Shape variation in the limb long bones of modern elephants reveals adaptations to body mass and habitat.

During evolution, several vertebrate lineages have shown trends towards an increase in mass. Such a trend is associated with physiological and musculoskeletal changes necessary to carry and move an increasingly heavy body. Due to their prominent role in the support and movement of the body, limb long bones are highly affected by these shifts in body mass. Elephants are the heaviest living terrestrial mammals, displaying unique features allowing them to withstand their massive weight, such as the columnarity of their limbs, and as such are crucial to understand the evolution towards high body mass in land mammals. In this study, we investigate the shape variation of the six limb long bones among the modern elephants, Elephas maximus and Loxodonta africana, to understand the effect of body mass and habitat on the external anatomy of the bones. To do so, we use three-dimensional geometric morphometrics (GMMs) and qualitative comparisons to describe the shape variation, at both the intraspecific and interspecific levels. Our results reveal that the two species share similar negative ontogenetic allometric patterns (i.e. becoming stouter with increased length) in their humerus and femur, but not in the other bones: the proximal epiphyses of the stylopod bones develop considerably during growth, while the distal epiphyses, which are involved in load distribution in the elbow and knee joints, are already massive in juveniles. We attribute this pattern to a weight-bearing adaptation already present in young specimens. Among adults of the same species, bone robustness increases with body mass, so that heavier specimens display stouter bones allowing for a better mechanical load distribution. While this robustness variation is significant for the humerus only, all the other bones appear to follow the same pattern. This is particularly visible in the ulna and tibia, but less so in the femur, which suggests that the forelimb and hindlimb adapted differently to high body mass support. Robustness analyses, while significant for the humerus only, suggest more robust long bones in Asian elephants than in African savanna elephants. More specifically, GMMs and qualitative comparisons indicate that three bones are clearly distinct when comparing the two species: in E. maximus the humerus, the ulna and the tibia display enlarged areas of muscular insertions for muscles involved in joint and limb stabilization, as well as in limb rotation. These results suggest a higher limb compliance in Asian elephants, associated with a higher dexterity, which could be linked to their habitat and foraging habits.

Descripción morfométrica de la anatomía externa e interna del Ambystoma mexicanum / Morphometric description of the external and internal anatomy of Ambystoma mexicanum

RESUMEN: El Ambystoma mexicanum o comúnmente llamado axolote, es un anfibio miembro del género Ambystoma que comprende 32 especies presentes desde el sur de Canadá hasta la región central de México. Actualmente esta especie se encuentra en peligro de extinción debido a cambios fisicoquímicos en su medio ambiente y la depredación por organismos introducidos en su hábitat. Dentro de las múltiples estrategias para su conservación se encuentran el desarrollo de programas de investigación, educación y desarrollo del manejo clínico. El objetivo del presente trabajo estuvo enfocado en obtener y analizar datos morfométricos acompañados por una descripción de la anatomía externa e interna de la especie Ambystoma mexicanum con el propósito de contribuir a su conservación. Por lo anterior, cinco ejemplares de la especie Ambystoma mexicanum de 2 años, criados en cautiverio, fueron estudiados para obtener valores morfométricos externos e internos utilizando un calibrador vernier, balanzas analíticas y rayos X. Los resultados de la observación externa mostraron el dimorfismo sexual característico de estas especies presentes en la zona peri cloacal, además, el análisis radiográfico permitió observar y señalar algunas estructuras óseas del esqueleto axial y apendicular. Los ejemplares presentaron un peso promedio de 31,6 g y una longitud de 15,7 cm. Los miembros anteriores mostraron una longitud de 2,92 cm y 2,8 cm en los miembros posteriores. El análisis de los órganos internos mostró que el corazón tiene un peso de 0,036 g y una longitud de 0,75 cm, los pulmones un peso de 0,019 g y una longitud de 2,6 cm, el estómago arrojó una longitud de 4,86 cm y el intestino 10,88 cm. En conclusión, los valores presentados en el presente trabajo sirven de referencia en futuros trabajos de investigación clínica veterinaria y manejo zootécnico del axolote para su conservación y preservación.

SUMMARY: The Ambystoma mexicanum commonly known as axolotl, is an amphibian and member of the genus Ambystoma which includes 32 species that can be found from southern Canada to central Mexico. Currently this species is in danger of extinction due to physicochemical changes in its environment and predation by organisms introduced into its habitat. Among the multiple strategies to aid in its conservation are the development of research programs, education and development of clinical management. The objective of this work is focused on obtaining and analyzing morphometric data accompanied by a description of the external and internal anatomy of the species Ambystoma mexicanum with the purpose of contributing to the conservation of this species. Therefore, five 2-year-old specimens of the Ambystoma mexicanum species, raised in captivity, were studied to obtain external and internal morphometric values using a vernier caliper, analytical balances and X-rays. The results of external observation showed the characteristic sexual dimorphism of these species present in the pericloacal zone. Furthermore, the radiographic analysis allowed to observe and point out some bony structures of the axial and appendicular skeleton. The specimens presented an average weight of 31.60 g and a length of 15.70 cm. The forelimbs showed a length of 2.92 cm and 2.8 cm in the hindlimbs. Analysis of the internal organs showed that the heart had a weight of 0.036 g and a length of 0.75 cm, the lungs a weight of 0.019 g and a length of 2.6 cm, the stomach had a length of 4.86 cm and the intestine 10.88 cm. In conclusion, the values presented in this work serve as a reference for future veterinary clinical research and zootechnical management of the axolotl for its conservation and preservation.

A new gastropod associated with a deep-sea whale carcass from São Paulo Ridge, Southwest Atlantic.

An unfamiliar gastropod was collected from a deep-sea whale carcass at the base of the São Paulo Ridge in the Southwest Atlantic by the manned research submersible Shinkai 6500, and is here described as a new species of the abyssochrysoidean genus Rubyspira, R. brasiliensis sp. nov., following morphological and molecular phylogenetic examinations. There are only two other known species in the genus, which occur together in the Monterey Submarine Canyon off California. The present new species was shown by the molecular analysis to be closer to one of the Californian species than the other. It was found aggregated on and around a whale carcass at a depth of 4204 m, which represents the deepest record of whale- fall ecosystems ever discovered.

Eye, nose, hair, and throat: external anatomy of the head of a neonate gray whale (Cetacea, Mysticeti, Eschrichtiidae).

Information is scarce on gray whale (Eschrichtius robustus) anatomy and that of mysticetes in general. Dissection of the head of a neonatal gray whale revealed novel anatomical details of the eye, blowhole, incisive papilla with associated nasopalatine ducts, sensory hairs, and throat grooves. Compared to a similar sized right whale calf, the gray whale eyeball is nearly twice as long. The nasal cartilages of the gray whale, located between the blowholes, differ from the bowhead in having accessory cartilages. A small, fleshy incisive papilla bordered by two blind nasopalatine pits near the palate's rostral tip, previously undescribed in gray whales, may be associated with the vomeronasal organ, although histological evidence is needed for definitive identification. Less well known among mysticetes are the numerous elongated, stiff sensory hairs (vibrissae) observed on the gray whale rostrum from the ventral tip to the blowhole and on the mandible. These hairs are concentrated on the chin, and those on the lower jaw are arranged in a V-shaped pattern. We confirm the presence of two primary, anteriorly converging throat grooves, confined to the throat region similar to those of ziphiid and physeteroid odontocetes. A third, shorter groove occurs lateral to the left primary groove. The throat grooves in the gray whale have been implicated in gular expansion during suction feeding.

Análise da anatomia externa no primeiro molar superior por meio da tomografia computadorizada cone beam / Analysis of external anatomy of maxillary firstmolar evaluated by cone beam computed tomography

Introdução: O sucesso no tratamento endodôntico é conseguido após uma limpeza completa seguida de obturação em toda a extensão dos canais radiculares. Dessa forma, estar familiarizado com as variações anatômicas é muito importante para a completa limpeza dos canais radiculares. Objetivo: Avaliou-se a anatomia externa nos molares superiores, bem como a capacidade da tomografia computadorizada cone beam no diagnóstico dessas variações. Material e métodos: Analisaramse 50 molares superiores de 37 pacientes submetidos à tomografia computadorizada cone beam. Resultados: Foram encontrados 49 dentes com três raízes e apenas um dente com quatro raízes (duas vestibulares e duas palatinas). Conclusão: A freqüência da presença de duas raízes palatinas, apesar de baixa, deve ser considerada. A tomografia computadorizada cone beam mostrou-se eficaz no diagnóstico da morfologia externa dos canais radiculares e muito útil na endodontia.

Introduction: The success in endodontic treatment is obtained after thorough cleaning followed by filling the whole length of root canals. Thus, knowledge on variations in the systems of root canals is very important for cleanness of the root canals. Objective: Evaluate the frequency of two palatal roots in the maxillary first molar as well as the capacity of cone beam computed tomography in diagnosed of this variation. Material and methods: Fifty maxillary first molars were evaluated in 37 patients using cone beam computed tomography. Results: It was found only one tooth (2%) with two palatal roots with 4 roots and 5 canals. Conclusion: The frequency of two palatal roots is low, however it must be considered. Cone beam computed tomography showed effective in diagnosed of morphology of root canals and very useful in Endodontics.