Tuning stability, rheology, and fire-extinguishing performance of advanced firefighting foam material by inorganic nanoparticle flame retardants.

HYPOTHESIS: Nanoparticle-stabilized foams are extremely stable, and flame retardant inorganic nanoparticles should be able to add sealing capacity of firefighting foams on flammable liquid fuels, and hence enhance fire extinguishment performance on liquid fuel fire. In practice, how do flame retardant nanoparticles resist the destructive effect of oil molecules on foam and tune foam properties? EXPERIMENTS: We have prepared a nanoparticle-enhanced foam comprising of hydrocarbon surfactant, short-chain fluorocarbon surfactant, and nanoparticles. The interactions among nanoparticles and surfactant molecules were characterized by using dynamic surface tension and conductivity. Stability, rheology, and oil resistivity on liquid fuel of the nanoparticle-enhanced foam were evaluated systematically. Fire suppression effectiveness of the foams was verified based on a standard experiment. FINDINGS: Foam stability and oil resistivity were enhanced due to self-assembled network structures formed by jammed aggregates composed by nanoparticles and surfactants in Plateau borders and bubble films, providing structural recoverability and enhanced viscoelasticity within foam. Foams containing nano-SiO2, nano-CaCO3, nano-Al(OH)3, and nano-Mg(OH)2 show difference in fire extinguishment due to different ability to enhance foam properties. Foam containing nano-Al(OH)3 shows the strongest adaptation and could shorten fire extinguishing time by 2 times and prolong burn-back time by 2.3 times compared with commercial product.

Assessment of parameters reflecting the reactivity of the autonomic nervous system of Polish firefighters on the basis of a test in a smoke chamber.

Objective: Measurement and analysis of heart rate variability in a population of professional firefighters based on heart rate (RR) recording. Assessment based on a smoke chamber test in correlation with age, length of service, body mass index. Materials and methods: The smoke chamber test for the officers of the State Fire Service (SFS) is aimed at improving the skills and techniques of working in special clothing and in a respiratory protection set (RPS) under high psychophysical burden. The study was divided into 3 stages: 1. measurement of parameters at rest - sitting position for 5 min, 2. measurement of parameters during the firefighter's activity, effort related to the training path and the test in the smoke chamber, indefinite time (different for each firefighter), 3. measurement of parameters at rest after exercise - sitting position for 5 min. Each firefighter included in the study had fitted onto his chest a Polar H10 band with a sensor (size XXL) that measures parameters HR, HRV (sensor connected via Bluetooth to an application on the phone of a person controlling the test). Results: The study involved 96 firefighters aged 19-45 (Mean 27.9; SD 7.4), with 1-19 years of service (Mean 5.2; SD 4.6). The study included 75 firefighters who completed the entire activity and their results were recorded completely in a way that allowed for analysis and interpretation. Results of 17 firefighters were selected (parameters describing HRV changes was carried out, which are important from the authors' experience: RMSSD, HF ms2, DFA α1). Conclusion: The presence of excessive body weight did not affect HR parameters, which may be related to the limited possibilities of using the BMI index among people with high muscle mass. Longer work experience has a health-promoting effect on heart rate values through increased adaptation of the circulatory system to increased effort and stress. HRV parameter and ANS activity have a wide range of clinical applications, in addition to monitoring health status in the course of diseases, ANS activity can be analyzed in correlation with occupational risk factors.

Evaluation of self-contained breathing apparatus (SCBA) weight on firefighter stamina, comfort, and postural stability.

Firefighters wear personal protective equipment to protect them from the thermal and chemical environment in which they operate. The self-contained breathing apparatus (SCBA) provides isolation of the airway from the hazardous fireground. National standards limit SCBA weight, however, integration of additional features could result in an SCBA exceeding the current limit. The purpose of this study was to examine the effects of increased SCBA weight on firefighters' physiological responses, work output, dynamic stability, and comfort. Completion of simulated firefighting activities induced a strong physiological response. Peak oxygen consumption was higher with the lightest SCBA than the heaviest SCBA. Few other physiological differences were noted as SCBA weight increased. Importantly, increased SCBA weight resulted in significantly more negative perceptions by the firefighters and a trend towards significance for the duration of work time prior to reaching volitional fatigue. These results should be considered when assessing changes to existing SCBA weight limits.

Increased SCBA weight above existing national standards resulted in negative perceptions by the firefighters, but not significant physiological changes after two simulated bouts of firefighting activity. SCBA weight had a nearly significant impact on the time firefighters worked before reaching volitional fatigue, with heavier SCBA trending towards decreased working time.

Firefighters' muscle activity change during firefighting training program.

BACKGROUND: Research on muscle activity to reduce injuries during firefighting training has getting increasing attention. OBJECTIVE: The purpose of this study was to assess the activity changes in nine muscles of firefighters during the seven firefighting training programs, and to analyze the influence of different firefighting training programs on muscle activity. METHODS: Ten healthy male firefighters were recruited to measure the field surface electromyographic activities (including the percentage of Maximum Voluntary Contraction electromyography (% MVC) and the integrated electromyography value (iEMG)) during all the firefighting training programs. RESULTS: The results showed that the electromyographic activity of gastrocnemius (GA) was stronger in climbing the hooked ladder and climbing the six-meter long ladder training programs. Arms, shoulders, and lower limb muscles were more activated, myoelectric activities were more intense, and fatigue in these areas was more likely to occur during climbing five-story building with loads. Compared with other muscles, erector spine (ES) had a higher degree of activation during different postures of water shooting. The Borg scale scores of shoulders, trunk, thighs and calves were also higher. CONCLUSION: After completing all training programs, GA, tibialis anterior (TA), trapezius (TR), and ES were strongly activated, and all muscles had obvious force. The % MVC and iEMG analyses correspond well with the Borg Scale score. The results can provide certain reference for reducing the musculoskeletal injury of firefighters, carrying out scientific training and formulating effective injury prevention measures for them.

Firefighter uncompensable heat stress results in excessive upper body temperatures measured by infrared thermography: Implications for cooling strategies.

This research sought to evaluate the thermal zones of the upper body and firefighter personal protective equipment (PPE) immediately following uncompensable heat stress (0.03 °C increase/min). We hypothesized that the frontal portion of the head and the inside of the firefighter helmet would be the hottest as measured by infrared thermography. This hypothesis was due to previous research demonstrating that the head accounts for ∼8-10% of the body surface area, but it accounts for ∼20% of the overall body heat dissipation during moderate exercise. Twenty participants performed a 21-min graded treadmill exercise protocol (Altered Modified Naughton) in an environmental chamber (35 °C, 50 % humidity) in firefighter PPE. The body areas analyzed were the frontal area of the head, chest, abdomen, arm, neck, upper back, and lower back. The areas of the PPE that were analyzed were the inside of the helmet and the jacket. The hottest areas of the body post-exercise were the frontal area of the head (mean: 37.3 ± 0.4 °C), chest (mean: 37.5 ± 0.3 °C), and upper back (mean: 37.3 ± 0.4 °C). The coldest area of the upper body was the abdomen (mean: 36.1 ± 0.4 °C). The peak temperature of the inside of the helmet increased (p < 0.001) by 9.8 °C from 27.7 ± 1.6 °C to 37.4 ± 0.7 °C, and the inside of the jacket increased (p < 0.001) by 7.3 °C from 29.2 ± 1.7 °C to 36.5 ± 0.4 °C. The results of this study are relevant for cooling strategies for firefighters.

Preparation and Characterization of Chitosan/Hydroxypropyl Methylcellulose Temperature-Sensitive Hydrogel Containing Inorganic Salts for Forest Fire Suppression.

Effective forest fire suppression remains a critical challenge, necessitating innovative solutions. Temperature-sensitive hydrogels represent a promising avenue in this endeavor. Traditional firefighting methods often struggle to address forest fires efficiently while mitigating ecological harm and optimizing resource utilization. In this study, a novel intelligent temperature-sensitive hydrogel was prepared specially for forest fire extinguishment. Utilizing a one-pot synthesis approach, this material demonstrates exceptional fluidity at ambient temperatures, facilitating convenient application and transport. Upon exposure to elevated temperatures, it undergoes a phase transition to form a solid, barrier-like structure essential for containing forest fires. The incorporation of environmentally friendly phosphorus salts into the chitosan/hydroxypropyl methylcellulose gel system enhances the formation of temperature-sensitive hydrogels, thereby enhancing their structural integrity and firefighting efficacy. Morphological and thermal stability analyses elucidate the outstanding performance, with the hydrogel forming a dense carbonized layer that acts as a robust barrier against the spread of forest fires. Additionally, comprehensive evaluations employing rheological tests, cone calorimeter tests, a swelling test, and infrared thermography reveal the multifaceted roles of temperature-sensitive hydrogels in forest fire prevention and suppression strategies.

Characterization of Wildland Firefighters' Exposure to Coarse, Fine, and Ultrafine Particles; Polycyclic Aromatic Hydrocarbons; and Metal(loid)s, and Estimation of Associated Health Risks.

Firefighters' occupational activity causes cancer, and the characterization of exposure during firefighting activities remains limited. This work characterizes, for the first time, firefighters' exposure to (coarse/fine/ultrafine) particulate matter (PM) bound polycyclic aromatic hydrocarbons (PAHs) and metal(loid)s during prescribed fires, Fire 1 and Fire 2 (210 min). An impactor collected 14 PM fractions, the PM levels were determined by gravimetry, and the PM-bound PAHs and metal(loid)s were determined by chromatographic and spectroscopic methodologies, respectively. Firefighters were exposed to a total PM level of 1408.3 and 342.5 µg/m3 in Fire 1 and Fire 2, respectively; fine/ultrafine PM represented more than 90% of total PM. Total PM-bound PAHs (3260.2 ng/m3 in Fire 1; 412.1 ng/m3 in Fire 2) and metal(loid)s (660.8 ng/m3 versus 262.2 ng/m3), distributed between fine/ultrafine PM, contained 4.57-24.5% and 11.7-12.6% of (possible/probable) carcinogenic PAHs and metal(loid)s, respectively. Firefighters' exposure to PM, PAHs, and metal(loid)s were below available occupational limits. The estimated carcinogenic risks associated with the inhalation of PM-bound PAHs (3.78 × 10-9 - 1.74 × 10-6) and metal(loid)s (1.50 × 10-2 - 2.37 × 10-2) were, respectively, below and 150-237 times higher than the acceptable risk level defined by the USEPA during 210 min of firefighting activity and assuming a 40-year career as a firefighter. Additional studies need to (1) explore exposure to (coarse/fine/ultrafine) PM, (2) assess health risks, (3) identify intervention needs, and (4) support regulatory agencies recommending mitigation procedures to reduce the impact of fire effluents on firefighters.

High thermal buffer and radiative cooling sodium alginate-based Janus aerogel enables multi-scenario thermal management for firefighting clothing.

Firefighting clothing is an indispensable protective equipment for firefighters performing rescue activities under extreme heat and fire conditions. However, few bio-based thermal management materials that provide thermal comfort to firefighters in different operational scenarios have been reported. Herein, we present a novel strategy to prepare Janus-type aerogels based on sodium alginate biological macromolecules, consisting of a SiO2 nanoparticle layer and a microencapsulated paraffin@SiO2 phase-change composite layer. A passive radiative cooling and thermal energy storage was integrated into a functional dual-mode material system. Results show that Janus-type aerogel to cool down by 11.5 °C on a hot summer day. Meanwhile, paraffin@SiO2 has a high melting enthalpy of 127.5 J g-1 that effectively buffers temperature rise during the phase-change process. This Janus-type aerogel has ultra-low heat insulation (0.042 W/(m·K)), it can delay approximately 76.6 s to reach second-degree burn time for skin at a radiant heat exposure of 18.4 kW m-2. The work provides an innovative way to develop bio-based thermal management materials, which could enable multi-scenario thermal management for firefighting clothing.

Integrated Firefighting Textile with Temperature and Pressure Monitoring for Personal Defense.

Although electronic textiles that can detect external stimuli show great promise for fire rescue, existing firefighting clothing is still scarce for simultaneously integrating reliable early fire warning and real-time motion sensing, hardly providing intelligent personal protection under complex high-temperature conditions. Herein, we introduce an "all-in-one" hierarchically sandwiched fabric (HSF) sensor with a simultaneous temperature and pressure stimulus response for developing intelligent personal protection. A cross-arranged structure design has been proposed to tackle the serious mutual interference challenge during multimode sensing using two separate sets of core-sheath composite yarns and arrayed graphene-coated aerogels. The functional design of the HSF sensor not only possesses wide-range temperature sensing from 25 to 400 °C without pressure disturbance but also enables highly sensitive pressure response with good thermal adaptability (up to 400 °C) and wide pressure detection range (up to 120 kPa). As a proof of concept, we integrate large-scalable HSF sensors onto conventional firefighting clothing for passive/active fire warning and also detecting spatial pressure and temperature distribution when a firefighter is exposed to high-temperature flames, which may provide a useful design strategy for the application of intelligent firefighting protective clothing.

All-in-one bio-derived poly(L-lactic acid)-based composite with fire-resistance and smoke-suppression performance.

The flammability of bio-derived poly(L-lactic acid) (PLA) greatly limits its application and eco-friendly multifunctional fire-fighting PLA-based composites are highly desired. In this work, a fully bio-based modified CS (C-CS) and commercially available eco-friendly ammonium polyphosphate (APP) were used as a synergistic flame retardant agent (C-CS/APP) to investigate its effects on fire-proofing performance and diverse properties of the PLA. The PLA/5%C-CS/5%APP composite exhibited excellent fire-resistant performance with anti-droplet, smoke-suppression and self-extinguishing property, and its limited oxygen index enhanced by 37 % (compared with neat PLA). This composite reached the highest V-0 fire safety rating, and its peak of heat release rate and total smoke production reduced by 26.5 % and 68.3 %, respectively. In addition, the char residue yield after the cone calorimeter test increased by 46 times in the composite, indicating an outstanding char-forming capacity. The condensed phase flame retardancy played a crucial role on the fire-fighting of this composite, that is, significantly enhanced char residue (as a physical barrier) blocked the heat exchange and O2 entry, and further suppressed the combustion reaction. Additionally, the PLA-based composite showed outstanding UV-absorption property, good anti-bacterial effect, and increased hydrophilicity and crystallizability.

Mechanochemical degradation of per- and polyfluoroalkyl substances in soil using an industrial-scale horizontal ball mill with comparisons of key operational metrics.

Horizontal ball mills (HBMs) have been proven capable of remediating per- and polyfluoroalkyl substances (PFAS) in soil. Industrial-sized HBMs, which could easily be transported to impacted locations for on-site, ex-situ remediation, are readily available. This study examined PFAS degradation using an industrial-scale, 267 L cylinder HBM. This is the typical scale used in the industry before field application. Near-complete destruction of 6:2 fluorotelomer sulfonate (6:2 FTS), as well as the non-target PFAS in a modern fluorotelomer-based aqueous film forming foam (AFFF), was achieved when spiked onto nepheline syenite sand (NSS) and using potassium hydroxide (KOH) as a co-milling reagent. Perfluorooctanesulfonate (PFOS) showed much better and more consistent results with scale-up regardless of KOH. Perfluorooctanoate (PFOA) was examined for the first time using a HBM and behaved similarly to PFOS. Highly challenging field soils from a former firefighting training area (FFTA) were purposefully used to test the limits of the HBM. To quantify the effectiveness, free fluoride analysis was used; changes between unmilled and milled soil were measured up to 7.8 mg/kg, which is the equivalent of 12 mg/kg PFOS. Notably, this does not factor in insoluble fluoride complexes that may form in milled soils, so the actual amount of PFAS destroyed may be higher. Soil health, evaluated through the assessment of key microbial and associated plant health parameters, was not significantly affected as a result of milling, although it was characterized as poor to begin with. Leachability reached 100 % in milled soil with KOH, but already ranged from 81 to 96 % in unmilled soil. A limited assessment of the hazards associated with the inhalation of PFAS-impacted dust from ball-milling, as well as the cross-contamination potential to the environment, showed that the risk was low in both cases; however, precautions should always be taken.

Heat strain in professional firefighters: physiological responses to a simulated smoke dive in extremely hot environments and the subsequent recovery phase.

Firefighters risk heat strain during occupational tasks when exposed to extremely hot environmental conditions and performing high-intensity work. Relevant training scenarios are therefore essential. This study investigated the effect of a single simulated smoke dive and the following recovery phase on physiological and perceptual responses. Nineteen professional male firefighters (43 ± 8 yr) performed a 2-min stair walk and a15-min simulated smoke dive in a two-floor heat chamber (110 °C to 272°C) (HEAT), followed by a 5-min stair walk outside the heat chamber. Heart rate (HR), gastrointestinal temperature (Tgi) and skin temperatures were registered continuously during the test. The Tgi increased significantly from the start (37.5 ± 0.3°C) to the end of HEAT (38.4 ± 0.4°C) and further increased after the heat exposure (39.6 ± 0.5°C).The HR also increased significantly from the start (92 ± 14 bpm) to the end of HEAT (185 ± 13 bpm) and increased after the heat exposure to a maximum of 190 ± 13 bpm. The simulated smoke dive induced high physiological strain on the firefighters, and the increase in Tgi and HR after the hot exposure must be considered during live fire events when repeated smoke dives are required.

Metabolic demands of a simulated smoke-diving drill.

The main goal of this study was to update the Finnish smoke-diving drill (FSDD) and to measure the physical strain of and recovery from the drill. Furthermore, the aim was to compare the physical strain of contract and professional firefighters and effect of floor materials. The associations between aerobic capacity and physical strain were also studied. The updates made included an added hose pull task and updating the equipment used. Heart rate (HR), oxygen consumption (V̇O2), and blood lactate concentration ([La-]) of 32 professional and 5 contract firefighters were measured before, during, and 10 and 30 min after the updated drill. The mean HR during the drill was 78% and V̇O2 59% of maximum. HR and [La-] had not recovered to baseline levels after 30-minute recovery period. Physical strain was higher among contract firefighters and [La-] accumulation on rough floor surfaces. Better aerobic capacity was associated with reduced physical strain.

The purpose of this study was to update the Finnish smoke-diving drill. This paper describes the process of updating the drill, and the experimental measurements regarding the metabolic demands of the updated drill. The updates made included adding a hose pull task and updating the equipment used during the drill.

Relative risks of childhood developmental vulnerabilities in three Australian communities with exposure to per- and polyfluoroalkyl substances: data linkage study.

Background: Aqueous film forming foams (AFFF) containing per- and polyfluoroalkyl substances (PFAS) caused local environmental contamination in three Australian residential areas: Katherine in the Northern Territory (NT), Oakey in Queensland (Qld) and Williamtown in New South Wales (NSW). We examined whether children who lived in these areas had higher risks of developmental vulnerabilities than children who lived in comparison areas without known contamination. Methods: All children identified in the Medicare Enrolment File-a consumer directory for Australia's universal healthcare insurance scheme-who ever lived in exposure areas, and a sample of children who ever lived in selected comparison areas, were linked to the Australian Early Development Census (AEDC). The AEDC data were available from four cycles: 2009, 2012, 2015 and 2018. For each exposure area, we estimated relative risks (RRs) of developmental vulnerability on each of five AEDC domains and a summary measure, adjusting for sociodemographic characteristics and other potential confounders. Findings: We included 2,429 children from the NT, 2,592 from Qld and 510 from NSW. We observed lower risk of developmental vulnerability in the Communication skills and general knowledge domain in Katherine (RR = 0.74, 95% confidence interval (CI) 0.57 to 0.97), and higher risks of developmental vulnerability in the same domain (RR = 1.49, 95% CI 1.18 to 1.87) and in the Physical health and wellbeing domain in Oakey (RR = 1.31, 95% CI 1.06 to 1.61). Risks of developmental vulnerabilities on other domains were not different from those in the relevant comparison areas or were uncertain due to small numbers of events. Conclusion: There was inadequate evidence for increased risks of developmental vulnerabilities in children who ever lived in three PFAS-affected areas in Australia.

Assessment of exposures to firefighters from wildfires in heavily contaminated areas of the Chornobyl Exclusion Zone.

The aim of this study was to assess the exposures received by firefighters engaged in extinguishing the large-scale wildfires in the most contaminated areas of the Ukrainian part of the Chornobyl Exclusion Zone in 2016 and 2020. The assessments are based on measurements of radionuclide airborne concentrations in the breathing zones of workers and at the aerosol sampling stations of the automated radiation monitoring system operated by SSE Ecocenter. During the wildfires, the radionuclide airborne concentrations increased by orders of magnitude compared to the background levels, reaching maximum values in the firefighting area of 1.20 ± 0.01 Bq m-3 for 90Sr, 0.18 ± 0.01 Bq m-3 for 137Cs, (1.8 ± 0.3) ∙10-4 Bq m-3 for 238Pu, (4.5 ± 0.7) ∙10-4 Bq m-3 for 239-240Pu, and (8.0 ± 1.3) ∙10-3 Bq m-3 for 241Pu. The internal effective doses to firefighters due to inhaled radionuclides did not exceed 2 µSv h-1 and were 3-5 times lower compared to the external dose of gamma radiation. Thus, the time of firefighting in the ChEZ will be limited by the external dose.

Firefighting, per- and polyfluoroalkyl substances, and DNA methylation of genes associated with prostate cancer risk.

Prostate cancer is the leading incident cancer among men in the United States. Firefighters are diagnosed with this disease at a rate 1.21 times higher than the average population. This increased risk may result from occupational exposures to many toxicants, including per- and polyfluoroalkyl substances (PFAS). This study assessed the association between firefighting as an occupation in general or PFAS serum levels, with DNA methylation. Only genomic regions previously linked to prostate cancer risk were selected for analysis: GSTP1, Alu repetitive elements, and the 8q24 chromosomal region. There were 444 male firefighters included in this study, with some analyses being conducted on fewer participants due to missingness. Statistical models were used to test associations between exposures and DNA methylation at CpG sites in the selected genomic regions. Exposure variables included proxies of cumulative firefighting exposures (incumbent versus academy status and years of firefighting experience) and biomarkers of PFAS exposures (serum concentrations of 9 PFAS). Proxies of cumulative exposures were associated with DNA methylation at 15 CpG sites and one region located within FAM83A (q-value <0.1). SbPFOA was associated with 19 CpG sites (q < 0.1), but due to low detection rates, this PFAS was modeled as detected versus not detected in serum. Overall, there is evidence that firefighting experience is associated with differential DNA methylation in prostate cancer risk loci, but this study did not find evidence that these differences are due to PFAS exposures specifically.

Biodegradable and flame-retardant cellulose-based wearable triboelectric nanogenerator for mechanical energy harvesting in firefighting clothing.

Integrating flexible triboelectric nanogenerators (TENGs) into firefighting clothing offers exciting opportunities for wearable portable electronics in personal protective technology. However, it is still a grand challenge to produce eco-friendly TENGs from biodegradable and low-cost natural polymers for mechanical-energy harvesting and self-powered sensing. Herein, conductive polypyrrole (PPy) and natural chitosan (CS)/phytic acid (PA) tribonegative materials were employed onto the Lycra fabric (LC) in turn to assemble the biodegradable and flame-retardant single-electrode mode LC/PPy/CS/PA TENG (abbreviated as LPCP-TENG). The resultant LPCP-TENG exhibits truly wearable breathability (1378.6 mm/s), elasticity (breaking elongation 291 %), and shape adaptivity performance that can produce an open circuit voltage of 0.3 V with 2 N contact pressure at a working frequency of 5 Hz with a limiting oxygen index of 35.2 %. Furthermore, facile monitoring for human motion of firefighters on fireground is verified by LPCP-TENG when used as self-powered flexible tactile sensor. In addition, degradation experiments have shown that waste LPCP-TENG can be fully degraded in soil within 120 days. This work broadens the applicational range of wearable TENG to reduce the environmental effects of abandoned TENG, exhibiting prosperous applications prospects in the field of wearable power source and self-powered motion detection sensor for personal protection application on fireground.

A single rapid heat stress episode does not result in prolonged elevations in salivary cortisol and C-reactive protein production in firefighters.

In the present experiment, we evaluated the impact of rapid heat stress (RHS) on salivary cortisol and C-reactive protein production pre-RHS, post-RHS, and 24 and 48 h post-RHS exposure among firefighters. Previous research has demonstrated that RHS increases salivary cortisol during RHS and immediately post-RHS exposure. However, no research has evaluated the duration necessary to return to baseline cortisol levels following RHS. Additionally, no studies have analyzed the impact of RHS on inflammatory biomarkers, such as C-reactive protein. This study hypothesized that salivary cortisol and C-reactive protein levels would increase following RHS and then return to pre-RHS levels within 24 h post-exposure. Twenty-four participants performed a steady-state treadmill protocol in an environmental chamber (35 °C; 45% humidity) in full firefighter personal protective equipment until reaching either a core temperature (Tc) of 39 °C or a volitional maximum. The subjects had their saliva collected via the passive drool protocol pre-RHS, post-RHS, and 24 and 48 h post-RHS. Pre-RHS of 0.23 ± 0.03 µg/dL increased post-RHS to 0.51 ± 0.06 µg/dL (p < 0.001). This finding supports previous literature demonstrating the immediate impact of RHS. There were no changes in C-reactive protein. The novel finding of this study is that salivary cortisol levels return to baseline in the 24 h post-RHS exposure. This indicates that 24 h is recommended to recover from RHS and should be applied to prevent the chronic stress response.

Evaluation of the relationship between occupational-specific task performance and measures of physical fitness, cardiovascular and musculoskeletal health in firefighters.

INTRODUCTION: Firefighters are required to perform physically strenuous tasks such as hose drags, victim rescues, forcible entries and stair climbs to complete their public safety mission. Occupational-specific tasks are often used to evaluate the ability of firefighters to adequately/safely perform their duties. Depending on the regions, occupational-specific tasks include six to eight individual tasks, which emphasize distinct aspects of their physical fitness, while also requiring different levels of cardiovascular (CVH) and musculoskeletal health (MSH). Therefore, the aim of this study was to evaluate the relationship between specific occupational task performance and measures of physical fitness, cardiovascular and musculoskeletal health. METHODS: Using a cross-sectional design, 282 full-time male and female firefighters were recruited. A researcher-generated questionnaire and physical measures were used to collect data on sociodemographic characteristics, CVH, MSH and weekly physical activity habits. Physical measures were used to collect data on physical fitness and occupational-specific task performance. RESULTS: Absolute cardiorespiratory fitness (abV̇O2max), grip strength, leg strength, push-ups, sit-ups and lean body mass (all p < 0.001) had an inverse association with completion times on all occupational-specific tasks. Age was positively related to the performance of all tasks (all p < 0.05). Higher heart rate variability (HRV) was associated with better performance on all tasks (all p < 0.05). Bodyfat percentage (BF%) and diastolic blood pressure were positively associated with the step-up task (p < 0.05). Lower back musculoskeletal injury (LoBMSI), musculoskeletal discomfort (MSD), and lower limb MSD were associated with a decreased odds of passing the step-up. Upper body MSIs (UBMSI), LoBMSIs and Lower back MSD were associated with decreased odds of passing the rescue drag. CONCLUSION: Firefighters that were taller, leaner, stronger and fitter with a more favourable CVH profile, higher HRV and less musculoskeletal discomfort performed best on all occupational-specific tasks.

Identifying the most important, frequent, and physically demanding tasks of Brazilian firefighters.

This study aimed to identify the most important, frequently performed, and physically demanding tasks performed by Brazilian firefighters and to identify tasks that could be used to assess physical fitness. A subjective task analysis was conducted. Five hundred twenty-four firefighters (84% male; 16% females) responded to an online survey and rated 37 tasks across three domains (most important, most frequent, and most physically demanding). A dichotomous decision analysis was used to inform the proposed physical fitness tests. Wildland firefighting tasks presented the highest overall mean rate. Traffic control was considered the most important and frequently performed task. Lifeguard rescue was considered the most physically demanding task. The dichotomous analysis identified 14 essential tasks (seven structural firefighting and seven automobile accidents). The tasks identified may be helpful in developing criterion physical fitness tests and training programs related to firefighters' demands.Practitioner summary: The unpredictability, variability, and dangerousness of firefighting make it challenging to observe the physical demands imposed on firefighters. A subjective task analysis was conducted to identify essential tasks performed by Brazilian firefighters. Wildland firefighting, lifeguard rescue, automobile accidents, and structural firefighting tasks were the most important, frequent, and physically demanding.