Architecture dependent transport behavior of iron (0) entrapped biodegradable polymeric particles for groundwater remediation.

Polylactic acid based spherical particles with three architectural variations (Isotropic (P1), Semi porous (P2), and Janus (P3)) were employed to encapsulate zero valent iron nanoparticles (ZVINPs), and their performance was extensively evaluated in our previous studies. However, little was known about their transportability through saturated porous media of varying grain size kept under varying ionic strength. In this particular study, we aimed to investigate the architectural effect of polymeric particles (P1-P3) on their mobility through the sand column of varying grain size in presence of mono, di, and tri-valent ions of varying concentrations (25-200 mM (millimoles)). As per column breakthrough experiments (BTCs) using various types of sands, amphiphilic Janus type (P3) particles exhibited the maximum transportability among all the tested particles, irrespective of the nature of the sand. Owing to the narrower travel path, sands with lower porosity (31%) delayed the plateau by shifting it to a higher pore volume with a minimum retention of iron (C/Co: 0.94 for P3) in the column. The impact of mono (Na+, K+), di (Ca2+, Mg2+), and trivalent (Al3+) ions on their transportability was progressively increased from P3 to P1, especially at higher ionic concentrations (200 mM), with P3 being the most mobile particles (C/Co:0.54 for Al3+). Among all the ions, Al3+ exhibited maximum hindrance to their mobility through the sand column. This could be due to their strong charge screening effect coupled with cation bridging complex formation with moving particles. Experimental results obtained from BTCs were found to be well-fitted with a theoretical model based on advection-dispersion equation, showing minimum retention for P3 particles. Overall, it can be inferred that encapsulation of ZVINPs inside Janus particles (P3) with a right balance of amphiphilicity and highly negative surface charge would be required to achieve considerable transportability through sand aquifers to target contaminants in polluted groundwater existing under harsh conditions (high ionic concentrations).

Highly effective removal of 4-chloroaniline in water by nano zero-valent iron cooperated with microbial degradation.

The misuse of aromatic amines like 4-chloroaniline (4-CA) has led to severe environmental and health issues. However, it's difficult to be utilized by microorganisms for degradation. Nano-zero-valent iron (nZVI) is a promising material for the remediation of chloroaniline pollution, however, the synergistic effect and mechanism of nZVI with microorganisms for the degradation of 4-CA are still unclear. This study investigated the potential of 4-CA removal by the synergistic system involving nZVI and 4-CA degrading microbial flora. The results indicate that the addition of nZVI significantly enhanced the bio-degradation rate of 4-CA from 43.13 % to 62.26 %. Under conditions involving 0.1 % nZVI addition at a 24-hour interval, pH maintained at 7, and glucose as an external carbon source, the microbial biomass, antioxidant enzymes, and dehydrogenase were significantly increased, and the optimal 4-CA degradation rate achieved 68.79 %. Additionally, gas chromatography-mass spectrometry (GC-MS) analysis of intermediates indicated that the addition of nZVI reduced compounds containing benzene rings and enhanced the dechlorination efficiency. The microbial community remained stable during the 4-CA degradation process. This study illustrates the potential of nZVI in co-microbial remediation of 4-CA compounds in the environment.

Hexavalent chromium ion removal from wastewater using novel nanocomposite based on the impregnation of zero-valent iron nanoparticles into polyurethane foam.

In this study, we developed a novel nanocomposite, polyurethane foam impregnated with zero-valent iron nanoparticles (PU@nZVI), for the effective removal of chromium(VI) from various water sources. The characterization of nanocomposite (PU@nZVI) was performed by XRD, SEM-EDS, TEM and FT-IR techniques. Using the response surface methodology, we optimized the removal conditions, achieving an optimal pH of 2 and a dose of 0.5 g/L. The PU@nZVI demonstrated an excellent maximum adsorption capacity of 600.0 mg/g for Cr6+. The adsorption kinetics and isotherms were best described by the pseudo-second-order model and the Freundlich isotherm, respectively. Significantly, the nanocomposite removed 99.98% of Cr6+ from tap water, 96.81% from industrial effluent, and 94.57% from treated sewage wastewater. Furthermore, the PU@nZVI maintained its efficiency over five adsorption-desorption cycles, highlighting its reusability. These results suggest that the PU@nZVI nanocomposite is a highly efficient and sustainable option for chromium(VI) removal in water treatment applications.

Facilitating effects of the synergy with zero-valent iron and peroxysulfate on the sludge anaerobic fermentation system: Combined biological enzyme, microbial community and fermentation mechanism assessment.

This study evaluated a synergetic waste activated sludge treatment strategy with environmentally friendly zero-valent iron nanoparticles (Fe0) and peroxysulfate. To verify the feasibility of the synergistic treatment, Fe0, peroxysulfate, and the mixture of peroxysulfate and Fe0 (synergy treatment) were added to different sludge fermentation systems. The study demonstrated that the synergy treatment fermentation system displayed remarkable hydrolysis performance with 435.50 mg COD/L of protein and 197.67 mg COD/L of polysaccharide, which increased 1.13-2.85 times (protein) and 1.12-1.49 times (polysaccharide) for other three fermentation system. Additionally, the synergy treatment fermentation system (754.52 mg COD/L) exhibited a well acidification performance which was 1.35-41.73 times for other systems (18.08-557.27 mg COD/L). The synergy treatment fermentation system had a facilitating effect on the activity of protease, dehydrogenase, and alkaline phosphatase, which guaranteed the transformation of organic matter. Results also indicated that Comamonas, Soehngenia, Pseudomonas, and Fusibacter were enriched in synergy treatment, which was beneficial to produce SCFAs. The activation of Fe0 on peroxysulfate promoting electron transfer, improving the active groups, and increasing the enrichment of functional microorganisms showed the advanced nature of synergy treatment. These results proved the feasibility of synergy treatment with Fe0 and peroxysulfate to enhance waste activated sludge anaerobic fermentation.

Influence of zero-valent iron nanoparticles on anaerobic digestion of swine manure: effects on methane yield.

This study evaluated the effect of zero-valent iron nanoparticles (NZVI) on the anaerobic digestion of swine manure. A wide range of doses of NZVI was evaluated (5, 10, 15, 20, 25, 50, and 100 mgFe°/gVS). The maximum methane yield of 0.4506 L/gVSremoved was obtained with the concentration of 10 mgFe°/gVS representing an increase of 58.99% than the control system with 0.2834 L/gVSremoved, indicating that Fe° improves the methanogenic activity. However, when using doses greater than 20 mgFe°/gVS, there were decreases in the methane yield of 34.4-47.98%. Also, to observe the effect of NZVI in anaerobes was evaluated the activity in the electron transport system (ETS), where the control reactor showed an activity of 31.91 µg INTred/gVS•h, while in reactors with NZVI showed values of 39.48 µg INTred/gVS•h (10 Fe°mg/gVS), observing a stimulation of Fe° in microbial activity. However, the dose of 100 mgFe°/gVS showed the greatest decrease in methane yield (0.1474 L/gVSremoved) and a reduction in ETS was observed by 8.5% compared to the control. The effect on the composition of the volatile fatty acids was observed, where the control system obtained a maximum production of acetic acid of 639 mg/L, which was exceeded with the dose of 10 mg Fe°/gVS by 215% and a decrease of 41.15% with the inhibitory concentration of 100 mg Fe°/gVS. As a result, higher doses of NZVI affect the metabolic activity of anaerobes as well as the acetoclastic pathway causing a decrease in the methane production.

Study of the Stability, Uptake and Transformations of Zero Valent Iron Nanoparticles in a Model Plant by Means of an Optimised Single Particle ICP-MS/MS Method.

In the context of the widespread distribution of zero valent iron nanoparticles (nZVI) in the environment and its possible exposure to many aquatic and terrestrial organisms, this study investigates the effects, uptake, bioaccumulation, localisation and possible transformations of nZVI in two different forms (aqueous dispersion-Nanofer 25S and air-stable powder-Nanofer STAR) in a model plant-Arabidopsis thaliana. Seedlings exposed to Nanofer STAR displayed symptoms of toxicity, including chlorosis and reduced growth. At the tissue and cellular level, the exposure to Nanofer STAR induced a strong accumulation of Fe in the root intercellular spaces and in Fe-rich granules in pollen grains. Nanofer STAR did not undergo any transformations during 7 days of incubation, while in Nanofer 25S, three different behaviours were observed: (i) stability, (ii) partial dissolution and (iii) the agglomeration process. The size distributions obtained by SP-ICP-MS/MS demonstrated that regardless of the type of nZVI used, iron was taken up and accumulated in the plant, mainly in the form of intact nanoparticles. The agglomerates created in the growth medium in the case of Nanofer 25S were not taken up by the plant. Taken together, the results indicate that Arabidopsis plants do take up, transport and accumulate nZVI in all parts of the plants, including the seeds, which will provide a better understanding of the behaviour and transformations of nZVI once released into the environment, a critical issue from the point of view of food safety.

Zero-Valent Iron Nanoparticles: Biogenic Synthesis and their Medical Applications; Existing Challenges and Future Prospects.

OBJECTIVE: In the last decade, nanobiotechnology is emerging as a keen prudence area owing to its widespread applications in the medical field. In this context, zero-valent iron nanoparticles (nZVI) have garnered tremendous attention attributed to their cheap, non-toxic, excellent paramagnetic nature, extremely reactive surface, and dual oxidation state that makes them excellent antioxidants and free-radical scavengers. Facile biogenic synthesis, in which a biological source is used as a template for the synthesis of NPs, is presumably dominant among other physical and chemical synthetic procedures. The purpose of this review is to elucidate plant-mediated synthesis of nZVI, although they have been successfully fabricated by microbes and other biological entities (such as starch, chitosan, alginate, cashew nut shell, etc.) as well. METHODS: The methodology of the study involved keyword searches of electronic databases, including ScienceDirect, NCBI, and Google Scholar (2008-2023). Search terms of the review included 'biogenic synthesis of nZVI', 'plant-mediated synthesis of nZVI', 'medical applications of nZVI', and 'Recent advancements and future prospects of nZVI'. RESULTS: Various articles were identified and reviewed for biogenic fabrication of stable nZVI with the vast majority of studies reporting positive findings. The resultant nanomaterial found great interest for biomedical purposes such as their use as biocompatible anticancer, antimicrobial, antioxidant, and albumin binding agents that have not been adequately accessed in previous studies. CONCLUSION: This review shows that there are potential cost savings applications to be made when using biogenic nZVI for medical purposes. However, the encountering challenges concluded later, along with the prospects for sustainable future development.

Biosynthesis and Mathematical Interpretation of Zero-Valent Iron NPs Using Nigella sativa Seed Tincture for Indemnification of Carcinogenic Metals Present in Industrial Effluents.

Zero-valent iron nanoparticles (ZVI-NPs) are utilized for the indemnification of a wide range of environmental pollutants. Among the pollutants, heavy metal contamination is the major environmental concern due to their increasing prevalence and durability. In this study, heavy metal remediation capabilities are determined by the green synthesis of ZVI-NPs using aqueous seed extract of Nigella sativa which is a convenient, environmentally friendly, efficient, and cost-effective technique. The seed extract of Nigella sativa was utilized as a capping and reducing agent for the generation of ZVI-NPs. UV-visible spectrophotometry (UV-vis), scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDX), and Fourier transform infrared spectroscopy (FTIR) was used to investigate the ZVI-NP composition, shape, elemental constitution, and perspective functional groups, respectively. The biosynthesized ZVI-NPs displayed a peak of plasmon resonance spectra at 340 nm. The synthesized NPs were cylindrical in shape, with a size of 2 nm and (-OH) hydroxyl, (C-H) alkanes and alkynes N-C, N=C, C-O, =CH functional groups attached to the surface of ZVI-NPs. Heavy metals were successfully remediated from industrial wastewater collected from the various tanneries of Kasur. During the reaction duration of 24 h, different concentrations of ZVI-NPs (10 µg, 20 µg and 30 µg) per 100 mL were utilized for the removal of heavy metals from industrial wastewater. The 30 µg/100 mL of ZVI-NPs proved the pre-eminent concentration of NPs as it removed >90% of heavy metals. The synthesized ZVI-NPs were analyzed for compatibility with the biological system resulting in 87.7% free radical scavenging, 96.16% inhibition of protein denaturation, 60.29% and 46.13% anti-cancerism against U87-MG and HEK 293 cell lines, respectively. The physiochemical and exposure mathematical models of ZVI-NPs represented them as stable and ecofriendly NPs. It proved that biologically synthesized NPs from a seed tincture of Nigella sativa have a strong potential to indemnify heavy metals found in industrial effluent samples.

Metabolomic profiles reveals the dose-dependent effects of rice grain yield and nutritional quality upon exposure zero-valent iron nanoparticles.

Zero-valent iron nanoparticles (nZVI) were widely used material in environmental remediation, which has attracted increasing concern for their safety. Previous studies have shown that the addition of nZVI could inhibit rice seedling growth. However, the effect of nZVI on the soil-rice system during the entire life cycle was not reported. Furthermore, the effect of nZVI on the quality of rice grain has also not been studied. Therefore, we investigated the effects of rice grain yield and nutritional quality upon exposure nZVI. The results showed that the soil pH value, redox potential and Fe (II) content in the nZVI-treated group were decreased in a dose-dependent manner. Interestingly, 2500 mg/kg nZVI significantly decreased the relative abundance of several functional microbial communities (10.52-73.53 %) associated with carbon and nitrogen cycles in response to plants compared to the control. Meanwhile, the nZVI treatment clearly reduced grain yield (8.71-18.21 %). Furthermore, the content of protein (51.72-57.79 %) and several essential nutrients (Zn, Cu, Mn and Mo) in the nZVI-treated grains was also decreased in a dose-dependent manner. The results of grain metabolomics indicated that nZVI could interfere with the relative expression of lysine and glutathione by regulating the metabolic pathways of antioxidant and protein synthesis in rice.

Assessment of bimetallic Zn/Fe0 nanoparticles stabilized Tween-80 and rhamnolipid foams for the remediation of diesel contaminated clay soil.

Diesel contamination of soil due to oil spills, disposal of refinery waste, oil exploration constitutes a major environmental problem. This paper reports the remediation of diesel contaminated clay soil using Zn/Fe0 bimetallic nanoparticle stabilized Rhamnolipid (RMLP) and Tween-80 (TW-80) surfactant foams. Fe0, and Zn (x wt%)/Fe0 (x = 0.2, 2.0, and 10.0) bimetallic nanoparticles are synthesized by using sodium borohydride reduction method. The average particle size (from FESEM) is calculated to be 62, 57, 42 and 35 nm for the Fe0, Zn (0.2)/Fe0, Zn (2)/Fe0 and Zn (10)/Fe0 nanopowders, respectively. The highest foamability and foam stability of 109.6 and 108.5 mL, respectively are observed for the RMLP (12 mg/l) surfactant foam stabilized with 6 mg/l Zn (10)/Fe0 nanoparticles. The surface tension values reduce to the lowest value of 28.1 and 31.4 mN/m with the addition of 6 mg/l of Zn (10)/Fe0 powder in RMLP and TW-80 solutions of 12 mg/l, respectively. The maximum diesel removal efficiency of 83.8 and 59%, is achieved by RMLP (12 mg/l) foam stabilized by Zn (10)/Fe0 nanoparticles (6 mg/l) for the clay soil contaminated with 100 and 500 µl/g of diesel, respectively. The physicochemical properties of the nanoparticles are studied to explain the foam properties and the remediation behavior. These findings regarding the nanoparticle stabilized foams can offer a cost-effective environment friendly commercial solution for soil remediation in the future.

An assessment of the efficacy of biochar and zero-valent iron nanoparticles in reducing lead toxicity in wheat (Triticum aestivum L.).

Soil heavy metal contamination is increasing rapidly due to increased anthropogenic activities. Lead (Pb) is a well-known human carcinogen causing toxic effects on humans and the environment. Its accumulation in food crops is a serious hazard to food security. Developing environment-friendly and cost-efficient techniques is necessary for Pb immobilization in the soil. A pot experiment was executed to determine the role of biochar (BC), zero-valent iron nanoparticles (n-ZVI), and zero-valent iron nanoparticles biochar composite (n-ZVI-BC) in controlling the Pb mobility and bioaccumulation in wheat (Triticum aestivum L.). The results showed that BC and n-ZVI significantly enhanced the wheat growth by increasing their photosynthetic and enzymatic activities. Among all the applied treatments, the maximum significant (p ≤ 0.05) improvement in wheat biomass was with the n-ZVI-BC application (T3). Compared to the control, the biomass of wheat roots, shoots & grains increased by 92.5, 58.8, and 49.1%, respectively. Moreover, the soil addition of T3 amendment minimized the Pb distribution in wheat roots, shoots, and grains by 33.8, 26.8, and 16.2%, respectively. The outcomes of this experiment showed that in comparison to control treatment plants, soil amendment with n-ZVI-BC (T3) increased the catalase (CAT), superoxide dismutase (SOD) activity by 49.8 and 31.1%, respectively, ultimately declining electrolyte leakage (EL), malondialdehyde (MDA) and hydrogen peroxide (H2O2) content in wheat by 38.7, 33.3, and 38%respectively. In addition, applied amendments declined the Pb mobility in the soil by increasing the residual Pb fractions. Soil amendment with n-ZVI-BC also increased the soil catalase (CAT), urease (UR), and acid phosphatase (ACP) activities by 68, 59, and 74%, respectively. Our research results provided valuable insight for the remediation of Pb toxicity in wheat. Hence, we can infer from our findings that n-ZVI-BC can be considered a propitious, environment friendly and affordable technique for mitigating Pb toxicity in wheat crop and reclamation of Pb polluted soils.

Dissolved iron released from nanoscale zero-valent iron (nZVI) activates the defense system in bacterium Pseudomonas putida, leading to high tolerance to oxidative stress.

Nanoscale zero-valent iron (nZVI) has increasingly been applied to remediate aquifers polluted by organochlorines or heavy metals. As a result, bacteria in the vicinity of remediate action can be stressed by surplus iron released from nZVI. However, the understanding of the iron stress defense pathways during this process is currently incomplete. Therefore, we aimed to elucidate the physiological and transcriptomic response of the bacterium, Pseudomonas putida NCTC 10936, to 100 mg/L of nZVI and 44.5 µg/L of dissolved iron obtained from nZVI suspension. Cell viability was neither affected by nZVI nor dissolved iron, although the dissolved iron caused stress that altered the cell physiology and caused the generation of smaller cells, whereas cells were elongated in the presence of nZVI. Transcriptomic analysis confirmed the observed stronger physiological effect caused by dissolved iron (in total 3839 differentially expressed genes [DEGs]) than by nZVI (945 DEGs). Dissolved iron (but not nZVI) activated genes involved in oxidative stress-related pathways, antioxidant activity, carbohydrate and energy metabolism, but downregulated genes associated with flagellar assembly proteins and two-component systems involved in sensing external stimuli. As a result, bacteria very effectively faced oxidative insults and cell viability was not affected.

Influence of aggregation and sedimentation behavior of bare and modified zero-valent-iron nanoparticles on the Cr(VI) removal under various groundwater chemistry conditions.

Aggregation behaviors of bare, and sodium polyacrylate (PAA) and starch modified zero-valent-iron nanoparticles (nZVI), as well as their effects on the Cr (VI) removal were investigated by simulating the groundwater. Results showed that increased concentration of PAA (1-6 wt%) and starch (0.1-0.6 wt%) alleviated the aggregation of modified nZVI (abbreviated as P-nZVI and S-nZVI), while there was an optimum dosage of 4 wt% PAA and 0.3 wt% starch for the Cr (VI) removal, respectively. Moreover, as one of the fundamental water chemistry parameters, Ca2+ (0, 5, and 10 mg L-1) greatly promoted the aggregation of modified nZVI, and decreased the Cr (VI) removal efficiency by them via forming bidentate bridging structure (between Ca2+ and PAA) or complexes (between Ca2+ and starch). Additionally, fulvic acid (FA) (0, 2, 5, and 10 mg L-1) decreased the Cr (VI) removal by P-nZVI because of the significantly improved electronic repulsion. However, FA enhanced the aggregation of S-nZVI, but diminished its performance on Cr (VI) removal due to the bridging effect between FA and starch. The present study was of great importance in predicting the migration of nZVI and contaminants removal under complex geological conditions in groundwater.

Combining electrokinetic treatment with modified zero-valent iron nanoparticles for rapid and thorough dechlorination of trichloroethene.

In situ injection of nanoscale zero-valent iron (nZVI) slurry is a promising method to treat chlorinated solvents represented by trichloroethylene (TCE) in groundwater. In this study, the effects of sulfidation and emulsification treatment on the performance of nZVI reductive dechlorination of TCE under enhancement by an external electric field were evaluated. The hydrophobic oil film on the surface of sulfidized and emulsified zero-valent iron (S-EZVI) can sequestrate more than one-fifth of the unreacted TCE in the early stage of the experiment (at 5 min). The FeS layer formed on the surface of S-EZVI can facilitate the electron-transfer process and reduce the degree of corrosion of Fe0 with water by 94.0%. Electric-field-enhanced S-EZVI technology can remove more than 93.1% of TCE in the pH range 6.0-9.0, and the performances in overly acid and overly alkali environments both improved. Under the optimal conditions, the TCE removal rate and reaction constant of the applied electric field group reached 96.7% and 1.6 × 10-2 L g-1 min-1, respectively, which were much higher than those of the group without an electric field (53.2% and 3.3 × 10-3 L g-1 min-1) owing to rapid concurrent hydrogenolysis of dichloroethenes and vinyl chloride, or another transformation pathway, such as direct oxidation by the anode. Thereby, this method avoids accumulation of chlorinated intermediates, especially toxic vinyl chloride. This work shows that combination technology has many characteristics that are favorable for field application, and it is expected to provide a new reference and have application value for development of in situ efficient and thorough treatment of TCE-contaminated groundwater.

Green synthesis of zero-valent iron nanoparticles and loading effect on activated carbon for furfural adsorption.

The adsorption techniques are extensively used in dyes, metronidazole, aniline, wastewater treatment methods to remove certain pollutants. Furfural is organic in nature, considered a pollutant having a toxic effect on humans and their environment and especially aquatic species. Due to distinct characteristics of the adsorption technique, this technique can be utilized to adsorb furfural efficiently. As an environmentally friendly technique, the pomegranate peel was used to synthesized activated carbon and nanostructure of zerovalent iron impregnated on the synthesized activated carbon. The physicochemical and crystallinity characterization was done using Fourier transmission infrared spectroscopy (FTIR), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), and Field emission scanning electron microscopy (FESEM). The nanoparticles are porous in structure having 821.74 m2/g specified surface area. The maximum amount of the adsorbent pores in the range of 3.08 nm shows the microporous structure and enhancement in adsorption capacity. The effects of increment in concentration of adsorbent, pH, reaction contact time and adsorbent dose, isothermal and kinetic behaviour were investigated. At the UV wavelength of 227 nm furfural adsorption was detected. The separation of the furfural from the aqueous solution was calculated at the 1 h reaction time at the composite dosage of 4 g/L, 250 mg/L adsorbent concentration and pH kept at 7. The 81.87% is the maximum removal attained by the nanocomposite in comparison to the activated carbon is 62.06%. Furfural adsorption was also analyzed by using the equations of isothermal and kinetics models. The adsorption process analysis depends on the Freundlich isotherm and Intra-particle diffusion than the other models. The maximum adsorbent of the composite was determined by the Langmuir model which is 222.22 mg/g. The furfural removal enhances as the adsorbent dose enhances. The developed zerovalent iron nanoparticles incorporated on activated carbon (AC/nZVI) from pomegranate peel extract are feasible as an efficient and inexpensive adsorbent to eliminate furfural from a liquid solution.

Degradation of tetrachloroethylene by zero valent iron nanoparticles in the presence of a natural groundwater bacterial biofilm in a sandy porous media.

Biofilms are naturally present in aquifers and can interact with zero valent iron nanoparticles (nZVI) used as remediation agents in contaminated groundwater; thereby they may alter nZVI reactivity towards targeted contaminants in porous media. Laboratory scale experiments using columns filled with sand (50 cm long and 5.2 cm in diameter) were performed to investigate the impact of natural biofilms on nZVI reactivity towards tetrachloroethylene (PCE) in conditions simulating an unconsolidated sandy aquifer. Solutions containing PCE were injected through the sand columns in the presence or absence of biofilm and nZVI. Concentrations in PCE and its metabolites were monitored during 45 days in dissolved and gas phases. PCE concentrations decreased at the column outlets due both to its reductive dechlorination by nZVI (~30% of injected PCE) and its sorption or deposition (as PCE-DNAPL) on sand (~35% of injected PCE). No significant differences in PCE concentrations were found in presence or absence of biofilm. However, biofilm presence affected the nature of PCE metabolites. A higher release of ethene in the column containing biofilm was observed, whereas ethane was dominant in the absence of biofilm. Microbes consumed H2 released by the corrosion of nZVI limiting the hydrogenation of ethene to ethane. The consequences of biofilm development in porous media should be taken into account when considering treatment with nZVI, as it may affect the nature of produced metabolites.

Effect of Zero-valent Iron Nanoparticles and Melatonin on Yield and Quality of Fritillaria przewalskii in Domesticated Cultivation Conditions / 中国实验方剂学杂志

Objective:To investigate the effect of iron nanoparticles and melatonin on yield and quality of <italic>Fritillaria przewalskii</italic> and provide technical support for its domesticated cultivation. Method:Hundred grain weight was measured by conventional method；alkaloid content was detected according to protocols of the edition of 2020 <italic>Chinese Pharmacopoeia</italic>，chlorophyll，hydrogen peroxide，malondialdehyde，superoxide dismutase （SOD），peroxidase （POD） and catalase （CAT） were detected by spectrophotometric analysis，auxins，cytokinins，gibberellins，salicylic acid，jasmonic acid and abscisic acid were detected by ultra performance liquid chromatography tandem mass spectrometry analysis. Result:Zero-valent iron nanoparticles and melatonin significantly increased the hundred grain weight without affecting the quality. The effect of the two treatments on physiological and biochemical indexes in different stages were quite different，but the effects on content of endogenous hormones were basically the same. Correlation analysis showed that hundred grain weight was negatively correlated with malondialdehyde content，SOD activity and jasmonic acid content，but positively correlated with POD activity，salicylic acid content，gibberellins content，auxin content and abscisic acid content. The two treatments were separated effectively by principal component analysis，indicating that there were some differences in the mechanisms of growth promoting. The treatment of zero-valent iron nanoparticles mainly affected auxins，salicylic acid and abscisic acid. The treatment of melatonin mainly affected SOD，malondialdehyde and gibberellins. Conclusion:Zero-valent iron nanoparticles and melatonin can be used as a simple and practical technology to improve the stress resistance and yields of <italic>F. przewalskii</italic> in domesticated cultivation conditions.

Nanoremediation: Tiny Objects Solving Huge Environmental Problems.

BACKGROUND: The application of zero-valent iron nanoparticles (nZVI) to remediate soil and groundwater has gained increased attention within the last decade, primarily due to their high reactivity, cost-effectiveness and potential to treat a broad range of contaminants (e.g., chlorinated organic solvents, inorganic anions, or metals). OBJECTIVE: In this paper, the state of the art of applicability of nanomaterials, especially the most frequently used nZVI in soil and groundwater, is presented. The purpose of this article is to give an overview of the current knowledge pertaining to the synthesis, employment, limitations, and risk of iron nanoparticles. METHODS: Therefore, the authors have reviewed and discussed the recent patents and papers related to the developments and approaches made on the synthesis of iron nanoparticles, emphasizing the justification of green synthesis methods. The studies related to the effective use of nanoparticles in remediating organic and inorganic contaminants are addressed. The potential limitations, challenges, and risks of this innovative nanoremediation technology are also discussed. RESULTS: Studies suggest that nZVI have successfully been applied in nanoremediation; however, little is known about the particles' fate and impacts. Additionally, it has already been proven that synthesis and modification can largely determine the physicochemical and biological properties of the particles. CONCLUSION: This review corroborates the suitability of nanoparticles in the remediation of contaminated media, simultaneously highlighting the work still needed to optimize the syntheses and careful use of such materials, concluding that comprehensive screenings should be performed prior to nZVI applications to assess their behavior and impact on the environment and living systems.

Zero-Valent Iron Nanoparticles for Soil and Groundwater Remediation.

Zero-valent iron has been reported as a successful remediation agent for environmental issues, being extensively used in soil and groundwater remediation. The use of zero-valent nanoparticles have been arisen as a highly effective method due to the high specific surface area of zero-valent nanoparticles. Then, the development of nanosized materials in general, and the improvement of the properties of the nano-iron in particular, has facilitated their application in remediation technologies. As the result, highly efficient and versatile nanomaterials have been obtained. Among the possible nanoparticle systems, the reactivity and availability of zero-valent iron nanoparticles (NZVI) have achieved very interesting and promising results make them particularly attractive for the remediation of subsurface contaminants. In fact, a large number of laboratory and pilot studies have reported the high effectiveness of these NZVI-based technologies for the remediation of groundwater and contaminated soils. Although the results are often based on a limited contaminant target, there is a large gap between the amount of contaminants tested with NZVI at the laboratory level and those remediated at the pilot and field level. In this review, the main zero-valent iron nanoparticles and their remediation capacity are summarized, in addition to the pilot and land scale studies reported until date for each kind of nanomaterials.

Heterogeneous electro-Fenton using three-dimension NZVI-BC electrodes for degradation of neonicotinoid wastewater.

Neonicotinoids (NEOs), as the most widely used pesticides, pose a serious threat to water ecosystems, especially clothianidin (CLO). However, the degradation behavior of CLO, as a new type of persistent organic pollutant, is rarely studied in wastewater treatment. To bridge this gap, heterogeneous electro-Fenton system using three-dimension electrodes made of biochar-supported zero-valent iron nanoparticle hybrid material (NZVI-BC), abbreviated as 3D-ICE-EF system, is invented and initially applied in CLO wastewater degradation, without the addition of Fenton reagent. NZVI-BC in 3D-ICE-EF system can concentrate CLO on electrodes by excellent adsorption and effectively eliminate it to achieve self-cleaning effect. In addition, the deposition of iron mud (Fe(OH)3) and the circular utilization of Fe in Fenton system is effectively improved by the addition of hydroquinone (HQ) in 3D-ICE-EF system. The pH applicable scope of Fenton system is extended to alkaline condition by the applications of NZVI-BC electrodes. The increase in the acidity of electrolyte is considered the primary reason of the high degradation efficiency of CLO in 3D-ICE-EF system at an initial pH of 9.0. The degradation performance of 3D-ICE-EF system tends to be promoted by the increase of current intensity and air flow rate. Seven plausible mechanisms of CLO degradation were identified in 3D-ICE-EF system. The ecotoxicity evaluation of degradation products indicated that CLO degradation in 3D-ICE-EF system exhibits a remarkable tendency to reduce toxicity levels.