Encapsulation of Lactiplantibacillus plantarum with casein-gellan gum emulsions to enhance its storage, pasteurization, and gastrointestinal survival.

Probiotics serve a very important role in human health. However, probiotics have poor stability during processing, storage, and gastrointestinal digestion. The gellan gum (GG) is less susceptible to enzymatic degradation and resistant to thermal and acidic environments. This study investigated the effect of casein (CS)-GG emulsions to encapsulate Lactiplantibacillus plantarum CICC 6002 (L. plantarum CICC 6002) on its storage stability, thermal stability, and gastrointestinal digestion. L. plantarum CICC 6002 was suspended in palm oil and emulsions were prepared using CS or CS-GG complexes. We found the CS-GG emulsions improved the viability of L. plantarum CICC 6002 after storage, pasteurization, and digestion compared to the CS emulsions. In addition, we investigated the influence of the gellan gum concentration on emulsion stability, and the optimal stability was observed in the emulsion prepared by CS-0.8% GG complex. This study provided a new strategy for the protection of probiotics based on CS-GG delivery system.

Cu/TiO2 adsorbents modified by air plasma for adsorption-oxidation of H2S.

In this study, non-thermal plasma (NTP) was employed to modify the Cu/TiO2 adsorbent to efficiently purify H2S in low-temperature and micro-oxygen environments. The effects of Cu loading amounts and atmospheres of NTP treatment on the adsorption-oxidation performance of the adsorbents were investigated. The NTP modification successfully boosted the H2S removal capacity to varying degrees, and the optimized adsorbent treated by air plasma (Cu/TiO2-Air) attained the best H2S breakthrough capacity of 113.29 mg H2S/gadsorbent, which was almost 5 times higher than that of the adsorbent without NTP modification. Further studies demonstrated that the superior performance of Cu/TiO2-Air was attributed to increased mesoporous volume, more exposure of active sites (CuO) and functional groups (amino groups and hydroxyl groups), enhanced Ti-O-Cu interaction, and the favorable ratio of active oxygen species. Additionally, the X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) results indicated the main reason for the deactivation was the consumption of the active components (CuO) and the agglomeration of reaction products (CuS and SO42-) occupying the active sites on the surface and the inner pores of the adsorbents.

Source and variability of formaldehyde in the Fenwei Plain: An integrated multi-source satellite and emission inventory study.

Formaldehyde (HCHO) is a high-yield product of the oxidation of volatile organic compounds (VOCs) released by anthropogenic activities, fires, and vegetations. Hence, we examined the spatiotemporal variation trends in HCHO columns observed using the Ozone Monitoring Instrument (OMI) during 2005-2021 across the Fenwei Plain (FWP) and analysed the source and variability of HCHO using multi-source data, such as thermal anomalies. The spatial distribution of the annual mean HCHO in the FWP increased from northwest to southeast during 2005-2021, and the high-value aggregation areas contracted and gradually clustered, forming a belt-shaped distribution area from Xi'an to Baoji, north of the Qinling Mountains. The annual mean HCHO concentration generally showed a two-step increase over the 17 years. Fires showed a single-peak trend in March and a double-peak M-shaped trend in March and October, whereas urban thermal anomalies (UTAs) showed an inverted U-shaped trend over 17 years, with peaks occurring in May. The HCHO peaks are mainly caused by the alternating contributions of fires and UTAs. The fires and UTAs (predominantly industrial heat sources) played a role in controlling the background level of HCHO in the FWP. Precipitation and temperature were also important influencing variables for seasonal variations, and the influence of plant sources on HCHO concentrations had significant regional characteristics and contributions. In addition, the FWP has poor dispersion conditions and is an aggregated area for the long-range transport of air pollutants.

Comparative proteomic analysis of donor human milk treated by high-pressure processing or Holder pasteurization on undigested proteins across dynamic simulated preterm infant digestion.

High-pressure processing (HPP) of donor human milk (DM) minimally impacts the concentration and bioactivity of some important bioactive proteins including lactoferrin, and bile salt-stimulated lipase (BSSL) compared to Holder pasteurization (HoP), yet the impact of HPP and subsequent digestion on the full array of proteins detectable by proteomics remains unclear. We investigated how HPP impacts undigested proteins in DM post-processing and across digestion by proteomic analysis. Each pool of milk (n = 3) remained raw, or was treated by HPP (500 MPa, 10 min) or HoP (62.5 °C, 30 min), and underwent dynamic in vitro digestion simulating the preterm infant. In the meal, major proteins were minimally changed post-processing. HPP-treated milk proteins better resisted proximal digestion (except for immunoglobulins, jejunum 180 min) and the extent of undigested proteins after gastric digestion of major proteins in HPP-treated milk was more similar to raw (e.g., BSSL, lactoferrin, macrophage-receptor-1, CD14, complement-c3/c4, xanthine dehydrogenase) than HoP.

A review of functions and mechanisms of clay soil conditioners and catalysts in thermal remediation compared to emerging photo-thermal catalysis.

High temperatures and providing sufficient time for the thermal desorption of persistent organic pollutants (POPs) from contaminated clay soils can lead to intensive energy consumption. Therefore, this article provides a critical review of the potential additives which can improve soil texture and increase the volatility of POPs, and then discusses their enhanced mechanisms for contributing to a green economy. Ca-based additives have been used to reduce plasticity of bentonite clay, absorb water and replenish system heat. In contrast, non-Ca-based additives have been used to decrease the plasticity of kaolin clay. The soil structure and soil plasticity can be changed through cation exchange and flocculation processes. The transition metal oxides and alkali metal oxides can be applied to catalyze and oxidize polycyclic aromatic hydrocarbons, petroleum and emerging contaminants. In this system, reactive oxygen species (•O2- and •OH) are generated from thermal excitation without strong chemical oxidants. Moreover, multiple active ingredients in recycled solid wastes can be controlled to reduce soil plasticity and enhance thermal catalysis. Alternatively, the alkali, nano zero-valent iron and nano-TiN can catalyze hydrodechlorination of POPs under reductive conditions. Especially, photo and photo-thermal catalysis are discussed to accelerate replacement of fossil fuels by renewable energy in thermal remediation.

In situ DRIFTs-based comprehensive reaction mechanism of photo-thermal synergetic catalysis for dry reforming of methane over Ru-CeO2 catalyst.

Solar-driven photo-thermal dry reforming of methane (DRM) is an environmentally friendly production route for high-value-added chemicals. However, the lack of thorough understanding of the mechanism for photo-thermal reaction has limited its further development. Here, we systematically investigated the mechanism of photo-thermal DRM reaction with the representative of Ru/CeO2 catalyst. Through in situ DRIFTs and transient experiments, comprehensive investigation into the reaction steps and their reactive sites in the process of DRM reaction were conducted. Besides, the excitation and migration direction of photo-electron was determined by ISI-XPS experiments, and the change of surface defect structure induced by light was characterized by ISI-EPR experiments. Based on the above results, the photo-enhancement effect on each micro-reaction step was determined. This study provides a theoretical basis for the industrialization of photo-thermal DRM reaction and its development of catalysts.

Alternative splicing dynamically regulates common carp embryogenesis under thermal stress.

BACKGROUND: Thermal stress is a major environmental factor affecting fish development and survival. Common carp (Cyprinus carpio) are susceptible to heat stress in their embryonic and larval phases, but the thermal stress response of alternative splicing during common carp embryogenesis remains poorly understood. RESULTS: Using RNA-seq data from eight developmental stages and four temperatures, we constructed a comprehensive profile of alternative splicing (AS) during the embryogenesis of common carp, and found that AS genes and events are widely distributed among all stages. A total of 5,835 developmental stage-specific AS (SAS) genes, 21,368 temperature-specific differentially expressed genes (TDEGs), and 2,652 temperature-specific differentially AS (TDAS) genes were identified. Hub TDAS genes in each developmental stage, such as taf2, hnrnpa1, and drg2, were identified through protein-protein interaction (PPI) network analysis. The early developmental stages may be more sensitive to temperature, with thermal stress leading to a massive increase in the number of expressed transcripts, TDEGs, and TDAS genes in the morula stage, followed by the gastrula stage. GO and KEGG analyses showed that from the morula stage to the neurula stage, TDAS genes were more involved in intracellular transport, protein modification, and localization processes, while from the optic vesicle stage to one day post-hatching, they participated more in biosynthetic processes. Further subgenomic analysis revealed that the number of AS genes and events in subgenome B was generally higher than that in subgenome A, and the homologous AS genes were significantly enriched in basic life activity pathways, such as mTOR signaling pathway, p53 signaling pathway, and MAPK signaling pathway. Additionally, lncRNAs can play a regulatory role in the response to thermal stress by targeting AS genes such as lmnl3, affecting biological processes such as apoptosis and axon guidance. CONCLUSIONS: In short, thermal stress can affect alternative splicing regulation during common carp embryogenesis at multiple levels. Our work complemented some gaps in the study of alternative splicing at both levels of embryogenesis and thermal stress in C. carpio and contributed to the comprehension of environmental adaptation formation in polyploid fishes during embryogenesis.

Expansivity of Fused Quartz Glass Measured Within 6 × 10-10 K-1.

A method is described to measure the thermal expansion coefficient of fused quartz glass. The measurement principle is to monitor the change in resonance frequency of a Fabry-Perot cavity as its temperature changes; the Fabry-Perot cavity is made from fused quartz glass. The standard uncertainty in the measurement was less than 0.6 (nm·m-1)·K-1, or 0.15 %. The limit on performance is arguably uncertainty in the reflection phase-shift temperature dependence, because neither thermooptic nor thermal expansion coefficients of thin-film coatings are reliably known. However, several other uncertainty contributors are at the same level of magnitude, and so any improvement in performance would entail significant effort. Furthermore, measurements of three different samples revealed that material inhomogeneity leads to differences in the effective thermal expansion coefficient of fused quartz; inhomogeneity in thermal expansion among samples is 24 times larger than the measurement uncertainty in a single sample.

3D Numerical Simulation for Thermal Protection of Phase Change Material-Integrated Firefighters' Turnout Gear.

This work aims to investigate and develop a novel phase change material (PCM)-integrated firefighters' turnout gear technology that would significantly enhance the thermal protection of firefighters' bodies from thermal burn injuries under high-heat conditions (such as in fire scenes). This work established a 3D human thermal simulation to explore the thermal protection improvements of firefighters' turnout gear by using PCM segments under flashover and hazardous conditions. This simulation study will guide future experimental design and testing effectively and save time and effort. The study found that the 3.0-mm-thick PCM segments with a melting temperature of 60°C could extend the thermal protection time for skin surface to reach second-degree burn injury (60°C) by one to three times under flashover conditions compared to the turnout gear without PCM. Moreover, thinner PCM segments, i.e., 1.0-3.0 mm thickness, could also significantly mitigate the skin surface temperature increase while avoiding the added weight on the turnout gear. The 3D modelling results can be used to develop a next-generation firefighter turnout gear technology.

Multicenter Integration of MR Radiomics, Deep Learning, and Clinical Indicators for Predicting Hepatocellular Carcinoma Recurrence After Thermal Ablation.

Background: To develop and validate an innovative predictive model that integrates multisequence magnetic resonance (MR) radiomics, deep learning features, and clinical indicators to accurately predict the recurrence of hepatocellular carcinoma (HCC) after thermal ablation. Methods: This retrospective multicenter cohort study enrolled patients who were diagnosed with HCC and treated via thermal ablation. We extracted radiomic features from multisequence 3T MR images, analyzed these images using a 3D convolutional neural network (3D CNN), and incorporated clinical data into the model. Model performance was evaluated using the area under the curve (AUC) of the receiver operating characteristic (ROC) curve. Results: The study included 535 patients from three hospitals, comprising 462 males and 43 females. The RDC model, which stands for the Radiomics-Deep Learning-Clinical data model, demonstrated high predictive accuracy, achieving AUCs of 0.794 in the training set, 0.777 in the validation set, and 0.787 in the test set. Statistical analysis confirmed the model's robustness and the significant contribution of the integrated features to its predictive capabilities. Conclusion: The RDC model effectively predicts HCC recurrence after thermal ablation by synergistically combining advanced imaging analysis and clinical parameters. This study highlights the potential of such integrative approaches to enhance prognostic assessments in HCC patients and offers a promising tool for clinical decision-making.

Phonon Transport in Supramolecular Polymers Regulated by Hydrogen Bonds.

Supramolecular polymers hold promise in thermal management applications due to their multistability, high responsiveness, and cost-effectiveness. In this work, we successfully regulate phonon transport at the molecular level in supramolecular polymers by adjusting the strength of intermolecular hydrogen bonding. We synthesized three supramolecular polymer fibers with thermal conductivity differences of up to 289% based on melamine (M) and three simple positional isomers of hydroxybenzoic acid. Differential Scanning Calorimetry (DSC) measurement revealed discrepancies in thermal stability of the polymers, where structures with higher stability exhibited enhanced thermal conductivity. Fourier Transform Infrared Spectroscopy (FTIR) measurement and Density Functional Theory (DFT) calculations indicate that these differences arise from variations in hydrogen-bonding strengths at different bonding sites. Higher hydrogen-bonding strength leads to more stable thermal pathways, reduces phonon scattering, and increases thermal conductivity. Our findings provide valuable insights into controlling the thermal conductivity of polymer fibers, paving the way for applications in phonon-based thermal devices.

Mechanistic basis for a single amino acid residue mutation causing human DNA ligase 1 deficiency, a rare pediatric disease.

In mammalian cells, DNA ligase 1 (LIG1) functions as the primary DNA ligase in both genomic replication and single-strand break repair. Several reported mutations in human LIG1, including R305Q, R641L, and R771W, cause LIG1 syndrome, a primary immunodeficiency. While the R641L and R771W mutations, respectively located in the nucleotidyl transferase and oligonucleotide binding domains, have been biochemically characterized and shown to reduce catalytic efficiency, the recently reported R305Q mutation within the DNA binding domain (DBD) remains mechanistically unexplored. The R641L and R771W mutations are known to decrease the catalytic activity of LIG1 by affecting both interdomain interactions and DNA binding during catalysis, without significantly impacting overall DNA affinity. To elucidate the molecular basis of the LIG1 syndrome-causing R305Q mutation, we purified this single-residue mutant protein and investigated its secondary structure, protein stability, DNA binding affinity, and catalytic efficiency. Our findings reveal that the R305Q mutation significantly impairs the function of LIG1 by disrupting the DBD-DNA interactions, leading to a 7 to 21-fold lower DNA binding affinity and a 33 to 300-fold reduced catalytic efficiency of LIG1. Additionally, the R305Q mutation slightly decreases LIG1's protein stability by 2 to 3.6 °C, on par with the effect observed previously with either the R641L or R771W mutant. Collectively, our results uncover a new mechanism whereby the R305Q mutation impairs LIG1-catalyzed nicked DNA ligation, resulting in LIG1 syndrome, and highlight the crucial roles of the DBD-DNA interactions in tight DNA binding and efficient LIG1 catalysis.

3D Printed Leaf-Vein-Like Al2O3/EP Biohybrid Structures with Enhanced Thermal Conductivity.

The high computility of electronic components put urgent requirements on the dissipation efficiency of a high thermal conductive substrate. Herein, inspired by the nature structure, leaf-vein-like Al2O3 skeleton was first designed though topology optimization algorithm and manufactured via vat photopolymerization (VPP) 3D printing, then compounded with epoxy (EP) to prepare leaf-vein-like biohybrid structures. The biohybrid structure had a high λ (14.65 Wm-1 K-1 with the solid fraction of 40 vol %), which was 5585% higher than neat EP and 269% higher than the random dispersed Al2O3/EP composite at the same solid amount. Moreover, it further showed a high enhancement in the cooling ecoefficiency of the lighting-emitting diode (LED) cooling system. Compared with 40 vol % random dispersed Al2O3/EP composite as a cooling substrate, the leaf-vein-like biohybrid structure with the same solid fraction reduced the working temperature of LED by 8.9 °C. Our strategy has a significant potential as a viable type and mass-producible bionic cooling substrate.

Experimental study under thermal shock environment to investigate effect of welding width on properties of ultrasonically welded joints of multiple copper cables.

Based on the ultrasonic welding technology, this study uses three different welding widths to weld copper cables with different specifications. The influence of welding width on the mechanical properties and microstructure of each group of welded joints was systematically studied for the first time. The thermal shock test was carried out for each group of welded joints under optimum welding width to simulate the influence of severe temperature change environment on joint performance. It is found that the cross-sectional area of joint is 20 mm2 and optimal welding width of joint composed of two and three cables is 7 mm. The optimal welding temperature of the joint composed of four cables is 5 mm. Under the optimal welding width, the average shear strength of two-cable joint reaches 309.4 N. The four-cable joint is only 232.2 N. Moreover, the welding strength weakens significantly as the number of cables and the peak temperature decreases. The high temperature of bonding interface is the key factor to form a good weld. The peak temperature during welding is negatively correlated with the porosity of joint and positively correlated with peeling strength of joint. In addition, the morphology of ultrasonically welded joints has changed obviously after thermal shock test. With the participation of oxygen, the surface of welded joint is gray and bright brass, while the interior of joint is purple due to lack of oxygen. Moreover, the phenomenon of atomic diffusion and thermal expansion generates joints which were initially in a mechanically interlocked form and welding interface of the metallurgical bond under the action of high temperature. So the maximum joint peel strength is slightly improved.

Repeated γ irradiation and thermal annealing via built-in thermo-electric coolers of Si avalanche photodiodes.

When operating in space, on-board Silicon Geiger-Mode Avalanche Photodiodes (GM-APDs) are exposed to radiation damage that result in an increase in dark count rates. Thermal annealing has been found to mitigate the damage, although prior studies have largely focused on annealing following a single session of proton irradiation. This work reports that thermal annealing can be performed simply with the built-in thermo-electric coolers of the GM-APDs. Annealing was also done in 10 min intervals for a clearer view of the recovery curve. Mitigation of damage from repeated γ radiation was observed from the: (1) halving of the increase in dark count rates on average and (2) outperformance of room temperature annealing ( 25 ∘ C) by 33 % . Additionally, we show that heavy doses of γ radiation (21 krad) have a probability of causing Random Telegraph Signals in GM-APDs that can be suppressed by lowering the operating temperature.

Non-thermal plasma enhances growth and salinity tolerance of bok choy (Brassica rapa subsp. chinensis) in hydroponic culture.

In this study, we aimed to examine the growth, physiological and biochemical status, and responses to salinity stress of bok choy (Brassica rapa subsp. chinensis) cultivated in a hydroponic system with a plasma-treated solution. Plasma gas generated using a cylindrical dielectric barrier discharge or air (control) was injected into Hoagland nutrient solution once a week for different durations (0, 5, and 10 min). After 4 weeks, the length of the shoots and roots, number of leaves, and dry weight of bok choy plants significantly increased in individuals grown with Hoagland solution treated with plasma gas for 10 min. An increase in dry weight of individual plants of approximately 80.5% was observed in plants in the plasma-treated group compared to those in a control group. The levels of chlorophyll, total soluble proteins, and nitrogen uptake, and transcription of genes related to salinity stress tolerance-WRKY2, HHP3, and ABI1- were also significantly elevated in bok choy grown with plasma treated Hoagland solution. Moreover, when exposed to 20 mM NaCl, plant length and leaf number were significantly increased, in the group grown with Hoagland solution treated with plasma gas for 10 min. Level of H2O2 was significantly elevated in the treated nutrient solutions. In plants grown with the treated nutrient solution, intracellular NO was highly detected in the cell division and elongation zone of roots. Our findings suggest that plasma treatment of nutrient solutions in hydroponic culture systems may improve the growth, physiological and biochemical status, and tolerance to salinity stress in plants, and a crucial role of H2O2 generated in the treated nutrient solutions may play in this improvement.

A Double-Anonymised Histopathological Comparative Study of CO2 Laser and Coblation in Head and Neck Surgery.

CO2 Laser and Coblation are widely used in Head and neck Surgeries. This study compares the tissue changes produced by these two techniques. 50 Patients who underwent complete excision of benign and malignant pathologies in the Oral Cavity, Oropharynx, and Larynx with Coblation and CO2 Laser were included in the study. The primary excised specimen and another separate specimen from the base of the excised lesion were evaluated histologically based on criteria by Vescovi et al. (1). On histopathological examination, thermal effects (epithelial, connective tissue and vascular) produced by both techniques were comparable. However vascular changes were seen more in tissues CO2 Laser (P = 0.727). Incision margins were more regular in the CO2 Laser group (73%) than in Coblation (55%) but not statistically significant (P = 1.80). Depth of thermal damage (P = 0.171) and connective tissue changes(P = 0.279) was more with Coblation. Both Coblation and CO2 Laser can be used effectively in Head and Neck cases. CO2 Laser, when available, is a better option because of its precise excision, and less collateral tissue damage.

Application of hot water and cold air to reduce bacterial contamination on broiler carcasses.

Two physical treatments (heat via water bath and cold air) with various temperatures (20/70/75/80°C and - 80/-90°C) and exposure times (20, 30, 40 s) were carried out to identify a decontaminating effect on zoonotic pathogens on broiler carcasses. Subsequently, carcasses were analyzed for thermotolerant Campylobacter (C.), Salmonella, Escherichia (E.). coli and total colony count (TCC). Moreover, for the hot water treatment, qPCR with viable/dead differentiation (v-qPCR) was applied to detect viable but non-culturable cells (VBNC) of Campylobacter, referred to as intact but putatively infectious units (IPIU). Hot water immersion was tested on carcasses inoculated with C. jejuni and Salmonella, while cold air treatment was evaluated for naturally contaminated carcasses of broiler flocks colonized with Campylobacter. For hot water treatment, the statistically significant reducing effect was about 1 log10 CFU/ml for both Salmonella and Campylobacter for 70-80°C and 20/30 s treatments. The effect of heat treatment for Campylobacter was smaller when samples were analyzed with v-qPCR with reductions of 0.5-0.8 log10 IPIU/ml in mean. Cold air treatments at -90°C were effective in reducing the mean contamination level of Campylobacter by 0.4-0.5 log10 CFU/ml at all exposure times (p < 0.05). Hot water treatments showed a decreasing trend on TCC by 0.6-0.9 log10 CFU/ml (p < 0.05). TCC counts were not significantly affected by cold air treatment. For E. coli no statistically significant reductions were observed by hot water treatment. The cold air treatment at -90°C for 20 and 40 s led to a reduction of E. coli by 0.4 and 0.8 log10 CFU/ml (p < 0.05), respectively. Treatment of carcasses with higher bacterial levels tended to show higher reduction. The research demonstrated that the efficacy of physical treatments for decontamination of broiler carcasses was more pronounced for hot water immersion than for cold air exposure. In conclusion, the results shed light on the potential application of these physical treatments in practice to reduce the quantitative load of contaminating pathogens to enhance food safety in the broiler meat production.

In ovo betaine and heat acclimation affect hatching results, growth performance and immunity of the broilers under cyclic heat stress.

This study investigated the effects of in ovo betaine and thermal manipulation during incubation on growth performance, and some immune parameters of broilers under cyclic heat stress (CHS). Eggs were divided into 5 groups and incubated at 1) 37.8 °C and 60% relative humidity (Control incubation and not-injected, CI); 2) eggs were incubated at CI and in ovo betaine injected into yolk sac on d 11 (E11) (CI + In ovo); 3) eggs were exposed to 38.8 °C for 8 h between 10 and 18d of incubation (heat acclimation, HA); 4) eggs were incubated at HA and in ovo betaine applied (HA + In ovo); 5) positive control: eggs were incubated at CI and injected with saline. Hatched chicks were raised under standard management conditions until 21 d, between 21 and 42 d half of the chickens in each incubation treatment were kept either at optimum (OPT) or at CHS. In ovo and HA did not affect hatching performance. In ovo increased thymus and spleen weights of chicks. Serum IgG was higher in HA + In ovo chicks. From d 7 to 21, in ovo chicks were heavier body weights, consumed more feed, and better feed conversion than those from CI. The body weights of HA chickens were similar in OPT and CHS on d 28 and 35. CHS reduced the body weight of CI chickens which was compatible with their feed consumption. Moreover, feed intake of HA + In ovo chickens exposed to CHS was higher than those not injected indicating that HA + In ovo enhanced thermoregulation of chickens under CHS.