Dual Chemotherapeutic Loading in Oxalate Transferrin-Conjugated Polymersomes Incorporated into Chitosan Hydrogels for Site-Specific Targeting of Melanoma Cells.

In this work, we developed a smart drug delivery system composed of poly (ethylene glycol)-block-poly (ε-caprolactone) (PEG-PCL)-based polymersomes (Ps) loaded with doxorubicin (DOX) and vemurafenib (VEM). To enhance targeted delivery to malignant melanoma cells, these drug-loaded nanovesicles were conjugated to the oxalate transferrin variant (oxalate Tf) and incorporated into three-dimensional chitosan hydrogels. This innovative approach represents the first application of oxalate Tf for the precision delivery of drug-loaded polymersomes within a semi-solid dosage form based on chitosan hydrogels. These resulting semi-solids exhibited a sustained release profile for both encapsulated drugs. To evaluate their potency, we compared the cytotoxicity of native Tf-Ps with oxalate Tf-Ps. Notably, the oxalate Tf-Ps demonstrated a 3-fold decrease in cell viability against melanoma cells compared to normal cells and were 1.6-fold more potent than native Tf-Ps, indicating the greater potency of this nanoformulation. These findings suggest that dual-drug delivery using an oxalate-Tf-targeting ligand significantly enhances the drug delivery efficiency of Tf-conjugated nanovesicles and offers a promising strategy to overcome the challenge of multidrug resistance in melanoma therapy.

Evaluation of polymersome permeability as a fundamental aspect towards the development of artificial cells and nanofactories.

Polymersomes are synthetic vesicles with potential use in healthcare, chemical transformations in confined environment (nanofactories), and in the construction of artificial cells and organelles. In this framework, one of the most important features of such supramolecular structures is the permeability behavior allowing for selective control of mass exchange between the inner and outer compartments. The use of biological and synthetic nanopores in this regard is the most common strategy to impart permeability nevertheless, this typically requires fairly complex strategies to enable porosity. Yet, investigations concerning the permeability of polymer vesicles to different analytes still requires further exploration and, taking these considerations into account, we have detailed investigated the permeability behavior of a variety of polymersomes with regard to different analytes (water, protons, and rhodamine B) which were selected as models for solvents, ions, and small molecules. Polymersomes based on hydrophilic blocks of poly[N-(2-hydroxypropyl)methacrylamide] (PHPMA) or PEO (poly(ethylene oxide)) linked to the non-responsive blocks poly[N-(4-isopropylphenylacetamide)ethyl methacrylate] (PPPhA) or poly(methyl methacrylate) (PMMA), or to the stimuli pH-responsive block poly[2-(diisopropylamino)ethyl methacrylate] (PDPA) have been investigated. Interestingly, the produced PEO-based vesicles are notably larger than the ones produced using PHPMA-containing block copolymers. The experimental results reveal that all the vesicles are inherently permeable to some extent with permeability behavior following exponential profiles. Nevertheless, polymersomes based on PMMA as the hydrophobic component were demonstrated to be the least permeable to the small molecule rhodamine B as well as to water. The synthetic vesicles based on the pH-responsive PDPA block exhibited restrictive and notably slow proton permeability as attributed to partial chain protonation upon acidification of the medium. The dye permeability was evidenced to be much slower than ion or solvent diffusion, and in the case of pH-responsive assemblies, it was demonstrated to also depend on the ionic strength of the environment. These findings are understood to be highly relevant towards polymer selection for the production of synthetic vesicles with selective and time-dependent permeability, and it may thus contribute in advancing biomimicry and nanomedicine.

Polymersomes for protein drug delivery across intestinal mucosa.

The oral administration is the route preferred by patients due to its multiple advantages. In the case of biopharmaceuticals, due to their low stability and absorption in the intestine, these molecules must be administered by injectable routes. To circumvent these problems, several strategies have been studied, among which the use of nanosystems, such as polymersomes, can be highlighted. In this work the potential of poloxamer 401 polymersomes as a system for oral delivery of antibodies was evaluated. IgG-FITC-loaded poloxamer 401 polymerosomes were initially used to assess whether it improves intestinal epithelial permeation in Caco-2 cell monolayers. Subsequently, epithelial/macrophage co-culture model was used to evaluate the ability of poloxamer 401 polymersomes containing adalimumab to reduce proinflammatory cytokine levels. The data showed that polymersome-encapsulated IgG increased the transport across intestinal Caco-2 monolayers 2.7-fold compared to the antibody in solution. Also, when comparing the groups of blank polymersomes with polymersomes containing adalimumab, decreases of 1.5-, 5.5-, and 2.4-fold in TNF-α concentrations were observed for the polymersomes containing 1.5, 3.75, and 15 µg/mL of adalimumab, respectively. This could indicate a possibility for the oral administration of biopharmaceuticals which would revolutionize many conditions that require the systemic administration such as in inflammatory bowel disease.

Tuning the morphology of block copolymer-based pH-triggered nanoplatforms as driven by changes in molecular weight and protocol of manufacturing.

The ability to tune size and morphology of self-assemblies is particularly relevant in the development of delivery systems. By tailoring such structural parameters, one can provide larger cargo spaces or produce nanocarriers that can be loaded by hydrophilic and hydrophobic molecules starting ideally from the same polymer building unit. We herein demonstrate that the morphology of block copolymer-based pH-triggered nanoplatforms produced from poly(2-methyl-2-oxazoline)m-b-poly[2-(diisopropylamino)-ethyl methacrylate]n (PMeOxm-b-PDPAn) is remarkably influenced by the overall molecular weight of the block copolymer, and by the selected method used to produce the self-assemblies. Polymeric vesicles were produced by nanoprecipitation using a block copolymer of relatively low molecular weight (Mn âˆ¼ 10 kg.mol-1). Very exciting though, despite the high hydrophobic weight ratio (wPDPA > 0.70), this method conducted to the formation of core-shell nanoparticles when block copolymers of higher molecular weight were used, thus suggesting that the fast (few seconds) self-assembly procedure is controlled by kinetics rather than thermodynamics. We further demonstrated the formation of vesicular structures using longer chains via the solvent-switch approach when the "switching" to the bad solvent is performed in a time scale of a few hours (approximately 3 hs). We accordingly demonstrate that using fairly simple methods one can easily tailor the morphology of such block copolymer self-assemblies, thereby producing a variety of structurally different pH-triggered nanoplatforms via a kinetic or thermodynamically-controlled process. This is certainly attractive towards the development of nanotechnology-based cargo delivery systems.

Challenges in estimating the encapsulation efficiency of proteins in polymersomes - Which is the best method?

Abstract Polymersomes are nanometric vesicles that can encapsulate large and hydrophilic biomolecules, such as proteins, in the aqueous core. Data in literature show large variation in encapsulation efficiency (%EE) values depending on the method used for calculation. We investigated different approaches (direct and indirect) to quantify the %EE of different proteins (catalase, bovine serum albumin-BSA, L-asparaginase and lysozyme) in Pluronic L-121 polymersomes. Direct methods allow quantification of the actual payload of the polymersomes and indirect methods are based on the quantification of the remaining non-encapsulated protein. The protein-loaded polymersomes produced presented approximately 152 nm of diameter (PDI ~ 0.4). Higher %EE values were obtained with the indirect method (up to 25%), attributed to partial entanglement of free protein in the polymersomes poly(Ethylene Glycol) corona. For the direct methods, vesicles were disrupted with chloroform or proteins precipitated with solvents. Reasonable agreement was found between the two protocols, with values up to 8%, 6%, 17.6% and 0.9% for catalase, BSA, L-asparaginase and lysozyme, respectively. We believe direct determination is the best alternative to quantify the %EE and the combination of both protocols would make results more reliable. Finally, no clear correlation was observed between protein size and encapsulation efficiency.

Light-Triggered Polymersome-Based Anticancer Therapeutics Delivery.

Polymersomes are biomimetic cell membrane-like model structures that are self-assembled stepwise from amphiphilic copolymers. These polymeric (nano)carriers have gained the scientific community's attention due to their biocompatibility, versatility, and higher stability than liposomes. Their tunable properties, such as composition, size, shape, and surface functional groups, extend encapsulation possibilities to either hydrophilic or hydrophobic cargoes (or both) and their site-specific delivery. Besides, polymersomes can disassemble in response to different stimuli, including light, for controlling the "on-demand" release of cargo that may also respond to light as photosensitizers and plasmonic nanostructures. Thus, polymersomes can be spatiotemporally stimulated by light of a wide wavelength range, whose exogenous response may activate light-stimulable moieties, enhance the drug efficacy, decrease side effects, and, thus, be broadly employed in photoinduced therapy. This review describes current light-responsive polymersomes evaluated for anticancer therapy. It includes light-activable moieties' features and polymersomes' composition and release behavior, focusing on recent advances and applications in cancer therapy, current trends, and photosensitive polymersomes' perspectives.

Reduced cytotoxicity of nanomaterials driven by nano-bio interactions: Case study of single protein coronas enveloping polymersomes.

The protein adsorption onto poly(acrylic acid)-block-polystyrene (PAA22-b-PS144) polymersomes has been investigated with regard to structural features, thermodynamic aspects and biological consequences. The light scattering measurements revealed the formation of protein coronas enveloping the polymeric capsules regardless of the chemical nature of the biomacromolecules. The experiments were conducted by using lysozyme, immunoglobulin G - IgG and bovine serum albumin - BSA as model proteins due to their differences concerning size and residual surface charge at physiological pH. The protein adsorption was further confirmed by isothermal titration calorimetry, and the experimental data suggest that the phenomenon is mainly governed by hydrogen bonding and van der Waals interactions. The pre-existing protein layer via the pre-incubation in protein environments notably attenuates the cytotoxicity of the nanomaterial compared to the pristine counterparts. This approach can possibly be extended to different types of assemblies when intermolecular interactions are able to induce protein adsorption and the development of protein coronas around nanoparticles. Such fairly simple method may be convenient to engineer safer nanomaterials towards a variety of biomedical applications when the nanotoxicity is an issue. Additionally, the strategy can possibly be used to tailor the surface properties of nanoparticles by adsorbing specific proteins for targeting purposes.

iRGD-guided tamoxifen polymersomes inhibit estrogen receptor transcriptional activity and decrease the number of breast cancer cells with self-renewing capacity.

BACKGROUND: Tamoxifen (Tam) is the most frequent treatment for estrogen receptor (ER) positive breast cancer. We recently showed that fibronectin (FN) leads to Tam resistance and selection of breast cancer stem cells. With the aim of developing a nanoformulation that would simultaneously tackle ER and FN/ß1 integrin interactions, we designed polyethylene glycol-polycaprolactone polymersomes polymersomes (PS) that carry Tam and are functionalized with the tumor-penetrating iRGD peptide (iRGD-PS-Tam). RESULTS: Polyethylene glycol-polycaprolactone PS were assembled and loaded with Tam using the hydration film method. The loading of encapsulated Tam, measured by UPLC, was 2.4 ± 0.5 mol Tam/mol polymer. Physicochemical characterization of the PS demonstrated that iRGD functionalization had no effect on morphology, and a minimal effect on the PS size and polydispersity (176 nm and Pdi 0.37 for iRGD-TAM-PS and 171 nm and Pdi 0.36 for TAM-PS). iRGD-PS-Tam were taken up by ER+ breast carcinoma cells in 2D-culture and exhibited increased penetration of 3D-spheroids. Treatment with iRGD-PS-Tam inhibited proliferation and sensitized cells cultured on FN to Tam. Mechanistically, treatment with iRGD-PS-Tam resulted in inhibition ER transcriptional activity as evaluated by a luciferase reporter assay. iRGD-PS-Tam reduced the number of cells with self-renewing capacity, a characteristic of breast cancer stem cells. In vivo, systemic iRGD-PS-Tam showed selective accumulation at the tumor site. CONCLUSIONS: Our study suggests iRGD-guided delivery of PS-Tam as a potential novel therapeutic strategy for the management of breast tumors that express high levels of FN. Future studies in pre-clinical in vivo models are warranted.

Quality-by-Design Approach for Biological API Encapsulation into Polymersomes Using "Off-the-Shelf" Materials: a Study on L-Asparaginase.

Polymersomes are versatile nanostructures for protein delivery with hydrophilic core suitable for large biomolecule encapsulation and protective stable corona. Nonetheless, pharmaceutical products based on polymersomes are not available in the market, yet. Here, using commercially available copolymers, we investigated the encapsulation of the active pharmaceutical ingredient (API) L-asparaginase, an enzyme used to treat acute lymphoblastic leukemia, in polymersomes through a quality-by-design (QbD) approach. This allows for streamlining of processes required for improved bioavailability and pharmaceutical activity. Polymersomes were prepared by bottom-up (temperature switch) and top-down (film hydration) methods employing the diblock copolymers poly(ethylene oxide)-poly(lactic acid) (PEG45-PLA69, PEG114-PLA153, and PEG114-PLA180) and the triblock Pluronic® L-121 (poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide), PEG5-PPO68-PEG5). Quality Target Product Profile (QTPP), Critical Quality Attributes (CQAs), Critical Process Parameters (CPPs), and the risk assessment were discussed for the early phase of polymersome development. An Ishikawa diagram was elaborated focusing on analytical methods, raw materials, and processes for polymersome preparation and L-asparaginase encapsulation. PEG-PLA resulted in diluted polymersomes systems. Nonetheless, a much higher yield of Pluronic® L-121 polymersomes of 200 nm were produced by temperature switch, reaching 5% encapsulation efficiency. Based on these results, a risk estimation matrix was created for an initial risk assessment, which can help in the future development of other polymersome systems with biological APIs nanoencapsulated.

Desenvolvimento de vesículas poliméricas de poli(etileno glicol)-b-poli(ε-caprolactona) (PEG-PCL) para veiculação de L-asparaginase / Development of polyethylene glycol-polycaprolactone polymer vesicles for L-Asparaginase

A L-Asparaginase (ASNase) é um importante agente quimioterapêutico utilizado para o tratamento da leucemia linfoblástica aguda (ALL) há mais de 40 anos. No entanto, devido à origem biológica da ASNase, enzima produzida por Escherichia coli, problemas como a imunogenicidade e baixa meia vida-plasmática devem ser considerados. Com o objetivo de minimizar essas desvantagens, várias ASNases homólogas bem como formulações de ASNase de E. coli foram investigadas. Nenhuma das formulações desenvolvidas, entretanto, foi capaz de resolver definitivamente esses problemas associados à sua origem. Nesse sentido, considerando os recentes avanços na ciência de polímeros com a possibilidade do obtenção de vesículas poliméricas usando copolímeros, este trabalho concentrou-se no desenvolvimento de polimerossomos de poli(etileno glicol)-b-poli(ε-caprolactona) (PEG-PCL) para encapsular a ASNase. Diversas condições experimentais foram investigadas e, ao final, os polimerossomos foram produzidos pela técnica de hidratação do filme polimérico utilizando a centrifugação como técnica de pós-filme para remoção de copolímero precipitado, produzindo assim vesículas polímericas de 120 a 200nm com PDI de aproximadamente 0,250. A eficiência de encapsulação da ASNase, utilizando as metodologias de centrifugação ou cromatografia de exclusão molecular, revelou taxas de encapsulação de 20-25% e 1 a 7%, repectivamente. Esses resultados apontam a importância de se determinar a eficiência de encapsulação por cromatografia de exclusão molecular ou método direto no caso de nanoestruturas auto-agregadas formadas por copolímeros, devido a valores superestimados com o emprego da centrifugação. Ainda que estudos complementares se façam necessários para liberação da enzima encapsulada ou penetração da L-asparagina nas vesículas, nossos resultados demonstram o potencial de polimerossomos para veiculação de ASNase, bem como de outras proteínas terapêuticas

L-Asparaginase (ASNase) is an important chemotherapeutic agent used for the treatment of acute lymphoblastic leukemia (ALL) for more than 40 years. However, due to the biological origin of ASNase (produced by Escherichia coli) some drawbacks such as immunogenicity and low plasma half life are present. In order to minimize the disadvantages, several ASNases proteoforms and formulations of E. coli ASNase were investigated. However, none of this formulations completely solved the main drawbacks of ASNase. In this sense, considering the recents advances in polymers science with the possibility to develop polymeric vesicles using copolymers, this work aimed at the development of poly(ethylene glycol)-b-poly(ε-caprolactone) (PEG-PCL) vesicles to encapsulate ASNase. Different experimental conditions were investigated and, the final polymersomes formulation was prepared by film hydratation using centrifugation as a post-film technique to remove the bulky coplymer. Polymeric vesicles of 120 to 200nm with PDI of approximately, 0.250 were obtained. The encapsulation efficiency of ASNase was determined indirectly by centrifugation and directly by size exclusion chromatography, resulting in encapsulation rates of 20-25% and 1 to 7%, respectively. These results indicate the importance of determining the efficiency of encapsulation by size exclusion chromatography or direct method in the case of self-aggregated nanostructures formed by copolymers, due to values overestimated with the use of centrifugation. Our results point to the potential of polymersomes for ASNase delivery, as well as other therapeutic proteins. Nonetheless, complimentary studies are still necessary for ASNase release or L-asparagine penetration into the vesicles

Desenvolvimento e caracterização de polimerossomos para veiculação de L-asparaginase / Development and characterization of polymersomes for the release of L-asparaginase

A enzima L-Asparaginase (ASNase) é um biofámaco utilizado no tratamento da leucemia linfoblástica aguda, no entanto, a evolução da produção da ASNase como um medicamento desde o final da década de 1970 resultou em apenas quatro alternativas disponíveis no mercado farmacêutico, com relatos de graves reações imunogênicas e toxicidade. Desse modo, a nanotecnologia é uma plataforma que pode ser explorada para administração dessa enzima diminuindo a exposição da mesma a proteases e aumentando a sua meia-vida aparente. Os polimerossomos (PL) são opções que pela nanoestrutura vesicular poderiam encapsular a ASNase em seu core aquoso e pela presença de uma membrana polimérica, são mais robustos que os lipossomos. Assim, neste trabalho objetivou-se desenvolver PL para encapsulação da ASNase como uma alternativa às formulações deste biofármaco existentes. Foram desenvolvidos PL de PEG-PLA, PMPC-PDPA, PEG-PDPA e Pluronic® L-21. Foram estudados fatores relacionados à composição dos copolímeros (fração hidrofílica, responsividade a fatores externos tais como pH e temperatura) e métodos de elaboração (hidratação do filme polimérico, troca de pH e temperatura) bem como foi feita a caracterização dos PL obtidos (tamanho, índice de polidispersão, espessura de membrana, formação de excessivo bulk polimérico, obtenção de micelas). Também foi feito um planejamento racional para encapsulação da ASNase (hidratação direta do filme polimérico e encapsulação por eletroporação, autoagregação com encapsulação por troca de pH ou de temperatura). Para os PL preparados com PEG-PLA, a extrusão resultou em distribuição de tamanhos mais estreitos correspondentes aos valores de PDI de 0,345, 0,144 e 0,081 para PEG45-PLA69, PEG114-PLA153 e PEG114-PLA180, respectivamente. Foi demonstrado que copolímeros com menor fração hidrofóbica resultam em maior eficiência de encapsulação para proteínas, já que possuem volumes aquosos maiores. Com o PMPC25-PDPA72 foi possível encapsular em média três unidades de ASNase por vesículas através da eletroporação ou troca de pH, sendo que no primeiro método houve formação de túbulos e no último método as micelas não foram completamente removidas. Para PEG100-PDPA80, grandes agregados permaneceram após a purificação levando a um PDI alto, mas não foi observada a formação de túbulos, já a troca de pH para este copolímero resultou em maior perda de copolímeros como bulk polimérico precipitado. Para o copolimero tribloco Pluronic® L-121, foi observado que as vesículas eram estáveis durante uma semana à temperatura ambiente, contrariando o que era descrito na literatura. Nesses sistemas, quando preparados por hidratação do filme, a encapsulação da ASNase foi realizada por eletroporação mas a proteína não foi detectada dentro das vesículas. Atribuímos a não-encapsulação à organização da bicamada Pluronic® L-121 sem conformação definida das cadeias poliméricas, dificultando a reorganização do bloco hidrofílico na porção interna do poro durante eletroporação. Por troca de temperatura, cerca de 5 % de ASNase foi encapsulada e o método resultou em total recuperação da atividade da enzima. Desse modo foram obtidos diferentes PL com diferentes características nanoestruturais de acordo com os copolímeros utilizados para carreamento da ASNase

The enzyme L-Asparaginase (ASNase) is a biopharmaceutical used in the treatment of acute lymphoblastic leukemia, still the industrial production of ASNase as a marketable drug since the late 1970s has resulted in only four alternatives available in the pharmaceutical market, with reports of severe immunogenic reactions and toxicity. In this sense, nanotechnology is a platform that can be exploited to administer this enzyme by decreasing its exposure to proteases and increasing its apparent half-life. Polymerosomes (PL) are interesting routes which by its intrinsically vesicular nanostructure could encapsulate the ASNase in its aqueous core and by the presence of a polymeric membrane, being more robust than the liposomes. Thus, in this work it was intended to develop PL for ASNase encapsulation as an alternative to existing formulations of this biopharmaceutical. PL of PEG-PLA, PMPC-PDPA, PEG-PDPA and Pluronic® L-21 were developed. It was studied the copolymers composition (i.e. hydrophilic fraction, responsiveness to external factors such as pH and temperature), PL design (i.e. polymer film hydration, pH change and temperature) and PL characterization (i.e. size, polydispersity index - PDI, membrane thickness, formation of excessive polymer bulk, micelles production). A suitable experimental planning for ASNase encapsulation (i.e. direct hydration of the polymeric film and encapsulation by electroporation, self-aggregation with encapsulation by pH or temperature change) was also performed. For the PL prepared with PEG-PLA, the extrusion resulted in narrower size distribution corresponding to the PDI values of 0.345, 0.144 and 0.081 for PEG45-PLA69, PEG114-PLA153 and PEG114-PLA180, respectively. It has been shown that copolymers with lower hydrophobic fraction result in higher encapsulation efficiency for proteins, since they have larger aqueous volumes. With PMPC25-PDPA72 PL, it was possible to encapsulate three units of ASNase per vesicles through electroporation or pH change. In the first method, tubules were formed and in the latter one the micelles were not completely removed. For PEO100-PDPA80 PL, large aggregates remained after purification leading to a high PDI value, nevertheless no tubule formation was observed, since the pH change for this copolymer resulted in greater loss of copolymers as a precipitated polymer bulk. For the Pluronic® L-121 triblock copolymer PL, it was observed that the vesicles were stable for one week at room temperature, contrary to what was described in the literature. These PLs were prepared by film hydration method and ASNase encapsulation was performed by electroporation, nonetheless the protein was not detected within the vesicles. It is attributed the non-encapsulation to the organization of the Pluronic® L-121 bilayer without defined conformation of the polymer chains, making it difficult to reorganize the hydrophilic block in the internal portion of the pore during electroporation. By temperature change, about 5% of ASNase was encapsulated and the method resulted in complete recovery of enzyme activity. In conclusion, several PLs with a vast range of differential nanostructural characteristics were obtained according to the copolymers used for ASNase loading

Layer-by-layer assembly of polymersomes and polyelectrolytes on planar surfaces and microsized colloidal particles.

Hybrid polyelectrolyte multilayer systems were fabricated on top of planar surfaces and colloidal particles via layer by layer (LbL) assembly of polystyrene sulphonate (PSS) and polybenzyl methacrylate-block-poly(dimethylamino)ethyl methacrylate (PBzMA-b-PDMAEMA) polymersomes. Polymersomes were prepared by self assembly of PBzMA-b-PDMAEMA copolymer, synthesised by group transfer polymerisation. Polymersomes display a diameter of 270 nm and a shell thickness of 11nm. Assembly on planar surfaces was followed by means of the Quartz Crystal Microbalance with Dissipation (QCM-D) and Atomic Force Microscopy (AFM). Detailed information on the assembly mechanism and surface topology of the polymersome/polyelectrolyte films was thereby obtained. The assembly of polymersomes and PSS on top of silica particles of 500 nm in diameter was confirmed by ζ-potential measurements. Confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed that polymersome/PSS coated silica particles increase in total diameter up to 3-5µm. This hints toward the formation of densely packed polymersome layers. In addition, CLSM showed that polymersome/PSS films exhibit a high loading capacity that could potentially be used for encapsulation and delivery of diverse chemical species. These results provide an insight into the formation of multilayered films with compartmentalised hydrophilic/hydrophobic domains and may lead to the successful application of polymersomes in surface-engineered colloidal systems.

Chitosan-decorated polystyrene-b-poly(acrylic acid) polymersomes as novel carriers for topical delivery of finasteride.

In view of the fact that the oral administration of finasteride (FIN) has resulted in various undesirable systemic side effects, the topical application of polystyrene and poly(acrylic acid)-based polymersomes (underexplored system) was investigated. Undecorated PS139-b-PAA17 and PS404-b-PAA63 vesicles (C3 and C7, respectively) or vesicles decorated with chitosan samples of different molecular weight (C3/CS-oligo, C7/CS-oligo, C3/CS-37 and C7/CS-37) were prepared by the co-solvent self-assembly method and characterized by small-angle X-ray scattering,transmission electron microscopy and dynamic light scattering techniques. In vitro release experiments and ex vivo permeation using Franz diffusion cells were carried out (through comparison with hydroethanolic finasteride solution). The ideal system should provide high finasteride retention in the dermis and epidermis while allowing some control of the drug release. The particle size and in vitro release were negatively correlated with the permeation coefficient and skin retention in both the epidermis and dermis. The findings that the longest lag time was obtained for the hydroethanolic drug solution and lowest permeation for the systems able to release the drug faster support the hypothesis that nanostructured systems may be required to enhance the penetration and permeation of the drug. Chitosan-decorated polymersomes interacted more strongly with the skin components than non-decorated samples, probably due to the positive surface charge, which increased the FIN retention and reduced the lag time. C7 polymersomes decorated with chitosan were more appropriate for topical applications (high retention in the dermis and epidermis and controlled drug delivery).