteries (LMBs). To tackle this issue, the prevailing strategy either adopts a high concentration of fluorinated salts or relies on highly fluorinated solvents, which will significantly increase the manufacturing cost and create severe environmental hazards. Herein, an alternative and sustainable salt engineering approach is proposed to enable the utilization of dilute electrolytes consisting of fluorine (F)-free ethers in high-voltage LMBs. The proposed 0.8 M electrolyte supports stable lithium plating-stripping with a high Coulombic efficiency of 99.47% and effectively mitigates the metal dissolution, phase transition, and gas release issues of the LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode upon charging to high voltages. Consequently, the 4.5 V high-loading Li||NCM 811 cell shows a capacity retention of 75.2% after 300 cycles. Multimodal experimental characterizations coupled with theoretical investigations demonstrate that the boron-containing salt plays a pivotal role in forming the passivation layers on both anode and cathode. The present simple and cost-effective electrolyte design strategy offers a promising and alternative avenue for using commercially mature, environmentally benign, and low-cost F-free ethers in high-voltage LMBs.

A Stable High-Performance Zn-Ion Batteries Enabled by Highly Compatible Polar Co-Solvent.

Uncontrollable growth of Zn dendrites, irreversible dissolution of cathode material and solidification of aqueous electrolyte at low temperatures severely restrict the development of aqueous Zn-ion batteries. In this work, 2,2,2-trifluoroethanol (TFEA) with a volume fraction of 50% as a highly compatible polar-solvent is introduced to 1.3 M Zn(CF3SO3)2 aqueous electrolyte, achieving stable high-performance Zn-ion batteries. Massive theoretical calculations and characterization analysis demonstrate that TFEA weakens the tip effect of Zn anode and restrains the growth of Zn dendrites due to electrostatic adsorption and coordinate with H2O to disrupt the hydrogen bonding network in water. Furthermore, TFEA increases the wettability of the cathode and alleviates the dissolution of V2O5, thus improving the capacity of the full battery. Based on those positive effects of TFEA on Zn anode, V2O5 cathode, and aqueous electrolyte, the Zn//Zn symmetric cell delivers a long cycle-life of 782 h at 5 mA cm-2 and 2 mA h cm-2. The full battery still declares an initial capacity of 116.78 mA h g-1, and persists 87.73% capacity in 2000 cycles at -25 °C. This work presents an effective strategy for fully compatible co-solvent to promote the stability of Zn anode, V2O5 cathode and aqueous electrolyte for high-performance Zn-ion batteries.

Lignin-based emulsive liquid-liquid microextraction for detecting triazole fungicides in water, juice, vinegar, and alcoholic beverages via UHPLC-MS/MS.

A universal, green, and rapid lignin-based emulsive liquid-liquid microextraction (ELLME) method was established to detect nine triazole fungicides in water, juice, vinegar, and alcoholic beverages via UHPLC-MS/MS. By employing an environmentally friendly emulsifier (lignin), the proposed ELLME was compatible with more extractants, and not restricted to fatty acids. Due to the high amphiphilic properties and three-dimensional structure of lignin, the emulsion was quickly formed through several aspirate-dispense cycles of the green extractant (guaiacol) and lignin solution. And a micropipette was used for rapid microextraction. The limit of detection was 0.0002-0.0057 µg L-1. The extraction recoveries and relative standard deviation were 81.7%-102.0% and 0.9%-7.1%, respectively. Finally, three green metric tools were used to verify the greenness of the whole procedure. The proposed lignin-based ELLME successfully emulsified green solvents, indicating that emerging solvents may be excellent alternatives as extractants in ELLME for pesticide residue analysis in food samples.

Methylimidazolium ionic liquids - a new class of forever chemicals with endocrine disrupting potential.

A class of chemical with a potentially important perceived future contribution to the net zero carbon goal (as "green" solvents) is the methylimidazolium ionic liquids (MILs). These solvents are used in industrial processes such as biofuel production yet little is known about their environmental stability or toxicity in man although one MIL - 1-octyl-3-methylimidazolium (M8OI) - has been shown to activate the human estrogen receptor alpha (ERα). The stabilities of the chloride unsubstituted methylimidazolium (MI) and MILs possessing increasing alkyl chain lengths (2C, 1-ethyl-3-methylimidazolium (EMI); 4C, 1-butyl-3-methylimidazolium (BMI); 6C; 1-hexyl-3-methylimidazolium (HMI), 8C, M8OI; 10C, 1-decyl-3-methylimidazolium (DMI)) were examined in river water and a human liver model system. The MILs were also screened for their abilities to activate the human ERα in vitro and induce uterine growth in pre-pubertal rats in vivo. Short chain MILs (EMI, BMI and HMI) underwent negligible metabolism and mineralisation in river water; were not metabolised in a model of human liver metabolism; activated the human ERα in vitro and were estrogenic in vivo in rats. A structure-based computational approach predicted short chain MIL binding to both the estrogen binding site and an additional site on the human estrogen receptor alpha. Longer chain MILs (M8OI and DMI) were metabolised in river water and partially mineralised. Based on structure-activity considerations, some of these environmentally-derived metabolites may however, remain a hazard to the population. MILs therefore have the potential to become forever chemicals with adverse effects to both man, other animals and the environment in general.

Deep eutectic solvent pretreatment of cellulose and development of hydrophobic foaming material.

This work aims to investigate the effects of deep eutectic solvents (DES) on the chemical and physical structure of cellulose. Choline chloride-oxalic acid and choline chloride-oxalic acid-glycerol were selected as solvents and cotton fibers was sued as raw materials to explore the difference between cotton fibers treated separately with two different DES. According to yield analysis, ternary solvents alleviated the degradation of cellulose when comparing to binary solvents, resulting in over 90 % of cellulose being obtained. Particularly, there is an esterification reaction of cellulose during treatment with the DES system, which also affects the performance of the subsequent products. Through the simple use of mechanical foaming with polyvinyl alcohol and the palm wax impregnation process, foams with a water contact angle greater than 140° and excellent mechanical properties can be obtained. The resultant foam material has 5 % linear elastic area, and prominent compressive strength providing potential use in the packaging industry in the replacement of plastic.

Carbon Dots: A Review with Focus on Sustainability.

Carbon dots (CDs) are an emerging class of nanomaterials with attractive optical properties, which promise to enable a variety of applications. An important and timely question is whether CDs can become a functional and sustainable alternative to incumbent optical nanomaterials, notably inorganic quantum dots. Herein, the current CD literature is comprehensively reviewed as regards to their synthesis and function, with a focus on sustainability aspects. The study quantifies why it is attractive that CDs can be synthesized with biomass as the sole starting material and be free from toxic and precious metals and critical raw materials. It further describes and analyzes employed pretreatment, chemical-conversion, purification, and processing procedures, and highlights current issues with the usage of solvents, the energy and material efficiency, and the safety and waste management. It is specially shown that many reported synthesis and processing methods are concerningly wasteful with the utilization of non-sustainable solvents and energy. It is finally recommended that future studies should explicitly consider and discuss the environmental influence of the selected starting material, solvents, and generated byproducts, and that quantitative information on the required amounts of solvents, consumables, and energy should be provided to enable an evaluation of the presented methods in an upscaled sustainability context.

Advancing Green Chemistry in Antiviral Therapeutics: A Comprehensive Review.

Cytomegalovirus (CMV) is a prevalent virus across the world that belongs to the family Herpesviridae but remains dormant in the body unless the immune system is compromised. In addition, when the bacterium is compromised without any health risks, the infection spreads from one person to another person through body fluids, such as saliva, blood, etc. Ganciclovir is an anti- viral medication used in treating viral infections, especially in the treatment of CMV in people with acquired immune deficiency syndrome and immunity at risk. The quality control of ganciclovir in industries is carried out by using anti-green solvents in large volumes; these solvents are not safe in consideration of environmental factors and analysts. Also, the waste generation by these solvents causes hazardous effects on the environment. Further, using 12 green analytical chemistry principles promotes the awareness of analytical judgments among the research groups. It is a revolutionary step in the analytical field to enhance the safety of the environment, and analysts, apart from safety, help to control waste production and conserve energy-reducing occupational hazards. Many works have been carried out for the quality control of ganciclovir using different solvents, such as acetonitrile, methanol, etc. Despite this, there are no existing methods with green solvents or procedures to reduce energy and waste generation. Therefore, the purpose of this review is to understand the drug profile of ganciclovir and the methods developed.

Applications of Functional Polymeric Eutectogels.

Over the past two decades, deep eutectic solvents (DESs) have captured significant attention as an emergent class of solvents that have unique properties and applications in differing fields of chemistry. One area where DES systems find utility is the design of polymeric gels, often referred to as "eutectogels," which can be prepared either using a DES to replace a traditional solvent, or where monomers form part of the DES themselves. Due to the extensive network of intramolecular interactions (e.g., hydrogen bonding) and ionic species that exist in DES systems, polymeric eutectogels often possess appealing material properties-high adhesive strength, tuneable viscosity, rapid polymerization kinetics, good conductivity, as well as high strength and flexibility. In addition, non-covalent crosslinking approaches are possible due to the inherent interactions that exist in these materials. This review considers several key applications of polymeric eutectogels, including organic electronics, wearable sensor technologies, 3D printing resins, adhesives, and a range of various biomedical applications. The design, synthesis, and properties of these eutectogels are discussed, in addition to the advantages of this synthetic approach in comparison to traditional gel design. Perspectives on the future directions of this field are also highlighted.

Synthesis and Properties of Hydrophilic and Hydrophobic Deep Eutectic Solvents via Heating-Stirring and Ultrasound.

Deep eutectic solvents (DESs) have emerged as a greener alternative to other more polluting traditional solvents and have attracted a lot of interest in the last two decades. The DESs are less toxic dissolvents and have a lower environmental footprint. This paper presents an alternative synthesis method to the classical heating-stirring method. The ultrasound method is one of the most promising synthesis methods for DESs in terms of yield and energy efficiency. Therefore, the ultrasound synthesis method was studied to obtain hydrophobic (Aliquat 336:L-Menthol (3:7); Lidocaine:Decanoic acid (1:2)) and hydrophilic DESs based on choline chloride, urea, ethylene glycol and oxalic acid. The physical characterization of DESs via comparison of Fourier transform infrared (FTIR) spectra showed no difference between the DESs obtained by heating-stirring and ultrasound synthesis methods. The study and comparison of all the prepared DESs were carried out via nuclear magnetic resonance spectroscopy (NMR). The density and viscosity properties of DESs were evaluated. The density values were similar for both synthesis methods. However, differences in viscosity values were detected due to the presence of some water in hygroscopic DESs.

Experimental Study on the Transport Properties of 12 Novel Deep Eutectic Solvents.

Deep eutectic solvents (DESs) are complex substances composed of two or three components, wherein hydrogen bond donors and acceptors engage in intricate interactions within a hydrogen bond network. They have attracted extensive attention from researchers due to their easy synthesis, cost-effectiveness, broad liquid range, good stability, and for being green and non-toxic. However, studies on the physical properties of DESs are still scarce and many theories are not perfect enough, which limits the application of DESs in engineering practice. In this study, twelve DESs were synthesized by using choline chloride and betaine as HBAs, and ethylene glycol, polyethylene glycol 600, o-cresol, glycerol, and lactic acid as HBDs. The variation rules of their thermal conductivity and viscosity with temperature at atmospheric pressure were systematically investigated. The experimental results showed that the thermal conductivity of the 1:4 choline chloride/glycerol solvent was the largest at 294 K, reaching 0.2456 W·m-1·K-1, which could satisfy the demand for high efficiency heat transfer by heat-transferring workpieces. The temperature-viscosity relationship of the DESs was fitted using the Arrhenius model, and the maximum average absolute deviation was 6.77%.

Ultrasonic extraction of Inula viscosa: Enhancing antioxidant bioactivity and its application in sunflower oil as an antioxidant.

The objective of this study was to optimize the ultrasound-assisted extraction (UAE) of Inula viscosa, focusing on the extraction yield, total phenolic content (TPC), total flavonoid content (TFC), and antioxidant capacity and to evaluate its antioxidant effect in sunflower oil (SFO) storage. A water-ethanol binary solvent system was applied to extract bioactive components sustainably. Extraction parameters (temperature, time, ethanol concentration, and solvent-to-solid ratio) were optimized using a central composite rotatable design, achieving high accuracy (R2 > 0.974). Optimum conditions were 54 % (v/v) ethanol concentration, 60 °C, 31 min, and a 15 (mL/g) solvent-to-solid ratio resulting in a yield of 24.72 g/g (%), TPC of 489.54 mg gallic acid/g, TFC of 149.81 mg quercetin/g, and IC50 of 18.21 µg/mL. UAE outperformed Soxhlet extraction in yield, bioactive compound composition, and antioxidant capacity. Strong correlations were found between TPC, TFC, and antioxidant capacity, with TFC having a more significant impact. I. viscosa extract was found to be a potent antioxidant and delay the oxidation of SFO during accelerated storage due to peroxide value and oxidative induction time analysis. Microstructural analysis illuminated the structural changes induced by the extraction methods. In conclusion, this study not only optimized UAE of I.viscosa, showing superior efficiency and antioxidant capacity, but also demonstrated the practical application of I.viscosa in enhancing sunflower oil shelf life, thereby providing valuable insights for the field of food engineering and antioxidant research.

Hydrophobic binary mixtures containing amphotericin B as lipophilic solutions for the treatment of cutaneous leishmaniasis.

Cutaneous leishmaniasis, caused by Leishmania parasites, requires treatments with fewer side effects than those currently available. The development of a topical solution based on amphotericin B (AmB) was pursued. The considerable interest in deep eutectic solvents (DESs) and their remarkable advantages inspired the search for a suitable hydrophobic excipient. Various mixtures based on commonly used hydrogen bond donors (HBDs) and acceptors (HBAs) for DES preparations were explored. Initial physical and in-vitro screenings showed the potential of quaternary phosphonium salt-based mixtures. Through thermal analysis, it was determined that most of these mixtures did not exhibit eutectic behavior. X-ray scattering studies revealed a sponge-like nanoscale structure. The most promising formulation, based on a combination of trihexyl(tetradecyl)phosphonium chloride and 1-oleoyl-rac-glycerol, showed no deleterious effects through histological evaluation. AmB was fully solubilized at concentrations between 0.5 and 0.8 mg·mL-1, depending on the formulation. The monomeric state of AmB was observed by circular dichroism. In-vitro irritation tests demonstrated acceptable viability for AmB-based formulations up to 0.5 mg·mL-1. Additionally, an ex-vivo penetration study on pig ear skin revealed no transcutaneous passage, confirming AmB retention in healthy, unaffected skin.

Efficient removal of Chromium(VI) from wastewater based on magnetic multiwalled carbon nanotubes coupled with deep eutectic solvents.

Industrial wastewater containing heavy metal Cr(VI) seriously affects the health of organisms and may even lead to cancer. Developing efficient adsorbents that can quickly separate heavy metals is crucial for treating wastewater. In this study, magnetic multiwalled carbon nanotubes (MMWCNTs) with moderate particle size and abundant surface active sites were prepared by coating multiwalled carbon nanotubes with magnetic nanoparticles. The results of FTIR, XRD, TG, VSM, BET, and EDS showed MWCNTs completely encapsulated on the surface of the magnetic nanoparticles, with a particle size of approximately 30 nm. Oxygenated groups provided abundant surface active sites and formed numerous mesopores. The response surface methodology was used to optimize the adsorbent dose, adsorption contact time and adsorption temperature, and the removal rate of Cr(VI) was more than 95%. The quasi-second order kinetics and Freundlich adsorption isotherm model explained the adsorption process to Cr(VI). MMWCNTs interacted with Cr(VI) through electrostatic attraction, reduction reactions, complexation, and other means. The extensive hydrogen bonding of the green solvent deep eutectic solvent (DES) was employed to desorb the MMWCNTs and desorption rate exceed 90%. Even after five adsorption-regeneration cycles, the adsorbent maintained a high capacity. In conclusion, these novel MMWCNTs, as efficient adsorbents paired with DES desorption, hold broad potential for application in the treatment of Cr(VI)-contaminated wastewater.

Enantiomeric separation of nefopam and cathinone derivatives using a supramolecular deep eutectic solvent as a chiral selector in capillary electrophoresis.

The present study investigates the utilization of a supramolecular deep eutectic solvent (SUPRADES), consisting of sulfated-ß-cyclodextrin (S-ß-CD) and citric acid (CA), as a chiral selector (CS) in capillary electrophoresis for the enantiomeric separation of nefopam (NEF) and five cathinone derivatives (3-methylmethcathinone [3-MMC], 4-methylmethcathinone [4-MMC], 3,4-dimethylmethcathinone [3,4-DMMC], 4-methylethcathinone [4-MEC], and 3,4-methylendioxycathinone [MDMC]). A significant improvement in enantiomeric separation of the target analytes was observed upon the addition of S-ß-CD-CA to the background electrolyte (BGE), leading to a baseline separation of all analytes. In particular, the optimum percentage of S-ß-CD-CA, added to the BGE, was determined to be 0.075% v/v for NEF (Rs = 1.5) and 0.050% v/v for three out of five cathinone derivatives (Rs = 1.5, 1.6, and 2.4 for 3-MMC, 4-MEC, and 3,4-DMMC, respectively). In the case of 4-MMC and MDMC, a higher percentage of the CS, equal to 0.075% and 0.10% v/v, respectively, was required to achieve baseline separation (Rs = 1.5, 1.9 for MDMC and 4-MMC, respectively). The outcomes of the present study highlight the potential effectiveness of using SUPRADES as a CS in electrophoretic enantioseparations.

Scattering approaches to unravel protein solution behaviors in ionic liquids and deep eutectic solvents: From basic principles to recent developments.

Proteins in ionic liquids (ILs) and deep eutectic solvents (DESs) have gained significant attention due to their potential applications in various fields, including biocatalysis, bioseparation, biomolecular delivery, and structural biology. Scattering approaches including dynamic light scattering (DLS) and small-angle X-ray and neutron scattering (SAXS and SANS) have been used to understand the solution behavior of proteins at the nanoscale and microscale. This review provides a thorough exploration of the application of these scattering techniques to elucidate protein properties in ILs and DESs. Specifically, the review begins with the theoretical foundations of the relevant scattering approaches and describes the essential solvent properties of ILs and DESs linked to scattering such as refractive index, scattering length density, ion-pairs, liquid nanostructure, solvent aggregation, and specific ion effects. Next, a detailed introduction is provided on protein properties such as type, concentration, size, flexibility and structure as observed through scattering methodologies. This is followed by a review of the literature on the use of scattering for proteins in ILs and DESs. It is highlighted that enhanced data analysis and modeling tools are necessary for assessing protein flexibility and structure, and for understanding protein hydration, aggregation and specific ion effects. It is also noted that complementary approaches are recommended for comprehensively understanding the behavior of proteins in solution due to the complex interplay of factors, including ion-binding, dynamic hydration, intermolecular interactions, and specific ion effects. Finally, the challenges and potential research directions for this field are proposed, including experimental design, data analysis approaches, and supporting methods to obtain fundamental understandings of complex protein behavior and protein systems in solution. We envisage that this review will support further studies of protein interface science, and in particular studies on solvent and ion effects on proteins.

Biocatalysis in Non-Conventional Media: Unlocking the Potential for Sustainable Chiral Amine Synthesis.

The application of biocatalysis has become essential in both academic and industrial domains for the asymmetric synthesis of chiral amines, and it serves as an alternative tool to transition-metal catalysis and complements traditional chemical methods. It relies on the swift expansion of available processes, primarily as a result of advanced tools for enzyme discovery, combined with high-throughput laboratory evolution techniques for optimising biocatalysts. This manuscript highlights recent chemical and technological developments contributing to the sustainable applications of biocatalysis with industrial interest. Specifically, the use of non-conventional reaction media and the combination with photocatalysis can enhance production of chiral amines by allowing higher working concentrations and cascade transformations, leading to high yields and enantiomeric excesses. Furthermore, a selection of both known and modern strategies for enzyme immobilisation, along with the use of fed-batch and flow synthesis, demonstrates the potential to translate laboratory synthesis to effective scaled-up applications and improve the processing of large reaction volumes.

Influence of deep eutectic solvents on redox biocatalysis involving alcohol dehydrogenases.

Redox biocatalysis plays an increasingly important role in modern organic synthesis. The recent integration of novel media such as deep eutectic solvents (DESs) has significantly impacted this field of chemical biology. Alcohol dehydrogenases (ADHs) are important biocatalysts where their unique specificity is used for enantioselective synthesis. This review explores aspects of redox biocatalysis in the presence of DES both with whole cells and with isolated ADHs. In both cases, the presence of DES has a significant influence on the outcome of reactions albeit via different mechanisms. For whole cells, DES was shown to be a useful tool to direct product formation or configuration - a process of solvent engineering. Whole cells can tolerate DES as media components for the solubilization of hydrophobic substrates. In some cases, DES in the growth medium altered the enantioselectivity of whole cell transformations by solvent control. For isolated enzymes, on the other hand, the presence of DES promotes substrate solubility as well as enhancing enzyme stability and activity. DES can be employed as a smart solvent or smart cosubstrate particularly for cofactor regeneration purposes. From the literatures examined, it is suggested that DES based on choline chloride (ChCl) such as ChCl:Glycerol (Gly), ChCl:Glucose (Glu), and ChCl:1,4-butanediol (1,4-BD) are useful starting points for ADH-based redox biocatalysis. However, each specific reaction will require optimisation due to the influence of several factors on biocatalysis in DES. These include solvent composition, enzyme source, temperature, pH and ionic strength as well as the substrates and products under investigation.

Unlocking the Potential of Deep Eutectic Solvents and Ligand-to-Metal Charge Transfer Processes: A Reusable Iron-and-UV-Based System for Sustainable C-C Bond Formation.

Catalytic C-H functionalization has provided new opportunities to access novel organic molecules more sustainably and efficiently. However, these procedures typically rely on precious metals or complex organic catalysts as well as on hazardous solvents or reaction conditions. Herein, a pioneering methodology for direct C-C bond formation enabled by Ligand-to-Metal Charge Transfer (LMCT) and mediated by UV irradiation has been developed using Deep Eutectic Solvents (DESs) as sustainable reaction media. This direct C-H bond functionalization via a radical addition to electrophiles was successfully confirmed over a broad scope of substrates. More importantly, this is the first example of photocatalytic C-C bond formation in DESs. An inexpensive and abundant iron catalyst (FeCl3) was used under air and mild conditions. Different functional groups were well tolerated obtaining promising results that were comparable to those reported in the literature. Additionally, the reaction medium along with the catalyst could be reused for up to 5 consecutive cycles without a significant loss in the reaction outcome. Several green metrics were calculated and compared to those of conventional procedures, revealing the advantages of using DESs.