Extraction of water-soluble polysaccharides from lupin beans and their function of protein dispersion and stabilization under acidic conditions.

In the current environment whereby new sources of proteins are extracted from plant material, it is also important to study the potential use of the resulting side streams. Although a number of studies have been conducted on various polysaccharides extracted from plant raw material, a polysaccharide fraction extracted from lupin bean is yet to be explored, in spite of the emerging interest in this crop as a source of food ingredients. In this work lupin soluble polysaccharide (LuPS) was obtained with a recovery as high as 46 % by extraction at pH 8, 120 °C, for 90 min. This fraction, named LuPS-8, was composed of a mostly linear pectic polysaccharide with a weight average molecular mass of 6608 kg/mol, and containing 71.0 % galactose, with minor amounts of arabinose (16.0 %), glucuronic acid 4.6 %, and galacturonic acid 4.1 %. When added to an acid milk dispersion, LuPS-8 improved its dispersibility, providing storage stability against sedimentation over a wider pH range than a HM-pectin reference, between 3.6-4.4. This research demonstrated the potential for upcycling of a side stream of lupin protein production, by the creation of value-added novel functional polysaccharide.

Lupin Seed Supplementation as a Functional Feed Additive: In Vitro Ruminal Gas, Methane and Carbon Dioxide Production, Fermentation Kinetics, and Nutrient Degradability.

The inevitable enteric gas emission from ruminants is considered a modern-day problem from an environmental perspective. Addressing this problem requires nutritional approaches such as the use of phytogenic additives in ruminant diets. In this regard, lupin seed (LS) can be a useful additive due to its phytochemical constituents. Therefore, this study investigated the effects of lupin (Lupinus angustifolius) seed supplementation as a functional and sustainable feed additive in sheep diet (50:50 concentrate-to-forage ratio) on in vitro gas production (GP; mL/g DM), methane (CH4; mL/g DM) and carbon dioxide (CO2; mL/g DM) emissions, fermentation parameters, and nutrient degradability (g/kg DM incubated). Gas production and CH4 were measured per gram of incubated dry matter (DM), degradable DM (dDM), degradable neutral detergent fiber (dNDF), and degradable acid detergent fiber (dADF). Lupin seeds were included at 0 (control), 0.5, 1.0, 1.5, and 2% of the diet. The seeds contained 3.27% essential oils (DM basis), with eucalyptol as the main phytochemical. The highest GP per gram of DM and dDM was observed (p < 0.01) with 2.0% LS supplementation level. While 1.0% LS had the highest GP per gram of dNDF, 0.5% lupin diet had the highest GP per gram of dADF. Asymptotic GP and CH4 emissions linearly and quadratically increased (p < 0.01) with increasing LS level, while lag time decreased. Despite increased CH4 production, the proportion of CH4 in total biogas was lower (p = 0.008) for LS treatments than the control, with the 0.5% LS showing the lowest CH4 proportion. Production of CO2 increased with lupin seed treatments, with 0.5% LS producing the highest proportion (p = 0.027). Degradability of DM, NDF, and ADF was greater (p < 0.01) for the high LS supplementation level, while 0.5% supplementation level decreased ADF degradability. Total short-chain fatty acids, acetic acid, and propionic acid increased (p < 0.05) with LS supplementation level, leading to a reduced acetate:propionate ratio. Rumen pH decreased (p = 0.036) with LS supplementation, while ammonia-N decreased (p = 0.045) and estimated metabolizable energy increased (p < 0.001) linearly. Calculated microbial protein synthesis (p = 0.005) and gas yield (p = 0.047) increased with LS supplementation level. LS supplementation at 2.0% of diet (DM basis) increased GP and CH4 emission (mL/g DM) and enhanced nutrient degradability, suggesting its potential use as a functional feed additive for ruminants when supplemented at a 2.0% level into diet.

Cramp-Fasciculation Syndrome Associated with Natural and Added Chemicals in Popular Food Items.

Cramp-fasciculation syndrome (CFS) is a rare and benign neuromuscular disorder that may initially masquerade as motor neuron disease/amyotrophic lateral sclerosis. While CFS may have a familial disposition, we report on cases associated with high consumption of popular food items. One set of patients reversibly experienced acute onset of headache, flushing, muscle stiffness and fasciculations following the consumption of umami-flavored food containing a large concentration of monosodium glutamate. A second group of patients consuming food derived from lupin seed developed acute cholinergic toxicity, CFS, and, with chronic intake, significant, self-limiting, but incompletely reversible upper and lower motor neuron deficits. While these cases may improve our knowledge about the possible causes of CFS, our series also demonstrates that excessive consumption of some popular foods is not harmless. This warrants further research on their safety at all stages of human development from a neurological point of view.

Effects of Laccase and Transglutaminase on the Physicochemical and Functional Properties of Hybrid Lupin and Whey Protein Powder.

Plant-based protein is considered a sustainable protein source and has increased in demand recently. However, products containing plant-based proteins require further modification to achieve the desired functionalities akin to those present in animal protein products. This study aimed to investigate the effects of enzymes as cross-linking reagents on the physicochemical and functional properties of hybrid plant- and animal-based proteins in which lupin and whey proteins were chosen as representatives, respectively. They were hybridised through enzymatic cross-linking using two laccases (laccase R, derived from Rhus vernicifera and laccase T, derived from Trametes versicolor) and transglutaminase (TG). The cross-linking experiments were conducted by mixing aqueous solutions of lupin flour and whey protein concentrate powder in a ratio of 1:1 of protein content under the conditions of pH 7, 40 °C for 20 h and in the presence of laccase T, laccase R, or TG. The cross-linked mixtures were freeze-dried, and the powders obtained were assessed for their cross-linking pattern, colour, charge distribution (ζ-potential), particle size, thermal stability, morphology, solubility, foaming and emulsifying properties, and total amino acid content. The findings showed that cross-linking with laccase R significantly improved the protein solubility, emulsion stability and foaming ability of the mixture, whereas these functionalities were lower in the TG-treated mixture due to extensive cross-linking. Furthermore, the mixture treated with laccase T turned brownish in colour and showed a decrease in total amino acid content which could be due to the enzyme's oxidative cross-linking mechanism. Also, the occurrence of cross-linking in the lupin and whey mixture was indicated by changes in other investigated parameters such as particle size, ζ-potential, etc., as compared to the control samples. The obtained results suggested that enzymatic cross-linking, depending on the type of enzyme used, could impact the physicochemical and functional properties of hybrid plant- and animal-based proteins, potentially influencing their applications in food.

Transcriptomics Provide Insights into Early Responses to Sucrose Signaling in Lupinus albus, a Model Plant for Adaptations to Phosphorus and Iron Deficiency.

Phosphorus (P) and iron (Fe) deficiency are major limiting factors for plant productivity worldwide. White lupin (Lupinus albus L.) has become a model plant for understanding plant adaptations to P and Fe deficiency, because of its ability to form cluster roots, bottle-brush-like root structures play an important role in the uptake of P and Fe from soil. However, little is known about the signaling pathways involved in sensing and responding to P and Fe deficiency. Sucrose, sent in increased concentrations from the shoot to the root, has been identified as a long-distance signal of both P and Fe deficiency. To unravel the responses to sucrose as a signal, we performed Oxford Nanopore cDNA sequencing of white lupin roots treated with sucrose for 10, 15, or 20 min compared to untreated controls. We identified a set of 17 genes, including 2 bHLH transcription factors, that were up-regulated at all three time points of sucrose treatment. GO (gene ontology) analysis revealed enrichment of auxin and gibberellin responses as early as 10 min after sucrose addition, as well as the emerging of ethylene responses at 20 min of sucrose treatment, indicating a sequential involvement of these hormones in plant responses to sucrose.

Incorporation of germinated lupin into corn-based extrudates: Focus on starch digestibility, matrix structure and physicochemical properties.

The research aimed to assess the effects of incorporating germinated Lupinus angustifolius flour into corn extrudates for different periods (3, 5, and 7 days), focusing on starch digestibility, morphological structure, thermal, and pasting properties. Extrudate with germinated lupinus flour for 7 days (EG7) significantly increased the content of slowly digestible starch up to 10.56% (p < 0.05). Crystallinity increased up to 20% in extrudates with germinated flour compared to extrudates with ungerminated flour (EUG), observing changes at the molecular level by FTIR that impact the thermal and pasting properties. X-ray diffraction revealed angles of 2θ = 11.31, 16.60, 19.91, and 33.04 as a result of the germination and extrusion processes. Microstructural analysis indicated starch-protein interactions influencing changes in calorimetry, viscosity, X-ray diffraction, and digestibility. PCA allowed establishing that the addition of germinated flours significantly affected the properties and microstructural characteristics of extruded products, potentially affecting digestibility and nutritional quality.

Deflamin Attenuated Lung Tissue Damage in an Ozone-Induced COPD Murine Model by Regulating MMP-9 Catalytic Activity.

Chronic obstructive pulmonary disease (COPD) is comprised of histopathological alterations such as pulmonary emphysema and peribronchial fibrosis. Matrix metalloproteinase 9 (MMP-9) is one of the key enzymes involved in both types of tissue remodeling during the development of lung damage. In recent studies, it was demonstrated that deflamin, a protein component extracted from Lupinus albus, markedly inhibits the catalytic activity of MMP-9 in experimental models of colon adenocarcinoma and ulcerative colitis. Therefore, in the present study, we investigated for the first time the biological effect of deflamin in a murine COPD model induced by chronic exposure to ozone. Ozone exposure was carried out in C57BL/6 mice twice a week for six weeks for 3 h each time, and the treated group was orally administered deflamin (20 mg/kg body weight) after each ozone exposure. The histological results showed that deflamin attenuated pulmonary emphysema and peribronchial fibrosis, as evidenced by H&E and Masson's trichrome staining. Furthermore, deflamin administration significantly decreased MMP-9 activity, as assessed by fluorogenic substrate assay and gelatin zymography. Interestingly, bioinformatic analysis reveals a plausible interaction between deflamin and MMP-9. Collectively, our findings demonstrate the therapeutic potential of deflamin in a COPD murine model, and suggest that the attenuation of the development of lung tissue damage occurs by deflamin-regulated MMP-9 catalytic activity.

The white lupin trehalase gene LaTRE1 regulates cluster root formation and function under phosphorus deficiency.

Under phosphorus (P) deficiency, white lupin (Lupinus albus L.) forms specialized root structure, called cluster root (CR), to improve soil exploration and nutrient acquisition. Sugar signaling is thought to play a vital role in the development of CR. Trehalose and its associated metabolites are the essential sugar signal molecules that link growth and development to carbon metabolism in plants, however, their roles in the control of CR are still unclear. Here, we investigated the function of the trehalose metabolism pathway by pharmacological and genetic manipulation of the activity of trehalase in white lupin, the only enzyme that degrades trehalose into glucose. Under P deficiency, validamycin A treatment, which inhibits trehalase, led to the accumulation of trehalose and promoted the formation of CR with enhanced organic acid production, whereas overexpression of the white lupin TREHALASE1 (LaTRE1) led to decreased trehalose levels, lateral rootlet density, and organic acid production. Transcriptomic and virus-induced gene silencing (VIGS) results revealed that LaTRE1 negatively regulates the formation of CRs, at least partially, by the suppression of LaLBD16, whose putative ortholog in Arabidopsis (Arabidopsis thaliana) acts downstream of ARF7- and ARF19-dependent auxin signaling in lateral root formation. Overall, our findings provide an association between the trehalose metabolism gene LaTRE1 and CR formation and function with respect to organic acid production in white lupin under P deficiency.

Screening of Diverse Lupinus spp. Highlights New Resistances to Sclerotinia sclerotiorum.

Stem rot caused by Sclerotinia sclerotiorum is a serious and sometimes devastating disease of lupin (Lupinus spp.). A total of 236 lupin accessions from across 12 Lupinus species were screened against the prevalent S. sclerotiorum isolate MBRS-1 (pathotype 76). L. angustifolius accession 21655 and L. albus var. albus accession 20589 showed immune and "near-immune" responses, respectively. Thirteen accessions of L. angustifolius, three accessions each of L. albus and L. albus var. albus, and a single accession each of L. albus var. graecus, L. mutabilis, L. palaestinus, and L. pilosus (totaling ∼4%) showed a highly resistant (HR) response. A further 19 accessions of L. angustifolius, 2 accessions each of L. albus and L. pilosus, and a single accession of L. mutabilis (totaling ∼10%) showed a resistant (R) response. The reactions of 16 (15 L. angustifolius, 1 L. digitatus) of these 236 accessions were also compared with their reactions to a different isolate, Walkaway-3 (WW-3; pathotype 10). Against this isolate, five L. angustifolius accessions showed an HR response and four showed an R response, and the L. digitatus accession showed a moderate resistance response. Overall, isolate WW-3 caused significantly (P < 0.05) smaller lesions than MBRS-1 across tested accessions in common. In addition, 328 plants in a "wild" naturalized field population of L. cosentinii were screened in situ in the field against isolate MBRS-1. Five (∼1.5%) of the 328 plants of wild lupin showed an immune response, 63 (∼19%) showed an HR response, and 146 (∼45%) showed an R response. We believe this is the first examination of diverse Lupinus spp. germplasm responses to a prevalent pathotype of S. sclerotiorum. Lupin genotypes exhibiting high-level resistance to Sclerotinia stem rot identified in this study can be used as parental lines for crosses in lupin breeding programs and/or directly as improved cultivars to reduce the adverse impact of this disease on lupin crops.

Drivers of the In-Mouth Interaction between Lupin Protein Isolate and Selected Aroma Compounds: A Proton Transfer Reaction-Mass Spectrometry and Dynamic Time Intensity Analysis.

Plant proteins often carry off-notes, necessitating customized aroma addition. In vitro studies revealed protein-aroma binding, limiting release during consumption. This study employs in vivo nose space proton transfer reaction-time-of-flight-mass spectrometry and dynamic sensory evaluation (time intensity) to explore in-mouth interactions. In a lupin protein-based aqueous system, a sensory evaluation of a trained "green" attribute was conducted simultaneously with aroma release of hexanal, nonanal, and 2-nonanone during consumption. Results demonstrated that enlarging aldehyde chains and relocating the keto group reduced maximum perceived intensity (Imax_R) by 71.92 and 72.25%. Protein addition decreased Imax_R by 30.91, 36.84, and 72.41%, indicating protein-aroma interactions. Sensory findings revealed a perceived intensity that was lower upon protein addition. Aroma lingering correlated with aroma compounds' volatility and hydrophobicity, with nonanal exhibiting the longest persistence. In vitro mucin addition increased aroma binding four to 12-fold. Combining PTR-ToF-MS and time intensity elucidated crucial food behavior, i.e., protein-aroma interactions, that are pivotal for food design.

Biochemical Characterization of the Seed Quality of a Collection of White Lupin Landraces from Southern Italy.

Lupin species provide essential nutrients and bioactive compounds. Within pulses, they have one of the highest contents of proteins and fibers and are among the poorest in carbohydrates. The Mediterranean region is an important cradle area of the origin and domestication of cultivated white lupin (Lupinus albus L.). In this work, we present the characterization of 19 white lupin landraces collected from several sites in southern Italy, characterized by different pedoclimatic conditions. The protein contents and electrophoretic patterns, total polyphenols, phytic acid, lipids and phosphorous content, and reducing and anti-tryptic activities have been determined for each landrace. The relationships of the compositional characteristics, the area of origin of landraces and between compositional characteristics and thermo-pluviometric trends that occurred in the genotype comparison field during the two-year period between 2019 and 2020 are compared and discussed. From a nutritional point of view, some of the analyzed landraces differ from the commercial reference. The panel of molecular analyses performed can help in building an identity card for the grain to rapidly identify those varieties with the desired characteristics.

Comparative Study of the Nutritional, Phytochemical, Sensory Characteristics and Glycemic Response of Cookies Enriched with Lupin Sprout Flour and Lupin Green Sprout.

This study aimed to compare the nutritional, phytochemical, and sensory characteristics of wheat flour (WF) cookies enriched with different proportions of lupin sprout flour (LSF) and those with different proportions of lupin green sprout (LGS). To achieve this, a control cookie (CC); three cookies with 10%, 20%, and 30% of LSF, respectively, CLSF1, CLSF2, and CLSF3; and three other cookies (CLGS1, CLGS2, and CLGS3) with 10%, 20%, and 30%, respectively, were produced. The proximate composition of each cookie was analyzed using AOAC methods. Also, the measurements of the total polyphenol content, antioxidant activity, individual polyphenols, glycemic index, and a sensory analysis were carried out using recent and accurate methods. The contribution of the main nutrients from 100 g of product to the required daily dose was also calculated. Data analysis revealed that cookies with LSF were richer than cookies with LGS in protein, fat, and energy values. CLGS3 was 35.12%, 1.45%, and 5.0% lower in protein, fat, and energy content than CLSF3, respectively. On the other hand, CLSF3 was lower than CLGS3, with 48.2% and 12.4% in moisture and mineral substances, respectively. Both cookies were lower in carbohydrates than the CC (65.20 g/100 g). Still on the subject of micro- and macronutrients, cookies with LSF were richer than those with LGS in all the minerals analyzed. The study also revealed improvements in phytochemical properties, such as total and individual polyphenols and antioxidant activity with the percentage of lupin sprout flour addition. The sensory analysis revealed that, for LSF and LGS cookies, the 10% samples were the most appreciated by consumers, irrespective of the sensory attributes studied. The glycemic index of the CLSF2 product was lower compared to the CC. This study shows that the LSF cookies have better nutritional, phytochemical, and sensory values than the LGS cookies. LSF is, therefore, better suited than LGS to the enrichment of bakery products in general and cookies in particular. The paper provides significant information to estimate the contribution of the consumption of functional products based on lupin sprouts to the required daily dose of food nutrients and the impact on the glycemic index of fortified products.

Influence of Roasting Temperature on the Detectability of Potentially Allergenic Lupin by SDS-PAGE, ELISAs, LC-MS/MS, and Real-Time PCR.

Seeds of "sweet lupins" have been playing an increasing role in the food industry. Lupin proteins may be used for producing a variety of foods, including pasta, bread, cookies, dairy products, and coffee substitutes. In a small percentage of the population, lupin consumption may elicit allergic reactions, either due to primary sensitization to lupin or due to cross-allergy with other legumes. Thus, lupin has to be declared on commercial food products according to EU food regulations. In this study, we investigated the influence of roasting seeds of the L. angustifolius cultivar "Boregine" on the detectability of lupin by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), ELISAs, LC-MS/MS, and real-time PCR. Seeds were roasted by fluidized bed roasting, and samples were drawn at seed surface temperatures ranging from 98 °C to 242 °C. With increasing roasting temperature, the extractability of proteins and DNA decreased. In addition, roasting resulted in lower detectability of lupin proteins by ELISAs and LC-MS/MS and lower detectability of DNA by real-time PCR. Our results suggest reduced allergenicity of roasted lupin seeds used for the production of "lupin coffee"; however, this has to be confirmed in in vivo studies.

Lupin protein-stabilized oil droplets contribute to structuring whey protein emulsion-filled gels.

This work aimed to understand the role of lupin protein or mixed lupin-whey protein stabilized oil droplets on the texture and microstructure of a heat-induced whey protein gel. Protein-stabilized emulsions were compared to surfactant-stabilized emulsions to investigate the potential of their interfacial interactions to impart unique structures in the filled gels. The structure development was followed in situ using rheology and the final heat-induced gels were characterized by small and large amplitude oscillatory rheology and confocal microscopy. The development of the gel modulus as well as the final gel properties were linked to the type of interactions between the whey protein matrix and the protein adsorbed at the oil interface. The final gels were selectively dissolved in various buffers, and the results showed that replacing interfacial whey protein with lupin protein resulted in a reduced amount of disulfide bridges, explaining the softer gel in the lupin containing gels compared to those with whey protein. Non-covalent interactions were the main forces involved in the formation of actively filled droplets in the gel network. This work demonstrated that by modulating the interfacial composition of the oil droplets, differing gel structures could be achieved due to differences in the protein-protein interactions between the continuous and the interfacial phase. There is therefore potential for the development of innovative products using lupin-whey protein mixtures, by careful control of the processing steps and the matrix composition.

Quantitation of Lupinus spp. Quinolizidine Alkaloids by qNMR and Accelerated Debittering with a Resin-Based Protocol.

Quinolizidine alkaloids (QAs) are toxic secondary metabolites of the Lupinus species, the presence of which limits the expansion of lupin beans consumption, despite their high protein content. Evaluation of the level of alkaloids in edible Lupinus species is crucial from a food safety point of view. However, quantitation of QAs is complicated by the fact that not all important alkaloids used for quantitation are commercially available. In this context, we developed a method for the simultaneous quantitation of eight major lupin alkaloids using quantitative NMR spectroscopy (qNMR). Quantitation and analysis were performed in 15 different seed extracts of 11 Lupinus spp. some of which belonged to the same species, with different geographical origins and time of harvest, as well as in all aerial parts of L. pilosus. The mature seeds of L. pilosus were found to be a uniquely rich source of multiflorine. Additionally, we developed a protocol using adsorption or ionic resins for easy, fast, and efficient debittering of the lupine seeds. The protocol was applied to L. albus, leading to a decrease of the time required for alkaloids removal as well as water consumption and to a method for QA isolation from the debittering wastewater.

Performance Evaluation of a Commercial Real-Time PCR Method for the Detection of Lupin Traces in Food.

In accordance with U.S. FDA Foods Program Regulatory Science Steering Committee guidelines, with this study, we optimized and validated a commercial real-time PCR method for the detection of low amounts of lupin in four classes of food matrices: chocolate cookies, ragù, Olivier salad, and barley and rice flour. DNA extracted from blank (true negative) samples artificially contaminated with lupin (Lupinus albus) flour at 1000 ppm underwent dilutions with the DNA extracted from the true negative samples up to 0.5 ppm. The limit of detection for real-time PCR was 0.5 ppm in the complex matrices (range, Ct 26-34), making this a specific, robust, and rapid method for lupin allergen detection and labeling. Our validation data support the suitability of this commercially available real-time PCR method for this purpose.

Effect of Homogenized Callus Tissue on the Rheological and Mechanical Properties of 3D-Printed Food.

The aim of the study was to develop ink enriched with a high content of lupine callus tissue (CT) suitable for 3D printing. Printable ink obtained using mashed potatoes (20 g/100 mL) and a 3% agar solution was used as the parent CT-free ink (CT0). Viscosity increased from 9.6 to 75.4 kPa·s during the cooling of the CT0 ink from 50 to 20 °C, while the viscosity of the ink with 80 g/100 mL of CT (CT80) increased from 0.9 to 5.6 kPa·s under the same conditions. The inclusion of CT was shown to decrease the hardness of 3D-printed food gel from 0.32 ± 0.03 to 0.21 ± 0.03 N. The storage modulus G' value was 7.9 times lower in CT80 samples than in CT0 samples. The values of fracture stress for CT80 and CT0 inks were 1621 ± 711 and 13,241 ± 2329 Pa, respectively. The loss tangent and the limiting strain did not differ in CT0 and CT80, although the value of the fracture strain was 1.6 times higher in the latter. Thus, the present study demonstrates that CT may be added to printing ink in order to enhance food with plant cell material and enable the 3D printing of specially shaped foods.

Variability within L. albus and L. angustifolius Seeds in Dietary Fiber Components.

Lupin seeds have received increased attention due to their applications in the nutrition of humans and livestock. One of their special features is their high content of dietary fiber, which is influenced by the lupin species. No previous studies have focused on the variability in dietary fiber and its fractions within species so far. The aim of this study was to investigate the variability within L. albus and L. angustifolius (eight cultivars each) in the dietary fiber composition expressed as low-molecular-weight soluble dietary fiber (LMWSDF), soluble and insoluble non-cellulosic polysaccharides, cellulose, and Klason lignin. Additionally, we analyzed the proximate composition and the composition of amino acids and fatty acids. The results showed noticeable variability within both species not only in the total dietary fiber but also in all its fractions, especially in LMWSDF, cellulose, non-starch polysaccharides, and Klason lignin within L. angustifolius. This indicates that the cultivar choice should be based on the application for which it is used. Even though important nutrients, such as the most indispensable amino acids, are not highly variable within L. albus, dietary fiber variations can still have a marked influence on the nutritional value because of their influence on the digestibility of other nutrients.

Effect of Lupin Supplementation on the Growth, Carcass, and Meat Characteristics of Late-Fattening Hanwoo Steers.

This study aimed to investigate the effects of lupin flake supplementation on the growth, plasma parameters, carcass characteristics, and meat composition of late-fattening Hanwoo steers. The steers (n = 40) were randomly divided into the four groups with 10 steers each: LP0 (lupin flake 0%), LP3 (lupin flake 3%), LP6 (lupin flake 6%), and LP9 (lupin flake 9%). The total digestible nutriant intake increased as the concentration of lupin increased (linear and quadratic effects; p < 0.05). The thiobarbituric acid-reactive substance content in the strip loins decreased as lupin flake supplementation levels increased (linear and quadratic effects; p < 0.05), while carnosine levels increased linearly (p < 0.05). As the lupin flake supplementation level increased, anserine and creatinine contents increased linearly and quadratically (p < 0.05). Similarly, adenosine triphosphate (ATP) and adenosine monophosphate (AMP) content increased with increasing lupin flake supplementation levels in linear and quadratic effects (p < 0.001). Palmitoleic acid content increased significantly with increasing lupin flake supplementation level (linear and quadratic effects; p < 0.05). The content of oleic acid in the strip loin was not significant, but the unsaturated fatty acid (UFA) (p < 0.05) and n-6/n-3 ratio (p < 0.05) increased. The results of this study indicated that although lupin flake supplementation did not markedly affect the growth, carcass characteristics, or meat composition of late-fattening Hanwoo steers, it exerted a positive effect on the flavor, taste profiles (anserine, creatinine, ATP, and AMP), hypotonicity (TBARS), and healthy meat production (UFA and n-6/n-3 ratio) related to beef.