Ferroelectric Texture of Individual Barium Titanate Nanocrystals.

Ferroelectric materials display exotic polarization textures at the nanoscale that could be used to improve the energetic efficiency of electronic components. The vast majority of studies were conducted in two dimensions on thin films that can be further nanostructured, but very few studies address the situation of individual isolated nanocrystals (NCs) synthesized in solution, while such structures could have other fields of applications. In this work, we experimentally and theoretically studied the polarization texture of ferroelectric barium titanate (BaTiO3, BTO) NCs attached to a conductive substrate and surrounded by air. We synthesized NCs of well-defined quasicubic shape and 160 nm average size that conserve the tetragonal structure of BTO at room temperature. We then investigated the inverse piezoelectric properties of such pristine individual NCs by vector piezoresponse force microscopy (PFM), taking particular care to suppress electrostatic artifacts. In all of the NCs studied, we could not detect any vertical PFM signal, and the maps of the lateral response all displayed larger displacement amplitude on the edges with deformations converging toward the center. Using field phase simulations dedicated to ferroelectric nanostructures, we were able to predict the equilibrium polarization texture. These simulations revealed that the NC core is composed of 180° up and down domains defining the polar axis that rotate by 90° in the two facets orthogonal to this axis, eventually lying within these planes forming a layer of about 10 nm thickness mainly composed of 180° domains along an edge. From this polarization distribution, we predicted the lateral PFM response, which was revealed to be in very good qualitative agreement with the experimental observations. This work positions PFM as a relevant tool to evaluate the potential of complex ferroelectric nanostructures to be used as sensors.

Effects of Calcination Temperature on the Synthesis of One-Pot Sol-Gelled Barium Titanate Powder and Its Performance as an Endodontic Radiopacifier.

Barium titanate (BaTiO3, BTO), conventionally used for dielectric and ferroelectric applications, has been assessed for biomedical applications, such as its utilization as a radiopacifier in mineral trioxide aggregates (MTA) for endodontic treatment. In the present study, BTO powders were prepared using the sol-gel process, followed by calcination at 400-1100 °C. The X-ray diffraction technique was then used to examine the as-prepared powders to elucidate the effect of calcination on the phase composition and crystalline size of BTO. Calcined BTO powders were then used as radiopacifiers for MTA. MTA-like cements were investigated to determine the optimal calcination temperature based on the radiopacity and diametral tensile strength (DTS). The experimental results showed that the formation of BTO phase was observed after calcination at temperatures of 600 °C and above. The calcined powders were a mixture of BaTiO3 phase with residual BaCO3 and/or Ba2TiO4 phases. The performance of MTA-like cements with BTO addition increased with increasing calcination temperature up to 1000 °C. The radiopacity, however, decreased after 7 days of simulated oral environmental storage, whereas an increase in DTS was observed. Optimal MTA-like cement was obtained by adding 40 wt.% 1000 °C-calcined BTO powder, with its resulting radiopacity and DTS at 4.83 ± 0.61 mmAl and 2.86 ± 0.33 MPa, respectively. After 7 days, the radiopacity decreased slightly to 4.69 ± 0.51 mmAl, accompanied by an increase in DTS to 3.13 ± 0.70 MPa. The optimal cement was biocompatible and verified using MG 63 and L929 cell lines, which exhibited cell viability higher than 95%.

Microsphere lens array embedded microfluidic chip for SERS detection with simultaneous enhancement of sensitivity and stability.

Surface enhanced Raman spectroscopy (SERS) utilizes the fingerprint features of molecular vibrations to identify and detect substances. However, in traditional single focus excitation scenarios, its signal collection efficiency of the objective is restricted. Furthermore, the uneven distribution of samples on the SERS substrate would result in poor signal stability, while the excitation power is limited to avoid sample damage. SERS detection system always requires precise adjustment of focal length and spot size, making it difficult for point-of-care testing applications. Here, we proposed a SERS microfluidic chip with barium titanate microspheres array (BTMA) embedded using vacuum self-assembled hot-pressing method for SERS detection with simultaneous enhancement of sensitivity and stability. Due to photonic nano-jets and directional antenna effects, high index microspheres are perfect micro-lens for effective light focusing and signal collecting. The BTMA can not only disperse excitation beam into an array of focal points covering the target uniformly with very low signal fluctuation, but enlarge the power threshold for higher signal intensity. We conducted a proof-of-principle experiment on chip for the detection of bacteria with immuno-magnetic tags and immuno-SERS tags. Together with magnetic and ultrasonic operations, the target bacteria in the flow were evenly congregated on the focal plane of BTMA. It demonstrated a limit of detection of 5 cells/mL, excellent signal reproducibility (error∼4.84%), and excellent position tolerance of 500 µm in X-Y plane (error∼5.375%). It can be seen that BTMA-SERS microfluidic chip can effectively solve the contradiction between sensitivity and stability in SERS detection.

Biomimetic-inspired piezoelectric ovalbumin/BaTiO3 scaffolds synergizing with anisotropic topology for modulating Schwann cell and DRG behavior.

The treatment of peripheral nerve injury is a clinical challenge that tremendously affected the patients' health and life. Anisotropic topographies and electric cues can simulate the regenerative microenvironment of nerve from physical and biological aspects, which show promising application in nerve regeneration. However, most studies just unilaterally emphasize the effect of sole topological- or electric- cue on nerve regeneration, while rarely considering the synergistic function of both cues simultaneously. In this study, a biomimetic-inspired piezoelectric topological ovalbumin/BaTiO3 scaffold that can provide non-invasive electrical stimulation in situ was constructed by combining piezoelectric BaTiO3 nanoparticles and surface microtopography. The results showed that the incorporation of piezoelectric nanoparticles could improve the mechanical properties of the scaffolds, and the piezoelectric output of the scaffolds after polarization was significantly increased. Biological evaluation revealed that the piezoelectric topological scaffolds could regulate the orientation growth of SCs, promote axon elongation of DRG, and upregulate the genes expression referring to myelination and axon growth, thus rapidly integrated chemical-mechanical signals and transmitted them for effectively promoting neuronal myelination, which was closely related to peripheral neurogenesis. The study suggests that the anisotropic surface topology combined with non-invasive electronic stimulation of the ovalbumin/BaTiO3 scaffolds possess a promising application prospect in the repair and regeneration of peripheral nerve injury.

Direct Observation of Trace Elements in Barium Titanate of Multilayer Ceramic Capacitors Using Atom Probe Tomography.

Accurately controlling trace additives in dielectric barium titanate (BaTiO3) layers is important for optimizing the performance of multilayer ceramic capacitors (MLCCs). However, characterizing the spatial distribution and local concentration of the additives, which strongly influence the MLCC performance, poses a significant challenge. Atom probe tomography (APT) is an ideal technique for obtaining this information, but the extremely low electrical conductivity and piezoelectricity of BaTiO3 render its analysis with existing sample preparation approaches difficult. In this study, we developed a new APT sample preparation method involving W coating and heat treatment to investigate the trace additives in the BaTiO3 layer of MLCCs. This method enables determination of the local concentration and distribution of all trace elements in the BaTiO3 layer, including additives and undesired impurities. The developed method is expected to pave the way for the further optimization and advancement of MLCC technology.

Enhanced Piezocatalytic Performance of Li-doped BaTiO3 Through a Facile Sonication-Assisted Precipitation Approach.

Piezocatalysis-induced dye degradation has garnered significant attention as an effective method for addressing wastewater treatment challenges. In our study, we employed a room-temperature sonochemical method to synthesize piezoelectric barium titanate nanoparticles (BaTiO3: BTO) with varying levels of Li doping. This approach not only streamlined the sample preparation process but also significantly reduced the overall time required for synthesis, making it a highly efficient and practical method. One of the key findings was the exceptional performance of the Li-doped BTO nanoparticles. With 20 mg of Li additive, we achieved 90 % removal of Rhodamine B (RhB) dye within a relatively short timeframe of 150 minutes, all while subjecting the sample to ultrasonic vibration. This rapid and efficient dye degradation was further evidenced by the calculated kinetic rate constant, which indicated seven times faster degradation rate compared to pure BTO. The enhanced piezoelectric performance observed in the Li-doped BTO nanoparticles can be attributed to the strategic substitution of Li atoms, which facilitated a more efficient transfer of charge charges at the interface. Overall, our study underscores the potential of piezocatalysis coupled with advanced materials like Li-doped BTO nanoparticles as a viable and promising solution for wastewater treatment, offering both efficiency and environmental sustainability.

The effect of dental material type and masticatory forces on periodontitis-derived subgingival microbiomes.

Restorative dental materials can frequently extend below the gingival margin, serving as a potential haven for microbial colonization, and altering the local oral microbiome to ignite infection. However, the contribution of dental materials on driving changes of the composition of the subgingival microbiome is under-investigated. This study evaluated the microbiome-modulating properties of three biomaterials, namely resin dental composites (COM), antimicrobial piezoelectric composites (BTO), and hydroxyapatite (HA), using an optimized in vitro subgingival microbiome model derived from patients with periodontal disease. Dental materials were subjected to static or cyclic loading (mastication forces) during biofilm growth. Microbiome composition was assessed by 16S rRNA gene sequencing. Dysbiosis was measured in terms of subgingival microbial dysbiosis index (SMDI). Biomaterials subjected to cyclic masticatory loads were associated with enhanced biofilm viability except on the antibacterial composite. Biomaterials held static were associated with increased biofilm biomass, especially on HA surfaces. Overall, the microbiome richness (Chao index) was similar for all the biomaterials and loading conditions. However, the microbiome diversity (Shannon index) for the HA beams was significantly different than both composites. In addition, beta diversity analysis revealed significant differences between composites and HA biomaterials, and between both loading conditions (static and cyclic). Under static conditions, microbiomes formed over HA surfaces resulted in increased dysbiosis compared to composites through the enrichment of periopathogens, including Porphyromonas gingivalis, Porphyromonas endodontalis, and Fretibacterium spp., and depletion of commensals such as Granulicatella and Streptococcus spp. Interestingly, cyclic loading reversed the dysbiosis of microbiomes formed over HA (depletion of periopathogenes) but increased the dysbiosis of microbiomes formed over composites (enrichment of Porphyromonas gingivalis and Fusobacterim nucleatum). Comparison of species formed on both composites (control and antibacterial) showed some differences. Commercial composites enriched Selenomonas spp. and depleted Campylobacter concisus. Piezoelectric composites effectively controlled the microbiome viability without significantly impacting the species abundance. Findings of this work open new understandings of the effects of different biomaterials on the modulation of oral biofilms and the relationship with oral subgingival infections.

Improving the Performance of Pd for Formic Acid Dehydrogenation by Introducing Barium Titanate.

Formic acid, a safe and widely available organic compound, produces hydrogen under mild conditions, with the existence of Pd-based catalysts. Efficiently generating hydrogen via formic acid decomposition (FAD) is restricted by the cleavage of the C-H bond in adsorbed HCOO* and strong adsorption of hydrogen on the Pd surface. Herein, tetragonal-phase barium titanate (TBT) was in situ grown on reduced graphene oxide (rGO) to support Pd (Pd/TBT/rGO) for FAD. The internal electric field exists around TBT owing to its spontaneous polarization capacity. The physical characterizations illustrate that the introduction of barium titanate affects the catalytic performance of the catalyst by decreasing the particle size of Pd nanoparticles (NPs) and forming electron-rich Pd. The as-synthesized Pd/TBT/rGO exhibited excellent catalytic activity and hydrogen selectivity for FAD with a high initial turnover frequency up to 3019.72 h-1 at 333 K. The reason for this enhancement is not only the small-size Pd NPs but also the internal electric field from TBT, which promotes the desorption of adsorbed hydrogen on the Pd surface. Additionally, the electron-rich Pd is favorable to the cleavage of the C-H bond in HCOO*. This work will improve the understanding of the characterization of barium titanate and provide a new design strategy for the FAD catalyst.

Nanoimprinting Solution-Derived Barium Titanate for Electro-Optic Metasurfaces.

Electro-optic metasurfaces have demonstrated significant potential in enhancing the modulation speed and efficiency for fast and large-scale free-space optical devices. Barium titanate has a strong electro-optic Pockels coefficient, but its availability in thin-film form is restricted due to costly growth processes or low thickness. Here, we fabricated active metasurfaces using an etch-free bottom-up process with sol-gel-based polycrystalline barium titanate with a large electro-optic coefficient similar to bulk lithium niobate. We achieve strong hybrid Mie/surface lattice resonances with a quality-factor of 200 at 633 nm wavelength, enhancing the light-matter interaction and therefore the Pockels effect. The metasurface transmission is electro-optically modulated with up to 5 MHz driving frequency at low voltages of less than 1 V thanks to resonant enhancement of the modulation amplitude by 2 orders of magnitude. This successful demonstration of electro-optic modulation in nanoimprinted barium titanate structures paves the way for low-cost and large-scale free-space modulators or tunable metalenses.

Ferroelectric Phase Transition in Barium Titanate Revisited with Ab Initio Molecular Dynamics.

The ferroelectric phase transition of the perovskite barium titanate as well as its technical importance regarding the switching of respective polar properties is well known and has been thoroughly studied, both experimentally and on theoretical grounds. While details about the phase diagram as well as transition temperatures are experimentally well known, the theoretical approaches still face difficulties in contributing a detailed description of these phase transitions. Within this work, a new methodological approach is introduced to revisit the ferroelectric phase transition with first-principles methods. With the chosen ab initio molecular dynamics (AIMD) method in combination with the applied NpT ensemble, we are able to join the accuracy of density functional theory (DFT) with ambient conditions, realized using a thermostat and barostat in an MD simulation. The derived phase diagram confirms recent corrections in the theoretical models and reproduces the phase boundary pressure dependence of TC. In conclusion of the statistical atomistic dynamics, the nature of the transition can be described in a more detailed way. In addition, this work paves the way towards locally patterned piezoelectrica by means of acoustic standing waves as well as piezoelectrically induced acoustic resonators.

Bioactive Hydroxyapatite Aerogels with Piezoelectric Particles.

Open-cell foams based on hydroxyapatite (HAp) can mimic the extracellular matrix (ECM) to better replace damaged hard tissues and assist in their regeneration processes. Aerogels of HAp nanowires (NW) with barium titanate (BT) particles were produced and characterized regarding their physical and chemical properties, bioactivity, and in vitro cytotoxicity. Considering the role of piezoelectricity (mainly due to collagen) and surface charges in bone remodeling, all BT particles, of size 280 nm and 2 and 3 µm, contained BaTiO3 in their piezoelectric tetragonal phase. The synthesized nanowires were verified to be AB-type carbonated hydroxyapatite. The aerogels showed high porosity and relatively homogeneous distribution of the BT particles. Barium titanate proved to be non-cytotoxic while all the aerogels produced were cytotoxic for an extract concentration of 1 mg/mL but became non-cytotoxic at concentrations of 0.5 mg/mL and below. It is possible that these results were affected by the higher surface area and quicker dissolution rate of the aerogels. In the bioactivity assays, SEM/EDS, it was not easy to differentiate between the apatite deposition and the surface of the HAp wires. However, a quantitative EDS analysis shows a possible CaP deposition/dissolution cycle taking place.

Horizontally-oriented barium titanate@polydomine/polyimide nanocomposite films for high-temperature energy storage.

High-temperature ceramics polymer dielectric nanocomposite materials have broad application prospects in energy storage. The barium titanate (BT) plays an important role as one of outstanding representative ceramics in the dielectric nanocomposite materials. However, there is little known for the effects of two-dimensional (2D) BT morphology and layout on the properties of high-temperature nanocomposite materials. Hence, 2D scale-like BT ceramic fillers were prepared from layered K0.8Li0.27Ti1.73O4 crystals as precursors using a combined solid-state and hydrothermal process. 2D scale-like BT@polydopamine (PDA) core-shell nanocomposites were prepared via coating PDA on the BT. BT@PDA/polyimide(PI) nanocomposite films were fabricated by horizontally oriented distribution of BT@PDA in the PI matrix. The BT@PDA/PI nanocomposite films exhibit a high energy density (3.34 J/cm3) and high charge-discharge efficiency (83.68 %) at 150 °C. It is currently the highest energy storage performance in the BT/PI nanocomposite films at 150 °C. The excellent properties are due to preventing upward breakdown of electrical pathways and promoting dispersion and entanglement of the electrical pathway routes. Additionally, strong electrostatic interactions between the different polymer chains (PDA and PI) restricts the movement of space charges. This work demonstrates that introducing horizontally oriented, organically shell-modified and 2D small-sized BT nanoparticles into a PI matrix is an effective method for improving energy storage performance.

Silver doped barium titanate nanoparticles for enhanced visible light photocatalytic degradation of dyes.

Due to the rapid growth of global population, new, fast and reliable methods must be developed to purify contaminated water. Various photocatalysts have been developed to remove organic dyes from water. Herein, Ag doped BaTiO3 has been synthesized using a facile solvothermal method and its excellent photocatalytic activities were demonstrated in degradation of both anionic and cationic dyes under visible light illumination. Ag doped BaTiO3 nanoparticles showed greater efficacy in the degradation of methylene blue (MB) and eosin yellow (EY) than undoped BaTiO3 nanoparticles, which makes them a better candidate for photocatalysis. 1.0 AgBT sample showed the highest photocatalytic activity for MB (99.1 % in 100 min) and EY (99.3 % in 60 min) dye degradation compared with those of other samples. Further, the trapping experiments revealed that hydroxyl radicals and holes are the active species in the photocatalytic process of MB and EY dye degradation and recycle test showed excellent stability of the synthesized material.

3D printed barium titanate/calcium silicate composite biological scaffold combined with structural and material properties.

In the case of a large bone defect, the human endogenous electrical field is no longer sufficient. Therefore, it is necessary to support structural electrical bone scaffolds. Barium titanate (BT) has received much attention in bone tissue engineering applications due to its biocompatibility and ability to maintain charged surfaces. However, its processability is poor and it does not have the biological activity to promote mineralization, which limits its use in bone repair. In this paper, a composite bone scaffold with excellent piezoelectric properties was prepared by combining 20 wt% calcium silicate. The influence of the light curing process on the properties of the piezoelectric biological scaffold was investigated by comparing it with the traditional piezoelectric ceramic molding method (dry pressing). Despite the structural features of 3D printing (layered structure, pore features), the piezoelectric and mechanical properties of the scaffold are weakened. However, 3D-printed scaffolds can combine structural and piezoelectric properties, which makes the 3D-printed scaffold more effective in terms of degradation and antibacterial performance. In terms of cell activity, piezoelectric properties attract proteins and nutrients into the scaffold, promoting cell growth and differentiation. Besides, it is undeniable that the pore structure of the scaffolds plays an important role in the biological properties. Finally, the 3D printed scaffolds have excellent antimicrobial properties due to the redox reaction under piezoelectric effect as well as structural characterization.

Enhanced photocatalytic degradation of Rhodamine B using gold nanoparticles decorated on BaTiO3 with surface plasmon resonance enhancement.

This study focused on synthesizing and applying gold nanoparticle (Au NP) decorated barium titanate (BaTiO3) nanoparticles for photocatalytic purposes. BaTiO3 NPs were synthesized using a facile hydrothermal method. Various techniques were employed to characterize the structure and morphological characteristics of the prepared materials. The photocatalytic degradation of Rhodamine B over the Au NPs-modified BaTiO3 photocatalysts was studied. Trapping experiments were conducted using different scavengers to elucidate the degradation mechanism and the involvement of photogenerated species. The incorporation of an appropriate amount of Au NPs into the composites resulted in a significant improvement in photocatalytic activity, attributed to the combined effect of Schottky junction at the interface and the surface plasmon resonance of Au NPs.

Stretchable Magneto-Mechanical Configurations with High Magnetic Sensitivity Based on "Gel-Type" Soft Rubber for Intelligent Applications.

"Gel-type" soft and stretchable magneto-mechanical composites made of silicone rubber and iron particles are in focus because of their high magnetic sensitivity, and intelligence perspective. The "intelligence" mentioned here is related to the "smartness" of these magneto-rheological elastomers (MREs) to tune the "mechanical stiffness" and "output voltage" in energy-harvesting applications by switching magnetic fields. Hence, this work develops "gel-type" soft composites based on rubber reinforced with iron particles in a hybrid with piezoelectric fillers such as barium titanate. A further aspect of the work relies on studying the mechanical stability of intelligence and the stretchability of the composites. For example, the stretchability was 105% (control), and higher for 158% (60 per 100 parts of rubber (phr) of barium titanate, BaTiO3), 149% (60 phr of electrolyte iron particles, EIP), and 148% (60 phr of BaTiO3 + EIP hybrid). Then, the magneto-mechanical aspect will be investigated to explore the magnetic sensitivity of these "gel-type" soft composites with a change in mechanical stiffness under a magnetic field. For example, the anisotropic effect was 14.3% (60 phr of EIP), and 4.4% (60 phr of hybrid). Finally, energy harvesting was performed. For example, the isotropic samples exhibit ~20 mV (60 phr of BaTiO3), ~5.4 mV (60 phr of EIP), and ~3.7 mV (60 phr of hybrid). However, the anisotropic samples exhibit ~5.6 mV (60 phr of EIP), and ~8.8 mV (60 phr of hybrid). In the end, the composites prepared have three configurations, namely one with electro-mechanical aspects, another with magnetic sensitivity, and a third with both features. Overall, the experimental outcomes will make fabricated composites useful for different intelligent and stretchable applications.

Ultrasound stimulated piezoelectric barium titanate and boron nitride nanotubes in nonconductive poly-ε-caprolactone nanofibrous scaffold for bone tissue engineering.

Nanomaterials can provide unique solutions for the problems experienced in tissue engineering by improving a scaffold's physico-bio-chemical properties. With its piezoelectric property, bone is an active tissue with easy adaptation and remodeling through complicated mechanisms of electromechanical operations. Although poly(ε-caprolactone) (PCL) is an excellent polymer for bone tissue engineering, it is lack of conductivity. In this study, piezoelectric barium titanates (BaTiO3) and boron nitride nanotubes (BNNTs) are used as ultrasound (US) stimulated piezoelectric components in PCL to mimic piezoelectric nature of bone tissue. Electric-responsive Human Osteoblast cells on the scaffolds were stimulated by applying low-frequency US during cell growth. Biocompatibility, cell adhesion, alkaline phosphatase activities and mineralization of osteoblast cells on piezo-composite scaffolds were investigated. BaTiO3or BNNTs as reinforcement agents improved physical and mechanical properties of PCL scaffolds.In vitrostudies show that the use of BaTiO3or BNNTs as additives in non-conductive scaffolds significantly induces and increases the osteogenic activities even without US stimulation. Although BaTiO3is one of the best piezoelectric materials, the improvement is more dramatic in the case of BNNTs with the increased mineralization, and excellent chemical and mechanical properties.

Palladium-Catalyzed Hydrogenation of Black Barium Titanate for Multienzyme-Piezoelectric Synergetic Tumor Therapy.

Piezocatalytic tumor therapy is an emerging reactive oxygen species (ROS)-generating therapeutic approach that relies on piezoelectric polarization under ultrasound (US) irradiation. Optimizing ROS production is a primary objective for enhancing treatment efficiency. In this study, oxygen-vacancy-rich Pd-integrated black barium titanate (BTO) nanoparticles are rationally engineered to boost the ROS generation efficiency via the introduction of Pd. Pd-catalyzed hydrogenation at low temperatures narrows the bandgap of BTO and reduces the recombination rate of electron-hole pairs. Furthermore, Pd has dual-enzyme-mimicking characteristics, including peroxidase- and catalase-mimicking activities, which further heighten the therapeutic efficacy by enhancing ROS production and reversing the hypoxic tumor microenvironment. Importantly, the dual enzymatic activity of Pd can be amplified by multiple redox processes sparked by the piezoelectric potential under US stimulation, resulting in bilaterally enhanced multienzyme-piezoelectric synergetic therapy. In vitro and in vivo results confirm high tumor inhibition in murine breast cancer cells. This work stresses the critical effects of defect engineering-optimized piezodynamic tumor therapy.

Investigation and optimization of In-Vitro behaviour of Perovskite barium titanate as a scaffold and protective coatings.

The piezoelectric effect is widely known to have a significant physiological function in bone development, remodeling, and fracture repair. As a well-known piezoelectric material, barium titanate is particularly appealing as a scaffold layer to improve bone tissue engineering applications. Currently, the chemical bath deposition method is used to prepare green synthesized barium titanate coatings to improve mechanical and biological characteristics. Molarity of the solutions, an essential parameter in chemical synthesis, is changed at room temperature (0.1-1.2 Molar) to prepare coatings. The XRD spectra for as deposited coatings indicate amorphous behavior, while polycrystalline nature of coatings is observed after annealing (300 °C). Coatings prepared with solutions of relatively low molarities, i.e. from 0.1 to 0.8 M, exhibit mixed tetragonal - cubic phases. However, the tetragonal phase of Perovskite barium titanate is observed using solution molarities of 1.0 M and 1.2 M. Relatively high value of transmission, i.e. ∼80%, is observed for the coatings prepared with high molarities. Band gap of annealed coatings varies between 3.47 and 3.70 eV. For 1.2 M sample, the maximum spontaneous polarization (Ps) is 0.327x10-3 (µC/cm2) and the residual polarization (Pr) is 0.072x10-3 (µC/cm2). For 1.2M solution, a high hardness value (1510 HV) is recorded, with a fracture toughness of 28.80 MPam-1/2. Low values of weight loss, after dipping the coatings in simulated body fluid, is observed. The antibacterial activity of BaTiO3 is tested against E. coli and Bacillus subtilis. Drug encapsulation capability is also tested for different time intervals. As a result, CBD-based coatings are a promising nominee for use as scaffold and protective coatings.

High DC-Bias Stability and Reliability in BaTiO3-Based Multilayer Ceramic Capacitors: The Role of the Core-Shell Structure and the Electrode.

With the miniaturization of multilayer ceramic capacitors (MLCCs) and the increase of the electric field on a single dielectric layer, dielectric constant DC-bias stability and reliability have gradually aroused attention in the advanced electronics industry. In this study, MLCCs with outstanding DC-bias stability and reliability were prepared by using dielectric ceramic optimization and electrode optimization strategies. The effect of the Dy-Y doping concentration on the microstructure, dielectric properties, and reliability of BaTiO3-based ceramics was investigated. The shell ratio and effective shell doping concentration of the core-shell structure in ceramic grains play important roles in defects and electrical performances. The ceramic with appropriate doping contents shows a dielectric constant of 1800 and a dielectric constant change rate of -17% under a DC field of 4 kV/mm, which was fabricated into prototype MLCCs with different Ni electrodes. MLCCs exhibit outstanding DC-bias stability with a -28% degradation in the dielectric constant under a DC field of 4 kV/mm while possessing a dielectric constant of 2300 and satisfying the EIA X7S specification. Additionally, it was discovered that MLCCs prepared by using fine-size Ni particle electrodes have low electrode roughness and high interfacial Schottky barriers, resulting in better reliability. This study provides promising candidate materials and theoretical references for high-end and high DC-bias stability MLCCs.