Triflic acid-promoted Friedel-Crafts-type carbocyclization of alkenylated biphenyl derivatives: Synthesis and photophysical studies of novel 9,10-dihydrophenanthrenes.

An efficient metal-free, triflic acid-promoted intramolecular Friedel-Crafts-type carbocyclization of alkenylated biphenyl derivatives is discussed. This method provides an elegant route for the construction of 9,10-dihydrophenanthrenes of biological significance in good to excellent yields. The carbocyclization reaction is likely to proceeds via activation of terminal C[bond, double bond]C bond of alkenylated biphenyl derivatives followed by subsequent aromatic electrophilic substitution to give desired carbocyclic products. Single crystal X-ray diffraction analysis of compound 10d revealed that the crystals are packed in AB-AB layer packing, where the molecules are aligned in anti-parallel fashion. Notably, all of the synthesized 9,10-dihydrophenanthrenes exhibited blue to greenish yellow fluorescence with λ max = 418-481 nm range. The stokes shift, quantum yield and optical band gap of tricyclic products were computed using their absorption and emission spectra. A significant positive solvatochromic effect was observed for 9,10-dihydrophenanthrene derivative 10l, which is a characteristic of ICT interactions.

Competing electrophilic substitution and oxidative polymerization of arylamines with selenium dioxide.

This article describes the detailed analysis of the reaction between arylamines, such as aniline, o-anisidine, and methyl anthranilate, with selenium dioxide in acetonitrile. A systematic analysis of the reaction products with the help of 77Se NMR and single-crystal X-ray crystallography revealed that the reaction progress follows three major reaction pathways, electrophilic selenation, oxidative polymerization, and solvent oxidation. For aniline and o-anisidine, predominant oxidative polymerization occurred, leading to the formation of the respective polyaniline polymers as major products. For methyl anthranilate, the oxidative polymerization was suppressed due to the delocalization of amine lone pair electrons over the adjacent carboxylate function, which prompted the selenation pathway, leading to the formation of two of the isomeric diorganyl selenides of methyl anthranilate. The diaryl selenides were structurally characterized using single-crystal X-ray diffraction. Density functional theory calculations suggest that the highest occupied molecular orbital of methyl anthranilate was deeply buried, which suppressed the oxidative polymerization pathway. Due to solvent oxidation, oxamide formation was also noticed to a considerable extent. This study provides that utmost care must be exercised while using SeO2 as an electrophile source in aromatic electrophilic substitution reactions.

Chemo-and regioselective aqueous phase, co-acid free nitration of aromatics using traditional and nontraditional activation methods.

Electrophilic aromatic nitrations are used for the preparation of a variety of synthetic products including dyes, agrochemicals, high energy materials, fine chemicals and pharmaceuticals. Traditional nitration methods use highly acidic and corrosive mixed acid systems which present a number of drawbacks. Aside from being hazardous and waste-producing, these methods also often result in poor yields, mostly due to low regioselectivity, and limited functional group tolerance. As a consequence, there is a need for effective and environmentally benign methods for electrophilic aromatic nitrations. In this work, the major aim was to develop reaction protocols that are more environmentally benign while also considering safety issues. The reactions were carried out in dilute aqueous nitric acid, and a broad range of experimental variables, such as acid concentration, temperature, time, and activation method, were investigated. Mesitylene and m-xylene were used as test substrates for the optimization. While the optimized reactions generally occurred at room temperature without any activation under additional solvent-free conditions, slight adjustments in acid concentration, stoichiometric equivalents, and volume were necessary for certain substrates, in addition to the activation. The substrate scope of the process was also investigated using both activated and deactivated aromatics. The concentration of the acid was lowered when possible to improve upon the safety of the process and avoid over-nitration. With some substrates we compared traditional and nontraditional activation methods such as ultrasonic irradiation, microwave and high pressure, respectively, to achieve satisfactory yields and improve upon the greenness of the reaction while maintaining short reaction times.

Transformation of chlorobenzene by Mn(III) generated in MnO2/organic acid systems.

Chlorobenzene (CB) is a prevalent organic contaminant in water and soil environments. It presents high chemical stability and is resistant to both oxidation and reduction. In this study, we showed that CB was substantially removed by soluble Mn(III) produced during the reductive dissolution of colloidal MnO2 by naturally-occurring organic acids such as formate (FOR), oxalate (OX), and citrate (CIT). The removal rate was dependent on the physicochemical properties of organic acids. With strong electron-donating and coordination ability, OX and CIT promoted MnO2 dissolution and Mn(III) generation compared to FOR, but had adverse effects on the stability and reactivity of Mn(III). As a result, CB removal followed the order: MnO2/CIT > MnO2/FOR > MnO2/OX. Analysis of the transformation products showed that Mn(III) complexes acted as strong electrophiles, attacking the ortho/para carbons of the benzene ring and transforming CB to chlorophenols via an electrophilic substitution mechanism. The theoretical foundation of this proposed reaction mechanism was supplemented by quantum mechanical calculations. Together, the findings of this study provide new insights into the transformation of CB in natural environments and hold the potential to offer a novel strategy for the development of manganese oxide/ligand systems for CB elimination.

Electrophilic Functionalization of a Hexaphosphabenzene Ligand in [(Cp*Mo)2(µ,η6 : 6-P6)].

The electrophilic functionalization of the triple-decker sandwich complex [{Cp*Mo}2(µ,η6:6-P6)] (A) and its mono-oxidized counterpart [{Cp*Mo}2(µ,η6:6-P6)][SbF6] (B) with reactive main-group electrophiles as well as radical scavengers is shown to be a reliable method for the selective functionalization of the hexaphosphabenzene ligand. Depending on the electrophile used, the regioselectivity of the functionalization can be adjusted. Using group 16 electrophiles, the trisubstituted compounds [{Cp*Mo}2{(µ,η3 : 3-P3)(µ,η1 : 1 : 1 : 1-1,3-(SePh)2-2-Br-P3)}][TEF] (1), [{Cp*Mo}2(µ,η3 : 3-P3)(µ,η1 : 1 : 1 : 1-1,2,3-(EPh)3-P3)][SbF6] (E=S (2), Se (3)) as well as the side product [{Cp*Mo}2(µ,η4:4-P4)(µ,η1 : 1-P(SPh)2)][SbF6] (4) are obtained. By switching to phosphenium ions as group 15 electrophiles, the ring-inserted products [{Cp*Mo}2(µ,η3 : 3 : 2 : 2-P7R2)][TEF] (R=Cy (5), iPr (6)) are isolated, showing an unprecedented P7R2 structural motif. Furthermore, the reaction with MeOTf yields the dimeric [{Cp*Mo}4(1,4-Me2-µ4,η1 : 1 : 1 : 1 : 1 : 1-P6)(µ,η3 : 3-P3)2][TEF]2 (7) as the first example of a complex featuring two interconnected cyclo-P6 middle deck ligands. Finally, by combination of the methylation step with Ph2Se2, the mixed group 14/16 complex [{Cp*Mo}2{(µ,η3 : 3-P3)(µ,η1 : 1 : 1 : 11,2-(SePh)2-3-Me-P3)}][OTf] (8) is obtained.

Supramolecular Polymer Network based on Electrophilic Substitution (ES) Adduct of Furan-Triazolinedione.

Polymers with furan functionality have been the subject of extensive research on developing sustainable materials applying a limited number of dynamic covalent approaches. Herein, we introduce a facile, dynamic non-covalent approach to make a furan polymer readily accessible for self-healing applications based on its electrophilic substitution (ES) with a commercially available 1,2,4-triazoline-3,5-dione (TAD) derivative, 4-phenyl-TAD (PTAD). A tailor-made furan polymer, poly(furfuryl methacrylate) (PFMA), considering it an initial illustrative example, was rapidly ES modified with PTAD to produce furfuryl-tagged triazolidine that subsequently associated via inter-molecular hydrogen (H-) bonding to produce a thermally reversible supramolecular polymer network under ambient conditions. The H-bonded network was experimentally quantified via ATR-IR analysis and theoretically rationalized via the density functional theory (DFT) study using smaller organic model compounds analogous to the macromolecular system. Thermoreversible feature of the H-bonded triazolidine-derived supramolecular polymer network enabled the solution reprocessing and self-healing of the polymer material.

Through-Space, Lone-Pair Promoted Aromatic Substitution: A Relay Mechanism Can Beat Out Direct Activation.

We report a detailed experimental and theoretical analysis of through-space arene activation with halogens, tetrazoles and achiral esters and amides. Contrary to previously assumed direct activation through σ-complex stabilization, our results suggest that these reactions proceed by a relay mechanism wherein the lone pair-containing activators form exothermic π-complexes with electrophilic nitronium ion before transferring it to the probe ring through low barrier transition states. Noncovalent interactions (NCI) plots and Quantum Theory of Atoms in Molecules (QTAIM) analyses depict favorable interactions between the Lewis base (LB) and the nitronium ion in the precomplexes and the transition states, suggesting directing group participation throughout the mechanism. The regioselectivity of substitution also comports with a relay mechanism. In all, these data pave the way for an alternate platform of electrophilic aromatic substitution (EAS) reactions.

Base-Mediated Radio-Iodination of Arenes by Using Organosilane and Organogermane as Radiolabelling Precursors.

The radio-iodination of arenes is investigated from organosilane and organogermane precursors using ipso-electrophilic halogenation (IEH). Discovery of a mild base mediated process allows radio-iodination in HFIP (1,1,1,3,3,3-hexafluoro-2-propanol) of either aryl silane or germane, with germanes being more reactive. Clinical potential of arylgermanes as radio-iodination precursors is demonstrated through the labelling of [125 I]IMTO (iodometomidate) and [125 I]MIBG (meta-iodobenzylguanidine) thus offering an alternative to radio-iododestannylation processes using non-toxic precursors.

Borylation Directed Borylation of Indoles Using Pyrazabole Electrophiles: A One-Pot Route to C7-Borylated-Indolines.

Pyrazabole (1) is a readily accessible diboron compound that can be transformed into ditopic electrophiles. In 1 (and derivatives), the B⋅⋅⋅B separation is ca. 3 Å, appropriate for one boron centre bonding to N and one to the C7 of indoles and indolines. This suitable B⋅⋅⋅B separation enables double E-H (E=N/C) functionalisation of indoles and indolines. Specifically, the activation of 1 with HNTf2 generates an electrophile that transforms N-H indoles and indolines into N/C7-diborylated indolines, with N-H borylation directing subsequent C7-H borylation. Indole reduction to indoline occurs before C-H borylation and our studies indicate this proceeds via hydroboration-C3-protodeboronation to produce an intermediate that then undergoes C7 borylation. The borylated products can be converted in situ into C7-BPin-N-H-indolines. Overall, this represents a transient directed C-H borylation to form useful C7-BPin-indolines.

Transition-Metal-Free Heterocyclic Carbon-Boron Bond Formation.

Heteroaryl boronic acids and esters are extremely important and valuable intermediates because of their wide application in the synthesis of marketed drugs and bioactive compounds. Over the last couple of decades, the construction of highly important heteroaryl carbon-boron bonds has created huge attention. The transition-metal-free protocols are more green, less sensitive to air and moisture, and also economically advantageous over the transition-metal-based protocols. The transition-metal-free C-H borylation of heteroarenes and C-X (X=halogen) borylation of heteroaryl halides represents an excellent approach for their synthesis. Also, various cyclization and alkyne activation protocols have been recently established for their synthesis. The goal of this review article is to summarize the existing literature and the current state of the art for transition-metal-free synthesis of heteroaryl boronic acid and esters.

Synthesis of Spirocyclic Cyclobutenes through Desulfinative Spirocyclisation of gem-Bis(triflyl)cyclobutenes.

A two-step synthesis of less accessible spiro[cyclobutene-1,9'-fluorene] compounds from biaryl-alkynes and 2-(2-fluoropyridin-1-ium-1-yl)-1,1-bis((trifluoromethyl)sulfonyl)ethan-1-ide, which serves as a potent precursor for outstandingly electrophilic Tf2 C=CH2 , has been developed. This synthetic methodology includes selective formation of gem-bis(triflyl)cyclobutenes from biaryl-alkynes and Tf2 C=CH2 followed by desulfinative spirocyclisation mediated by 1,1,1,3,3,3-hexafluoroisopropyl alcohol (HFIP). Besides, on the basis of the chameleonic reactivity of sulfone functionality, several derivatisations of triflylated spiro[cyclobutene-1,9'-fluorene] products have been successfully achieved.

Two Directing Groups Used for Metal Catalysed Meta-C-H Functionalisation Only Effect Ortho Electrophilic C-H Borylation.

Two templates used in meta-directed C-H functionalisation under metal catalysis do not direct meta-C-H borylation under electrophilic borylation conditions. Using BCl3 only Lewis adduct formation with Lewis basic sites in the template is observed. While combining BBr3 and the template containing an amide linker only led to amide directed ortho C-H borylation, with no pyridyl directed meta borylation. The amide directed borylation is selective for the ortho borylation of the aniline derived unit in the template, with no ortho borylation of the phenylacetyl ring - which would also form a six membered boracycle - observed. In the absence of other aromatics amide directed ortho borylation on to phenylacetyl rings can be achieved. The absence of meta-borylation using two templates indicates a higher barrier to pyridyl directed meta borylation relative to amide directed ortho borylation and suggests that bespoke templates for enabling meta-directed electrophilic borylation may be required.

Role of hypobromous acid in the transformation of polycyclic aromatic hydrocarbons during chlorination.

Hypobromous acid (HOBr), a highly reactive active species, can be formed and impact reaction processes with organic pollutants in source water during chlorination disinfection of the water containing bromide (Br-). In this study, we investigated the transformation kinetics of 10 parent polycyclic aromatic hydrocarbons (PAHs) and formation mechanisms of transformation products in the presence of Br- during chlorination. The results indicated that HOBr can accelerate the processes of electrophilic substitution (ES) and single electron transfer (ET) reactions in PAHs, and the second-order rate constants of HOBr are 102-103 times higher than those of hypochlorous acid (HOCl) with PAHs. HOBr was more conductive to induce ES reactions than HOCl. In water containing Br-, HOBr and HOCl dominate the reaction processes with PAHs, although other active bromine species may still affect reaction processes. In terms of transformation products, higher reactivity of HOBr results from faster formation of oxygenated PAHs (OPAHs) and halogenated PAHs (HPAHs) than HOCl. As an example of 3 model PAHs, anthracene transforms faster to its oxygenated products at a higher concentration, while pyrene and fluorene transform faster to halogenated products. These fundamental results were essential to understanding the transformation kinetics of PAHs and the formation of toxic disinfection by-products in the presence of Br-.

Ionic Liquid-Assisted Grinding: An Electrophilic Fluorination Benchmark.

We demonstrated the influence of liquid additives on the rate and selectivity of mechanochemical fluorination of aromatic and 1,3-dicarbonyl compounds with F-TEDA-BF4. Substoichiometric catalytic quantities of ionic liquids speed up the reaction. We proposed an improved protocol for ionic liquids-assisted fluorination that allows easy and efficient isolation of fluorinated products by vacuum sublimation. A careful choice of additive results in high yields of fluorinated products and low E-factor for the overall process. Here, we report a benchmarking study of various ionic liquids in comparison with representative molecular solvents. A lower viscosity of ionic liquid additive is typically associated with higher yields and a higher degree of difluorination. Ionic liquids with fluorous anions (triflate and triflimide) are shown to be the most efficient catalysts for ionic liquid-assisted grinding.

Synthesis of Polycyclic Aromatic Hydrocarbons Decorated by Fluorinated Carbon Acids/Carbanions.

The carboarylation reaction of biphenyl-alkynes was successfully triggered by electrophilic attack of 1,1-bis(triflyl)ethylene on the alkyne moiety to give polycyclic aromatic hydrocarbons (PAHs) decorated by superacidic carbon acid functionality. Neutralisation of thus obtained acids with NaHCO3 yielded the corresponding sodium salts, which showed improved solubility in both aqueous and organic solvents.

The Dimethylbismuth Cation: Entry Into Dative Bi-Bi Bonding and Unconventional Methyl Exchange.

The isolation of simple, fundamentally important, and highly reactive organometallic compounds remains among the most challenging tasks in synthetic chemistry. The detailed characterization of such compounds is key to the discovery of novel bonding scenarios and reactivity. The dimethylbismuth cation, [BiMe2 (SbF6 )] (1), has been isolated and characterized. Its reaction with BiMe3 gives access to an unprecedented dative bond, a Bi→Bi donor-acceptor interaction. The exchange of methyl groups (arguably the simplest hydrocarbon moiety) between different metal atoms is among the most principal types of reactions in organometallic chemistry. The reaction of 1 with BiMe3 enables an SE 2(back)-type methyl exchange, which is, for the first time, investigated in detail for isolable, (pseudo-)homoleptic main-group compounds.

Development of the Peripheral Functionalization Chemistry of meso-Free Corroles.

In contrast to the extensive development of the meso-functionalization of porphyrins, that of corroles had rarely been explored until the development of practical synthetic methods for meso-free corroles in 2015. The ready availability of meso-free corroles opened up meso-functionalization chemistry of corroles, giving rise to successful synthesis of various meso-substituted corroles such as meso-halogen, meso-nitro, meso-amino, meso-oxo, and meso-iminocorroles as well as meso-meso-linked corrole dimers and corrole tapes. In some cases, 2NH corroles exist as stable or transient radical species. The impact of meso-functionalization on the structures, electronic properties, optical characteristics, and aromaticity of corroles are highlighted in this Minireview.

Aminotroponiminates: Impact of the NO2 Functional Group on Coordination, Isomerisation, and Backbone Substitution.

Aminotroponiminate (ATI) ligands are a versatile class of redox-active and potentially cooperative ligands with a rich coordination chemistry that have consequently found a wide range of applications in synthesis and catalysis. While backbone substitution of these ligands has been investigated in some detail, the impact of electron-withdrawing groups on the coordination chemistry and reactivity of ATIs has been little investigated. We report here Li, Na, and K salts of an ATI ligand with a nitro-substituent in the backbone. It is demonstrated that the NO2 group actively contributes to the coordination chemistry of these complexes, effectively competing with the N,N-binding pocket as a coordination site. This results in an unprecedented E/Z isomerisation of an ATI imino group and culminates in the isolation of the first "naked" (i. e., without directional bonding to a metal atom) ATI anion. Reactions of sodium ATIs with silver(I) and tritylium salts gave the first N,N-coordinated silver ATI complexes and unprecedented backbone substitution reactions. Analytical techniques applied in this work include multinuclear (VT-)NMR spectroscopy, single-crystal X-ray diffraction analysis, and DFT calculations.

Isolation of an Antiaromatic 9-Hydroxy Fluorenyl Cation.

Fluorenyl cations are textbook examples of 4π electron antiaromatic five-membered ring systems. So far, they were reported only as short-lived intermediates generated under superacidic conditions or by flash photolysis. Attempts to prepare a m-terphenyl acylium cation by fluoride abstraction from a benzoyl fluoride gave rise to an isolable 9-hydroxy fluorenyl cation that formed by an intramolecular electrophilic attack at a flanking mesityl group prior to a 1,2-methyl shift and proton transfer to oxygen.

Eco-Friendly Methodology for the Formation of Aromatic Carbon-Heteroatom Bonds by Using Green Ionic Liquids.

A new sustainable method is reported for the formation of aromatic carbon-heteroatom bonds under solvent-free and mild conditions (no co-oxidant, no strong acid and no toxic reagents) by using a new type of green ionic liquid. The bromination of methoxy arenes was chosen as a model reaction. The reaction methodology is based on only using natural sodium bromine, which is transformed into an electrophilic brominating reagent within an ionic liquid, easily prepared from the melted salt FeCl3 hexahydrate. Bromination reactions with this in-situ-generated reagent gave good yields and excellent regioselectivity under simple and environmentally friendly conditions. To understand the unusual bromine polarity reversal of sodium bromine without any strong oxidant, the molecular structure of the reaction medium was characterised by Raman and direct infusion electrospray ionisation mass spectroscopy (ESI-MS). An extensive computational investigation using density functional theory methods was performed to describe a mechanism that suggests indirect oxidation of Br- through new iron adducts. The versatility of the methodology was successively applied to nitration and thiocyanation of methoxy arenes using KNO3 and KSCN in melted hexahydrated FeCl3 .