Unraveling the synergism mechanistic insight of O-vacancy and interfacial charge transfer in WO3-x decorated on Ag2CO3/BiOBr for photocatalysis of water pollutants: Based on experimental and density functional theory (DFT) studies.

Photocatalysis has been widely used as one of the most promising approaches to remove various pollutants in liquid or gas phases during the last decade. The main emphasis of the study is on the synergy of vacancy engineering and heterojunction formation, two widely used modifying approaches, to significantly alter photocatalytic performance. The vacancy-induced Ag2CO3/BiOBr/WO3-x heterojunction system has been fabricated using a co-precipitation technique to efficiently abate methylene blue (MB) dye and doxycycline (DC) antibiotic. The as-fabricated Ag2CO3/BiOBr/WO3-x heterojunction system displayed improved optoelectronic characteristic features because of the rational combination of dual charge transferal route and defect modulation. The Ag2CO3/BiOBr/WO3-x system possessed 97% and 74% photodegradation efficacy for MB and DC, respectively, with better charge isolation and migration efficacy. The ternary photocatalyst possessed a multi-fold increase in the reaction rate for both MB and DC, i.e., 0.021 and 0.0078 min-1, respectively, compared to pristine counterparts. Additionally, more insightful deductions about the photodegradation routes were made possible by the structural investigations of MB and DC using density functional theory (DFT) simulations. This study advances the understanding of the mechanisms forming visible light active dual Z-scheme heterojunction for effective environmental remediation.

Glycolipids biosurfactants production using low-cost substrates for environmental remediation: progress, challenges, and future prospects.

The production of renewable materials from alternative sources is becoming increasingly important to reduce the detrimental environmental effects of their non-renewable counterparts and natural resources, while making them more economical and sustainable. Chemical surfactants, which are highly toxic and non-biodegradable, are used in a wide range of industrial and environmental applications harming humans, animals, plants, and other entities. Chemical surfactants can be substituted with biosurfactants (BS), which are produced by microorganisms like bacteria, fungi, and yeast. They have excellent emulsifying, foaming, and dispersing properties, as well as excellent biodegradability, lower toxicity, and the ability to remain stable under severe conditions, making them useful for a variety of industrial and environmental applications. Despite these advantages, BS derived from conventional resources and precursors (such as edible oils and carbohydrates) are expensive, limiting large-scale production of BS. In addition, the use of unconventional substrates such as agro-industrial wastes lowers the BS productivity and drives up production costs. However, overcoming the barriers to commercial-scale production is critical to the widespread adoption of these products. Overcoming these challenges would not only promote the use of environmentally friendly surfactants but also contribute to sustainable waste management and reduce dependence on non-renewable resources. This study explores the efficient use of wastes and other low-cost substrates to produce glycolipids BS, identifies efficient substrates for commercial production, and recommends strategies to improve productivity and use BS in environmental remediation.

Strategies to enhance the circularity of non-bottle PET packaging waste based on a detailed material characterisation.

The compositions of Dutch lightweight packaging waste (LWP) and sorted products named "PET (Polyethylene terephthalate) trays" have been determined on object level. Additionally, the PET trays from both waste types were sorted in 16 categories representing their packaging use and material build-up. The material composition of at least 10 representative trays from each category was determined with chemical and thermal analysis, based on which the average material composition per category was established. Based on this data the average material composition of sorted PET tray products was approximated. The recyclability of the various categories of PET trays was assessed based on their material build-up. The most ubiquitous PET trays in Dutch LWP and sorted products were only found to be suitable to produce opaque recycled PET with mechanical recycling processes. Whereas only some more uncommon PET trays can be used to produce transparent recycled PET with mechanical recycling processes. Depolymerisation is deemed to be a more appropriate recycling process that will allow the production of transparent food-grade recycled PET.

Upgrade of Acetone-Butanol-Ethanol Mixture to High-Value Biofuels over Ca-Doped Ni-CaO-SiO2 catalyst.

The selective conversion of biomass fermentation derived from an acetone-butanol-ethanol (ABE) mixture into high-value biofuels is of paramount importance for industrial applications. However, challenges persist in effectively controlling the selectivity of long carbon chain ketones in elevated ABE conversion. In this research, a Ca-doped Ni-CaO-SiO2 catalyst was designed and employed to achieve a remarkable conversion of 89.9% into ketone products from the extracted ABE mixture. The selectivity for C8+ ketones reaches 41.8%, demonstrating exceptional performance. The reversible phase transition between Ca2SiO4 and CaCO3 enhances the recyclability, thereby improving the sustainability of the process. Additionally, the trace intermediate 3-hepten-2-one was successfully detected using two-dimensional GC×GC-MS, elucidating the conversion pathway in the catalytic upgrading of the ABE mixture. This finding offers a potential route for the efficient utilization of biomass and the highly selective production of value-added chemicals.

Towards Sustainable and Fire-Safe Thermosets Using Phosphorus-Containing Covalent Adaptable Networks.

Dynamic covalent chemistry is a promising strategy for developing recyclable thermosets and their carbon fiber reinforced composites, in line with the goal of green and sustainable development. However, a significant challenge lies in balancing the dynamic reversibility and the desired service performances, such as thermal, mechanical properties, and flame retardancy. It has hindered the broader application of dynamic materials beyond the initial proof of concept. This concept provides an overview of the current state of research on phosphorus-containing covalent adaptable networks (CANs), highlighting key designing and regulating principles for tailoring comprehensive properties including flame retardancy, mechanical and thermal properties, as well as dynamic behaviours such as malleability, reprocessability and degradability. Finally, new frontiers and opportunities in developing high-performance sustainable CANs-based thermosets and their carbon fiber composites for structural engineering applications are prospected.

Multi-Modal Melt-Processing of Birefringent Cellulosic Materials for Eco-Friendly Anti-Counterfeiting.

Ubiquitous anti-counterfeiting materials with a rapidly rising annual consumption (over 1010 m2) can pose a serious environmental burden. Biobased cellulosic materials with birefringence offer attractive sustainable alternatives, but their scalable solvent-free processing remain challenging. Here, a dynamic chemical modification strategy is proposed for multi-modal melt-processing of birefringent cellulosic materials for eco-friendly anti-counterfeiting. Relying on the thermal-activated dynamic covalent-locking of the spatial topological structure of preferred oriented cellulose, the strategy balances the contradiction between the strong confinement of long-range ordered structures and the molecular motility required for entropically-driven reconstruction. Equipped with customizable processing forms including mold-pressing, spinning, direct-ink-writing, and blade-coating, the materials exhibit a wide color gamut, self-healing efficiency (94.5%), recyclability, and biodegradability. Moreover, the diversified flexible elements facilitate scalable fabrication and compatibility with universal processing techniques, thereby enabling versatile and programmable anti-counterfeiting. The strategy is expected to provide references for multi-modal melt-processing of cellulose and promote sustainable innovation in the anti-counterfeiting industry.

Synthesis of a novel magnetic calcium-rich biochar nanocomposite for efficient removal of phosphate from aqueous solution.

Phosphorus (P) scarcity and eutrophication have triggered the development of new materials for P recovery. In this work, a novel magnetic calcium-rich biochar nanocomposite (MCRB) was prepared through co-precipitation of crab shell derived biochar, Fe2+ and Fe3+. Characteristics of the material demonstrated that the MCRB was rich in calcite and that the Fe3O4 NPs with a diameter range of 18-22 nanometers were uniformly adhered on the biochar surface by strong ether linking (C-O-Fe). Batch tests demonstrated that the removal of P was pH dependent with an optimal pH of 3-7. The MCRB exhibited a superior P removal performance, with a maximum removal capacity of 105.6 mg g-1, which was even higher than the majority lanthanum containing compounds. Study of the removal mechanisms revealed that the P removal by MCRB involved the formation of hydroxyapatite (HAP-Ca5(PO4)3OH), electrostatic attraction and ligand exchange. The recyclability test demonstrated that a certain level (approximately 60%) was still maintained even after the six adsorption-desorption process, suggesting that MCRB is a promising material for P removal from wastewater.

Preparation and Characterization of Novel Poly(thiourethane)-Poly(isocyanurate) Covalent Adaptable Networks: Effect of the Catalysts.

Poly(thiourethane)-based covalent adaptable networks are synthesized by reacting a trimer of hexamethylene diisocyanate (Desmodur N3300) containing isocyanurate groups in its structure with 1,6-hexanedithiol. The catalysts evaluated for this process include dibutyltin dilaurate (DBTDL), lanthanum triflate (La(OTf)3), and a thermal precursor of 1,8-diazabicyclo[5.4.0]undec-7-ene (BGDBU). The use of DBTDL results in the initiation of curing upon mixing, while the other two catalysts exhibit a latency period in the reactive mixture, with curing starting at about 90 °C. Notably, the use of the lanthanum salt produces an additional minor exothermic reaction at 80 °C. This phenomenon corresponds to the trimerization of isocyanates rending isocyanurates, leaving a portion of unreacted thiols. Materials prepared with BGDBU or La(OTf)3 present shorter relaxation times than those prepared with DBTDL. Nevertheless, the materials containing the lanthanum salt do not reach complete relaxation, likely due to the reinforcement of the permanent network through increased isocyanurate content. The formation of isocyanurates produces a stoichiometric imbalance, leaving unreacted thiols. This transforms the exchange process into a dual mechanism involving a dissociative process of thiourethanes to isocyanate and thiol, along with an interchange through thiol attacking the thiourethane group. The materials exhibit good recyclability and self-healing characteristics.

Towards Sustainable Materials: A Review of Acylhydrazone Chemistry for Reversible Polymers.

Transitioning towards a circular economy, extensive research has focused on dynamic covalent bonds (DCBs) to pave the way for more sustainable materials. These bonds enable debonding and rebonding on demand, as well as facilitating end-of-life recycling. Acylhydrazone/hydrazone chemistry offers a material with high stability under neutral and basic conditions making it a promising candidate for materials research, though the material is susceptible to acid degradation. However, this degradation under acidic conditions can be exploited, making it widely applicable in self-healing and biomedical fields, with potential for reprocessing and recycling. This review highlights studies exploring the reversibility of acylhydrazone/hydrazone bonds in various polymers, altering their properties, and utilizing them in applications such as self-healing, reprocessing, and recycling. The review also focuses on how the mechanical properties are affected by the presence of dynamic linkages, and methods to improve the mechanical performance.

Carbohydrate-Based Reprocessable and Healable Covalent Adaptable Biofoams.

Polymeric foams derived from bio-based resources and capable of self-healing and recycling ability are of great demand to fulfill various applications and address environmental concerns related to accumulation of plastic wastes. In this article, a set of polyester-based covalent adaptable biofoams (CABs) synthesized from carbohydrates and other bio-derived precursors under catalyst free conditions to offer a sustainable alternative to conventional toxic isocyanate-based polyurethane foams is reported. The dynamic ß-keto carboxylate linkages present in these biofoams impart self-healing ability and recyclability to these samples. These CABs display adequate tensile properties especially compressive strength (≤123 MPa) and hysteresis behavior. The CABs swiftly stress relax at 150 °C and are reprocessable under similar temperature conditions. These biofoams have displayed potential for use as attachment on solar photovoltaics to augment the output efficiency. These CABs with limited swellability in polar protic solvents and adequate mechanical resilience are suitable for other commodity applications.

Carbon Nanofiber Membranes Loaded with MXene@g-C3N4: Preparation and Photocatalytic Property.

In this study, a Ti3C2 MXene@g-C3N4 composite powder (TM-CN) was prepared by the ultrasonic self-assembly method and then loaded onto a carbon nanofiber membrane by the self-assembly properties of MXene for the treatment of organic pollutants in wastewater. The characterization of the TM-CN and the C-TM-CN was conducted via X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectrometer (FTIR) to ascertain the successful modification. The organic dye degradation experiments demonstrated that introducing an appropriate amount of Ti3C2 MXene resulted in the complete degradation of RhB within 60 min, three times the photocatalytic efficiency of a pure g-C3N4. The C-TM-CN exhibited the stable and outstanding photocatalytic degradation of the RhB solution over a wide range of pH values, indicating the characteristics of the photodegradation of organic pollutants in a wide range of aqueous environments. Furthermore, the results of the cyclic degradation experiments demonstrated that the C-TM-CN composite film maintained a degradation efficiency of over 85% after five cycles, thereby confirming a notable improvement in its cyclic stability. Consequently, the C-TM-CN composite film exhibits excellent photocatalytic performance and is readily recyclable, making it an auspicious eco-friendly material in water environment remediation.

Strengthening-Durable Trade-Off and Self-Healing, Recyclable Shape Memory Polyurethanes Enabled by Dynamic Boron-Urethane Bonds.

Addressing the demand for integrating strength and durability reinforcement in shape memory polyurethane (SMPU) for diverse applications remains a significant challenge. Here a series of SMPUs with ultra-high strength, self-healing and recyclability, and excellent shape memory properties through introducing dynamic boron-urethane bonds are synthesized. The introducing of boric acid (BA) to polyurethane leading to the formation of dynamic covalent bonds (DCB) boron-urethane, that confer a robust cross-linking structure on the SMPUs led to the formation of ordered stable hydrogen-bonding network within the SMPUs. The flexible crosslinking with DCB represents a novel strategy for balancing the trade-off between strength and durability, with their strengths reaching up to 82.2 MPa while also addressing the issue of durability in prolonged usage through the provision of self-healing and recyclability. The self-healing and recyclability of SMPU are demonstrated through rapid dynamic exchange reaction of boron-urethane bonds, systematically investigated by dynamic mechanical analysis (DMA). This study sheds light on the essential role of such PU with self-healing and recyclability, contributing to the extension of the PU's service life. The findings of this work provide a general strategy for overcoming traditional trade-offs in preparing SMPUs with both high strength and good durability.

Studying removal of anionic dye by prepared highly adsorbent surface hydrogel nanocomposite as an applicable for aqueous solution.

In this study, a Sodium alginate-g-poly (acrylamide-clay)/TiO2 hydrogel nanocomposite [SA-g-p(AM-Bn)/TiO2] was synthesized using the biopolymer sodium alginate (SA), acrylamide (AM), and bentonite clay (Bn) as hybrid materials embedded with titanium dioxide nanoparticles (TiO2NPs) for the removal of toxic Congo Red (CR) dye from an aqueous solution. The [SA-g-p(AM-Bn)/TiO2] nanocomposite has been described on the basis of thermal stability, morphological analysis, estimation of functional group, and crystalline/amorphous character by TGA, EFSEM/EDX, TEM, FT-IR, and XRD analysis, respectively. The effects of operational parameters toward the CR dye adsorption on [SA-g-p(AM-Bn)/TiO2], including contact time, adsorbent dosage, initial concentration, initial pH, and temperature were investigated. The maximum adsorption efficiency was found to be 185.12 mg/g for [SA-g-p(AM-Bn)/TiO2] in 100 mg/L of solution CR at pH 6.0 within 1 h. The equilibrium isotherms, kinetics, and thermodynamics parameters of adsorption were examined, and results showed that the isotherm fitted the Freundlich model and the kinetics adsorption model of CR followed pseudo-first-order, thus indicating physisorption of anionic-CR onto the sorbent due to the development of an electrostatic attraction bond. Thermodynamic parameters for [SA-g-p(AM-Bn)/TiO2] have values (ΔG and ΔH) reflecting the spontaneous and endothermic nature of the adsorption processes. Moreover, [SA-g-p(AM-Bn)/TiO2] presented outstanding excellent reusability and recyclability with a relatively best removal percentage as compared to [SA-g-p(AM-Bn)] and suggested their applicability towards the textile industry and water purification purposes.

Ultra-Highly Stiff and Tough Shape Memory Polyurea with Unprecedented Energy Density by Precise Slight Cross-Linking.

Shape memory polymers (SMPs) have attracted significant attention and hold vast potential for diverse applications. Nevertheless, conventional SMPs suffer from notable shortcomings in terms of mechanical properties, environmental stability, and energy density, significantly constraining their practical utility. Here, inspired by the structure of muscle fibers, an innovative approach that involves the precise incorporation of subtle, permanent cross-linking within a hierarchical hydrogen bonding supramolecular network is reported. This novel strategy has culminated in the development of covalent and supramolecular shape memory polyurea, which exhibits exceptional mechanical properties, including high stiffness (1347 MPa), strength (82.4 MPa), and toughness (312.7 MJ m-3), ensuring its suitability for a wide range of applications. Furthermore, it boasts remarkable recyclability and repairability, along with excellent resistance to moisture, heat, and solvents. Moreover, the polymer demonstrates outstanding shape memory effects characterized by a high energy density (24.5 MJ m-3), facilitated by the formation of strain-induced oriented nanostructures that can store substantial amounts of entropic energy. Simultaneously, it maintains a remarkable 96% shape fixity and 99% shape recovery. This delicate interplay of covalent and supramolecular bonds opens up a promising pathway to the creation of high-performance SMPs, expanding their applicability across various domains.

Strategies towards Fully Recyclable Commercial Epoxy Resins: Diels-Alder Structures in Sustainable Composites.

The Diels-Alder equilibrium is a widely known process in chemistry that can be used to provide a thermoset structure with recyclability and reprocessability mechanisms. In this study, a commercial epoxy resin is modified through the integration of functional groups into the network structure to provide superior performance. The present study has demonstrated that it is possible to adapt the curing process to efficiently incorporate these moieties in the final structure of commercial epoxy-based resins. It also evaluates the impact that they have on the final properties of the cured composites. In addition, different approaches have been studied for the incorporation of the functional group, adjusting and adapting the stoichiometry of the system components due to the differences in reactivity caused by the presence of the incorporated reactive groups, with the objective of maintaining comparable ratios of epoxy/amine groups in the formulation. Finally, it has been demonstrated that although the Diels-Alder equilibrium responds under external conditions, such as temperature, different sets of parameters and behaviors are to be expected as the structures are integrated into the thermoset, generating new equilibrium temperatures. In this way, the present research has explored sustainable strategies to enable the recyclability of commercial thermoset systems through crosslinking control and its modification.

Achieving Exceptional Thermal and Hydrolytic Resistance in Chemically Circular Polyesters via In-Chain 1,3-Cyclobutane Rings.

Polyesters, a highly promising class of circular polymers for achieving a closed-loop sustainable plastic economy, inherently exhibit material stability defects, especially in thermal and hydrolytic instability. Here, we introduce a class of polyesters, P(4R-BL) (R=Ph, Bu), featuring conformationally rigid 1,3-cyclobutane rings in the backbone. These polyesters not only exhibit superior thermostability (Td,5%=376-380 °C) but also demonstrate exceptional hydrolytic resistance with good integrity even after 1 year in basic and acidic aqueous solutions, distinguishing themselves from typical counterparts. Tailoring the flexibility of the side group R enables the controlled thermal and mechanical performance of P(4Ph-BL) and P(4Bu-BL) to rival durable syndiotactic polystyrene (SPS) and low-density polyethylene (LDPE), respectively. Significantly, despite their high stability, both polyesters can be effectively depolymerized into pristine monomers, establishing a circular life cycle.

Enzyme_Metal-Organic Framework Composites as Novel Approach for Microplastic Degradation.

Plastic pollution is one of the main worldwide environmental concerns. Our lifestyle involves persistent plastic consumption, aggravating the low efficiency of wastewater treatment plants in its removal. Nano/microplastics are accumulated in living beings, pushing to identify new water remediation strategies to avoid their harmful effects. Enzymes (e. g., Candida rugosa-CrL) are known natural plastic degraders as catalysts in depolymerization reactions. However, their practical use is limited by their stability, recyclability, and economical concerns. Here, enzyme immobilization in metal-organic frameworks (CrL_MOFs) is originally presented as a new plastic degradation approach to achieve a boosted plastic decomposition in aqueous systems while allowing the catalyst cyclability. Bis-(hydroxyethyl)terephthalate (BHET) was selected as model substrate for decontamination experiments for being the main polyethylene terephthalate (PET) degradation product. Once in contaminated water, CrL_MOFs can eliminate BHET (37 %, 24 h), following two complementary mechanisms: enzymatic degradation (CrL action) and byproducts adsorption (MOF effect). As a proof-of-concept, the capacity of a selected CrL_MOF composite to eliminate the BHET degradation products and its reusability are also investigated. The potential of these systems is envisioned in terms of improving enzyme cyclability, reducing costs along with feasible co-adsorption of plastic byproducts and other harmful contaminants, to successfully remove them in a single step.

Preparation of highly adsorptive biochar by sequential iron impregnation under refluxing and pyrolysis at low temperature for removal of tetracycline.

Iron-doping modification is a prevailing approach for improving adsorption capability of biochar with environmental friendliness, but usually requires high temperature and suffers from iron aggregation. Herein, a highly adsorptive biochar was manufactured via sequential disperse impregnation of iron by refluxing and pyrolysis at low temperature for eliminating tetracycline (TC) from aqueous solution. Iron oxides and hydroxides were impregnated and stably dispersed on the carbon matrix as pyrolyzed at 200 °C, meanwhile abundant oxygen and nitrogen functional groups were generated on surface. The iron-doped biochar exhibited up to 891.37 mg/g adsorption capacity at pH 5, and could be recycled with high adsorption capability. The adsorption of TC should be mostly contributed to the hydrogen bonding of N/O functional groups and the hydrogen bonding/coordination of iron oxides/hydroxides. This would provide a valuable guide for dispersedly doping iron and conserving functional groups on biochar, and a super iron-doped biochar was prepared with superior recyclability.

Sustainable Vat Photopolymerization-Based 3D-Printing through Dynamic Covalent Network Photopolymers.

Vat photopolymerization (VPP) based three-dimensional (3D) printing, including stereolithography (SLA) and digital light projection (DLP), is known for producing intricate, high-precision prototypes with superior mechanical properties. However, the challenge lies in the non-recyclability of covalently crosslinked thermosets used in these printing processes, limiting the sustainable utilization of printed prototypes. This review paper examines the recently explored avenue of VPP 3D-printed dynamic covalent network (DCN) polymers, which enable reversible crosslinks and allow for the reprocessing of printed prototypes, promoting sustainability. These reversible crosslinks facilitate the rearrangement of crosslinked polymers, providing printed polymers with chemical/physical recyclability, self-healing capabilities, and degradability. While various mechanisms for DCN polymer systems are explored, this paper focuses solely on photocurable polymers to highlight their potential to revolutionize the sustainability of VPP 3D printing.

Activity and recyclability enhancement of pH-dependent Fe0@BC-mediated heterogeneous sodium percarbonate (SPC)-reducing agents (RA) system.

Dyes pose great threats to the aquatic environment and human health. Fe0-based Fenton-like systems have been widely employed for the degradation of organic dyes. However, the regulation of degradability and recyclability was still unclear. In this study, Rhodamine B (RhB) was served as the model pollutant, hydroxylamine hydrochloride was selected as the RA, the natural photocatalysis system demonstrated stable operation. RA, as performance enhancement agent, was firstly reported in micro/nano-Zero-Valent Iron@Biochar (m/nZVI@BC) based SPC-RA system. Carrier size-fractionated m/nZVI@BC was fabricated by one-step carbothermal method. As a result, RA synergistically interacted with SPC, and the reaction time reduced from 15 min to 4 min. In the 0.010 g m/nZVI@BC-mediated SPC-RA system, over 95% of RhB (100 mg·L-1, 1041.667 mg·g-1) was successfully degraded. The maximum degradation ability could still exceed 1g·g-1 via 5 times repeated applications. Meanwhile, the loss of degradability, caused by halving SPC concentration could be compensated by RA dosage measurement. The entire degradation process was predominantly dominated by free radicals (•OH> 1O2> •O2-> •CO3-). Reactive oxidizing species (ROSs) were primarily excited by α-Fe0, Fe3C and N sites of biochar (BC). Light and BC carrier dedicated slight influence. These discoveries shed a light on the activity and recyclability regulation of catalytic material, aligning with the principles of green chemistry and cleaner production. This study demonstrates a novel approach to efficient management of solid waste disposal, reuse of waste biomass, advanced treatment of dye-containing wastewater, pollution control in aquatic environments.