ABSTRACT
Potassium ion batteries (PIBs) are a viable alternative to lithium-ion batteries for energy storage. Red phosphorus (RP) has attracted a great deal of interest as an anode for PIBs owing to its cheapness, ideal electrode potential, and high theoretical specific capacity. However, the direct preparation of phosphorus-carbon composites usually results in exposure of the RP to the exterior of the carbon layer, which can lead to the deactivation of the active material and the production of "dead phosphorus". Here, the advantage of the π-π bond conjugated structure and high catalytic activity of metal phthalocyanine (MPc) is used to prepare MPc@RP/C composites as a highly stable anode for PIBs. It is shown that the introduction of MPc greatly improves the uneven distribution of the carbon layer on RP, and thus improves the initial Coulombic efficiency (ICE) of PIBs (the ICE of FePc@RP/C is 75.5% relative to 62.9% of RP/C). The addition of MPc promotes the growth of solid electrolyte interphase with high mechanical strength, improving the cycle stability of PIBs (the discharge-specific capacity of FePc@RP/C is 411.9 mAh g-1 after 100 cycles at 0.05 A g-1). Besides, density functional theory theoretical calculations show that MPc exhibits homogeneous adsorption energies for multiple potassiation products, thereby improving the electrochemical reactivity of RP. The use of organic molecules with high electrocatalytic activity provides a universal approach for designing superior high-capacity, large-volume expansion anodes for PIBs.
ABSTRACT
Conventional electrochemical sensors use voltammetric and amperometric methods with external power supply and modulation systems, which hinder the flexibility and application of the sensors. To avoid the use of an external power system and to minimize the number of electrochemical cell components, a self-powered electrochemical sensor (SPES) for hydrogen peroxide was investigated here. Iron phthalocyanine, an enzyme mimetic material, and Ni were used as a cathode catalyst and an anode material, respectively. The properties of the iron phthalocyanine catalyst modified by graphene nanoplatelets (GNPs) were investigated. Open circuit potential tests demonstrated the feasibility of this system. The GNP-modulated interface helped to solve the problems of aggregation and poor conductivity of iron phthalocyanine and allowed for the achievement of the best analytical characteristics of the self-powered H2O2 sensor with a low detection limit of 0.6 µM and significantly higher sensitivity of 0.198 A/(M·cm2) due to the enhanced electrochemical properties. The SPES demonstrated the best performance at pH 3.0 compared to pH 7.4 and 12.0. The sensor characteristics under the control of external variable load resistances are discussed and the cell showed the highest power density of 65.9 µW/cm2 with a 20 kOhm resistor. The practical applicability of this method was verified by the determination of H2O2 in blood serum.
Subject(s)
Biosensing Techniques , Electrochemical Techniques , Electrodes , Graphite , Hydrogen Peroxide , Graphite/chemistry , Catalysis , Indoles/chemistry , Limit of Detection , Ferrous Compounds/chemistry , Platinum/chemistry , Nickel/chemistryABSTRACT
Li2CO3 is the most tenacious parasitic solid-state product in lithium-air batteries (LABs). Developing suitable redox mediators (RMs) is an efficient way to address the Li2CO3 issue, but only a few RMs have been investigated to date, and their mechanism of action also remains elusive. Herein, we investigate the effects of the central metal ion in binuclear metal phthalocyanines on the catalysis of Li2CO3 decomposition, namely binuclear cobalt phthalocyanine (bi-CoPc) and binuclear cobalt manganese phthalocyanine (bi-CoMnPc). Density functional theory (DFT) calculations indicate that the key intermediate peroxydicarbonate (*C2O62-) is stabilized by bi-CoPc2+ and bi-CoMnPc3+, which is accountable for their excellent catalytic effects. With one central metal ion substituted by manganese for cobalt, the bi-CoMnPc's second active redox couple shifts from the second Co(II)/Co(III) couple in the central metal ion to the Pc(-2)/Pc(-1) couple in the phthalocyanine ring. In artificial dry air (N2-O2, 78:22, v/v), the LAB cell with bi-CoMnPc in electrolyte exhibited 261 cycles under a fixed capacity of 500 mAh g-1carbon and current density of 100 mA g-1carbon, significantly better than the RM-free cell (62 cycles) and the cell with bi-CoPc (193 cycles).
ABSTRACT
Elevated levels of reactive oxygen species (ROS) have demonstrated efficacy in eliminating tumor cells by modifying the tumor microenvironment and inducing the polarization of tumor-associated macrophages (TAMs). Nevertheless, the transient nature and limited diffusion distance inherent in ROS present significant challenges in cancer treatment. In response to these limitations, we have developed a nanoparticle (MnClPc-HSA@GOx) that not only inhibits tumor energy metabolism but also facilitates the transition of TAMs from the M2 type (anti-inflammatory type) to the M1 type (proinflammatory type). MnClPc-HSA@GOx comprises a manganese phthalocyanine complex (MnClPc) enveloped in human serum albumin (HSA), with glucose oxidase (GOx) loaded onto MnClPc@HSA nanoparticles. GOx was employed to catalyze the decomposition of glucose to produce H2O2 and gluconic acid. Additionally, in the presence of MnClPc, it catalyzes the conversion of H2O2 into â¢O2- and 1O2. Results indicate that the nanoparticle effectively impedes the glucose supply to tumor cells and suppresses their energy metabolism. Simultaneously, the ROS-mediated polarization of TAMs induces a shift from M2 to M1 macrophages, resulting in a potent inhibitory effect on tumors. This dual-action strategy holds promising clinical inhibition applications in the treatment of cancer.
Subject(s)
Isoindoles , Nanoparticles , Neoplasms , Humans , Manganese/pharmacology , Glucose Oxidase/metabolism , Reactive Oxygen Species/metabolism , Hydrogen Peroxide/metabolism , Neoplasms/metabolism , Macrophages , Oxygen/metabolism , Energy Metabolism , Glucose , Tumor MicroenvironmentABSTRACT
Heterogenizing the molecular catalysts on conductive scaffolds to achieve the isolated molecular dispersion and expected coordination structures is significant yet still challenging. Herein, a sulfur-driving strategy to anchor monodispersed cobalt phthalocyanine on nitrogen and sulfur co-doped graphene (NSG-CoPc) is demonstrated. Experimental and theoretical analysis prove that the incorporation of S dramatically improves the adsorption capability of NSG and evokes the monodispersion of the CoPc molecule, promoting the axial CoâN coordination and the electron delocalization of the Co catalytic center. Benefiting from the reduced activation energy barrier and boosted electron transfer, as well as the maximized active site utilization, NSG-CoPc exhibits outstanding H2O2 oxidization and sensing performance (used as a representative reaction). Moreover, the usage of NSG as a substrate can be readily extended to other metal (Ni, Cu, and Fe) phthalocyanine molecules with molecular-level dispersion. This work clarifies the mechanism of heteroatoms decoration and provides a new paradigm in devising monodispersed molecular catalysts with modulated chemical surroundings for broad applications.
ABSTRACT
A sulfonyl-chloride-modified lignin-based porous carbon-supported metal phthalocyanine catalyst was prepared and used to replace the traditional Fenton's reagent for lignin degradation. The catalyst underwent a detailed characterization analysis in terms of functional group distributions, surface area, morphological structure, via FT-IR, XPS, BET, and SEM. The catalyst possessed a specific surface area of 638.98 m2/g and a pore volume of 0.291 cm3/g. The prepared catalyst was studied for its ability of oxidative degradation of lignin under different reaction conditions. By optimizing the reaction conditions, a maximum liquid product yield of 38.94% was obtained at 135 °C with 3.5 wt% of catalyst and 15 × 10-2 mol/L H2O2; at the same time, a maximum phenols selectivity of 32.58% was achieved. The compositions and properties of liquid products obtained from lignin degradation using different catalyst concentrations were studied comparatively via GC-MS, FT-IR, 1H-NMR, and EA. Furthermore, the structure changes of solid residues are also discussed.