Circularly Polarized Phosphorescence Energy Transfer Combined with Chirality-Selective Absorption for Modulating Full-Color and White Circularly Polarized Long Afterglow.

Circularly polarized long afterglow (CPLA) attracts great interests in multi-disciplinary fields with significant potentials in optical multiplexing applications, but achieving full-color and white CPLA is still challenging. The present contribution reports the first success in utilizing circularly polarized phosphorescence energy transfer (CPP-ET) combined with chirality-selective absorption (CSA) to construct full-color and white CPLA materials. Blue CPLA with luminescence dissymmetry factor (glum) of 3×10-2 is firstly obtained via the CSA effect of chiral helical polyacetylene and blue ultralong afterglow of inorganic phosphor BP. Significantly, full-color and white CPLA films are prepared by simply blending different fluorophores into the blue-CPLA films via CPP-ET. Benefited from the persistent luminescence of BP, the lifetimes of the fluorophores increase from nanoseconds to minutes, and ultralong full-color CPLA emissions lasting for more than 20 min are realized with glum of 10-3. Also noticeably, chiral optoelectronic devices, multi-dimension information encryption and chiral logic gate are developed based on the full-color tunable CPLA-active materials. The established strategy provides a universal platform for future development of CPLA-active materials with great applications.

Encapsulation of InP/ZnS Quantum Dots into MOF-5 Matrices for Solid-State Luminescence: Ship in the Bottle and Bottle around the Ship Methodologies.

The utilization of InP-based quantum dots (QDs) as alternative luminescent nanoparticles to cadmium-based QDs is actively pursued. However, leveraging their luminescence for solid-state applications presents challenges due to the sensitivity of InP QDs to oxidation and aggregation-caused quenching. Hence, an appealing strategy is to protect and disperse InP QDs within hybrid materials. Metal-organic frameworks (MOFs) offer a promising solution as readily available crystalline porous materials. Among these, MOF-5 (composed of {Zn4O}6+ nodes and terephthalate struts) can be synthesized under mild conditions (at room temperature and basic pH), making it compatible with InP QDs. In the present work, luminescent InP/ZnS QDs are successfully incorporated within MOF-5 by two distinct methods. In the bottle around the ship (BAS) approach, the MOF was synthesized around the QDs. Alternatively, in the ship in the bottle (SIB) strategy, the QDs were embedded via capillarity into a specially engineered, more porous variant of MOF-5. Comparative analysis of the BAS and SIB approaches, evaluating factors such as operational simplicity, photoluminescence properties, and the resistance of the final materials to leaching were carried out. This comparative study provides insights into the efficacy of these strategies for the integration of InP/ZnS QDs within MOF-5 for potential solid-state applications in materials chemistry.

Synthesis of Up-Conversion CaTiO3: Er3+ Films on Titanium by Anodization and Hydrothermal Method for Biomedical Applications.

The present study investigates the effects of Er3+ doping content on the microstructure and up-conversion emission properties of CaTiO3: Er3+ phosphors as a potential material in biomedical applications. The CaTiO3: x%Er3+ (x = 0.5, 1.0, 1.5, 2.0, 2.5, and 3.0%) films were synthesized on Ti substrates by a hydrothermal reaction at 200 °C for 24 h. The SEM image showed the formation of cubic nanorod CaTiO3: Er3+ films with a mean edge size value of (1-5) µm. When excited with 980 nm light, the CaTiO3: Er3+ films emitted a strong green band and a weak red band of Er3+ ions located at 543, 661, and 740 nm. The CaTiO3: Er3+ film exhibited excellent surface hydrophilicity with a contact angle of ~zero and good biocompatibility against baby hamster kidney (BHK) cells. CaTiO3: Er3+ films emerge as promising materials for different applications in the biomedical field.

LiAlO2:Gd-Based Versatile and Ultrasensitive Detector for Gamma and Neutrons by Thermal and Optical Stimulation.

Considering the low-level dose detection requirement for neutron and γ radiation in cancer therapy, synthesis and exploratory studies have been performed on a newly developed phosphor LiAlO2:Gd. Our results reveal that the presence of both Li and Gd makes it sensitive to both gamma and thermal neutrons. The applicability of LiAlO2:Gd for beta, gamma, and neutrons in both thermally stimulated and optically stimulated modes has been verified by extensive experiments followed by kinetic parametric evaluation with theoretical calculations. The current work confirms that LiAlO2:Gd is a highly sensitive phosphor with a minimum detectable dose of 5.7 µSv for gamma and 92 µSv for themral neutrons. The phosphor is found to show very high sensitivity at low energy and dose. Its ability for detection and discrimination of both gamma and thermal neutrons makes it a potential material to be used in medical dosimetry.

A Lu3Sc2Ga3O12: Eu3+ red-emitting phosphor with excellent optical properties and thermal stability was obtained by partially replacing Lu3+ with Gd3+ / Y3.

A novel red phosphor Lu3(1-x)Sc2Ga3O12: xEu3+(0 ≤ x ≤ 0.3) was successfully prepared by high temperature solid state method. The Lu2.4Sc2Ga3O12: 0.2Eu3+ phosphor shows strong high internal quantum efficiency and thermal stability with values of 64.79 % and 87.0 %, respectively. Based on Lu2.4Sc2Ga3O12: 0.2Eu3+ phosphor, the partial replacement of Lu3+ ions in the host by Gd3+ / Y3+ ions changes the local crystal field environment of Eu3+ ions, resulting in wonderful changes in the luminous center, and the luminous intensity at 593 nm is increased by 3.66 and 3.54 times, respectively. The decay time of Eu3+ ions is analyzed from the perspective of dynamics, and the reasons for the enhancement of luminescence after partial replacement of Lu3+ ions are discussed in detail from two aspects of phosphor structure and crystal field effect around Eu3+ ions. In addition, with the substitution of Gd3+ / Y3+ ions, the thermal stability of the sample is 90.3 %/89.4 % with excellent low thermal quenching. The thermal quenching mechanism is described by combining Debye temperature and activation energy. The sample also has a high internal quantum efficiency IQE=79.03 % / 78.24 %. Finally, under the excitation of 365 nm chip, the phosphors of Lu2.34Sc2Ga3O12: 0.2Eu3+, 0.02Gd3+ and Lu2.34Sc2Ga3O12: 0.2Eu3+, 0.02Y3+ synthesized R-LED device has extremely high color rendering index, Ra is 78.23/77.15 and color temperature is 1640.38 K/1642.97 K. The experimental results show that the Lu2.34Sc2Ga3O12: 0.2Eu3+, 0.02Gd3+ / Y3+ phosphors prepared has a wide application prospect in w-LED devices.

Adjusting luminescence properties of ZnAl2O4:Mn2+(Mn4+), Li+ phosphors through cation substitution.

ZnAl2O4 with a typical spinel structure is highly expected to be a novel rare-earth-free ion-activated oxide phosphor with red emission, which holds high actual meaning for advancing phosphor-converted light-emitting diode (pc-LED) lighting. Among the rare-earth-free activators, Mn4+ ions have emerged as one of the most promising activators. Considering the price advantage of MnCO3 generating Mn2+ ions and the charge compensation effect potentially obtaining Mn4+ ions from Mn2+ ions, this research delves into a collection of ZnAl2O4:Mn2+(Mn4+), x Li+ (x = 0%-40%) phosphors with Li+ as co-dopant and MnCO3 as Mn2+ dopant source prepared by a high temperature solid-state reaction method. The lattice structure was investigated using X-ray diffraction (XRD), photoluminescence (PL), and photoluminescence excitation (PLE) spectroscopy. Results suggest a relatively high probability of Li+ ions occupying Zn2+ lattice sites. Furthermore, Li+ ion doping was assuredly found to facilitate the oxidization of Mn2+ to Mn4+, leading to a shift of luminescence peak from 516 to 656 nm. An intriguing phenomenon that the emission color changed with the Li+ doping content was also observed. Meanwhile, the luminescence intensity and quantum yield (QY) at different temperatures, as well as the relevant thermal quenching mechanism, were determined and elucidated detailedly.

Site occupancy and tunable luminescence of Eu2+ and Eu3+ coactivated KCaY (PO4)2:Eu phosphors.

Utilizing the structure characteristic of KCaY (PO4)2 crystal, the site distribution of Eu2+ in KCaY (PO4)2:Eu phosphor coactivated with Eu2+ and Eu3+ ions is tuned. Upon 393-nm excitation, the as-prepared phosphor exhibits a broadband emission of Eu2+ peaked at ~ 475 nm and a typical red emission of Eu3+ with a strong 5D0-7F1 emission at ~ 591 nm. The luminescence color of the phosphor can be adjusted from blue to green, white, yellow, and red. The increasing concentration of Sr2+ and Eu2+ results in a blue shifting of Eu2+ emission. The increasing concentration of Eu3+ results in a red shifting of Eu2+ emission and an enhanced red emission of Eu3+. The luminescence behaviors of the phosphors are analyzed in terms of the site distribution of Eu2+ and Eu3+. A single-phase white light emitting was achieved in KCaY (PO4)2:Eu phosphor upon UV and NUV light excitation, indicating that the phosphor has potential application in white lighting.

Efficient Energy Transfer for Near-Perfect Quantum Efficiency and Thermal Stability.

The pursuit of high-quality phosphors exhibiting swift response to near-ultraviolet (n-UV) excitation, elevated quantum efficiency (QE), superior thermal stability, and impeccable light quality has been a focal point of investigation. In this research, we synthesized a novel K2La2B2O7:Ce3+,Tb3+ (KLBO:Ce3+,Tb3+) color-tunable phosphor that meets these requirements. KLBO:Ce3+ can be stimulated efficiently by the n-UV light and shows an intense blue emission centered at 437 nm. Notably, KLBO:0.04Ce3+ exhibits exceptional internal QE (IQE = 94%) and outstanding thermal stability (I423 K/I303 K = 88%). Optimization of doping compositions enables efficient Ce3+ → Tb3+ energy transfer, resulting in substantial enhancements in QE and thermal stability. Specifically, KLBO:0.04Ce3+,0.28Tb3+ achieves an IQE of 98% and a thermal stability of 97%, higher than those of most phosphors of the same type. White light-emitting diodes fabricated using phosphor samples emit warm white light characterized by high Ra (Ra = 96.6 and 93.4) and low CCT (CCT = 4886 and 4400 K). This study underscores the feasibility of enhancing phosphor QE and thermal stability through energy transfer mechanisms.

Multifunctional Phosphor with High-Efficient Near-Infrared Emission Based on Antimony-Zinc Halides.

Metal halide-based broadband near-infrared (NIR) luminescent materials face problems such as complicated preparation, high cost, low photoluminescence quantum yield, and high excitation energy. Here, incorporating Sb3+ and Br- into (C20H20P)2ZnCl4 crystals allowed for the achievement of efficient broadband near-infrared emission under 400 nm excitation while maintaining satisfactory environmental and thermal stability. The compounds exhibit a broad range of emission bands from 550 to 1050 nm, with a photoluminescence quantum yield of 93.57%. This is a groundbreaking achievement for organic-inorganic hybrid metal halide NIR luminescent materials. The near-infrared emission is suggested to originate from [SbX5]2-, as supported by the femtosecond transient absorption spectra and density-functional theory calculations. This phosphor-based NIR LEDs successfully demonstrate potential applications in night vision, medical imaging, information encryption, and anticounterfeiting.

Extraction of rare earth Eu from waste blue phosphor strengthened by microwave alkali roasting.

Spent phosphor is an important secondary resource for extracting rare earth elements. Microwave absorption properties and enhanced extraction of Eu from blue phosphor by microwave alkali roasting were studied. Dielectric properties of alkali roasting system were measured by resonator perturbation method. Dielectric constant increases linearly from 250 °C until it reaches a peak at 400 °C. The dielectric loss reaches a higher value at 400-550 °C, due to the strong microwave absorption properties of molten alkali and roasted products. Effects of roasting temperature, roasting time and alkali addition amount on Eu leaching were investigated. The phosphor was completely decomposed into Eu2O3, BaCO3 and MgO at 400 °C. The alkaline decomposition process of phosphor is more consistent with diffusion control model with Eα being 28.9 kJ/mol. Effects of the main leaching conditions on Eu leaching were investigated. The leaching kinetic of Eu was in line with diffusion control model with Eα being 5.74 kJ/mol. The leaching rules of rare earths in the mixed phosphor were studied. The results showed that the presence of red and green phosphor affected the recovery of blue phosphor. The optimum process parameters of rare earth recovery in single blue phosphor and mixed phosphor were obtained, and the recovery of Eu were 97.81% and 94.80%, respectively. Microwave alkali roasting promoted the dissociation of phosphor and leaching of rare earths. The results can provide reference for the efficient and selective recovery of rare earths in phosphors.

A Novel PiGF@Diamond Color Converter with a Record Thermal Conductivity for Laser-Driven Projection Display.

High-brightness laser lighting is confronted with crucial challenges in developing laser-excitable color converting materials with effective heat dissipation and super optical performance. Herein, a novel composite of phosphor-in-glass film on transparent diamond (PiGF@diamond) is designed and fabricated via a facile low-temperature co-sintering strategy. The as-prepared La3Si6N11:Ce3+ (LSN:Ce) PiGF@diamond with well-retained optical properties of raw phosphor shows a record thermal conductivity of ≈599 W m-1 K-1, which is about 60 times higher than that of currently well-used PiGF@sapphire (≈10 W m-1 K-1). As a consequence, this color converter can bear laser power density up to 40.24 W mm-2 and a maximum luminance flux of 5602 lm without luminescence saturation due to efficient inhibition of laser-induced heat accumulation. By further supplementing red spectral component of CaAlSiN3:Eu2+ (CASN:Eu), the PiGF@diamond based white laser diode is successfully constructed, which can yield warm white light with a high color rendering index of 89.3 and find practical LD-driven applications. The findings will pave the way for realizing the commercial application of PiGF composite in laser lighting and display.

Photoluminescence Spectra Correlations with Structural Distortion in Eu3+- and Ce3+-Doped Y3Al5-2x(Mg,Ge)xO12 (x = 0, 1, 2) Garnet Phosphors.

Garnet-type materials consisting of Y3Al5-2x(Mg,Ge)xO12 (x = 0, 1, 2), combined with Eu3+ or Ce3+ activator ions, were prepared by a solid-state method to determine the structural and optical correlations. The structure of Y3Al5-2x(Mg,Ge)xO12 (x = 1, 2) was determined to be a cubic unit cell (Ia-3d), which contains an 8-coordinated Y3+ site with octahedral (Mg,Al)O6 and tetrahedral (Al,Ge)O4 polyhedra, using synchrotron powder X-ray diffraction. When Eu3+ or Ce3+ ions were substituted for the Y3+ site in the Y3Al5-2x(Mg,Ge)xO12 host lattices, the emission spectra showed a decrease in the magnetic dipole f-f Eu3+ transition and a redshift of the d-f Ce3+ transition, related to centrosymmetry and crystal field splitting, respectively. These changes were monitored according to the increase in Mg2+ and Ge4+ contents. The dodecahedral and octahedral edge sharing was identified as a key distortion factor for the structure-correlated luminescence in the Eu3+/Ce3+-doped Y3Al5-2x(Mg,Ge)xO12 garnet phosphors.

Fe3+-activated magnetoplumbite persistent luminescence phosphor by modulating the oxygen vacancy.

Broadband near-infrared (NIR) spectroscopy has gained significant attention due to its versatile application in various fields. In the realm of NIR phosphors, Fe3+ ion is an excellent activator known for its nontoxic and harmless nature. In this study, we prepared an Fe3+-activated SrGa12O19 (SGO) NIR phosphor and analyzed its phase and luminescence properties. Upon excitation at 326 nm, the SGO:Fe3+ phosphor exhibited a broadband emission in the range 700-1000 nm, peaking at 816 nm. The optical band gap of SGO:Fe3+ was evaluated. To enhance the long-lasting phosphorescence, an oxygen vacancy-rich SGO:Fe3+ (VO-SGO:Fe3+) sample was prepared for activation. Interestingly, the increase in the oxygen-vacancy concentration indeed contributed to the activation of persistent luminescence of Fe3+ ions. The VO-SGO:Fe3+ sample has a long duration and high charge storage capacity, allowing it to perform efficiently in various applications. This work provides the foundation for further design of Cr3+-free PersL phosphors with efficient NIR PersL.

Demystification of luminescence properties and the near imperceptible thermal quenching of Sm3+-doped tungstate phosphors.

Ultra-high thermally stable Ca2MgWO6:xSm3+ (x = 0.5, 0.75, 1, 1.25, and 1.5 mol%) double perovskite phosphors were synthesized through solid-state reaction method. Product formation was confirmed by comparing the X-ray diffraction (XRD) patterns of the phosphors with the standard reference file. The structural, morphological, thermal, and optical properties of the prepared phosphor were examined in detail using XRD, Fourier transform infrared spectra, scanning electron microscopy, diffused reflectance spectra, thermogravimetric analysis (TGA), photoluminescence emission, and temperature-dependent PLE (TDPL). It was seen that the phosphor exhibited emission in the reddish region for the near-ultraviolet excitation with moderate Colour Rendering Index values and high colour purity. The optimized phosphor (x = 1.25 mol%) was found to possess a direct optical band gap of 3.31 eV. TGA studies showed the astonishing thermal stability of the optimized phosphor. Additionally, near-zero thermal quenching was seen in TDPL due to elevated phonon-assisted radiative transition. Furthermore, the anti-Stokes and Stokes emission peaks were found to be sensitive toward the temperature change and followed a Boltzmann-type distribution. All these marked properties will make the prepared phosphors a suitable candidate for multifield applications and a fascinating material for further development.

Modulation and Enhancement of Red Luminescence in Ca2GdSbO6: Eu3+ Phosphor by Co-Doping with Bi3.

The double perovskite structure of Ca2GdSbO6 as a fluorescent phosphor matrix material possesses a stable structure, making it an excellent candidate for a matrix material. In this study, single-doped Ca2GdSbO6: Eu3+ fluorescent phosphors and Bi3+ sensitized Ca2GdSbO6: Eu3+, Bi3+ fluorescent phosphor materials were synthesized using the high-temperature solid-state method. The luminescence of this phosphor is based on the 5D0→4F2 transition emission of Eu3+ ions, which occurs at 612 nm. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence (PL) spectra, high-temperature fluorescence spectra, and fluorescence decay lifetimes to study the phase structure, optical properties, crystal structure, and chemical purity of the samples. The performance of the single-doped phosphor was significantly improved by the addition of Bi3+ sensitizer. The luminescence intensity increased by nearly 100% compared to Ca2GdSbO6: Eu3+ phosphor, with a quantum efficiency increase of 124%. The thermal quenching activation energy was found to be 0.299 eV, and the luminescence intensity remained at 70.3% of room temperature at 453 K. These results indicate that the co-doping of Bi3+ has a modulation and enhancement effect on the luminescence of Ca2GdSbO6: Eu3+ red phosphor, showing great potential for application in near-ultraviolet-excited white LED devices.

Luminescence and Energy Transfer Properties of Color-Tunable Dy3+, Eu3+ co-Activated NaGdSiO4 Phosphor for WLED with Great Thermo-Stability.

A series of NaGd1-x-ySiO4: y Dy3+-x Eu3+ phosphors were synthesized by a high-temperature solid-phase method. The optimal doping ion concentration of Dy3+ ions for this phosphor was determined to be 1 % from the emission spectra. The energy transfer between Dy3+ and Eu3+ ions at 351 nm was investigated by photoluminescence spectra and fluorescence decay curves. At the excitation wavelengths of 275 nm, 351 nm, 366 nm, and 394 nm, a change from yellow to white to red light can be realized by adjusting the doping concentration of Eu/Dy ions. Particularly, by testing the temperature-dependent fluorescence spectrum of the phosphor, it can be found that the luminous intensity of the phosphor is as high as 96 % when 394 nm excitation is employed at 413 K. It was the maximum at this temperature comparing with other phosphors as far as we know. The color coordinate values show that the NaGd1-x-ySiO4:×Dy3+-y Eu3+ phosphors are very close to the white light color coordinates (x=0.33, y=0.33) under 351 nm excitation. Meanwhile, the correlated color temperature is between 5062-7104 K. These results indicate that this phosphor is a promising candidate for high-quality WLED.

Spinel-Based ZnAl2O4: 0.5%Cr3+ Red Phosphor Ceramics for WLED.

To address the issue of the lack of red light in traditional Ce3+: YAG-encapsulated blue LED white light systems, we utilized spark plasma sintering (SPS) to prepare spinel-based Cr3+-doped red phosphor ceramics. Through phase and spectral analysis, the SPS-sintered ZnAl2O4: 0.5%Cr3+ phosphor ceramic exhibits good density, and Cr3+ is incorporated into [AlO6] octahedra as a red emitting center. We analyzed the reasons behind the narrow-band emission and millisecond-level lifetime of ZAO: 0.5%Cr3+, attributing it to the four-quadrupole interaction mechanism as determined through concentration quenching modeling. Additionally, we evaluated the thermal conductivity and thermal quenching performance of the ceramic. The weak electron-phonon coupling (EPC) effects and emission from antisite defects at 699 nm provide positive assistance in thermal quenching. At a high temperature of 150 °C, the thermal conductivity reaches up to 14 W·m-1·K-1, and the 687 nm PL intensity is maintained at around 70% of room temperature. Furthermore, the internal quantum efficiency (IQE) of ZAO: 0.5%Cr3+ phosphor ceramic can reach 78%. When encapsulated with Ce3+: YAG for a 450 nm blue LED, it compensates for the lack of red light, adjusts the color temperature, and improves the color rendering index (R9). This provides valuable insights for the study of white light emitting diodes (WLEDs).

Novel green/red oxyfluoride phosphors with excellent optical properties for near-UV excited white light emitting diode.

Novel eye-sensitive Ba3Nb2O2F12(H2O)2:Tb3+ green and Ba3Nb2O2F12(H2O)2:Mn4+ red oxyfluoride phosphors with extremely strong absorption in the UV region were designed and synthesized by simple co-precipitation strategy. Particularly, Tb3+ ions were doped in this matrix for the first time, which greatly improves their absorption efficiency in the near ultraviolet region (367 nm) and emits sharp green light (544 nm). In addition, the Ba3Nb2O2F12(H2O)2:Mn4+ red phosphors have strong zero phonon line (ZPL) emission at 625 nm, which is conducive to improving the sensitivity of human eye and color purity. Meanwhile, the optical properties of the red phosphor are significantly enhanced via doping K+ cations as charge compensators. Crystal field environment and nephelauxetic effect of the as-prepared phosphors before and after K+ cation doping were systematically analyzed. Moreover, these synthesized red/green phosphors have good thermal stability and moisture resistance. Remarkably, the as-prepared Ba3Nb2O2F12(H2O)2:5%Mn4+ or K0.9Ba2.1Nb2O2F12(H2O)2:5%Mn4+ red phosphors can be directly mixed with the as-synthesized Ba3Nb2O2F12(H2O)2:13%Tb3+ green phosphor coating on 365 nm near-ultraviolet LED chip to package WLED devices with excellent electroluminescence performance. These findings are conducive to opening an avenue for screening the unique structure of optical materials.

Photoluminescence properties of Pb5(PO4)3Br:RE (RE = Dy3+, Eu3+ and Tb3+) phosphor synthesised using solid-state method.

This study describes the luminous properties of Pb5(PO4)3Br doped with RE3+ (RE = Dy3+, Eu3+ and Tb3+) synthesised using the solid-state method. The synthesised phosphor was characterised using Fourier-transform infrared, X-ray diffraction, scanning electron microscopy and photoluminescence measurements. Dy3+-doped Pb5(PO4)3Br phosphor exhibited blue and yellow emissions at 480 and 573 nm, respectively, on excitation at 388 nm. Eu3+-doped Pb5(PO4)3Br phosphor exhibited orange and red emissions at 591 and 614 nm, respectively, on excitation at λex = 396 nm. Pb5(PO4)3Br:Tb3+ phosphor exhibited the strongest green emission at 547 nm on excitation at λex = 380 nm. Additionally, the effect of the concentration of rare-earth ions on the emission intensity of Pb5(PO4)3Br:RE3+ (RE3+ = Dy3+, Eu3+ and Tb3+) phosphors was investigated.

Green- and Blue-Emitting Tb3+-Activated Linde Type A Zeolite-Derived Boro-Aluminosilicate Glass for Deep UV Detection/Imaging.

Tb3+-activated LTA zeolite-derived boro-aluminosilicate glass samples with a composition of xTb2O3-68(Na2O-Al2O3-SiO2)-32B2O3 (x = 0.2, 1.0 and 10 extra wt%) were prepared using the melt-quenching method. The emission spectra recorded upon ultraviolet (UV) excitation with two different wavelengths of 193 and 378 nm showed blue light (5D3 to 7FJ=6,5,4 and 5D4 to 7F6 transitions of Tb3+) and green light (5D4 to 7F5 transition of Tb3+) emissions with comparable intensities up to a Tb3+ concentration of 10 extra wt%. Of note, the mean decay times of the green luminescence of the glass samples were relatively fast (<20 µs). The synthesized glass has potential in applications concerning UV imaging, UV detection, and plasma display panels.