Bipolar Supercapacitive Performance of N-Containing Carbon Materials Derived from Covalent Triazine-Based Framework.

The search for new electrode materials for bipolar-supercapacitor performance is the intention of numerous research in the area of functional framework materials. Among various electrode materials, covalent triazine-based frameworks (CTFs) are in the spotlight drawing much attention as potential electrode material for energy storage. Herein, we present the synthesis of nitrogen-functionalized CTFs marked as CTF-Py-600 and CTF-Py-700 with high nitrogen content (18% and 14%, respectively) for supercapacitor application by applying 2,6-dicyanopyridine monomer via the polymerization reaction under ionothermal condition. The BET surface area of these materials are in the range of 940-1999 m2g-1. CTF-Py-700 demonstrates outstanding electrochemical performance in both potential windows. At the negative potential window, it exhibits a higher specific capacitance of 435 F g-1 (at 1 A g-1) compared to the positive potential window, where it shows a specific capacitance of 306 F g-1 (at 1 A g-1) owing to the synergistic existence of its large surface area (1999 m2g-1) and high nitrogen content (14%) with inherent microporosity. Remarkable cycling stability without noticeable degradation of specific capacitance after 15000 cycles was recorded for CTF-Py-700. This suggests that the nitrogen-functionalized CTFs are going to be a highly demanded electrode material for electrochemical energy storage applications.

Efficient photocatalytic oxidative coupling of amines under visible light using a trioporphyrins-based covalent triazine framework.

Porphyrins-based porous organic polymers were widely used in photocatalytic oxidation under visible light owing to their superiority in the activation of oxygen. In contrast, the efficiency is usually limited due to the fast recombination and slow electron transfer. Herein, we report the use of a trioporphyrins-based covalent triazine framework (Por-CTF) as visible-light-active photocatalyst for the coupling oxidative of amines to imines at room temperature. By incorporating the π-conjugated porphyrin building block led to the enhanced electron transport between molecules, and the extended recombination time of excited electrons. The photocatalytic efficiency of Por-CTF is superior to that of polymer in absence of triazine framework (POP-TSP), which was prepared by radical polymerization using tetra-(4-vinylphenyl) porphyrin as monomer. Por-CTF catalyst presented excellent efficiency for various primary amines and stability. This work provides a reasonable guidance of catalyst molecular structure design for enhancing efficiency in the photocatalytic oxidation.

Unprecedented Photocatalytic Hydrogen Peroxide Production via Covalent Triazine Frameworks Constructed from Fused Building Blocks.

Covalent organic frameworks (COFs) have garnered attention for their potential in photocatalytic hydrogen peroxide (H2O2) production. However, their photocatalytic efficiency is impeded by insufficient exciton dissociation and charge carrier transport. Constructing COFs with superior planarity is an effective way to enhance the π-conjugation degree and facilitate electron-hole separation. Nonetheless, the conventional linear linkers of COFs inevitably introduce torsional strain that disrupts coplanarity.Herein, we address this issue by introducing inherently coplanar triazine rings as linkers and fused building blocks as monomers to create covalent triazine frameworks (fused CTFs) with superior coplanarity. Both experimental and theoretical calculations confirm that CTFs constructed from fused building blocks significantly enhance the electron-hole separation efficiency and improve the photocatalytic performance, compared to the CTFs constructed with non-fused building blocks. The frontier molecular orbitals and electrostatic potentials (ESP) revealed that the ORR is preferentially facilitated by the triazine rings, with the WOR likely occurring at the thiophene-containing moiety. Remarkably, CTF-BTT achieved an exceptional H2O2 production rate of 74956 µmol g-1 h-1 when employing 10% benzyl alcohol (V/V) as a sacrificial agent in an O2-saturated atmosphere, surpassing existing photocatalysts by nearly an order of magnitude.

Covalent Triazine-Based Frameworks with Ru-tda Based Catalyst Anchored via Coordination Bond for Photoinduced Water Oxidation.

Light-induced water splitting (hν-WS) for the production of hydrogen as a solar fuel is considered a promising sustainable strategy for the replacement of fossil fuels. An efficient system for hν-WS involves a photoactive material that, upon shining light, is capable of separating and transferring charges to catalysts for the hydrogen and oxygen evolution processes. Covalent triazine-based frameworks (CTFs) represent an interesting class of 2D organic light-absorbing materials that have recently emerged thanks to their tunable structural, optical and morphological properties. Typically, catalysts (Cat) are metallic nanoparticles generated in situ after photoelectroreduction of metal precursors or directly drop-casted on top of the CTF material to generate Cat-CTF assemblies. In this work, the synthesis, characterization and photocatalytic performance of a novel hybrid material, Ru-CTF, is reported, based on a CTF structure featuring dangling pyridyl groups that allow the Ru-tda (tda is [2,2':6',2'"-terpyridine]-6,6'"-dicarboxylic acid) water oxidation catalyst (WOC) unit to coordinate via covalent bond. The Ru-CTF molecular hybrid material can carry out the light-induced water oxidation reaction efficiently at neutral pH, reaching values of maximum TOF of 17 h-1 and TONs in the range of 220 using sodium persulfate as a sacrificial electron acceptor.

Rational selection of 4,4',4″-(1,3,5-triazine-2,4,6-triyl) trianiline-based covalent organic framework as adsorbent for effective co-extraction of aflatoxins, zearalenone and its metabolites from food and biological samples.

Aflatoxins, zearalenone and its metabolites, as representative hazard mycotoxins cause adverse effects on food safety and human health. Developing a sensitive and reliable extraction and detection method is of great importance for monitoring their residue and exposure levels. In contrast to traditional trial-and-error selection steps, 4,4',4″-(1,3,5-triazine-2,4,6-triyl) trianiline covalent-bonding with 2,5-dihydroxyterephthalaldehyde, namely TAPT-OH-COF was screened as a potential adsorbent utilizing density functional theory calculations prior to the synthesis procedure. After experimental verification, magnetic TAPT-OH-COFs were prepared, characterized and applied for the extraction of aflatoxins, zearalenone and its metabolites from food and biological samples, coupled with high-performance liquid chromatography tandem mass spectrophy detection. Under the optimal conditions, the developed method exhibited low limits of quantification (0.05-0.50 µg/kg), satisfactory recoveries (75.8 %-110.9 %) and good precision with intraday and interday relative standard deviations (RSDs) not exceeding 12.2 %. This study may provide great potential for the selection of candidate adsorbents for multi-mycotoxins extraction from complex samples.

Suppressing hydrogen evolution and promoting dendrite free zinc deposition by fluorinated triazine framework towards robust aqueous zinc ion batteries.

Aqueous zinc-ion batteries (AZIBs) have become a research hotspot, but the inevitable zinc dendrites and parasitic reactions in the zinc anode seriously hinder their further development. In this study, three covalent triazine frameworks (DCPY-CTF, CTF-1 and FCTF) have been synthesized and used as artificial protective coatings, in which the fluorinated triazine framework (FCTF) increases the zinc-philic site, thus better promoting dendritic free zinc deposition and inhibiting hydrogen evolution reactions. Excitingly, both experimental results and theoretical calculations indicate that the FCTF interface adjusts the deposition of Zn2+ along the (002) plane, effectively alleviating the formation of zinc dendrites. As expected, Zn@FCTF symmetric cells exhibit cycling stability of over 4000 h (0.25 mA cm-2), meanwhile Zn@FCTF//NHVO full cells provide a high specific capacity of 280 mAh/g at 1.0 A/g, which are superior to those of bare Zn anode. This work provides new insights for suppressing hydrogen evolution and promoting dendrite-free zinc deposition to construct highly stable and reversible AZIBs.

Engineering Polyheptazine and Polytriazine Imides for Photocatalysis.

As organic semiconductor materials gain increasing prominence in the realm of photocatalysis, two carbon-nitrogen materials, poly (heptazine imide) (PHI) and poly (triazine imide) (PTI), have garnered extensive attention and applications owing to their unique structure properties. This review elaborates on the distinctive physical and chemical features of PHI and PTI, emphasizing their formation mechanisms and the ensuing properties. Furthermore, it elucidates the intricate correlation between the energy band structures and various photocatalytic reactions. Additionally, the review outlines the primary synthetic strategies for constructing PHI and PTI, along with characterization techniques for their identification. It also summarizes the primary strategies for enhancing the photocatalytic performance of PHI and PTI, whose advantages in various photocatalytic applications are discussed. Finally, it highlights the promising prospects and challenges pertaining to PHI and PTI as photocatalysts.

Crystal structures, phase transition, and Hirshfeld surface analyses of the bromide and chloride congeners of aqua[2,4,6-tris(pyridin-4-yl)-1,3,5-triazine]zinc(II) halide.

During the course of exploring crystallization conditions in generating metal-organic frameworks (MOFs) for use in the crystalline sponge method, two discrete metal-organic complexes, namely, aqua[2,4,6-tris(pyridin-4-yl)-1,3,5-triazine]zinc(II) bromide, [Zn(C18H12N6)(H2O)]Br2, and aqua[2,4,6-tris(pyridin-4-yl)-1,3,5-triazine]zinc(II) chloride, [Zn(C18H12N6)(H2O)]Cl2, were encountered. Structures in the orthorhombic space group Pnma (No. 62) for the bromide congener at 299 K and the chloride congener at 100 K were obtained. A phase transition for the bromide congener occurred upon cooling from 299 to 100 K, yielding a crystal polymorph with four domains that exhibits monoclinic P21/m space-group symmetry (No. 11), which arises from conformational changes. The main intramolecular contacts that contribute to the crystal packing in all observed structures are H...H, Halide...H/H...Halide, C...H/H...C, and N...H/H...N. Intramolecular hydrogen bonding between the Zn-bound water and non-Zn-bound pyridyl N atoms is a prominent feature within the three-dimensional networks. Aromatic π-stacking between the non-Zn-bound pyridine rings and contacts involving the halide ligands further stabilize the crystal packing.

Highly Selective SO2 Capture by Triazine-Functionalized Triphenylamine-Based Nanoporous Organic Polymers.

The emissions of sulfur dioxide (SO2) from combustion exhaust gases pose significant risks to public health and the environment due to their harmful effects. Therefore, the development of highly efficient adsorbent polymers capable of capturing SO2 with high capacity and selectivity has emerged as a critical challenge in recent years. However, existing polymers often exhibit poor SO2/CO2 and SO2/N2 selectivity. Herein, we report two triazine-functionalized triphenylamine-based nanoporous organic polymers (ANOP-6 and ANOP-7) that demonstrate both good SO2 uptake and high SO2/CO2 and SO2/N2 selectivity. These polymers were synthesized through cost-effective Friedel-Crafts reactions using cyanuric chloride, 3,6-diphenylaminecarbazole, and 2,2',7,7'-tetrakis(diphenylamino)-9,9'-spirobifluorene. The resultant ANOPs are composed of triazine and triphenylamine units and feature an ultramicroporous structure. Remarkably, ANOPs exhibit impressive adsorption capacities for SO2, with uptakes of approximately 3.31-3.72 mmol·g-1 at 0.1 bar, increasing to 9.52-9.94 mmol·g-1 at 1 bar. The static adsorption isotherms effectively illustrate the ability of ANOPs to separate SO2 from SO2/CO2 and SO2/N2 mixtures. At 298 K and 1 bar, ANOP-6 shows outstanding selectivity toward SO2/CO2 (248) and SO2/N2 (13146), surpassing all previously reported triazine-based nanoporous organic polymers. Additionally, dynamic breakthrough tests demonstrate the superior separation properties of ANOPs for SO2 from an SO2/CO2/N2 mixture. ANOPs exhibit a breakthrough time of 73.1 min·g-1 and a saturated SO2 capacity of 0.53 mmol·g-1. These results highlight the exceptional adsorption properties of ANOPs for SO2, indicating their promising potential for the highly efficient capture of SO2 from flue gas.

Construction of Covalent Triazine Frameworks with Electronic Donor-Acceptor System for Efficient Photocatalytic C-H Hydroxylation of Imidazole[1,2-α]pyridine Derivatives.

Covalent triazine frameworks (CTFs) are promising heterogeneous photocatalyst candidates owing to their excellent stability, conjugacy, and tunability. In this study, a series of CTFs decorated with different substituents (H, MeO, and F) were synthesised and utilised as photocatalysts for C-H activation reactions. The corresponding optoelectronic properties could be precisely regulated by the electronic effects of different substituents in the nanopore channels of the CTFs; these CTFs were effective photocatalysts for C-H activation in organic synthesis due to their unique structures and optoelectronic properties. Methoxy-substituted CTF (MeO-CTF) exhibited extraordinary catalytic performance and reusability in C-H functionalization by constructing an electronic donor-acceptor system, achieving the highest yield in the photocatalytic C3-H hydroxylation of 2-phenylimidazole[1,2-α]pyridine. This strategy provides a new scaffold for the rational design of CTFs as efficient photocatalysts for organic synthesis.

Occurrence, sources and transport of triazine herbicides in the Antarctic marginal seas.

The extensively applied triazine herbicides are easily transported by ocean currents over long distances. This study analyzed ten triazine herbicides in the Antarctic marginal seas and the Southern Indian Ocean during the austral summer for the first time, addressing their largely unexplored behavior in remote marine environments. The total triazine herbicides showed great spatial heterogeneity, with a range of 20-790 pg/L and an average of 31 ± 66 pg/L. The waterborne transport of triazine herbicides in the Antarctic was affected by hydrological processes, especially the blocking and accumulation effect of the polar front. Variations in sea ice extent and temperature were also important influencing factors, resulting in elevated triazine herbicides in surface seawater of East Antarctica, but reduced levels in West Antarctica. Furthermore, the source apportionment results indicated that approximately 55 % of the herbicides originated from sugarcane cultivation, 28 % from algaecide use, and 16 % from corn and sorghum farming.

Efficient integration of covalent triazine frameworks (CTFs) for augmented photocatalytic efficacy: A review of synthesis, strategies, and applications.

Heterogeneous photocatalysis emerges as an exceptionally appealing technological avenue for the direct capture, conversion, and storage of renewable solar energy, facilitating the generation of sustainable and ecologically benign solar fuels and a spectrum of other pertinent applications. Heterogeneous nanocomposites, incorporating Covalent Triazine Frameworks (CTFs), exhibit a wide-ranging spectrum of light absorption, well-suited electronic band structures, rapid charge carrier mobility, ample resource availability, commendable chemical robustness, and straightforward synthetic routes. These attributes collectively position them as highly promising photocatalysts with applicability in diverse fields, including but not limited to the production of photocatalytic solar fuels and the decomposition of environmental contaminants. As the field of photocatalysis through the hybridization of CTFs undergoes rapid expansion, there is a pressing and substantive need for a systematic retrospective analysis and forward-looking evaluation to elucidate pathways for enhancing performance. This comprehensive review commences by directing attention to diverse synthetic methodologies for the creation of composite materials. And then it delves into a thorough exploration of strategies geared towards augmenting performance, encompassing the introduction of electron donor-acceptor (D-A) units, heteroatom doping, defect Engineering, architecture of Heterojunction and optimization of morphology. Following this, it systematically elucidates applications primarily centered around the efficient generation of photocatalytic hydrogen, reduction of carbon dioxide through photocatalysis, and the degradation of organic pollutants. Ultimately, the discourse turns towards unresolved challenges and the prospects for further advancement, offering valuable guidance for the potent harnessing of CTFs in high-efficiency photocatalytic processes.

Photo-Clickable Triazine-Trione Thermosets as Promising 3D Scaffolds for Tissue Engineering Applications.

There is an overwhelming demand for new scaffolding materials for tissue engineering (TE) purposes. Polymeric scaffolds have been explored as TE materials; however, their high glass transition state (Tg) limits their applicability. In this study, a novel materials platform for fabricating TE scaffolds is proposed based on solvent-free two-component heterocyclic triazine-trione (TATO) formulations, which cure at room temperature via thiol-ene/yne photochemistry. Three ester-containing thermosets, TATO-1, TATO-2, and TATO-3, are used for the fabrication of TE scaffolds including rigid discs, elastic films, microporous sponges, and 3D printed objects. After 14 days' incubation the materials covered a wide range of properties, from the soft TATO-2 having a compression modulus of 19.3 MPa and a Tg of 30.4 °C to the hard TATO-3 having a compression modulus of 411 MPa and a Tg of 62.5 °C. All materials exhibit micro- and nano-surface morphologies suited for bone tissue engineering, and in vitro studies found them all to be cytocompatible, supporting fast cell proliferation while minimizing cell apoptosis and necrosis. Moreover, bone marrow-derived mesenchymal stem cells on the surface of the materials are successfully differentiated into osteoblasts, adipocytes, and neuronal cells, underlining the broad potential for the biofabrication of TATO materials for TE clinical applications.

A Dual-Active Covalent Triazine Framework Film for Efficient Visible-Light-Driven Hydrogen Peroxide Production.

Photocatalytic hydrogen peroxide production from water and oxygen offers a clean and sustainable alternative to the conventional energy-intensive anthraquinone oxidation method. Compared to powdered covalent triazine frameworks (CTFs), the film morphology of CTFs provides better connectivity in 2D, yielding several advantages: more efficient connections between active sites, reduced electron-hole pair recombination, increased resistance to superoxide radical induced corrosion, and decreased light scattering. Leveraging these benefits, it has incorporated dual active sites for both the oxygen reduction reaction (ORR) and the water oxidation reaction (WOR) into a CTF film system. This dual-active CTF film demonstrated an exceptional hydrogen peroxide production rate of 19 460 µmol h⁻¹ m⁻2 after 1 h and 17 830 µmol h⁻¹ m⁻2 after 5 h under visible light irradiation (≥420 nm) without the need for sacrificial agents.

Green Synthesis of the Triazine Derivatives and their Application for the Benign Electrocatalytic Reaction of Nitrate Reduction to Ammonia.

This work uses green sustainable reactions twice. Firstly, it is microwave synthesis: 2,4,6-tribiphenyl-4-yl-1,3,5-triazine and similar compounds were prepared in a closed microwave reactor in n-octane by the Friedel-Crafts reaction. Second, a hybrid electrocatalyst for the highly demanded electrochemical reaction of nitrate reduction to ammonia (NO3RR) was prepared based on this material. This reaction has great potential to replace the energy-intensive Haber-Bosch process, and in addition, has independent value for the elimination of nitrate contamination of water resources. As shown in the work, microwave synthesis is an eco-friendly method for the synthesis of complex organic compounds; fast, selective and with a high yield of the target product. The electrocatalyst deposited on the graphite electrode consisted of a layer of 2,4,6-tribiphenyl-4-yl-1,3,5-triazine and related compounds coated with cobalt oxide. The hybrid catalyst was firmly retained on the graphite electrode during NO3RR and the material showed impressive stability with almost no decrease in catalytic activity even after the fifth cycle. Both 2,4,6-tribiphenyl-4-yl-1,3,5-triazine and the catalyst based on this substance were characterized by SEM, XPS, XRD, UV-vis spectra, cyclic (and linear) voltammetry, and chronoamperometry. This work can serve as a starting point for the development of stable and durable electrocatalysts for NO3RR using triazine derivatives.

Tris(triazolo)triazine-Based Covalent Organic Frameworks for Efficiently Photocatalytic Hydrogen Peroxide Production.

Two-dimensional covalent organic frameworks (2D-COFs) have recently emerged as fascinating scaffolds for solar-to-chemical energy conversion because of their customizable structures and functionalities. Herein, two tris(triazolo)triazine-based COF materials (namely COF-JLU51 and COF-JLU52) featuring large surface area, high crystallinity, excellent stability and photoelectric properties were designed and constructed for the first time. Remarkably, COF-JLU51 gave an outstanding H2O2 production rate of over 4200 µmol g-1 h-1 with excellent reusability in pure water and O2 under one standard sun light, that higher than its isomorphic COF-JLU52 and most of the reported metal-free materials, owing to its superior generation, separation and transport of photogenerated carriers. Experimental and theoretical researches prove that the photocatalytic process undergoes a combination of indirect 2e- O2 reduction reaction (ORR) and 4e- H2O oxidation reaction (WOR). Specifically, an ultrahigh yield of 7624.7 µmol g-1 h-1 with apparent quantum yield of 18.2 % for COF-JLU52 was achieved in a 1 : 1 ratio of benzyl alcohol and water system. This finding contributes novel, nitrogen-rich and high-quality tris(triazolo)triazine-based COF materials, and also designate their bright future in photocatalytic solar transformations.

Benzo(b)fluoranthene and benzo(k)fluoranthene removal by microalgae in the presence of triazine herbicides: Matrix solid-phase dispersion and solid-phase extraction (MSPD/SPE) for HPLC-UV analysis of the different culture components.

Over the last decade, human activities in the industrial and agricultural sectors have significantly increased the concentration of persistent and harmful pollutants in aquatic ecosystems. The use of microorganisms is a green strategy for the bio-removal of certain contaminants. However, other pollutants in the same ecosystems can reduce their degrading activity and even affect their survival. Therefore, this study aimed to evaluate the efficiency of benzo(b)fluoranthene (BbF) and benzo(k)fluoranthene (BkF) removal by Selenastrum capricornutum in the presence of triazine herbicides, compounds mainly used in broadleaf weeds. The interest of this work focused on identifying in which of the microalgal components the degrading activity is best evidenced and affected. For this purpose, the use of solid-phase extraction (SPE) and matrix solid-phase dispersion (MSPD) extraction procedures and HPLC-UV analysis allowed the BbF and BkF trace quantification in biomass, liquid medium, and cell lysate separately from cultures exposed to these polycyclic aromatic hydrocarbons (PAHs) alone or with herbicides. The recovery percentages were between 78 and 94 %, good linearity (r2 ≈ 0.99), precision values measured as RSD < 15 %, and limits of detection (LOQs) at levels of ng mL-1 and ng mg-1 were obtained. The individual PAH amounts measured in the components of microalgae cultures show similar removal kinetics (removal percentages: 82-89 %). Likewise, the analysis demonstrated that the removal of PAHs is not affected in the presence of triazine herbicides (atrazine and cyanazine) and with similar removal percentages (79-86 %) compared to those cultures exposed to individual PAHs (74-83 %). These results support the possible real-world applications of PAH removal by extracts from S. capricornutum in aquatic environments contaminated with PAHs and near agriculture areas where triazine herbicides are used.

New triazinephosphonate dopants for Nafion proton exchange membranes (PEM).

A new paradigm for energy is underway demanding decarbonized energy systems. Some of them rely on emerging electrochemical devices, crucial in hydrogen technologies, including fuel cells, CO2 and water electrolysers, whose applications and performances depend on key components such as their separators/ion-exchange membranes. The most studied and already commercialized Nafion membrane shows great chemical stability, but its water content limits its high proton conduction to a limited range of operating temperatures. Here, we report the synthesis of a new series of triazinephosphonate derivatives and their use as dopants in the preparation of new modified Nafion membranes. The triazinephosphonate derivatives were prepared by substitution of chlorine atoms in cyanuric chloride. Diverse conditions were used to obtain the trisubstituted (4-hydroxyphenyl)triazinephosphonate derivatives and the (4-aminophenyl)triazinephosphonate derivatives, but with these amino counterparts, only the disubstituted compounds were obtained. The new modified Nafion membranes were prepared by casting incorporation of the synthesized 1,3,5-triazinephosphonate (TPs) derivatives. The evaluation of the proton conduction properties of the new membranes and relative humidity (RH) conditions and at 60 °C, showed that they present higher proton conductivities than the prepared Nafion membrane and similar or better proton conductivities than commercial Nafion N115, in the same experimental conditions. The Nafion-doped membrane with compound TP2 with a 1.0 wt % loading showed the highest proton conductivity with 84 mS·cm-1.

Pollution level and ecological risk assessment of triazine herbicides in Laizhou Bay and derivation of seawater quality criteria.

Triazine herbicides are widely used in agriculture and have become common pollutants in marine environments. However, the spatiotemporal distribution characteristics and water quality criteria (WQC) of triazine herbicides are still unclear. This study found that triazine herbicides had a high detection rate of 100 % in surface seawater of Laizhou Bay, China, with average concentrations of 217.61, 225.13, 21.97, and 1296.72 ng/L in March, May, August, and October, respectively. Moreover, estuaries were important sources, and especially the Yellow River estuary exhibited the highest concentrations of 16,115.86 ng/L in October. The 10 triazine herbicides were detected in the sediments of Laizhou Bay, with a concentration ranging from 0.14-1.68 µg/kg. Atrazine and prometryn accounted for 33.41 %-59.10 % and 28.93 %-50.06 % of the total triazine herbicides in the seawater, and prometryn had the highest proportion (63.50 %) in the sediments. Correlation analysis revealed that triazine herbicides led to the loss of plankton biodiversity, which further decreased the dissolved oxygen. In addition, this study collected 45 acute toxicity data and 22 chronic toxicity data of atrazine, 16 acute toxicity data of prometryn, and supplemented with toxicity experiments of prometryn on marine organisms. Based on the toxicity database, the WQCs of atrazine and prometryn were derived using species sensitivity distribution. The overall risk probability of atrazine and prometryn were both less than 1.75 % in the Laizhou Bay, indicating an acceptable risk. This study not only clarified the pollution status and ecological risk of triazine herbicides, but also provided scientific basis for their environmental management standards.

Understanding electron structure of covalent triazine framework embraced with gold nanoparticles for nitrogen reduction to ammonia.

Regulating the electron structure and precise loading sites of metal-active sites within the highly conjugated and porous covalent-triazine frameworks (CTFs) is essential to promoting the nitrogen reduction reaction (NRR) performance for electrocatalytic ammonia (NH3) synthesis under ambient conditions. Herein, experimental method and density functional theory (DFT) calculations were conducted to deeply probe the effect on NRR of the modulation of modulating the electron structure and the loading site of gold nanoparticles (Au NPs) in a two-dimensional (2D) CTF. 2D CTF synthesized using melem and hexaketocyclohexane octahydrate as building blocks (denoted as M-HCO-CTF) served as a robust scaffold for loading Au NPs to form an M-HCO-CTF@AuNP hybrid. DFT results uncovered that well-defined Au sites with tunable local structure were the active site for driving the NRR, which can significantly suppress the conversion of H+ into *H adsorption and enhance the nitrogen (N2) adsorption/activation. The overlapped Au (3d) and *N2 (2p) orbitals lowered the free energy of the rate-determining step to form *NNH, thereby accelerating the NRR. The M-HCO-CTF@AuNPs electrocatalyst exhibited a large NH3 yield rate of 66.3 µg h-1 mg-1cat. and a high Faraday efficiency of 31.4 % at - 0.2 V versus reversible hydrogen electrode in 0.1 M HCl, superior to most reported CTF-based ones. This work can provide deep insights into the modulation of the electron structure of metal atoms within a porous organic framework for artificial NH3 synthesis through NRR.