The acetabular labrum tissue shows unique transcriptome signatures compared to cartilage and responds to combined cyclic compression and surface shearing.

The labrum is a fibrocartilaginous ring surrounding the acetabulum. Loss of labrum function contributes to the degeneration of the hip joint, leading to osteoarthritis. Successful labrum restoration requires profound knowledge about the tissue being replaced. The aim of this study was to characterize the transcriptome and the mechanobiological function of the labrum. RNA-seq was performed to compare the transcriptome of bovine labrum against articular cartilage tissue. Differential expression and gene ontology (GO) term pathway analysis were applied using the SUSHI framework. Bovine labrum explants were cultured for 5 days with / without mechanical loading and targeted gene expression was analyzed by real time quantitative polymerase chain reaction. More than 6'000 genes were significantly differentially expressed in the labrum compared to cartilage. Up- and downregulated genes were associated with the GO term extracellular matrix organization. The study established an extracellular matrix gene expression profile of healthy labrum tissue and identified significantly upregulated extracellular matrix related genes compared to cartilage tissue. Mechanical loading significantly upregulated aggrecan (ACAN), cartilage oligomeric matrix protein (COMP), fibronectin (FN1) and proteoglycan 4 (PRG4). MMP1/3/9 and IL6, which were upregulated by an inflammatory stimulus (IL-1b), were statistically unaffected by the loading, although IL6 was upregulated in each donor immediately after the loading. Unique ECM related features may guide the development of labrum tissue-engineering solutions. Despite the transcriptome differences between labrum and cartilage tissue, gene expression response to mechanical loading showed similarities with previously reported responses in cartilage, indicating a preserved tissue adaptation mechanism to mechanical loading. Running title: Acetabular Labrum Mechanobiology.

The role of hairs in the adhesion of octopus suckers: a hierarchical peeling approach.

Organisms like the octopus or the clingfish are a precious source of inspiration for the design of innovative adhesive systems based on suction cups, but a complete mechanical description of their attachment process is still lacking. In this paper, we exploit the recent discovery of the presence of hairs in the acetabulum roof of octopus suction cups to revise the current model for its adhesion to the acetabulum wall. We show how this additional feature, which can be considered an example of a hierarchical structure, can lead to an increase of adhesive strength, based on the analysis of the cases of a simple tape and an axisymmetrical membrane adhering to a substrate. Using peeling theory, we discuss in both cases the influence of hierarchical structure and the resulting variation of geometry on the adhesive energy, highlighting how an increase in number of hierarchical levels contributes to its increment, with a corresponding improvement in functionality for the octopus suckers.

Evidence of structural cavities in 3D printed acetabular cups for total hip arthroplasty.

The use of three-dimensional (3D) printing to manufacture off-the-shelf titanium acetabular cups for hip arthroplasty has increased; however, the impact of this manufacturing technology is yet not fully understood. Although several studies have described the presence of structural cavities in 3D printed parts, there has been no analysis of full postproduction acetabular components. The aim of this study was to investigate the effect of 3D printing on the material structure of acetabular implants, first comparing different designs of 3D printed cups, second comparing 3D printed with conventionally manufactured cups. Two of the 3D printed cups were produced using electron beam melting (EBM), one using laser rapid manufacturing (LRM). The investigation was performed using X-ray microcomputed tomography, imaging both the entire cups and samples sectioned from different regions of each cup. All 3D printed cups showed evidence of structural cavities; these were uniformly distributed in the volume of the samples and exhibited a prevalent spherical shape. The LRM-manufactured cup had significantly higher cavity density (p = .0286), with a median of 21 cavities/mm3 compared to 3.5 cavities/mm3 for EBM cups. However, the cavity size was similar, with a median of 20 µm (p = .7385). The conventional cups showed a complete absence of distinguishable cavities. The presence of cavities is a known limitation of the 3D printing technology; however, it is noteworthy that we found them in orthopedic implants used in patients. Although this may impact their mechanical properties, to date, 3D printed cups have not been reported to encounter such failures.

Posterior acetabular uptake on 18F-fluoride positron emission tomography/computed tomography reveals a putative contrecoup region in patients with femoroacetabular impingement.

BACKGROUND AND PURPOSE: The pathology of the posterior acetabular lesions, so-called "contrecoup regions", in femorocacetabular impingement (FAI) has not been elucidated fully. 18F-fluoride positron emission tomography/computed tomography (PET/CT) can visualize abnormal uptake caused by impingement. Therefore, we aimed to evaluate posterior acetabular uptake on PET/CT in FAI patients. PATIENTS AND METHODS: Patients with FAI who underwent 18F-fluoride PET/CT between October 2014 and October 2016 were retrospectively evaluated. The maximum standardized uptake value (SUVmax) in the posterior acetabulum was evaluated. The mean SUVmax of FAI with cam morphology (the cam group) was compared with that of FAI with pincer morphology (the pincer group). In addition, the numbers of cases with SUVmax ≥ 6 and SUVmax < 6 in each group were evaluated. The entire study cohort was also grouped according to SUVmax, and the mean α and center edge angles were evaluated. RESULTS: In total, 41 hips were analyzed (34 hips in the cam group and 7 in the pincer group). The mean SUVmax of the cam group (11.2 ± 7.4) was significantly higher than that of the pincer group (4.9 ± 1.9) (p < 0.01). The incidence of cases with SUVmax ≥ 6 in the cam group was significantly high (p < 0.01). In the overall cohort, the mean α angle of the SUVmax ≥ 6 group was significantly higher than that of the SUVmax < 6 group (p < 0.01). CONCLUSION: Evaluation of posterior acetabular uptake suggests an association between cam morphology and increased posterior acetabular uptake.

Backside wear, particle migration and effectiveness of screw hole plugs in acetabular hip joint replacement with cross-linked polyethylene.

In total hip arthroplasty, osteolysis of the acetabulum often occurs at the backside of cups in the area of screw holes, indicating a clinically relevant amount of polyethylene (PE) wear particles in this area. In order to avoid a possible migration of wear particles to the acetabulum-bone, screw hole plugs are provided for some implant systems. The aims of this study were to quantitatively determine backside wear and to investigate the migration behaviour of articulation-related wear particles in a cup system with open and closed screw holes by plugs. Titanium cup systems with backside holes for screw fixations were sinusoidally loaded with 2.7 kN. The articulation area was separated from the backside area of the cup. A defined amount of articulation-generated particles was added to the fluid of the articulation chamber. The fluids in the two chambers were separately filtered after 2 × 106 cycles for a particle analysis. Backside wear with noticeably small (65.6 ±â€¯4.2 nm) and round PE particles was identified. With both open and closed screw holes, a migration of the articulating wear particles from the articulation area behind the cup could be observed. Backside wear was estimated to be below 1% of the articulated wear. Screw hole plugs did not effectively prevent the migration of PE wear particles behind the investigated cups. STATEMENT OF SIGNIFICANCE: Backside wear occurs in a proven cup-system. Furthermore, it was quantitatively observed that articulation-generated wear products could migrate from the articulating area along the cup/liner-interface through the screw holes behind the cup. An almost unimpeded particle migration to the acetabulum-bone, in conjunction with very small backside wear particles, could produce a clinically relevant amount of PE with respect to pelvic lysis. These findings highlight the importance of management to avoid particle migration in artificial hip cups. Therefore, primarily the use of screw hole plugs, as far as available for the respective cup-system, is recommended. The aim of avoiding particle migration by plugs, but also by using a sophisticated anchoring mechanism between cup and PE liner should continue in future.

Effects of Endoprosthesis Head Material on Acetabular Cartilage Metabolism: An Animal Study Using Crossbred Pigs.

BACKGROUND: Hip endoprosthesis is one option for the treatment of displaced femoral neck fractures and avascular necrosis of the femoral head. Few reports are available describing acetabular cartilage metabolism after endoprosthesis surgery of the hip. The purpose of this study was to compare the biological effects on cartilage between cobalt-chrome (Co-Cr) and alumina ceramic heads wherein the cartilage articulates directly. METHODS: We used the acetabular cartilage from six hips of three immature crossbred pigs to examine the effects on cytokines, the amount of hyaluronic acid (HA), and cartilage mRNA expression of ceramic head and Co-Cr head endoprosthesis. Mechanical loading of materials of Co-Cr and ceramic heads was performed on the acetabular cartilage in culture media as an organ culture model. Thereafter, protein levels of cytokines (MMP-1, 3, TNF-alpha (α), Interleukin (IL)-1 alpha (α), and IL-1 beta (ß)) and the amount of HA were measured from the culture media. Cartilage RNA extraction was performed, and quantitative reverse transcriptase-polymerase chain reaction was performed with primer sets for type I, II, and III collagens; aggrecan; MMP-1, 3, 13; TNF-α; and IL-1 α, IL-1 ß. RESULTS: Protein level of IL-1 ß and amount of HA in the Co-Cr group were significantly higher than those of the Ceramic group. Type II collagen mRNA expression in the Ceramic group was significantly higher than in the Co-Cr group. IL-1 ß mRNA expression was significantly higher in the Co-Cr group than in the Ceramic group. CONCLUSIONS: The present study showed that ceramic bipolar produces smaller adverse effects on cartilage cells compared to Co-Cr bipolar. These results could have significant implications for implant usage not only in hip joints, but also in other joints, including the shoulder, talus and radial head.

Metal ion trend in patients with metal-on-metal total hip arthroplasty: a 10-year prospective study.

INTRODUCTION:: There have been reported adverse reactions in patients with large head metal-on-metal hip arthroplasty, therefore metal particle debris are a cause for concern. The aim of this study was to evaluate the release trend of metal ions and the correlated variables. METHODS:: 54 patients were prospectively enrolled into the study from 2004 to 2006. All patients had 36-mm metal head, Pinnacle acetabular component, Summit stem and Ultamet CoCr alloy liner (Depuy Inc.), and underwent clinical and radiological management. The haematic concentration of Cr-Co at 0, 6, 12, 24, 60 and 120 months after the implantation was analysed in a sub-cohort of 34 patients. RESULTS:: 10-year revision rate for each case was 8.9%. The average concentration of Co at 120 months was 3.12 µg/L (median 2.20) with 53% values >2 µg/L and 1 >7 µg/L. After 6 months the median levels of Cr and Co were higher than time 0 ( p < 0.0001); no significant differences were found between 6 and 24 months; while Co had significant increase between 60 and 120 months ( p = 0.002). Overweight, University of California at Los Angeles (UCLA) >9 and <50 years old patients have significantly higher circulating metal ions. DISCUSSION:: This is 1 of the few prospective studies on the argument. The revision rate is conforming to records. Our data shows ionic concentration is not predictive of revision or adverse reaction to metals. We described a 3-phase trend for Co probably due to the loss of integrity of the surfaces.

Bone penetration of intravenous flucloxacillin and gentamicin as antibiotic prophylaxis during total hip and knee arthroplasty.

AIMS: To investigate the bone penetration of intravenous antibiotic prophylaxis with flucloxacillin and gentamicin during hip and knee arthroplasty, and their efficacy against Staphylococcus (S.) aureus and S. epidermidis. PATIENTS AND METHODS: Bone samples from the femoral head, neck and acetabulum were collected from 18 patients undergoing total hip arthroplasty (THA) and from the femur and tibia in 21 patients during total knee arthroplasty (TKA). The concentration of both antibiotics in the samples was analysed using high performance liquid chromatography. Penetration was expressed as a percentage of venous blood concentration. The efficacy against common infecting organisms was measured against both the minimum inhibitory concentration 50, and the more stringent epidemiological cutoff value for resistance (ECOFF). RESULTS: The bone penetration of gentamicin was higher than flucloxacillin. Relative to ECOFF, flucloxacillin concentrations were effective against S. aureus and S. epidermidis in all THAs and 20 (95%) TKAs. Gentamicin concentrations were effective against S. epidermidis in all bone samples. Gentamicin was effective against S. aureus in 11 (61.1%) femoral neck samples in THA. Effective concentrations of gentamicin against S. aureus were only achieved in four (19%) femoral and six (29%) tibial samples in TKA. CONCLUSION: Flucloxacillin and gentamicin were found to penetrate bone during THA and TKA. Gentamicin was effective against S. epidermidis in both THA and TKA, while levels were subtherapeutic against S. aureus in most TKAs. Bone penetration of both antibiotics was less in TKA than THA, and may relate to the use of a tourniquet. Using this antibiotic combination, effective cover against the two common infective organisms was achieved in all THAs and all but one TKA. Cite this article: Bone Joint J 2017;99-B:358-64.

[APPLICATION AND EFFECTIVENESS OF BIOLOGICAL TYPE ACETABULAR CUP IN ADULT Crowe TYPE IV DEVELOPMENTAL DYSPLASIA OF THE HIP].

OBJECTIVE: To investigate the application and effectiveness of the biological type acetabular cup(diameter < 44 mm) in adult Crowe type IV developmental dysplasia of the hip (DDH). METHODS: Between April 2001 andAugust 2013, biological type acetabular cup was used in total hip arthroplasty for the treatment of Crowe type IV DDH in16 cases (20 hips). There were 3 males and 13 females, aged 31-69 years (mean, 49 years). Unilateral hip was involved in 12cases, and bilateral hips in 4 cases. The patients showed pain of the hip joint and inequality of lower limb (shortening ofaffected limb 1.8-6.0 cm in length, 3.5 cm on average). Acetabular deformity, the relationship and the severity of femoralhead dislocation were comfirmed on the X-ray films. The preoperative Harris score was 34.0 ± 6.9. RESULTS: All patientsachieved healing of incision by first intention, with no complication of infection or neurovascular injury. Sixteen caseswere followed up 4-12 years (mean, 7.5 years). At 2 weeks after operation, dislocation occurred in 2 cases, and were fixedwith plaster for 3 weeks after reduction of the hip. Postoperative X-ray films showed complete reduction of femoral head;the average acetabular coverage of the cup of the weight-bearing area was 98.5% (range, 98.2%-99.1%). The cup from theRanawat triangle was 4.6-7.0 mm (mean, 5.8 mm) in medial shifting, and was 4.5-7.9 mm (mean, 6.2 mm) in elevation,it located at cup lateral surface area inside the iliopectineal line and the Kohler line (< 40%); the cup abduction angle was(45 ± 5)degrees, and the anteversion angle was (10 ± 5)degrees. The other patients had no prosthesis loosening except 1 patient havingextensive acetabular prosthesis loosening because of acetabular osteolysis at 12 years after operation. The hip Harris scorewas significantly improved to 85.0 ± 7.5 at 1 year after operation (t = 14.34, P = 0.01). CONCLUSION: The acetabular grindingprocess to retain enough bone combined with a small cup of-biological prosthesis treating adult Crowe type IV DDH has theadvantages of satisfactory coverage and initial acetabular fixation, so good early and mid-term effectiveness can be obtained.

Distinct dysregulation of the small leucine-rich repeat protein family in osteoarthritic acetabular labrum compared to articular cartilage.

OBJECTIVE: Articular cartilage is well studied in osteoarthritis (OA). However, the role of supporting structures, such as the acetabular labrum, a sealing structure surrounding the hip joint, has been investigated much less. We recently showed that fibrochondrocytic labrum cells are metabolically active. This study was undertaken to investigate hip OA­associated changes in human acetabular labrum cells. METHODS: Microarray analysis was performed to compare OA labrum cells to healthy labrum cells cultured in a 3-dimensional alginate bead system. Data were analyzed by cluster analysis using gene set enrichment analysis software and by gene list analysis using PANTHER gene family tools. Selected candidates were validated by quantitative polymerase chain reaction analysis on labrum and cartilage samples and by immunohistochemistry. The functional impacts of the genes identified were investigated by in vitro stimulation experiments in labrum cells. RESULTS: Pathway analysis revealed increased cytokine and chemokine signaling in OA labrum cells, whereas reduced extracellular matrix interactions and transforming growth factor ß signaling were observed. Several genes were significantly differentially expressed in OA compared to healthy labrum. We specifically focused on 3 small leucine-rich repeat proteins (SLRPs), osteomodulin, osteoglycin, and asporin, that appeared to be distinctly regulated in OA labrum compared to OA cartilage. SLRPs were strongly down-regulated in OA labrum but up-regulated in OA articular chondrocytes. Moreover, in vitro stimulation with osteomodulin increased aggrecan expression in OA labrum cells. CONCLUSION: OA labrum fibrochondrocytes have several features similar to OA chondrocytes. However, SLRP expression seems to be differentially influenced by degeneration in OA labrum compared to cartilage, suggesting a specific role for this supporting structure in OA. The functional impact of SLRPs on labrum cells makes them interesting targets for further studies in hip OA.

Periacetabular bone metabolism following hip revision surgery. PET-based evaluation of allograft osteointegration.

UNLABELLED: The treatment of loosened total hip replacement (THR) acetabular components may require the management of severe bone defects. Although being applied for decades, there is only limited scientific data about the osteointegration of cancellous bone allografts (CBA) and other void fillers. Monitoring of periprosthetic bone regeneration could possibly help to optimize this process thereby reducing late failure rates. The aim of this study was to show osteometabolic changes in periprosthetic CBA after THR revision with the use of sodium-[18F]-fluoride (NaF) and positron emission tomography (PET). PATIENTS, METHODS: Twelve patients undergoing THR revision with the use of CBA were prospectively enrolled in the study. Nine patients completed all necessary examinations and were included in the evaluation. The temporal pattern of osteointegration was assessed via NaF-PET at one (PET1) and six weeks (PET2) after surgery. CBA, tantalum implants, supraacetabular regions ipsilateral and contralateral, and parasymphyseal pubic bones were delineated as volumes of interest (VOI) in postop CT scans, which were then merged with the PET data. RESULTS: In comparison to the contralateral supraacetabular reference bone, a significant 1.5-fold increase of osteometabolic activity from PET1 to PET2 was seen in the CBA region. Also, the ipsilateral supraacetabular host bone showed a higher NaF-influx in week 6, compared to the first postoperative week. The supraacetabular site exhibited a significantly 1.8- to 2-fold higher influx and uptake than bone regions in non-operated sites. Tantalum implants had a low NaF influx at both time points investigated. CONCLUSION: Using NaF-PET osteometabolic changes of CBA and implant-bone-interfaces can be monitored. Applying this method we demonstrated early periprosthetic temporal bone regeneration patterns in THR cup revision patients.

Bone remodelling in the natural acetabulum is influenced by muscle force-induced bone stress.

A modelling framework using the international Physiome Project is presented for evaluating the role of muscles on acetabular stress patterns in the natural hip. The novel developments include the following: (i) an efficient method for model generation with validation; (ii) the inclusion of electromyography-estimated muscle forces from gait; and (iii) the role that muscles play in the hip stress pattern. The 3D finite element hip model includes anatomically based muscle area attachments, material properties derived from Hounsfield units and validation against an Instron compression test. The primary outcome from this study is that hip loading applied as anatomically accurate muscle forces redistributes the stress pattern and reduces peak stress throughout the pelvis and within the acetabulum compared with applying the same net hip force without muscles through the femur. Muscle forces also increased stress where large muscles have small insertion sites. This has implications for the hip where bone stress and strain are key excitation variables used to initiate bone remodelling based on the strain-based bone remodelling theory. Inclusion of muscle forces reduces the predicted sites and degree of remodelling. The secondary outcome is that the key muscles that influenced remodelling in the acetabulum were the rectus femoris, adductor magnus and iliacus.

Long-term outcome of gradual reduction using overhead traction for developmental dysplasia of the hip over 6 months of age.

BACKGROUND: In children over 6 months of age with developmental dysplasia of the hip (DDH), achieving a concentrically reduced hip while avoiding avascular necrosis (AVN) is challenging. The utility of gradual reduction (GR) using traction has insufficient evidence. We therefore report the long-term outcome of GR using overhead traction (OHT). METHODS: We retrospectively reviewed 67 patients with DDH (75 hips) treated with GR using OHT over 6 months of age. The age at reduction ranged from 7 months to 4 years. All patients were followed up until skeletal maturity with a mean duration of 15.6 years. Pelvic radiographs were used to assess AVN, acetabular development, and the Severin classification. We determined the factors affecting the outcome at skeletal maturity. RESULTS: Seventy-two hips (96%) were successfully reduced, 2 required subsequent closed reduction and 1 underwent open reduction. AVN occurred in 2 hips (2.7%). Among 48 hips (64%) with residual acetabular dysplasia, 31 were treated with Salter innominate osteotomy (SIO) between 5 and 6 years of age. Finally, 62 hips (82.7%) showed satisfactory outcome (56 in Severin class I and 6 in class II), whereas 13 showed unsatisfactory outcome (class III). Although we found no significant factors affecting the outcome, most of the hips treated with SIO were included in the satisfactory group. CONCLUSIONS: GR using OHT could effectively minimize the risk of developing AVN in patients with DDH over 6 months of age at presentation. SIO at preschool age may play a beneficial role in the long-term outcome of GR using OHT.

[Expressions of bone morphogenetic protein 2 and runt-related transcription factor 2 and microarchitecture of trabecular bone periacetabula in adult patients with developmental dysplasia of hip].

OBJECTIVE: To explore the expressions of bone morphogenetic protein 2 (BMP-2) and runt-related transcription facotr 2 (Runx2) and microarchitecture of trabecular bone periacetabula in adult patients with developmental dysplasia of the hip (DDH). METHODS: Between March and September 2008, the trabecular bone periacetabulum was collected from 8 patients with DDH who were scheduled for total hip arthroplasty (aged 37-55 years, 3 males and 5 females, trial group) and from 8 patients with avascular necrosis of the femoral head (Ficat stage II) who were scheduled for hip resurfacing arthroplasty (aged 36-55 years, 3 males and 5 females, control group). The expressions of BMP-2 and Runx2 in the trabecular bone were determined by real-time quantitative PCR, and the microarchitecture was observed by micro-CT and the following parameters were determined: bone volume/total volume (BV/TV), connectivity density (Conn.Dens), trabecular number (Tb.N), trabecular thickness (Tb.Th), trabecular separation (Tb.Sp), and structure model index (SMI). RESULTS: The expressions of BMP-2 and Runx2 were significantly lower in trial group than in control group (P < 0.05). The micro-CT showed sparse trabecular bone in trial group and dense trabecular bone in control group. BV/TV and Tb.N in trial group were significantly lower than those in control group, and SMI and Tb.Sp in trial group were significantly higher than those in control group (P < 0.05); there was no significant difference in Conn.Dens and Tb.Th between 2 groups (P > 0.05). CONCLUSION: The trabecular bone is in a low metabolism condition and its microarchitecture is tendency to be osteoporosis trabecualr bone in adult patients with DDH. It may be related with the acetabular component loosening after total hip arthroplasty.

Comparing alumina-reduced and conventional surface grit-blasted acetabular cups in primary THA: early results from a randomised clinical trial.

Alumina grit-blasted implants have been widely used in cementless total hip arthroplasty (THA). However, alumina particles can become embedded in the implant surface, leading to deposition in periprosthetic tissues and implant wear. We hypothesised that the alumina-reduced surface BICON-PLUS NT acetabular cup would improve implant fixation and clinical outcomes over the conventional surface BICON-PLUS cup. In a randomised controlled, double-blind study, patients with primary or secondary osteoarthritis requiring primary arthroplasty were randomly assigned to THA with either the BICON-PLUS or BICON-PLUS NT cup. All cups were combined with the SL-PLUS stem. In addition to clinical and radiographic assessments, dual-energy X-absorptiometry (DEXA) was performed preoperatively and at regular intervals during a planned 2-year follow-up period to measure bone mineral density as a marker of implant fixation. At 1 year, there were no differences in bone mineral density, or in clinical or radiographic outcomes between the BICON-PLUS and BICON-PLUS NT groups were identified, leading to early termination of the study. Both groups showed excellent clinical improvement and there were few complications. Both the alumina-reduced and conventional surface acetabular cups can be used with confidence in primary THA for osteoarthritis, although longer-term studies are required to confirm these findings.

First insights into human acetabular labrum cell metabolism.

OBJECTIVE: Hip labrum pathology has only begun to emerge as a significant source of groin pain in the last decade since the development of hip arthroscopy. Few data are available on the anatomy, histology and function of this structure. Moreover, no metabolic data exist at cellular level. The aim of this study was to characterize extracellular matrix (ECM) genes and pro-inflammatory mediators expressed by these cells. METHODS: Isolated human acetabular labrum cells were cultured in alginate beads for 10 days and additionally stimulated with interleukin (IL)-1 for 24 h. Gene expression levels and secretion of different ECM genes, enzymes and cytokines were examined by quantitative polymerase chain reaction (qPCR) and enzyme-linked immunosorbent assay (ELISA) to assess the metabolic characteristics of labrum cells. Articular chondrocytes and meniscus cells served as controls. RESULTS: Labrum cells expressed high levels of COL1A1 and low levels of COL2A1, aggrecan and SOX-9 compared to chondrocytes. However, COL2A1 was more expressed by labrum cells than by meniscus cells. The expression of matrix metalloproteinase (MMP)-1/-2/-9, ADAMTS-4 and IL-6 was significantly higher in labrum cells than in chondrocytes. IL-1 suppressed the ECM gene expression levels of labrum cells, but increased the expression levels and release of MMP-1/-3/-9/-13 and ADAMTS-4 and IL-6 by these cells. Remarkably, MMP-9 was only significantly upregulated in acetabular labrum cells. CONCLUSIONS: The findings in this study demonstrated that the acetabular labrum is populated with unique highly active fibrochondrocyte-like cells. These cells are capable of expressing and releasing pro-inflammatory enzymes and cytokines and react to a pro-inflammatory stimulus. In this way, they contribute obviously to disturbed tissue function in hip labrum pathology.

Predictors for secondary procedures in walking DDH.

BACKGROUND: Persistent or recurrent hip dysplasia and/or loss of reduction can complicate the treatment of developmental dysplasia of the hip (DDH) in walking children. In this study, we identify predictors for secondary procedures after open reduction of the hip in walking children with DDH. METHODS: We performed a retrospective study of walking children with idiopathic DDH treated with open reduction of the hip and followed up for >5 years. Perioperative factors were analyzed to investigate predictors of reoperation. Factors associated with the need for secondary procedures were identified. Acetabular remodeling was analyzed with a graphical plot of serial (0, 6 and 12 mo, and yearly) mean acetabular index and SD. RESULTS: There were 49 open reductions of the hip in 42 patients (34 female, 8 male) at a mean age of 31.3 months (range, 15.3 to 92.6 mo), with a mean follow-up of 9.7 years (5 to 16.9 y). Twelve (24%) patients had open reduction only, 15 (31%) had concurrent pelvic osteotomy, 4 (8%) had femoral osteotomy, and 18 (37%) had both femoral and pelvic osteotomy. Four (8%) patients required repeat open reduction at a mean of 5.1 months (range, 4 to 7.5 mo) after index surgery. Twenty-four (49%) patients had at least 1 secondary surgery for dysplasia at a mean of 3.2 years after index surgery. Six of the 24 (25%) had 2 and 2/24 (8.3%) had 3 additional operations. Of the 27 patients who did not have concurrent femoral osteotomy at index surgery, 19/27 (73%) required a secondary procedure; this significantly predicted the need for reoperation (P<0.001). Only 5/22 patients with femoral osteotomy at index surgery required a secondary procedure. Maximum acetabular remodeling was observed in the first 4 years after primary reduction, and the mean acetabular index remodeled from 43.9 to 20.3 degrees during this period. CONCLUSIONS: Forty-nine percent of the patients in this cohort required secondary procedures to treat hip dysplasia. Open reduction without concurrent femoral osteotomy strongly predicted the need for a secondary procedure. Maximum acetabular remodeling was observed in the first 4 years after open reduction. LEVEL OF EVIDENCE: Retrospective case series, level IV.

Supra acetabular bone mineral density measurements after hip resurfacing arthroplasty at short term follow up.

Implantation of a cementless press-fit acetabular cup during hip arthroplasty alters stress transfer to the periacetabular bone, resulting in stress shielding of cancellous bone and enhanced load transfer to cortical bone. Theoretically, the thicker, stiffer and larger acetabular cup of a hip resurfacing may increase periacetabular bone stress shielding. We attempted to assess the matter (at a minimum of 2 years after surgery) by measuring any difference in supra acetabular bone mineral density (BMD) between the side implanted with a thick monoblock cobalt-chromium (Co-Cr) acetabular component during hip resurfacing (HR) and the opposite non-operated side. We retrospectively recruited 44 patients who had undergone metal-on-metal hybrid hip resurfacing for unilateral osteoarthritis of the hip joint . BMD of the supra acetabular bone of both hips was measured using a dual energy X-ray absorptiometry (DEXA) scan. The BMD measured in Zone 2 was not different on the operated side (1.69 g/cm2 ± 0.48) compared with the non-operated side (1.70 g/cm2 ±0.49) (p=0.904). Contrary to our expectations, implantation of a monoblock Co-Cr acetabular component during HR did not cause significant stress-shielding of supra acetabular cancellous bone.

Diagnosis and treatment of femoroacetabular impingement in Legg-Calvé-Perthes disease.

Residual hip deformities secondary to Legg-Calvé-Perthes disease (LCPD) include growth disturbance of the proximal femoral physis with nonspherical femoral head, overriding greater trochanter with short femoral neck and secondary remodeling of the acetabulum. These deformities can change the mechanical function of the hip joint and contribute to femoroacetabular impingement. All these deformities need to be recognized and its contribution to the patient's symptoms understood before a treatment strategy can be planned. Safe surgical dislocation of the hip allows for complete inspection of the hip joint and dynamic assessment of femoroacetabular contact during hip motion. The goals of this paper are to review the pathophysiology, clinical presentation, imaging findings, and the management of femoroacetabular impingement in patients with LCPD. We sought to present our treatment philosophy for patients who were diagnosed and treated for LCPD as a child and present with femoroacetabular impingement as adolescents and young adults.

Effect of acetabular component anteversion on dislocation mechanisms in total hip arthroplasty.

Quantifying soft-tissue tension around the hip joint during total hip arthroplasty remains difficult. In this study, a three-dimensional computer-aided design model was developed to clarify how component position in total hip arthroplasty contributes to the primary cause of posterior dislocation in cases of flexion, adduction and internal rotation. To better understand the influences of anteversion angle of the acetabular component, its effects on the primary causes of dislocations and the range of motion were investigated. Three different primary dislocation mechanisms were noted: impingement of the prosthetic femoral neck on the cup liner; impingement of the osseous femur on the osseous pelvis; and spontaneous dislocation caused by soft-tissue traction without impingement. Spontaneous dislocation could be detected by calculating hip forces at any thigh position using the computer-aided design model developed. In computer analysis, a transition from prosthetic impingement rate to osseous impingement rate occurred with increasing anteversion angle of the acetabular component. Spontaneous dislocation was detected at angles > 10° of anteversion of the acetabular component when flexion occurred with extreme adduction and internal rotation. This study demonstrated the possibility of spontaneous dislocation that results not from prosthetic or bony impingement but from muscle traction with increased range of motion.