Clinical Benefits of Arterial Spin-Labeling Magnetic Resonance Imaging for Primary Diffuse Large B-cell Lymphoma of the Central Nervous System Presenting With Lymphomatosis Cerebri: A Case Report.

Of the primary central nervous system (CNS) lymphomas, diffuse large B-cell lymphoma of the CNS (CNS-DLBCL) is an aggressive extranodal lymphoma that originates in the CNS. Lymphomatosis cerebri (LC) is an exceptionally rare subtype, posing diagnostic challenges due to the absence of abnormal enhancement and making the identification of suitable biopsy sites difficult. Arterial spin-labeling magnetic resonance imaging (ASL-MRI) is a non-invasive MRI technique that quantifies tumor blood flow. This report presents a case of CNS-DLBCL with LC, which was evaluated and biopsied using ASL-MRI of the brain. Herein, we present a case of a 32-year-old female who presented with abnormal involuntary movements and cognitive impairments. She underwent an MRI which showed a diffuse and infiltrative lesion in the bilateral basal ganglia, showing a high signal intensity area on fluid-attenuated inversion recovery (FLAIR) images with no contrast enhancement. Computed Tomography scans and Gallium-67 scintigraphy showed no abnormal uptake throughout the whole body. Although she received corticosteroid treatments, subsequent MRI showed an enlarged lesion, and she underwent a brain biopsy. The biopsy site was determined based on high perfusion demonstrated by ASL-MRI and the histological findings positive for B-cell markers led to diagnoses of CNS-DLBCL, specifically LC. Her symptoms improved following high-dose methotrexate and whole-brain irradiation. Subsequent MRI scans showed a dramatic improvement, and the high perfusion observed in the ASL-MRI disappeared. This report has emphasized the critical role of histopathology in diagnosing CNS-DLBCL presenting with LC, a highly aggressive lymphoma requiring prompt treatment. In this case, high ASL-MRI signal intensity indicated an increased area of tumor cell density suitable for biopsy. This is the first report to establish a relationship between cell density and ASL-MRI signal intensity in LC. The challenge in locating the optimal biopsy site due to the lack of contrast enhancement and the difference in tumor cell densities within high signal intensity areas on FLAIR imaging is presented. ASL-MRI provides information on tumor blood flow (TBF), which may be associated with higher tumor cell density, making it a valuable tool for identifying suitable biopsy sites. Thus, ASL-MRI is clinically beneficial for the biopsy of LC cases that show high signal intensity on FLAIR images without contrast enhancement.

Optimal fermentation conditions for growth and recombinant protein production in Pichia pastoris: Strain selection, ploidy level and carbon source.

High-cell-density fermentation is a critical aspect of industrial protein production, requiring the selection of an optimal growth medium and carbon source. Pichia pastoris, a methylotrophic yeast, has been established as a widespread recombinant protein expression system in the food and pharmaceutical industries. The primary objective of this work was to create a superior platform for producing alternative proteins thus contributing to future innovation in these sectors. This study compared three wild-type strains, with two of them also analyzed in their diploid versions, using shake flasks and bioreactors. It investigated glucose and glycerol as carbon sources using mCherry as a protein model. Glycerol emerged as the preferred carbon source, resulting in over 40% increase in biomass concentrations compared to glucose across all strains. Notably, wild-type strain Y-7556 reached an exceptional biomass concentration of 244 g DCW/L in just 48 h, the highest reported to date, highlighting the potential of high-cell-density fermentation in P. pastoris. Regarding protein expression, the diploid version of Y-11430 produced >43% of purified mCherry protein after 123 h of fermentation, compared to the haploid counterpart. Our findings underscore the advantages of diploid strains, optimized fermentation media, and carbon source selection, effectively addressing crucial gaps in the literature.

High-Quality Foaming and Weight Reduction in Microcellular-Injection-Molded Polycarbonate Using Supercritical Fluid Carbon Dioxide under Gas Counter Pressure.

Microcellular injection molding (MuCell®) using supercritical fluid (SCF) as a foaming agent to achieve weight reduction has become popular in carbon emission reduction. In the typical MuCell® process, SCF N2 is commonly used. Although SCF CO2 exhibits high solubility and can achieve a high weight reduction, controlling the foaming is not easy, and its foaming cells are usually larger and less uniform, which limits its industrial application. Our previous studies have shown that gas counter pressure (GCP) can improve the foaming quality effectively. Here, we investigated whether or not the CO2 SCF foaming quality could be improved, and weight reduction was achieved for polycarbonate (PC) material. This is quite important for the electronics industry, in which most of the housing for devices is made of PC materials. MuCell® was subjected to molding experiments using the parameters of the SCF dosage, melt temperature, mold temperature, and injection speed. The results revealed that using CO2 gas for the PC material can reduce the size of microcellular cells to 40 µm and increase the cell densities to 3.97 × 106 cells/cm3. Using GCP significantly improved the microcellular injection-molded parts by reducing the cell size to 20.9 µm (a 45.41% improvement) and increasing the cell density to 8.04 × 106 cells/cm3 (a 102.48% improvement). However, implementing GCP may slightly decrease the target weight reduction. This study reveals that microcellular injection molding of PC parts using SCF CO2 can achieve high-quality foaming and reduce the weight by about 30%.

Comprehensive assessment of corneal microstructural changes following V4c implantable collamer lens surgery using in vivo confocal microscopy.

BACKGROUND: Implantable Collamer Lense (ICL) presents a viable alternative to conventional refractive surgeries, but their impact on corneal microstructure remains unclear. By employing in vivo confocal microscopy (IVCM), we examined changes in stromal and endothelial cells following the insertion of V4c ICLs, with the goal of enhancing post-surgical care and outcomes. METHODS: In this longitudinal investigation, we conducted detailed preoperative assessments on 103 eyes from 53 participants. Follow-up evaluations were carried out after surgery at set intervals: one day, one week, one month, three months, six months, and twelve months. We used IVCM to analyze changes in stromal and endothelial cells. To assess differences between pre- and post-surgery variables and to investigate correlations with age, axial length (AL), and spherical equivalent refraction (SER), we applied a repeated measures mixed-effects model, with statistical significance set at P < 0.05. RESULTS: No vision-threatening complications were reported post-surgery. Significant reductions in stromal cell density (SCD) were observed postoperatively, with anterior and mid- SCD reaching their lowest values at 3 months and posterior SCD at 1 month, remaining below baseline at 12 months. endothelial cell density (ECD) and percentage of hexagonal cells (PHC) decreased initially, recovering by 12 months. Conversely, endothelial cellular area (ECA) and coefficient of variation of cell size (CoV) increased postoperatively, with the most significant change at 1 week. Endothelial deposits were detected in 49 of 101 eyes on postoperative day 1, half of them were absorbed within 3 months post-surgery. Changes in posterior SCD were negatively related to AL, while AL, SER, lens thickness showed associated with endothelium changes. CONCLUSION: Our findings elucidate the corneal microstructural changes following V4c ICL implantation, particularly the significant early reductions in stromal and endothelial cell densities. We recommend careful management of viscoelastics during surgery to minimize endothelial deposits that may harm the endothelium. Enhanced early postoperative monitoring and these surgical adjustments can lead to improved surgical and post-surgical care, ultimately supporting better patient recovery.

Repeated glucose oscillations in high cell-density cultures influence stress-related functions of Escherichia coli.

Engineering microbial cells for the commercial production of biomolecules and biochemicals requires understanding how cells respond to dynamically changing substrate (feast-famine) conditions in industrial-scale bioreactors. Scale-down methods that oscillate substrate are commonly applied to predict the industrial-scale behavior of microbes. We followed a compartment modeling approach to design a scale-down method based on the simulation of an industrial-scale bioreactor. This study uses high cell-density scale-down experiments to investigate Escherichia coli knockout strains of five major glucose-sensitive transcription factors (Cra, Crp, FliA, PrpR, and RpoS) to study their regulatory role during glucose oscillations. RNA-sequencing analysis revealed that the glucose oscillations caused the down-regulation of several stress-related functions in E. coli. An in-depth analysis of strain physiology and transcriptome revealed a distinct phenotype of the strains tested under glucose oscillations. Specifically, the knockout strains of Cra, Crp, and RpoS resulted in a more sensitive transcriptional response than the control strain, while the knockouts of FliA and PrpR responded less severely. These findings imply that the regulation orchestrated by Cra, Crp, and RpoS may be essential for robust E. coli production strains. In contrast, the regulation by FliA and PrpR may be undesirable for temporal oscillations in glucose availability.

Fed-batch strategies for intensified rVSV vector production in high cell density cultures of suspension HEK293 cells.

Vesicular stomatitis virus (VSV) has been increasingly demonstrated as a promising viral vector platform. As the interest over this modality for vaccine and gene therapy applications increases, the need for intensified processes to produce these vectors emerge. In this study, we develop fed-batch-based operations to intensify the production of a recombinant VSV-based vaccine candidate (rVSV-SARS-CoV-2) in suspension cultures of HEK293 cells. A feeding strategy, in which a commercial concentrated medium was added to cultures based on cell growth through a fixed cell specific feeding rate (CSFR), was applied for the development of two different processes using Ambr250 modular bioreactors. Cultures operated in hybrid fed-batch/perfusion (FB/P) or fed-batch (FB) were able to sustain infections performed at 8.0 × 106 cells/mL, respectively resulting in 3.9 and 5.0-fold increase in total yield (YT) and 1.7 and 5.6-fold increase in volumetric productivity (VP) when compared with a batch reference. A maximum viral titer of 4.5 × 1010 TCID50/mL was reached, which is comparable or higher than other processes for VSV production in different cell lines. Overall, our study reports efficient fed-batch options to intensify the production of a rVSV-based vaccine candidate in suspension HEK293 cells.

The effect of adrenaline and trypan blue used during cataract surgery on anatomical and functional outcomes in pseudoexfoliation syndrome patients.

PURPOSE: To evaluate the effect of the intracameral adrenaline and trypan blue used during cataract surgery on corneal endothelial parameters in pseudoexfoliation syndrome (PEX) patients. METHODS: The patients were divided into four groups according to intraoperative use of agents during cataract surgery: intracameral adrenaline (1/10,000, 0.1 ml) (group 1), trypan blue (0.6 mg/ml, 0.1 ml) (group 2), combination of adrenaline and trypan blue (group 3) and none (group 4). RESULTS: Preoperative ECD, CV, HEX and CCT parameters were similar between the groups. A mean loss of 12.7% in ECD was observed at the postoperative third months compared to the preoperative. In group 3, ECD was found to be lower in the postoperative third months compared to the preoperative (p = 0.014). In the other groups, no statistically significant difference was found in preoperative and postoperative comparisons. CONCLUSION: In conclusion, the utilization of intracameral adrenaline or trypan blue did not cause a significant difference in corneal endothelium in PEX patients. However, their combined use may have a negative effect on endothelial cell density. In a cataract surgery performed in the presence of PEX, the increased likelihood of endothelial damage should be taken into consideration, and appropriate precautions should be taken preoperatively and intraoperatively.

Clinical observations of EVO-ICL implantation with single incision without viscoelastic agent.

BACKGROUND: To investigate the safety and effectiveness of non-viscoelastic agent technique for EVO-ICL implantation. METHODS: A total of 181 myopia eyes that underwent non-toric ICL without viscoelastic agent through single incision from Beijing Tongren Hosipital were included. An analysis was conducted on the quantity of haptics that were initially implanted intraoperatively into the posterior chamber. Intraocular pressure (IOP) was evaluated at before and 2 h,24 h,1week,6month after surgery. Anterior chamber volume(ACV), anterior chamber depth(ACD), anterior chamber angle(ACA), pupil diameter(PD) and corneal densitometry density (ECD) were evaluated at before and 24 h postoperatively. Refractive outcomes were investigated at before, 24 h ,7 days and 6months. Vault was evaluated at 24 h ,7 days and 6months. RESULTS: The efficacy and safety indices were 1.30 ± 0.32 and 1.31 ± 0.32, respectively. Of 181 eyes, 99 eyes received 4 haptics on the first attempt without any adjustment, and 72 eyes received lens alignment without an viscoelastic agent. The success rate of the viscoelastic agent free procedure was 94.5%. Two hours postoperatively, IOP was 17.41 ± 3.77 mmHg, which was significantly higher than baseline value (t = 8.930, P < 0.000), however there was no significant difference between preoperative IOP and IOP at 1 day ,1 week and 6 months postoperatively. The ECD changed from 2895.52 ± 253.73 cells/mm2 preoperatively to 2873.66 ± 244.17 cells/mm2 at 1 day and 2882.63 ± 239.97 postoperatively, and the difference was not statistically significant (t = 1.811, P = 0.072). The ACA was narrowed by 42% on the first day. CONCLUSION: The pure viscoelastic agent free technique is an efficient and safe way for ICL implantation. It can be a safer method of ICL implantation because of it reduces the risk of complications associated with ocular hypertension at the early postoperative stages. TRIAL REGISTRATION: Chinese Clinical Trial Registry (ChiCTR2000036335) at August 20, 2020.

Outcomes of retropupillary iris claw lens implantation in patients with intraocular lens dislocation and low (less than 1000 cells/mm2) corneal endothelial cell density.

BACKGROUND: Posterior chamber intraocular lens (IOL) dislocation is a common complication of cataract surgery. Dislocated IOLs often require surgical intervention due to the potentially severe risks of leaving this condition untreated. If a patient with extremely low corneal endothelial cell density (ECD) presents with IOL dislocation, the surgeon faces a crucial dilemma of choosing the most optimal surgical treatment option. We sought to investigate the efficacy and safety of retropupillary iris claw intraocular lens (R-IOL) implantation in patients with IOL dislocation and extremely low (< 1000 cells/mm2) ECD. METHODS: We retrospectively reviewed the medical records of nine patients (all men) whose pre-operative ECD was < 1000 cells/mm2 and who underwent R-IOL implantation due to intraocular subluxation or total dislocation into the vitreous cavity between 2014 and 2020. We evaluated corneal endothelial function and visual outcomes after surgery. RESULTS: Nine patients were included in this study. The mean age at diagnosis was 64.89 ± 7.15 years (range 57-76 years), and the follow-up duration was 37.93 ± 23.72 months (range 18.07-89.07 months). No patients developed bullous keratopathy during follow-up. Compared to the initial ECD, corneal thickness (CT), coefficient variation of cell area (CV) and percentage of hexagonal cells (HEX), there was no statistically significant decrease in the ECD, CV, and HEX at last follow-up (P = 0.944, 0.778, 0.445, 0.443). There was significant improvement in the mean uncorrected distance visual acuity (UDVA) at the last follow-up (average 0.13 logMAR, 20/27 Snellen) compared to the pre-operative mean UDVA (average 1.09 logMAR, 20/250 Snellen) (P < 0.01). CONCLUSIONS: R-IOL implantation did not result in a statistically significant decline in corneal endothelial function in patients with preoperatively low ECD, and it significantly improved the mean UDVA postoperatively. R-IOL implantation appears to be a safe and effective treatment modality for intraocular lens dislocation in patients with low ECD (< 1000 cells/mm²); however, long-term follow-up studies are warranted to corroborate these findings.

Innovations in cell culture-based influenza vaccine manufacturing - from static cultures to high cell density cultivations.

Influenza remains a serious global health concern, causing significant morbidity and mortality each year. Vaccination is crucial to mitigate its impact, but requires rapid and efficient manufacturing strategies to handle timing and supply. Traditionally relying on egg-based production, the field has witnessed a paradigm shift toward cell culture-based methods offering enhanced flexibility, scalability, and process safety. This review provides a concise overview of available cell substrates and technological advancements. We summarize crucial steps toward process intensification - from roller bottle production to dynamic cultures on carriers and from suspension cultures in batch mode to high cell density perfusion using various cell retention devices. Moreover, we compare single-use and conventional systems and address challenges including defective interfering particles. Taken together, we describe the current state-of-the-art in cell culture-based influenza virus production to sustainably meet vaccine demands, guarantee a timely supply, and keep up with the challenges of seasonal epidemics and global pandemics.

Systematic optimization of culture media for maintenance of human induced pluripotent stem cells using the response surface methodology.

The application of human induced pluripotent stem cells (hiPSCs) provides tremendous opportunities in cell therapy. However, culturing these cells faces many practical challenges, including costs associated with cell culture media and the optimization of cell culture conditions. Providing an optimized culture platform for hiPSCs to maintain pluripotency and self-renewal and generate cost-effective and robust therapeutics is an immediate requirement. This study used the design of experiments and the response surface methodology, a powerful statistical tool, to generate empirical models for predicting the optimal culture conditions of the hiPSCs. Pluripotency and cell proliferation were applied as read-outs to determine the optimal concentration of basic fibroblast growth factor (bFGF) and cell density. One model was defined to predict pluripotency and cell proliferation in terms of the predictor variables of the bFGF concentration and cell seeding density. Predicted culture conditions to maximize maintaining cell pluripotency were successfully validated. The present study's findings provide a novel approach that can potentially allow controllable hiPSC culture routine in translational research.

Biomass specific perfusion rate as a control lever for the continuous manufacturing of biosimilar monoclonal antibodies from CHO cell cultures.

Continuous manufacturing enables high volumetric productivities of biologics such as monoclonal antibodies. However, it is challenging to maintain both high viable cell densities and productivities at the same time for long culture durations. One of the key controls in a perfusion process is the perfusion rate which determines the nutrient availability and potentially controls the cell metabolism. Cell Specific Perfusion Rate (CSPR) is a feed rate proportional to the viable cell density while Biomass Specific Perfusion Rate (BSPR) is a feed rate proportional to the biomass (cell volume multiply by cell density). In this study, perfusion cultures were run at three BSPRs in the production phase. Low BSPR favored a growth arresting state that led to gradual increase in cell volume, which in turn led to an increase in net perfusion rate proportional to the increase in cell volume. Consequently, at low BSPR, while the cell viability and cell density decreased, high specific productivity of 55 pg per cell per day was achieved. In contrast, the specific productivity was lower in bioreactors operating at a high BSPR. The ability to modulate the cell metabolism by using BSPR was confirmed when the specific productivity increased after lowering the BSPR in one of the bioreactors that was initially operating at a high BSPR. This study demonstrated that BSPR significantly influenced cell growth, metabolism, and productivity in cultures with variable cell volumes.

DMEK Surgery at a Tertiary Hospital in Sweden. Results and Complication Risks.

Purpose: This study reports clinical outcomes up to 6 years after Descemet's membrane endothelial keratoplasty (DMEK) performed at the Department of Ophthalmology, Örebro University Hospital, Örebro, Sweden. Methods: The study has a cross-sectional and case series design. Inclusion criteria were all DMEK-operated eyes during 2013-2018 until repeat keratoplasty. Results: Altogether 162 eyes from 120 patients were enrolled. Among eyes without preoperative comorbidities, examined 1-6 years after DMEK, 85.8% achieved visual acuity of 0.1 logMAR or better. The median endothelial cell density (ECD) loss was 27% in a cohort of eyes examined 1-2 years post-DMEK, 31% at 2-3 years, 42% at 3-4 years, and > 60% at 4-6 years post-DMEK. ECD at the examination timepoint was correlated with donor ECD (as expected) and time since surgery. Conclusion: The results from DMEK surgeries in Örebro, Sweden, are promising. Further studies with even longer follow-up are needed to evaluate graft sustainability.

Corneal parameters in diabetics versus non-diabetics and correlation with various blood sugar parameters.

Aim: To compare corneal parameters in diabetics versus age-group-matched non-diabetics; also, to correlate these parameters with the duration of diabetes, glycated haemoglobin (HbA1c) levels, and severity levels of diabetic retinopathy (DR). Materials and methods: A comparative study was conducted at a tertiary eye-care center from January 2020 to December 2020. Two-hundred patients (400 eyes) with type-2 diabetes (100) and age-sex-matched non-diabetics (100) were included. Corneal morphological parameters like central corneal thickness (CCT), endothelial cell density (ECD), coefficient of variance (CoV), hexagonality (6A), and average cell area were recorded by specular microscopy. These parameters were correlated with the duration of diabetes, severity of disease based upon fasting blood glucose levels, HbA1c, and grade of DR. Mean and standard deviation were calculated, and regular distribution of continuous data was tested using independent sample t-test and ANOVA. Results: Mean ECD (2447.32 ± 269.89/mm2), 6A (45.03 ± 6.71%), and IOP (15.47 ± 2.02 mmHg) changed in diabetic cases and were significantly low in diabetics, whereas, mean average cell area (413 ± 50.19 mm2), standard deviation (167.05 ± 77.91), CCT (525.81 ± 36.69) and CoV (39.84 ± 15.59%), were significantly high in diabetics. Mean CCT had insignificant variation. Subgroup analysis within diabetics showed a statistically significant reduction of ECD, cell count, and 6A with increased duration of diabetes, poor glycaemic control, and raised HbA1c. Discussion: The corneal endothelial analysis is vital in daily clinical practice and provides valuable evidence concerning the viability of corneal endothelium in various intraocular surgeries. Uncontrolled DM harms the cornea with 70% of diabetics resulting in complications like keratopathy. The study highlighted that the increased duration of diabetes raised HbA1c, and poor glycemic control negatively affected corneal morphology. Our study showed a definite reduction in ECD and 6A in diabetics compared to non-diabetics. Conclusion: A definite reduction in the corneal endothelial counts, cell density, and hexagonality was found in type-2 diabetics compared to non-diabetics. Abbreviations: DM = Diabetes Mellitus, CCT = central corneal thickness, ECC = endothelial cell counts, ECD = endothelial cell density, CoV = coefficient of variance, 6A = hexagonality, DR = Diabetic retinopathy, SD = Standard of deviation, IOP = Intraocular pressure.

Parallel Multifactorial Process Optimization and Intensification for High-Yield Production of Live YF17D-Vectored Zika Vaccine.

The live-attenuated yellow fever 17D strain is a potent vaccine and viral vector. Its manufacture is based on embryonated chicken eggs or adherent Vero cells. Both processes are unsuitable for rapid and scalable supply. Here, we introduce a high-throughput workflow to identify suspension cells that are fit for the high-yield production of live YF17D-based vaccines in an intensified upstream process. The use of an automated parallel ambr15 microbioreactor system for screening and process optimization has led to the identification of two promising cell lines (AGE1.CR.pIX and HEKDyn) and the establishment of optimized production conditions, which have resulted in a >100-fold increase in virus titers compared to the current state of the art using adherent Vero cells. The process can readily be scaled up from the microbioreactor scale (15 mL) to 1 L stirred tank bioreactors. The viruses produced are genetically stable and maintain their favorable safety and immunogenicity profile, as demonstrated by the absence of neurovirulence in suckling BALB/c mice and consistent seroprotection in AG129 mice. In conclusion, the presented workflow allows for the rapid establishment of a robust, scalable, and high-yield process for the production of live-attenuated orthoflavivirus vaccines, which outperforms current standards. The approach described here can serve as a model for the development of scalable processes and the optimization of yields for other virus-based vaccines that face challenges in meeting growing demands.

Dataset of taxonomic identification from surface water in the coastal area of Peninsular Malaysia.

This article describes the abundance of phytoplankton community structures in Port Dickson, Negeri Sembilan and Pulau Tinggi, Johor during the Southwest and Northeast Monsoons and includes data from 48 selected sampling sites collected between July and December 2023. The seawater samples from 1-meter depth were obtained by using a Niskin water sampler, concentrated in a 50 ml centrifuge tube and immediately preserved with Lugol's iodine solution. The data include phytoplankton density (cell L-1), the total density of phytoplankton in each station, and the total number of genera obtained in every station. Additional data are presented, including chlorophyll-a concentration, as a proxy for biomass and photosynthetic active radiation. This article presents data on 30 genera, including unidentified genera, as well as the percentage of the main community group.

Comparison of automated corneal endothelial cell analysis in healthy and postoperative eyes with phakic intraocular lens: a cross-sectional study and literature review.

PURPOSE: Measurement of corneal endothelial cells is critical for postoperative evaluation of phakic intraocular lens (pIOL) surgery. However, inter-instrument differences in corneal endothelial cell density (ECD) after pIOL implantation have not yet been reported. This study aimed to compare automated corneal endothelial cell analysis between CellChek-20 (Konan Medical, Hyogo, Japan) and EM-4000 (Tomey, Nagoya, Japan) in healthy and postoperative eyes with pIOL. METHODS: We retrospectively analyzed 154 healthy and 236 postoperative eyes after pIOL surgery. Endothelial cell measurements were performed using CellChek-20 and EM-4000 with autofocusing and automated image analysis. ECD, percentage of hexagonal cells (HEX), coefficient of variation in cell size (CoV), and central corneal thickness (CCT) were compared between the two devices. RESULTS: The ECDs of the two devices were highly correlated in both healthy (Spearman's correlation coefficient [r] = 0.805; p < 0.001) and postoperative (r = 0.901; p < 0.001) groups. ECD from CellChek-20 was higher than EM-4000 in both healthy (mean difference = 228.9 cells/mm2; p < 0.001) and postoperative (mean difference = 115.6 cells/mm2; p < 0.001) groups. The CCT values also showed a strong correlation in healthy eyes (r = 0.974; p < 0.001) and in postoperative eyes (r = 0.936; p < 0.001); however, significant inter-instrument differences were observed. HEX and CV showed significant differences and relatively weak correlations (r < 0.7) between the two devices in both healthy and postoperative groups. CONCLUSION: The ECD values between the two instruments were correlated, but that of the CellChek-20 was significantly higher than that of the EM-4000 in both healthy and postoperative eyes after pIOL surgery. Most previous studies have also shown that the Konan software overestimated the ECD compared to other products in automatic measurement mode. The possibility of measurement bias should be considered when replacing equipment used for corneal endothelial cell measurements.

Dilute acid-assisted microbubbles-mediated ozonolysis of Eucheuma denticulatum phycocolloid for biobased L-lactic acid production.

Biobased L-lactic acid (L-LA) appeals to industries; however, existing technologies are plagued by limited productivity and high energy consumption. This study established an integrated process for producing macroalgae-based L-LA from Eucheuma denticulatum phycocolloid (EDP). Dilute acid-assisted microbubbles-mediated ozonolysis (DAMMO) was selected for the ozonolysis of EDP to optimize D-galactose recovery. Through single-factor optimization of DAMMO treatment, a maximum D-galactose recovery efficiency (59.10 %) was achieved using 0.15 M H2SO4 at 80 °C for 75 min. Fermentation with 3 % (w/v) mixed microbial cells (Bacillus coagulans ATCC 7050 and Lactobacillus acidophilus-14) and fermented residues achieved a 97.67 % L-LA yield. Additionally, this culture approach was further evaluated in repeated-batch fermentation and showed an average L-LA yield of 93.30 %, providing a feasible concept for macroalgae-based L-LA production.

Canine corneal endothelial cell analysis using vital dyes and light microscopy.

PURPOSE: To evaluate the use of vital dyes and light microscopy for assessing canine corneal endothelial morphology ex vivo. METHODS: The corneas of 40 canine eyes (n = 20 dogs) enucleated <24 h following euthanasia or death were isolated and flat-mounted on a slide. Corneal endothelium was stained via 0.25% trypan blue followed by 0.5% alizarin red (pH 4.2), photographed, then the following morphological features were calculated using ImageJ: mean cell density (MCD), mean cell area (MCA), polymegathism (coefficient of variation of cell area), and pleomorphism (% hexagonality). RESULTS: Mean ± standard deviation (range) outcomes were: MCD, 2544 ± 541 cells/mm2 (1750-3922 cells/mm2); MCA, 431 ± 97 µm2 (251-626 µm2); polymegathism, 17 ± 2% (14%-22%); pleomorphism, 84 ± 3% (80%-90%). No significant differences (p ≥ .122) were noted for any outcome between male versus female or brachycephalic versus non-brachycephalic dogs. Young dogs (<10 years) had lower MCA (p = .044), lower pleomorphism (p = .003), and higher MCD (p = .035) when compared to older dogs (≥10 years). Age was significantly (p ≤ .049) correlated with MCA (r = 0.467), MCD (r = -0.476), polymegathism (r = 0.444), and pleomorphism (r = 0.609). CONCLUSIONS: The combination of vital dyes and light microscopy allowed for clear visualization and evaluation of the corneal endothelium in canine eyes ex vivo. Our findings can be used in future studies to deepen our understanding of the corneal endothelium in health and disease.

An optimization by response surface methodology for the enhanced production of rMBSP from Pichia pastoris and study of its application.

Background: Recombinant myofibril-bound serine proteinase (rMBSP) was successfully expressed in Pichia pastoris GS115 in our laboratory. However, low production of rMBSP in shake flask constraints further exploration of properties.Methods: A 5-L high cell density fermentation was performed and the fermentation medium was optimized. Response surface methodology (RSM) was used to optimize the culture condition through modeling three selected parameter.Results: Under the optimized culture medium (LBSM, 1% yeast powder and 1% peptone) and culture conditions (induction pH 5.5, temperature 29 °C, time 40 h), the yield of rMBSP was 420 mg/L in a 5-L fermenter, which was a 6-fold increase over thar, expressed in flask cultivation. The desired enzyme was purified by two-step, which yielded a 33.7% recovery of a product that had over 85% purity. The activity of purified rMBSP was significantly inhibited by Ca2+, Mg2+, SDS, guanidine hydrochloeide, acetone, isopropanol, chloroform, n-hexane and n-heptane. Enzymatic analysis revealed a Km of 2.89 ± 0.09 µM and a Vmax of 14.20 ± 0.12 nM•min-1 for rMBSP. LC-MS/MS analysis demonstrated the specific cleavage of bovine serum albumin by rMPSP.Conclusion: These findings suggest that rMPSP has potential as a valuable enzyme for protein science research.