Planar XY magnetic glass state in the Gd2ScNbO7pyrochlore.

Here a spin glass system with emergent planar ordered spin clusters is investigated. The mixed B-site pyrochlore Gd2ScNbO7has been synthesized and characterized through a variety of techniques, including x-ray diffraction, magnetic susceptibility, muon spin relaxation, heat capacity and neutron scattering. Despite a Curie-Weiss temperature of -3.93(3) K, indicating net antiferromagnetic interactions, no signs of long ranged magnetic ordering are found down to T = 0.3 K. Instead, a disordered magnetic state emerges with a small correlation length of 2.1(1) Angstroms of single tetrahedra. A RMC analysis of the polarized neutron scattering data reveals short-range antiferromagnetic order with emergent XY spin ordering similar to the parent pyrochlore compounds. Muon spin relaxation, and AC susceptibility measurements confirm that the magnetization condenses into a glass, with 10 % of the potential entropy missing in the specific heat. This magnetic ground state is similar to what is observed in Gd2Sn2O7just above the ordering temperature, without the eventual long-range ordering at low temperature. .

Comparison of the global crystallographic texture of minerals in the shells of Bathymodiolus thermophilus Kenk et B.R. Wilson, 1985 and species of the genus Mytilus Linnaeus, 1758.

The global crystallographic texture of calcite and aragonite in the shells of the bivalves Bathymodiolus thermophilus, Mytilus galloprovincialis, M. edulis and M. trossulus was studied by means of neutron diffraction. It was revealed that the general appearance of pole figures isolines of both minerals coincides for the studied species. The crystallographic texture sharpness evaluated by means of pole density on the calcite pole figures ((0006), (101¯4)) and aragonite pole figures ((012)/(121), (040)/(221)) coincides or has close values for deep-sea hydrothermal species B. thermophilus and the studied shallow-water species of the genus Mytilus. The calcite pole figures 0006 and (101¯4) of B. thermophilus show a shift in the position of texture maximum values compared to corresponding pole figures of other mussels. The shell microstructure of all studied mollusks is similar, only the shape of the fibers of B. thermophilus differs. Global crystallographic texture is a stable feature of the family Mytilidae. The extreme habitat conditions of the hydrothermal biotope do not significantly affect the crystallographic texture of B. thermophilus.

The Non-centrosymmetric Borate Hydride Sr4Ba3(BO3)3.83H2.5.

Sr4Ba3(BO3)3.83H2.5, as the second compound to combine borate and hydride ions, has been synthesized by a mechanochemical synthesis route. The structure has been elucidated by synchrotron X-ray and neutron diffraction and determined to crystallize in the non-centrosymmetric space group P63mc (186) with the cell parameters a = 10.87762(15) Å and c = 6.98061(11) Å. A detailed investigation of the compound by vibrational spectroscopy in combination with Density Functional Theory calculations reveals the disordered nature of the structure and proves the presence of both borate and hydride ions. Electronic band structure calculations predict a large band gap of 7.1 eV. Hydride states are predicted at the topmost valence band, which agrees well with earlier reported heteroanionic hydrides. We hereby were able to successfully apply previously synthetic and analytical schemes to introduce another member of the rare compounds that contain complex oxoanions simultaneously with hydride ions.

In silico assessments of the small molecular boron agents to pave the way for artificial intelligence-based boron neutron capture therapy.

Boron neutron capture therapy (BNCT) is a highly targeted, selective and effective technique to cure various types of cancers, with less harm to the healthy cells. In principle, BNCT treatment needs to distribute the 10boron (10B) atoms inside the tumor tissues, selectively and homogeneously, as well as to initiate a nuclear fission reaction by capturing sufficient neutrons which releases high linear energy particles to kill the tumor cells. In BNCT, it is crucial to have high quality boron agents with acceptable bio-selectivity, homogeneous distribution and deliver in required quantity, similar to chemotherapy and other radiotherapy for tumor treatment. Nevertheless, boron drugs currently used in clinical trials yet to meet the full requirements. On the other hand, BNCT processing has opened up the era of renaissance due to the advanced development of the high-quality neutron source and the global construction of new BNCT centers. Consequently, there is an urgent need to use boron agents that have increased biocapacity. Artificial intelligence (AI) tools such as molecular docking and molecular dynamic simulation technologies have been utilized to develop new medicines. In this work, the in silico assessments including bioinformatics assessments of BNCT related tumoral receptor proteins, computational assessments of optimized small molecules of boron agents, are employed to speed up the screening process for boron drugs. The outcomes will be applicable to pave the way for future BNCT that utilizes artificial intelligence. The in silico molecular docking and dynamic simulation results of the optimized small boron agents, such as 4-borono-l-phenylalanine (BPA) with optimized proteins like the L-type amino acid transporter 1 (LTA1, also known as SLC7A5) will be examined. The in silico assessments results will certainly be helpful to researchers in optimizing druggable boron agents for the BNCT application. The clinical status of the optimized proteins, which are highly relevant to cancers that may be treated with BNCT, has been assessed using bioinformatics technology and discussed accordingly. Furthermore, the evaluations of cytotoxicity (IC50), boron uptake and tissue distribution of the optimized ligands 1 and 7 have been presented.

Modulating the isotopic hydrogen-deuterium exchange in functionalized nanocellulose to optimize SANS contrast.

Contrast matching by isotopic exchange in cellulose allows visualizing functional groups, biomolecules, polymers and nanoparticles embedded in cellulosic composites. This isotopic exchange varies the scattering length density of cellulose to match its contrast with the background network. Here, contrast matching of microcrystalline-cellulose (MCC) and the functionalized nanocellulose-fiber (CNF) and cellulose nanocrystals (CNC) are elucidated by small angle neutron scattering (SANS). Results show no isotopic exchange occurs for the CNF surface functionalized with carboxyl nor for the CNC-High with a high sulfate groups concentration. Both CNC-Low, with low sulfate groups, and MCC exchange 1H with 1D in D2O. This is due to the high exchange probability of the labile C6 position primary -OH group. The structure of thermo-responsive poly-N-isopropylacrylamide (PNIPAM) chains grafted onto CNF (PNIPAM-grafted-CNF) was extracted by CNF contrast matching near the lower critical solution temperature. Contrast matching eradicates the CNF scattering to retain only the scattering from the grafted-PNIPAM chains. The coil to globule thermo-transition of PNIPAM was revealed by the power law variation from q-1.3 to q-4 in SANS. Isotopic exchange in functionalized cellulosic materials reveals the nano- and micro-scale structure of its individual components. This improved visualization by contrast matching can be extended to carbohydrate polymers to engineer biopharmaceutical and food applications.

Molecular Probe with Potential for Combined Boron Neutron Capture and Photothermal Antitumor Therapy.

Both boron neutron capture therapy (BNCT) and photothermal therapy (PTT) have been applied to tumor treatment in clinical. However, their therapeutic efficacy is limited. For BNCT, the agents not only exhibit poor targeting ability but also permit only a single irradiation session within a course due to significant radiation risks. In the context of PTT, despite enhanced selectivity, the limited photothermal effect fails to meet clinical demands. Hence, the imperative arises to combine these two therapies to enhance tumor-killing capabilities and improve the targeting of BNCT agents by leveraging the advantages of PTT agents. In this study, we synthesized a potential responsive agent by linking 4-mercaptophenylboronic acid (MPBA) and IR-780 dye that served as the agents for BNCT and PTT, respectively, which possesses the dual capabilities of photothermal effects and thermal neutron capture. Results from both in vitro and in vivo research demonstrated that IR780-MPBA effectively inhibits tumor growth through its photothermal effect with no significant toxicity. Furthermore, IR780-MPBA exhibited substantial accumulation in tumor tissues and superior tumor-targeting capabilities compared with MPBA, which demonstrated that IR780-MPBA possesses significant potential as a combined antitumor therapy of PTT and BNCT, presenting a promising approach for antitumor treatments.

[Chasing New Cancer Treatments: Current Status and Future Development of Boron Neutron Capture Therapy].

Boron neutron capture therapy (BNCT) is expected to be a promising next-generation cancer treatment. In 2020, Japan, which has led the research on this treatment modality, was the first country in the world to approve BNCT. The boron agents that have been clinically applied in BNCT include a caged boron compound (mercaptoundecahydrododecaborate: BSH) and a boron-containing amino acid (p-boronophenylalanine: BPA). In particular, the BPA preparation Steboronine® is the only approved drug for BNCT. However, the problem with BPA is that it is poorly retained in the tumor and has very low solubility in water. This cannot be overlooked for BNCT, which requires large amounts of boron in the tumor. The high dosage volume, together with low tumor retention, leads to reduced therapeutic efficacy and increased physical burden on the patient. In the case of BSH, its insufficient penetration into the tumor is problematic. Based on drug delivery system (DDS) technology, we have developed a next-generation boron pharmaceutical superior to Steboronine®. Our approach involves the redevelopment of BPA using innovative ionic liquid formulation technology. Here, we describe previous boron agents and introduce our recent efforts in the development of boron compounds.

Assessment of potential toxic elements in soils, sediments, and vegetation in the surroundings of Anapa, Russia.

The study presented here reports the concentration of major, trace, and rare earth elements in soil, sediments, and vegetation samples collected from 13 locations around Anapa City located on the northern coast of the Black Sea in Russia. The neutron activation analysis technique has been used to fulfill this objective. Along with this, the bioconcentration and translocation factors were calculated. Overall, the content of 31 elements was detected in soil and sediments while 20 elements were determined in three types of vegetation: macroalgae (Cystoseira sp. and Ulva sp.), aquatic plants (Phragmites australis), and sea grass (Zostera sp.). The quantified concentration followed the order soil > sediment > vegetation. The phytotoxic levels for Zn, V, Mn, and Fe have been quantified as the highest. Bromine was the most abundant and accumulated in Phragmites australis. Based on the results obtained from this investigation, there is a possibility of contamination in the study area.

Radiochemical neutron activation analysis of elemental contents in crude phosphoric acid samples and studies on adsorption removal of these elements using synthesized bionanocomposites.

Harmful elements in Egyptian phosphoric acid were identified by radiochemical neutron activation analysis. In the Second Egyptian Nuclear Research Reactor, precipitates were created and examined to identify many types of contaminants (Ce, Co, Cr, etc.). New bionanocomposite materials effectively removed with a high proportion each of Ce, Th, Pa, U, Np, Zn, and Co (100%) and a somewhat lower percentage (65-85%) for Cr, Sc, and Fe from simulated solutions, suggesting promise for purifying phosphoric acid.

Revealing the Structural Intricacies of Biomembrane-Interfaced Emulsions with Small- and Ultra-Small-Angle Neutron Scattering.

Utilizing cell membranes from diverse cell types for biointerfacing has demonstrated significant advantages in enhancing colloidal stability and incorporating biological properties, tailored specifically for various biomedical applications. However, the structures of these materials, particularly emulsions interfaced with red blood cell (RBC) or platelet (PLT) membranes, remain an underexplored area. This study systematically employs small- and ultra-small-angle neutron scattering (SANS and USANS) with contrast variation to investigate the structure of emulsions containing perfluorohexane within RBC (RBC/PFH) and PLT membranes (PLT/PFH). The findings reveal that the scattering length density of RBC and PLT membranes is 1.5 × 10-6 Å-2, similar to 30% (w/w) deuterium oxide. Using this solvent as a cell membrane-matching medium, estimated droplet diameters are 770 nm (RBC/PFH) and 1.5 µm (PLT/PFH), based on polydispersed sphere model fitting. Intriguingly, calculated patterns and invariant analysis reveal native droplet architectures featuring entirely liquid PFH cores, differing significantly from the observed bubble-droplet core system in electron microscopy. This highlights the advantage of SANS and USANS in differentiating genuine colloidal structures in complex dispersions. In summary, this work underscores the pivotal role of SANS and USANS in characterizing biointerfaced colloids and in uncovering novel colloidal structures with significant potential for biomedical applications and clinical translation.

Resolving the interactions between hydrophilic CdTe quantum dots and positively charged membranes at the nanoscale.

The use of quantum dot nanoparticles (QDs) in bio-applications has gained quite some interest and requires a deep understanding of their interactions with model cell membranes. This involves assessing the extent of nanoparticle disruption of the membrane and how it depends on both nanoparticle and membrane physicochemical properties. Surface charge plays an important role in nanoparticle adsorption, which is primarily driven by electrostatic interactions; yet, once adsorbed, most reported works overlook the subsequent spatial nanoparticle insertion and location within the membrane. There is therefore a need for studies to assess the mutual role of membrane and nanoparticle charge into membrane structure and stability at the nanoscale, with a view to better design and control the functionality of these nanomaterials. In this work, we have resolved the extent of the interactions between hydrophilic, negatively charged CdTe QDs and positively charged lipid bilayers. A multiscale combination of surface-sensitive techniques enabled probing how surface charge mediates QD adsorption and membrane reorganization. Increasing membrane surface charge results into a larger adsorption of oppositely charged QDs, concomitantly inducing structural changes. Hydration of the membrane hydrophobic parts by QDs goes deeper into the inner leaflet with increasing membrane charge, resulting in supported lipid bilayers with decreased nanomechanical stability.

Overcoming immunotherapy resistance and inducing abscopal effects with boron neutron immunotherapy (B-NIT).

Immune checkpoint inhibitors (ICIs) are effective against many advanced malignancies. However, many patients are nonresponders to immunotherapy, and overcoming this resistance to treatment is important. Boron neutron capture therapy (BNCT) is a local chemoradiation therapy with the combination of boron drugs that accumulate selectively in cancer and the neutron irradiation of the cancer site. Here, we report the first boron neutron immunotherapy (B-NIT), combining BNCT and ICI immunotherapy, which was performed on a radioresistant and immunotherapy-resistant advanced-stage B16F10 melanoma mouse model. The BNCT group showed localized tumor suppression, but the anti-PD-1 antibody immunotherapy group did not show tumor suppression. Only the B-NIT group showed strong tumor growth inhibition at both BNCT-treated and shielded distant sites. Intratumoral CD8+ T-cell infiltration and serum high mobility group box 1 (HMGB1) levels were higher in the B-NIT group. Analysis of CD8+ T cells in tumor-infiltrating lymphocytes (TILs) showed that CD62L- CD44+ effector memory T cells and CD69+ early-activated T cells were predominantly increased in the B-NIT group. Administration of CD8-depleting mAb to the B-NIT group completely suppressed the augmented therapeutic effects. This indicated that B-NIT has a potent immune-induced abscopal effect, directly destroying tumors with BNCT, inducing antigen-spreading effects, and protecting normal tissue. B-NIT, immunotherapy combined with BNCT, is the first treatment to overcome immunotherapy resistance in malignant melanoma. In the future, as its therapeutic efficacy is demonstrated not only in melanoma but also in other immunotherapy-resistant malignancies, B-NIT can become a new treatment candidate for advanced-stage cancers.

Quality assessment of the wide-angle detection option planned at the high-intensity/extended Q-range SANS diffractometer KWS-2 combining experiments and McStas simulations.

For a reliable characterization of materials and systems featuring multiple structural levels, a broad length scale from a few ångström to hundreds of nanometres must be analyzed and an extended Q range must be covered in X-ray and neutron scattering experiments. For certain samples or effects, it is advantageous to perform such characterization with a single instrument. Neutrons offer the unique advantage of contrast variation and matching by D-labeling, which is of great value in the characterization of natural or synthetic polymers. Some time-of-flight small-angle neutron scattering (TOF-SANS) instruments at neutron spallation sources can cover an extended Q range by using a broad wavelength band and a multitude of detectors. The detectors are arranged to cover a wide range of scattering angles with a resolution that allows both large-scale morphology and crystalline structure to be resolved simultaneously. However, for such analyses, the SANS instruments at steady-state sources operating in conventional monochromatic pinhole mode rely on additional wide-angle neutron scattering (WANS) detectors. The resolution must be tuned via a system of choppers and a TOF data acquisition option to reliably measure the atomic to mesoscale structures. The KWS-2 SANS diffractometer at Jülich Centre for Neutron Science allows the exploration of a wide Q range using conventional pinhole and lens focusing modes and an adjustable resolution Δλ/λ between 2 and 20%. This is achieved through the use of a versatile mechanical velocity selector combined with a variable slit opening and rotation frequency chopper. The installation of WANS detectors planned on the instrument required a detailed analysis of the quality of the data measured over a wide angular range with variable resolution. This article presents an assessment of the WANS performance by comparison with a McStas [Willendrup, Farhi & Lefmann (2004). Physica B, 350, E735-E737] simulation of ideal experimental conditions at the instrument.

Quantitative selection of sample structures in small-angle scattering using Bayesian methods.

Small-angle scattering (SAS) is a key experimental technique for analyzing nanoscale structures in various materials. In SAS data analysis, selecting an appropriate mathematical model for the scattering intensity is critical, as it generates a hypothesis of the structure of the experimental sample. Traditional model selection methods either rely on qualitative approaches or are prone to overfitting. This paper introduces an analytical method that applies Bayesian model selection to SAS measurement data, enabling a quantitative evaluation of the validity of mathematical models. The performance of the method is assessed through numerical experiments using artificial data for multicomponent spherical materials, demonstrating that this proposed analysis approach yields highly accurate and interpretable results. The ability of the method to analyze a range of mixing ratios and particle size ratios for mixed components is also discussed, along with its precision in model evaluation by the degree of fitting. The proposed method effectively facilitates quantitative analysis of nanoscale sample structures in SAS, which has traditionally been challenging, and is expected to contribute significantly to advancements in a wide range of fields.

Demonstration of neutron time-of-flight diffraction with an event-mode imaging detector.

Neutron diffraction beamlines have traditionally relied on deploying large detector arrays of 3He tubes or neutron-sensitive scintillators coupled with photomultipliers to efficiently probe crystallographic and microstructure information of a given material. Given the large upfront cost of custom-made data acquisition systems and the recent scarcity of 3He, new diffraction beamlines or upgrades to existing ones demand innovative approaches. This paper introduces a novel Timepix3-based event-mode imaging neutron diffraction detector system as well as first results of a silicon powder diffraction measurement made at the HIPPO neutron powder diffractometer at the Los Alamos Neutron Science Center. Notably, these initial measurements were conducted simultaneously with the 3He array on HIPPO, enabling direct comparison. Data reduction for this type of data was implemented in the MAUD code, enabling Rietveld analysis. Results from the Timepix3-based setup and HIPPO were benchmarked against McStas simulations, showing good agreement for peak resolution. With further development, systems such as the one presented here may substantially reduce the cost of detector systems for new neutron instrumentation as well as for upgrades of existing beamlines.

Accessing self-diffusion on nanosecond time and nanometre length scales with minute kinetic resolution.

Neutron spectroscopy uniquely and non-destructively accesses diffusive dynamics in soft and biological matter, including for instance proteins in hydrated powders or in solution, and more generally dynamic properties of condensed matter on the molecular level. Given the limited neutron flux resulting in long counting times, it is important to optimize data acquisition for the specific question, in particular for time-resolved (kinetic) studies. The required acquisition time was recently significantly reduced by measurements of discrete energy transfers rather than quasi-continuous neutron scattering spectra on neutron backscattering spectrometers. Besides this reduction in acquisition times, smaller amounts of samples can be measured with better statistics, and most importantly, kinetically changing samples, such as aggregating or crystallizing samples, can be followed. However, given the small number of discrete energy transfers probed in this mode, established analysis frameworks for full spectra can break down. Presented here are new approaches to analyze measurements of diffusive dynamics recorded within fixed windows in energy transfer, and these are compared with the analysis of full spectra. The new approaches are tested by both modeled scattering functions and a comparative analysis of fixed energy window data and full spectra on well understood reference samples. This new approach can be employed successfully for kinetic studies of the dynamics focusing on the short-time apparent center-of-mass diffusion.

Evidence of Lone Pair Crafted Emphanisis in the Ruddlesden-Popper Halide Perovskite Cs2PbI2Cl2.

A hallmark of typical structural transformations is an increase in symmetry upon heating due to entropic favourability. However, local symmetry breaking upon warming is recently evidenced in rare crystalline phases. Termed as emphanisis, the phenomenon implores exploration of fascinating thermodynamic nuances that drive unusual structural evolutions. Here, synchrotron X-ray total scattering measurements are presented on a Ruddlesden-Popper mixed halide perovskite, Cs2PbI2Cl2, which reveal signatures of emphanisis. The genesis of symmetry lowering upon heating is traced to a lone pair-driven cooperative local structural distortion composed of thermally actuated Pb off-centring and static Cl displacement. Mapping the thermal evolution of low-lying phonon modes with inelastic neutron scattering uncovers instances of mode hardening with picosecond lifetime and an intriguing soft mode at the X-point of the Brillouin zone-features conducive to ultralow thermal transport. Together, these observations highlight the fundamental and functional implications of chemical design in engendering unconventional phenomena in crystalline materials and associated properties.

Evaluation of calculation accuracy and computation time in a commercial treatment planning system for accelerator-based boron neutron capture therapy.

This study aims to evaluate the feasibility of using a commercially available boron neutron capture therapy (BNCT) dose calculation program (NeuCure® Dose Engine) in terms of calculation accuracy and computation time. Treatment planning was simulated under the following calculation parameters: 1.5-5.0 mm grid sizes and 1-10% statistical uncertainties. The calculated monitor units (MUs) and computation times were evaluated. The MUs calculated on grid sizes larger than 2 mm were overestimated by 2% compared with the result of 1.5 mm grid. We established the two-step method for the routine administration of BNCT: multiple calculations involved in beam optimization should be done at a 5 mm grid and a 10% statistical uncertainty (the shortest computation time: 10.3 ± 2.1 min) in the first-step, and final dose calculations should be performed at a 2 mm grid and a 10% statistical uncertainty (satisfied clinical accuracy: 6.9 ± 0.3 h) in the second-step.

Ultrasound Combination to Improve the Efficacy of Current Boron Neutron Capture Therapy for Head and Neck Cancer.

Boron neutron capture therapy (BNCT) is radiotherapy in which a nuclear reaction between boron-10 (10B) in tumor cells and neutrons produces alpha particles and recoiling 7Li nuclei with an extremely short range, leading to the destruction of the tumor cells. Although the neutron source has traditionally been a nuclear reactor, accelerators to generate neutron beams have been developed and commercialized. Therefore, this treatment will become more widespread. Recurrent head and neck cancer (HNC) close to the body surface is considered a candidate for BNCT using the boron compound boronophenylalanine (BPA) and has been found to be highly responsive to this treatment. However, some cases recur early after the completion of the treatment, which needs to be addressed. Ultrasound is a highly safe diagnostic method. Ultrasound with microbubbles is expected to promote the uptake of BPA into tumor cells. Ultrasound also has the ability to improve the sensitivity of tumor cells to radiotherapy. In addition, high-intensity focused ultrasound may improve the efficacy of BNCT via its thermal and mechanical effects. This review is not systematic but outlines the current status of BPA-based BNCT and proposes plans to reduce the recurrence rate of HNC after BNCT in combination with ultrasound.

Indexing neutron transmission spectra of a rotating crystal.

Neutron time-of-flight transmission spectra of mosaic crystals contain Bragg dips, i.e., minima at wavelengths corresponding to diffraction reflections. The positions of the dips are used for investigating crystal lattices. By rotating the sample around a fixed axis and recording a spectrum at each rotation step, the intensity of the transmitted beam is obtained as a function of the rotation angle and wavelength. The questions addressed in this article concern the determination of lattice parameters and orientations of centrosymmetric crystals from such data. It is shown that if the axis of sample rotation is inclined to the beam direction, the reflection positions unambiguously determine reciprocal-lattice vectors, which is not the case when the axis is perpendicular to the beam. Having a set of such vectors, one can compute the crystal orientation or lattice parameters using existing indexing software. The considerations are applicable to arbitrary Laue symmetry. The work contributes to the automation of the analysis of diffraction data obtained in the neutron imaging mode.