Molecular Bridging Induced Anti-salting-out Effect Enabling High Ionic Conductive ZnSO4-based Hydrogel for Quasi-solid-state Zinc Ion Batteries.

Hydrogel electrolytes (HEs) hold great promise in tackling severe issues emerging in aqueous zinc-ion batteries, but the prevalent salting-out effect of kosmotropic salt causes low ionic conductivity and electrochemical instability. Herein, a subtle molecular bridging strategy is proposed to enhance the compatibility between PVA and ZnSO4 from the perspective of hydrogen-bonding microenvironment re-construction. By introducing urea containing both an H-bond acceptor and donor, the broken H-bonds between PVA and H2O, initiated by the SO42--driven H2O polarization, could be re-united via intense intermolecular hydrogen bonds, thus leading to greatly increased carrying capacity of ZnSO4. The urea-modified PVA-ZnSO4 HEs featuring a high ionic conductivity up to 31.2 mS cm-1 successfully solves the sluggish ionic transport dilemma at the solid-solid interface. Moreover, an organic solid-electrolyte-interphase can be derived from the in-situ electro-polymerization of urea to prohibit H2O-involved side reactions, thereby prominently improving the reversibility of Zn chemistry. Consequently, Zn anodes witness an impressive lifespan extension from 50 h to 2200 h at 0.1 mA cm-2 while the Zn-I2 full battery maintains a remarkable Coulombic efficiency (>99.7%) even after 8000 cycles. The anti-salting-out strategy proposed in this work provides an insightful concept for addressing the phase separation issue of functional HEs.

Wood-inspired anisotropic hydrogel electrolyte with large modulus and low tortuosity realizing durable dendrite-free zinc-ion batteries.

While aqueous zinc-ion batteries exhibit great potential, their performance is impeded by zinc dendrites. Existing literature has proposed the use of hydrogel electrolytes to ameliorate this issue. Nevertheless, the mechanical attributes of hydrogel electrolytes, particularly their modulus, are suboptimal, primarily ascribed to the substantial water content. This drawback would severely restrict the dendrite-inhibiting efficacy, especially under large mass loadings of active materials. Inspired by the structural characteristics of wood, this study endeavors to fabricate the anisotropic carboxymethyl cellulose hydrogel electrolyte through directional freezing, salting-out effect, and compression reinforcement, aiming to maximize the modulus along the direction perpendicular to the electrode surface. The heightened modulus concurrently serves to suppress the vertical deposition of the intermediate product at the cathode. Meanwhile, the oriented channels with low tortuosity enabled by the anisotropic structure are beneficial to the ionic transport between the anode and cathode. Comparative analysis with an isotropic hydrogel sample reveals a marked enhancement in both modulus and ionic conductivity in the anisotropic hydrogel. This enhancement contributes to significantly improved zinc stripping/plating reversibility and mitigated electrochemical polarization. Additionally, a durable quasi-solid-state Zn//MnO2 battery with noteworthy volumetric energy density is realized. This study offers unique perspectives for designing hydrogel electrolytes and augmenting battery performance.

Limiting Interfacial Free Water and Proton Concentration by Hydrogel Electrolytes for Stable MoO3 Anode in a Proton Battery.

Aqueous rechargeable proton batteries are attractive due to the small ionic radius, light mass, and ultrafast diffusion kinetics of proton as charge carriers. However, the commonly used acidic electrolyte is usually very corrosive to the electrode material, which seriously affects the cycle life of the battery. Here, it is proposed that decreasing water activity and limiting proton concentration can effectively prevent side reactions of the MoO3 anode such as corrosion and hydrogen precipitation by using a lean-water hydrogel electrolyte. The as-prepared polyacrylamide (PAAM)-poly2-acrylamide-2-methylpropanesulfonic acid (PAMPS)/MnSO4 (PPM) hydrogel electrolyte not only has abundant hydrophilic groups that can form hydrogen bonds with free water and inhibit solvent-electrode interaction, but also has fixed anions that can maintain a certain interaction with protons. The assembled MoO3||MnO2 full battery can stably cycle over 500 times for ≈350 h with an unprecedented capacity retention of 100% even at a low current density of 0.5 A g-1. This work gives a hint that limiting free water as well as proton concentration is important for the design of electrolytes or interfaces in aqueous proton batteries.

Molecular Engineering Enables Hydrogel Electrolyte with Ionic Hopping Migration and Self-Healability toward Dendrite-Free Zinc-Metal Anodes.

Hydrogel electrolytes (HEs), characterized by intrinsic safety, mechanical stability, and biocompatibility, can promote the development of flexible aqueous zinc-ion batteries (FAZIBs). However, current FAZIB technology is severely restricted by the uncontrollable dendrite growth arising from undesirable reactions between the HEs with sluggish ionic conductivity and Zn metal. To overcome this challenge, this work proposes a molecular engineering strategy, which involves the introduction of oxygen-rich poly(urea-urethane) (OR-PUU) into polyacrylamide (PAM)-based HEs. The OR-PUU/PAM HEs facilitate rapid ion transfer through their ionic hopping migration mechanism, resulting in uniform and orderly Zn2+ deposition. The abundant polar groups on the OR-PUU molecules in OR-PUU/PAM HEs break the inherent H-bond network, tune the solvation structure of hydrated Zn2+, and inhibit the occurrence of side reactions. Moreover, the interaction of hierarchical H-bonds in the OR-PUU/PAM HEs endows them with self-healability, enabling in situ repair of cracks induced by plating/stripping. Consequently, Zn symmetric cells incorporating the novel OR-PUU/PAM HEs exhibit a long cycling life of 2000 h. The resulting Zn-MnO2 battery displays a low capacity decay rate of 0.009% over 2000 cycles at 2000 mA g-1. Overall, this work provides valuable insights to facilitate the realization of dendrite-free Zn-metal anodes through the molecular engineering of HEs.

Suppressing Rampant and Vertical Deposition of Cathode Intermediate Product via PH Regulation Toward Large-Capacity and High-Durability Zn//MnO2 Batteries.

Despite great prospects, Zn//MnO2 batteries suffer from rampant and vertical deposition of zinc sulfate hydroxide (ZSH) at the cathode surface, which leads to a significant impact on their electrochemical performance. This phenomenon is primarily due to the drastic increase in the electrolyte pH value upon discharging, which is closely associated with the electrodissolution of Mn-based active materials. Herein, the pH value change is effectively inhibited by employing an electrolyte additive with excellent pH buffering capability. As such, the formation of ZSH at the cathode is postponed, resulting in the deposition of ZSH in a horizontal arrangement. This strategy can significantly enhance the utilization efficiency of cathode active material, while also enabling a solid electrolyte interphase layer at the Zn anode to address low Zn stripping/plating reversibility. With the optimal electrolyte, the Zn//MnO2 battery realizes a 25.6% increase in the specific capacity at 0.2 A g-1 compared to that with the baseline electrolyte, great rate capability (161.6 mAh g-1 at 5 A g-1 ), and superior capacity retention (90.2% over 5,000 cycles). In addition, the pH buffering strategy is highly applicable in hydrogel electrolytes. This work underscores the importance of pH regulation for Zn//MnO2 batteries and provides enlightening insights.

Coupling of Adhesion and Anti-Freezing Properties in Hydrogel Electrolytes for Low-Temperature Aqueous-Based Hybrid Capacitors.

Solid-state zinc-ion capacitors are emerging as promising candidates for large-scale energy storage owing to improved safety, mechanical and thermal stability and easy-to-direct stacking. Hydrogel electrolytes are appealing solid-state electrolytes because of eco-friendliness, high conductivity and intrinsic flexibility. However, the electrolyte/electrode interfacial contact and anti-freezing properties of current hydrogel electrolytes are still challenging for practical applications of zinc-ion capacitors. Here, we report a class of hydrogel electrolytes that couple high interfacial adhesion and anti-freezing performance. The synergy of tough hydrogel matrix and chemical anchorage enables a well-adhered interface between hydrogel electrolyte and electrode. Meanwhile, the cooperative solvation of ZnCl2 and LiCl hybrid salts renders the hydrogel electrolyte high ionic conductivity and mechanical elasticity simultaneously at low temperatures. More significantly, the Zn||carbon nanotubes hybrid capacitor based on this hydrogel electrolyte exhibits low-temperature capacitive performance, delivering high-energy density of 39 Wh kg-1 at -60 °C with capacity retention of 98.7% over 10,000 cycles. With the benefits of the well-adhered electrolyte/electrode interface and the anti-freezing hydrogel electrolyte, the Zn/Li hybrid capacitor is able to accommodate dynamic deformations and function well under 1000 tension cycles even at -60 °C. This work provides a powerful strategy for enabling stable operation of low-temperature zinc-ion capacitors.

A Bio-Inspired Methylation Approach to Salt-Concentrated Hydrogel Electrolytes for Long-Life Rechargeable Batteries.

Hydrogel electrolytes hold great promise in developing flexible and safe batteries, but the presence of free solvent water makes battery chemistries constrained by H2 evolution and electrode dissolution. Although maximizing salt concentration is recognized as an effective strategy to reduce water activity, the protic polymer matrices in classical hydrogels are occupied with hydrogen-bonding and barely involved in the salt dissolution, which sets limitations on realizing stable salt-concentrated environments before polymer-salt phase separation occurs. Inspired by the role of protein methylation in regulating intracellular phase separation, here we transform the "inert" protic polymer skeletons into aprotic ones through methylation modification to weaken the hydrogen-bonding, which releases free hydrogen bond acceptors as Lewis base sites to participate in cation solvation and thus assist salt dissolution. An unconventionally salt-concentrated hydrogel electrolyte reaching a salt fraction up to 44 mol % while retaining a high Na+ /H2 O molar ratio of 1.0 is achieved without phase separation. Almost all water molecules are confined in the solvation shell of Na+ with depressed activity and mobility, which addresses water-induced parasitic reactions that limit the practical rechargeability of aqueous sodium-ion batteries. The assembled Na3 V2 (PO4 )3 //NaTi2 (PO4 )3 cell maintains 82.8 % capacity after 580 cycles, which is the longest cycle life reported to date.

Salting-Out Effect Realizing High-Strength and Dendrite-Inhibiting Cellulose Hydrogel Electrolyte for Durable Aqueous Zinc-Ion Batteries.

Aqueous zinc-ion batteries are limited by poor Zn stripping/plating reversibility. Not only can hydrogel electrolytes address this issue, but also they are suitable for constructing flexible batteries. However, there exists a contradiction between the mechanical strength and the ionic conductivity for hydrogel electrolytes. Herein, high-concentration kosmotropic ions are introduced into the cellulose hydrogel electrolyte to take advantage of the salting-out effect. This can significantly improve both the mechanical strength and ionic conductivity. Additionally, the obtained cellulose hydrogel electrolyte (denoted as Con-CMC) has strong adhesion, a wide electrochemical stability window, and good water retaining ability. The Con-CMC is also found to accelerate the desolvation process, improve Zn deposition kinetics, promote Zn deposition along the (002) plane, and suppress parasitic reactions. Accordingly, the Zn/Zn cell with Con-CMC demonstrates dendrite-free behavior with prolonged lifespan and can endure extremely large areal capacity of 25 mAh cm-2. The Con-CMC also enables a large average Coulombic efficiency of 99.54% over 500 cycles for the Zn/Cu cell. Furthermore, the assembled pouch-type Zn/polyaniline full battery provides great rate capability, superior cyclability (even with limited Zn anode excess), a slow self-discharge rate, and outstanding affordability to external forces. Overall, this work extends our knowledge of the rational design of hydrogel electrolytes.

Hydrogel Electrolyte Enabled High-Performance Flexible Aqueous Zinc Ion Energy Storage Systems toward Wearable Electronics.

To cater to the swift advance of flexible wearable electronics, there is growing demand for flexible energy storage system (ESS). Aqueous zinc ion energy storage systems (AZIESSs), characterizing safety and low cost, are competitive candidates for flexible energy storage. Hydrogels, as quasi-solid substances, are the appropriate and burgeoning electrolytes that enable high-performance flexible AZIESSs. However, challenges still remain in designing suitable and comprehensive hydrogel electrolyte, which provides flexible AZIESSs with high reversibility and versatility. Hence, the application of hydrogel electrolyte-based AZIESSs in wearable electronics is restricted. A thorough review is required for hydrogel electrolyte design to pave the way for high-performance flexible AZIESSs. This review delves into the engineering of desirable hydrogel electrolytes for flexible AZIESSs from the perspective of electrolyte designers. Detailed descriptions of hydrogel electrolytes in basic characteristics, Zn anode, and cathode stabilization effects as well as their functional properties are provided. Moreover, the application of hydrogel electrolyte-based flexible AZIESSs in wearable electronics is discussed, expecting to accelerate their strides toward lives. Finally, the corresponding challenges and future development trends are also presented, with the hope of inspiring readers.

Completely Activated and Phase-Transformed KFeMnHCF for Zn/K Hybrid Batteries with 14 500 Cycles by an OH-Rich Hydrogel Electrolyte.

Metal hexacyanoferrates are recognized as superior cathode materials for zinc and zinc hybrid batteries, particularly the Prussian blue analog (PBA). However, PBA development is hindered by several limitations, including small capacities (<70 mAh g-1 ) and short lifespans (<1000 cycles). These limitations generally arise due to incomplete activation of redox sites and structure collapse during intercalation/deintercalation of metal ions in PBAs. According to this study, the adoption of a hydroxyl-rich (OH-rich) hydrogel electrolyte with extended electrochemical stability windows (ESWs) can effectively activate the redox site of low-spin Fe of the Kx Fey Mn1-y [Fe(CN)6 ]w ·zH2 O (KFeMnHCF) cathode while tuning its structure. Additionally, the strong adhesion of the hydrogel electrolyte inhibits KFeMnHCF particles from falling off the cathode and dissolving. The easy desolvation of metal ions in the developed OH-rich hydrogel electrolytes can lead to a fast and reversible intercalation/deintercalation of metal ions in the PBA cathode. As a result, the Zn||KFeMnHCF hybrid batteries achieve the unprecedented characteristics of 14 500 cycles, a 1.7 V discharge plateau, and a 100 mAh g-1 discharge capacity. The results of this study provide a new understanding of the development of zinc hybrid batteries with PBA cathode materials and present a promising new electrolyte material for this application.

Single-Ion-Conducting Hydrogel Electrolytes Based on Slide-Ring Pseudo-Polyrotaxane for Ultralong-Cycling Flexible Zinc-Ion Batteries.

Flexible zinc-ion batteries (ZIBs) with high capacity and long cycle stability are essential for wearable electronic devices. Hydrogel electrolytes have been developed to provide ion-transfer channels while maintaining the integrity of ZIBs under mechanical strain. However, hydrogel matrices are typically swollen with aqueous salt solutions to increase ionic conductivity, which can hinder intimate contact with electrodes and reduce mechanical properties. To address this, a single-Zn-ion-conducting hydrogel electrolyte (SIHE) is developed by integrating polyacrylamide network and pseudo-polyrotaxane structure. The SIHE exhibits a high Zn2+ transference number of 0.923 and a high ionic conductivity of 22.4 mS cm-1 at room temperature. Symmetric batteries with SIHE demonstrate stable Zn plating/stripping performance for over 160 h, with a homogenous and smooth Zn deposition layer. Full cells with La-V2 O5 cathodes exhibit a high capacity of 439 mA h g-1 at 0.1 A g-1 and excellent capacity retention of 90.2% after 3500 cycles at 5 A g-1 . Moreover, the flexible ZIBs display stable electrochemical performance under harsh conditions, such as bending, cutting, puncturing, and soaking. This work provides a simple design strategy for single-ion-conducting hydrogel electrolytes, which could pave the way for long-life aqueous batteries.

Hydrogel Electrolyte with High Tolerance to a Wide Spectrum of pHs and Compressive Energy Storage Devices Based on It.

Normally, hydrogel electrolytes widely used in flexible energy storage devices have limited tolerance to different pHs. Most gel electrolytes will lose their compressible capability when the adaptable pH is changed. Herein, a poly(acrylamide3 -co-(sulfobetaine methacrylate)1 )@polyacrylamide (P(A3 -co-S1 )@PAM) hydrogel electrolyte equipped with a dual crosslinking network (DN) is successfully fabricated, which exhibits excellent tolerance to any pHs, endowing various energy storage devices including batteries and supercapacitors with superior mechanical durability. The batteries with mild and alkaline P(A3 -co-S1 )@PAM electrolytes display superior stability (over 3000 cycles). Additionally, a Zn||MnO2 battery based on the P(A3 -co-S1 )@PAM hydrogel electrolyte (mild) under 50% compression strain also shows excellent charge-discharge stability and high capacity at 152.4 mAh g-1 after 600 cycles. The strong reversible hydrogen bonds and electrostatic forces originating from zwitterionic structures of poly(sulfobetaine methacrylate) play an important role in dissipating and dispersing energy imposed abruptly. Meanwhile, the zwitterionic structure and intermolecular NH⋯OC hydrogen bonds of the hydrogel lead to the property of acid resistance and alkali resistance. The tough and robust covalent crosslinking bonds and the tight arrangement of DN polymer chains enable the hydrogel electrolytes to recover their initial shape fast once unloading.

Bottom-Up Design of a Green and Transient Zinc-Ion Battery with Ultralong Lifespan.

Transient batteries are expected to lessen the inherent environmental impact of traditional batteries that rely on toxic and critical raw materials. This work presents the bottom-up design of a fully transient Zn-ion battery (ZIB) made of nontoxic and earth-abundant elements, including a novel hydrogel electrolyte prepared by cross-linking agarose and carboxymethyl cellulose. Facilitated by a high ionic conductivity and a high positive zinc-ion species transference number, the optimized hydrogel electrolyte enables stable cycling of the Zn anode with a lifespan extending over 8500 h for 0.25 mA cm-2 - 0.25 mAh cm-2 . On pairing with a biocompatible organic polydopamine-based cathode, the full cell ZIB delivers a capacity of 196 mAh g-1 after 1000 cycles at a current density of 0.5 A g-1 and a capacity of 110 mAh g-1 after 10 000 cycles at a current density of 1 A g-1 . A transient ZIB with a biodegradable agarose casing displays an open circuit voltage of 1.123 V and provides a specific capacity of 157 mAh g-1 after 200 cycles at a current density of 50 mA g-1 . After completing its service life, the battery can disintegrate under composting conditions.

Manipulating Deposition Behavior by Polymer Hydrogel Electrolyte Enables Dendrite-Free Zinc Anode for Zinc-Ion Hybrid Capacitors.

Rechargeable aqueous zinc-ion hybrid capacitors (ZHCs) have aroused unprecedented attention because of their high safety, cost effectiveness, and environmental compatibility. However, the intractable issues of dendrite growth and side reactions at the electrode-electrolyte interface deteriorate durability and reversibility of Zn anodes, deeply encumbering the large-scale application of ZHCs. Concerning these obstacles, a negatively charged carboxylated chitosan-intensified hydrogel electrolyte (CGPPHE) with cross-linked networks is reported to stabilize Zn anodes. Beyond possessing good mechanical characteristics, the CGPPHE with polar groups can reduce the desolvation energy barrier of hydrated Zn2+ , constrain the 2D Zn2+ diffusion, and uniformize electric field and Zn2+ flux distributions, assuring dendrite-free Zn deposition with high plating-stripping efficiency. Concurrently, the hydrophilic CGPPHE alleviates harmful hydrogen evolution and corrosion by abating water activity. Accordingly, Zn|CGPPHE|Zn and Zn|CGPPHE|Cu cells exhibit an extended life exceeding 350 h (1600 mAh cm-2 cumulative capacity under 20 mA cm-2 ) and a high average coulombic efficiency of 98.2%, respectively. The resultant flexible ZHCs with CGPPHE and template-regulated carbon cathode present perfect properties in capacity retention (97.7% over 10 000 cycles), energy density (91.8 Wh kg-1 ), and good mechanical adaptability. This study provides insight into developing novel hydrogel electrolytes toward highly rechargeable and stable ZHCs.

Tuning Zn2+ coordination tunnel by hierarchical gel electrolyte for dendrite-free zinc anode.

Aqueous zinc-ion batteries (ZIBs) are perceived as one of the most upcoming grid-scale storage systems. However, the issues of electrode dissolution, dendrite formation, and corrosion in traditional liquid electrolytes have plagued its progress. In this work, Zn dendrite growth and side reactions are effectively suppressed by a highly-confined tannic acid (TA) modified sodium alginate (SA) composite gel electrolyte (TA-SA). The ion-confinement effect is enhanced by divalent zinc ions coordinated with carboxyl groups and chelated with phenolic hydroxyl groups, thus guiding and regulating Zn deposition to achieve steady zinc plating/stripping behavior. As a consequence, the Zn/TA-SA/NH4V4O10 full cells deliver a high specific capacity of 238.6 mAh g-1 and maintain 94.51% over 900 cycles at 2 A g-1. Notably, after resting over 5 d, the capacity can be stabilized with a capacity retention of 97.25% after 200 cycles at 2 A g-1. This highly-confined and hydrogen bond-strengthened gel electrolyte may provide an effective strategy for the future development of quasi-solid-state metal batteries.

Cellulose-g-poly(2-(dimethylamino)ethylmethacrylate) Hydrogels: Synthesis, Characterization, Antibacterial Testing and Polymer Electrolyte Application.

Hydrogels have been investigated due to their unique properties. These include high water content and biocompatibility. Here, hydrogels with different ratios of poly(2-(dimethylamino)ethylmethacrylate) (PDMAEMA) were grafted onto cellulose (Cel-g-PDMAEMA) by the free radical polymerization method and gamma-ray radiation was applied in order to increase crosslinking and content of PDMAEMA. Gamma irradiation enabled an increase of PDMAEMA content in hydrogels in case of higher ratio of 2-(dimethylamino)ethyl methacrylate in the initial reaction mixture. The swelling of synthesized hydrogels was monitored in dependence of pH (3, 5.5 and 10) during up to 60 days. The swelling increased from 270% to 900%. Testing of antimicrobial activity of selected hydrogel films showed weak inhibitory activity against Escherichia coli, Pseudomonas aeruginosa, and Bacillus subtilis. The results obtained by the cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) indicate that chemically synthesized hydrogels have good characteristics for the supercapacitor application.

Facile and green synthesis of nanocellulose with the assistance of ultraviolet light irradiation for high-performance quasi-solid-state zinc-ion batteries.

Benefiting from excellent mechanical properties, large surface area, rich hydroxyl groups, good sustainability, etc., nanocellulose is highly promising for various applications. However, intense chemical treatment and long-term processing are usually required to fabricate nanocellulose. Herein, a new synthesis method of nanocellulose is developed by using ultraviolet light irradiation-assisted delignification and subsequent sonification. This method is more cost-effective, time-saving, and environmentally benign compared to most of previously reported synthesis methods of nanocellulose. The obtained nanocellulose contains a small amount of lignin, which is unfavorable for high-temperature stability and optimal transparency. However, a small amount of lignin is beneficial to mechanical properties and in-water stability. With this nanocellulose, flexible MnO2 cathode film and hydrogel electrolyte are constructed and a quasi-solid-state zinc-ion battery is assembled. The battery exhibits 233.3 mAh g-1 after 1000 cycles at 1 A g-1 and 20 ℃. And more than half of that capacity can be maintained at -20 ℃. The battery also possesses great rate capability and good endurance to external forces. This work provides new insights into the synthesis and application of nanocellulose.

Self-Healing and Shape-Editable Wearable Supercapacitors Based on Highly Stretchable Hydrogel Electrolytes.

Shape editability combined with a self-healing capability and long-term cycling durability are highly desirable properties for wearable supercapacitors. Most wearable supercapacitors have rigid architecture and lack the capacity for editability into desirable shapes. Through sandwiching hydrogel electrolytes between two electrodes, a suite of wearable supercapacitors that integrate desirable properties namely: repeated shape editability, excellent self-healing capability, and long-term cycling durability is demonstrated. A strategy is proposed to enhance the long-term cycling durability by utilizing hydrogel electrolytes with unique cross-linking structures. The dynamic crosslinking sites are formed by quadruple H bonds and hydrophobic association, stabilizing the supercapacitors from inorganic ion disruption during charge-discharge processes. The fabricated supercapacitors result in the capacitance retention rates of 99.6% and 95.8% after 5000 and 10 000 charge-discharge cycles, respectively, which are much higher than others reported in the literature. Furthermore, the supercapacitor sheets can be repeatedly processed into various shapes without any capacitance loss. The supercapacitors exhibit a 95% capacitance retention rate after five cutting/self-healing cycles, indicative of their excellent self-healing performance. To demonstrate real-life applicability, the wearable supercapacitors are successfully used to power a light-emitting diode and an electronic watch.

Building Ultra-Stable and Low-Polarization Composite Zn Anode Interface via Hydrated Polyzwitterionic Electrolyte Construction.

Aqueous zinc metal batteries are noted for their cost-effectiveness, safety and environmental friendliness. However, the water-induced notorious issues such as continuous electrolyte decomposition and uneven Zn electrochemical deposition remarkably restrict the development of the long-life zinc metal batteries. In this study, zwitterionic sulfobetaine is introduced to copolymerize with acrylamide in zinc perchlorate (Zn(ClO4)2) solution. The designed gel framework with hydrophilic and charged groups can firmly anchor water molecules and construct ion migration channels to accelerate ion transport. The in situ generated hybrid interface, which is composed of the organic functionalized outer layer and inorganic Cl- containing inner layer, can synergically lower the mass transfer overpotential, reduce water-related side reactions and lead to uniform Zn deposition. Such a novel electrolyte configuration enables Zn//Zn cells with an ultra-long cycling life of over 3000 h and a low polarization potential (~ 0.03 V) and Zn//Cu cells with high Coulombic efficiency of 99.18% for 1000 cycles. Full cells matched with MnO2 cathodes delivered laudable cycling stability and impressive shelving ability. Besides, the flexible quasi-solid-state batteries which are equipped with the anti-vandalism ability (such as cutting, hammering and soaking) can successfully power the LED simultaneously. Such a safe, processable and durable hydrogel promises significant application potential for long-life flexible electronic devices.

Regulating Thermogalvanic Effect and Mechanical Robustness via Redox Ions for Flexible Quasi-Solid-State Thermocells.

The design of power supply systems for wearable applications requires both flexibility and durability. Thermoelectrochemical cells (TECs) with large Seebeck coefficient can efficiently convert low-grade heat into electricity, thus having attracted considerable attention in recent years. Utilizing hydrogel electrolyte essentially addresses the electrolyte leakage and complicated packaging issues existing in conventional liquid-based TECs, which well satisfies the need for flexibility. Whereas, the concern of mechanical robustness to ensure stable energy output remains yet to be addressed. Herein, a flexible quasi-solid-state TEC is proposed based on the rational design of a hydrogel electrolyte, of which the thermogalvanic effect and mechanical robustness are simultaneously regulated via the multivalent ions of a redox couple. The introduced redox ions not only endow the hydrogel with excellent heat-to-electricity conversion capability, but also act as ionic crosslinks to afford a dual-crosslinked structure, resulting in reversible bonds for effective energy dissipation. The optimized TEC exhibits a high Seebeck coefficient of 1.43 mV K-1 and a significantly improved fracture toughness of 3555 J m-2, thereby can maintain a stable thermoelectrochemical performance against various harsh mechanical stimuli. This study reveals the high potential of the quasi-solid-state TEC as a flexible and durable energy supply system for wearable applications.