Easy-to-Use MOX-Based VOC Sensors for Efficient Indoor Air Quality Monitoring.

This research paper presents a case study on the application of Metal Oxide Semiconductor (MOX)-based VOC/TVOC sensors for indoor air quality (IAQ) monitoring. This study focuses on the ease of use and the practical benefits of these sensors, drawing insights from measurements conducted in a university laboratory setting. The investigation showcases the straightforward integration of MOX-based sensors into existing IAQ monitoring systems, highlighting their user-friendly features and the ability to provide precise and real-time information on volatile organic compound concentrations. Emphasizing ease of installation, minimal maintenance, and immediate data accessibility, this paper demonstrates the practicality of incorporating MOX-based sensors for efficient IAQ management. The findings contribute to the broader understanding of MOX sensor capabilities, providing valuable insights for those seeking straightforward and effective solutions for indoor air quality monitoring. This case study outlines the feasibility and benefits of utilizing MOX-based sensors in various environments, offering a promising avenue for the widespread adoption of user-friendly technologies in IAQ management.

Breath Sensor Technology for the Use in Mechanical Lung Ventilation Equipment for Monitoring Critically Ill Patients.

BACKGROUND: The need for mechanical lung ventilation is common in critically ill patients, either with COVID-19 infection or due to other causes. Monitoring of patients being ventilated is essential for timely and improved management. We here propose the use of a novel breath volatile organic compound sensor technology to be used in a mechanical lung ventilation machine for this purpose; the technology was evaluated in critically ill COVID-19 patients on mechanical lung ventilation. METHODS: Based on the consistency results of our study data, the breath sensor device with metal oxide gas sensors and environment-controlling sensors was mounted on the ventilation exhaust port of the ventilation machine; this allowed to ensure additional safety since the device was placed outside the contour between the patient and equipment. RESULTS: The sensors allowed stable registration of the signals for up to several weeks for 10 patients in total, depending on the storage amount; a proportion of patients were intubated or received tracheostoma during the evaluation period. Future studies are on the way to correlate sensor readings to other parameters characterizing the severity of the patient condition and outcome. CONCLUSIONS: We suppose that such technology will allow patient monitoring in real-time for timely identification of deterioration, potentially requiring some change of management. The obtained results are preliminary and further studies are needed to examine their clinical significance.

Sustainable plant polyesters as substrates for optical gas sensors.

The fast and non-invasive detection of odors and volatile organic compounds (VOCs) by gas sensors and electronic noses is a growing field of interest, mostly due to a large scope of potential applications. Additional drivers for the expansion of the field include the development of alternative and sustainable sensing materials. The discovery that isolated cross-linked polymeric structures of suberin spontaneously self-assemble as a film inspired us to develop new sensing composite materials consisting of suberin and a liquid crystal (LC). Due to their stimuli-responsive and optically active nature, liquid crystals are interesting probes in gas sensing. Herein, we report the isolation and the chemical characterization of two suberin types (from cork and from potato peels) resorting to analyses of gas chromatography-mass spectrometry (GC-MS), solution nuclear magnetic resonance (NMR), and X-ray photoelectron spectroscopy (XPS). The collected data highlighted their compositional and structural differences. Cork suberin showed a higher proportion of longer aliphatic constituents and is more esterified than potato suberin. Accordingly, when casted it formed films with larger surface irregularities and a higher C/O ratio. When either type of suberin was combined with the liquid crystal 5CB, the ensuing hybrid materials showed distinctive morphological and sensing properties towards a set of 12 VOCs (comprising heptane, hexane, chloroform, toluene, dichlormethane, diethylether, ethyl acetate, acetonitrile, acetone, ethanol, methanol, and acetic acid). The optical responses generated by the materials are reversible and reproducible, showing stability for 3 weeks. The individual VOC-sensing responses of the two hybrid materials are discussed taking as basis the chemistry of each suberin type. A support vector machines (SVM) algorithm based on the features of the optical responses was implemented to assess the VOC identification ability of the materials, revealing that the two distinct suberin-based sensors complement each other, since they selectively identify distinct VOCs or VOC groups. It is expected that such new environmentally-friendly gas sensing materials derived from natural diversity can be combined in arrays to enlarge selectivity and sensing capacity.

Insights in the Application of Stoichiometric and Non-Stoichiometric Titanium Oxides for the Design of Sensors for the Determination of Gases and VOCs (TiO2-x and TinO2n-1 vs. TiO2).

In this review article, attention is paid towards the formation of various nanostructured stoichiometric titanium dioxide (TiO2), non-stoichiometric titanium oxide (TiO2-x) and Magnéli phase (TinO2n-1)-based layers, which are suitable for the application in gas and volatile organic compound (VOC) sensors. Some aspects related to variation of sensitivity and selectivity of titanium oxide-based sensors are critically overviewed and discussed. The most promising titanium oxide-based hetero- and nano-structures are outlined. Recent research and many recently available reviews on TiO2-based sensors and some TiO2 synthesis methods are discussed. Some promising directions for the development of TiO2-based sensors, especially those that are capable to operate at relatively low temperatures, are outlined. The applicability of non-stoichiometric titanium oxides in the development of gas and VOC sensors is foreseen and transitions between various titanium oxide states are discussed. The presence of non-stoichiometric titanium oxide and Magnéli phase (TinO2n-1)-based layers in 'self-heating' sensors is predicted, and the advantages and limitations of 'self-heating' gas and VOC sensors, based on TiO2 and TiO2-x/TiO2 heterostructures, are discussed.

Using Gas-Phase Air Quality Sensors to Disentangle Potential Sources in a Los Angeles Neighborhood.

In the late summer of 2016, our team deployed a network of low-cost air quality sensing systems in partnership with community-based organizations in a neighborhood in South Los Angeles, California. Residents of this community were concerned about possible emissions from local oil and gas activity, however in addition to these potential emissions, the neighborhood is also subject to a complex mixture of pollutants from other nearby sources including major highways. For this deployment, metal-oxide VOC sensors were quantified to provide methane (CH4) and total non-methane hydrocarbon (TNMHCs) concentration estimates. This data along with other sensor signals, meteorological data, and community member observations was used to examine the composition and possible origins of observed emissions. The sensor network displayed expected environmental trends and highlighted short-term elevations in CH4 and/or TNMHCs, which we were then able to investigate more closely. The results indicated that sources of both combusted and volatilized hydrocarbons were likely affecting air quality throughout the community, including near the site of the local oil and gas activity. This deployment may serve as a model for how multi-sensor systems deployed in networks can be leveraged to better understand sources in complex areas, potentially supporting future community-based air quality research.

Tuning ZnO Sensors Reactivity toward Volatile Organic Compounds via Ag Doping and Nanoparticle Functionalization.

Nanomaterials for highly selective and sensitive sensors toward specific gas molecules of volatile organic compounds (VOCs) are most important in developing new-generation of detector devices, for example, for biomarkers of diseases as well as for continuous air quality monitoring. Here, we present an innovative preparation approach for engineering sensors, which allow for full control of the dopant concentrations and the nanoparticles functionalization of columnar material surfaces. The main outcome of this powerful design concept lies in fine-tuning the reactivity of the sensor surfaces toward the VOCs of interest. First, nanocolumnar and well-distributed Ag-doped zinc oxide (ZnO:Ag) thin films are synthesized from chemical solution, and, at a second stage, noble nanoparticles of the required size are deposited using a gas aggregation source, ensuring that no percolating paths are formed between them. Typical samples that were investigated are Ag-doped and Ag nanoparticle-functionalized ZnO:Ag nanocolumnar films. The highest responses to VOCs, in particular to (CH3)2CHOH, were obtained at a low operating temperature (250 °C) for the samples synergistically enhanced with dopants and nanoparticles simultaneously. In addition, the response times, particularly the recovery times, are greatly reduced for the fully modified nanocolumnar thin films for a wide range of operating temperatures. The adsorption of propanol, acetone, methane, and hydrogen at various surface sites of the Ag-doped Ag8/ZnO(0001) surface has been examined with the density functional theory (DFT) calculations to understand the preference for organic compounds and to confirm experimental results. The response of the synergistically enhanced sensors to gas molecules containing certain functional groups is in excellent agreement with density functional theory calculations performed in this work too. This new fabrication strategy can underpin the next generation of advanced materials for gas sensing applications and prevent VOC levels that are hazardous to human health and can cause environmental damages.

Versatile Multi-Functional Block Copolymers Made by Atom Transfer Radical Polymerization and Post-Synthetic Modification: Switching from Volatile Organic Compound Sensors to Polymeric Surfactants for Water Rheology Control via Hydrolysis.

Novel, multipurpose terpolymers based on styrene (PS), tert-butyl methacrylate (tBMA) and glycidyl methacrylate (GMA), have been synthesized via Atom Transfer Radical Polymerization (ATRP). Post-synthetic modification with 1-pyrenemethylamine (AMP) allows non-covalent functionalization of carbon nanotubes, eventually yielding a conductive nanocomposite materials capable of interacting with different Volatile Organic Compounds (VOCs) by electrical resistance variation upon exposure. Moreover, facile hydrolysis of the tBMA group yields polyelectrolytic macrosurfactants with remarkable thickening properties for promising applications in water solution, such as Enhanced Oil Recovery (EOR).

BTEX detection with composites of ethylenevinyl acetate and nanostructured carbon.

By using a solvent-based method composites of ethylenevinyl acetate copolymer and carbon black (EVA-CB) were synthesized for sensing BTEX (benzene, toluene, ethylbenzene and xylene) vapours. The composites were characterized using atomic force microscopy (AFM) in an electroconductive mode. Gas sensing results show that EVA-CB can reproducibly detect BTEX and that the response increases linearly with vapour concentration. Compared to gas-sensing measurements of gasoline vapours, the responses with toluene and ethylbenzene are different and can be explained by varying side chains of the benzene ring.

Sol­Gel Synthesis of Manganese Doped Titanium Oxide Nanoparticles for Electrochemical Sensing of Hydroquinone.

Here we report development of a hydroquinone (HQ) electrochemical sensor using nanosized manganese doped titanium oxide as a composite material. The nanomaterial was synthesized with sol gel method using calculated amount of Mn and Ti atoms resulting into a composite metal oxide. Morphological observations indicated a uniform particle size and shape distribution with almost spherical shape and size of about 20­30 nm. While structural analysis indicated formation of mixed phase of TiO2 and MnO forming MnTiO3. The synthesized nanomaterial was used as a matrix for fabrication of hydroquinone electrochemical sensor and tested over a wide range from 2 mM to 10 mM. The developed electrochemical sensor exhibited sensitivity of 2.96 µA mM⁻¹ (23.55 µA mM⁻¹ cm⁻²) with a detection limit of 7.5 µM, which is rarely reported for such composite nanomaterial.

MOF Thin Film-Coated Metal Oxide Nanowire Array: Significantly Improved Chemiresistor Sensor Performance.

A strategy for combining metal oxides and metal-organic frameworks is proposed to design new materials for sensing volatile organic compounds, for the first time. The prepared ZnO@ZIF-CoZn core-sheath nanowire arrays show greatly enhanced performance not only on its selectivity but also on its response, recovery behavior, and working temperature.