Nanocomposites of Natural Rubber Containing Montmorillonite Modified by Poly(2-oxazolines).

Nanocomposites with a natural rubber (NR) matrix containing organomodified montmorillonite (MMT) as a precursor of nanoparticles were prepared using two different polyoxazolines as surface modifiers of the MMT. The materials were characterized by X-ray diffraction, transmission electronic microscopy and ultimate mechanical properties, and parameters obtained by DMTA method (storage and loss moduli and loss tangent) were determined. It was found that the effect of nanofillers presence has a significant effect on tensile strength as well as elongation at break, which are higher for materials with higher viscosity due to the presence of carbon blacks compared to the composites without carbon blacks. From the two modifiers, poly(2-ethyl-2-oxazoline) was identified as a prospective modifier for surface modification of MMT used as the possible additive for tyre treads exhibiting optimal balance between fuel consumption and safety of driving concerning breaking action and lateral breakaway.

Cationic amino-acid functionalized polymethacrylamide vectors for siRNA transfection based on modification of poly(2-isopropenyl-2-oxazoline).

Poly(2-isopropenyl-2-oxazoline) (PiPOx) is a functional polymer showing great potential for the development of smart biomaterials. The straightforward synthesis and post-polymerization functionalization of PiPOx offers many opportunities for tailoring the properties of the polymer towards biomaterials. In this study we report for the first time PiPOx-based cationic charged polymethacrylamides with amino acid side chains that can complex siRNA and promote transfection in vitro. Therefore, PiPOx was fully modified via ring opening addition reactions with the carboxylic acid groups of a series of N-Boc-L-amino acids and their reaction kinetics were investigated. Based on the determined kinetic constants, another series of PiPOx-based copolymers with balanced hydrophilic/hydrophobic content of N-Boc-L-amino acids were obtained via one-pot modification reaction with two different N-Boc-L-amino acids. The N-Boc protected homopolymers and related copolymers were deprotected to obtain (co)polymers with the targeted side chain cationic charged units. The (co)polymers' structures were fully investigated via FT-IR and 1H NMR spectroscopy, size exclusion chromatography (SEC), and TGA-DSC-MS analysis. The polarimetry measurements revealed that the homopolymers retain their chiroptical properties after post-modification, and a sign inversion is noticed from (L) N-Boc-protected analogues to (D) for the TFA cationic charged homopolymers. Generally, cationically charged homopolymers with hydrophilic amino acids on the side chain showed efficient complexation of siRNA, but poor transfection while cationic copolymers having both tryptophan and valine or proline side chains revealed moderate siRNA binding, high transfection efficiency (> 90% of the cells) and potent gene silencing with IC50 values down to 5.5 nM. Particularly, these cationic copolymers showed higher gene silencing potency as compared to the commercial JetPRIME® reference, without reducing cell viability in the concentration range used for transfection, making this a very interesting system for in vitro siRNA transfection.

Mechanism of Action of Oxazoline-Based Antimicrobial Polymers Against Staphylococcus aureus: In Vivo Antimicrobial Activity Evaluation.

Antimicrobial-resistant pathogens have reached alarming levels, becoming one of the most pressing global health issues. Hence, new treatments are necessary for the fight against antimicrobial resistance. Synthetic nanoengineered antimicrobial polymers (SNAPs) have emerged as a promising alternative to antimicrobial peptides, overcoming some of their limitations while keeping their key features. Herein, a library of amphiphilic oxazoline-based SNAPs using cationic ring-opening polymerization (CROP) is designed. Amphipathic compounds with 70% cationic content exhibit the highest activity against clinically relevant Staphylococcus aureus isolates, maintaining good biocompatibility in vitro and in vivo. The mechanism of action of the lead compounds against S. aureus is assessed using various microscopy techniques, indicating cell membrane disruption, while the cell wall remains unaffected. Furthermore, a potential interaction of the compounds with bacterial DNA is shown, with possible implications on bacterial division. Finally, one of the compounds exhibits high efficacy in vivo in an insect infection model.

Determination of the Degree of Crystallinity of Poly(2-methyl-2-oxazoline).

A new method for purification of 2-methyl-2-oxazoline using citric acid was developed and living cationic ring-opening polymerization of 2-methyl-2-oxazoline was carried out. Polymerization was conducted in acetonitrile using benzyl chloride-boron trifluoride etherate initiating system. According to DSC data, the temperature range of melting of the crystalline phase of the resulting polymer was 95-180 °C. According to small-angle X-ray scattering and wide-angle X-ray diffraction data, the degree of crystallinity of the polymer was 12%. Upon cooling of the polymer melt, the polymer became amorphous. Using thermogravimetric analysis, it was found that the thermal destruction of poly(2-methyl-2-oxazoline) started above 209 °C.

The Role of Polymer Structure in Formation of Various Nano- and Microstructural Materials: 30 Years of Research in the Laboratory of Nano- and Microstructural Materials at the Centre of Polymer and Carbon Materials PAS.

The review summarizes the research carried out in the Laboratory of Nano- and Microstructural Materials at the Centre of Polymer and Carbon Materials, Polish Academy of Sciences (CMPW PAS). Studies carried out for many years under the guidance of Professor Andrzej Dworak led to the development and exploration of the mechanisms of oxirane and cyclic imine polymerization and controlled radical polymerization of methacrylate monomers. Based on that knowledge, within the last three decades, macromolecules with the desired composition, molar mass and topology were obtained and investigated. The ability to control the structure of the synthesized polymers turned out to be important, as it provided a way to tailor the physiochemical properties of the materials to their specific uses. Many linear polymers and copolymers as well as macromolecules with branched, star, dendritic and hyperbranched architectures were synthesized. Thanks to the applied controlled polymerization techniques, it was possible to obtain hydrophilic, hydrophobic, amphiphilic and stimulus-sensitive polymers. These tailor-made polymers with controlled properties were used for the construction of various types of materials, primarily on the micro- and nanoscales, with a wide range of possible applications, mainly in biomedicine. The diverse topology of polymers, and thus their properties, made it possible to obtain various types of polymeric nanostructures and use them as nanocarriers by encapsulation of biologically active substances. Additionally, polymer layers were obtained with features useful in medicine, particularly regenerative medicine and tissue engineering.

Polyoxazolines with a Vicinally Double-Bioactivated Terminus for Biomacromolecular Affinity Assessment.

Interactions between proteins and carbohydrates with larger biomacromolecules, e.g., lectins, are usually examined using self-assembled monolayers on target gold surfaces as a simplified model measuring setup. However, most of those measuring setups are either limited to a single substrate or do not allow for control over ligand distance and spacing. Here, we develop a synthetic strategy, consisting of a cascade of a thioesterification, native chemical ligation (NCL) and thiol-ene reaction, in order to create three-component polymer conjugates with a defined double bioactivation at the chain end. The target architecture is the vicinal attachment of two biomolecule residues to the α telechelic end point of a polymer and a thioether group at the ω chain end for fixating the conjugate to a gold sensor chip surface. As proof-of-principle studies for affinity measurements, we demonstrate the interaction between covalently bound mannose and ConA in surface acoustic wave (SAW) and surface plasmon resonance (SPR) experiments.

Plasma Deposited Polyoxazoline Films Integration Into Spiral Microfluidics for the Targeted Capture of Size Selected Cells.

Biomolecules readily and irreversibly bind to plasma deposited Polyoxazoline thin films in physiological conditions. The unique reactivity of these thin films toward antibodies is driving the development of immunosensing platforms for applications in cancer diagnostics. However, in order for these coatings to be used as advanced immunosensors, they need to be incorporated into microfluidic devices that are sealed via plasma bonding. In this work, the thickness, chemistry and reactivity of the polyoxazoline films were assessed following plasma activation. Films deposited from methyl and isopropenyl oxazoline precursors were integrated into spiral microfluidic devices and biofunctionalized with prostate cancer specific antibodies. Using microbeads as model particles, the design of the spiral microfluidic was optimised to enable the size-based isolation of cancer cells. The device was tested with a mixed cell suspension of healthy and malignant prostate cells. The results showed that, following size-specific separation in the spiral, selective capture was achieved on the immunofunctionalised PPOx surface. This proof of concept study demonstrates that plasma deposited polyoxazoline can be used for immunosensing in plasma bonded microfluidic devices.

Synthesis and Investigation of Thermo-Induced Gelation of Partially Cross-Linked Poly-2-isopropyl-2-oxazoline in Aqueous Media.

Water-soluble, partially cross-linked poly-2-isopropyl-2-oxazoline combining the properties of chemical and physical gels was synthesized by a two-step procedure. Thermally induced sol-gel transition in its aqueous solution was studied by rheology, light scattering, and turbidimetry. It was demonstrated that the synthesized product is bimodal; it consists of linear and cross-linked components. The cross-linked components are responsible for the gelation, while the linear ones abate the viscosity growth. Heating the solution above the phase transition temperature leads to the self-assembly of the particles into a physical gel. The combination of chemical and physical cross-linking was found to be a prospective route for thermosensitive gel development.

Polyoxazolines based lipid nanocapsules for topical delivery of antioxidants.

Nano-sized lipid formulations offer a great potential for topical delivery of active compounds to treat and prevent human skin damages. Of particular importance is the high loading of hydrophobic molecules, the long-term stability and the auspicious penetration capacity especially reached when using lipid nanocapsules (LNC). Unfortunately, their formation currently relies on a phase inversion process that only operates when using a poly(ethylene glycol) (PEG) based surfactant belonging to the controversial PEG family that was subject of clinical awareness. The present study proposes an alternative to this overused polymer in formulations by designing LNC made of harmless amphiphilic polyoxazolines (POx). Implementing a short sonication step in the process allowed well-defined spherical nanoparticles of ~30 nm to be obtained. The structure of the so called LNC POx was composed of an oily core surrounded by a rigid shell of phospholipids and POx, which ensures a high stability over time, temperature, centrifugation and freezing. Encapsulation of the natural quercetin antioxidant led to a drug loading three times higher than for LNC constituted of PEG (LNC PEG). The antioxidant activity of loaded LNC POx was tested on mice fibroblasts and human keratinocytes after exposure to free radicals from peroxides and UVB irradiation, respectively. The radical scavenging capacity of quercetin loaded in the LNC POx was preserved and even slightly enhanced compared to LNC PEG, highlighting the POx value in nanoformulations.

Polyoxazolines based mixed micelles as PEG free formulations for an effective quercetin antioxidant topical delivery.

This study aims to prove the value of the polyoxazolines polymer family as surfactant in formulations for topical application and as an alternative to PEG overuse. The amphiphilic polyoxazolines (POx) were demonstrated to have less impact on cell viability of mice fibroblasts (NIH3T3) than their PEG counterparts. Mixed micelles, made of POx and phosphatidylcholine, were manufactured using thin film and high pressure homogenizer process. The mixed micelles were optimized to produce nanosized vesicles of about 20 nm with a spherical shape and stable over 28 days. The natural lipophilic antioxidant, quercetin, was successfully encapsulated (encapsulation efficiency 94 ±â€¯4% and drug loading 3.6 ±â€¯0.2%) in the mixed micelles with no morphological variation. Once loaded in the formulation, the quercetin impact on cell viability of NIH3T3 was decreased while its antioxidant activity remained unchanged. This work highlights the capacity of amphiphilic POx to create, in association with phospholipids, stable nanoformulations which show promise for topical delivery of antioxidant and ensure skin protection against oxidative stress.

Plasma deposited poly-oxazoline nanotextured surfaces dictate osteoimmunomodulation towards ameliorative osteogenesis.

Developing "osteoimmune-smart" bone substitute materials have become the forefront of research in bone regeneration. Biocompatible polymer coatings are applied widely to improve the bioactivity of bone substitute materials. In this context, polyoxazolines (Pox) have attracted substantial attention recently due to properties such as biocompatibility, stability, and low biofouling. In view of these useful properties, it is interesting to explore the capacity of Pox as an osteoimmunomodulatory agent to generate a favorable osteoimmune environment for osteogenesis. We applied a technique called plasma polymerization and succeeded in preparing Pox-like coatings (Ppox) and engineered their nanotopography at the nanoscale. We found that Ppox switched macrophages towards M2 extreme, thus inhibiting the release of inflammatory cytokines. The underlying mechanism may be related to the suppression of TLR pathway. The generated osteoimmune environment improved osteogenesis while inhibited osteoclastogenesis. This may be related to the release of osteogenic factors, especially Wnt10b from macrophages. The addition of nanotopography (16 nm, 38 nm, 68 nm) can tune the Ppox-mediated inhibition on inflammation and osteoclastic activities, while no significant effects were observed within the tested nano sizes on the Ppox-mediated osteogenesis. These results collectively suggest that Ppox can be useful as an effective osteoiumunomodulatory agent to endow bone substitute materials with favourable osteoimmunomodulatory property. STATEMENT OF SIGNIFICANCE: In this study, we succeeded in preparing plasma deposited Pox-like nano-coatings (Ppox) via plasma polymerization and found that Ppox nanotopographies are useful osteoimmunomodulatory tools. Their osteoimmunodolatory effects and underlying mechanisms are unveiled. It is the first investigation into the feasibility of applying poly-oxazoline as an osteoimmunomodulatory agent. This expand the application of poly-oxazoline into the forefront in bone regeneration area for the development of advanced "osteoimmune-smart" bone substitute materials.

Ecotoxicological impact of selected polyethylenimines toward their potential application as nitrogen fertilizers with prolonged activity.

Poly(2-oxazoline) polymers have found extensive application in the preparation of microcapsules for biomedical purposes. However, there is a scarcity of information related to their ecotoxicological assessment. Therefore, in this study, we focused on the ecotoxicity of selected polyethylenimines (PEIs) including poly(2-ethyl-2-oxazoline) (PEtOx) as an N-acyl-substituted PEI, linear polyethylenimine (LPEI) and branched polyethylenimine (BPEI). Oat (a monocotyledon) (Avena sativa) and radish (a dicotyledon) (Raphanus sativus) were selected as the representative plants, which are recommended by the Organization for Economic Cooperation and Development (OECD) 208 as the standard to test for plant growth. Shoot and root length, fresh and dry matter, level of total nitrogen in green parts of the plants, as well as total chlorophyll and carotenoids were determined. Phytotoxicity of all the tested parameters was dependent on the concentration of the examined polymers in the soil as well as on the time of their incubation in the soil. According to our results, the amount of nitrogen in green parts of the plants was increased compared to the control plants, which revealed the uptake of the plant-available form of nitrogen released from the tested PEIs. This was especially true for the plants treated with LPEI. Ecotoxicological impact of the incubated polymers in the soil against marine bacteria Allivibrio fischeri proved that, the all tested polyethylenimines may be classified as not harmful to aquatic microorganisms.

Mixing Poly(ethylene glycol) and Poly(2-alkyl-2-oxazoline)s Enhances Hydration and Viscoelasticity of Polymer Brushes and Determines Their Nanotribological and Antifouling Properties.

Poly(2-alkyl-2-oxazoline)s (PAOXAs) have progressively emerged as suitable alternatives for replacing poly(ethylene glycol) (PEG) in a variety of biomaterial-related applications, especially in the designing of polymer brush-based biointerfaces because of their stealth properties and chemical robustness. When equimolar mixtures of PEG and PAOXAs are assembled on surfaces to yield mixed polymer brushes, the interfacial physicochemical properties of the obtained films are significantly altered, in some cases, surpassing the biopassive and lubricious characteristics displayed by single-component PAOXA and PEG counterparts. With a combination of variable angle spectroscopic ellipsometry, quartz crystal microbalance with dissipation, and atomic force microscopy-based methods, we demonstrate that mixing of PEG brushes with equimolar amounts of PAOXA grafts determines an increment in film's hydration and viscoelasticity. In the case of mixtures of PEG and poly(2-methyl-2-oxazoline) or poly(2-ethyl-2-oxazoline), brushes displaying full inertness toward serum proteins and improved lubricity with respect to the corresponding single-component layers can be generated, while providing a multifunctional surface that substantially enlarges the applicability of the designed coatings.

Chemical Design of Non-Ionic Polymer Brushes as Biointerfaces: Poly(2-oxazine)s Outperform Both Poly(2-oxazoline)s and PEG.

The era of poly(ethylene glycol) (PEG) brushes as a universal panacea for preventing non-specific protein adsorption and providing lubrication to surfaces is coming to an end. In the functionalization of medical devices and implants, in addition to preventing non-specific protein adsorption and cell adhesion, polymer-brush formulations are often required to generate highly lubricious films. Poly(2-alkyl-2-oxazoline) (PAOXA) brushes meet these requirements, and depending on their side-group composition, they can form films that match, and in some cases surpass, the bioinert and lubricious properties of PEG analogues. Poly(2-methyl-2-oxazine) (PMOZI) provides an additional enhancement of brush hydration and main-chain flexibility, leading to complete bioinertness and a further reduction in friction. These data redefine the combination of structural parameters necessary to design polymer-brush-based biointerfaces, identifying a novel, superior polymer formulation.

Stable pH responsive layer-by-layer assemblies of partially hydrolysed poly(2-ethyl-2-oxazoline) and poly(acrylic acid) for effective prevention of protein, cell and bacteria surface attachment.

Polyoxazolines have received increasing attention as low-fouling materials with good stability and ease of functional group incorporation. We investigated layer-by-layer (LbL) assembly of poly(2-ethyl-2-oxazoline) (PEOX) with poly(acrylic acid) (PAA) to incorporate PEOX into thin conformal coatings with controllable thicknesses ranging from the nano- to micron range. Partial hydrolysis of PEOX (to form PEOX-I) was used to introduce secondary amine groups that enable post-assembly multilayer stabilization by heat-induced crosslinking. While as-assembled multilayers dissolve in aqueous solutions at pH 5 and above, thermally crosslinked multilayers were stable against film loss and instead exhibit pH responsive swelling. The anti-fouling properties of crosslinked coatings were assessed by evaluating the resistance of PEOX-I containing multilayers to fouling by proteins, cells and bacteria. Our study of multilayers with thicknesses ranging from ∼12nm to ∼1.5µm revealed thickness dependence of surface fouling resistance to BSA. Crosslinked multilayers of ∼220nm were found to be highly effective in suppressing surface adsorption of bovine serum albumin (BSA), while thinner or thicker layers were increasingly susceptible to BSA adsorption. We further found that coatings of ∼220nm and above were all highly effective at preventing surface attachment of fibroblasts, gram-positive (S. aureus) and gram-negative (E. coli) bacteria.

A platform for selective immuno-capture of cancer cells from urine.

Urothelial cancers are amongst the 10 most common types of cancer and represent a major health problem worldwide. Current urinary diagnostic tests for urothelial cancer are expensive and have limited sensitivity and specificity. In this work, proofs of concept for a selective cancer cell capture platform are presented with the aim to achieve the first generation of specific urinary tests for the detection of cancer cells in urine specimen. The unique reactivity of plasma deposited polyoxazoline was used to covalently bind cancer specific antibodies in microchannels. Cancer cells dispersed in patient urine were successfully captured with up to 99% selectivity and 100% sensitivity over a wide range of cell concentrations. The streamlined two steps preparation process of the capture platform represents an important advance in medical diagnostics, with broader potential applications.

Next-Generation Polymer Shells for Inorganic Nanoparticles are Highly Compact, Ultra-Dense, and Long-Lasting Cyclic Brushes.

Cyclic poly-2-ethyl-2-oxazoline (PEOXA) ligands for superparamagnetic Fe3 O4 nanoparticles (NPs) generate ultra-dense and highly compact shells, providing enhanced colloidal stability and bio-inertness in physiological media. When linear brush shells fail in providing colloidal stabilization to NPs, the cyclic ones assure long lasting dispersions. While the thermally induced dehydration of linear PEOXA shells cause irreversible aggregation of the NPs, the collapse and subsequent rehydration of similarly grafted cyclic brushes allow the full recovery of individually dispersed NPs. Although linear ligands are densely grafted onto Fe3 O4 cores, a small plasma protein such as bovine serum albumin (BSA) still physisorbs within their shells. In contrast, the impenetrable entropic shield provided by cyclic brushes efficiently prevents nonspecific interaction with proteins.

A computational study suggests that replacing PEG with PMOZ may increase exposure of hydrophobic targeting moiety.

In a previous study we showed that the cause of failure of a new, proposed, targeting ligand, the AETP moiety, when attached to a PEGylated liposome, was occlusion by the poly(ethylene glycol) (PEG) layer due to its hydrophobic nature, given that PEG is not entirely hydrophilic. At the time we proposed that possible replacement with a more hydrophilic protective polymer could alleviate this problem. In this study we have used computational molecular dynamics modelling, using a model with all atom resolution, to suggest that a specific alternative protective polymer, poly(2-methyloxazoline) (PMOZ), would perform exactly this function. Our results show that when PEG is replaced by PMOZ the relative exposure to the solvent of AETP is increased to a level even greater than that we found in previous simulations for the RGD peptide, a targeting moiety that has previously been used successfully in PEGylated liposome based therapies. While the AETP moiety itself is no longer under consideration, the results of this computational study have broader significance: the use of PMOZ as an alternative polymer coating to PEG could be efficacious in the context of more hydrophobic targeting ligands. In addition to PMOZ we studied another polyoxazoline, poly(2-ethyloxazoline) (PEOZ), that has also been mooted as a possible alternate protective polymer. It was also found that the RDG peptide occlusion was significantly greater for the case of both oxazolines as opposed to PEG and that, unlike PEG, neither oxazoline entered the membrane. As far as we are aware this is the first time that polyoxazolines have been studied using molecular dynamics simulation with all atom resolution.

A high capacity polymeric micelle of paclitaxel: Implication of high dose drug therapy to safety and in vivo anti-cancer activity.

The poor solubility of paclitaxel (PTX), the commercially most successful anticancer drug, has long been hampering the development of suitable formulations. Here, we present translational evaluation of a nanoformulation of PTX, which is characterized by a facile preparation, extraordinary high drug loading of 50% wt. and PTX solubility of up to 45 g/L, excellent shelf stability and controllable, sub-100 nm size. We observe favorable in vitro and in vivo safety profiles and a higher maximum tolerated dose compared to clinically approved formulations. Pharmacokinetic analysis reveals that the higher dose administered leads to a higher exposure of the tumor to PTX. As a result, we observed improved therapeutic outcome in orthotopic tumor models including particularly faithful and aggressive "T11" mouse claudin-low breast cancer orthotopic, syngeneic transplants. The promising preclinical data on the presented PTX nanoformulation showcase the need to investigate new excipients and is a robust basis to translate into clinical trials.