Clinical outcomes of implants placed with transcrestal maxillary sinus elevation: a systematic review and meta-analysis.

This systematic review and meta-analysis assesses the clinical outcomes of implants inserted during or following transcrestal sinus lifts. The study protocol was prospectively registered on PROSPERO (CRD42024504513). PubMed, Web of Science, Embase, and Scopus databases were searched up to 21 February 2024, and randomised clinical trials utilising transcrestal sinus lifts were included. Qualitative and quantitative syntheses were conducted. A random effects model was used to pool the survival rate of implants placed with transcrestal sinus lifts using hand osteotomes without grafting, along with meta-regression and subgroup analyses. Funnel plots and Egger's linear regression were used to explore possible publication bias. Probabilities of less than 0.05 were considered significant. A total of 1807 records were identified after the initial search. Seventeen studies were included with 10 of them considered for meta-analysis. Studies used hand osteotomes, a combination of piezoelectric and hand osteotomes, drills, and smart lifts for sinus elevation. Only studies that used hand osteotomes reported subsequent vertigo and dizziness in patients. The meta-analysis showed a 100% (95% CI: 99% to 100%) survival rate for both grafted and non-grafted transcrestal sinus lifts using hand osteotomes. Meta-regression showed that follow-up time did not significantly affect the implants' survival. Subgroup analyses showed no significant difference between bone-level and tissue-level implants and one-stage or two-stage implants. On considering the limitations of this study it can be concluded that closed maxillary sinus elevation can be considered a relatively safe technique that is associated with a high survival rate. However, caution should be taken when using hand osteotomes because of a higher rate of sinus lining perforation and reported patient vertigo.

Randomized controlled trial on the efficacy of a custom-made, fully guided implant system for flapless crestal sinus floor elevation: Accuracy and patient-reported outcomes.

OBJECTIVE: To compare fully guided flapless implant surgery using a light-cured surgical guide (FG group) with partially guided open flap surgery (PG group) in the posterior maxilla when performing simultaneous sinus floor elevation in terms of the accuracy, time requirements, and patient/clinician-reported outcomes (PROMs and CROMs). MATERIALS AND METHODS: In this study, 56 tissue-level implants were placed with crestal sinus floor elevation in 56 patients at single-tooth sites, with 28 implants allocated to the PG group and 28 to the FG group. The deviations of the placed implants from the virtually planned positions were measured at the implant platform and apex and for the angular deviation. The presurgical preparation time and the duration of surgery were measured. PROMs and CROMs were made by administering questionnaires at multiple time points. RESULTS: Horizontal deviations at the platform and apex and the angular deviation were significantly smaller in the FG group than the PG group (p < .05). Presurgical preparation and surgery times were significantly shorter in the FG group (p < .001). Patient satisfaction and willingness to receive repeat treatment were significantly better in the FG group than in the PG group (p < .005 and .025, respectively). Clinicians were more satisfied in the FG group than the PG group (p < .05). CONCLUSION: When placing an implant with sinus floor elevation, the flapless approach using a fully guided surgical system can be more accurate, faster, and increase the satisfaction of both the clinician and patient compared to the partially guided surgery.

Dental Pathophysiology of Odontogenic Sinusitis: Endodontic Infections.

Bacterial odontogenic sinusitis (ODS) arises from maxillary dental issues or oral procedures, and affects at least the maxillary sinuses, with or without other paranasal sinus involvement. It has been historically underreported, in contrast to more recent findings attributing 25-40% of chronic maxillary sinusitis to dental causes. Endodontic infections represent one of the most common causes of ODS. Endodontic factors like root canal infection and microbial proximity to sinus cavities play pivotal roles. Host immunological responses further shape disease severity and progression. This article aims to explore the complexity of endodontic infections that cause ODS, elucidating anatomical, microbial, and immunological aspects.

Odontogenic Sinusitis Presenting With Infraorbital Numbness and Progressive Maxillary Sinus Atelectasis.

Odontogenic sinusitis is the most common cause of isolated maxillary sinusitis. Accurate diagnosis is important to ensure optimal treatment. We discuss the unique presentation of a 55-year-old man with odontogenic sinusitis and associated infraorbital nerve neuropathy. We document his later development of chronic maxillary atelectasis and discuss the possible underlying pathophysiology linking this with his infraorbital neuropathy.

[Methods of active drainage of the maxillary sinus]. / Metody aktivnogo drenirovaniya verkhnechelyustnoi pazukhi.

This study is devoted to the analysis of the practical experience of specialists in the field of otorhinolaryngology on the issue of puncture drainage of the maxillary sinus for bacterial sinusitis. The article provides an overview of historically significant and modern methods of active drainage of the maxillary sinus. It has been established that puncture treatment remains an effective method of treating bacterial forms of maxillary sinusitis.

Distribution of the intraosseous branch of the posterior superior alveolar artery relative to the posterior maxillary teeth.

Purpose: Preoperative identification of the intraosseous posterior superior alveolar artery (PSAA) is critical when planning sinus surgery. This study was conducted to determine the distance between the cementoenamel junction and the PSAA, as well as to identify factors influencing the detection of the PSAA on cone-beam computed tomography (CBCT). Materials and Methods: In total, 254 CBCT scans of maxillary sinuses, acquired with 2 different scanners, were examined to identify the PSAA. The distance from the cementoenamel junction (CEJ) to the PSAA was recorded at each maxillary posterior tooth position. Binomial logistic regression and multiple linear regression were employed to evaluate the effects of scanner type, CBCT parameters, sex, and age on PSAA detection and CEJ-PSAA distance, respectively. P-values less than 0.05 were considered to indicate statistical significance. Results: The mean CEJ-PSAA distances at the second molar, first molar, second premolar, and first premolar positions were 17.0±4.0 mm, 21.8±4.1 mm, 19.5±4.7 mm, and 19.9±4.9 mm for scanner 1, respectively, and 17.3±3.5 mm, 16.9±4.3 mm, 18.5±4.1 mm, and 18.4±4.3 mm for scanner 2. No independent variable significantly influenced PSAA detection. However, tooth position (b=-0.67, P<0.05) and scanner type (b=-1.3, P<0.05) were significant predictors of CEJ-PSAA distance. Conclusion: CBCT-based estimates of CEJ-PSAA distance were comparable to those obtained in previous studies involving cadavers, CT, and CBCT. The type of CBCT scanner may slightly influence this measurement. No independent variable significantly impacted PSAA detection.

Three-dimensional morphometric and volumetric analysis of maxillary sinuses.

BACKGROUND: The maxillary sinus is a pyramid-shaped cavity with varying shapes, sizes, and capacities. Its dimensions grow gradually and develop until early adulthood. Anatomical knowledge of the maxillary sinus is essential to understanding sinonasal disorders, planning surgical procedures and preventing complications. Awareness of the sinus's proximity to critical structures helps avoid injuries during surgery. The European, Korean, and Sri Lankan population study parameters show varying results and do not necessarily apply to the Indian population. The standard morphometric data of the maxillary sinus is scanty in the Indian population. The study aimed to determine the volume and morphometry of the maxillary sinus along with gender differences in the Eastern population of the Indian. MATERIALS AND METHODS: A retrospective cross-sectional study was conducted using cone beam computed tomography data of maxillary sinuses of 100 normal individuals. The data were analysed after the three-dimensional reconstruction of digital imaging and communications in medicine (DICOM) images with the help of DICOM to print and Geomagic freeform software in the Anatomy department. The different linear morphometric variables and volume of the maxillary sinus were studied. SPSS version 27.0. was utilised for statistical analyses. RESULTS: The mean values of Antero-posterior diameter, Transverse diameter, Craniocaudal diameters, the height of ostium from the floor and volume of the maxillary sinus in males on the right side are 36.61 mm, 20.7 mm, 40.31 mm, 26.02 mm and 16055.24 mm³ and on the left side are 37.17 mm, 20.17 mm, 40.73 mm, 26.91 mm and 15712.66 mm³ whereas in females the values on the right side are 38.10 mm, 21.56 mm, 38.96 mm, 25.81 mm and 14687.78 mm³ and on left side are 38.23 mm, 21.53 mm, 38.48 mm, 25.28 mm and 14203.13 mm3 respectively. The side-to-side parameter differences were non-significant within the male and female groups, respectively. The females had significantly (p < 0.05) larger transverse diameters than males in both the right and left maxillary sinuses. The males tend to have a slightly larger mean craniocaudal diameter than females, but the difference was found statistically significant (p < 0.05) only in the left maxillary sinus. The gender differentiation based on the measured parameters of bilateral maxillary sinus accuracy rate was 89.4% in males and 61.8% in females. CONCLUSIONS: These parameters serve as a standard or reference point, allowing radiologists and surgeons to compare individual patient scans to population averages and aid in better clinical outcomes. The mean values of different parameters of the maxillary sinus may be utilised to differentiate various suspected sinus pathologies, which is helpful for functional endoscopic sinus surgery. Gender differentiation can be done more accurately by forensic experts using Maxillary sinus transverse diameter bilaterally, followed by craniocaudal diameter of the left side sinus for predicting the gender of an unknown maxilla.

The Endoscopic Removal of a Detached Dental Implant Cap in the Maxillary Sinus During the Waiting Period: A Case Report.

Displacement of dental implants into the maxillary sinus is one of the common dental complications. However, it is rare that dental implants cause the displacement of multiple components due to separation. Here, we describe an unusual case of a 43-year-old man who had a missing implant in the maxillary sinus after an implant procedure. There was a two-week waiting period before we performed the removal during which the cap had unexpectedly separated from the body and freely moved into the ostium by sinus activity. The body was independently extracted intraorally. The remaining cap was secondly removed by utilizing nasal endoscopy. There were no complications in the postoperative period and the patient reported no symptoms of sinusitis after two months of follow-up. We experience unexpected events in the course of treating a displaced implant into the maxillary sinus. Our case report may provide several learning points for the removal of a missing implant.

Can human sex be estimated based on the dimensions of the maxillary sinuses? A systematic review of the literature on cone-beam and multi-slice computed tomography.

PURPOSE: To critically appraise and summarize the potential of linear and/or volumetric dimensions of the maxillary sinuses obtained with cone-beam and multi-slice computed tomography. METHODS: A bibliographic search was conducted in seven databases in August 2023. Cross-sectional retrospective studies using linear and volumetric measurements of the maxillary sinuses obtained with cone-beam and multi-slice computed tomography for sex estimation and presenting numerical estimation data were included. Narrative or systematic reviews, letters to the editor, case reports, laboratory studies in animals, and experimental studies were excluded. The critical appraisal and certainty of evidence were assessed using the guidelines described by Fowkes and Fulton and GRADE, respectively. RESULTS: A total of 656 studies were found, 32 of which were included. A total of 3631 individuals were analyzed and the overall sex estimation rate ranged from 54.9 % to 95 %. When compared with isolated measurements, combined linear measurements of the right and left maxillary sinuses, such as width, length, and height, provided a higher rate of sex estimation (54.9-95 %). In most of the studies (62.5 %), all measurements were higher in men than in women. Multiple methodological problems were found in the studies, especially distorting influences in 84.4 % of the answers. The certainty of evidence varied from very low to low. CONCLUSIONS: The combination of height, width, and length measurements of the right and left maxillary sinuses from cone-beam and multi-slice computed tomography can be useful in the estimation of sex of humans. Further primary studies are needed to increase the certainty of evidence. PROSPERO REGISTER: CRD42020161922.

Sinus Savvy: Exploring the Current Techniques of Maxillary Sinus Augmentation.

Sinus ridge augmentation is a surgical procedure aimed at increasing the volume of bone in the posterior maxilla to permit successful dental implant placement. The current review article presents an overview of various techniques used for sinus ridge augmentation, including the lateral window technique, crestal approach, transalveolar technique, and piezoelectric osteotomy. The article examines the advantages and limitations of each technique, such as invasiveness, surgical difficulty, and the requirement for additional procedures. Additionally, the article discusses the factors that influence the success of the procedure, including patient age, residual bone height, and the kind of bone graft substance used. The review also emphasizes the importance of proper case selection, surgical planning, and postoperative care to ensure optimal outcomes. Overall, the article provides valuable insights into the current techniques used for sinus ridge augmentation, highlighting the need for further research to improve patient outcomes and the success of placing dental implants over the long run.

Sinus membrane thickness of healthy endodontically treated maxillary molars.

OBJECTIVE: The study aimed to investigate the sinus membrane thickness (SMT) adjacent to healthy endodontically-treated maxillary molars with or without protruded apical foramen into the sinus cavity using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Images of 207 non-smoker patients aged 18-40 were retrospectively analyzed, 140 were endodontically treated, and 136 were without endodontic treatment. Patients with any sinus pathology, teeth that have symptoms, or poor root filling were excluded. Study groups consisted of Group EM-I (endodontically treated and protruded apical foramen), Group EM-C (endodontically treated and contacted apical foramen), and similarly without endodontic treatment; Group M-I and Group M-C. SMT upon the mesial, distal, and palatal roots was measured. One-way ANOVA and Student's t-tests were performed. RESULTS: Group EM-I had the thickest sinus membrane compared to other groups (p = 0.013). SMT values were 2.37-2.60 mm in Group EM-I, and 1.34-1.58 mm in other groups. Thickening (> 2 mm) percentages were 33.45% in Group EM-I and between 4.25 and 8.25% in other groups. No statistical difference was detected between first and second molars and genders (p > 0.05). CONCLUSION: When the apical foramen protruded into the sinus cavity, the conventional root canal treatment caused a minimal (between 2.37 mm and 2.60 mm) sinus membrane thickening with a rate of 33.45% based upon CBCT examinations.

Deep learning in the diagnosis of maxillary sinus diseases: A systematic review.

OBJECTIVES: To assess the performance of deep learning (DL) in the detection, classification, and segmentation of maxillary sinus diseases. MATERIALS AND METHODS: An electronic search was conducted by two reviewers on databases including PubMed, Scopus, Cochrane, and IEEE. All English papers published no later than February 7, 2024, were evaluated. Studies related to DL for diagnosing maxillary sinus diseases were also searched in journals manually. RESULTS: 14 of 1167 studies were eligible according to the inclusion criteria. All studies trained DL models based on radiographic images. Six studies applied to detection tasks, one focused on classification, two segmented lesions, and five studies made a combination of 2 types of DL models. The accuracy of the DL algorithms ranged from 75.7% to 99.7%, and the area under curves (AUC) varied between 0.7 and 0.997. CONCLUSION: DL can accurately deal with the tasks of diagnosing maxillary sinus diseases. Students, residents, and dentists could be assisted by DL algorithms to diagnose and make rational decisions on implant treatment related to maxillary sinuses.

Histomorphometric and microtomographic analysis of maxillary sinus augmentation surgeries with and without collagen membrane on the lateral window: A randomized clinical trial.

OBJECTIVE: To evaluate the histomorphometric and computerized microtomographic (Micro-CT) analysis of the regenerated bone tissue from maxillary sinus augmentation surgery, with and without using the collagen membrane on the external osteotomy window. MATERIALS AND METHODS: Twelve patients were selected for this prospective, controlled, and randomized study. The patients were submitted to bilateral maxillary sinus surgery in a split-mouth design. On the test side, the maxillary sinus augmentation procedure included using Geistlich Bio-Oss® and a Geistlich Bio-Gide® collagen membrane covering the lateral osteotomy window. On the control side, only Geistlich Bio-Oss® was used without the presence of the membrane. After 6 months, the surgeries for implant installation were performed. In this surgical phase, specimens of the regenerated tissue were collected for histological and Micro-CT analysis. RESULTS: In the histomorphometric evaluation, the mean (±SD) percentages of newly formed bone were 43.9% (±11.5) and 40.8% (±8.9) in the test and control groups, respectively. The corresponding values of the Micro-CT analysis were 36.6% (±3.4) and 37.2% (±4.7) in the test and control groups, respectively. There was no statistically significant difference between the test and control groups in the two methods. In addition, there was no statistically significant difference between the mean percentage of biomaterial remaining between the test and control groups. However, the mean percentage of newly formed bone was significantly higher and the mean percentage of remaining biomaterial was significantly lower in the histomorphometric analysis compared to the values obtained through microtomography. CONCLUSION: The additional use of collagen membranes in maxillary sinus surgery does not offer advantages in newly formed bone.

Prediction of the bone volume for sinus augmentation through 3-dimensional analysis.

Background/purpose: No consensus has been established regarding the exact amount of bone grafting in maxillary sinus augmentation. The aim of this study was to estimate the minimum bone volume for sinus augmentation and to investigate the factors that influence the augmentation volume (AV). Materials and methods: This study included patients with cone-beam computed tomography scanning. Dome-shaped sinus augmentation was performed virtually at vertical heights (VH) of 3, 5, 7, and 9 mm in Group A (without implantation) and Group B (with implantation). The augmentation angle (AA) and the sinus width (SW) were measured. The AV was measured using the three-dimensional image processing program 3D Slicer. Univariable and multivariable analyses were conducted. Results: This study included 30 patients (120 subjects). In Group A, the mean AVs were 0.062, 0.271, 0.642, and 1.287 cc at VHs of 3, 5, 7, and 9 mm, respectively, in Group B, the mean AVs were 0.037, 0.230, 0.594, and 1.230 cc. Univariable analysis indicated that factors significantly associated with the AV in both groups included SW, AA, and VH (P < 0.001). Multivariable analysis indicated that factors significantly associated with the AV in both groups included AA and VH (P < 0.01). Conclusion: Clinicians can predict the bone volume for sinus augmentation by measuring the augmentation height and angle.

Automatic segmentation of the maxillary sinus on cone beam computed tomographic images with U-Net deep learning model.

BACKGROUND: Medical imaging segmentation is the use of image processing techniques to expand specific structures or areas in medical images. This technique is used to separate and display different textures or shapes in an image. The aim of this study is to develop a deep learning-based method to perform maxillary sinus segmentation using cone beam computed tomography (CBCT) images. The proposed segmentation method aims to provide better image guidance to surgeons and specialists by determining the boundaries of the maxillary sinus cavities. In this way, more accurate diagnoses can be made and surgical interventions can be performed more successfully. METHODS: In the study, axial CBCT images of 100 patients (200 maxillary sinuses) were used. These images were marked to identify the maxillary sinus walls. The marked regions are masked for use in the maxillary sinus segmentation model. U-Net, one of the deep learning methods, was used for segmentation. The training process was carried out for 10 epochs and 100 iterations per epoch. The epoch and iteration numbers in which the model showed maximum success were determined using the early stopping method. RESULTS: After the segmentation operations performed with the U-Net model trained using CBCT images, both visual and numerical results were obtained. In order to measure the performance of the U-Net model, IoU (Intersection over Union) and F1 Score metrics were used. As a result of the tests of the model, the IoU value was found to be 0.9275 and the F1 Score value was 0.9784. CONCLUSION: The U-Net model has shown high success in maxillary sinus segmentation. In this way, fast and highly accurate evaluations are possible, saving time by reducing the workload of clinicians and eliminating subjective errors.

Bovine-originated xenografts versus synthetic bone grafting materials in lateral maxillary sinus floor augmentation: A systematic review and meta-analysis.

AIMS: This study aimed to systematically compare the patients undergoing lateral MSFA therapies utilizing bovine-originated xenografts versus varied synthetic bone grafting materials. METHODS: Pubmed, Scopus, Embase, and Cochrane Library were searched up to April 2023, compensated by a manual search in selected journals. Studies reporting histological outcomes (residual bone graft, newly formed bone, non-mineralized tissue) and clinical outcomes (implant survival, ISQ value) were included. Several analyses were performed, including meta-analysis, sensitivity study, and Egger's regression tests. RESULTS: Sixteen clinical/randomized control trials were included in this systematic review, among which 12 were enrolled in a meta-analysis. The percentage of newly formed bone within the grafted sinuses by hybrid HA/TCP was significantly higher than those by xenografts (WMD 2.85, 95%CI [0.72; 4.99]), but those grafted by pure HA (WMD -1.72, 95%CI [-3.15; -0.29]) or TCP (WMD -7.10, 95%CI [-13.02; -1.17]) were significantly lower than xenograft counterparts. The residual bone graft and non-mineralized tissue yielded by synthetic HA, TCP, and HA/TCP showed no significant differences with the xenograft group. CONCLUSION: The chemistry of grafted bone substitutes in lateral MSFA influenced the quantity of newly formed bone. Those grafted with hybrid HA/TCP yielded the highest amount of new bone compared to bovine-originated HA. However, this influence was not significant on residual bone graft and non-mineralized tissue.

Role of elective neck dissection in cT2N0 maxillary sinus squamous cell carcinoma.

Our objective was to examine the impact of elective neck dissection (END) on the prognosis of patients with cT2N0 maxillary sinus squamous cell carcinoma (MS-SCC) and to determine factors that predict the occurrence of occult metastasis in this patient population. A retrospective analysis was conducted using data from the SEER database. Patients with cT2N0 MS-SCC were included in the study and divided into two groups: those who received END and those who did not. The impact of END on disease-specific survival (DSS) and overall survival (OS) was assessed using propensity score matching. Multivariate logistic regression analysis was performed to determine predictors for occult metastasis. A total of 180 patients were included in the study, with 40 cases receiving END. Following propensity score matching, patients treated with END and those without showed similar DSS and OS rates. Occult metastasis was observed in 9 patients, corresponding to a rate of 22.5%. High-grade tumors were independently associated with a higher risk of occult metastasis compared to low-grade tumors (hazard ratio 1.52, 95% confidence interval 1.17-2.00). cT2 MS-SCC carries an occult metastasis rate of 22.5%, with histologic grade being the primary determinant of occult metastasis. END does not confer a significant survival benefit in this patient population.

Influence of Schneiderian Membrane Perforation on Implant Survival Rate: Systematic Review and Meta-Analysis.

Background: Maxillary sinus lift is a well-documented and accepted technique in the rehabilitation of the posterior maxilla. Schneiderian membrane perforation is the most common complication and may occur in between 7% and 56% of cases. Different materials and techniques have been described to achieve reparation of the perforation. The aim of this study was to establish whether the perforation of the Schneiderian membrane and its repair during maxillary sinus lift surgery results in a lower implant survival rate compared to those cases where the membrane has not been perforated. Materials and methods: A systematic review and meta-analysis of studies assessing the survival rate of implants placed in regenerated sinus using the lateral window approach, where the perforation of the Schneiderian membrane occur, was carried out. Statistical analysis was performed with Open Meta-Analyst, calculating the odds ratio of implants placed in perforated sinuses and non-perforated sinuses. Results: Ten articles were included in the qualitative analysis and seven articles in the quantitative analysis or meta-analysis. A total of 1224 maxillary sinus augmentation surgeries were performed without perforation of the Schneiderian membrane and 2725 implants were placed; 62 implants failed during the follow-up period with an overall survival rate of 97.7%. In 480 perforated sinuses, 1044 implants were placed, of which 30 failed; the overall survival rate was 97.1%. There were no significant differences between the implant survival rate of the implants in the two groups (OR = 0.78; CI = 0.49-2.23; p = 0.28 and I2 heterogeneity: 0%, p = 0.44). Conclusions: Schneiderian membrane perforation, as long as it is repaired, does not appear to negatively influence implant survival rate. Membrane perforation should not be considered a reason to abort the procedure or an absolute contraindication to implant placement.

Retrospective analysis of pathological changes in the maxillary sinus with CBCT.

The aim of this study is to examine the frequency of maxillary sinus pathologies and their relationship with each other using cone beam computed tomography (CBCT) and to make a new grade according to the number of affected walls. 1000 maxillary sinuses of 500 patients with CBCT images were included in the study. Anatomical variations and pathological formations of the maxillary sinuses were examined. Images were evaluated for the presence of flat, polypoidal, partial and generalized mucosal thickening, partial and total opacification, polyps and mucous retention cysts. Maxillary sinus pathologies were graded according to the number of walls affected. In the examined CBCT images, no pathology was found in 54.2% of the maxillary sinuses, while pathology was observed in 45.8%. The most common sinus pathologies were mucous retention cyst (12.3%) and polypoidal thickening (12.2%). While pneumatization, ostium obstruction, and the presence of sinus-related roots were associated with sinus pathology, no relationship was found with nasal septum deviation and the presence of septa. Before dental implant and sinus surgery applications, the presence of sinus pathologies and their relationship with anatomical variations can be evaluated with CBCT, a three-dimensional technique, and complications such as sinus membrane perforation, infection, failure to break the bone window due to the presence of antral septa, graft loss and oroantral fistula formation can be reduced.

Sinus Evaluation for Odontogenic Sinusitis.

This article summarizes how to diagnose common and nuanced cases of odontogenic sinusitis (ODS) through a collaborative approach between otolaryngologists and dental specialists, with a heightened focus on the role of otolaryngologists in the diagnostic process. A critical part of the diagnostic framework is that otolaryngologists must confirm the infectious sinusitis but also suspect ODS to ensure he or she refers the patient to a dental specialist to confirm or refute ipsilateral infectious maxillary dental pathology. To confirm the purulent sinusitis of ODS, nasal endoscopy is most critical. Computed tomography imaging is an important part of the workup.