Color Stability of Single-Shade Resin Composites in Direct Restorations: A Systematic Review and Meta-Analysis of Randomized Controlled Trials.

The objective was to compare the color match and color stability behavior of single- and multi-shade resin-based composites (RBCs) used for direct restorations. This review was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. Randomized clinical trials evaluating the shade performance of single-shade RBCs in direct restorations were included. A search of the scientific literature was performed in five databases (April 2024). The meta-analysis was performed using RevMan 5.4, calculating the risk difference (RD) and 95% confidence interval (CI) of the dichotomous outcome using a random effects model. Bias was assessed using the RoB 2.0 tool, and certainty of evidence was assessed using the GRADEpro tool. Four studies were selected, with 263 restorations analyzed. The results showed comparable performance between single-shade RBCs and multi-shade RBCs in terms of color match and color stability over 12 months. Three studies had a low risk of bias with all expected results, and one study had some concerns. The certainty of evidence for color stability was considered low for all follow-up periods due to the small number of events and sample size. According to the United States Public Health Service Evaluation (USPHS) and the World Dental Federation (FDI), there is comparable clinical color performance between single-shade and multi-shade RBCs over 12 months.

Effect of mouthwashes on the color stability of a nanohybrid composite resin.

The aim of this study was to evaluate the influence of different mouthwash solutions on the color stability of a nanohybrid composite resin. Forty discs of Luna nanohybrid composite resin were prepared and randomly assigned to 4 experimental groups (n = 10), determined by the type of immersion solution: distilled water (DW); Oral-B Pro-Health mouthwash (OBPH); Listerine Total Care mouthwash (LTC); or Colgate Plax Infinity mouthwash (CPI). The discs were immersed in solution for 30 minutes a day and stored at 37°C for 24 hours. Digital photographs of each specimen were taken at each timepoint and transferred to a computer program for color analysis. The International Commission on Illumination L*a*b* system was used to analyze the color of the specimens at baseline and the overall color change (ΔE*) at baseline, 30 days, 60 days, and 90 days. Two-way analysis of variance was used to evaluate the influence of solution and time on ΔE* values (α = 0.05). The t test was used as a post hoc test to compare the mean values between groups (α = 0.05). After 30 days, all groups showed small color change values compared with baseline (ΔE*1 < 1.0). However, after 60 days, the LTC and CPI groups showed greater color change (ΔE*2) than the other groups, and the difference was statistically significant (P < 0.05). After 90 days, all groups differed significantly compared with the control group (P < 0.05), and all mouthwash groups presented color change values that are considered clinically unacceptable (ΔE*3 > 3.0). The results of this in vitro study indicate that mouthwash solutions do not cause significant color changes in nanohybrid composite resin for a period of up to 30 days; however, longer periods (90 days) of exposure could make the restorative material esthetically unacceptable.

Novel matrix formulation for resin composite: Chemical and biomechanical characterization - Part 1.

OBJECTIVE: This study aimed to investigate the effects of adding cholesteryl methacrylate (CM) monomer to experimental composite resins and evaluate its impact on polymerization shrinkage force (PSF), Knoop microhardness (KHN), sorption and solubility (SS), vulnerability to spontaneous oxidation (VOE), porosity (BES), viscosity (V), and cross-link density (CLD). CM was synthesized, mixed with varying proportions of Bis-GMA, 70 wt% filler particles, and 40 % TEGDMA. The groups tested were: CM0 (60 % Bis-GMA), CM6 (54 % Bis-GMA/6 % CM), CM12 (48 % Bis-GMA/12 % CM), CM18 (42 % Bis-GMA/18 % CM) and CM24 (36 % Bis-GMA/24 % CM). The PSF was evaluated using a universal testing machine. KHN was measured with a 50 g load for 30 s. SS was determined according to ISO 4049:2009. VOE was measured with a three-electrode system in an electrochemical cell. BES images were obtained using an electron microscope to assess porosity. Viscosity was measured through rheological analysis. CLD was estimated from hardness readings before and after ethanol storage. RESULTS: CM6 (0.34 N) and CM12 (0.34 N) exhibited the lowest PSF values compared to CM0 (0.91 N). For KHN, CM6 (32.03) and CM12 (31.03) had higher values than CM0 (25.83) and were similar to CM18 (29.39) and CM24 (28.64). SS showed no significant differences among the groups. VOE indicated low vulnerability across all groups. CM12 had greater porosity compared to CM0 in BES images. CM0 had the lowest viscosity among the groups. No differences in CLD were observed among CM0, CM12, CM18, and CM24 regarding softening effects. SIGNIFICANCE: Adding CM to Bis-GMA/TEGDMA composite resins can reduce polymerization shrinkage force and increase the initial Knoop microhardness without affecting the other properties studied.

In Vitro Effect of Luting Cement on Fracture Resistance of Primary Maxillary Central Incisors with Fiber Posts.

Objectives: The use of fiber posts in endodontically treated primary maxillary central incisors improves the retention of composite resin restorations. The purpose of this study was to evaluate the effect of 4 different luting cements on fracture resistance of primary maxillary central incisors with fiber posts. Materials and Methods: In this in vitro study, 40 primary maxillary central incisors were endodontically treated and obturated with Metapex. They were then randomly divided into four groups (n=10) for cementation of fiber posts with GC Fuji I glass ionomer luting cement, Panavia F2.0 dual-cure luting cement, Panavia SA Luting Plus cement (self-adhesive), and TotalCem self-adhesive cement. After 1000 thermal cycles, the fracture resistance was measured. Data were statistically analyzed using ANOVA (alpha=0.05). Results: The mean fracture resistance was 267.07±130.01N in TotalCem, 257.27±102.56N in Panavia F2.0 dual-cure cement, 227.82±110.40N in Panavia SA Luting Plus self-adhesive cement, and 220.89±59.96N in GC Fuji I glass ionomer group. There was no statistically significant difference in fracture resistance among the four groups (P=0.714). Conclusion: Type of luting cement had no significant effect on fracture resistance of primary maxillary central incisors with fiber posts. Nonetheless, TotalCem yielded the highest fracture resistance. Considering its self-adhesive property and easy workability, it can be a good option for cementation of fiber posts in endodontically treated primary central incisors.

Push-Out Bond Strength of Fiber Posts to Overflared Root Canals in Different Root Regions: Effect of Reinforcement Techniques.

Objectives: This study aimed to investigate the effect of different reinforcement techniques on the push-out bond strength of fiber posts to over-flared root canals. Materials and Methods: Forty-eight extracted human single-canal premolars were endodontically treated, over-flared, and randomly divided into four groups (N=12) including SARC: luting with self-adhesive resin cement, DCC: luting with dual-cure core build-up resin composite, CRR: relining root canal walls with bulk-fill resin composite, and DAP: relining fiber post with bulk-fill resin composite. After 24 hours, the roots were sectioned to obtain three cervical, middle, and apical 3mm slices. The push-out test was performed and failure pattern was examined. Kruskal-Wallis and post-hoc Dunn-Bonferroni tests were used for statistical analysis (P<0.05). Results: In all three regions, the lowest and highest bond strength was found in the SARC and DAP groups, respectively. In the middle region, there was a statistically significant difference between the bond strength of the SARC group and that of the DCC (P=0.044), CRR (P=0.021), and DAP (P<0.001) groups. There was no significant difference in the apical region. The lowest bond strength was observed in the apical region, and the highest was related to the cervical region. Adhesive failure was the most common failure pattern in all groups. Conclusion: Based on our results DCC, CRR and DAP methods increased bond strength in the middle and cervical sections of over-flared root regions. Considering that DCC is the easiest and most practical method, we propose that CRR and DAP can be replaced with this method in clinical procedures.

Effect of Lignosulphonates on the Moisture Resistance of Phenol-Formaldehyde Resins for Exterior Plywood.

Phenol-formaldehyde (PF) resins remain the preferred adhesive for exterior plywood, as they confer these boards their extreme weather resistance. However, their high price and toxicity has made phenol alternatives, such as technical lignins, increasingly more attractive. While many works report the use of kraft lignin, the most commercially available form are lignosulphonates (LS). However, these lack industrial success and are associated with low moisture resistance. In the current study, lignosulphonate-phenol-formaldehyde (LPF) resoles were synthesized considering a phenol replacement of 30% (w/w). Two LS samples of softwood (SLS) and hardwood (HLS) origin were compared. These samples were previously methylolated to increase their reactivity. The effectiveness of the treatment was confirmed through the Automated Bonding Evaluation System. Plywood was manufactured and tested according to EN 314 class 3 for exterior conditions, which is seldom found in the literature. Although a 35% increase in shear strength is still necessary to comply with the standard, methylolated SLS was the most promising substitute, as it resulted in the highest board performance. Notably, when this sample was used without previous methylolation, the plywood boards suffered delamination during immersion in boiling water prior to shear testing. These results reinforce the need for the methylolation of LS to increase the weather resistance of plywood.

Are physical and mechanical properties of 3D resins dependent on the manufacturing method?

This research analyzed the effect of the manufacturing method on the flexural strength and color stability of 3D-printed resins used for producing indirect restorations. For this, two dental restorative biocompatible resin materials, OnX (OnX, SprintRay) and CB (Crown and Bridge, Dentca), were divided into 2 groups according with manufacturing method (printed with a Pro95 3D printer - SprintRay; and not printed, with samples obtained with the fluid resin being poured on PVS molds for further light activation in the post-curing process), and subdivided into 2 groups according to the post-curing method: VG (Valo Grand, Ultradent Products) for 120 s and PC (Procure 2, SprintRay). Bar-shaped samples were used to evaluate the flexural strength 24 h after storage in distilled water at 37 °C using a universal testing machine. Disk-shaped samples were used to evaluate the color stability with a spectrophotometer at baseline, after 1-7 days in dark dry storage at 37 °C, and after 1 day of artificial aging in water at 60 °C. Data were evaluated using 3-way ANOVA (flexural strength) and 4-way repeated measures ANOVA (color stability), followed by the Tukey's HSD test (α = .05). Flexural strength showed significant results for resin (p < .001), while manufacturing and post-curing methods were not significant (p > .05). The interaction effects between resin and manufacturing method (p = .978), and between resin, manufacturing method and post-curing method (p = .659) were not significant. In general, OnX showed higher flexural strength values than CB, regardless of manufacturing method or post-curing protocol. Color stability results showed significant results for resin (p < .001), time (p < .001), resin and time (p = .029), and resin and curing method (p < .001), but no differences considering resin and manufacturing mode (p = .87), or resin, manufacturing method and curing method (p = .35). In general, OnX showed a higher color change than CB, longer storage times resulted in increased color change for both materials, and CB cured with VG showed lower color alteration than CB cured with PC2. The manufacturing method (3D printed or not 3D printed) does not seem to influence the flexural strength and color stability of 3D printed resins. This may indicate that, at least from a physical-mechanical perspective, the final properties of the material are mainly dependent on the post-curing process.

Characterization of experimental resin composites with cholesteryl methacrylate organic matrix - Part 2.

OBJECTIVE: The aim of this study was to evaluate the degree of conversion (%), flexural strength (MPa), elastic modulus (GPa), compressive strength (MPa), Knoop microhardness (KHN), post-gel shrinkage (%) and prediction of ideal concentration of cholesteryl methacrylate (CM) in experimental resins. METHODS: Four formulations were manipulated (F): F1, control group, (0 % CM); F2 (15 % CM); F3 (19.8 % CM) and F4 (30 % CM). Bis-GMA and CM percentages were determined using Statistica™ software. For the degree of conversion test, Raman spectroscopy was used. To testing flexural strength, elastic modulus and compressive strength, a universal testing machine was used. For the Knoop microhardness test five indentations were made in each sample. Post-gel shrinkage was determined using the strain gauge method. Statistica™ software processed all data obtained in this study. Results were submitted to one-way ANOVA and Tukey's post hoc tests (α = 0.05). RESULTS: Better performance was observed for F2 (15 % CM) and F3 (19,8 % CM) for degree of conversion, elastic modulus and post-gel shrinkage. For Knoop microhardness F2 (15 % CM), F3 (19,8 % CM) and F4 (30 % CM) showed higher values than F1 (0 % CM). For flexural strength F1 (0 % CM) and F3 (19,8 %) were similar and F4 showed the lowest values and for compressive strength F1 (0 % CM) showed the highest values. For mixture designs analysis data, concentrations ≤ 25 % of CM would provide better results. SIGNIFICANCE: Addition of CM at concentrations lower than 30 % contributed to a significant increase in the degree of conversion, microhardness values, elastic modulus and reduction of post-gel shrinkage.

Clinical Efficacy of a Novel Titania Nanoparticle-Reinforced Bonding Agent in Reducing Post-Restorative Sensitivity: A randomized clinical trial.

Objective: To evaluate the clinical efficacy of novel titania-nanoparticle reinforced bonding agent on post-restorative sensitivity in patients. Methods: This triple-blinded, randomized clinical trial included participants (n = 60) having Class- I and II cavitations with a minimum cavity depth of 3mm at Department of Operative Dentistry & Endodontics, School of Dentistry, Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad from January 5, 2023, to June 20, 2023. They were randomly assigned into two groups A and B (n = 30). After informed consent, restorative intervention was accomplished using an etch-and-rinse adhesive strategy. In Group-A, titania-nanoparticle-incorporated bonding agent was used for composite restoration, while in Group-B, bonding agent without nanoparticles was used. The primary outcome was assessed using Visual Analogue Scale mean score. Participants were instructed to rate their sensitivity status at follow-ups: 24 hours, one week, and one month. Mann-Whitney U test was employed to compare sensitivity between the two groups. Results: According to results of this trial, a significant difference was observed between two groups after 24 hours (p = 0.004) and one week (p = 0.002). However, no discernible difference was observed after one month (p = 0.643). Conclusion: Post-restorative sensitivity in patients with composite restorations was reduced using titania-reinforced bonding agents as compared to bonding agents without nanoparticles. This shows that inclusion of titania nanoparticles into adhesive dentistry could be beneficial in resolving post-restorative sensitivity occurring with composite restorations.

Influence of viscosity and fiber reinforcement of resin composite on fracture strength and failure mode of restored molars.

OBJECTIVE: To evaluate the fracture behavior of human molars with extensive MOD restorations using short-fiber-reinforced resin composite of varying viscosities. MATERIALS AND METHODS: Human molars were randomly divided into seven groups (n = 12): intact teeth (control); restoration using conventional high-viscosity resin composite without (Filtek Z350XT, 3M) or with fibers (everX Posterior, GC); conventional low-viscosity resin composite without (Filtek Supreme Flowable, 3M) or with fibers (everX Flow Dentin Shade, GC); bulk-fill low-viscosity resin composite (Filtek Bulk Fill Flow, 3M) or with fibers (everX Flow Bulk Shade, GC). Restorations were performed on extensive MOD preparations, following the manufacturers' recommendations for each material. Specimens underwent fracture strength testing (N) and fracture pattern (%) categorized as repairable, possibly repairable, or non-repairable. Results were analyzed using a generalized linear model (N) and Fisher's exact test (%), with α = 0.05. RESULTS: Restorations performed with high-viscosity materials showed fracture strength values similar to the control and higher than those of restorations using low-viscosity resin composites (p < 0.0001), except for the bulk-fill low-viscosity resin composite with fibers (p > 0.05). Teeth restored using low-viscosity resin composite with fibers showed a higher % of repairable and possibly repairable fractures than the control (p = 0.0091). CONCLUSIONS: The viscosity of materials mediated the fracture strength, with restorations using high-viscosity resin composites promoting values similar to the intact tooth; however, the presence of fibers influenced the fracture pattern. CLINICAL SIGNIFICANCE: Teeth with MOD cavities restored with high-viscosity resin composites showed similar fracture strength to intact teeth. Fiber-reinforced low-viscosity resin composite for the base of restoration resulted in a more repairable/possibly repairable fracture pattern.

Risk of Serious Adverse Gastrointestinal Events with Potassium Binders in Hospitalized Patients: A National Study.

BACKGROUND: Concerns about serious adverse gastrointestinal (GI) events with sodium polystyrene sulfonate (SPS) led to development of two new potassium binders, patiromer and sodium zirconium cyclosilicate (SZC), for treatment of hyperkalemia. OBJECTIVE: To compare risk of intestinal ischemia/thrombosis or other serious GI events associated with SPS, patiromer, or SZC in hospitalized patients. DESIGN: Retrospective cohort study. PARTICIPANTS: National sample of 3,144,960 veterans hospitalized 2016-2022 in the U.S. Department of Veterans Affairs Healthcare System. MAIN MEASURES: Demographics, comorbidities, medications and outcomes were ascertained from the VA Corporate Data Warehouse. Exposures were SPS, patiromer, SZC. Outcomes were 30-day intestinal ischemia/thrombosis, and a composite of intestinal ischemia/thrombosis, peptic ulcer/perforation or bowel resection/ostomy. KEY RESULTS: Potassium binders were used during 39,270 (1.3%) hospitalizations: SPS = 30,040 (1.0%), patiromer = 3,750 (0.1%), and SZC = 5,520 (0.2%). Intestinal ischemia/thrombosis occurred with 106/30,040 (0.4%) SPS, 12/3750 (0.3%) patiromer and 24/5520 (0.4%) SZC, vs. 6998/3,105,650 (0.2%) without potassium binder. Adjusted odds ratios (aOR) were 1.40 [95% CI, 1.16 to 1.69] with SPS, 1.36 [CI, 0.79 to 2.36] with patiromer, and 1.78 [CI, 1.21 to 2.63] with SZC exposures. Composite GI adverse events occurred with 754/30,040 (2.5%) SPS, 96/3750 (2.6%) patiromer, 2.6% SZC, vs. 144/5520 (2.4%) without binder; aOR were 1.00 [CI, 0.94 to 1.08] with SPS, 1.08 [CI, 0.89 to 1.32] with patiromer, and 1.08 [CI, 0.93 to 1.27] with SZC exposures. No statistical difference in intestinal ischemia/thrombosis between each new agent and SPS was seen (p = 0.274 for SPS vs. SZC; p = 0.916 for SPS vs. patiromer). CONCLUSION: Risk of intestinal ischemia/thrombosis or other serious adverse GI events was low and did not differ across three potassium-binding drugs.

Effect of laser irradiation during in-office tooth bleaching on surface properties of resin-based restorative materials.

This study evaluated the changes in surface properties of three resin-based restorative materials after two laser-assisted, in-office tooth bleaching protocols using erbium, chromium: yttrium-scandium-gallium-garnet (Er,Cr:YSGG) or diode (980 nm) lasers. A nanohybrid composite (Enamel Plus HRi), a Bis-GMA-free composite (Enamel Plus HRi Bio Function), and a resin-matrix CAD-CAM ceramic (Shofu Block HC) were tested. Forty specimens for each material were prepared and divided into four groups (n = 10/group). The control specimens did not undergo any bleaching treatment, whereas group 2 received bleaching with 40% hydrogen peroxide (H2O2), while groups 3 and 4 underwent the same bleaching procedure with the use of diode (980 nm) or Er,Cr:YSGG lasers, respectively. Surface microhardness and roughness measurements were conducted using a Vickers tester and an optical profilometer. Microhardness was lower in bleached specimens, with the nanohybrid composite exhibiting the largest difference from the no bleaching group. For the Bis-GMA-free composite the microhardness difference between no bleaching and laser-assisted bleaching were smaller than seen for the conventional bleaching technique. Surface roughness was higher in bleached specimens, with nanohybrid composite showing the largest differences from the control specimens. The examined laser-assisted tooth bleaching protocols were found not to impact surface microhardness and roughness of the tested resin-based specimens and they are deemed suitable for clinical use.

Comparison of various methods of restoring adhesion to recently bleached enamel.

AIM: This study compared the effectiveness of several techniques in restoring compromised bonding to recently bleached enamel. METHODS: Seventy-five healthy bovine incisors were divided into five groups (n = 15). Fifteen teeth (Group 1) remained intact, whereas 60 (Groups 2 to 5) underwent at-home bleaching with 16% carbamide peroxide. The bonding procedures were as follows: Group 1: Bonding of resin composite to unbleached enamel; Group 2: Bonding immediately after bleaching; Group 3: Application of a 10% sodium ascorbate solution for 10 min before bonding; Group 4: Enamel removal to the depth of 0.5 mm; and Group 5: Increased curing time of the bonding agent to 80 instead of 20 s. After 24 h, the specimens were subjected to micro-shear testing, and the failure mode was determined. RESULTS: ANOVA revealed a significant difference in bond strength among the groups (P < 0.001). The mean bond strength was significantly lower in group 2 than in other groups (P < 0.05), which showed comparable bond strength to each other (P > 0.05). Adhesive failure was the most predominant failure type in all groups. The mixed failure occurred with a frequency of 26.7% in groups 3 and 5. The Fisher's exact test revealed a significant difference in failure modes among the groups (P = 0.047). CONCLUSIONS: The three experimental procedures used in this study, including the application of 10% sodium ascorbate before bonding, enamel removal to the depth of 0.5 mm, and increasing the curing time of the bonding agent to 80 s, were effective in restoring the compromised bonding to recently bleached enamel.

Pre-Sealing of Endodontic Access Cavities for the Preservation of Anterior Teeth Fracture Resistance.

OBJECTIVE: Sodium hypochlorite solution (NaOCl) is an effective canal irrigant but interferes with the mechanical features of dentin and the bonding capability of adhesives when restoring endodontically treated teeth. This study evaluated whether access cavity resin sealing before using canal irrigant would augment the resistance of endodontically treated anterior teeth against fracture. METHODS: Sixty maxillary incisors underwent endodontic treatment in five groups (n = 12). Irrigation with 5.25% NaOCl and 17% ethylenediaminetetraacetic acid (EDTA) was performed in all groups except for Group 5. After root canal obturation, in Group 1, the access cavity was kept unrestored. In Group 2, immediate restoration after obturation was achieved. For Group 3, delayed restoration after 1 week was provided. In Group 4 (pre-sealed), before canal irrigation, the dentin surface of access cavities was sealed using self-adhesive composite resin (Vertise Flow) and then restored after obturation. In Group 5, which was saline irrigated, immediate restoration was performed. After storage and thermal cycling for 5000 cycles at 5°C-55°C with a dwell time of 15 s and a transfer time of 5 s, teeth were statically loaded by a universal testing machine until a fracture occurred. Data were collected as the fracture resistance (FR) and analyzed using the one-way analysis of variance and Tukey's tests. RESULTS: FR significantly differed between all groups (p < 0.001). The lowest FR was recorded in the unrestored group (284 ± 86 N), which was not statistically different from the immediately restored group (p = 0.065). The pre-sealed group exhibited the highest FR value (810 ± 127 N, p ≤ 0.02 vs. other groups). The FR of the saline-irrigated and delayed restored groups was almost similar (p = 0.13). CONCLUSIONS: NaOCl/EDTA irrigation resulted in an adverse effect on FR. Delayed restoration could reduce this adverse effect. Access cavity pre-sealing with flowable composites led to a higher FR than conventional methods and may be considered an effective step during treatment procedures.

Micro-Computed Tomography Analysis of Resin and Calcium Silicate Based Sealers Removal in Mandibular Molars Curved Canals.

Objective: The removal of the root canal sealer is an important factor in nonsurgical retreatment. The aim of this study was to compare the removal of AH Plus, Well Root ST, and AH Plus Bioceramic Sealer using Protaper Universal retreatment files. Methods: The curved mesio-buccal canals of extracted mandibular molars were prepared with the Protaper Gold file system (up to F2). Specimens were randomly divided into 3 groups and filled with the single cone technique using AH Plus, Well-Root ST, and AH Plus Bioceramic Sealer, respectively. After two weeks, the root canal filling of all specimens was removed using Protaper Universal retreatment files. All specimens were scanned using micro-CT. The remaining volume of the root canal filling was recorded in total and the coronal, middle, and apical third of each specimen. Results: Well-Root ST and AH Plus Bioceramic Sealer groups had a higher percentage of total remaining filling material than the AH Plus group (P<0.05). Conclusion: This study has shown that the volume of remaining root canal filling was significantly higher in the samples filled with calcium silicate-based sealers.

Thickness Variations of Thermoformed and 3D-Printed Clear Aligners.

Objective: To assess thickness variations of thermoformed and 3D-printed clear aligners. Materials and Methods: Six different thermoplastic materials with different initial thicknesses were used for aligner thermoforming using Biostar® device (Biostar®, SCHEU-DENTAL GmbH, Iserlohn, Germany). Also, two different dental resins were used to create the printed aligners in three digitally designed thicknesses using IZZI Direct printer (3Dtech, Zagreb, Croatia). The aligners were measured using an electronic micrometer (ELECTRONIC UNIVERSAL MICROMETER, Schut Geometrical Metrology, Groningen, The Netherlands, accuracy: 0.001 mm) on a total of 20 points per aligner. Statistical analysis was performed using the JASP program (JASP, University of Amsterdam, Amsterdam, The Netherlands). Results: The difference between the thermoformed and printed groups was statistically significant. Significant differences between different thermoformed materials and between 3D-printed materials were found. The thickness of thermoformed aligners deviated more in the upper jaw, whereas the thickness of printed aligners deviated more in the lower jaw. Both differences were statistically significant. The greatest average deviation from the initial thickness was found in Duran 0.75; Erkodur 0.6; Erkoloc-Pro 1.0; IZZI 0.5; NextDent 0.6 and NextDent A 0.6. NextDent group had the lowest deviations for all teeth of both jaws, except for upper and lower first molar where NextDent A group was more accurate. Conclusions: Thermoformed aligners showed decreased values, while printed ones showed mostly increased values compared to the original material thickness. The highest mean deviation belonged to IZZI group, and the NextDent group had the lowest mean deviation. The thickness of both aligners was thinner at the edges compared to the thickness at cusps and fissures.

The color-matching ability of single-shade universal composites in extracted human teeth.

OBJECTIVES: To evaluate the color-match with extracted natural teeth of three single-shade universal composites, a group-shade universal composite, and a highly translucent-shade conventional composite. METHODS: Twenty extracted human teeth were divided into light- and dark-shade groups (n = 10, LSG and DSG). A preparation was restored with the 3 single-shade universal composites, OMNICHROMA (OMC), Admira Fusion x-tra U (AFU), and Essentia U (ESU); a highly translucent-shade conventional composite, Tetric EvoCeram T (TEC-T); and two shades of a group-shade universal composite-Filtek Universal Restorative (FUR A1 and A4). Composites were photopolymerized, polished, and stored in water for 24 h. The ΔE00 value between the unprepared and restored surfaces was obtained using a spectrophotometer. Composite placement and measurements were repeated three times per tooth. Color differences were statistically analyzed with the within-between-subjects t-test and repeated-measures analysis of variance (ANOVA), followed by post hoc pairwise comparisons with a Bonferroni adjustment (α = 0.05). RESULTS: There were no statistically significant differences between OMC and FUR (A1 and A4). AFU and ESU showed significantly higher ΔE00 values than OMC and TEC-T (p < 0.05). Single-shade composites exhibited significantly higher ΔE00 values in the DSG than in the LSG except ESU (p < 0.05). None of the composites satisfied the criteria for an acceptable match (ΔE00 >1.8). CONCLUSION: OMC showed the same color matching ability as a group-shade universal composite. A highly translucent-shade conventional composite and OMC exhibited better color matching ability than other single-shade composites. Overall, single-shade universal composites performed better in lighter-shaded teeth. CLINICAL SIGNIFICANCE: Single-shade universal composites have the potential to reduce chair time by eliminating shade selection in cavities with lighter-shade teeth. Highly translucent incisal conventional composites also may be used if the appropriate shade of composite is not available.

[Surface roughness of two composite resins after immersion in soda drinks: in vitro study]. / Rugosidad superficial de dos resinas compuestas después de la inmersión en bebidas gaseosas: estudio in vitro.

Objective: Compare the surface roughness of two composite resins after immersion in carbonated beverages. Materials and methods: 160 resin discs (6 x 2 mm) were divided into 8 groups (n=20 per group) according to type of resin (Filtek™ Z350 XT® and Palfique LX5®) and type of immersion in beverages (distilled water, Coca Cola®, Inca Kola® and Kola Escocesa®. The immersions were carried out under a structured cycle: 4 immersions a day for 5 days, intermediate storage in distilled water and overnight incubation for 8 h at 37°C. The measurements with the roughness meter were evaluated in three times: baseline, 7 and 14 days. The three-way Anova test was used at P<0.05. Results: Roughness showed differences only for the individual factors of time (P<0.000) and resin (P=0.000), and for the interaction time*drink (P=0.000) and resin*drink (P=0.003). Roughness was higher with Filtek Z350 XT® immersed with Inca Kola® (0.85 ± 0.37) than 14 days compared to other times (P=0.035) and with Palfique LX5 immersed in Coca Cola® at 7 days (1.61 ± 0.42) and in Inca Kola® at 14 days (1.66 ± 0.56) compared to distilled water (P<0,05). Conclusion: Surface roughness was affected by the type of resin, the type of soft drink and the immersion time. The roughness was greater with the Palfique LX5® nanohybrid resin, the Inca Kola® drink and after 14 days of immersion.

Oral and Extra-Oral Manifestations of Hypersensitivity Reactions in Orthodontics: A Comprehensive Review.

Although rare, oral manifestations of hypersensitivity reactions in orthodontic patients pose a significant clinical challenge due to their heterogeneous presentations, and can cause discomfort and pain, possibly impacting patients' quality of life and orthodontic treatment duration and outcomes. This comprehensive review aimed to elucidate the oral, perioral, and systemic manifestations of hypersensitivity reactions in orthodontic subjects, focusing on patients with fixed appliances, removable appliances, and clear aligners, and detailing their epidemiology, macroscopic and microscopic features, allergy testing, clinical implications, and specific management strategies. Oral and extra-oral manifestations of (immediate and delayed) hypersensitivity reactions occur rarely and are due to the release of metal and non-metal ions from orthodontic appliances. They typically present as erythema, erosive-ulcerative lesions, and gingival hyperplasia, with histopathological findings showing inflammatory infiltrates. Nickel is a significant allergen, and diagnostic tests like patch tests are essential for managing these reactions. Likely due to prolonged contact with oral tissues, fixed orthodontic appliances pose a higher risk compared to removable appliances and clear aligners. Early identification and removal of allergenic materials, combined with effective treatments, can resolve symptoms and prevent recurrence. Keeping dental and medical records updated and knowing family and personal medical histories helps clinicians choose appropriate materials and counsel patients about potential risks. Proper patient education, regular monitoring, and using hypoallergenic materials are key strategies for managing these reactions.

Comparative Evaluation of Mechanical Properties and Color Stability of Dental Resin Composites for Chairside Provisional Restorations.

Resin composites have become the preferred choice for chairside provisional dental restorations. However, these materials may undergo discoloration, changes in surface roughness, and mechanical properties with aging in the oral cavity, compromising the aesthetics, functionality, and success of dental restorations. To investigate the color and mechanical stability of chairside provisional composite resins, this study evaluated the optical, surface, and mechanical properties of four temporary restoration resin materials before and after aging, stimulated by thermal cycling in double-distilled water. Measurements, including CIE LAB color analysis, three-point bending test, nanoindentation, scanning electron microscopy (SEM), and atomic force microscopy (AFM), were conducted (n = 15). Results showed significant differences among the materials in terms of optical, surface, and mechanical properties. Revotek LC (urethane dimethacrylate) demonstrated excellent color stability (ΔE00 = 0.53-Black/0.32-White), while Artificial Teeth Resin (polymethyl methacrylate) exhibited increased mechanical strength with aging (p < 0.05, FS = 68.40 MPa-non aging/87.21 MPa-aging). Structur 2 SC (Bis-acrylic) and Luxatemp automix plus (methyl methacrylate bis-acrylate) demonstrated moderate stability in optical and mechanical properties (Structur 2 SC: ΔE00 = 1.97-Black/1.38-White FS = 63.20 MPa-non aging/50.07 MPa-aging) (Luxatemp automix plus: ΔE00 = 2.49-Black/1.77-White FS = 87.72 MPa-non aging/83.93 MPa-aging). These results provide important practical guidance for clinical practitioners, as well as significant theoretical and experimental bases for the selection of restorative composite resins.