From imaging to personalized 3D printed molds in cranioplasty.

Cranioplasty is the surgical repair of a bone defect in the skull resulting from a previous operation or injury, which involves lifting the scalp and restoring the contour of the skull with a graft made from material that is reconstructed from scans of the patient's own skull. The paper introduces a 3D printing technology in creating molds, which are filled with polymethyl methacrylate (PMMA) to reconstruct the missing bone part of the skull. The procedure included several steps to create a 3D model in an STL format, conversion into a G-code which is further used to produce the mold itself using a 3D printer. The paper presents our initial experience with 5 patients who undergone cranioplasty utilizing 3D printed molds. Making a patient-specific model is a very complex process and consists of several steps. The creation of a patient-specific 3D model loading of DICOM images obtained by CT scanning, followed by thresholding-based segmentation and generation of a precise 3D model of part of the patient's skull. Next step is creating the G-code models for 3D printing, after which the actual models are printed using Fused Deposition Modeling printer and PLA material. All surgeries showed good match of the missing bone part and part created using 3D printed mold, without additional steps in refinement. In such a way, 3D printing technology helps in creating personalized and visually appealing bone replacements, at a low cost of the final product.

Evolution and related pathogenic genes of Pseudodiploöspora longispora on Morchella based on genomic characterization and comparative genomic analysis.

True morels (Morchella) are globally renowned medicinal and edible mushrooms. White mold disease caused by fungi is the main disease of Morchella, which has the characteristics of wide incidence and strong destructiveness. The disparities observed in the isolation rates of different pathogens indicate their varying degrees of host adaptability and competitive survival abilities. In order to elucidate its potential mechanism, this study, the pathogen of white mold disease from Dafang county, Guizhou Province was isolated and purified, identified as Pseudodiploöspora longispora by morphological, molecular biological and pathogenicity tests. Furthermore, high-quality genome of P. longisporus (40.846 Mb) was assembled N50 of 3.09 Mb, predicts 7381 protein-coding genes. Phylogenetic analysis of single-copy homologous genes showed that P. longispora and Zelopaecilomyces penicillatus have the closest evolutionary relationship, diverging into two branches approximately 50 (44.3-61.4) MYA. Additionally, compared with the other two pathogens causing Morchella disease, Z. penicillatus and Cladobotryum protrusum, it was found that they had similar proportions of carbohydrate enzyme types and encoded abundant cell wall degrading enzymes, such as chitinase and glucanase, indicating their important role in disease development. Moreover, the secondary metabolite gene clusters of P. longispora and Z. penicillatus show a high degree of similarity to leucinostatin A and leucinostatin B (peptaibols). Furthermore, a gene cluster with synthetic toxic substance Ochratoxin A was also identified in P. longispora and C. protrusum, indicating that they may pose a potential threat to food safety. This study provides valuable insights into the genome of P. longispora, contributing to pathogenicity research.

Impact of Antifungal Prophylaxis Continuation or Discontinuation After Allogeneic Hematopoietic Cell Transplant on the Incidence of Invasive Mold Infection.

Background: Continuing antifungal prophylaxis (AFPx) to prevent invasive mold infections (IMIs) in recipients of allogeneic hematopoietic cell transplantation (alloHCT) after primary hospital discharge from alloHCT admission varies among transplant centers despite recommendations to continue prophylaxis through day +75. Characteristics driving AFPx prescribing at hospital discharge and outcomes are unknown. Methods: In this retrospective analysis, we reviewed patients continuing AFPx vs no AFPx at hospital discharge. We included patients with a hospital stay ≥7 days and ≤40 days. We excluded patients with a history of IMI prior to alloHCT, new IMI during admission, or death prior to discharge. Our primary objective was incidence of probable or proven IMI per the European Organization for Research and Treatment of Cancer and the Mycoses Study Group Education and Research Consortium. Our secondary objectives were nonrelapse mortality at day +100, overall survival at day +100, and characteristics driving AFPx discontinuation at hospital discharge. Results: Of the 430 patients identified, 387 met inclusion criteria. At discharge, 56% (217/387) continued AFPx, and 44% (170/387) had no AFPx. At day +100, 3 probable IMI cases occurred in the group with continued AFPx vs 1 probable IMI case in the no-AFPx group (no proven IMI). Univariate analysis showed no difference in cumulative incidence of probable IMI (P = .440), nonrelapse mortality (P = .072), and overall survival (P = .855) between groups. Multivariable logistic regression demonstrated that patients were less likely to continue AFPx if they had a diagnosis other than acute myeloid leukemia, a length of stay ≤30 days, acute graft-vs-host disease grade 0 or 1, and corticosteroid use ≤5 days. Conclusions: There was no difference in probable IMI at day +100 after alloHCT based on continuing vs discontinuing AFPx at hospital discharge after alloHCT admission supporting a risk-adapted prophylaxis approach.

Cost and Time Reduction of Industrial Mold Design and Manufacturing by Implementing Additive Manufacturing for Premature Neonatal Prong.

INTRODUCTION: For a long time, molding was one of the most important methods of producing metal, ceramic, and polymer materials. The two essential factors in this method were always cost and time. Technology advancements have made it possible to design in 3D using a computer and additive manufacturing. This article covers methods for using 3D printers to save time and money in the process of creating the final product. The "Prong" molds for premature neonatal respiratory aid were designed and produced based on neonatologists' considerations. METHODS: The study was conducted on fifteen very low birth neonates at Alzahra Hospital in Tabriz University from September 2017 to September 2019. In the first section, we described dental plaster material for molding. When using this material, the printing material must be selected and the parameters, like melting temperature and printer speed, must be controlled to achieve acceptable quality for the final sample. CAD software can be used to print various objects if the final 3D design is appropriate. RESULTS: We used additive manufacturing technology to create a new design and successfully resolved bubble issues at a low cost through a combination of creativity and experimentation. The new mold has cavities that allow the silicon to occupy the entire space and escape any bubbles. CONCLUSION: The use of 3D printers allows us to achieve the best design for the prong mold while reducing both production costs and time. The ultimate mold made of aluminum was finally produced by the CNC machine. The final product was tested at Al-Zahra Hospital in Tabriz, Iran, and the results were satisfactory, with no reports of necrosis on the babies' noses.

A Cost-Effective Approach to Creating Large Silicone Rubber Molds Using Advanced Rigid Polyurethane Foam.

In practical applications, polyurethane (PU) foam must be rigid to meet the demands of various industries and provide comfort and protection in everyday life. PU foam components are extensively used in structural foam, thermal insulation, decorative panels, packaging, imitation wood, and floral foam, as well as in models and prototypes. Conventional technology for producing PU foam parts often leads to defects such as deformation, short shots, entrapped air, warpage, flash, micro-bubbles, weld lines, and voids. Therefore, the development of rigid PU foam parts has become a crucial research focus in the industry. This study proposes an innovative manufacturing process for producing rigid PU foam parts using silicone rubber molds (SRMs). The deformation of the silicone rubber mold can be predicted based on its wall thickness, following a trend equation with a correlation coefficient of 0.9951. The volume of the PU foam part can also be predicted by the weight of the PU foaming agent, as indicated by a trend equation with a correlation coefficient of 0.9824. The optimal weight ratio of the foaming agent to water, yielding the highest surface hardness, was found to be 5:1. The surface hardness of the PU foam part can also be predicted based on the weight of the water used, according to a proposed prediction equation with a correlation coefficient of 0.7517. The average surface hardness of the fabricated PU foam part has a Shore O hardness value of approximately 75. Foam parts made with 1.5 g of water added to 15 g of a foaming agent have the fewest internal pores, resulting in the densest interior. PU foam parts exhibit excellent mechanical properties when 3 g of water is added to the PU foaming agent, as evidenced by their surface hardness and compressive strength. Using rigid PU foam parts as a backing material in the proposed method can reduce rapid tool production costs by about 62%. Finally, an innovative manufacturing process for creating large SRMs using rigid PU foam parts as backing material is demonstrated.

Curse or blessing: Growth- and laccase-modulating properties of polyphenols and their oxidized derivatives on Botrytis cinerea.

Infection of grapevines with the grey mold pathogen Botrytis cinerea results in severe problems for winemakers worldwide. Browning of wine is caused by the laccase-mediated oxidation of polyphenols. In the last decades, Botrytis management has become increasingly difficult due to the rising number of resistances and the genetic variety of Botrytis strains. During the search for sustainable fungicides, polyphenols showed great potential to inhibit fungal growth. The present study revealed two important aspects regarding the effects of grape-specific polyphenols and their polymerized oxidation products on Botrytis wild strains. On the one hand, laccase-mediated oxidized polyphenols, which resemble the products found in infected grapes, showed the same potential for inhibition of growth and laccase activity, but differed from their native forms. On the other hand, the impact of phenolic compounds on mycelial growth is not correlated to the effect on laccase activity. Instead, mycelial growth and relative specific laccase activity appear to be modulated independently. All phenolic compounds showed not only inhibitory but also inductive effects on fungal growth and/or laccase activity, an observation which is reported for the first time. The simultaneous inhibition of growth and laccase activity demonstrated may serve as a basis for the development of a natural botryticide. Yet, the results showed considerable differences between genetically distinguishable strains, impeding the use of a specific phenolic compound against the genetic variety of wild strains. The present findings might have important implications for future understanding of Botrytis cinerea infections and sustainable Botrytis management including the role of polyphenols.

UV-exposure decreases antimicrobial activities of a grapevine cane extract against Plasmopara viticola and Botrytis cinerea as a consequence of stilbene modifications-a kinetic study.

BACKGROUND: Stilbenoid extracts, such as those originating from grapevine by-products (e.g. canes), are of interest for use as biopesticides in vineyard owing to their antimicrobial activities. However, stilbenoids are unstable in the environment, especially under light. This study aimed to chemically characterize the effect of UV light on stilbenoids present in a grapevine cane extract (CE), and to evaluate the antimicrobial activities against two major grapevine pathogens (Plasmopara viticola and Botrytis cinerea) of grapevine extracts exposed to UV. RESULTS: Treatment with UV (365 nm) on a grapevine CE led to degradation of stilbenoids (up to 71% after 1 h). The stilbenoid stability depended on their chemical structure: only those possessing CC, as trans-resveratrol and trans-ε-viniferin, were affected with first their isomerization and secondly their oxidation/cyclization. As a consequence, UV-exposed extracts (UV-CEs) showed reduced antimicrobial activities against the two pathogens (mycelium and spores). For instance, regarding P. viticola, an UV-CE exposed during 4 h showed an almost total loss of its activity on oomycete development and a 2.4-fold inhibition of zoospore mobility in comparison to CE. For B. cinerea, the inhibition capacity of the same UV-CE was reduced by only 1.1-fold on mycelial development and by 3.2-fold on conidial germination compared to CE. CONCLUSION: UV light triggered modifications on the structure of bioactive stilbenoids, resulting in losses of their antimicrobial activities. Photoprotection of stilbenoids has to be considered in the perspective of using them in vineyards as biopesticides. © 2024 The Author(s). Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Functionalized flattened bamboo board: In-situ immersion assembly of flame-retardant, waterproof and anti-mold composite coatings.

The flattened bamboo board (FB) represents a promising innovation in the bamboo industry. To address the challenges of flammability and hygroscopicity, composite coatings consisting of melamine (MEL), phytic acid (PA), cerium ions (Ce3+), and sodium laurate (La) are assembled on the FB surface through an in-situ impregnation strategy. The resulting MEL/PA-Ce3+@La FB exhibits exceptional flame retardancy. It achieves a V-0 rating in the vertical burning test (UL-94) and boasts a high limiting oxygen index (LOI) value of 38.5 %. The coated FB exhibits superhydrophobicity, evidenced by a water contact angle of 156.5°, which can be attributed to the in-situ growth of PA-Ce3+ complexes (for constructing micro/nanoscale coarse structures) and the modification with La (for reducing surface energy).This superhydrophobic surface imparts both self-cleaning and anti-mold properties to the coated FB. Moreover, the coated FB exhibits excellent mechanical stability, withstanding 36 cycles of sandpaper abrasion and tape peeling without losing its hydrophobicity. In summary, this work provides an innovative strategy for the bamboo processing industry to produce flattened bamboo boards with combined flame retardancy, superhydrophobic and anti-mold properties. Such versatility holds significant potential to facilitate the utilization of flattened bamboo boards in the construction and decorative materials industries.

Quantitative and qualitative assessment of airborne microorganisms during gross anatomical class and the bacterial and fungal load on formalin-embalmed corpses.

Mold growth on body donations remains an underreported yet serious issue in anatomical teaching. Bacterial and fungal growth pose health risks to lecturers and students, alongside with ethical and aesthetic concerns. However, limited information exists on the presence of bacteria and fungi on body donations and their underlying causes. To investigate the potential impact of airborne germs on body donation contamination, we conducted indoor air measurements before, during, and after our anatomical dissection course, with outdoor measurements serving as a control. Tissue samples from the dissected body donations were collected to assess the germ load, with qualitative and quantitative microbiological analyses. Air samples from the dissection hall contained no fungi, but various fungal species were identified in the adjacent stairways and outdoors which implies that fungal occurrence in the dissection hall air was independent of lecturers' and students' presence. Moreover, our results indicate that adequate ventilation filters can effectively reduce indoor fungal germs during courses, while the bacterial load in room air appears to increase, likely due to the presence of lecturers and students. Additionally, the tissue samples revealed no bacterial or fungal germs which implies that our ethanol-formalin-based embalming solution demonstrates an effective long-term antimicrobial preservation of corpses.

Different Morphotypes of Physarum polycephalum as Models for Chemotaxis and Locomotion.

The acellular slime mold Physarum polycephalum is a large, unicellular amoeba, which, due to its huge size, is well suited to investigate chemotaxis and cellular locomotion. The myxomycete has an astonishing behavioral repertoire and is highly responsive to changes in its environment, which map to changes in its tubular network, internal cytoplasm flow, and cytoskeleton. The behavioral repertoire includes problem-solving, decision-making, and memory. P. polycephalum's chemo- and phototaxis are especially well studied. This chapter describes how to cultivate different morphotypes of P. polycephalum (micro-, meso-, and macroplasmodia). Furthermore, the setup of a chemotaxis experiment and the acquisition and analysis of chemotaxis data is described.

Mycotoxin contamination in moldy slices of bread is mostly limited to the immediate vicinity of the visible infestation.

Bread is an important staple food that is susceptible to spoilage, making it one of the most wasted foods. To determine the safety of partially moldy bread, five types of bread were inoculated with common mold species. After incubation, the metabolite profile was determined in and under the inoculation spot, as well as at a lateral distance of 3 cm from the moldy spot. The result showed that the metabolites were exclusively concentrated in the inoculation area and directly below the inoculation area. The only exception was citrinin, a mycotoxin produced by Penicillia such as Penicillium citrinum, which was detected in almost all tested bread areas when inoculated with the corresponding strains. The results of our study suggest that the removal of moldy parts may be a solution to reduce food waste if the remaining bread is to be used, for example for insect farming to produce animal feed.

Cationic Gas-Permeable Mold Fabrication Using Sol-Gel Polymerization for Nano-Injection Molding.

Cationic gas-permeable molds fabricated via sol-gel polymerization undergo cationic polymerization using epoxide, resulting in gas permeability owing to their cross-linked structures. By applying this cationic gas-permeable mold to nano-injection molding, which is used for the mass production of resins, nano-protrusion structures with a height of approximately 300 nm and a pitch of approximately 400 nm were produced. The molding defects caused by gas entrapment in the air and cavities when using conventional gas-impermeable metal molds were improved, and the cationic gas-permeable mold could be continuously fabricated for 3000 shots under non-vacuum conditions. The results of the mechanical evaluations showed improved thermal stability and Martens hardness, which is expected to lead to the advanced production of resin nano-structures. Furthermore, the surface roughness of the nano-protrusion structures fabricated using injection molding improved the water contact angle by approximately 46°, contributing to the development of various hydrophobic materials in the future.

Reciprocal inhibition of autophagy and Botrytis cinerea-induced programmed cell death in 'Shine Muscat' grapes.

Botrytis cinerea causes gray mold, decreasing the quality of table grapes. The berry response to B. cinerea infection was explored in present study, focusing on the relationship between presence of autophagy and programmed cell death (PCD). Results demonstrated B. cinerea infection decreased cell viability, triggering cell death, possibly resulting in PCD occurrence. It was further verified by increased terminal deoxynucleotidyl transferase dUTP nick-end labeling (TUNEL)-positive nuclei, heightened caspase 3-like and caspase 9-like protease activity, and elevated expression of metacaspase genes. Additionally, autophagy was indicated by the increased VvATG expression and autophagosome formation. Notably, the autophagy activator rapamycin reduced TUNEL-positive nuclei, whereas the autophagy inhibitor 3-methyladenine increased caspase 9-like protease activity. The PCD activator C2-ceramide inhibited autophagy, whereas the PCD inhibitor Acetyl-Asp-Glu-Val-Asp-aldehyde (Ac-DEVD-CHO) enhanced autophagy gene expression. Autophagy and B. cinerea-induced PCD in berry cells are reciprocally negatively regulated; and the rapamycin and Ac-DEVD-CHO could potentially maintain table grape edible quality.

Postbiotics in the Bakery Products: Applications and Nutritional Values.

In recent years, the consumption of postbiotics has gained significant attention due to their potential health benefits. However, their application in the bakery industry remains underutilized. This review focuses on recent advances in the use of postbiotics, specifically the metabolites of lactic acid bacteria, in bakery products. We provide a concise overview of the multifaceted benefits of postbiotics, including their role as natural antioxidants, antimicrobials, and preservatives, and their potential to enhance product quality, extend shelf-life, and contribute to consumer welfare. This review combines information from various sources to provide a comprehensive update on recent advances in the role of postbiotics in bakery products, subsequently discussing the concept of sourdough as a leavening agent and its role in improving the nutritional profile of bakery products. We highlighted the positive effects of postbiotics on bakery items, such as improved texture, flavor, and shelf life, as well as their potential to contribute to overall health through their antioxidant properties and their impact on gut health. Overall, this review emphasizes the promising potential of postbiotics to revolutionize the bakery industry and promote healthier and more sustainable food options. The integration of postbiotics into bakery products represents a promising frontier and offers innovative possibilities to increase product quality, reduce food waste, and improve consumer health. Further research into refining techniques to incorporate postbiotics into bakery products is essential for advancing the health benefits and eco-friendly nature of these vital food items.

Fractional exhaled nitric oxide (FeNO) among school children in Java and Sumatra, Indonesia: associations with respiratory symptoms, house dust mite sensitization and the home environment.

OBJECTIVE: To study associations between fractional exhaled nitric oxide (FeNO) and asthma, airway symptoms, sensitization to common allergens, outdoor pollution and home environment among 380 students in eight junior high schools in two areas in Indonesia. METHODS: Data on health and home were collected by a face-to face interview before measuring FeNO and performing skin prick test against common allergens. Exploratory linear mixed and logistic regression models were employed. RESULTS: Geometric mean of FeNO was 17.8 ppb (GSD 2.09) and 139 students (36.6%) had elevated FeNO (>20 ppb). In total, 107 students (28.2%) were sensitized to house dust mite (HDM) (Der p1 or Der f1), 4 (1.1%) to cat and 3 (0.8%) to mold (Cladosporium or Alternaria). Moreover, 20 students (5.3%) had diagnosed asthma, 38 (10.0%) had current wheeze, and 107 (28.2%) had current rhinitis. HDM sensitization, diagnosed asthma, current wheeze, and current rhinitis were associated with FeNO. In total, 281 students (73.9%) had mold or dampness, 232 (61.1%) had environmental tobacco smoke (ETS) and 43 (11.3%) had other odor at home. Indoor mold or dampness and other odor at home were associated with FeNO. ETS was negatively associated with FeNO. CONCLUSION: HDM sensitization and elevated FeNO can be common among children in this part of Indonesia. The high prevalence of elevated FeNO indicate that undiagnosed childhood asthma is common. Dampness, mold and odor at home can be associated with increased FeNO while ETS can be associated with decreased FeNO.

Liver Phantoms Cast in 3D-Printed Mold for Image-Guided Procedures.

INTRODUCTION: Image-guided invasive procedures on the liver require a steep learning curve to acquire the necessary skills. The best and safest way to achieve these skills is through hands-on courses that include simulations and phantoms of different complications, without any risks for patients. There are many liver phantoms on the market made of various materials; however, there are few multimodal liver phantoms, and only two are cast in a 3D-printed mold. METHODS: We created a virtual liver and 3D-printed mold by segmenting a CT scan. The InVesalius and Autodesk Fusion 360 software packages were used for segmentation and 3D modeling. Using this modular mold, we cast and tested silicone- and gelatin-based liver phantoms with tumor and vascular formations inside. We tested the gelatin liver phantoms for several procedures, including ultrasound diagnosis, elastography, fibroscan, ultrasound-guided biopsy, ultrasound-guided drainage, ultrasound-guided radio-frequency ablation, CT scan diagnosis, CT-ultrasound fusion, CT-guided biopsy, and MRI diagnosis. The phantoms were also used in hands-on ultrasound courses at four international congresses. RESULTS: We evaluated the feedback of 33 doctors regarding their experiences in using and learning on liver phantoms to validate our model for training in ultrasound procedures. CONCLUSIONS: We validated our liver phantom solution, demonstrating its positive impact on the education of young doctors who can safely learn new procedures thus improving the outcomes of patients with different liver pathologies.

Plant-Based Alternatives to Mold-Ripened Cheeses as an Innovation among Dairy Analogues.

There is a growing demand for vegan products and plant-based food when dealing with the impact of livestock on the climate crisis. The aim of this study was to develop a formulation for a plant-based analogue of mold-ripened cheese. Were investigated the following plant materials: cashews, pistachios, soy flour, chickpea flour, pea protein, pumpkin protein, hemp protein, and spirulina powder. Plant matrices were fermented with lactic acid bacteria (LAB) starter cultures and cheese starter cultures of mold species Geotrichum candidum and Penicillium camemberti. All microorganisms' growth were tested in a vegan-type culture medium. Calcium supplementation was applied and followed by an in-depth analysis of the elemental composition of selected analogues with inductively coupled plasma optical emission spectroscopy. The physicochemical and organoleptic analyses of plant-based alternatives of Camembert were conducted. This is the first paper describing novel formulations for plant-based alternatives for Camembert cheese prepared with techniques mimicking the original milk product.

Enhancing the Storage Longevity of Apples: The Potential of Bacillus subtilis and Streptomyces endus as Preventative Bioagents against Post-Harvest Gray Mold Disease, Caused by Botrytis cinerea.

Gray mold, caused by Botrytis cinerea Pers. Fr., is one of the most vital plant diseases, causing extensive pre- and post-harvest losses in apple fruits. In the current study, we isolated and identified two potential endophytic bioagents, Bacillus subtilis and Streptomyces endus. Both bioagents exhibited a potent fungistatic effect against B. cinerea under both in vitro and in planta conditions. Moreover, two experiments were carried out; (i) the first experiment was conducted at room temperature after artificial inoculation with B. cinerea to monitor the progression of the infection and the corresponding biochemical responses of the apples. Our in vivo findings showed that the treated B. cinerea-infected apple fruits with the cell-free bacterial filtrate of B. subtilis and S. endus (dipping or wrapping) significantly reduced the rotten area of the treated apple at room temperature. Additionally, B. subtilis and S. endus enhanced the enzymatic (POX and PPO) and non-enzymatic (phenolics and flavonoids) antioxidant defense machinery in treated apples. (ii) The second experiment focused on the preventive effects of both bioagents over a 90-day storage period at 1 °C of healthy apples (no artificial inoculation). The application of both bacterial filtrates prolonged the storage period, reduced the relative weight loss, and maintained high-quality parameters including titratable acidity, firmness, and total soluble solids of apple fruits under cold storage at 1 °C. The Kaplan-Meier analysis of rotten apples over 90 days during cold storage showed that the treated apples lasted longer than the non-treated apples. Moreover, the lifespan of apple fruits dipped in the culture filtrate of B. subtilis, or a fungicide, was increased, with no significant differences, compared with the non-treated apples. The current results showed the possibility of using both bioagents as a safe and eco-friendly alternative to chemical fungicides to control gray mold disease in apples.

Formic acid sandwich method is well-suited for filamentous fungi identification and improves turn around time using Zybio EXS2600 mass spectrometry.

OBJECTIVES: Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) is extensively employed for the identification of filamentous fungi on MALDI Biotyper (Bruker Daltonics) and Vitek MS (biomerieux), but the performance of fungi identification on new EXS2600 (Zybio) is still unknow. Our study aims to evaluate the new EXS2600 system's (Zybio) ability to rapidly identify filamentous fungi and determine its effect on turnaround time (TAT) in our laboratory. METHODS: We tested 117 filamentous fungi using two pretreatment methods: the formic acid sandwich (FA-sandwich) and a commercial mold extraction kit (MEK, Zybio). All isolates were confirmed via sequence analysis. Laboratory data were extracted from our laboratory information system over two 9-month periods: pre-EXS (April to December 2022) and post-EXS (April to December 2023), respectively. RESULTS: The total correct identification (at the species, genus, or complex/group level) rate of fungi was high, FA-sandwich (95.73%, 112/117), followed by MEK (94.02%, 110/117). Excluding 6 isolates not in the database, species-level identification accuracy was 92.79% (103/111) for FA-sandwich and 91.89% (102/111) for MEK; genus-level accuracy was 97.29% (108/111) and 96.39% (107/111), respectively. Both methods attained a 100% correct identification rate for Aspergillus, Lichtheimia, Rhizopus Mucor and Talaromyces species, and were able to differentiate between Fusarium verticillioides and Fusarium proliferatum within the Fusarium fujikuroi species complex. Notably, high confidence was observed in the species-level identification of uncommon fungi such as Trichothecium roseum and Geotrichum candidum. The TAT for all positive cultures decreased from pre EXS2600 to post (108.379 VS 102.438, P < 0.05), and the TAT for tissue decreased most (451.538 VS 222.304, P < 0.001). CONCLUSIONS: The FA-sandwich method is more efficient and accurate for identifying filamentous fungi with EXS2600 than the MEK. Our study firstly evaluated the performance of fungi identification on EXS2600 and showed it is suitable for clinical microbiology laboratories use.

Identification and evaluation of an endophytic antagonistic yeast for the control of gray mold (Botrytis cinerea) in apple and mechanisms of action.

Gray mold, caused by Botrytis cinerea, is a prevalent postharvest disease of apple that limits their shelf life, resulting in significant economic losses. The use of antagonistic microorganisms has been shown to be an effective approach for managing postharvest diseases of fruit. In the present study, an endophytic yeast strain PGY-2 was isolated from apples and evaluated for its biocontrol efficacy against gray mold and its mechanisms of action. Results indicated that strain PGY-2, identified as Bullera alba, reduced the occurrence of gray mold on apples and significantly inhibited lesion development in pathogen-inoculated wounds. Gray mold control increased with the use of increasing concentrations of PGY-2, with the best disease control observed at 108 cells/mL. Notably, Bullera alba PGY-2 did not inhibit the growth of Botrytis cinerea in vitro indicating that the yeast antagonist did not produce antimicrobial compounds. The rapid colonization and stable population of PGY-2 in apple wounds at 4 °C and 25 °C confirmed its ability to compete with pathogens for nutrients and space. PGY-2 also had a strong ability to form a biofilm and enhanced the activity of multiple defense-related enzymes (POD, PPO, APX, SOD, PAL) in host tissues. Our study is the first time to report the use of Bullera alba PGY-2 as a biocontrol agent for postharvest diseases of apple and provide evidence that Bullera alba PGY-2 represents an endophytic antagonistic yeast with promising biocontrol potential and alternative to the use of synthetic, chemical fungicides for the control of postharvest gray mold in apples.