A novel LD-targeting cysteine-activated fluorescent probe for diagnosis of APAP-induced liver injury and its application in food analysis.

Cysteine (Cys) not only plays an indispensable role in maintaining the redox balance in organisms, but is also an important nutrient in the food industry. Fluorescence-based detection systems have emerged as an effective method to track the locations and concentrations of different species. To achieve efficient monitoring of Cys in both food samples and biological systems, a novel lipid droplet (LD) targeted fluorescent probe (namely NIT-Cys) was constructed for the turn-on detection of Cys, characterized by a large Stokes shift (142 nm), a short response time (<8 min), and a low Cys detection limit (39 nM). Furthermore, the NIT-Cys probe has been successfully used not only to quantify the amounts of Cys in selected food samples, but also to enable the visualization of endogenous Cys in acetaminophen (APAP)-induced drug-induced liver injury cells, zebrafish larvae and mice models. Consequently, the work presented here provides an efficient tool for monitoring Cys.

Current trends of functional monomers and cross linkers used to produce molecularly imprinted polymers for food analysis.

Molecularly imprinted polymers (MIPs) as artificial synthetic receptors are in high demand for food analysis due to their inherent molecular recognition abilities. It is common practice to employ functional monomers with basic or acidic groups that can interact with analyte molecules via hydrogen bonds, covalent bonds, and other interactions (π-π, dipole-ion, hydrophobic, and Van der Waals). Therefore, selecting the appropriate functional monomer and cross-linker is crucial for determining how precisely they interact with the template and developing the polymeric network's three-dimensional structure. This study summarizes the advancements made in MIP's functional monomers and cross-linkers for food analysis from 2018 to 2023. The subsequent computational design of MIP has been thoroughly explained. The discussion has concluded with a look at the difficulties and prospects for MIP in food analysis.

Benefits of MIP in food analysis have been discussed.Different functional monomers of MIPs have been discussed.Different cross-linkers of MIPs have been discussed.Theoretical interactions between functional monomers and templates for MIP design have been discussed.

A practical and eco-friendly method for the determination of polycyclic aromatic hydrocarbons in açaí-based food products by vacuum-assisted sorbent extraction coupled to gas chromatography-mass spectrometry.

For the first time, a method for the simultaneous analysis of fifteen polycyclic aromatic hydrocarbons (PAHs), including light and heavy PAHs, in açaí-based food products (AFPs) was developed using vacuum-assisted sorbent extraction (VASE) combined with gas chromatography-mass spectrometry (GC-MS). The method requires no organic solvents and is amenable to full automation. To achieve optimal analytical extraction conditions, VASE parameters including stirring rate, extraction time, desorption temperature, desorption time, preheat time, and preheat temperature were optimized using sequential multivariate optimization. The method was validated and yielded limits of quantification below 1 µg kg-1 for all analytes, with recoveries ranging from 65 % to 112 % and good precision (≤11 % relative standard deviation). Additionally, the greenness and practical aspects of the method were investigated using the Green Analytical Procedure Index (GAPI), eco-scale, and the Blue Applicability Grade Index (BAGI), respectively. The VASE-GC-MS approach is suitable for routine analysis and exhibits characteristics of a green analytical method. No PAHs were detected above the limits of detection in thirty samples of AFPs.

[Recent advances in research on sample pretreatment methods based on supramolecular-derived porous organic polymers].

Porous organic polymers (POPs) are a class of materials composed of organic building blocks usually consisting of the elements C, H, O, N, and B and other light elements connected by covalent bonds. Owing to the diversity of synthesis methods in organic chemistry, POPs can be prepared by Suzuki coupling, Sonogashira-Hagihara cross-coupling, Schiff-base condensation, Knoevenagel condensation, and Friedel-Crafts alkylation. POPs show great application potential in the field of sample pretreatment because of their large specific surface area, adjustable pore size, high tailorability, and easy modification. The design of new functional building blocks is an important factor in advancing the development of POPs and is key to the efficient separation and enrichment of target molecules in complex substrates. In recent years, supramolecular-derived compounds have provided new inspiration and breakthroughs in the construction of POPs on account of their excellent host-guest recognition properties, simple functionalization strategies, and adjustable topological configurations. The "cavitand-to-framework" approach, that is, the knitting of 0D macrocycles into hierarchical 2D or 3D POPs using suitable linkers, and extension of the research scope of supramolecular chemistry from discrete cavities to rigidly layered porous organic frameworks can lead to significant improvements in the porosity and stability of supramolecular-derived compounds. They can also provide an effective means to expand the structural diversity of POPs and generate layered structures with high porosity. This review summarizes the preparation strategies and structural characteristics of supramolecular-derived POPs with different structures, such as crown ether-based POPs, cyclodextrin-based POPs, and calixarene-based POPs. The promising applications of these materials in sample pretreatment focusing on food analysis and environmental monitoring, including epoxides, organic dyes, heavy metals, algatoxins, halogens, and antibiotic drugs, are then summarized. Next, the extraction mechanisms mainly attributed to host-guest recognition, π-π stacking, and hydrogen-bonding and electrostatic interactions between the supramolecular structures and analytes are described. The key role and potential advantages of the different preparation strategies and structural characteristics of these POPs in sample pretreatment are also discussed. Finally, the future prospects and remaining challenges of supramolecular-derived POPs are proposed. Supramolecular-derived POPs can not only achieve the rapid and selective extraction of target analytes during sample pretreatment but also improve the extraction effect of online solid phase extraction technologies. However, although numerous supramolecular-derived POPs have been developed, few have been applied in the field of sample pretreatment. Thus, the expansion of the application potential of more POP materials requires further exploration and research. The design and synthesis of supramolecular-derived POPs with highly selective recognition performance remains an important research direction in the field of sample pretreatment.

Matrix-matched quantification of volatile organic compounds (VOCs) in gluten free flours and bakery products.

The aim of this study deals with characterize the volatile profiles of gluten free flours and bakery products. An appropriate HS-SPME/GC-MS methods for the quantification analyses was performed and corn starch solid as standards was used. 34 different samples were analysed, and 127 compounds distributed in 4 classes (alcohols, aldehydes and ketones, heterocyclic compounds, and terpenes), that make up the aroma of these gluten free, were identified. The developed method is characterized by detection limits of 0.0004 and 0.0047 mg/kg for camphor and pyrazine, respectively, and linearity of quantification standards were between 0.990 and 0.998 for a range of 3-50 mg/kg.

Invasive Round Goby (Neogobius melanostomus) Fish from the Southern Baltic as a Source of Arsenic and Selenium-Food Safety Aspects.

Minimizing human exposure to arsenic (As) and ensuring an adequate dietary intake of selenium (Se) are significant issues in research on food sources. This study measured the content of As and Se in the muscles, gills, liver, and gonads of the fish round goby (Neogobius melanostomus) to assess the benefits and risks associated with their consumption. This was achieved by using dietary reference intake (DRI), estimated daily intake (EDI), target hazard quotient (THQ), and carcinogenic risk (CR). The elements were analyzed by atomic absorption spectrometry. The mean concentrations of As and Se (in µg kg-1 wet weight) were 25.1 and 161.4 in muscle, 58.8 and 367.4 in liver, 47.4 and 635.3 in gonads, and 16.4 and 228.5 in gills, respectively. Arsenic in the muscle portion of fish accounted for up to 0.5% of the DRI, while Se constituted approximately 30% of the DRI. The EDI values were below the reference oral dose (RfD). The THQ were much below the permissible levels (THQ < 1), and the CR were at least within the permissible limit (CR < 10-4). With regard to the As content, round goby muscles can be deemed safe for consumers. They may also be a valuable source of Se in the human diet. However, round goby consumption should be monitored for the proper and safe intake of these elements.

Portable sensing methods based on carbon dots for food analysis.

Food analysis is significantly important in monitoring food quality and safety for human health. Traditional methods for food detection mainly rely on benchtop instruments and require a certain amount of analysis time, which promotes the development of portable sensors. Portable sensing methods own many advantages over traditional techniques such as flexibility and accessibility in diverse environments, real-time monitoring, cost-effectiveness, and rapid deployment. This review focuses on the portable approaches based on carbon dots (CDs) for food analysis. CDs are zero-dimensional carbon-based material with a size of less than 10 nm. In the manner of sensing, CDs exhibit rich functional groups, low biotoxicity, good biocompatibility, and excellent optical properties. Furthermore, there are many methods for the synthesis of CDs using various precursor materials. The incorporation of CDs into food science and engineering for enhancing food safety control and risk assessment shows promising prospects.

Nickel-manganese-cobalt tetragonal spinel ternary oxide nanocomposite as an effective adsorbent for dispersive solid phase micro-extraction of cadmium in food and water samples.

Nickel-manganese-cobalt tetragonal spinel ternary oxide nanocomposite (NMC-TSO) was synthesized. It was utilized as an efficient sorbent for the dispersive solid phase microextraction (D-SPµE) without vortexing of cadmium. The analysis of the cadmium was carried out by FAAS. The effective analytical parameters including pH (6) contact times (no vortexing), sample volume (70 mL), eluent volume (3 mL of 2 mol L-1 HCl), linear dynamic ranges (1.07-85.7 µg L-1), and re-useability (33) on the D-SPµE efficiency were investigated. The PF, RSD% and LOD of the D-SPµE for cadmium were 23.3, ≤ 2.8% and 0.49 µg L-1, respectively. The tolerable concentrations of Ca2+, Mg2+, K+ and Na+ on Cd(II) were 50,000 mg L-1, 50,000 mg L-1, 25,000 mg L-1 and 7500 mg L-1, respectively. The method was accurated by analysis of food and water certificate reference materials (NW-TMDA-54.6 Lake water, SPS-WW1 121 Batch wastewater, 1573a Tomato Leaves and TORT-3 Lobster Hepatopancreas) and - recovery experiments. The D-SPµE-FAAS method was applied for the cadmium determination in dam water, wastewater, river water, well water, sea water, tea, cacao, nut, bitter chocolate, rice, leek, cinnamon and parsley.

Food authentication, current issues, analytical techniques, and future challenges: A comprehensive review.

Food authentication and contamination are significant concerns, especially for consumers with unique nutritional, cultural, lifestyle, and religious needs. Food authenticity involves identifying food contamination for many purposes, such as adherence to religious beliefs, safeguarding health, and consuming sanitary and organic food products. This review article examines the issues related to food authentication and food fraud in recent periods. Furthermore, the development and innovations in analytical techniques employed to authenticate various food products are comprehensively focused. Food products derived from animals are susceptible to deceptive practices, which can undermine customer confidence and pose potential health hazards due to the transmission of diseases from animals to humans. Therefore, it is necessary to employ suitable and robust analytical techniques for complex and high-risk animal-derived goods, in which molecular biomarker-based (genomics, proteomics, and metabolomics) techniques are covered. Various analytical methods have been employed to ascertain the geographical provenance of food items that exhibit rapid response times, low cost, nondestructiveness, and condensability.

Aptamer-modified paper-based analytical devices for the detection of food hazards: Emerging applications and future perspective.

Food analysis plays a critical role in assessing human health risks and monitoring food quality and safety. Currently, there is a pressing need for a reliable, portable, and quick recognition element for point-of-care testing (POCT) to better serve the demands of on-site food analysis. Aptamer-modified paper-based analytical devices (Apt-PADs) have excellent characteristics of high portability, high sensitivity, high specificity, and on-site detection, which have been widely used and concerned in the field of food safety. The article reviews the basic components and working principles of Apt-PADs, and introduces their representative applications detecting food hazards. Finally, the advantages, challenges, and future directions of Apt-PADs-based sensing performance are discussed, to provide new directions and insights for researchers to select appropriate Apt-PADs according to specific applications.

Integrating detection and degradation of bisphenol A by photocatalytic fuel cell-driven photoelectrochemical sensor.

To ensure food safety and environmental protection, it is crucial to rapidly identify and remove bisphenol A (BPA), a plasticizer commonly used in the inner lining of food containers and beverage packaging. Here, a photocatalytic fuel cell (PFC)-integrated self-powered photoelectrochemical (PEC) sensor is constructed. Unlike conventional single PEC or PFC sensors, this PFC-integrated PEC sensor relies on not only the difference in Fermi energy levels between photoanode and photocathode but also charge accumulation resulted from the oxidation of BPA by photogenerated holes. Consequently, this sensor achieved a remarkable maximum output power (Pmax) of 8.58 µW cm-2, as well as a high sensitivity, wide linear detection range (0.1-200 µM), low detection limit (0.05 µM), great stability, reproducibility, and real sample detection capability. This work integrates PFC and PEC technologies successfully for the rapid identification and efficient removal of BPA.

LC/MS-Based Metabolomics Reveals Chemical Variations of Two Broccoli Varieties in Relation to Their Anticholinesterase Activity: In vitro and In silico Studies.

Broccoli is commonly consumed as food and as medicine. However, comprehensive metabolic profiling of two broccoli varieties, Romanesco broccoli (RB) and purple broccoli (PB), in relation to their anticholinergic activity has not been fully disclosed. A total of 110 compounds were tentatively identified using UPLC-Q-TOF-MS metabolomics. Distinctively different metabolomic profiles of the two varieties were revealed by principal component analysis (PCA). Furthermore, by volcano diagram analysis, it was found that PB had a significantly higher content of phenolic acids, flavonoids, and glucosinolates, indicating the different beneficial health potentials of PB that demonstrated higher antioxidant and anticholinergic activities. Moreover, Pearson's correlation analysis revealed 18 metabolites, mainly phenolic and sulfur compounds, as the main bioactive. The binding affinity of these biomarkers to the active sites of acetyl- and butyryl-cholinesterase enzymes was further validated using molecular docking studies. Results emphasize the broccoli significance as a functional food and nutraceutical source and highlight its beneficial effects against Alzheimer's disease.

Generating robust aptamers for food analysis by sequence-based configuration optimization.

Advanced analytical techniques are emerging in the food industry. Aptamer-based biosensors achieve rapid and highly selective analysis, thus drawing particular attention. Aptamers are oligonucleotide probes screened via in vitro Systematic Evolution of Ligands by EXponential Enrichment (SELEX), which can bind with their specific targets by folding into three-dimensional configurations and accept various modifications to be incorporated into biosensors, showing great potential in food analysis. Unfortunately, aptamers obtained by SELEX may not possess satisfactory affinity. Post-SELEX strategies were proposed to optimize aptamers' configuration and enhance the binding affinity, with specificity confirmed. Sequence-based optimization strategies exhibit great advantages in simple operation, good generalization, low cost, etc. This review summarizes the latest study (2015-2023) on generating robust aptamers for food targets by sequence-based configuration optimization, as well as the generated aptamers and aptasensors, with an expectation to provide inspirations for developing aptamer and aptasensors with high performance for food analysis and to safeguard food quality and safety.

Advances in magnetic analytical extraction techniques for detecting antibiotic residues in edible samples.

The widespread use of antibiotics in agricultural and animal husbandry to treat bacterial illnesses has resulted in a rise in antibiotic-resistant bacteria. These bacteria can grow when antibiotic residues are present in food items, especially in edible animal products. As a result, it is crucial to monitor and regulate the amounts of antibiotics in food. Magnetic analytical extractions (MAEs) have emerged as a potential approach for extracting antibiotic residues from food using magnetic nanoparticles (MNPs). Recent improvements in MAEs have resulted in the emergence of novel MNPs with better selectivity and sensitivity for the extraction of antibiotic residues from food samples. Consequently, this review paper addresses current developments in MAE for extracting antibiotic residues from edible samples. It also provides a critical analysis of contemporary MAE practices. The current issues and potential future developments in this field are also discussed, thereby providing a framework for future study paths.

A hybrid catalyst-triggered cascade reaction for cholesterol detection using a smartphone-based miniature fluorescent apparatus.

A new hybrid biological-chemical catalyst, magnetic nanoparticles functionalized with cholesterol oxidase (Fe3O4/APTES/ChOx), was developed for cholesterol detection. In the presence of cholesterol, the enzyme produced H2O2, which facilitated the generation of fluorescent molecules from the fluorogenic substrate with the assistance of Fe3O4 nanoparticles. A smartphone camera with a miniature fluorescent apparatus was used to assess fluorescence emission. Then, a smartphone application was employed to translate the fluorescence intensity to the red, green, and blue (RGB) domain. The developed approach achieved excellent selectivity and acceptable performances while supporting an onsite analysis approach. The practical operational range spanned from 5 to 100 nM, with a detection limit of 0.85 nM. Fe3O4/APTES/ChOx was applied for up to four replicates of reuse and demonstrated stability for at least 30 days. The applicability of the method was evaluated in milk samples, and the results were in accordance with the reference method.

Determination of vitamin c in raw fruit and vegetable homogenates: dietary exposure and health effects of excess intake in adults and children.

Objective: The aim of the study was to determine Vitamin C content in some fruits and vegetables (FAV) including apple, banana, orange, pineapple, watermelon, carrot and cucumber, sold in the local markets in Awka, Anambra State, Nigeria as well as Vitamin C content in two-component and three-component homogenates FAV. The work was also designed to investigate the dietary exposure and health effects of excess vitamin C intake in adults and children. Material and methods: Vitamin C as total ascorbic acid (AA) after reduction of dehydroascorbic acid was analyzed using both titrimetric and spectrophotometric methods. The titrimetric method involved iodometric back-titration while the spectrophotometric method was done at an absorbance of 530 nm. The dietary exposure was evaluated as the total FAV intake multiplied by chemical concentration in the FAV whereas the health effect of excess vitamin C intake was conducted using the hazard quotient (HQ). Results: The results revealed that Vitamin C for single fruits ranged from 11.76 - 41.17 mg/L for spectroscopic method and 16.9 - 31.84 mg/L for titrimetric method. Fruit homogenates showed Vitamin C concentrations of 14.70 - 220.58 mg/L and 17.23 - 209.09 mg/L for two-components homogenates: 29.41-132.35 mg/L and 31.05-113.10 mg/L for tri-components homogenates for spectrophotometric and titrimetric methods respectively. The results of dietary exposure and the health effects of excess vitamin C intake showed that children are more susceptible to health issues than adults in illnesses such as nausea, gastrointestinal pains, increased kidney stones and hyperactivity. Conclusion: There is therefore the need for a national recommended dietary allowance for total ascorbic acid (AA) in FAV homogenates from a stakeholder point of view in Nigeria.

Authentication of ten distinctive triterpenoids in Antrodia cinnamomea serves as a crucial aspect for ensuring the quality control of associated nutraceutical products.

Edible mushroom Antrodia cinnamomea is distinctive for its use in many health supplement products in relieving of diverse health-related conditions. A. cinnamomea is known for its rich array of bioactive secondary metabolites, predominantly terpenoids, that possess anti-inflammatory properties. Despite the abundance of these compounds, only some compounds have demonstrated notable anti-inflammatory activity. Moreover, there is a lack of established quality control methods specifically tailored to the active constituents of these products. Consequently, there is a great need for the development of precise and effective quality control methods for A. cinnamomea-based products, targeting their active components to ensure the consistency and reliability of these products in harnessing their anti-inflammatory potential. Herein we report a quantitative HPLC method for better evaluating the quality of A. cinnamomea based dietary supplements. Based on their bioactivities, we selected ten benchmark compounds, i. e. antcin K, (25S)-antcin H, (25R)-antcin H, (25R)-antcin C, (25S)-antcin C, (25R)-antcin A, 15α-acetyl-dehydrosulphurenic acid, versisponic acid D, dehydroeburicoic acid, and eburicoic acid and developed and validated a HPLC-UV method for quantification of these compounds simultaneously with high sensitivity, linearity and range, precision, and accuracy. Furthermore, we applied our method to quantify the commercially available A. cinnamomea containing supplements and found that the quality of these supplements varies greatly with only one product containing good amount of the active compounds. Our method provides a needed solution to quality control problem of the highly priced A. cinnamomea food and nutraceutical products that show great variety and inconsistency.

Dicationic imidazole ionic liquid stationary phase for preservative detection and its application under mixed mode of HILIC/RPLC/IEC.

BACKGROUND: Food safety has always been a great concern, and the detection of additives is vital to ensuring food safety. Therefore, there is a necessity to develop a method that can quickly and efficiently separate and detect additives in food. High performance liquid chromatography is widely used in the analysis and testing of food additives. Ionic liquids have attracted wide attention in the preparation of high performance liquid chromatography stationary phases owing to their high stability, low vapor pressure and adjustable structure. RESULTS: We developed a novel dicationic imidazole ionic liquid stationary phase for the simultaneous determination of organic preservatives (sodium benzoate, potassium sorbate) and inorganic preservatives (nitrate and nitrite) in foodstuffs under mixed-mode chromatography. The method had the advantages of easy operation, high reproducibility, good linearity and precision. In the detection of these four preservatives, the limit of detection ≤0.4740 mg⋅L-1 and the limit of quantification ≤1.5800 mg⋅L-1. The intra-day and inter-day precision were less than 4.02%, and the recovery rate was 95.90∼100.19 %. At the same time, we also characterized the stationary phase, explored the mechanism and evaluated the chromatographic performance. The stationary phase was able to operate under the mixed mode of reversed phase/hydrophilic interaction/ion exchange chromatography, and it was capable of separating hydrophilic substances, hydrophobic substances, acids, and inorganic anionic substances with good separation efficiency and had high column efficiency. SIGNIFICANCE: In summary, the stationary phase has a promising application in the routine analysis of organic and inorganic preservatives in food. In addition, the stationary phase has good separation ability for hydrophilic, hydrophobic, ionic substances and complex samples, making it a prospective material for chromatographic separation.

Distance-based paper analytical devices integrated with molecular imprinted polymers for Escherichia coli quantification.

The development of distance-based paper analytical devices (dPADs) integrated with molecularly imprinted polymers (MIPs) to monitor Escherichia coli (E. coli) levels in food samples is presented. The fluidic workflow on the device is controlled using a designed hydrophilic bridge valve. Dopamine serves as a monomer for the formation of the E. coli-selective MIP layer on the dPADs. The detection principle relies on the inhibition of the E. coli toward copper (II) (Cu2+)-triggered oxidation of o-phenylenediamine (OPD) on the paper substrate. Quantitative detection is simply determined through visual observation of the residual yellow color of the OPD in the detection zone, which is proportional to E. coli concentration. The sensing exhibits a linear range from 25.0 to 1200.0 CFU mL-1 (R2 = 0.9992) and a detection limit (LOD) of 25.0 CFU mL-1 for E. coli detection. Additionally, the technique is highly selective with no interference even from the molecules that have shown to react with OPD to form oxidized OPD. The developed device demonstrates accuracy and precision for E. coli quantification in food samples with recovery percentages between 98.3 and 104.7% and the highest relative standard deviation (RSD) of 4.55%. T-test validation shows no significant difference in E. coli concentration measured between our method and a commercial assay. The proposed dPAD sensor has the potential for selective and affordable E. coli determination  in food samples without requiring sample preparation. Furthermore, this strategy can be extended to monitor other molecules for which MIP can be developed and integrated into paper-microfluidic platform.

Assessment of Impact of Dietary Patterns on Obstructive Sleep Apnea Patients.

Objective Obstructive sleep apnea syndrome (OSAS) is characterized by episodic cessations of breathing due to upper airway obstruction during sleep, which may cause disturbances in dietary patterns resulting from appetite-related hormonal changes. The aim of the present study was to investigate the relationship between OSAS and nutritional and dietary patterns. Materials and Methods A total of 20 female and 53 male OSAS patients aged > 30 years were enrolled. Demographic data, as well as data on smoking and alcohol habits, were noted, anthropometric measures were made, and a questionnaire regarding chronic diseases including OSAS and four questionnaires on recent food intake frequency and content of nutrition were filled out. The content of nutrition was noted under seven categories: meat, legumes, milk and dairy products, fruits and vegetables, bread and cereals, fat and carbohydrates, and beverages. Results The severity of OSAS (assessed by the apnea-hypopnea index. AHI) was positively correlated with the body mass index (BMI), the circumferences of the waist, chest, and buttocks, and, in males, with the circumference of the neck as well. There was no correlation between the AHI and nutritional habits in terms of the frequency of meals or snacks, the scores on the Snoring, Tiredness, Observed Apnea, and High Blood Pressure-Body Mass Index, Age, Neck Circumference, and Gender (STOP-BANG) Questionnaire and the corresponding macro- and micronutrients. Worsening apnea scores led to increased intake of macronutrients of carbohydrate and protein and micronutrients of niacin and pyridoxine ( p < 0.05), and decreased intake of fat ( p < 0.05). Conclusion The present study demonstrated an association between OSAS severity and recent food intake, manifested in increased intake of carbohydrates, niacin, and pyridoxine, and decreased fat intake.