Electrical Heaters for Anti/De-Icing of Polymer Structures.

The problem of icing for surfaces of engineering structures requires attention more and more every year. Active industrialization in permafrost zones is currently underway; marine transport in Arctic areas targets new goals; the requirements for aerodynamically critical surfaces of wind generators and aerospace products, serving at low temperatures, are increasing; and fiber-reinforced polymer composites find wide applicability in these structural applications demanding the problem of anti/de-icing to be addressed. The traditional manufacturing approaches are superimposed with the new technologies, such as 3D printers and robotics for laying heat wires or cheap and high-performance Thermal Sprayed methods for metallic cover manufacturing. Another next step in developing heaters for polymer structures is nano and micro additives to create electrically conductive heating networks within. In our study, we review and comparatively analyze the modern technologies of structure heating, based on resistive heating composites.

Pseudo-Elasticity and Variable Electro-Conductivity Mediated by Size-Dependent Deformation Twinning in Molybdenum Nanocrystals.

Deformation twinning merits attention because of its intrinsic importance as a mode of energy dissipation in solids. Herein, through the atomistic electron microscopy observations, the size-dependent twinning mechanisms in refractory body-centered cubic molybdenum nanocrystals (NCs) under tensile loading are shown. Two distinct twinning mechanisms involving the nucleation of coherent and inclined twin boundaries (TBs) are uncovered in NCs with smaller (diameter < ≈5 nm) and larger (diameter > ≈5 nm) diameters, respectively. Interestingly, the ultrahigh pseudo-elastic strain of ≈41% in sub-5 nm-sized crystals is achieved through the reversible twinning mechanism. A typical TB cross-transition mechanism is found to accommodate the NC re-orientation during the pseudo-elastic deformation. More importantly, the effects of different types of TBs on the electrical conductivity based on the repeatable experimental measurements and first-principles calculations are quantified. These size-dependent mechanical and electrical properties may prove essential in advancing the design of next-generation flexible nanoelectronics.

The Variable Frequency Conductivity of Geopolymers during the Long Agieng Period.

The variable frequency conductivity was applied to characterize the process of solidification of geopolymers based on fly ash with sand additives. XRD qualitative and quantitative analysis, porosity measurements, and sorption analysis of specific surface area were performed. The conductivity was correlated with porosity and specific surface area of geopolymer concretes. Both values of conductivity, real and imaginary parts, decreased during polymerization processing time. Characteristic maximum on graphs describing susceptance vs. frequency curve was observed. The frequency of this maximum depends on time of polymerization and ageing, and can also indicate porosity of material. Low-porous geopolymer concrete shows both low-conductivity values, and susceptance maximum frequency peak occurs more in the higher frequencies than in high-porous materials.

An electro-conductive hybrid scaffold as an artificial Bruch's membrane.

Many research groups have investigated the various kinds of scaffolds to mimic the natural Bruch's membrane (BM) and support the retinal pigmented epithelial cells to form an organized cellular monolayer. While using prosthetic BM is identified as a promising treatment of age-related macular degeneration (AMD), a degenerative and progressive retinal disease, the effects of different signals such as electrical and morphological cues on the retinal pigmented epithelial (RPE) cells are still unknown. In this study, a laminated and conductive hydrogel/fiber composite scaffold by adding conductive polyaniline (PANi) to the scaffold's nanofibrous phase was prepared. This hybrid scaffold offers the closest morphology to the native structure of the human Bruch's membrane by imitating the inner and outer collagenous layer and induces the electrical signal to the scaffold to assess the electrical cue on behaviors of polarized retinal pigmented epithelial cells in the retina. The electrospun nanofibrous phase consisted of gelatin-Polyaniline in different ratios incorporated into the hydrogel precursor, a blend of gelatin and 4-armed PEG. We used a novel dual crosslinking process by incorporating the exposure of gamma irradiation and glutaraldehyde vapor treatment to construct the scaffold's hydrogel phase. The results showed the best composition was the sample which included the 40/60, Polyaniline/gelatin nanofiber sheets ratio because this scaffold revealed a 2.66 ± 0.33 MPa, Young's modulus and 1.84 ± 0.21 S/cm, electrochemical conductivity, which are close to the main features of native Bruch's membrane. In addition, this scaffold showed good biocompatibility by reaching 83.47% cell viability.

Soil salinity and moisture content under non-native Tamarix species.

This study investigated, soil salinity and moisture content under the exotic Tamarix in the Olifants River, South Africa, where they predominantly occur. Soil electro-conductivity (EC) was mapped using the electromagnetic induction (EMI) device (EM38 sensor), in three transects laid along the river from as close to the water source outward towards the bank of the River at 50 m apart. This was supported by three soil EC and moisture measurements from each of the three transects at a soil depth of 0-100 cm at intervals of 10 cm using soil EC meter and Amplitude Domain Reflectometry (ADR) sensor, respectively. The highest salt concertation (3,000 mS/m or 19,500 ppm) was found at a depth of 30-40 cm under the dense Tamarix species. The highest soil moisture (20-40%) was also found at the same depth under the Tamarix, suggesting a hydraulic lift of water to the top 30-40 cm, where the Tamarix fine roots for water absorption occur. It also confirms that the distance from water point and Tamarix plant density affect salt leaching depth and amount of litter decomposition, respectively, which is the main source of salt deposition in soil.