Influence of chickpea protein on the pH and temperature dependent viscosity of carboxymethylated starch.

Proteins can significantly improve the elasticity and microstructure of starch gels in food. In this work, the influence of chickpea protein flour on the viscoelastic behaviour of carboxymethylated starch (CMS, 92.6 mmol COOH kg-1) gels was studied as function of pH and temperature. A weight ratio CMS:protein flour of 1:0.45 was investigated in the pH range of pH 2.5-8. Above pH 7 presence of 7.5 %w/w chickpea flour lead to an increase in complex viscosity of a 16.5 %w/w CMS solution by a factor of 10. The interaction between CMS and protein above pH 4 accelerates gelation at 37 °C, resulting in an increase in viscosity by a factor of 5, 10 and 120 at pH 5, pH 7 and pH 8 respectively. Model calculations for species dissociation of ammonium groups in basic amino acids and carboxylate groups in CMS indicate that electrostatic interactions led to the observed increase in viscosity. The results form a general model to explain the pH-dependent viscoelastic behaviour of polysaccharide-protein mixtures. The understanding of the mechanism of action between protein and polysaccharides is a condition for targeted analysis and explanation of many phenomena of texture, stability and coacervate formation in food processing.

Reduction of circulating IgE and allergens by a pH-sensitive antibody with enhanced FcγRIIb binding.

Allergen-crosslinked IgE triggers allergy by interacting with its receptor on basophils and mast cells. The anti-IgE monoclonal antibody omalizumab can alleviate allergy by competing with the receptor for IgE binding. However, along with neutralization, omalizumab also inhibits IgE degradation, which is clinically associated with high-dose and total IgE accumulation problems. In this study, we have developed an IgE-eliminating antibody on the basis of omalizumab, which has pH-dependent Fabs and an Fc with high affinity for FcγRIIb. In mice, the antibody rapidly eliminated total serum IgE to baseline levels and caused lower free IgE levels than omalizumab. At low dosages, the antibody also exhibited favorable IgE elimination effects. In addition, the antibody can degrade the corresponding allergen with the removal of IgE, addressing the allergy from its source. Introduction of the M252Y/S254T/T256E (YTE) mutation into this antibody prolongs its serum half-life without reducing potency. Thus, this engineered antibody holds a promising therapeutic option for allergy patients. Mechanistic insights are also included in this study.

Investigation of pH-dependent Paclitaxel delivery mechanism employing Chitosan-Eudragit bioresponsive nanocarriers: a molecular dynamics simulation.

Before embarking on any experimental research endeavor, it is advisable to do a mathematical computation and thoroughly examine the methodology. Despite the use of polymeric nanocarriers, the regulation of bioavailability and drug release at the disease site remains insufficient. Several effective methods have been devised to address this issue, including the creation of polymeric nanocarriers that can react to stimuli such as redox potential, temperature, pH, and light. The present study has been utilized all-atom molecular dynamics (AA-MD) and coarse-grained molecular dynamics (CG-MD) methods and illustrated the drug release mechanism, which is influenced by pH, for Chitosan-Eudragit bioresponsive nanocarriers. The aim of current work is to study the molecular mechanism and atomistic interactions of PAX delivery using a Chitosan-Eudragit carrier. The ability of Eudragit polymers to dissolve in various organic solvents employed in the process of solvent evaporation is a crucial benefit in enhancing the solubility of pharmaceuticals. This study investigated the use of Chitosan-Eudragit nanocarriers for delivering an anti-tumor drug, namely Paclitaxel (PAX). Upon analyzing several significant factors affecting the stability of the drug and nanocarrier, it has been shown that the level of stability is more significant in the neutral state than the acidic state. Furthermore, the system exhibits higher stability in the neutral state. The used Chitosan-Eudragit nanocarriers exhibit a stable structure under alkaline conditions, but undergo deformation and release their payloads under acidic conditions. It was demonstrated that the in silico analysis of anti-tumor drugs and carriers' integration could be quantified and validated by experimental results (from previous works) at an acceptable level.

Aggrescan4D: A comprehensive tool for pH-dependent analysis and engineering of protein aggregation propensity.

Aggrescan4D (A4D) is an advanced computational tool designed for predicting protein aggregation, leveraging structural information and the influence of pH. Building upon its predecessor, Aggrescan3D (A3D), A4D has undergone numerous enhancements aimed at assisting the improvement of protein solubility. This manuscript reviews A4D's updated functionalities and explains the fundamental principles behind its pH-dependent calculations. Additionally, it presents an antibody case study to evaluate its performance in comparison with other structure-based predictors. Notably, A4D integrates advanced protein engineering protocols with pH-dependent calculations, enhancing its utility in advising solubility-enhancing mutations. A4D considers the impact of structural flexibility on aggregation propensities, and includes a large set of precalculated predictions. These capabilities should help to open new avenues for both understanding and managing protein aggregation. A4D is accessible through a dedicated web server at https://biocomp.chem.uw.edu.pl/a4d/.

In-situ assembly of polyoxometalate-based metal-organic framework for high-efficiency recovery of uranium.

Extracting uranium from water is crucial for environmental protection and the sustainable nuclear power industry. However, high-efficiency extraction and mild desorption condition still poses significant challenges. Herein, a polyoxometalate-based metal-organic framework (POMOF) for high-performance uranium extraction is prepared by in situ confined encapsulating H3[PW12O40] (PW12) into MIL-101(Cr). The highly dispersed PW12 enables adsorption sites to be sufficiently exposed, supports the pore structure of MIL-101(Cr), while being protected by spatial confinement. Furthermore, its abundant oxygen groups form high-affinity coordination with uranium and provide the pH-dependent conformation switch to achieve selective adsorption and instantaneous structural transformation. The assembly of structure and function makes POMOF exhibit substantial synergistic stability and adsorption capacity. Consequently, the constructed MIL-101(Cr)@PW12 exhibits excellent uranium adsorption ability of 461.88 mg/g, as well as superior selectivity towards a wide variety of metal ions. Remarkably, instantaneous desorption can be achieved in 2 s under mild desorption conditions of 0.005 mol/L HCl, and the adsorption capacity remained at 94.30 % after 8 adsorption cycles. POMOF demonstrates the vast potential for uranium capture from water and offers new insight into designing structure and functional synergistic materials for the selective adsorption and instantaneous desorption of uranium.

Engineering of pH-dependent antigen binding properties for toxin-targeting IgG1 antibodies using light-chain shuffling.

Immunoglobulin G (IgG) antibodies that bind their cognate antigen in a pH-dependent manner (acid-switched antibodies) can release their bound antigen for degradation in the acidic environment of endosomes, while the IgGs are rescued by the neonatal Fc receptor (FcRn). Thus, such IgGs can neutralize multiple antigens over time and therefore be used at lower doses than their non-pH-responsive counterparts. Here, we show that light-chain shuffling combined with phage display technology can be used to discover IgG1 antibodies with increased pH-dependent antigen binding properties, using the snake venom toxins, myotoxin II and α-cobratoxin, as examples. We reveal differences in how the selected IgG1s engage their antigens and human FcRn and show how these differences translate into distinct cellular handling properties related to their pH-dependent antigen binding phenotypes and Fc-engineering for improved FcRn binding. Our study showcases the complexity of engineering pH-dependent antigen binding IgG1s and demonstrates the effects on cellular antibody-antigen recycling.

From leaching data to release estimates: Screening and scenario assessments of electric arc furnace (EAF) slag under unencapsulated use.

Electric arc furnace (EAF) slag is the non-metallic byproduct of the primary U.S. steelmaking process. Much of the slag is marked for secondary uses as aggregates. EAF slags used as construction fill or residential groundcover are directly exposed to the environment, raising concerns of potential leaching impacts. Leaching data of EAF slags as function of eluate pH (Method 1313) and liquid-to-solid ratio (Method 1314) were used to refine an initial list of constituents of potential concern to those with potential to leach at concentrations greater than project thresholds, and to estimate release from EAF slags when used as unencapsulated groundcover. Screening assessment identified 11 of over 20 constituents requiring further assessment. Scenario-based assessments results showed that constituents with high available content and low leaching concentrations (Al, Cr, Co, Mn, Se) are persistent in contacting water over the assessment period while those with limited available content (As, Ba, Mo, V) were depleted. Aging decreased the release of Se while increasing Tl release, likely through a combination of hydration, carbonation, and cracking processes. Increasing fill depth and infiltration rates did not alter leaching concentrations; however, liquid-solid ratio for each assessment interval changed thereby impacting cumulative release.

An internal linker and pH biosensing by phosphatidylinositol 5-phosphate regulate the function of the ESCRT-0 component TOM1.

Target of Myb1 (TOM1) facilitates the transport of endosomal ubiquitinated proteins destined for lysosomal degradation; however, the mechanisms regulating TOM1 during this process remain unknown. Here, we identified an adjacent DXXLL motif-containing region to the TOM1 VHS domain, which enhances its affinity for ubiquitin and can be modulated by phosphorylation. TOM1 is an endosomal phosphatidylinositol 5-phosphate (PtdIns5P) effector under Shigella flexneri infection. We pinpointed a consensus PtdIns5P-binding motif in the VHS domain. We show that PtdIns5P binding by TOM1 is pH-dependent, similarly observed in its binding partner TOLLIP. Under acidic conditions, TOM1 retained its complex formation with TOLLIP, but was unable to bind ubiquitin. S. flexneri infection inhibits pH-dependent endosomal maturation, leading to reduced protein degradation. We propose a model wherein pumping of H+ to the cytosolic side of endosomes contributes to the accumulation of TOM1, and possibly TOLLIP, at these sites, thereby promoting PtdIns5P- and pH-dependent signaling, facilitating bacterial survival.

8-Aminoquinoline derived two Schiff base platforms: Synthesis, characterization, DFT insights, corrosion inhibitor, molecular docking, and pH-dependent antibacterial study.

The current research divulges the synthesis of two new Schiff base (SB) (L NAPH /L O-VAN ) derived from 8-aminoquinoline (8-AMQ) in the presence of 2-hydroxy naphthaldehyde (NAPH) and ortho-vanillin (O-VAN) in CH3OH solvent. They are structurally characterized by spectroscopic methods (IR/Raman/UV-vis/DRS/NMR) and SEM-EDX. SB compounds have a biologically active avenue of azomethine/imine group (H-C=N) that can donate N e's to Mn + ions, showing coordinating flexibility. The -OH and imine (H-C=N) groups are stable in air, light, and alkalis but undergo acidic environments hydrolysis, separating -NH2 and carbonyl compounds. Moreover, buffer solutions with a pH range of 4-6 release aldehyde. Molecular electrostatic potential (MEP), Frontier molecular orbitals (FMO), Fukui function, and Non-linear optical (NLO) were conducted to elucidate SBs chemical potency, optoelectronic significance, and corrosion inhibitor. Accordingly, the calculated ΔE of FMO for L NAPH and L O-VAN is 3.82 and 4.08 eV, ensuring potent biological function. DFT supported the experimental and theoretical IR spectral correlation to enrich better structural insights. NLO-based polarizability (α) and hyperpolarizability (ß) factors successfully explore the potential optoelectronic significance. Molecular docking experiments were simulated against DNA, anti-COVID-19, and E. coli. The potential microbiological activity was screened against the bacterial strains E. coli, Klebsiella, Bacillus, and Pseudomonas sp. based on zone of inhibition and MIC values. These experiments also explored the fact that L NAPH and L O-VAN discourage microbial cell biofilms and corrosion. We extensively covered the as-prepared compounds' pH-dependent bacterial effects.

Theoretical evidence for a pH-dependent effect of carbonate on the degradation of sulfonamide antibiotics.

Carbonate (CO32-/HCO3-) have a significant impact on advanced oxidation processes (AOPs) by consuming reactive free radicals such as HO• to generate CO3•-. However, research on the mechanisms and kinetics of CO3•- remains limited. This study investigates the degradation mechanism and kinetics of sulfonamide antibiotics (SAs) by CO3•- through theoretical calculations. The calculation results revealed that the effect of CO3•- on SAs degradation is pH-dependent due to the dissociable sulfonamide group (-SO2NH-) of SAs in the common water treatment pH range (3-8). The main reaction type of CO3•- with both neutral and anionic molecules of SAs is single electron transfer reaction. Frontier molecular orbital theory (FMO) illustrated that deprotonation of the sulfonamide group of SAs decreases the charge density on the heterocyclic ring, facilitating the electrophilic addition of CO3•-. The second-order rate constants of the neutral and anionic molecules of SAs with CO3•- were calculated as 7.57 × 101∼1.84 × 108 and 1.81 × 107∼7.94 × 109 M-1 s-1, respectively, resulting in an increase in the apparent reaction rate constants with pH. Stepwise multiple linear regression was employed to predict reactivity with anionic sulfonamide antibiotics (SAs-). Two models with outstanding prediction and stability were developed with coefficients of determination R2 of 0.660 and 0.681, respectively. The degradation kinetics simulation indicated that in the UV/H2O2 process in the presence of carbonate, the degradation rate of SAs increased with pH. Furthermore, the contribution of CO3•- to SMX degradation increased while that of HO• decreased. This study highlights the contribution of carbonates to the micropollutant degradation in the UV/H2O2 process as the model, providing theoretical insights into the development of carbonate-based AOPs.

Insights into the pH-dependent mechanism of peracetic acid activation by biochar-supported zero-valent iron/cobalt bimetallic nanoparticles: The shift of reactive sites and the dual role of hydrogen peroxide.

The peracetic acid (PAA)-based water purification process is often controlled by the solution pH. Herein, we explored the usage of biochar (BC) supported zero-valent iron/cobalt nanoparticles (Fe/Co@BC) for triggering PAA oxidation of sulfamethazine (SMT), and discovered the PAA activation mechanisms at different pHs. Fe/Co@BC exhibited extraordinary PAA activation efficiency over the pH range of 3.0-8.2, effectively broadening the working pH of the zero-valent iron nanoparticles (NZVI)-PAA process. Specifically, the SMT removal efficiency increased by 8.3 times in Fe/Co@BC-PAA system compared to the NZVI-PAA system at pH 8.2. Besides, the leaching and recycling experiments indicated the improved stability and reusability of the materials. For the mechanism study, the main reactive species was •OH under acidic conditions and R-O•/Fe(IV) under neutral/alkaline conditions. More interestingly, the reactive sites on Fe/Co@BC shifted from Fe species to Co species as pH increased, and the role of H2O2 in this reaction system also shifted from a radical precursor to a radical scavenger with increasing pH. This study highlights the distinct mechanism of PAA activation by bimetallic composites under different pH conditions and provides a new efficient approach for PAA activation to degrade organic contaminants.

Protonation of palmitic acid embedded in DPPC lipid bilayers obscures detection of ripple phase by FTIR spectroscopy.

The transformation of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) lipid bilayers from the gel (Lß') to the fluid (Lα) phase involves an intermediate ripple (Pß') phase forming a few degrees below the main transition temperature (Tm). While the exact cause of bilayer rippling is still debated, the presence of amphiphilic molecules, pH, and lipid bilayer architecture are all known to influence (pre)transition behavior. In particular, fatty acid chains interact with hydrophobic lipid tails, while the carboxylic groups simultaneously participate in proton transfer with interfacial water in the polar lipid region which is controlled by the pH of the surrounding aqueous medium. The molecular-level variations in the DPPC ripple phase in the presence of 2% palmitic acid (PA) were studied at pH levels 4.0, 7.3, and 9.1, where PA is fully protonated, partially protonated, or fully deprotonated. Bilayer thermotropic behavior was investigated by differential scanning calorimetry (DSC) and Fourier-transform infrared (FTIR) spectroscopy which agreed in their characterization of (pre)transition at pH of 9.1, but not at pH 4.0 and especially not at 7.3. Owing to the different insertion depths of protonated and deprotonated PA, along with the ability of protonated PA to undergo flip-flop in the bilayer, these two forms of PA show a different hydration pattern in the interfacial water layer. Finally, these results demonstrated the hitherto undiscovered potential of FTIR spectroscopy in the detection of the events occurring at the surface of lipid bilayers that obscure the low-cooperativity phase transition explored in this work.

pH-dependent mechanisms of sulfadiazine degradation by natural pyrite-driven heterogeneous Fenton-like reactions.

The development of a natural pyrite/peroxymonosulfate (PMS) system for the removal of antibiotic contamination from water represented an economic and green sustainable strategy. Yet, a noteworthy knowledge gap remained considering the underlying reaction mechanism of the system, particularly in relation to its pH sensitivity. Herein, this paper investigated the impacts of critical reaction parameters and initial pH levels on the degradation of sulfadiazine (SDZ, 3 mg/L) in the pyrite/PMS system, and elucidated the pH dependence of the reaction mechanism. Results showed that under optimal conditions, SDZ could be completely degraded within 5 min at a broad pH range of 3.0-9.0, with a pseudo-first-order reaction rate of >1.0 min-1. The low or high PMS doses could lower degradation rates of SDZ through the decreased levels of active species, while the amount of pyrite was positively correlated with the removal rate of SDZ. The diminutive concentrations of anions exerted minor impacts on the decomposition of SDZ within the pyrite PMS system. Mechanistic results demonstrated that the augmentation of pH levels facilitated the transition from the non-radical to the radical pathway within the natural pyrite/PMS system, while concurrently amplifying the role of •OH in the degradation process of SDZ. This could be attributed to the change in interface electrostatic repulsion induced by pH fluctuations, as well as the mutual transformation between active species. The stable presence of the relative content of Fe(II) in the used pyrite was ensured owing to the reduced sulfur species acting as electron donors, providing the pyrite/PMS system excellent reusability. This paper sheds light on the mechanism regulation of efficient removal of organic pollutants through pyrite PMS systems, contributing to practical application.

Direct Phototransformation of Sulfamethoxazole Characterized by Four-Dimensional Element Compound Specific Isotope Analysis.

The antibiotic sulfamethoxazole (SMX) undergoes direct phototransformation by sunlight, constituting a notable dissipation process in the environment. SMX exists in both neutral and anionic forms, depending on the pH conditions. To discern the direct photodegradation of SMX at various pH levels and differentiate it from other transformation processes, we conducted phototransformation of SMX under simulated sunlight at pH 7 and 3, employing both transformation product (TP) and compound-specific stable isotope analyses. At pH 7, the primary TPs were sulfanilic acid and 3A5MI, followed by sulfanilamide and (5-methylisoxazol-3-yl)-sulfamate, whereas at pH 3, a photoisomer was the dominant product, followed by sulfanilic acid and 3A5MI. Isotope fractionation patterns revealed normal 13C, 34S, and inverse 15N isotope fractionation, which exhibited significant differences between pH 7 and 3. This indicates a pH-dependent transformation process in SMX direct phototransformation. The hydrogen isotopic composition of SMX remained stable during direct phototransformation at both pH levels. Moreover, there was no variation observed in 33S between the two pH levels, indicating that the 33S mass-independent process remains unaffected by changes in pH. The analysis of main TPs and single-element isotopic fractionation suggests varying combinations of bond cleavages at different pH values, resulting in distinct patterns of isotopic fractionation. Conversely, dual-element isotope values at different pH levels did not significantly differ, indicating cleavage of several bonds in parallel. Hence, prudent interpretation of dual-element isotope analysis in these systems is warranted. These findings highlight the potential of multielement compound-specific isotope analysis in characterizing pH-dependent direct phototransformation of SMX, thereby facilitating the evaluation of its natural attenuation through sunlight photolysis in the environment.

Teal-light absorbing cyanobacterial phytochrome superfamily provides insights into the diverse mechanisms of spectral tuning and facilitates the engineering of photoreceptors for optogenetic tools.

Cyanobacteriochromes (CBCRs) are distinctive tetrapyrrole (bilin)-binding photoreceptors exclusively found in cyanobacteria. Unlike canonical phytochromes, CBCRs require only a GAF (cGMP-phosphodiesterase/adenylate cyclase/FhlA) domain for autolyase activity to form a bilin adduct via a Cys residue and cis-trans photoisomerization. Apart from the canonical Cys, which attaches covalently to C31 in the A-ring of the bilin, some GAF domains of CBCRs contain a second-Cys in the Asp-Xaa-Cys-Phe (DXCF) motif, responsible for isomerization of phycocyanobilin (PCB) to phycoviolobilin (PVB) and/or for the formation of a reversible 2nd thioether linkage to the C10. Unlike green/teal-absorbing GAF proteins lacking ligation activity, the second-Cys in another teal-absorbing lineage (DXCF blue/teal group) exhibits both isomerization and ligation activity due to the presence of the Tyr instead of His next to the canonical Cys. Herein, we discovered an atypical CBCR GAF protein, Tpl7205g1, belonging to the DXCF blue/teal group, but having His instead of Tyr next to the first-Cys. Consistent with its subfamily, the second-Cys of Tpl7205g1 did not form a thioether linkage at C10 of PCB, showing only isomerization activity. Instead of forming 2nd thioether linkage, this novel GAF protein exhibits a pH-dependent photocycle between protonated 15Z and deprotonated 15E. Site-directed mutagenesis to the GAF scaffolds revealed its combined characteristics, including properties of teal-DXCF CBCRs and red/green-absorbing CBCRs (XRG CBCRs), suggesting itself as the evolutionary bridge between the two CBCR groups. Our study thus sheds light on the expanded spectral tuning characteristics of teal-light absorbing CBCRs and enhances feasibility of engineering these photoreceptors.

New insights into the pH-dependent removal of sulfamethoxazole in peracetic acid activation systems: From mechanistic exploration to practical application potentials.

Peracetic acid (PAA) as emerging oxidant in advanced oxidation processes (AOPs) has attracted widespread attention in purifying water pollution. In this research, the removal of target contaminant (sulfamethoxazole, SMX) was investigated through PAA activation by a facile catalyst (Co@C), and the active sites of catalyst were identified as sp3-C, Oads, and Co0 by correlation analysis. Especially, different pH adjustment strategies were designed, including System A (adjusting pH after adding PAA) and System B (adjusting pH before adding PAA), to investigate the impact of oxidant acidity and alkalinity on solution microenvironment as well as effect and mechanism of pollutant removal. The results showed that HO· and CH3C(O)OO· dominated in System A, while Co(IV)O2+ was also observed in System B. Both systems showed optimal SMX degradation (98 %). However, System A exhibited excellent water quality tolerance (efficiency > 78 %), superior sustained catalyst activation (efficiency > 80 % in 40 h), less ion leaching (41 µg L-1), and lower products toxicity. Moreover, the pH of solution after reaction in System B was intensely acidic, requiring costly pH adjustments for discharge. This study unveils the strategy of adjusting pH after adding PAA is preferable for water purification, enriching the emerging research of PAA-based AOPs for the remediation of environments.

Development of interpenetrating network hydrogels: Enhancing the release and bioaccessibility of green tea polyphenols.

Green Tea polyphenols (GTP) are important bioactive compounds with excellent physiological regulation functions. However, they are easily destroyed by the gastric environment during digestion. In this work, a sodium alginate (SA)-gellan gum (GG) interpenetrating network (IPN) hydrogel was synthesized to protect and delivery GTP. The ratio of SA/GG significantly affects the network structure of IPN hydrogels and the performance of delivering GTP. The hydrogel formed by interpenetrating 20 % GG with 80 % SA as the main network had the highest water uptake (55 g/g), holding capacity (950 mg/g), and freeze-thaw stability, with springiness reaching 0.933 and hardness reaching 1300 g, which due to the filling effect and non-covalent interaction. Rheological tests showed that the crosslink density of IPN hydrogel in SA-dominated network was improved by the addition of GG to make it better bound to GTP, and the higher water uptake meant that the system could absorb more GTP-containing solution. This IPN hydrogel maintained 917.3 mg/g encapsulation efficiency at the highest loading capacity (1080 mg/g) in tests as delivery system. In in vitro digestion simulations, owing to the pH responsiveness, the IPN hydrogel reduced the loss of GTP in gastric fluid, achieving a bioaccessibility of 71.6 % in the intestinal tract.

Developing new Hydrazine Carbothioamide Molecules for Selective Colorimetric/Fluorometric Detection of Environmentally Essential Hg2+ and Ag+ Metal Ions in Mixed Aqueous Media.

A novel colorimetric and fluorogenic probe L based on hydrazine carbothioamide and 1,8-naphthalimide moieties has been designed and synthesized for the hypersensitive detection of Hg2+ or Ag+ ions. The observed probe L showed colorimetric and fluorometric responses for these studies when Hg2+ or Ag+ was added to the DMSO - HEPES buffer solution (pH = 7). An interference test with other metal ions was determined, and the high selectivity of Hg2+ and Ag+ did not interfere with other metal ions in colorimetric and fluorogenic methods. The possible mechanism of binding of these metal ions and the probe L 1:1 complex was determined by H1 NMR. Additionally, the reversibility of the affinity of probe L with mercury (Hg2+) and silver (Ag+) ions was investigated by adding Na2EDTA. The naked eye detected the "Off-On" type fluorescence sensor in the presence of Hg2+ and EDTA. The tested test strip kits provided a strong probability of probe L with high response and rapid, sensitive detection with Hg2+ ion, which may be suitable for practical use.

Nonlinearity and anthocyanin colour expression: A mathematical analysis of anthocyanin association kinetics and equilibria.

Anthocyanins are polyphenolic compounds that provide pigmentation in plants as reflected by pH-dependent structural transformations between the red flavylium cation, purple quinonoidal base, blue quinonoidal anion, colourless hemiketal, and pale yellow chalcone species. Thermodynamically stable conditions of hydrated plant cell vacuoles in vivo correspond to the colourless hemiketal, yet anthocyanin colour expression appears in an important variety of hues within plant organs such as flowers and fruit. Moreover, anthocyanin colour from grape berries is significant in red winemaking processes as it plays a crucial role in determining red wine quality. Here, nonlinear ordinary differential equations were developed to represent the evolution in concentration of various anthocyanin species in both monomeric (chemically reactive) and self-associated (temporally stable) forms for the first time, and simulations were verified experimentally. Results indicated that under hydrating conditions, anthocyanin pigmentation is preserved by self-association interactions, based on pigmented monomeric anthocyanins experiencing colour loss whereas colour-stable self-associated anthocyanins increase in concentration nonlinearly over time. In particular, self-association of the flavylium cation and the quinonoidal base was shown to influence colour expression and stability within Geranium sylvaticum flower petals and Vitis vinifera grape skins. This study ultimately characterises fundamental mechanisms of anthocyanin stabilisation and generates a quantitative framework for anthocyanin-containing systems.

Electrochemical detection of 4(5)-methylimidazole in aqueous solutions.

4(5)-methylimidazole (4-MeI) is a potential carcinogen widely used in food colours. EU regulations specify a maximum allowable concentration of 200 ppm for 4-MeI in caramel colours. This study reports an electrochemical determination technique for 4-MeI in caramel colours for the first time. The effect of pH and interference from air were studied to optimize the detection conditions on a glassy carbon electrode in aqueous alkaline solutions using square wave voltammetry (SWV) technique. The concentration of 4-MeI was quantitatively measured down to 10 µM (∼0.8 ppm). Traditional methods such as HPLC, GC, spectrometry and immunoassays involve either expensive instrumentation and reagents or time consuming preparation and detection processes. This study demonstrates the possibility of rapid and simple electrochemical determination of (4-MeI) in food colours with minimum workup using a portable potentiostat.