Effects of Dentifrices With Antierosive Potential on the Surface of Bovine Enamel Submitted to Acidic Beverage.

OBJECTIVES: To evaluate the effects of dentifrices containing sodium fluoride (NaF) combined with NovaMin (Sensodyne Repair & Protect-SRP), NaF combined with stannous fluoride (SnF2, Oral-B Pro-Gengiva-OBP), and amine fluoride (AmF, Colgate Elmex-ELM) on enamel subjected to simulated erosive cycling. MATERIALS AND METHODS: Bovine enamel-dentin discs (n = 10/group) were subjected to erosive cycling with orange juice (pH = 3.29, 5 min, 3x/day), artificial saliva (SA-2 h, 3x/day and overnight) and treated with dentifrice (2 min, 2x/day) or without treatment (CONT). Surface microhardness (SMH) was evaluated at baseline (T0), on the first (T1) and fifth (T5) days. SMH loss (%SHL) was calculated. Surface roughness (Ra, µm) was determined at T0 and T5. Morphology and mineral content were evaluated under scanning electron microscopy and energy-dispersive x-ray spectroscopy. Data were analyzed using ANOVA/Tukey or Bonferroni (α = 5%). RESULTS: No differences in %SHL were detected among groups at T1. At T5, OBP promoted %SHL, Ra, and ΔRa significantly lower than all the other groups (p < 0.05). All groups exhibited morphological changes in topography and similar Ca/P means before and after treatments. CONCLUSIONS: Dentifrice containing SnF2 minimized the negative effects on the SMH and Ra caused by exposure to orange juice after 5 days of simulated cycling. CLINICAL RELEVANCE: Patients who are more exposed to risk factors for dental erosion could benefit from the use of dentifrice containing SnF2.

Impact of FokI (rs2228570) and BglI (rs739837) polymorphisms in VDR gene on permanent tooth eruption: A cross-sectional study.

Introduction: Genetic polymorphisms who disturb the mineral homeostasis during tooth development and eruption are candidate to clarify the molecular mechanisms involved in changes in the tooth eruption chronology. In this study, we evaluate whether the FokI (rs2228570) and BglI (rs739837) polymorphisms in the Vitamin D receptor (VDR) gene are associated with changes in the chronology of eruption of permanent teeth. Material & method: This cross-sectional study randomly included 353 biologically unrelated children, both sexes, without systemic impairment or syndromes and history of trauma during the primary dentition. One operator perform the oral clinical examination. The tooth was considered erupted if there was a visible minimum of any tooth surface emerging from the mucosa. Genomic DNA was extracted from buccal epithelial cells from saliva samples. Genotyping was performed by Real-Time Polymerase Chain Reactions using TaqMan® technology. The average of the total number of erupted permanent teeth between the genotypes was compared by the Mann-Whitney test and multivariate Generalized Linear Models (GLM) (α = 5 %). ß values with Confidence Interval (CI) 95 % were calculated. Results: The heterozygous adenine-guanine genotype of the FokI significantly decreases the number of erupted permanent teeth (ß = -1.15; CI 95 % = -2.22 to -0.07; p = 0.036). In the stratified analysis for maxillary and mandibular teeth, this genotype was associated with a decrease in the number of erupted maxillary permanent teeth (ß = -0.65; CI 95 % = -1.22 to -0.09; p = 0.023). BglI was not associated with permanent teeth eruption. Conclusion: The FokI, but not BglI, in the VDR may delay the eruption of permanent teeth.

The influence of dental bleaching on patient's quality of life: A multistudy analysis of aesthetic and psychosocial outcomes.

OBJECTIVES: To assess the Quality of Life (QoL) of participants treated with dental bleaching using different techniques by administering two questionnaires Oral Health Impact Profile (OHIP-14) and Psychosocial Impact of Dental Aesthetics Questionnaire (PIDAQ), as well as the bleaching efficacy and tooth sensitivity (TS). MATERIALS AND METHODS: Secondary results for nine randomized clinical trials were included, involving 489 participants who underwent bleaching procedures. The questionnaires were applied at baseline and 30-day post-bleaching. Bleaching efficacy (ΔSGU/ΔEab) and TS were also evaluated (VAS/NRS). The effect of bleaching on aesthetic self-perception was evaluated using the Paired t-test. The Kruskal-Wallis test assessed variations by technique. Also, the correlations between questionnaires and outcomes was evaluated (α = 0.05). RESULTS: After the bleaching treatment, both questionnaire revealed significant differences compared to the baseline, regardless of the factor evaluated (p < 0.05), except for Physical pain in OHIP-14 (p = 0.53). No correlation was found between OHIP-14 and bleaching efficacy (p < 0.008). A significant correlation was found between bleaching efficacy and dental self-confidence, indicating that dental self-confidence increased as the number of SGU (ΔSGU) increased, while social impact (ΔEab) and aesthetic concern (ΔSGU) decreased. Additionally, a significant correlation was observed between TS and OHIP-14 (Physical pain). For PIDAC, both dental self-confidence and psychological impact were correlated with TS in the VAS. CONCLUSION: Subjects who underwent dental bleaching treatment improved their self-perception and dental self-confidence. Dental bleaching, besides enhancing the patient's smile, also improves their self-esteem. CLINICAL RELEVANCE: Dental bleaching, besides improving the patient's smile, also enhances their self-esteem.

Predicting the Risk of Maxillary Canine Impaction Based on Maxillary Measurements Using Supervised Machine Learning.

OBJECTIVES: To predict palatally impacted maxillary canines based on maxilla measurements through supervised machine learning techniques. MATERIALS AND METHODS: The maxilla images from 138 patients were analysed to investigate intermolar width, interpremolar width, interpterygoid width, maxillary length, maxillary width, nasal cavity width and nostril width, obtained through cone beam computed tomography scans. The predictive models were built using the following machine learning algorithms: Adaboost Classifier, Decision Tree, Gradient Boosting Classifier, K-Nearest Neighbours (KNN), Logistic Regression, Multilayer Perceptron Classifier (MLP), Random Forest Classifier and Support Vector Machine (SVM). A 5-fold cross-validation approach was employed to validate each model. Metrics such as area under the curve (AUC), accuracy, recall, precision and F1 Score were calculated for each model, and ROC curves were constructed. RESULTS: The predictive model included four variables (two dental and two skeletal measurements). The interpterygoid width and nostril width showed the largest effect sizes. The Gradient Boosting Classifier algorithm exhibited the best metrics, with AUC values ranging from 0.91 [CI95% = 0.74-0.98] for test data to 0.89 [CI95% = 0.86-0.94] for crossvalidation. The nostril width variable demonstrated the highest importance across all tested algorithms. CONCLUSION: The use of maxillary measurements, through supervised machine learning techniques, is a promising method for predicting palatally impacted maxillary canines. Among the models evaluated, both the Gradient Boosting Classifier and the Random Forest Classifier demonstrated the best performance metrics, with accuracy and AUC values exceeding 0.8, indicating strong predictive capability.

Combination of metal artifact reduction and sharpening filter application for horizontal root fracture diagnosis in teeth adjacent to a zirconia implant.

Purpose: This study examined the influence of metal artifact reduction (MAR), the application of sharpening filters, and their combination on the diagnosis of horizontal root fracture (HRF) in teeth adjacent to a zirconia implant on cone-beam computed tomography (CBCT) examinations. Materials and Methods: Nineteen single-rooted teeth (9 with HRF and 10 without) were individually positioned in the right central incisor socket of a dry human maxilla. A zirconia implant was placed adjacent to each tooth. Imaging was performed using an OP300 Maxio CBCT (Instrumentarium, Tuusula, Finland) unit with the following settings: a current of 8 mA, both MAR modes (enabled and disabled), a 5×5 cm field of view, a voxel size of 0.085 mm, and a peak kilovoltage of 90 kVp. Four oral and maxillofacial radiologists independently evaluated the CBCT scans under both MAR conditions and across 3 levels of sharpening filter application (none, Sharpen 1×, and Sharpen 2×). Diagnostic metrics were calculated and compared using 2-way analysis of variance (α=5%). The weighted kappa test was used to assess intra- and inter-examiner reliability in the diagnosis of HRF. Results: MAR tool activation, sharpening filter use, and their combination did not significantly impact the area under the receiver operating characteristic curve, sensitivity, or specificity of HRF diagnosis (P>0.05). Intra- and inter-examiner agreement ranged from fair to substantial. Conclusion: The diagnosis of HRF in a tooth adjacent to a zirconia implant is not affected by the activation of MAR, the application of a sharpening filter, or the combination of these tools.

Prevalence of erosive tooth wear in risk group patients: systematic review.

OBJECTIVE: This systematic review investigates the prevalence of erosive tooth wear (ETW) in individuals classified as risk groups (gastroesophageal reflux disease, eating disorders, special diets, acidic beverage, drugs and alcohol, legal drugs and medications, and occupational or sports). MATERIALS AND METHODS: The research was conducted in nine databases (PubMed/MEDLINE, Embase, Cochrane Library, LILACS/BVS, SciELO, Scopus, Science Direct, Open Grey, and Web of Science) up to April 2024 (PROSPERO CRD42021270150), along with a manual search of grey literature. Observational studies involving children and adults from these previously mentioned risk groups, which provided data on ETW prevalence, were included without date or language restrictions. The methodological quality of studies was evaluated using the Joanna Briggs Institute's Prevalence Data Critical Appraisal Tool. General and subgroup data were meta-analyzed using a random-effects model. RESULTS: Overall, 4403 studies were retrieved, out of which 148 met the inclusion criteria. Each risk group showed higher prevalences of ETW in these patients in general and subgroup analysis; although subgroup analysis was not possible for all risk groups due to the heterogeneity of the indices found. CONCLUSIONS: The Legal drugs and Medications risk group showed lower overall prevalence values (30%), while the Drugs and Alcohol risk group obtained higher values (67%). Prevalence rates for other groups were: Gastroesophageal reflux disease (54.1%), Eating Disorders (65%), Special Diets (65.9%), Acidic Beverages (40%), Occupational and Sports (51%). CLINICAL RELEVANCE: This systematic review highlights that risk groups are indeed at significant risk for the development of ETW and greater preventive care and dental monitoring are needed.

Tooth loss from the perspective of studies employing a life course approach: a systematic review.

The life course approach scrutinizes factors that shape the development of diseases over time. Tooth loss, which is influenced by social, behavioral and biological factors, can occur at various stages of life and tends to become more prevalent in later years. This systematic review examined the influence of socioeconomic, psychosocial, biological and behavioral adversities in life on the likelihood of tooth loss. Searches were conducted in the Embase, PubMed, Web of Science, Ovid, PsycINFO, Scopus and LILACS databases. Reference management was performed using EndNote online. The risk of bias was appraised using the Newcastle-Ottawa Scale (NOS). The electronic searches yielded 1366 records, 17 of which (13 cohort and four cross-sectional studies) met the inclusion criteria. According to the NOS, all studies had a low risk of bias. Two studies found a link between a lower education and higher incidence of tooth loss and socioeconomic status exerted a significant influence in 47% of the studies. Disadvantaged socioeconomic trajectories and health-related factors, such as smoking, general health perception and oral health behaviors, increased the likelihood of tooth loss. Factors such as dental visits, a history of toothache and exposure to fluoridated water influenced the likelihood of tooth loss. Individuals who experienced adversities in socioeconomic, behavioral and biological aspects throughout their life course were more prone to tooth loss.

Alveolar bone healing patterns in chronic kidney failure and kidney transplant recipients: A pixel intensity and fractal analyses.

AIMS: To assess and compare radiographically the alveolar bone after tooth extractions in individuals with chronic kidney failure undergoing hemodialysis (CKFh), those submitted to kidney transplantation (KT), and those without kidney disease (CG) by using fractal analysis (FA) and pixel intensity (PI). METHODS AND RESULTS: Periapical radiographs of 48 CKFh individuals (87 extracted teeth), 12 KT individuals (26 extracted teeth and 29 control individuals [76 extracted teeth] were analyzed at 7 and 60 days after tooth extraction. Fractal dimension (FD) and PI were assessed to evaluate the alveolar trabecular bone structural complexity and mineral content. The difference in FD values between the 7th and 60th postoperative days in KT individuals (0.03 ± 0.08) was significantly lower compared to those of CKFh individuals (0.09 ± 0.10) and controls (0.15 ± 0.06). As for the difference in PI values, KT (4.55 ± 10.24) and CKFh groups (9.88 ± 15.90) showed significantly lower values compared to those of the control group (17.93 ± 11.86) in the same period. These results indicate a lower gain in the trabecular bone complexity and bone density in the alveolus of KT individuals compared to the other groups. CONCLUSIONS: Overall mineral content and thickness of the bone in the plane of the x-ray beam were lower in KT and CKFh individuals compared to controls, reflecting the need for careful consideration in recommending rehabilitation with dental implants for these patients. Particular attention should be given to the potential challenges in oral rehabilitation of KT patients.

Digital and analog techniques for cemento-enamel junction reconstruction: A case study.

BACKGROUND: Non-carious cervical lesions (NCCLs) refer to the loss of dental hard tissue in the cervical region due to physical and/or chemical factors, often associated with the disappearance of the cemento-enamel junction (CEJ), posing challenges in both diagnosis and treatment of gingival recessions (GR). This case study introduces two protocols for multidisciplinary CEJ reconstruction prior to the root coverage therapy (RCT). METHODS: Two patients with GR and NCCLs were treated using two CEJ reconstruction techniques: both, analogically and digitally guided. For each case, the position of the therapeutic CEJ was predetermined using a combination of the methods described by Zucchelli and Cairo. Then, an analog or digital diagnostic wax-up was performed accordingly. In the analogically guided technique, a transparent silicone guide matrix was used to transfer information from the dental wax-up. In contrast, the digitally guided technique employed a rigid, translucent resin prosthetic guide matrix that was designed and printed. Restorations were fabricated using direct composite resin and RCT was performed 1 week later in both techniques. RESULTS: At 6 months, both cases demonstrated complete root coverage and effective healing of the soft tissues surrounding the restorations. CONCLUSIONS: Dimensional changes in materials and precise guide adjustment in the analog technique are operator-dependent and can affect the outcomes. Digital procedures, though effective, are costly and may limit their use. The usage of these two CEJ reconstruction techniques enhances communication within the multidisciplinary team and ensures optimal aesthetic outcomes and precise placement of the gingival margin. KEY POINTS: There are no established clinical protocols described in the literature for reconstructing the cemento-enamel junction (CEJ) once the position of a therapeutic CEJ has been predetermined and prior root coverage therapy (RCT). Performing a diagnostic wax-up (analogically or digitally) to reconstruct the therapeutic CEJ is crucial and facilitates the creation of a prosthetic guide that accurately reproduces the defined CEJ position. The reconstruction of the CEJ may improve the prognosis of RCT. PLAIN LANGUAGE SUMMARY: This study looked at a dental issue called non-carious cervical lesions, which happens when the hard tissue near the gum line of a tooth wears away, making it harder to treat gum recession. Two different approaches were tested to rebuild the lost tissue in the gum area before performing a procedure to cover the exposed roots. One approach used traditional methods with physical guides to help place the new tissue, while the other used advanced digital techniques to create a precise guide using 3D printing. After 6 months, both methods successfully covered the exposed roots and helped the gums heal properly. However, the traditional method's results can vary depending on the dentist's skill, while the digital method, although more accurate, can be expensive. Using these methods can improve teamwork among dental specialists and lead to better-looking results by ensuring the gum line is placed exactly where it should be.

Effectiveness of different surface treatments on bond strength between 3D-printed teeth and denture base.

PURPOSE: To investigate the effects of different surface treatments and thermal cycling on the shear bond strength between 3D-printed teeth and denture bases. MATERIAL AND METHODS: For the shear bond strength (SBS) test, the specimens were the maxillary central incisors (11 × 9 × 7 mm) bonded on a cylindrical base (20 × 25 mm). The control group was heat-cured polymethylmethacrylate (PMMA) (N = 20). The printed group was divided into five subgroups (N = 20): no treatment, sandblasting with aluminum oxide (Al2O3), methyl methacrylate monomer, acetone, and adhesive with urethane dimethacrylate. Half of the samples were subjected to 2000 thermal cycling cycles, and all samples were subjected to the SBS test. The failure mode was established as adhesive, cohesive, or mixed through stereomicroscopic analysis. The surface roughness test (Sa) was performed using optical profilometry, and the rectangular specimens (14 × 14 × 2.5 mm) were divided into four groups according to the surface treatments (N = 7 per group). Paired T and Wilcoxon tests were conducted to perform comparisons within the same group. The Kruskal-Wallis and Dwass-Steel-Critchlow-Fligner post-hoc tests were conducted to compare the groups. RESULTS: Al2O3 sandblasting in the 3D-printed groups achieved high SBS values comparable to those of the control group in the thermal cycled (p = 0.962) and non-thermal cycled samples (p = 0.319). It was the only treatment capable of modifying the surface of the 3D-printed resin, thereby increasing the roughness (p = 0.016). CONCLUSIONS: Sandblasting is recommended to increase the bond strength between the tooth and denture bases.

Longitudinal association between dentition status and gait speed among older Brazilian adults: SABE cohort study.

BACKGROUND: Oral health has been associated with general health conditions, but few longitudinal studies evaluated the effect of dentition status on gait speed. OBJECTIVE: This study aimed to investigate the longitudinal association between different time-varying measures of dentition status (i.e., number of teeth, the presence of periodontal pockets and the functional impact of oral health) and gait speed (outcome) in older Brazilian adults. MATERIALS AND METHODS: This was a prospective study using data from the Health, Well-being and Aging cohort study (SABE) from 2006, 2010 and 2015. The gait speed was the dependent variable and the independent variables of interest were dentition status evaluated using the number of teeth, use of dental prostheses, presence of periodontal pocket, clinical attachment loss and self-perceived poor functional oral health. Dentition status measures were obtained through clinical oral examinations, performed by trained dentists using standardized criteria proposed by the World Health Organization. Self-perceived poor functional oral health was evaluated using the functional domain of the Geriatric Oral Health Assessment Index. The longitudinal effect of dentition status on gait speed was evaluated using mixed-effects linear models. The effect of the number of teeth/periodontal pocket/attachment loss on gait speed change over time was evaluated by including an interaction term between these variables. The effect of periodontal pocket was tested only among dentate individuals. RESULTS: Data for the complete sample included 3,306 observations from 1,964 individuals. The analyses for dentate individuals included 1,883 observations from 1,149 individuals. There was a positive association between the number of teeth and mean gait speed. Individuals using dental prostheses also had higher means of gait speed than those without dental prostheses. Gait speed was lower among individuals with periodontal pockets and with attachment loss. No interaction was found between any of the indicators of dentition status and time. CONCLUSION: Gait speed was associated with dentition status and this association was constant over time.

Anthropogenic modification of a giant ground sloth tooth from Brazil supported by a multi-disciplinary approach.

Identifying evidence of human modification of extinct animal remains, such as Pleistocene megafauna, is challenging due to the similarity of anthropogenic and non-anthropogenic taphonomic features observed under optical microscopy. Here, we re-investigate a Late Pleistocene ground sloth tooth from northeast Brazil, previously suggested as human-modified based only on optical observation. To characterize the macro- and micro-morphological characteristics of the marks preserved in this tooth and evaluate potential human modification, we used stereomicroscope and scanning electron microscopy (SEM) supplemented by energy dispersive spectroscopy (EDS), UV photoluminescence (UV/PL), synchrotron-based X-ray fluorescence (SR-XRF), and synchrotron micro-computed tomography (SR-µCT). These methods allowed us to discriminate non-anthropogenic taphonomic features (root and sedimentary damage), anthropogenic marks, and histological features. The latter shows the infiltration of exogenous elements into the dentine from the sediments. Our evidence demonstrates the sequence of anthropogenic and non-anthropogenic taphonomic modification of this tooth and supports its initial intentional modification by humans. We highlight the benefits of emerging imaging and spectral imaging techniques to investigate and diagnose human modification in fossil and archaeological records and propose that human modification of tooth tissues should be further considered when studying possibly anthropogenically altered fossil remains.

Development of whitening mouth rinses formulated with mushroom residues and their effect on enamel's physical properties.

Objectives: This study aimed to develop whitening mouth rinses formulated with industrial mushrooms and compare them with over-the-counter whitening mouth rinses. Materials and Methods: Formulations with black shimeji mushrooms, mushroom substrates, and mushroom stalks were developed. Bovine enamel/dentin samples were divided into 7 groups (n = 10): Colgate Luminous White, Listerine Whitening Extreme (LWE), Listerine Cool Mint (LC), mushroom extract rinse (MEC), mushroom substrate rinse (MSB), mushroom stalk rinse (MTC), and artificial saliva. Samples were stained with black tea for 6 days, and then were immersed in 100 mL of each mouth rinse twice daily for 14 days. Color parameters (CIELAB [ΔE*], CIEDE2000 [ΔE00], whiteness index for dentistry [ΔWID]) and microhardness (Knoop hardness number [KHN]) were analyzed at T1 (initial), T2 (24 hours), and T3 (7 days). Mouth rinse pH was measured, and enamel was examined using a scanning electron microscope. Data were analyzed using generalized linear models, and KHN with the generalized linear mixed model for repeated measures (p ≤ 0.05). Results: ΔE* was higher in LW and MSB groups. No significant differences were found for ΔE00 (p = 0.0982) and ΔWID (p = 0.2536). Experimental mouth rinses did not promote enamel whitening based on ΔE00 and ΔWID. LWE and LC reduced KHN and had a more acidic pH, while MEC had higher KHN at T2. MEC, MSB, and MTC had alkaline pH, not altering the tooth surface. Conclusions: Black shimeji mushrooms are promising for mouth rinse development due to their alkaline pH and non-altering effect on surface microhardness.

Erosive Tooth Wear and Associated Risk Indicators in Schoolchildren from Rural and Urban Areas of the State of Mexico: A Cross-Sectional Study.

BACKGROUND AND OBJECTIVE: Limited access to health services and low educational levels are factors in the rural population that are associated with the development of oral pathologies. However, the specific risk indicators contributing to erosive tooth wear (ETW) in these populations remain unclear. The objective of this study was to identify risk indicators associated with the prevalence of erosive tooth wear (ETW) in schoolchildren aged 8-12 years from rural and urban areas in the State of Mexico. METHODS: A cross-sectional study was carried out in public schools in rural and urban areas. The prevalence of ETW was evaluated using the Basic Erosive Wear Examination (BEWE). The risk indicators studied were gastroesophageal reflux, vomiting, vitamin C, food, beverages, dental hygiene, bruxism, and hyposalivation. Logistic regression models were used to calculate odds ratios (OR) and 95% confidence intervals (CI). RESULTS: The prevalence of ETW was higher in the rural area (77.3%) compared to the urban area (51.2%) (p = 0.001). The odds of presenting ETW were more than twice in schoolchildren from rural areas compared to those from urban areas (OR: 2.25, 95% CI: 1.11-3.98). Risk indicators varied between rural and urban populations, with different factors such as the consumption of fresh tomato sauce, orange, tangerine, atole (artisanal corn-based drink), and teeth grinding in the rural area, and lemon, soft drink, fruit juice consumption, and the simplified oral hygiene index in the urban area (p < 0.05). CONCLUSIONS: To prevent ETW, strategies offering tailored dietary and hygiene advice should be proposed, considering the specific conditions of each geographic area.

In-Office Dental Bleaching Using 37% Carbamide Peroxide Versus 35% Hydrogen Peroxide: A Randomized, Double-Blind Clinical Trial.

OBJECTIVE: Compare the tooth sensitivity (TS) and bleaching efficacy (BE) of in-office dental bleaching performed with 35% hydrogen peroxide (HP) or 37% carbamide peroxide (CP). MATERIALS AND METHODS: Sixty-six participants were randomly divided into two groups according to the bleaching gel applied to the right hemiarch: 35% HP, or 37% CP. TS was recorded immediately after, up to 1, 24, and 48 h after bleaching, using the VAS and NRS scales. BE was assessed before bleaching and 1 month after using color guide units (ΔSGUs) and a spectrophotometer (ΔEab, ΔE00, and ΔWID). TS was assessed using McNemar's and paired t-test (VAS) or Wilcoxon signed rank (NRS). The paired t-test was used to analyze BE (α = 0.05). RESULTS: TS risk and intensity were lower for the 37% CP (p = 0.003 and p < 0.005). Despite significant differences between the groups after 1 month (ΔSGU and ΔE00; p < 0.05), the color measurements of both groups exceeded the 50%:50% perceptibility/acceptability threshold. CONCLUSION: In-office dental bleaching using 37% CP resulted in reduced risk and TS intensity, without prejudice to the BE. CLINICAL RELEVANCE: The use of 37% CP for in-office dental bleaching could decrease TS risk and intensity without affecting BE. TRIAL REGISTRATION: ClinicalTrials.gov identifier: RBR-683qhf.

Evaluation of Enamel Surface Properties Submitted to Bleaching With 35% Hydrogen Peroxide Associated With Titanium Tetrafluoride (TiF4).

OBJECTIVE: This study evaluated the color change, surface roughness, mineral content and morphology of enamel bleached with 35% hydrogen peroxide (HP) combined with an experimental gel containing 1% titanium tetrafluoride (TiF4). MATERIALS AND METHODS: Bovine enamel blocks were treated with (n = 12): (TiF) experimental gel containing 1% TiF4, (HP) 35% HP, (HPT) 35% HP + 1% TiF4 and (CT) control. Bleaching with HP was performed in 3 sessions (3 × 15 min/applications). pH, colorimetric parameters, surface roughness, mineral content and enamel morphology were determined. The pH was evaluated for 45 min. The color parameters were determined before bleaching (T0), and 14 days elapsed from the last bleaching session (T4). Surface roughness was analyzed at T0 and immediately after last bleaching session (T3). Enamel mineral content and morphology were verified at T4. Data were statistically analyzed by one-way, two-way ANOVA and Kruskal-Wallis (α = 0.05). RESULTS: TiF increased surface roughness, and no differences between HP and HPT in terms of color and CO 3 2 - $$ {\mathrm{CO}}_3^{2-} $$ - PO 4 3 - $$ {\mathrm{PO}}_4^{3-} $$ mineral content. Ti was detected only on TiF, and slight surface morphology changes were observed in bleached enamel. CONCLUSIONS: The combination of TiF4 and 35% HP did not interfere with the enamel bleaching effect, controlled surface roughness, and kept mineral content but promoted a minor surface morphology alteration. CLINICAL SIGNIFICANCE: Due to the adverse effects of bleaching, titanium tetrafluoride (TiF4) has gained attention for its therapeutic properties, including the ability to reverse mineral loss and neutralize remineralization of mineral structures. Therefore, TiF4's remineralizing capacity may be a good alternative for incorporation into hydrogen peroxide bleaching agents.

Is There an Increase in Possible Sleep Bruxism in Children Over Time? A Longitudinal Study.

BACKGROUND: Bruxism is a behaviour that has several consequences in an individual's life, especially when it starts in childhood. However, bruxism can be a potential protective factor, which is an attribute that reduces the chance of a negative health outcome. OBJECTIVES: To evaluate the incidence of sleep bruxism (SB) and dental wear in children and adolescents. MATERIALS AND METHODS: This longitudinal study began in 2014 and 2016 (baseline) with initial 1816 children followed for 5 and 3 years, respectively. The follow-up data collection started in 2019. The diagnosis of SB was parents report (baseline) and self-report (follow-up) due to age groups of each phase, and questions related to symptoms of SB were collected. Five calibrated examiners (kappa >0.7) collected the clinical data. The clinical variables were dental erosion and dental wear. Contextual, individual, behaviour and clinical characteristics were collected. A multilevel logistic regression model was used to investigate the association of contextual, individual, behaviour and clinical characteristics with SB. Poisson regression for repeated measures was performed to evaluate the incidence of SB and dental wear (incidence rate ratio-IRR and confidence interval-95% CI). RESULTS: Two hundred and fifty-three children and adolescents answered questionnaires and were clinically examined. The mean age of the follow-up in 2019 was 11.25 years old (±2.19). There was no increase in the incidence of SB (95% CI: 0.74-1.35). Children/adolescents had a 2.2 higher risk to present dental wear (95% CI: 1.89-2.60). SB at the follow-up was associated with the contextual variable, earache, erosion and awake bruxism. CONCLUSIONS: In this population, children with SB remained with this behaviour and showed higher dental wear over the years.

Pediatric Charcot-Marie-Tooth disease and peripheral nerve blocks: a retrospective cohort study of 25 patients.

PURPOSE: Charcot-Marie-Tooth (CMT) disease is an inherited neurologic disorder characterized by progressive peripheral neuropathies. The use of peripheral nerve blocks (PNB) in patients with CMT disease has been controversial because of concerns about exacerbating existing neurologic impairments and the "double hit" hypothesis. We aimed to assess the use of PNB in pediatric patients with CMT disease undergoing orthopedic surgery to address the limited data available in the literature on this topic. METHODS: In this retrospective cohort study, we included all pediatric patients with CMT disease scheduled for orthopedic surgery receiving PNB at our centre. All of the patients had preoperative neurologic exams and received one or more ultrasound-guided regional anesthesia techniques. Data extracted included details of anesthesia technique, surgical procedure, opioid consumption, and pain scores during the first three postoperative days. We also reviewed any complications such as neurologic deficits and local anesthetic toxicity. We used descriptive statistics to summarize the findings. RESULTS: We included 25 patients, 14 of whom (56%) presented with pre-existing neurologic deficits, primarily in the lower extremities. Postoperative assessments revealed no new neurologic impairments in 24/25 (96%) patients, with only one patient experiencing a nerve injury possibly related to the surgical procedure. Opioid consumption was low in the postanesthesia care unit and on the day of surgery. No additional complications were noted in the first 72 hr after surgery. CONCLUSION: Despite concerns, PNB showed favourable outcomes in a pediatric cohort with CMT disease, with low opioid consumption and pain scores and minimal complications during follow-up. These findings match previous reports of adult patients with CMT disease and suggest that the benefits of PNB may outweigh the perceived risks in pediatric patients with CMT disease.

RéSUMé: OBJECTIF: La maladie de Charcot-Marie-Tooth (CMT) est une maladie neurologique héréditaire caractérisée par des neuropathies périphériques progressives. L'utilisation de blocs nerveux périphériques (BNP) chez la patientèle atteinte de CMT est controversée en raison des inquiétudes concernant l'exacerbation des déficiences neurologiques existantes et de l'hypothèse d'une « double insulte ¼. Notre objectif était d'évaluer l'utilisation de BNP chez les patient·es pédiatriques atteint·es de CMT bénéficiant d'une chirurgie orthopédique afin de pallier les données limitées disponibles dans la littérature à ce sujet. MéTHODE: Dans cette étude de cohorte rétrospective, nous avons inclus tou·tes les patient·es pédiatriques atteint·es de CMT devant bénéficier d'une chirurgie orthopédique et recevant un BNP dans notre centre. Tou·tes ont bénéficié d'examens neurologiques préopératoires et ont reçu une ou plusieurs techniques d'anesthésie régionale échoguidées. Les données extraites comprenaient des détails sur la technique d'anesthésie, l'intervention chirurgicale, la consommation d'opioïdes et les scores de douleur au cours des trois premiers jours postopératoires. Nous avons également examiné toutes les complications telles que les déficits neurologiques et la toxicité des anesthésiques locaux. Nous avons utilisé des statistiques descriptives pour résumer les résultats. RéSULTATS: Nous avons inclus 25 patient·es, dont 14 (56 %) présentaient des déficits neurologiques préexistants, principalement dans les membres inférieurs. Les évaluations postopératoires n'ont révélé aucune nouvelle déficience neurologique chez 24 patient·es sur 25 (96 %), une seule personne ayant subi une lésion nerveuse possiblement liée à l'intervention chirurgicale. La consommation d'opioïdes était faible en salle de réveil et le jour de l'opération. Aucune complication supplémentaire n'a été notée dans les 72 premières heures après la chirurgie. CONCLUSION: Malgré les inquiétudes, le BNP a montré des résultats favorables dans une cohorte pédiatrique atteinte de CMT, avec une faible consommation d'opioïdes et des scores de douleur et des complications minimes pendant le suivi. Ces résultats correspondent à des comptes rendus antérieurs de patient·es adultes atteint·es de CMT et suggèrent que les avantages des BNP pourraient l'emporter sur les risques perçus chez la patientèle pédiatrique atteinte de CMT.

Metal artifact reduction tool and mA levels impact on the diagnosis of fracture extension in endodontically treated teeth using cone-beam CT.

AIM: To evaluate the influence of different levels of metal artifact reduction (MAR) tool and milliamperage (mA) on the diagnosis of fracture extension in endodontically treated teeth using cone beam CT (CBCT). MATERIALS AND METHODS: Ten maxillary premolars were endodontically treated and positioned in the empty sockets of a human maxilla covered with wax. CBCT acquisitions were performed using the Eagle Edge device (Dabi Atlante, Brazil) adjusted to 120 kVp, FOV of 4 × 6 cm, exposure time of 24 s and voxel size of 0.2 mm in 8 different conditions with different MAR (1, 2 and 3) and mA (3.2 and 6.3) levels. Crown-root fractures were simulated in the universal testing machine, and CBCT images were acquired again. Five radiologists evaluated the presence and extension of fractures with a 5-point scale. Statistical analysis was performed by analysis of variance, Tukey and Kappa test (α = 0.05). RESULTS: Although different mA levels did not significantly (p > 0.05) affect the diagnosis values for fracture presence and extension, when evaluated the different levels of MAR, AUC and sensitivity showed significantly higher values (p < 0.05) for MAR 0 using 6.3 mA and kappa agreement showed significantly higher values (p < 0.05) for MAR 0 and 2 using 6.3 mA. CONCLUSIONS: Although mA levels do not have a diagnostic effect when isolating the MAR level; in 6.3 mA, MAR 0 and 2 can positively influence the diagnosis of fracture extension in endodontically treated teeth using CBCT. CLINICAL RELEVANCE: The isolate evaluation of dental fracture presence can overlook diagnostics error of its extension.