Catalyst and base-free, direct oxidation of chitin to lactic acid with hydrogen peroxide.

In recent years, the research on the conversion of chitin to high value-added chemicals has attracted more and more attention. At present, the method of preparing lactic acid from chitin mostly uses strong base or catalyst. The reaction system under alkaline condition not only corrodes the container but also easily harms the human body. Herein, a simple and effective method to convert chitin to organic acids in catalyst and base-free conditions is developed. The use of H2O2 only can efficiently convert chitin to organic acids in the absence of bases and catalysts. Under the optimal conditions of 30 mg chitin, 2.1 mL water, 0.9 mL H2O2 at 230 °C for 1.5 h, the lactic acid yield of chitin can reach 58.2 % and the total organic acid yield can reach 84.0 %. This work provides an efficient method for the resource utilization of chitin biomass.

Base-Free Oxidation of HMF to FDCA over Ru/Cu-Co-O·MgO under Aqueous Conditions.

The copper-cobalt metal oxide composite magnesium oxide catalyst loaded with Ru has achieved the aerobic oxidation of 5-hydroxymethylfurfural (HMF) to the bio-based polyester monomer 2,5-furandicarboxylic acid (FDCA) under base-free conditions. Several Ru/Cu-Co-O·MgO catalysts were prepared, with Cu-Co-O being a combination of CuO and Co3O4. The catalyst's activity was boosted by the synergistic interaction between copper and cobalt, as well as an optimal copper-to-cobalt molar ratio. Optimal catalytic activity was observed in the Ru4/Cu1-Co1-O·MgO catalyst, loaded with 4 wt% Ru when copper-to-cobalt molar ratio of 1:1 and magnesium oxide compounding amount of 6 mmol were employed. The inclusion of MgO and the load of Ru not only expanded the specific surface area of the catalyst but also heightened its basicity. Additionally, the presence of loaded Ru improved the catalyst's reducibility at low temperatures. In aqueous solution under oxygen pressure, the conversion rate of HMF achieved 100%, and the yield of FDCA was 86.1%. After five reaction cycles, examining the catalyst and solution revealed that Ru nanoparticles resisted leaching or oxidation, and MgO exhibited only slight dissolution. The green separation of the product was achieved using semi-preparative liquid chromatography, selectively collecting the FDCA-containing solution by exploiting variations in interactions between solutes and the stationary/mobile phases. The subsequent steps involved rotary evaporation and drying, resulting in FDCA powder with a purity exceeding 99%. Notably, this approach eliminated the need to introduce concentrated hydrochloric acid into the system for FDCA separation, providing a novel method for synthesising powdered FDCA.

Au-Based Bimetallic Catalysts for Aerobic Oxidation of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid under Base-Free Reaction Conditions.

The aerobic oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) plays a pivotal role in the synthesis of renewable, biodegradable plastics and sustainable chemicals. Although supported gold nanoclusters (NCs) exhibit significant potential in this process, they often suffer from low selectivity. To address this challenge, a series of gold-M (M means Ni, Fe, Cu, and Pd) bimetallic NCs catalysts were designed and synthesized to facilitate the selective oxidation of HMF to FDCA. Our findings indicate that the introduction of doped metals, particularly Ni and Pd, not only improves the reaction rates for HMF tandem oxidation but also promotes high yields of FDCA. Various characterizations techniques, including X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), in situ diffuse reflectance infrared Fourier transform spectroscopy of CO adsorption (CO-DRIFTS), and temperature-programmed desorption of oxygen (O2-TPD), were employed to scrutinize the structural and electronic properties of the prepared catalysts. Notably, an electronic effect was observed across the Au-based bimetallic catalysts, facilitating the activation of reactant molecules and enhancing the catalytic performance. This study provides valuable insights into the alloy effects, aiding in the development of highly efficient Au-based bimetallic catalysts for biomass conversions.

Catalytic and Base-free Suzuki-type α-Arylation of Cyclic 1,3-Dicarbonyls via a Cyclic Iodonium Ylide Strategy.

To date, it remains challenging to achieve a general and catalytic α-arylation of cyclic 1,3-dicarbonyls, particularly ubiquitous heteroaromatic ones. In most cases, the preparation of their medically significant arylated derivatives requires multistep synthetic sequences. Herein, we introduce a new, convenient strategy involving the conversion of cyclic 1,3-dicarbonyls to cyclic iodonium ylides (CIYs), followed by rhodium-catalyzed α-arylation with arylboronic reagents via carbene coupling. This approach is mild, operationally simple, base-free, biocompatible, and exhibits broad substrate scope (>100 examples), especially with respect to various heteroaromatic 1,3-dicarbonyls and ortho-substituted or base-sensitive arylboronic acids. Importantly, owing to the excellent compatibility with various arylboronic acids or boronate esters (ArBpin, ArBneop, or ArBF3K), this method allows the late-stage installation of heterocyclic 1,3-dicarbonyl motifs in highly complex settings. The utility of this transformation is further demonstrated through significantly simplifying the synthesis of several bioactive molecules and natural products.

Supported Gold Catalysts for Base-Free Furfural Oxidation: The State of the Art and Machine-Learning-Enabled Optimization.

Supported gold nanoparticles have proven to be highly effective catalysts for the base-free oxidation of furfural, a compound derived from biomass. Their small size enables a high surface-area-to-volume ratio, providing abundant active sites for the reaction to take place. These gold nanoparticles serve as catalysts by providing surfaces for furfural molecules to adsorb onto and facilitating electron transfer between the substrate and the oxidizing agent. The role of the support in this reaction has been widely studied, and gold-support interactions have been found to be beneficial. However, the exact mechanism of furfural oxidation under base-free conditions remains an active area of research and is not yet fully understood. In this review, we delve into the essential factors that influence the selectivity of furfural oxidation. We present an optimization process that highlights the significant role of machine learning in identifying the best catalyst for this reaction. The principal objective of this study is to provide a comprehensive review of research conducted over the past five years concerning the catalytic oxidation of furfural under base-free conditions. By conducting tree decision making on experimental data from recent articles, a total of 93 gold-based catalysts are compared. The relative variable importance chart analysis reveals that the support preparation method and the pH of the solution are the most crucial factors determining the yield of furoic acid in this oxidation process.

Chemodivergent Tandem Radical Cyclization of Alkene-Substituted Quinazolinones: Rapid Access to Mono- and Di-Alkylated Ring-Fused Quinazolinones.

Chemodivergent tandem radical cyclization offers exciting possibilities for the synthesis of structurally diverse cyclic compounds. Herein, we revealed a chemodivergent tandem cyclization of alkene-substituted quinazolinones under metal- and base-free conditions, this transformation is initiated by alkyl radicals produced from oxidant-induced α-C(sp3 )-H functionalization of alkyl nitriles or esters. The reaction resulted in the selective synthesis of a series of mono- and di-alkylated ring-fused quinazolinones by modulating the loading of oxidant, reaction temperature, and reaction time. Mechanistic investigations show that the mono-alkylated ring-fused quinazolinones is constructed by the key process of 1,2-hydrogen shift, whereas the di-alkylated ring-fused quinazolinones is mainly achieved through crucial steps of resonance and proton transfer. This protocol is the first example of remote second alkylation on the aromatic ring via α-C(sp3 )-H functionalization and difunctionalization achieved by association of two unsaturated bonds in radical cyclization.

DMSO-Assisted K3 PO4 -Catalyzed Cooperative Metal-Free, Base-Free Etherification of Chloroheteroarenes at Low Temperature.

Etherification of chloroheteroarenes was performed at low temperatures under metal-free, ligand-free and base-free conditions, that is, the reaction is promoted by the cooperative effect of DMSO (solvent) as a promoter and K3 PO4 providing the catalytic surface (rather than a base). The protocol exhibits good substrate scope under mild reaction conditions and has also been explored mechanistically.

Cp*Rh(III)-Catalyzed C-H Arylation of Ferrocenethionamides with Aryl Boronic Acids for the Synthesis of Aryl-Ferrocenes.

We developed a Cp*Rh(III)-catalyzed C-H arylation of ferrocenethionamides with arylboronic acids for the synthesis of aryl-ferrocenes under mild and base-free conditions, using Ag2 CO3 as oxidant. The reaction results in high yields and excellent regioselectivity accommodating a broad scope of substrate range and functional group compatibility, and provides an alternative protocol for the generation of highly functionalized aryl-ferrocene compounds.

Metal- and Base-Free Radical Cascade Cyclization/Hydrolysis of CN-Containing 1,6-Enynes with Ethers to Access Polyheterocycles.

A convenient and straightforward approach for the radical cascade cyclization/hydrolysis of CN-containing 1,6-enynes with simple ethers under metal- and base-free conditions is described. This strategy provides a variety of valuable ethers-substituted polyheterocycles via the construction of three C-C bonds, one C=O bond, and two new six-membered rings within a single procedure. The resulting products can smoothly undergo follow-up conversions to various useful scaffolds. The methodology shows excellent functional group tolerance, high step- and atom- economy, and mild reaction conditions, which can be further scaled up to gram quantity in a satisfactory yield.

Microwave-Assisted Base-Free Oxidation of Glucose with H2O2 on Gold- and Manganese-Containing SBA-15-Insight into Factors Affecting the Reaction Pathway.

The aim of this work was to gain insights into the role of manganese in MnSBA-15 support for gold in the base-free glucose oxidation with H2O2 using a microwave reactor. MnSBA-15 (manganese-acidity source) and SBA-15 (for comparison) were modified with Au (2.2 wt. %) and Cu (for comparison). The physicochemical properties of the catalysts were investigated by XRD, N2 ads/des, TEM, UV-vis, XPS, pyridine adsorption combined with FTIR, ATR-FTIR, and 2-propanol decomposition. The effects of the Mn presence in the support, Au NPs size that determines the number of active Au centers, and the Fermi energy (EF), together with the effects of the pore size, reaction temperature, and time on the activity and selectivity of the applied catalysts were assessed and discussed. It has been demonstrated that the presence of Mn generated Lewis acid centers which did not participate in glucose and H2O2 adsorption, and thus, were not directly involved in the reaction pathway. Both reagents were adsorbed on gold nanoparticles. H2O2 was decomposed to molecular oxygen which oxidized glucose to gluconic acid (50-90% of glucose conversion depending on the reaction time and ~100% selectivity). The presence of manganese in MnSBA-15 was responsible for increased Au NPs size and only slightly influenced the negative charge on gold particles. To achieve effective activity a compromise between the number of active gold species and the level of EF has to be reached (for 5.7 nm Au NPs).

Base-free catalytic aerobic oxidation of mercaptans over MOF-derived Co/CN catalyst with controllable composition and structure.

The oxidation of mercaptans under mild and base-free conditions is of vital importance in terms of economy and environment for petroleum processing industry. Here, we developed a series of MOF-derived cobalt-based nitrogen-doped (N-doped) carbon (Co/CN-x) catalysts for the base-free catalytic oxidation of mercaptans. The optimal Co/CN-900 showed excellent catalytic activity for the oxidation of mercaptans under base-free conditions, yielding complete conversion of various mercaptans and > 99.0% selectivity of disulfides. The high performance can be contributed to the advantages of hierarchical pore structure for the diffusion and migration of substrates, self-carrying alkalinity for the formation of mercaptide anion, abundant active Co sites for catalytic oxidation of mercaptans as well as the synergistic effects between the Co nanoparticles (NPs) and N-doped carbon supports. Furthermore, a possible mechanism for base-free catalytic oxidation of mercaptans over Co/CN-x catalysts is proposed based on a set of control experiments and density functional theory (DFT) calculations.

Base-free enantioselective SN2 alkylation of 2-oxindoles via bifunctional phase-transfer catalysis.

N-Protected oxindole derivatives of unprecedented malleability bearing ester moieties at C-3 have been shown to participate in enantioselective phase-transfer-catalysed alkylations promoted by ad-hoc designed quaternary ammonium salts derived from quinine bearing hydrogen-bond donating substituents. For the first time in such phase-transfer-catalysed enolate alkylations, the reactions were carried out under base-free conditions. It was found that urea-based catalysts outperformed squaramide derivatives, and that the installation of a chlorine atom adjacent to the catalyst's quinoline moiety aided in avoiding selectivity-reducing complications related to the production of HBr in these processes. The influence of steric and electronic factors from both the perspective of the nucleophile and electrophile were investigated and levels of enantiocontrol up to 90% ee obtained. The synthetic utility of the methodology was demonstrated via the concise enantioselective synthesis of a potent CRTH2 receptor antagonist.

Modification of Gold Zeolitic Supports for Catalytic Oxidation of Glucose to Gluconic Acid.

Activity of gold supported catalysts strongly depends on the type and composition of support, which determine the size of Au nanoparticles (Au NPs), gold-support interaction influencing gold properties, interaction with the reactants and, in this way, the reaction pathway. The aim of this study was to use two types of zeolites: the three dimensional HBeta and the layered two-dimensional MCM-36 as supports for gold, and modification of their properties towards the achievement of different properties in oxidation of glucose to gluconic acid with molecular oxygen and hydrogen peroxide. Such an approach allowed establishment of relationships between the activity of gold catalysts and different parameters such as Au NPs size, electronic properties of gold, structure and acidity of the supports. The zeolites were modified with (3-aminopropyl)-trimethoxysilane (APMS), which affected the support features and Au NPs properties. Moreover, the modification of the zeolite lattice with boron was applied to change the strength of the zeolite acidity. All modifications resulted in changes in glucose conversion, while maintaining high selectivity to gluconic acid. The most important findings include the differences in the reaction steps limiting the reaction rate depending on the nature of the oxidant applied (oxygen vs. H2O2), the important role of porosity of the zeolite supports, and accumulation of negative charge on Au NPs in catalytic oxidation of glucose.

Oxidative Esterification of 5-Hydroxymethylfurfural with an N-doped Carbon-supported CoCu Bimetallic Catalyst.

The direct fabrication of furan-2,5-dimethylcarboxylate (FDMC), a promising renewable monomer, from biomass-derived 5-hydroxymethylfurfural (HMF) is a cutting-edge process. In this contribution, an elaborately designed N-doped carbon-supported CoCu bimetallic catalyst (Cox Cuy -NC; x/y=9:1, 7:3, 4:6, which represents the designed molar ratio of Co and Cu in the catalyst), which could offer a desirable FDMC yield of 95 % under mild and base-free conditions (Co7 Cu3 -NC, 2 bar O2 , 80 °C, 4 h) is described for the oxidative esterification of HMF. Notably, an FDMC formation rate of 6.1 molFDMC molCo -1 h-1 was achieved over Co7 Cu3 -NC, which represents the highest catalytic efficiency so far among Co-based catalytic systems. It has been demonstrated that Cu-doping in Co7 Cu3 -NC catalyst brings about more active sites (Co-Nx species) with stronger molecular oxygen activation ability. The increase of surface N content of Co7 Cu3 -NC also improves basicity of the catalyst, which favors the hydrogen abstraction process during the HMF oxidative esterification reaction. These findings may pave an efficient and green way for the synthesis of sustainable bio-based polymer monomers.

Cobalt-Polypyrrole/Melamine-Derived Co-N@NC Catalysts for Efficient Base-Free Formic Acid Dehydrogenation and Formylation of Quinolines through Transfer Hydrogenation.

It is highly desired but remains a great challenge to develop non-noble metal heterogeneous catalysts to supersede noble metal catalysts for formic acid (FA) dehydrogenation and the corresponding transfer hydrogenation reactions. Herein, we developed a simple and feasible melamine-assisted pyrolysis strategy for the preparation of atomic cobalt-nitrogen (Co-N)-anchored mesoporous carbon with high metal loading (>6.8 wt %) and high specific surface area (750 m2 g-1). Systematic investigation reveals that both the organic carbon source polypyrrole and the nitrogen source melamine are crucial for the successful generation of such Co-N-based materials. The obtained samples (Co-N)n@NC were demonstrated to be highly efficient and robust catalysts for FA dehydrogenation and formylation of quinolines through transfer hydrogenation, exhibiting a very high hydrogen production rate of 16 451 mL·gCo-1·h-1 for FA dehydrogenation and affording excellent yields (up to 99%), selectivity (up to 98%), and stability for transfer hydrogenation. This work may provide a promising route for the fabrication of more low-cost metal-nitrogen catalysts for green fine chemical synthesis.

Selective Oxidation of Glycerol to Dihydroxyacetone over Au/CuxZr1-xOy Catalysts in Base-Free Conditions.

In this paper, a series of Cu-Zr mixed metal oxide-supported Au catalysts were prepared by deposition-precipitation and evaluated for selective oxidation of glycerol to dihydroxyacetone (DHA) in base-free conditions. The best catalytic performance was obtained with DHA selectivity of up to 95% and yield of 70% in 4 h, 50 °C and PO2 = 0.2 MPa over the Au/Cu0.95Zr0.05 and Au/Cu0.9Zr0.1 catalysts. Combined with the characterization results of Brunauer-Emmett-Teller, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and CO2 temperature programmed desorption, it was proposed that the content of Au0, the size of Au, and the basicity of the catalyst affected the glycerol conversion and DHA selectivity. After the catalyst was recycled four times, the glycerol conversion decreased by about 14% which might result from the carbon deposition or the byproduct adsorption and the agglomeration of Au particle.

Glycerol to Glyceraldehyde Oxidation Reaction Over Pt-Based Catalysts Under Base-Free Conditions.

Glycerol valorization through partial oxidation is a good way of obtaining many different molecules with high added value such as glyceric acid, tartronic acid, dihydroxyacetone, etc. Among the potential products, glyceraldehyde is an interesting chemical compound for its various applications in different domains such as organic chemistry, medical, and cosmetic industries. In the present paper, we studied the effect of different supports on the glycerol oxidation reaction in a batch reactor applying base-free conditions. The tested catalysts were Pt-based materials deposited on various supports (i.e., SiO2, TiO2, ZSM-5, γ-Al2O3), which were synthesized using a deposition method followed by a chemical reduction. The catalysts were extensively characterized (BET, ICP, XRD, TEM, XPS), highlighting differences in terms of specific surface areas, textural properties, and Pt nanoparticles sizes. We evidenced a direct relation between glycerol conversion and glyceraldehyde selectivity (i.e., an increase in glycerol conversion leads to a decrease in glyceraldehyde selectivity). The Pt/γ-Al2O3 catalysts exhibited the highest activity, but their selectivity to glyceraldehyde significantly decreased with time on stream. Pt/SiO2 presented the highest selectivity to glyceraldehyde owing to a slower reaction rate, which allows envisioning technical opportunities to continuously extract the formed glyceraldehyde from the mixture.

Base-Free Iron Catalyzed Transfer Hydrogenation of Esters Using EtOH as Hydrogen Source.

Herein, we report on the use of the iron pincer complex Iron-MACHO-BH, in the base-free transfer hydrogenation of esters with EtOH as a hydrogen source. More than 20 substrates including aromatic and aliphatic esters and lactones were reduced affording the desired primary alcohols and diols with moderate to excellent isolated yields. It is also possible to reduce polyesters to the diols with this method, enabling a novel way of plastic recycling. Reduction of the renewable substrate methyl levulinate proceeds to form 1,4-pentanediol directly. The yields are largely governed by the equilibrium between the alcohol and the ethyl ester.

Selective Base-free Transfer Hydrogenation of α,ß-Unsaturated Carbonyl Compounds using iPrOH or EtOH as Hydrogen Source.

Commercially available Ru-MACHOTM -BH is an active catalyst for the hydrogenation of several functional groups and for the dehydrogenation of alcohols. Herein, we report on the new application of this catalyst to the base-free transfer hydrogenation of carbonyl compounds. Ru-MACHOTM -BH proved to be highly active and selective in this transformation, even with α,ß-unsaturated carbonyl compounds as substrates. The corresponding aliphatic, aromatic and allylic alcohols were obtained in excellent yields with catalyst loadings as low as 0.1-0.5 mol % at mild temperatures after very short reaction times. This protocol tolerates iPrOH and EtOH as hydrogen sources. Additionally, scale up to multi-gram amounts was performed without any loss of activity or selectivity. An outer-sphere mechanism has been proposed and the computed kinetics and thermodynamics of crotonaldehyde and 1-phenyl-but-2-en-one are in perfect agreement with the experiment.

The Role of Mg(OH)2 in the So-Called "Base-Free" Oxidation of Glycerol with AuPd Catalysts.

Mg(OH)2 - and Mg(OH)2 -containing materials can provide excellent performance as supports for AuPd nanoparticles for the oxidation of glycerol in the absence of base, which is considered to be a result of additional basic sites on the surface of the support. However, its influence on the reaction solution is not generally discussed. In this paper, we examine the relationship between the basic Mg(OH)2 support and AuPd nanoparticles in detail using four types of catalyst. For these reactions, the physical interaction between Mg(OH)2 and AuPd was adjusted. It was found that the activity of the AuPd nanoparticles increased with the amount of Mg(OH)2 added under base-free conditions, regardless of its interaction with the noble metals. In order to investigate how Mg(OH)2 affected the glycerol oxidation, detailed information about the performance of AuPd/Mg(OH)2 , physically mixed (AuPd/C+Mg(OH)2 ) and (AuPd/C+NaHCO3 ) was obtained and compared. Furthermore, NaOH and Mg(OH)2 were added during the reaction using AuPd/C. All these results indicate that the distinctive and outstanding performance of Mg(OH)2 supported catalysts in base-free condition is in fact directly related to its ability to affect the pH during the reaction and as such, assists with the initial activation of the primary alcohol, which is considered to be the rate determining step in the reaction.