ABSTRACT
With the growing demand for sustainable development, tobacco stalks, as a resource-rich and low-cost renewable resource, hold the potential for producing high-value chemicals and materials within a circular economy. Due to the complex and unique structure of tobacco stalk biomass, traditional methods are ineffective in its utilization, making the pretreatment of tobacco stalk lignocellulose a crucial step in obtaining high-value products. This paper reviews recent advancements in various pretreatment technologies for tobacco stalk lignocellulosic biomass, including hydrothermal, steam explosion, acid, alkaline, organic solvent, ionic liquid, and deep eutectic solvent pretreatment. It emphasizes the impact and efficiency of these pretreatment methods on the conversion of tobacco stalk biomass and discusses the advantages and disadvantages of each technique. Finally, the paper forecasts future research directions in the pretreatment of tobacco stalk lignocellulose, providing new insights and methods for enhancing its efficient utilization.
ABSTRACT
Tobacco stalk is a cellulose-rich material and a sustainable alternative to be applied as a plant-based nanofibrillated cellulose (NFC) source. NFC use has garnered attention in the development of oral pharmaceutical forms, despite concerns about its safety due to the adverse effects of nicotine on health. Therefore, we aimed at establishing the safety of NFC derived from tobacco stalk for its potential use as a novel pharmaceutical excipient, exploring its potential functions for tablet production. We conducted acute and subchronic oral toxicity tests in adult female Wistar rats. Initially, individual animals received sequential doses (175-5,000 mg·kg-1) for 24 hours followed by a careful observation of any toxic effects. Subsequently, 20 rats were divided into four groups for a subchronic assay, evaluating toxicity signs, body weight changes, hematological, biochemical, and histopathological parameters. No deaths or other clinical toxicity signs were observed in either the acute or the subchronic assays. We noticed a significant reduction in body weight gain (p < 0.05) after 14 days. We found statistical differences for hematological and biochemical parameters, unrelated to dosage. There were no observed toxic effects, and tobacco stalk ingestion did not adversely affect organ morphology in the histopathological evaluation. The oral administration of NFC at 5,000 mg·kg-1 per day for 28 days was well-tolerated by treated rats, with no reported deaths. In conclusion, NFC derived from tobacco stalk has shown to be a sustainable and safe alternative for use as an excipient at experimental doses, demonstrating compatibility with its proposed applications.
Subject(s)
Cellulose , Excipients , Nicotiana , Rats, Wistar , Animals , Female , Cellulose/toxicity , Cellulose/administration & dosage , Cellulose/chemistry , Excipients/toxicity , Excipients/chemistry , Administration, Oral , Toxicity Tests, Subchronic , Rats , Toxicity Tests, Acute , Nanofibers/toxicity , Green Chemistry Technology , Dose-Response Relationship, DrugABSTRACT
Co-pyrolysis of sewage sludge (SS) and tobacco stalk (TS) was conducted, where TS are rich in inorganic elements. The effects of the mixing ratio and pyrolysis temperature on pyrolysis products were investigated through the tube furnace system. The components of gas and tar were determined. In addition, the N/S ratio, pore distribution characteristics, surface functional group characteristics, aromatisation characteristics and inorganic element content of char were studied. Results show that the addition of TS to SS has a significant synergistic effect. Particularly, when the ratio of SS to TS is 1:3, the pyrolysis gas yield is the largest. The inorganic elements with a catalytic effect can promote the conversion of char and tar into pyrolysis gas. However, with the increase in pyrolysis temperature, the synergistic effect will gradually weaken. The increase in pyrolysis temperature will promote the development of mesopores in char but will reduce the order degree of the char structure. The addition of TS in SS will further increase the number of mesopores in char, and the obtained char carbon structure is more ordered. When the pyrolysis temperature is 600 °C, the tar yield is the highest, and the higher the mixing ratio of SS, the better the formation of polyaromatic compounds and aliphatic hydrocarbons.
Subject(s)
Nicotiana , Sewage , Pyrolysis , Temperature , CarbonABSTRACT
Lignin polymer as a natural aromatic macromolecule presents significant prospects in producing functional and sustainable materials, and achieving a comprehensive characterization will facilitate their target valorization. In the present study, deep eutectic solvent (DES) and alkaline delignification were adopted to deconstruct tobacco stalk before and after hydrothermal pretreatment, obtaining diverse lignin fractions with fascinating characteristics. DES lignin exhibited a higher yield and homogenous molecular structure than MWL. A severe cleavage of the inter-unit linkages in lignin was also observed. This result mostly originated from the efficient delignification of the DES deconstruction system adopted. Moreover, all the recovered lignin fractions exhibited good micro-nanoparticle size that can enhance the valorization of lignin in nanomaterial production, in which the hydrothermal-assisted DES deconstruction promoted the formation of the smaller lignin nanoparticle size. Next, all the recovered lignin presented an excellent UV absorption and structure-related absorption performance or thermal properties. Overall, this work provides an important foundation for further exploiting DES/alkaline delignification lignin that can be applied as an ideal feedstock for producing sustainable functional or micro/nanomaterials.
ABSTRACT
The present investigation utilizes tobacco stalks flour and magnesium oxysulfate whiskers as fillers to enhancers the recycle polypropylene through melt blending and injection molding. Studied the microscopic morphology, mechanical, thermal, and antibacterial properties of recycled polypropylene (rPP) based composites with different weight ratios of tobacco stalks flour (TSF) and magnesium oxysulfate whiskers (MOSw). Composites' morphological studies indicated that tobacco stalks flour, and recycled polypropylene has good adhesion, improving composites' mechanical properties. The addition of TSF did not significantly change the tensile strength of rPP, but it can effectively increase the flexural strength and flexural modulus. Compared with rPP, adding 30 wt% tobacco stalks flour to rPP can increase the flexural strength by about 32.74%. Meanwhile, the addition of magnesium oxysulfate whiskers further improves the material's tensile strength. An increase in tobacco stalks flour content in the rPP enhances the crystallization temperature and degree of crystallinity of the polymer. In addition, attributed to the existence of tobacco stalks flour hydrophilic and antibacterial ability, the water absorption of the hybrid composites was increased and obtained antibacterial ability. Hence, this study provides a new development idea for tobacco stalks r recycling and applications.
ABSTRACT
The value-added utilization of tobacco stalk lignin is the key to the development of tobacco stalk resources. However, the serious heterogeneity is the bottleneck for making full use of tobacco stalk lignin. Based on this, lignin was separated from tobacco stalk through hydrothermal assisted dilute alkali pretreatment. Subsequently, the tobacco stalk alkaline lignin was fractionated into five uniform lignin components by sequential solvent fractionation. Advanced spectral technologies (FT-IR, NMR, and GPC) were used to reveal the effects of hydrothermal assisted dilute alkali pretreatment and solvent fractionation on the structural features of tobacco stalk lignin. The lignin fractions extracted with n-butanol and ethanol had low molecular weight and high phenolic hydroxyl content, thus exhibiting superior chemical reactivity and antioxidant capacity. By contrast, the lignin fraction extracted with dioxane had high molecular weight and low reactivity, nevertheless, the high residual carbon rate made it suitable as a precursor for preparing carbon materials. In general, hydrothermal assisted dilute alkali pretreatment was proved to be an efficient method to separate lignin from tobacco stalk, and the application of sequential solvent fractionation to prepare lignin fractions with homogeneous structural features has specific application prospect.
ABSTRACT
The nicotine from tobacco stalk showed obvious inhibitory effect on the activity of cellulase and fermentability of microorganisms, which seriously hinders the utilization of tobacco stalk. Dilute sulfuric acid presoak of tobacco stalk was used to enhance the performance of instant catapult steam explosion (ICSE) for tobacco stalk pretreatment. The presoak was beneficial to break the recalcitrant structure of tobacco stalk, reduce nicotine content to relieve the inhibition on the activity of cellulase and metabolism of microorganisms, and promote the performance of enzymatic hydrolysis and ethanol fermentation. The optimized 0.8% sulfuric acid (w/w) presoak-integrated ICSE pretreatment resulted in 85.54% nicotine removal from tobacco stalk; meanwhile, the total sugar concentration from enzymatic hydrolysis of pretreated tobacco stalk increased from 33.40 to 53.81 g/L (the ratio of dry tobacco stalk to water was 1:8, w/w), ethanol concentration increased 103.36% from 5.95 to 12.10 g/L in flask, compared with separate ICSE pretreatment. Finally, the ethanol concentration achieved the highest 23.53 g/L in a 5-L fermenter with the ethanol yield from the glucose of tobacco stalk hydrolysate achieving 71.40% by increasing the solid loading of the tobacco stalk in the enzymatic hydrolysis process (the ratio of dry tobacco stalk to water was 1:4, w/w). These results achieved the expected purpose of efficient utilization of discarded tobacco stalk.
ABSTRACT
Large quantities of tobacco stalks residues are generated and discarded as crop waste or combusted directly every year. Thus, we need to find an appropriate way to dispose of this type of waste and recycle it. The conversion of biomass waste into electrode materials for supercapacitors is entirely in line with the concept of sustainability and green. In this paper, tobacco-stalk-based, porous activated carbon (TC) was successfully synthesized by high-temperature and high-pressure hydrothermal pre-carbonization and KOH activation. The synthesized TC had a high pore volume and a large surface area of 1875.5 m2 g-1, in which there were many mesopores and interconnected micro-/macropores. The electrochemical test demonstrated that TC-1 could reach a high specific capacitance of up to 356.4 F g-1 at a current density of 0.5 A g-1, which was carried in 6M KOH. Additionally, a symmetrical supercapacitor device was fabricated by using TC-1 as the electrode, which delivered a high energy density up to 10.4 Wh kg-1 at a power density of 300 W kg-1, and excellent long-term cycling stability (92.8% of the initial capacitance retention rate after 5000 cycles). Therefore, TC-1 is considered to be a promising candidate for high-performance supercapacitor electrode materials and is a good choice for converting tobacco biomass waste into a resource.
ABSTRACT
Hereon, tobacco stalk was deconstructed by lyophilization, ball-milling, ultrasound-assisted alkali extraction, hydrothermal pretreatment (HTP), and alkali presoaking, respectively, followed by dilute alkali cooking to both improve its enzymatic digestibility and isolate the hemicellulosic streams. It was found that a maximum cellulose saccharification rate of 93.5% was achieved from the integrated substrate by ball-milling and dilute alkali cooking, which was 4.4-fold higher than that from the raw material. Interestingly, in this case, 76.9% of hemicelluloses were simultaneously recovered during the integrated treatment. Structural determination indicated that the hemicelluloses released from tobacco stalk by dilute alkali cooking were mixed polysaccharides, and the (1 â 4)-linked ß-D-Xylp backbone branched with L-Araf units at O-2/O-3 and 4-O-Me-α-D-GlcpA units at O-2 of the xylose residues was the main structure. In comparison, ultrasound-assisted alkali extraction, ball-milling, and HTP favored the extraction of hemicelluloses with less branched structure and lower molecular weights in the following alkali cooking.
Subject(s)
Cellulose , Nicotiana , Hydrolysis , Molecular Weight , PolysaccharidesABSTRACT
Co-pyrolysis of tobacco stalk (TS) with different types of polymer wastes such as scrap tire (ST), polypropylene (PP) and polyvinyl chloride (PVC) was investigated. Thermogravimetric analyzer coupled with Fourier transform infrared spectrometer was carried out to examine the thermochemical properties, kinetics, and gas generation. The results of the co-pyrolysis showed a synergistic effect compared to the pyrolysis of the individual components. When using TS/ST co-pyrolysis, the reduction in char residue was about 6% (dry wt. basis) and the increase in organic gases exceeded 20%. It indicates that the addition of ST can increase both carbon conversion efficiency and volatiles yield. HCl from PVC underwent a complex physicochemical reaction with TS, increasing coke yield by 11-12% and inhibiting the gas release. In the main pyrolysis temperature range of ST, the activation energy is reduced by 40-80% by blending with TS; for PP this value is reduced by about 22%.
Subject(s)
Nicotiana , Polymers , Gases , Kinetics , Pyrolysis , ThermogravimetryABSTRACT
BACKGROUND: Tobacco stalk (TS), a major agricultural waste abundant in pectin, has resulted in concerns about the need for its reuse. The nicotine in TS is considered a chemical that is to\xic and hazardous to the environment. RESULTS: In this study, Bacillus tequilensis CAS-MEI-2-33 was isolated from cigar wrappers to produce alkaline pectinase using TS. Subsequently, the medium and fermentation conditions for the production of pectinase by B. tequilensis CAS-MEI-2-33 were optimized. The optimal fermentation period, pH of the initial fermentation medium, concentration of TS, and inoculum amount for B. tequilensis CAS-MEI-2-33 were 40 h, 40 g/L, 7.0, and 3%, respectively. Under optimal conditions, the pectinase activity was 1370 U/mL. Then, the enzymatic properties, such as the optimum pH, reaction temperature, temperature stability, and effects of metal ions, were studied. The optimal pH was determined to be 10.0, indicating that the enzyme was an alkaline pectinase. The optimal temperature was 40 °C, and pectinase activity was stable at 40 °C. The Ag+ metal ions were shown to remarkably promote enzyme activity. The pectinase was partly purified by ammonium sulfate precipitation, ion exchange chromatography, and Sephacryl S-100 chromatography. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and LC-MS/MS analyses were utilized to analyze the pectinase. CONCLUSIONS: This study provided a new alkaline pectinase candidate and a new strategy for the use of TS.
Subject(s)
Bacillus/enzymology , Bacterial Proteins/metabolism , Nicotiana/chemistry , Pectins/metabolism , Polygalacturonase/metabolism , Bacillus/classification , Bacillus/genetics , Enzyme Stability , Fermentation , Hydrogen-Ion Concentration , Industrial Microbiology/methods , Phylogeny , Temperature , Nicotiana/metabolism , Tobacco Products/microbiologyABSTRACT
Tobacco stalk, a common agricultural waste derived from the harvest of tobacco, caused serious environmental pollution in China. In this study, the performance of biomethane production and characteristics of four varieties of tobacco stalk were investigated for the first time. The results showed that the highest cumulative methane yield of 130.2 mL/g-VS was obtained from Nicotiana tabacum L., Yunyan114, which had lower lignin content than other varieties of tobacco stalk. Moreover, different kinetic models were used to describe the biomethane production process, and it was found that the modified Gompertz model was more suitable to simulate the anaerobic digestion (AD) of tobacco stalk. The findings of this study not only showed a feasible method for minimizing the pollution issues of tobacco stalk waste but also gave fundamental information for future AD application.
Subject(s)
Biofuels/analysis , Methane/biosynthesis , Nicotiana/chemistry , Plant Stems/chemistry , Waste Products , Anaerobiosis , China , Kinetics , Lignin/chemistryABSTRACT
In this study, biosorption of Cu2+ and Ni2+ ions to tobacco stalks was investigated under different operational conditions. The effects of the initial pH, ion concentrations, temperature, and duration of contact and adsorbent dosage were determined in the batch experiments. Chemical oxygen demand (COD) analyses were also performed to identify the possible negative effects of the sorbent throughout biosorption process. The sorption capacities of this sorbent were predicted by use of the equilibrium and kinetic models. Within the scope of kinetic study, it was observed that biosorption fitted to second-order pseudo kinetic rate expression. The highest R 2 value in isotherm studies was obtained from Freundlich isotherm (R 2 = 0.9940-0.9929) for the inlet concentration. FTIR, SEM, and EDX analyses were performed to investigate the surface characteristics and chemical structure of the biosorbent. Under optimum conditions, qe value for Cu2+ was determined as 7.18 mg/g and removal efficiency was 86.24%; qe value for Ni2+ was determined as 6.45 mg/g and removal efficient was 77.4%. Sorbent recovery process was also performed within the scope of this study with 0.1 M H2SO4, 0.1 M HCl, and distilled water. A significant decrease was observed in efficiency when the recovered sorbent was reused.
Subject(s)
Cations, Divalent/chemistry , Copper/chemistry , Models, Chemical , Nickel/chemistry , Water/chemistryABSTRACT
BACKGROUND: Tobacco stalk is one kind of abundant crop residues in China. The high lignification of tobacco stalk increases its reusing cost and the existing of nicotine will cause serious pollution. The biodegradation of lignocellulosic biomass has been demonstrated to be an environmental and economical approach for the utilization of plant stalk. Meanwhile, many nicotine-degrading microorganisms were found in nature. However, microorganisms which could degraded both nicotine and lignin haven't been reported. Therefore, it's imperative to find some suitable microorganisms to break down lignin and simultaneously remove nicotine in tobacco stalk. RESULTS: The nicotine in tobacco stalk could be degraded effectively by Trametes versicolor, Trametes hirsute and Phanerochaete chrysosporium. The nicotine content in tobacco stalk was lowered to below 500 mg/kg (a safe concentration to environment) after 10 days of fermentation with Phanerochaete chrysosporium and Trametes versicolor, and 15 days with Trametes hirsute. The degradation rate of lignin in the fermented tobacco stalk was 37.70, 51.56 and 53.75% with Trametes versicolor, Trametes hirsute and Phanerochaete chrysosporium, respectively. Meanwhile, 24.28% hemicellulose was degraded by Phanerochaete chrysosporium and 28.19% cellulose was removed by Trametes hirsute. Through the enzyme activity analysis, the main and highest ligninolytic enzymes produced by Phanerochaete chrysosporium, Trametes hirsute and Trametes versicolor were lignin peroxidase (88.62 U · L-1), manganese peroxidase (100.95 U · L-1) and laccase (745.65 U · L-1). Meanwhile, relatively high and stable cellulase activity was also detected during the fermentation with Phanerochaete chrysosporium, and the highest endoglucanase, exoglucanase and filter paper enzyme activities were 0.38 U · mL-1, 0.45 U · mL-1 and 0.35U · mL-1, respectively. Moreover, the products in the fermentation of tobacco stalk with P. chrysosporium were identified with GC-MS, besides the chemicals produced in the degradation of lignin and nicotine, some small molecular valuable chemicals and fatty acid were also detected. CONCLUSIONS: Our study developed a new method for the degradation and detoxification of tobacco stalk by fermentation with white rot fungi Phanerochaete chrysosporium and Trametes hirsute. The different oxidative enzymes and chemical products detected during the degradation indicated a possible pathway for the utilization of tobacco stalk.
Subject(s)
Lignin/metabolism , Nicotiana/microbiology , Nicotine/metabolism , Phanerochaete/metabolism , Plant Stems/chemistry , Plant Stems/microbiology , Biodegradation, Environmental , Environmental Pollutants/isolation & purification , Environmental Pollutants/metabolism , Nicotine/chemistry , Nicotine/isolation & purification , Nicotiana/chemistryABSTRACT
Tobacco stalks are an abundant biomass resource which are otherwise treated as waste. In this work, the effect of hydrothermal carbonization temperature and time on the structures, chemical compositions and combustion characteristics of hydrochars obtained from tobacco stalks were evaluated. The carbon content, higher heating value, and energy yield increased with accompanying decrease in hydrogen and oxygen contents with the increase of treatment temperature and time. The evolution of the H/C and O/C atomic ratios indicated dehydration and devolatilization processes occurred during hydrothermal carbonization. The weight loss, combustion range and characteristic temperatures of tobacco stalks were significantly modified after hydrothermal carbonization, resulting in higher ignition temperatures and higher energy density. The kinetics model, Coats-Redfern method revealed the activation energy of hydrochars in zone 2 and 3 were among 43.7-74.8kJ/mol and 46.7-85.8kJ/mol, respectively. Our results show that hydrothermal carbonization reaction can facilitate transforming tobacco stalks into energy-rich solid fuel.