Evaluation of a Volume-Averaged Species Transport Model with Micro-Macro Coupling for Breakthrough Curve Prediction.

In porous water filters, the transport and entrapment of contaminants can be modeled as a classic mass transport problem, which employs the conventional convection-dispersion equation to predict the transport of species existing in trace amounts. Using the volume-averaging method (VAM), the upscaling has revealed two possible macroscopic equations for predicting contaminant concentrations in the filters. The first equation is the classical convection-dispersion equation, which incorporates a total dispersion tensor. The second equation involves an additional transport coefficient, identified as the adsorption-induced vector. In this study, the aforementioned equations were solved in 1D for column tests using 3D unit cells. The simulated breakthrough curves (BTCs), using the proposed micro-macro-coupling-based VAM model, are compared with the direct numerical simulation (DNS) results based on BCC-type unit cells arranged one-after-another in a daisy chain manner, as well as with three previously reported experimental works, in which the functionalized zeolite and zero-valent iron fillings were used as an adsorbent to remove phosphorous and arsenic from water, respectively. The disagreement of VAM BTC predictions with DNS and experimental results reveals the need for an alternative closure formulation in VAM. Detailed investigations reveal time constraint violations in all the three cases, suggesting this as the main cause of VAM's failure.

Enhancing the Separation Performance of Cellulose Membranes Fabricated from 1-Ethyl-3-methylimidazolium Acetate by Introducing Acetone as a Co-Solvent.

Cellulose, a sustainable raw material, holds great promise as an ideal candidate for membrane materials. In this work, we focused on establishing a low-cost route for producing cellulose microfiltration membranes by adopting a co-solvent system comprising the ionic liquid 1-ethyl-3-methylimidazolium acetate ([EMIM]OAc) and acetone. The introduction of acetone as a co-solvent into the casting solution allowed control over the viscosity, thereby significantly enhancing the morphologies and filtration performances of the resulting cellulose membranes. Indeed, applying this co-solvent allowed the water permeability to be significantly increased, while maintaining high rejections. Furthermore, the prepared cellulose membrane demonstrated excellent fouling resistance behavior and flux recovery behavior during a challenging oil-in-water emulsion filtration. These results highlight a promising approach to fabricate high-performance cellulose membranes.

Hydrophilic Modification of Polytetrafluoroethylene (PTFE) Capillary Membranes with Chemical Resistance by Constructing Three-Dimensional Hydrophilic Networks.

Polytetrafluoroethylene (PTFE) capillary membranes, known for the great chemical resistance and thermal stability, are commonly used in membrane separation technologies. However, the strong hydrophobic property of PTFE limits its application in water filtration. This study introduces a method whereby acrylamide (AM), N, N-methylene bisacrylamide (MBA), and vinyltriethoxysilane (VTES) undergo free radical copolymerization, followed by the hydrolysis-condensation of silane bonds, resulting in the formation of hydrophilic three-dimensional networks physically intertwined with the PTFE capillary membranes. The modified PTFE capillary membranes prepared through this method exhibit excellent hydrophilic properties, whose water contact angles are decreased by 24.3-61.2%, and increasing pure water flux from 0 to 1732.7-2666.0 L/m2·h. The enhancement in hydrophilicity of the modified PTFE capillary membranes is attributed to the introduction of hydrophilic groups such as amide bonds and siloxane bonds, along with an increase in surface roughness. Moreover, the modified PTFE capillary membranes exhibit chemical resistance, maintaining the hydrophilicity even after immersion in strong acidic (3 wt% HCl), alkaline (3 wt% NaOH), and oxidative (3 wt% NaClO) solutions for 2 weeks. In conclusion, this promising method yields modified PTFE capillary membranes with great hydrophilicity and chemical resistance, presenting substantial potential for applications in the field of water filtration.

In situ habitat clearance rates and particle size preference of indigenous Olympia oysters (Ostrea lurida) and non-native Pacific oysters (Magallana gigas) in North American Pacific coast estuaries.

The Olympia oyster, Ostrea lurida, is the target of many restoration projects along estuaries on the North American Pacific coast, while the non-native Pacific oyster, Magallana gigas, dominates oyster aquaculture globally. Both species provide filtration functions that were investigated in three California bays using a whole-habitat, in situ approach, a laboratory particle selection experiment, and a regional physiological comparison. Measurements of chlorophyll α, temperature, salinity, and turbidity upstream and downstream, as well as point samples of seston total particulate matter and organic content to estimate habitat clearance rates (HCR, L hr-1 m-2) were collected. From February 2018 to June 2019, twenty-two trials were conducted across four sites. HCRs were highly variable within and among sites, ranging from site averages of -464 to 166 L hr-1 m-2, and not significantly different among sites, indicating field filtration performance of O. lurida habitat and M. gigas aquaculture is similar. Using a random forest regression, site was the most important predictor of HCR, with a variable importance score of 25.7 % (SD = 4.6 %). O. lurida and M. gigas had significantly different particle size selection preferences, likely affecting the quality of their filtration. This study's findings suggest that restoring O. lurida habitat may provide similar filtration benefits as M. gigas aquaculture, but the unique hydrodynamics and food quality of individual bays, as well as regional differences in filter feeder communities, must be considered in managing oyster habitat for filtration functions.

Method Based on Ultrafiltration to Obtain a Plasma Rich in Platelet and Plasma Growth Factors.

Platelet-Rich Plasma (PRP) is an autologous biological product which, due to its regenerative capacity, is currently used in different fields of medicine. This biological treatment has proven to be effective in numerous research studies due to its high content of growth factors released by platelets. However, the current systems used to obtain PRP do not enrich the growth factors and cytokines outside platelets. Considering this, the present work aims to develop a new technique by which all the biomolecules present in plasma are enriched. Thus, a new method based on ultrafiltration has been developed for the obtaining of the novel PRP. By this method, ultrafiltration of the plasma water is carried out using a 3KDa filtering unit. The results showed that the technique was able to concentrate extraplatelet factors, such as IGF-1 and HGF, in contrast with conventional plasmas. Thus, the cultured cells responded with increased viability to this new PRP. These results could provide a new approach to the treatment of injuries requiring regenerative medicine, potentially improving the outcomes of the conventional PRPs.

Manganese Removal Using Functionalised Thiosalicylate-Based Ionic Liquid: Water Filtration System Application.

Aiming at the generation of new functionalised thiosalicylate-based ionic liquids, a polymeric hydrogel consisting of 1-hexylimidazole propionitrile thiosalicylate [HIMP][TS], with a solid biomaterial support based on polyvinyl alcohol (PVA)-alginate beads, was produced. This study aimed to develop a treatment method for removing manganese (Mn) heavy metal from industrial wastewater, which is known to be toxic and harmful towards the environment and human health. The method utilised an adsorption-based approach with an alginate adsorbent that incorporated a functionalised thiosalicylate-based ionic liquid. The synthesised smooth round beads of PVA-alginate-[HIMP][TS] adsorbent were structurally characterised using Fourier transform infrared spectroscopy (FTIR) and field emission scanning electron microscopy (FESEM). The Mn concentration and removal efficiency were evaluated using atomic absorption spectroscopy (AAS). Three important parameters were evaluated: pH, adsorbent dosage, and contact time. During optimisation using the interactive factor design of experiments through the Box-Behnken model, the results showed that the system achieved a maximum Mn removal efficiency of 98.91% at an initial pH of 7.15, with a contact time of 60 min, using a bead dosage of 38.26 g/L. The beads were also tested in an available water filtration prototype system to illustrate their industrial application, and the performance showed a removal efficiency of 99.14% with 0 NTU total suspended solid (TSS) and 0.13 mg/L turbidity analysis. The recyclability of PVA-alginate-[HIMP][TS] beads using 0.5 M HCl resulted in four cycles with constant 99% Mn removal. The adsorption capacity of Mn was also determined in optimum conditions with 56 mg/g. Therefore, the alginate-thiosalicylate-based ionic liquid system is considered an effective and environmentally friendly method for removing Mn heavy metal due to the high removal efficiency achieved.

Enhancing Mechanical Properties and Flux of Nanofibre Membranes for Water Filtration.

Nanofibres have gained attention for their highly porous structure, narrow pore size, and high specific surface area. One of the most efficient techniques for producing nanofibres is electrospinning. These fibres are used in various fields, including water filtration. Although they possess the ability to filter various components, the fibres generally have low mechanical strength, which can mitigate their performance over time. To address this, studies have focused on enhancing nanofibre membrane strength for water filtration. Previous analyses show that the mechanical properties of nanofibre mats can be improved through solvent vapour treatment, thermal treatment, and chemical crosslinking. These treatments promote interfibre bonding, leading to the improvement of mechanical strength. However, excessive treatment alters nanofibre behaviour. Excessive heat exposure reduces interfibre bonding, while too much solvent vapour decreases pore size and mechanical strength. Thus, a comprehensive understanding of these post-treatments is crucial. This review examines post-treatments aiming to increase the mechanical strength of nanofibre mats, discussing their advantages and disadvantages. Understanding these treatments is essential for optimising nanofibre membrane performance in water filtration and other applications.

Surface Treatment of Polymer Membranes for Effective Biofouling Control.

Membrane biofouling is the consequence of the deposition of microorganisms on polymer membrane surfaces. Polymeric membranes have garnered more attention for filtering and purifying water because of their ease of handling, low cost, effortless surface modification, and mechanical, chemical, and thermal properties. The sizes of the pores in the membranes enable micro- and nanofiltration, ultrafiltration, and reverse osmosis. Commonly used polymers for water filter membranes are polyvinyl chloride (PVA), polyvinylidene fluoride (PVDF), polyamide (PA), polyethylene glycol (PEG), polyethersulfone (PES), polyimide (PI), polyacrylonitrile (PAN), polyvinyl alcohol (PA), poly (methacrylic acid) (PMAA), polyaniline nanoparticles (PANI), poly (arylene ether ketone) (PAEK), polyvinylidene fluoride polysulfone (PSF), poly (ether imide) (PEI), etc. However, these polymer membranes are often susceptible to biofouling because of inorganic, organic, and microbial fouling, which deteriorates the membranes and minimizes their lives, and increases operating costs. Biofouling infection on polymer membranes is responsible for many chronic diseases in humans. This contamination cannot be eliminated by periodic pre- or post-treatment processes using biocides and other chemicals. For this reason, it is imperative to modify polymer membranes by surface treatments to enhance their efficiency and longevity. The main objective of this manuscript is to discuss application-oriented approaches to control biofouling on polymer membranes using various surface treatment methods, including nanomaterials and fouling characterizations utilizing advanced microscopy and spectroscopy techniques.

Modification of 3D-Printed PLA Structures Using Photo-Iniferter Polymerization: Toward On-Demand Antimicrobial Water Filters.

Water filtration is an important application to ensure the accessibility of clean drinking water. As requirements and contaminants vary on a local level, adjustable filter devices and their evaluation with contaminants are required. Within this work, modular filter devices are designed featuring an adjustable surface functionalization. For this purpose, 3D-printed structures are created consisting of bio-based poly(lactic acid) (PLA) that are manufactured by extrusion printing. The surface of PLA is activated with amino groups that are used to install xanthates as chain transfer agents. Subsequently, photo-iniferter (PI) polymerization is used to create cationic polymer brushes on the surface of PLA substrates. Multiple surface characterization techniques are employed to prove successful growth of polymer brushes on PLA. After initial optimization studies on flat surfaces, filter devices are printed, functionalized, and used to remove bacteria from contaminated water. Significant reduction of the number of microorganisms is detected after filtration (single filtration or cycling) and contaminating organism can also be removed from freshwater samples by simple incubation with a 3D-printed filter. The herein developed setup for producing functional filter devices and probing their performance in affinity filtration is a useful platform technology, enabling the rapid testing of polymer brushes for such applications.

Postsynthetic Modification of Core-Shell Magnetic Covalent Organic Frameworks for the Selective Removal of Mercury.

Core-shell magnetic covalent organic framework (COF) materials were prepared, followed by shell material functionalization with different organic ligands, including thiosemicarbazide, through a postsynthetic modification approach. The structures of the prepared samples were characterized with various techniques, including powder X-ray diffraction (PXRD), Brunauer-Emmett-Teller (BET) method, thermogravimetric analysis (TGA), photoinduced force microscopy (PiFM), transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and solid 13C NMR. PXRD and BET studies revealed that the crystalline and porous nature of the functionalized COFs was well maintained after three steps of postsynthetic modification. On the other hand, solid 13C NMR, TGA, and PiFM analyses confirmed the successful functionalization of COF materials with good covalent linkage connectivity. The use of the resulting functionalized magnetic COF for selective and ultrafast adsorption of Hg(II) has been investigated. The observations displayed rapid kinetics with adsorption dynamics conforming to the quasi-second-order kinetic model and the Langmuir adsorption model. Furthermore, this prepared crystalline magnetic material demonstrated a high Langmuir Hg(II) uptake capacity, reaching equilibrium in only 5 min. Thermodynamic calculations proved that the adsorption process is endothermic and spontaneous.

Phytophthora, Nothophytophthora and Halophytophthora diversity in rivers, streams and riparian alder ecosystems of Central Europe.

Waterways are ideal pathways for Phytophthora dispersal and potential introduction to terrestrial ecosystems. While many Phytophthora species from phylogenetic clades 6, 9 and 10 are predominant oomycetes in watercourses due to their adaptation to a lifestyle as saprotrophs and opportunistic pathogens of riparian plants, species from clades 2, 7 and 8 are predominantly soil- or airborne using aquatic habitats as temporal niches for spreading and invading terrestrial sites along the watercourses. In contrast to forest ecosystems, knowledge of Phytophthora diversity in watercourses in Central Europe is limited. Between 2014 and 2019 extensive surveys of streams and rivers were undertaken across Austria, in South Moravia, Czech Republic and Zilina province, Slovakia to unveil the diversity and distribution of Phytophthora and related oomycetes. In addition, in Austria riparian forests of black alder (Alnus glutinosa) and grey alder (A. incana) in lowlands and in the Alps were examined. A variety of Phytophthora species from clades 2, 6, 7, 8, 9 and 10 were isolated, with clade 6 species showing the widest distribution and abundance. Furthermore, interspecific clade 6 hybrids and other oomycetes such as Halophytophthora fluviatilis and undescribed Nothophytophthora spp. were also obtained. In riparian alders, symptoms of Phytophthora infections were associated with species from the P. × alni complex and P. plurivora. Phytophthora plurivora was most common in alder stands whereas P. uniformis was the oomycete species occurring at the highest altitude in alpine riparian areas. Supplementary Information: The online version contains supplementary material available at 10.1007/s11557-023-01898-1.

Fast Water Transport through Subnanometer Diameter Vertically Aligned Carbon Nanotube Membranes.

Small-diameter carbon nanotubes (CNTs) have outstanding mass-transport properties, especially enhanced water flow. Here, we report on water transport through the first macroscopic membranes with vertically oriented, subnanometer (0.8 nm) CNT pores, made by a scalable, solution-based method with electric-field alignment of bulk-grown single-wall CNTs (SWCNTs). After plasma etching to open pores, vertically aligned CNTs served as the primary pathway for liquid-water transport. The CNT membranes showed fast pressure-driven water transport, with up to 105-fold enhancement compared to no-slip Hagen-Poiseuille flow. Comparing 0.8 and 3 nm CNTs, we found that the hydrodynamic slip lengths increased with decreasing nanotube diameter, reaching 8.5 µm for the smaller-diameter CNTs. The results suggest that pressure-driven water transport in small-diameter CNTs is increasingly dominated by entrance resistance, thus becoming independent of nanotube length. Scalably fabricated membranes incorporating vertically aligned subnanometer CNT pores could have applications in water filtration, desalination, and energy harvesting.

Comparative reductions of norovirus, echovirus, adenovirus, Campylobacter jejuni and process indicator organisms during water filtration in alluvial sand.

Sand filtration is a cost-effective means of reducing microbial pathogens in drinking-water treatment. Our understanding of pathogen removal by sand filtration relies largely on studies of process microbial indicators, and comparative data from pathogens are sparse. In this study, we examined the reductions of norovirus, echovirus, adenovirus, bacteriophage MS2 and PRD1, Campylobacter jejuni, and Escherichia coli during water filtration through alluvial sand. Duplicate experiments were conducted using 2 sand columns (50 cm long, 10 cm diameter) and municipal tap water sourced from chlorine-free untreated groundwater (pH 8.0, 1.47 mM) at filtration rates of 1.1-1.3 m/day. The results were analysed using colloid filtration theory and the HYDRUS-1D 2-site attachment-detachment model. The average log10 reduction values (LRVs) of the normalised dimensionless peak concentrations (Cmax/C0) over 0.5 m were: MS2: 0.28; E. coli: 0.76; C. jejuni: 0.78; PRD1: 2.00; echovirus: 2.20; norovirus: 2.35; and adenovirus: 2.79. The relative reductions largely corresponded to the organisms' isoelectric points rather than their particle sizes or hydrophobicities. MS2 underestimated virus reductions by 1.7-2.5 log, and the LRVs, mass recoveries relative to bromide, collision efficiencies, and attachment and detachment rates differed mostly by ∼1 order of magnitude. Conversely, PRD1 reductions were comparable with those of all 3 viruses tested, and its parameter values were mostly within the same orders of magnitude. E. coli seemed an adequate process indicator for C. jejuni with similar reductions. Comparative data describing pathogen and indicator reductions in alluvial sand have important implications for sand filter design, risk assessments of drinking-water supplies from riverbank filtration and the determination of safe setback distances for drinking-water supply wells.

Emulsion Assembly of Graphene Oxide/Polymer Composite Membranes.

Graphene oxide/polymer composite water filtration membranes were developed via coalescence of graphene oxide (GO) stabilized Pickering emulsions around a porosity-generating polymer. Triptycene poly(ether ether sulfone)-CH2NH2:HCl polymer interacts with the GO at the water-oil interface, resulting in stable Pickering emulsions. When they are deposited and dried on polytetrafluoroethylene substrate, the emulsions fuse to form a continuous GO/polymer composite membrane. X-ray diffraction and scanning electron microscopy demonstrate that the intersheet spacing and thickness of the membranes increased with increasing polymer concentration, confirming the polymer as the spacer between the GO sheets. The water filtration capability of the composite membranes was tested by removing Rose Bengal from water, mimicking separations of weak black liquor waste. The composite membrane achieved 65% rejection and 2500 g m-2 h-1 bar-1. With high polymer and GO loading, composite membranes give superior rejection and permeance performance when compared with a GO membrane. This methodology for fabrication membranes via GO/polymer Pickering emulsions produces membranes with a homogeneous morphology and robust chemical separation strength.

Potential Applications of Thermoresponsive Poly(N-Isoproplacrylamide)-Grafted Nylon Membranes: Effect of Grafting Yield and Architecture on Gating Performance.

This study illustrated the potential applications of thermoresponsive poly(N-isopropylacrylamide) (PNIPAm) grafted nylon membranes with different grafting yields and grafting architecture. The thermoresponsive gating performance at temperatures below and above the lower critical solution temperature (LCST) of PNIPAm (32 °C) were demonstrated. The linear PNIPAm-grafted nylon membrane exhibited a sharp response over the temperature range 20-40 °C. The grafting yield of 25.5% and 21.9%, for linear and crosslinked PNIPAm respectively, exhibited highest thermoresponsive gating function for water flux and had a stable and repeatable "open-closed" switching function over 5 cycle operations. An excellent oil/water separation was obtained at T < 32 °C, at which the hydrophilic behavior was observed. The linear PNIPAm-grafted nylon membrane with 35% grafting yield had the highest separation efficiency of 99.7%, while PNIPAm structures were found to be independent of the separation efficiency. In addition, the membranes with thermoresponsive gas permeability were successfully achieved. The O2 and CO2 transmission rates through the PNIPAm-grafted nylon membranes decreased when the grafting yield increased, showing the better gas barrier property. The permeability ratio of CO2 to O2 transmission rates of both PNIPAm architectures at 25 °C and 35 °C were around 0.85 for low grafting yields, and approximately 1 for high grafting yields. Ultimately, this study demonstrated the possibility of using these thermoresponsive smart membranes in various applications.

Design and Manufacturing of Antibacterial Electrospun Polysulfone Membranes Functionalized by Ag Nanocoating via Magnetron Sputtering.

Antibacterial properties of engineered materials are important in the transition to a circular economy and societal security, as they are central to many key industrial areas, such as health, food, and water treatment/reclaiming. Nanocoating and electrospinning are two versatile, simple, and low-cost technologies that can be combined into new advanced manufacturing approaches to achieve controlled production of innovative micro- and nano-structured non-woven membranes with antifouling and antibacterial properties. The present study investigates a rational approach to design and manufacture electrospun membranes of polysulfone (PSU) with mechanical properties optimized via combinatorial testing from factorial design of experiments (DOE) and endowed with antimicrobial silver (Ag) nanocoating. Despite the very low amount of Ag deposited as a conformal percolating nanocoating web on the polymer fibers, the antimicrobial resistance assessed against the Gram-negative bacteria E. coli proved to be extremely effective, almost completely inhibiting the microbial proliferation with respect to the reference uncoated PSU membrane. The results are relevant, for example, to improve antifouling behavior in ultrafiltration and reverse osmosis in water treatment.

A PLS-SEM Analysis to Check Public Willingness to Use Water from Filtration Plants Installed by Public Own Organizations; a Study of Psychological Behavior Toward Sustainable Development.

Introduction: Water is the basic need of human beings and there is no substitute for water. This research was conducted to analyze public willingness to use water from filtration plants installed by public own Organizations and which psychological factors may help them to decide to use safe water. Methods: There ought to be some nudges in the right direction to encourage people to use water filters. A questionnaire was adopted from the literature for this research. PLS-SEM is used to evaluate data to check the connection among variables since it is the most recommended way for assessing and predicting explained variables to account for the largest latent variance, and PLS-SEM is one of the most effective approaches for predicting outcomes. Results: PLS-SEM direct path analysis revealed that hypotheses H1-H6 were accepted and the gender and levels of education of the respondents as control variables, gender and education showed insignificant relationships with WUFWFP. Age showed a substantial relationship as a moderator variable between WQK*Age, and HC*Age with a willingness to use filter water from filtration plants=WUFWFP, while the rest of the variables showed an insignificant relationship. Discussion: As per our results, H1a and H3a have a significant relationship as moderator variables between IV and DV, while H2a, H4a, H5a, and H6a did not show any relationship as moderator variables between IV and DV. Hence H1a and H3a were accepted while the rest of the moderator was rejected under this research. This study would be helpful for the decision-makers and planners to take proper sustainable measures to address the repercussions of urbanization and land use changes to protect the ecosystem.

A New Culture Method for the Detection of Non-Tuberculous Mycobacteria in Water Samples from Heater-Cooler Units and Extracorporeal Membrane Oxygenation Machines.

The isolation of non-tuberculous mycobacteria (NTM) from cultures is particularly laborious due to the potential overgrowth of coexisting non-acid fast bacilli. To reduce the overgrowth of these non-mycobacterial organisms, a decontamination step with NaOH or cetylpyridinium chloride is highly recommended before plating the samples on the culture medium. However, due to their toxicity, decontamination solutions tend to decrease NTM recovery from clinical and environmental samples. Here, we tested an alternative method for NTM recovery based on the use of NTM Elite agar, a selective medium that does not require a decontamination step. Using NTM Elite agar, we were able to detect non-tuberculous mycobacteria in 27.7% (30/108) of water samples analyzed. The average time to NTM detection was 18 days, but some strains required longer to grow, perhaps due to the stressful environmental conditions (periodical disinfection of devices). NTM Elite agar's effectiveness in inhibiting background flora was proven by the isolation of NTM from samples with and without background flora, showing no statistically significant differences in detection rates for different total viable counts of background flora (p = 0.4989). In conclusion, our findings indicate that effective NTM recovery from HCU- and ECMO-derived water samples can be achieved via filtration and direct culture of the filters on NTM Elite agar. This simple procedure can speed up laboratory work and provide an improved method, successfully resulting in low contamination and high detection rate, in addition to being less time-consuming. Its sensitivity and lack of a decontamination step make this protocol particularly useful for monitoring the effectiveness of device disinfection in hospital settings, even in the presence of low NTM loads. Reading timeframes should probably be extended to 7 weeks (i.e., well beyond the standard 4 weeks advised by the manufacturer), in order to isolate even the slow-growing mycobacteria. However, an extended incubation period is not necessary for exclusion of M. chimaera contamination of the devices, as M. chimaera isolation times do not generally exceed 3 weeks.

Recent Development and Environmental Applications of Nanocellulose-Based Membranes.

Extensive research and development in the production of nanocellulose production, a green, bio-based, and renewable biomaterial has paved the way for the development of advanced functional materials for a multitude of applications. From a membrane technology perspective, the exceptional mechanical strength, high crystallinity, tunable surface chemistry, and anti-fouling behavior of nanocellulose, manifested from its structural and nanodimensional properties are particularly attractive. Thus, an opportunity has emerged to exploit these features to develop nanocellulose-based membranes for environmental applications. This review provides insights into the prospect of nanocellulose as a matrix or as an additive to enhance membrane performance in water filtration, environmental remediation, and the development of pollutant sensors and energy devices, focusing on the most recent progress from 2017 to 2022. A brief overview of the strategies to tailor the nanocellulose surface chemistry for the effective removal of specific pollutants and nanocellulose-based membrane fabrication approaches are also presented. The major challenges and future directions associated with the environmental applications of nanocellulose-based membranes are put into perspective, with primary emphasis on advanced multifunctional membranes.

A two-step bioluminescence assay for optimizing antibacterial coating of hollow-fiber membranes with polydopamine in an integrative approach.

Pure-water filtration membranes are often fouled by bacterial biofilms. Antibacterial coatings for preventing biofilm formation on such membranes should not rely on leaching of inhibiting compounds but should only be effective on surface contact. Certified assays for antibacterial coatings do not sufficiently exclude leaching effects and involve nutrient-rich cultivation media that do not correspond to conditions in pure-water systems. In this study, a two-step bioluminescence assay was developed for optimizing an antibacterial coating of PES/PVP ultrafiltration hollow-fiber membranes with a polydopamine as a sustainable, bio-inspired material for preventing bacterial biofilm formation. In the first step, leaching of the antimicrobial coating was analyzed by a bioluminescence assay with supernatants generated by washing coated membranes. In the second step, bioluminescence of bacterial biofilms on coated and uncoated membranes was measured using a nutrient-poor medium resembling site-specific conditions. Based on this bioluminescence assay, an optimized protocol for the coating process could be established by acidic polymerization of dopamine using 2 g/L sodium periodate and 4 g/L dopamine at 40 °C for 20 min reaction time. With coatings produced in this way, bioluminescence was reduced on coated membranes only while the corresponding supernatants exhibited no inhibitory effects.