Designing and Testing an IoT Low-Cost PPP-RTK Augmented GNSS Location Device.

Nowadays, the availability of affordable multi-constellation multi-frequency receivers has broadened access to accurate positioning. The abundance of satellite signals coupled with the implementation of ground- and satellite-based correction services has unlocked the potential for achieving real-time centimetre-level positioning with low-cost instrumentation. Most of the current and future applications cannot exploit well-consolidated satellite positioning techniques such as Network Real Time Kinematic (RTK) and Precise Point Positioning (PPP); the former is inapplicable for large user bases due to the necessity of a two-way communication link between the user and the NRTK service provider, while the latter necessitates long convergence times that are not in keeping with kinematic application. In this context, the hybrid PPP-RTK technique has emerged as a potential solution to meet the demand for real-time, low-cost, accurate, and precise positioning. This paper presents an Internet of Things (IoT) GNSS device developed with low-cost hardware; it leverages a commercial PPP-RTK correction service which delivers corrections via IP. The main target is to obtain both horizontal and vertical decimetre-level accuracies in urban kinematic tests, along with other requisites such as solution availability and the provision of connection ports for interfacing an IoT network. A vehicle-borne kinematic test has been conducted to evaluate the device performance. The results show that (i) the IoT device can deliver horizontal and vertical positioning solutions at decimetre-level accuracy with the targeted solution availability, and (ii) the provided IoT ports are feasible for gathering the position solutions over an internet connection.

Low-Cost GNSS and PPP-RTK: Investigating the Capabilities of the u-blox ZED-F9P Module.

GNSS has become ubiquitous in high-precision applications, although the cost of high-end GNSS receivers remains a major obstacle for many applications. Recent advances in GNSS receiver technology have led to the development of low-cost GNSS receivers, making high-precision positioning available to a wider range of users. One such technique for achieving high-precision positioning is Precise Point Positioning-Real Time Kinematic (PPP-RTK). It is a GNSS processing technique that combines the PPP and RTK approaches to provide high-precision positioning in real time without the need for a base station. In this work, we aim to assess the performance of the low-cost u-blox ZED-F9P GNSS module in PPP-RTK mode using the low-cost u-blox ANN-MB antenna. The experiment was designed to investigate both the time it takes the receiver to resolve the phase ambiguity and to determine the positioning accuracies achievable. Results showed that the u-blox ZED-F9P GNSS module could achieve centimeter-level positioning accuracy in about 60 s in PPP-RTK mode. These results make the PPP-RTK technique a good candidate to fulfill the demand for mass-market accurate and robust navigation since uses satellite-based corrections to provide accurate positioning information without the need for a local base station or network. Furthermore, due to its rapid acquisition capabilities and accurate data georeferencing, the technique has the potential to serve as a valuable method to improve the accuracy of the three-S techniques (GIS, remote sensing, and GPS/GNSS).

Non-Contact Thermal and Acoustic Sensors with Embedded Artificial Intelligence for Point-of-Care Diagnostics.

This work involves exploring non-invasive sensor technologies for data collection and preprocessing, specifically focusing on novel thermal calibration methods and assessing low-cost infrared radiation sensors for facial temperature analysis. Additionally, it investigates innovative approaches to analyzing acoustic signals for quantifying coughing episodes. The research integrates diverse data capture technologies to analyze them collectively, considering their temporal evolution and physical attributes, aiming to extract statistically significant relationships among various variables for valuable insights. The study delineates two distinct aspects: cough detection employing a microphone and a neural network, and thermal sensors employing a calibration curve to refine their output values, reducing errors within a specified temperature range. Regarding control units, the initial implementation with an ESP32 transitioned to a Raspberry Pi model 3B+ due to neural network integration issues. A comprehensive testing is conducted for both fever and cough detection, ensuring robustness and accuracy in each scenario. The subsequent work involves practical experimentation and interoperability tests, validating the proof of concept for each system component. Furthermore, this work assesses the technical specifications of the prototype developed in the preceding tasks. Real-time testing is performed for each symptom to evaluate the system's effectiveness. This research contributes to the advancement of non-invasive sensor technologies, with implications for healthcare applications such as remote health monitoring and early disease detection.

Is the Use of a Low-Cost sEMG Sensor Valid to Measure Muscle Fatigue?

Injuries caused by the overstraining of muscles could be prevented by means of a system which detects muscle fatigue. Most of the equipment used to detect this is usually expensive. The question then arises whether it is possible to use a low-cost surface electromyography (sEMG) system that is able to reliably detect muscle fatigue. With this main goal, the contribution of this work is the design of a low-cost sEMG system that allows assessing when fatigue appears in a muscle. To that aim, low-cost sEMG sensors, an Arduino board and a PC were used and afterwards their validity was checked by means of an experiment with 28 volunteers. This experiment collected information from volunteers, such as their level of physical activity, and invited them to perform an isometric contraction while an sEMG signal of their quadriceps was recorded by the low-cost equipment. After a wavelet filtering of the signal, root mean square (RMS), mean absolute value (MAV) and mean frequency (MNF) were chosen as representative features to evaluate fatigue. Results show how the behaviour of these parameters across time is shown in the literature coincides with past studies (RMS and MAV increase while MNF decreases when fatigue appears). Thus, this work proves the feasibility of a low-cost system to reliably detect muscle fatigue. This system could be implemented in several fields, such as sport, ergonomics, rehabilitation or human-computer interactions.

Development and face validation of ultrasound-guided renal biopsy virtual trainer.

The overall prevalence of chronic kidney disease in the general population is ∼14% with more than 661,000 Americans having a kidney failure. Ultrasound (US)-guided renal biopsy is a critically important tool in the evaluation and management of renal pathologies. This Letter presents KBVTrainer, a virtual simulator that the authors developed to train clinicians to improve procedural skill competence in US-guided renal biopsy. The simulator was built using low-cost hardware components and open source software libraries. They conducted a face validation study with five experts who were either adult/pediatric nephrologists or interventional/diagnostic radiologists. The trainer was rated very highly (>4.4) for the usefulness of the real US images (highest at 4.8), potential usefulness of the trainer in training for needle visualization, tracking, steadiness and hand-eye coordination, and overall promise of the trainer to be useful for training US-guided needle biopsies. The lowest score of 2.4 was received for the look and feel of the US probe and needle compared to clinical practice. The force feedback received a moderate score of 3.0. The clinical experts provided abundant verbal and written subjective feedback and were highly enthusiastic about using the trainer as a valuable tool for future trainees.