Impact of plasmolysis process on the enrichment of brewer's spent yeast biomass with vitamin D3 by biosorption followed by spray-drying process.

Vitamin D3(cholecalciferol)plays a crucial role in various physiological processes. However, vitamin D3 deficiency is a major public health problem affecting millions of people. Therefore, it is important to develop effective strategies that ensure the protection and stability of this important vitamin for food supplementation and fortification. This work aimed to impregnate intact and plasmolyzedSaccharomyces pastorianus brewer's yeast biomass with cholecalciferol using a biosorption process followed by spray drying to characterize the obtained material in terms of morphology, average particle size, zeta potential, moisture, water activity, FT-IR, and the stability of the encapsulated vitamin during the drying and storage process. Plasmolysis proved to be an effective method for improving the biosorption efficiency, retention during spray drying, and stability of vitamin D3. In addition, this process promoted an increase in cell size, which favored the dispersion stability of the system, as evidenced by the zeta potential values. These results contribute to the understanding of a new method for delivering this vitamin that conforms to environmentally conscious practices.

Undifferentiated Cells of Tessaria absinthioides with High Nutritional Value and Health-Promoting Phytochemicals. An Approach Based on Plant Cellular Agriculture.

In vitro cultures of undifferentiated plant cells of Tessaria absinthioides, a native herb popularly recognized and used for its health benefits, were studied as potential food supplements. These tissues were incubated under two light conditions, and the biomass obtained was freeze-dried and oven-dried. To evaluate their nutritional value, their physicochemical and functional properties were determined. Although in some cases there were significant differences in the results according to the drying methodology applied, all these tissues presented a high proportion of proteins (23.6-28.3%), a low percentage of fats (< 2%) constituted mainly by phytosterols, and a significant amount of crude fibers (6.9-9.0%) and ashes (> 10%). In addition, the freeze-dried calli resulted in a product with better functional properties. On the other hand, their phytochemical profiles and antioxidant capacity were studied and compared with tissues from wild specimens and with green tea and chamomile as reference extracts.

Exploring the Potential of Wild Andean Blueberries for Powdered Juice Production through Spray Drying.

The Andean blueberry (Vaccinium meridionale Sw) is an underutilized wild fruit native to South America. It is known for its antioxidant properties and potential health benefits. In this study, Andean blueberry juice powders were produced via spray drying, using maltodextrin (MD), gum Arabic (GA) or a combination of both (MD:GA) as wall materials. The spray-dried juices were analyzed for the recovery percentage of total polyphenols and monomeric anthocyanins, as well as for their physicochemical and technological properties. Results showed that the type of carrier agent used caused statistically significant differences in the bioactive content and the antioxidant activity of the powders (p < 0.05). It was found that the MD samples has the highest monomeric anthocyanins content (0.88 ± 0.02 mg cyanidin 3-glucoside equivalents/g) and the highest anthocyanins recovery (96.3 ± 1.7%), while the MD:GA powders showed the highest values of total polyphenol content (5.70 ± 0.09 mg gallic acid equivalents/g), DPPH scavenging capacity (2.49 ± 0.02 mg gallic acid equivalents/g) and phenolics recovery (87.2 ± 1.1%). Furthermore, all the spray-dried powders exhibited low moisture content (<5.5%) and water activity (<0.40), as well as high solubility in water (>94%) and good flowability. Future prospects include evaluating the stability of the Andean blueberry juice powders during storage and exploring the formulation of new foods and beverages that incorporate these spray-dried powders.

High fiber content snack bars made with maize biomass flour, rice flakes and oat flakes: Physicochemical properties and sensory acceptance.

The aim of this study was to assess physicochemical properties and sensory acceptance of snack bars (SBs) made with different levels of maize biomass flour (MBF), rice flakes (RF) and oat flakes (OF). A simplex design was used, with 6 mixtures and 2 repetitions. The different levels of MBF, RF and OF used in the SBs influenced all physicochemical properties evaluated (moisture, water activity, specific volume, hardness and instrumental color). SB4 (containing 14.85:5:10.85% of MBF:RF:OF, respectively) and SB6 (containing 14:8:8% of MBF:RF:OF, respectively) were the closest to the desirable formulation according to the desirability diagram for the physicochemical properties of the SBs. SB1 (containing 20:5:5% of MBF:RF:OF, respectively) was also selected for sensory analysis as it showed the highest MBF content among all formulations. None SBs presented a microbiological risk. The SB6 presented the highest sensory acceptance and purchase intent, highlighting its rich content of dietary fiber (16.45 ± 0.1 g/100 g) and protein (7.04 ± 0.02 g/100 g) besides its low-calorie characteristic (1421.22 kJ/100 g/339.68 kcal/100 g). The development of SBs using MBF is feasible in relation to their physicochemical and sensory properties, which can stimulate the sustainable production of new goods from this by-product.

Trans-Fat Labeling in Packaged Foods Sold in Brazil Before and After Changes in Regulatory Criteria for Trans-Fat-Free Claims on Food Labels.

Consumption of industrially produced trans-fat acids (TFA) is a public health concern. Therefore, it is important that information on TFA in packaged foods be clearly informed to consumers. This study aimed to assess the evolution of TFA information presented in packaged foods sold in Brazil in 2010 and 2013, before and after the introduction of stricter regulatory requirements for TFA-free claims on food labels. A repeated cross-sectional study was performed through food label censuses of all packaged foods available for sale in two stores from the same supermarket chain, totaling 2,327 foods products in 2010 and 3,176 in 2013. TFA-free claims and information indicating TFA in the ingredients list and nutrition facts label were analyzed by descriptive statistics and Pearson's chi-square test. There was a 14% decrease in the use of ingredients containing or potentially containing industrially produced TFA (i-TFA), according to analysis of the ingredients list. However, when analyzing foods by groups, it was found that this decrease was significant only for group A (bakery goods, bread, cereals, and related products; from 59 to 35%, p < 0.001). By contrast, food group F (gravies, sauces, ready-made seasonings, broths, soups, and ready-to-eat dishes) showed a 5% increase in i-TFA. The use of specific terms for i-TFA decreased between 2010 and 2013, but there was an increase in the use of alternative terms, such as vegetable fat and margarine, which do not allow consumers to reliably identify whether a food product is a possible source of i-TFA. There was an 18% decrease in the use of TFA-free claims in products containing or potentially containing i-TFA. However, almost one-third of foods sold in 2013 were false negatives, that is, foods reported to contain 0 g of TFA in the nutrition facts label or with TFA-free claims but displaying specific or alternative terms for i-TFA in the ingredients list. The results indicate that adoption of stricter requirements for TFA-free claims on food labels in Brazil helped reduce the prevalence of such claims but was not sufficient to decrease i-TFA in industrialized foods sold in supermarkets.

Structural and Physicochemical Characterization of Extracted Proteins Fractions from Chickpea (Cicer arietinum L.) as a Potential Food Ingredient to Replace Ovalbumin in Foams and Emulsions.

Chickpeas are the third most abundant legume crop worldwide, having a high protein content (14.9-24.6%) with interesting technological properties, thus representing a sustainable alternative to animal proteins. In this study, the surface and structural properties of total (TE) and sequential (ALB, GLO, and GLU) protein fractions isolated from defatted chickpea flour were evaluated and compared with an animal protein, ovalbumin (OVO). Differences in their physicochemical properties were evidenced when comparing TE with ALB, GLO, and GLU fractions. In addition, using a simple and low-cost extraction method it was obtained a high protein yield (82 ± 4%) with a significant content of essential and hydrophobic amino acids. Chickpea proteins presented improved interfacial and surface behavior compared to OVO, where GLO showed the most significant effects, correlated with its secondary structure and associated with its flexibility and higher surface hydrophobicity. Therefore, chickpea proteins have improved surface properties compared to OVO, evidencing their potential use as foam and/or emulsion stabilizers in food formulations for the replacement of animal proteins.

Ultrasound: a suitable technology to improve the extraction and techno-functional properties of vegetable food proteins.

Vegetable-based proteins may be extracted from different sources using different extraction methods, among them, ultrasound-assisted extraction stands out. This review presents the current knowledge on ultrasound-assisted extraction (UAE) and the functional properties of extracted vegetable proteins. Ultrasound generates cavitation in a liquid medium, defined as gas and vapor microbubbles collapse under pressure changes large enough to separate them in the medium. Cavitation facilitates the solvent and solid interaction, increasing yield and reducing extraction periods and temperature used. Moreover, ultrasound treatment changed extracted protein properties such as solubility, hydrophobicity, emulsifying and foam, water and oil absorption capacity, viscosity, and gelatinization. Ultrasound-assisted extraction is a promising technique for the food technology sector, presenting low environmental impact, lower energy and solvent consumption, and it is in accordance with green chemistry technology and sustainable concepts.

Identifying the composition of commercial Brazilian cat food with stable isotopes of carbon and nitrogen.

Considering the increasing pet owner's concern about the food their pets are consuming, in this study we investigated the origin of the main ingredients in wet and dry foods produced in Brazil using stable isotope ratios of carbon and nitrogen. We concluded that chicken and pork seem to be the dominant ingredients in most of the samples, with larger proportions in wet cat food. Even in pet foods showing 'beef' as the main ingredient on the label, we found a low proportion of bovine products in both wet and dry cat foods. Comparing the contribution of plant-derived products (C3 and C4 plants) and animal-derived products (chicken-pork, bovine and fish), approximately 21 % of cat foods had more than 30 % of ingredients with plant origin in their composition. The high amount of plant-derived products in cat foods found here raises the question whether this should be mentioned on package labels.

The addition of golden flaxseed flour (Linum usitatissimum L.) in chicken burger: Effects on technological, sensory, and nutritional aspects.

Five different concentrations of golden flaxseed flour (0%: F0 (control), 5%: F1, 10%: F2, 15%: F3, 20%: F4) were used as a functional ingredient to replace the fat in chicken burgers. The products were analyzed for moisture, protein, carbohydrate, fat, ash, shear force, consumer acceptance, and their sensory and technological characteristics. The fat, carbohydrate, and protein contents of the raw hamburgers did not differ significantly. An increase in golden flaxseed flour concentration caused a decrease in moisture content and an increase in ash content. The addition of golden flaxseed flour positively affected the technological characteristics and increases in the yield and water retention capacity were observed, together with decreases in shrinkage and mechanical resistance. Formulation F1 presented the highest average acceptance, which did not differ from the F0, and the latter also did not differ from F2. The F3 and F4 formulations differed from the others, with lower average values for acceptance. The check-all-that-apply method revealed that the formulations F0, F1, and F2 were described by sensory terms that corresponded to the desired sensory characteristics. The addition of golden flaxseed flour improved the technological characteristics and the biofunctional potential arising from its bioactive compounds, making it an option as an ingredient for meat products.

Biological Active Ecuadorian Mango 'Tommy Atkins' Ingredients-An Opportunity to Reduce Agrowaste.

Mango is a commercially important tropical fruit. During its processing, peel and seed kernel are discarded as waste but they could be recovered as an excellent and cost-effective source of health-promoting ingredients. This study aimed to characterize some of them, including carotenoids like the provitamin A ß-carotene and lutein, with an interest beyond its role in eye health. Other health-promoting compounds like tocopherols and polyphenols were also evaluated, as well as the in vitro antioxidant capacity of mango by-products. Regarding isoprenoids, α-tocopherol was mainly found in the peels and carotenoids concentration was higher in the pulps. ß-carotene was the most abundant carotene in pulp and seed kernel, whereas peel was the only source of lutein, with violaxanthin the most abundant xanthophyll in the different mango organs tested. With regard to polyphenols, peels exhibited greater variability in its phenolic composition, being the total content up to 85 and 10 times higher than the pulp and seed kernels, respectively. On the other hand, peels also stood out for being a very rich source of mangiferin. Seed kernels and peels showed higher antioxidant capacity values than the pulps. These results contribute to the valorization of mango by-products as new natural ingredients for the pharma and food industries.

Comparative study of the physicochemical, compositional and functional properties of eight flours obtained from different plant materials found in Colombia.

The physicochemical, compositional and functional properties of flour from green plantains (Musa acuminata) of the large green plantain variety, oyster mushrooms (Pleorotus ostreatus), pineapple peel (Ananas comosus) of the 'apple pineapple' variety, yellow peas (Pisum sativum), chickpeas (Cicer arietinum), whole grain rice (Oryza sativa), whole grain corn (Zea mays) and whole grain white quinoa (Chenopodium quinoa) were evaluated by using one-way analysis of variance, Pearson correlations and principal component analysis chemical composition of the eight flours, statistically differed (p < 0.05). Oyster mushroom and yellow pea flours had the greatest protein content (28.92 and 21.02%, respectively), whereas the pineapple peel, peas and corn stood out for their high contents of Fe and Zn. All flours exhibited emulsifying and foaming activities, while hydration and interfacial properties showed statistically significant negative correlations. There was a clear relationship between levels of protein and carbohydrates and gelation and syneresis phenomena in thermally treated flour suspensions. According to principal component analysis of functional, physicochemical and compositional properties, flours were classified into five groups of raw materials: (1) yellow peas, (2) chickpeas, rice, corn and quinoa, (3) green plantain, (4) pineapple peel and (5) oyster mushrooms. Results are promising to formulate mixes and composite flours for fortification and/or enrichment of food products by using different technological processes.

Dietary fibre concentrate from Chilean algarrobo (Prosopis chilensis (Mol.) Stuntz) pods: purification and characterization.

Prosopis species are generally fast-growing, drought-resistant, nitrogen-fixing trees or shrubs. Fruits of Prosopis spp are indehiscent pods, where pericarp is formed by the epicarp, light brown in colour, and fibrous nature; the mesocarp known as pulp, which is rich in sugars; and the endocarp. The aim of this work was to obtain a fibre concentrate from the pods of Prosopis chilensis Mol. (Stuntz) and to determine the chemical, physical, and technological properties of the pod flour (PF) and of a fibre concentrate or pod purified flour (PPF). Acetone, ethanol, and water at different conditions of time and temperature were used in the purification process. PF showed 53.7 g/100 g of total sugar content, 4.2 g/100 g of reducing sugar content, 41.8 g/100 g of total dietary fibre, 35.8 g/100 g of insoluble fibre, and 6.0 g/100 g of soluble fibre content. The PPF has a total sugar content of 3.8 g/100 g, reducing sugar content of 2.2 g/100 g, total dietary fibre content of 80.8 g/100 g, insoluble fibre content of 75.1 g/100 g, and soluble fibre content of 5.7 g/100 g. The scanning electron microscopy analysis showed the existence of voids in the structure of PPF flour, which reveals the efficiency of the purification process with a high decrease in the total sugar content.