ABSTRACT
The Brazilian superfruit called Açaí or Assaí has gained interested from researcher and consumers worldwide, due to its health-related properties. In this context, this pioneering study aimed to compare the physicochemical, nutritional, and thermal properties of vegetable oils obtained from two varieties of açaí (Euterpe oleracea), purple and white. Both açaí oils from white (WAO) and purple (PAO) varieties were obtained by using the conventional solid-liquid extraction, which resulted in oil yields ranging from 52 to 61%. WAO and PAO were analyzed by their edibility quality parameters given the recommendations from Codex Alimentarius; their nutritional functionality indices and their composition of fatty acids and triglycerides content were estimated. Both oils showed low levels of acidity and peroxides, <1.8 mg KOH g-1 and < 1.7 mEq kg-1, respectively, which are good indicators of their preservation status, agreeing with the food regulations. PAO and WAO showed differences among the composition of fatty acids, mainly related to the content of monounsaturated fatty acids (MUFAs), which were 62.5 and 39.5%, respectively, mainly oleic acid. Regarding the polyunsaturated fatty acids (PUFAs), the WAO showed up to 23% of linoleic acid, whereas the PAO exhibited up to 11% of it. These differences reflect on the values of the nutritional functionality indices, atherogenic (AI), thrombogenic (IT), and hypocholesterolemic/hypercholesterolemic ratio (H/H). Both PAO and WAO showed low levels of AI and TI and superior values of H/H than other oilseeds from the literature. These results indicate the nutritional properties of açaí oils regarding a potential cardioprotective effect when included in a regular dietary intake. The thermogravimetric behavior and the evaluation of oxidation status by infrared spectroscopy (FTIR) were also studied. Both açaí oils demonstrated higher thermal stability (with an onset temperature ranging from 344 to 350 °C) and low indications of oxidation status, as no chemical groups related to it were noted in the FTIR spectrum, which agrees with the determined acidity and peroxide content. Moreover, the FTIR analysis unveiled characteristic chemical groups related to fatty acids and triglycerides, agreeing with the literature reports. These findings collectively contribute to a deeper comprehension of the nutritional and functional properties between white and purple açaí oils, offering valuable insights into their potential health, food, and industrial applications.
ABSTRACT
Vegetable oils are rich in health-beneficial compounds, including fatty acids, phenolic compounds, natural antioxidants, and fat-soluble vitamins. However, oil extraction methods can influence their composition. This study aims to understand the chemical basis for developing a green process to extract oils from two Andean seeds, cañihua (Chenopodium pallidicaule) and tarwi (Lupinus mutabilis). Ethanol, considered a green solvent, is compared to petroleum ether used at the laboratory level and hexane used at the industrial scale for extracting oils. The extraction efficiency is assessed in terms of yield, fatty acids profile, polar and neutral lipids, tocopherols, phenolic compounds, and antioxidant capacity. The chemical composition of edible commercial oils, such as sunflower, rapeseed, and olive oils, was used as a reference. Hexane had the highest extraction yield, followed by petroleum ether and ethanol. However, the oils extracted with ethanol having yields of tarwi 15.5% and cañihua 5.8%, w/w showed the significatively superior content of tocopherols (α, γ, and δ); phenolic compounds; and antioxidant capacity. In addition, ethanol-extracted (EE) oils have higher levels of polar lipids, such as phosphatidylcholine and phosphatidylinositol, than those extracted with the other solvents. Remarkably, EE oils presented comparable or slightly higher levels of monounsaturated fatty acids than those extracted with hexane. Finally, compared to the commercial oils, tarwi and cañihua EE oils showed lower but acceptable levels of oleic, linoleic and palmitic acids and a wider variety of fatty acids (10 and 13, respectively). The composition of tarwi and cañahua oils extracted with ethanol includes compounds associated with nutritional and health benefits, providing a sustainable alternative for oil production.
ABSTRACT
This study addressed the need for a more accessible and efficient method of analyzing phenolic content in vegetable oils. The research aimed to develop a method that could be widely adopted by both researchers and industry professionals, ultimately revolutionizing the way phenolic content in vegetable oils is analyzed. This study developed a method of determining the total phenolic content (TPC) in vegetable oils using smartphone image analysis in the RGB color model. The method employed a gallic acid calibration solution and demonstrated exceptional determination coefficients for the RGB colors. The R-red color was selected as the basis for the analyses, and the method was statistically equivalent to standard UV/Vis spectrophotometry. The highest TPC was determined in hemp and olive oils, while the lowest was found in rice bran, grapeseed, and macadamia nut oils. This study concluded that smartphone image analysis, mainly using the R component of the RGB color model, was a superior alternative to traditional spectrophotometric methods for determining the TPC in vegetable oils. This innovative approach could revolutionize phenolic content analysis by providing researchers and industry professionals with a cost-effective, safe, and efficient tool. The estimated limit of detection (LOD) of 1.254 mg L-1 and limit of quantification (LOQ) of 3.801 mg L-1 further confirmed the reliability and comparability of the method. With these findings, it was expected that the method would be widely adopted in the future.
ABSTRACT
Current petrochemical-based adhesives adversely affect the environment through substantial volatile organic compound (VOC) emissions during production, contributing to air pollution and climate change. In contrast, vegetable oils extracted from bio-resources provide a compelling alternative owing to their renewability, abundance, and compatibility with adhesive formulation chemistry. This review aimed to critically examine and synthesize the existing scholarly literature on environmentally friendly, sustainable, and high-performance polyurethane adhesives (PUAs) developed from vegetable oils. The use of PUAs derived from vegetable oils promises to provide a long-term replacement while simultaneously maintaining or improving adhesive properties. This quality renders these adhesives appropriate for widespread use in various sectors, including construction, automotive manufacturing, packaging, textile, and footwear industries. This review intended to perform a comprehensive assessment and integration of the existing research, thereby identifying the raw materials, strengths, weaknesses, and gaps in knowledge concerning vegetable oil-based PUAs. In doing so, it responded to these gaps and proposes potential avenues for future research. Therefore, this review accomplishes more than merely evaluating the existing research; it fosters the advancement of greener PUA technologies by identifying areas for improvement and innovation towards more sustainable industrial practices by showcasing vegetable oil-based PUAs as viable, high-performance alternatives to their petroleum-based counterparts.
ABSTRACT
Electrical discharge machining with solid electrodes represents an efficient solution to generate blind cavities with complex geometry. Vegetable oils represent an alternative to conventional dielectrics, which are considered harmful for the environment and human health. This study tested the feasibility of two widely used vegetable oils, sunflower and soybean, under intense machining of three alloys with application in aeronautic industry, aiming for high process productivity and a good surface quality. The results have revealed that vegetable oils are capable to ensure an improvement of the material removal rates that can reach up to 55.15 % compared to mineral oil. Also, the vegetable dielectrics allowed an improvement of surface quality for non-ferrous alloys, up to a maximum of 19.70 %, whereas for the stainless steel, the mineral oil has provided a better surface finish.
ABSTRACT
We aimed to obtain the optimal formula for human milk fat substitute (HMFS) through a combination of software and an evaluation model and further verify its practicability through an animal experiment. The results showed that a total of 33 fatty acid (FA) and 63 triglyceride (TAG) molecular species were detected in vegetable oils. Palmitic acid, oleic acid, linoleic acid, 18:1/16:0/18:1, 18:2/16:0/18:2, 18:1/18:1/18:1 and 18:1/18:2/18:1, were the main molecular species among the FAs and TAGs in the vegetable oils. Based on the HMFS evaluation model, the optimal mixed vegetable oil formula was blended with 21.3% palm oil, 2.8% linseed oil, 2.6% soybean oil, 29.9% rapeseed oil and 43.4% maize oil, with the highest score of 83.146. Moreover, there was no difference in the weight, blood routine indices or calcium and magnesium concentrations in the feces of the mice between the homemade mixed vegetable oil (HMVO) group and the commercial mixed vegetable oil (CMVO) group, while nervonic acid (C24:1) and octanoic acid (C8:0) were absorbed easily in the HMVO group. Therefore, these results demonstrate that the mixing of the different vegetable oils was feasible via a combination of computer software and an evaluation model and provided a new way to produce HMFS.
Subject(s)
Fat Substitutes , Fatty Acids , Milk, Human , Plant Oils , Software , Triglycerides , Humans , Animals , Plant Oils/chemistry , Fatty Acids/chemistry , Milk, Human/chemistry , Mice , Triglycerides/chemistry , Fat Substitutes/chemistry , Palm Oil/chemistry , Soybean Oil/chemistry , Linseed Oil/chemistry , Rapeseed Oil/chemistry , Corn Oil/chemistry , Caprylates/chemistry , Palmitic Acid/chemistry , Oleic Acid/chemistryABSTRACT
Cold-pressed moringa, milk thistle, and jujube seed oils were investigated in terms of their characteristic profiles, thermal properties, and oxidative stability. The findings proved that the extracted oils were characterized by high nutritional values, which encourages their use in various fields. Results showed significant differences between the obtained oils. Overall, jujube seed oil exhibited the best quality parameters, with acidity equal to 0.762 versus 1% for the moringa and milk thistle seed oils. Milk thistle seed oil showed absorbance in the UV-C (100-290 nm), UV-B (290-320 nm), and UV-A (320-400 nm) ranges, while the moringa and jujube seed oils showed absorbance only in the UV-B and UV-A ranges. Concerning bioactive compounds, jujube seed oil presented the highest content of polyphenols, which promoted a good scavenging capacity (90% at 10 µg/mL) compared to the moringa and milk thistle seed oils. Assessing the thermal properties of the obtained oils showed the presence of four groups of triglycerides in the moringa and milk thistle seed oils, and two groups of triglycerides in the jujube seed oil. The thermograms were constant at temperatures above 10 °C for milk thistle seed oil, 15 °C for jujube seed oil, and 30 °C for moringa seed oil, which corresponded to complete liquefaction of the oils. The extinction coefficients K232 and K270, monitored during storage for 60 days at 60 °C, proved that jujube seed oil had the highest polyphenols content and was the most stable against thermal oxidation.
ABSTRACT
The utilization of supramolecular deep eutectic solvent eddy-assisted liquid-liquid microextraction utilizing 2-hydroxypropyl ß-cyclodextrin (SUPRADES) has been identified as a successful method for pre-enriching Cu, Zn, and Mn in vegetable oil samples. Determination of each element was conducted by inductively coupled plasma optical emission spectrometry (ICP-OES) after digestion of metal-enriched phases. Various parameters were examined, including the composition of SUPRADES species [2HP-ß-CD: DL-lactic acid], a cyclodextrin mass ratio of 20 wt%, a water bath temperature of 75 °C, an extractor volume of 800 µL, a dispersant volume of 50 µL, and an eddy current time of 5 min. Optimal conditions resulted in extraction rates of 99.6% for Cu, 105.2% for Zn, and 101.5% for Mn. The method exhibits a broad linear range spanning from 10 to 20,000 µg L-1, with determination coefficients exceeding 0.99 for all analytes. Enrichment coefficients of 24, 21, and 35 were observed. Limits of detection ranged from 0.89 to 1.30 µg L-1, while limits of quantification ranged from 3.23 to 4.29 µg L-1. The unique structural characteristics of the method enable the successful determination of trace elements in a variety of edible vegetable oils.
Subject(s)
Plant Oils , Solvents , Trace Elements , Plant Oils/chemistry , Trace Elements/analysis , Solvents/chemistry , Liquid Phase Microextraction/methods , Limit of Detection , 2-Hydroxypropyl-beta-cyclodextrin/chemistry , Food Contamination/analysis , Metals/chemistry , Metals/analysisABSTRACT
Recently, the scientific community's main goal is the long-term sustainability. Vegetable oils are easily accessible, non-depletable, and cost-effective materials. Vegetable oils are used to prepare polymeric alkyd surfaces. Novel and exciting designs of alkyd/graphene nanocomposites have provided eco-friendly thermal stability and protective coating surfaces. This review has briefly described important graphene-based alkyd nanocomposites along with their applications as protective coatings. These alkyd composites have high hydrophobicity, corrosion resistance, and durability. Graphene-based alkyd nanocoatings have many industrial and research interests because of their exceptional thermal and chemical properties. This work introduces an advanced horizon for developing protective nanocomposite coatings. The anti-corrosion properties and coatings' longevity may be improved by combining the synergistic effects of hybrid nanofillers introduced in this work.
Subject(s)
Graphite , Nanocomposites , Graphite/chemistry , Nanocomposites/chemistry , Surface PropertiesABSTRACT
The growing prevalence of bacterial and viral infections, highlighted by the recent COVID-19 pandemic, urgently calls for new antimicrobial strategies. To this end, we have synthesized and characterized a novel fatty acid epoxy-ester plasticizer for polymers, named GDE. GDE is not only sustainable and user-friendly but also demonstrates superior plasticizing properties, while its epoxy components improve the heat stability of PVC-based matrices. A key feature of GDE is its ability to confer antimicrobial properties to surfaces. Indeed, upon contact, this material can effectively kill enveloped viruses, such as herpes simplex virus type 1 (HSV-1) and the ß-coronavirus prototype HCoV-OC43, but it is ineffective against nonenveloped viruses like human adenovirus (HAdV). Further analysis using transmission electron microscopy (TEM) on HSV-1 virions exposed to GDE showed significant structural damage, indicating that GDE can interfere with the viral envelope, potentially causing leakage. Moreover, GDE demonstrates antibacterial activity, albeit to a lesser extent, against notorious pathogens such as Staphylococcus aureus and Escherichia coli. Overall, this newly developed plasticizer shows significant potential as an antimicrobial agent suitable for use in both community and healthcare settings to curb the spread of infections caused by microorganisms contaminating physical surfaces.
ABSTRACT
In recent years, there has been a growing interest in traditional medicinal practices such as Ayurveda, which emphasizes the use of natural ingredients for various therapeutic purposes. Vegetable oils are an integral part of our diet and have several applications in the cosmetics and healthcare industries. These oils have also been prescribed in ancient Ayurveda texts to treat various health problems. Ayurveda prescribes a processing technique called 'Murchana' to improve the therapeutic nature of the oils. Spectroscopic techniques have been used for quality assessment in many fields. High sensitivity and a low detection rate make spectroscopy a formidable analytical technique. This study focusses on the spectroscopic analysis of sesame and mustard oils prepared using the ayurvedic processing method 'Murchana'. Spectroscopic analysis techniques including UV-Vis absorbance spectroscopy, fluorescence spectroscopy, and FTIR spectroscopy were employed to study the oils. Origin software was used to plot graphs of the spectra. The results indicated that the murchana process may reduce the components of the oil responsible for its oxidation, thereby increasing the shelf life of the oils. However, further investigations, including other spectroscopy and chromatography techniques, will prove beneficial in ascertaining the effects of the murchana process on vegetable oils. The study's findings also suggest that spectroscopic techniques can be used to supplement chemical techniques to investigate the characteristics of vegetable oils.
Subject(s)
Mustard Plant , Sesamum , Plant Oils , Spectrometry, Fluorescence , Spectroscopy, Fourier Transform InfraredABSTRACT
The term Conjugated Linoleic Acid (CLA) refers generically to a class of positional and geometric conjugated dienoic isomers of linoleic acid. Among the isomers of linoleic acid cis9, trans11-CLA (c9, t11-CLA) and trans10, cis12-CLA (t10, c12-CLA) are found to be biologically active isomers, and they occur naturally in milk, dairy products and meat from ruminants. In addition, some vegetables and some seafoods have also been reported to contain CLA. Although the CLA levels in these natural sources are insufficient to confer the essential health benefits, anti-carcinogenic or anti-cancer effects are of current interest. In the rumen, CLA is an intermediate of isomerization and the biohydrogenation process of linoleic acid to stearic acid conducted by ruminal microorganisms. In addition to rumen bacteria, some other bacteria, such as Propionibacterium, Bifidobacterium and some lactic acid bacteria (LAB) are also capable of producing CLA. In this regard, Lactiplantibacillus plantarum (formerly Lactobacillus plantarum) has demonstrated the ability to produce CLA isomers from linoleic acid by multiple enzymatic activities, including hydration, dehydration, and isomerization. L. plantarum is one of the most versatile species of LAB and the bacterium is widely used in the food industry as a microbial food culture. Thus, in this review we critically analyzed the literature produced in the last ten years with the aim to highlight the potentiality as well as the optimal conditions for CLA production by L. plantarum. Evidence was provided suggesting that the use of appropriate strains of L. plantarum, as a starter or additional culture in the production of some fermented foods, can be considered a critical factor in the design of new CLA-enriched functional foods.
ABSTRACT
A new simple, fast and environmentally friendly deep eutectic solvent based dispersive liquid-liquid microextraction (DES-based DLLME) methodology assisted by vortex is presented for the separation and preconcentration of three elements (i.e., Fe, Cu and Pb) from edible oil samples (i.e., soybean, sunflower, rapeseed, sesame, and olive oil) prior to the determination by microwave-induced plasma optical emission spectrometry (MIP-OES). The deep eutectic solvent selected as extractant (i.e., choline chloride and ethylene glycol, 1:2) is synthesized and characterized by Fourier transform infrared spectroscopy (FT-IR), proton nuclear magnetic resonance spectroscopy (1H NMR) and differential scanning calorimetry (DSC), and the extraction conditions are optimized by a two steps experimental design. Under the optimum extraction conditions (i.e., diluted sample weight: 8.6 g; DES volume: 100 µL; extraction time: 1 min; centrifugation time and speed: 3 min and 3000 rpm; and dispersion system: vortex) the analytical method presents excellent linearity (i.e., R2 values higher than 0.99) in the range 10-500 µg kg-1, repeatability (i.e., CV values lower than 9.2%), and limits of detection (LOD) values of 3, 2 and 0.7 µg kg-1 for Pb, Fe and Cu, respectively. None of the analytes displayed amounts over the upper limit permitted by law, and recovery values of all analytes evaluated in the different samples using external standard calibration were close to 100%, which excludes significant matrix effects. Finally, AGREEprep metric has been used to evaluate the method greenness (final score of 0.47) and it has been compared successfully with previous publications for the same type of analytes and matrices.
ABSTRACT
This paper aims to highlight the use of different heat transfer fluid (HTF) configurations based on vegetable oils in Parabolic Trough Solar Concentrator (PTSC). Rapeseed and jatropha oils as innovative heat transfer materials combined with SiO2 and Al2O3 to obtain six (6) HTF configurations are used in a 1-dimensional PTSC model. The thermophysical properties of the nanofluids are determined from correlations derived from the literature, using Gauss-Seidel method from a numerical code developed in Matlab software. Model validation is obtained. Thermal sensitivity analysis shows that the use of rapeseed increases the thermal efficiency of the PTSC by around 4.21 % compared with jatropha. The use of nanofluids reduces thermal losses within the system due to thermal gradients. For a fixed irradiance and each 1 %-4 % increase in volume fraction, thermal efficiency increases by around 1.96 % when Al2O3/rapeseed is used and by 0.47 % when SiO2/rapeseed is used compared with rapeseed. Similarly, thermal efficiency increases by around 1.98 % when Al2O3/jatropha is used and decreases by around 0.20 % when SiO2/jatropha is used compared with jatropha. However, the positive effects of nanoparticles on thermal conductivity alone are not always sufficient to improve thermal efficiency, and thermal effects on heat capacity should also be considered.
ABSTRACT
In the past decade, there has been a significant rise in sustainable biomass based biofuel production to address energy needs while mitigating environmental impacts. Traditionally, bioethanol was used for biofuel production, but concerns over food security and environmental preservation have led to growing interest in alternative sources such as neutral lipids from vegetable oil and microalgae for biodiesel production. This research paper evaluates the potential of various oleaginous plants and microalgae as feedstocks for biodiesel production, with a focus on their fatty acid composition and its impact on biodiesel properties. The study examines the fatty acid profiles of 43 different plant and microalgae species and employs various equations to estimate key physical properties of biodiesel. Additionally, the communication compares these properties to International Biodiesel Standards (EN 14214 and ASTM D6751-08) to assess the suitability of the derived biodiesel for commercial use. It is impossible to describe a single composition that is optimal in terms of all essential fuel properties due to the opposing effects of some structural features of the Fatty Acid Methyl Esters (FAME). However, biodiesel should contain relatively low concentrations of both long chain saturated and polyunsaturated FAME to ensure adequate efficiency in terms of low temperature operability and oxidative stability. The results reveal significant variations in properties amongst different feedstocks, highlighting the importance of feedstock selection in biodiesel production. The study also establishes correlations between various fuel properties, providing valuable insights in to optimizing biodiesel production processes, which will be of great use to researchers, engineers, and stakeholders involved in biodiesel production.
Subject(s)
Fatty Acids , Microalgae , Fatty Acids/chemistry , Biofuels , Plant Oils/chemistry , Cold Temperature , BiomassABSTRACT
Currently, the combination of fingerprinting methodology and environmentally friendly and economical analytical instrumentation is becoming increasingly relevant in the food sector. In this study, a highly versatile portable analyser based on Spatially Offset Raman Spectroscopy (SORS) obtained fingerprints of edible vegetable oils (sunflower and olive oils), and the capability of such fingerprints (obtained quickly, reliably and without any sample treatment) to discriminate/classify the analysed samples was evaluated. After data treatment, not only unsupervised pattern recognition techniques (as HCA and PCA), but also supervised pattern recognition techniques (such as SVM, kNN and SIMCA), showed that the main effect on discrimination/classification was associated with those regions of the Raman fingerprint related to free fatty acid content, especially oleic and linoleic acid. These facts allowed the discernment of the original raw material used in the oil's production. In all the models established, reliable qualimetric parameters were obtained.
ABSTRACT
In this work, we propose a novel approach for extracting Cu and Ni from vegetable oils (which can be expanded to other metals). The method is based on the transference of the analytes to an aqueous acid phase due to the disruption of a three-component solution. The extraction was carried out in two steps. In the first step, a three-component solution was prepared comprising the sample, 1-octanol, and HNO3 solution. Next, the homogeneous system was disrupted by adding 1.0 mL of deionized water, and two phases were formed. The aqueous extract deposited in the bottom of the flask was collected with a micropipette, and Cu and Ni were determined by graphite furnace atomic absorption spectrometry (GF AAS). The developed method presented limits of quantification (LOQ) of 0.25 and 0.17 ng g-1 for Cu and Ni, respectively, and was successfully applied in the analysis of eleven oil samples from different origins.
Subject(s)
Graphite , Plant Oils , Plant Oils/chemistry , Graphite/chemistry , Spectrophotometry, Atomic/methods , Water/chemistryABSTRACT
In this study, potential toxic element (PTEs) including lead (Pb), arsenic (As), cadmium(Cd), iron (Fe) and zinc (Zn) in traditional and industrial edible vegetable oils (peanut, sunflower, olive and sesame) collected from Hamadan, west of Iran were determined using Inductivity Coupled Plasma Optical Emission Spectrometry (ICP-OES). Besides, probabilistic health risk assessment (non-carcinogenic and carcinogenic risks) was identified via total target hazard quotient (TTHQ) and cancer risk (CR) by the Monte Carlo Simulation (MCS) model. The ranking of concentration PTEs in traditional and industrial edible vegetable oils was Fe > Zn > As > Pb > Cd. The in all samples, content of PTEs in industrial oils were upper than traditional oils (p < 0.001). The level of PTEs in most of vegetable oils was lower than permissible concentration regulated by Codex and national standard. In term of non-carcinogenic, consumers were at acceptable range (TTHQ < 1) due to ingestion both traditional and industrial vegetable oils content of PTEs. In term of carcinogenic, CR the both adults and children was higher than acceptable range (CR < 1E-6), Hence consumer are at unacceptable risk due to ingestion industrial vegetable oils content of inorganic As. Therefore, it is recommended to implement control plans for PTEs in vegetable oils consumed in Hamadan, Iran.
Subject(s)
Arsenic , Metals, Heavy , Soil Pollutants , Adult , Child , Humans , Cadmium/toxicity , Cadmium/analysis , Plant Oils/analysis , Plant Oils/chemistry , Vegetables , Iran , Lead/analysis , Arsenic/toxicity , Arsenic/analysis , Zinc , Carcinogens , Risk Assessment , Metals, Heavy/analysis , Environmental Monitoring/methods , Soil Pollutants/analysisABSTRACT
Lipids are widespread in nature and play a pivotal role as a source of energy and nutrition for the human body. Vegetable oils (VOs) constitute a significant category in the food industry, containing various lipid components that have garnered attention for being natural, environmentally friendly and health-promoting. The review presented the classification of raw materials (RMs) from oil crops and quality analysis techniques of VOs, with the aim of improving comprehension and facilitating in-depth research of VOs. Brief descriptions were provided for four categories of VOs, and quality analysis techniques for both RMs and VOs were generalized. Furthermore, this study discussed the applications of lipidomics technology in component analysis, processing and utilization, quality determination, as well as nutritional function assessment of VOs. Through reviewing RMs and quality analysis techniques of VOs, this study aims to encourage further refinement and development in the processing and utilization of VOs, offering valuable references for theoretical and applied research in food chemistry and food science.
Subject(s)
Lipidomics , Plant Oils , Humans , Nutritive Value , FoodABSTRACT
This study introduces a novel biobased textile finishing agent synthesized as waterborne polyurethane dispersions (FCCB-WPUDs), utilizing bio-based monomers like fenugreek oil-based polyol, corn oil-derived emulsifier, and cellulose acetate butyrate (CAB) chain extender. The FCCB-WPUDs were prepared through the prepolymer polymerization method and characterized using FTIR, TGA, DMA, SEM, DLS, and swelling tests. Their application to poly-cotton fabrics significantly improved various fabric properties. The enhancements included increased washing fastness (from 3/4 ± 0.01 to 4 ± 0.02 for dyed and 3 ± 0.02 to 4/5 ± 0.02 for printed fabrics), rubbing fastness (from 3 ± 0.02 to 4/5 ± 0.03 for dyed and 4 ± 0.02 to 4/5 ± 0.03 for printed fabrics), and perspiration fastness (from 3 ± 0.02 to 4 ± 0.03 for acidic dyed and 3/4 ± 0.02 to 4 ± 0.02 for alkaline printed fabrics). Additionally, tear strengths improved significantly (from 13.66 ± 0.04 N/m to 20.53 ± 0.06 N/m for warp dyed and 10.85 ± 0.06 N/m to 15.14 ± 0.06 N/m for warp printed fabrics), along with tensile strengths (from 327 ± 5.38 N/m to 361 ± 3.26 N/m for warp dyed and 357 ± 5.34 N/m to 449 ± 4.90 N/m for warp printed fabrics). These improvements correlated with increasing CAB moles as a chain extender. This research presents a cost-effective and simple biobased method for textile finishing, offering an alternative to petrochemical-based monomers in conventional WPUD preparation.