CNTs-CaP/chitosan-coated AZ91D magnesium alloy extract promoted rat dorsal root ganglia neuron growth via activating ERK signalling pathway.

Increasing attention has been paid on the application of biodegradable materials such as magnesium and its alloys in neuron repair. AZ91D magnesium alloy coated with carbon nanotubes (CNTs) and/or calcium phosphate (CaP)/chitosan (CS) was fabricated in this study. To evaluate the bioactivity of these AZ91D-based composites, the extracts were prepared by immersing samples in modified simulated body fluid (m-SBF) for 0, 2, 8, 16, 24, 34, 44, 60, or 90 days. Immunofluorescence staining for neuronal class III ß-tubulin (TUJ1) revealed that both CNTs-CaP/CS-AZ91D and CaP/CS-AZ91D extracts promoted axon outgrowth of dorsal root ganglia (DRG) neurons, accompanied with increased expression of phosphorylated focal adhesion kinase (p-FAK) and growth associated protein-43 (GAP-43). Besides, the extracts increased the expression and the release of neurotrophic factors including nerve growth factor (NGF) and brain-derived neurotrophic factor (BDNF). ERK signalling was activated in DRG neurons after treating with either CNTs-CaP/CS-AZ91D or CaP/CS-AZ91D extracts, and its inhibition with U0126 counteracted the beneficial effects of these extracts on DRG neuron. Overall, the extracts from these AZ91D-based composites might promote DRG neuron growth via activating ERK signalling pathway. Notably, CNTs-CaP/CS-AZ91D extracts showed a better promoting effect on neuron growth than CaP/CS-AZ91D. Assessment of ion elements showed that the addition of CNTs coating enhanced magnesium corrosion resistance and reduced the deposition of calcium and phosphorus on the surface of CaP/CS-AZ91D alloy. These findings demonstrate that CNTs-CaP/CS-AZ91D likely provide a more suitable environment for neuron growth, which suggests a potential implantable biomaterial for the treatment of nerve injury. SIGNIFICANCE: AZ91D magnesium alloy coated with carbon nanotubes (CNTs) and/or calcium phosphate (CaP)/chitosan (CS) was fabricated and their immersion extracts were prepared using modified simulated body fluid in this study. Both extracts from CNTs-CaP/CS and CaP/CS-coated AZ91D magnesium alloy promotes rat dorsal root ganglia (DRG) neuron growth via activating ERK signalling pathway. Notably, the addition of CNTs improves the performance of CaP/CS-AZ91D. For the first time, our research demonstrates that CNTs-CaP/CS-AZ91D likely provide a suitable environment for neuron growth, suggesting these AZ91D-based composites as potential implantable biomaterials for the treatment of nerve injury.

Microscopic evaluation of the dentinal walls of extracted human teeth following electrochemical dissolution of fragmented nickel-titanium instruments.

Electrochemical dissolution is a method in which fluoridated solution in direct contact with the fractured instrument receives an electrical current that speeds up fragment dissolution. The aim of this study was to assess the integrity of dentinal walls during the electrochemical dissolution of fractured rotary endodontic instruments in extracted human teeth. Forty-five human mandibular incisors subjected to the electrochemical dissolution process using fluoride solution with low NaCl concentration (LC group: NaF 12 g/L + NaCl 1 g/L, pH = 5.0), fluoride solution with saturating NaCl concentration (SC group: NaF 12 g/L + NaCl 180 g/L, pH = 5.0) and distilled water (control group) were evaluated. For each group, 15 incisors were submitted for the scanning electron microscopy (SEM) evaluation. The roots were sectioned longitudinally; each hemisection was analyzed (n = 30), and energy-dispersive spectroscopy (EDS) was performed. The amount of dentinal tubule openings was analyzed by SEM. Statistical analyses were performed. The test solutions did not alter the amount of dentinal tubule openings when compared with the control group. No Ni or Ti was impregnated into the dentinal tubules after electrochemical techniques. The dentinal structure remained unchanged following the electrochemical dissolution method.

Recycling of aluminium scrap for secondary Al-Si alloys.

An increasing amount of recycled aluminium is going into the production of aluminium alloy used for automotive applications. In these applications, it is necessary to control and remove alloy impurities and inclusions. Cleaning and fluxing processes are widely used during processing of the alloys for removal of inclusions, hydrogen and excess of magnesium. These processes use salt fluxes based in the system NaCl-KCl, injection of chlorine or mixture of chlorine with an inert gas. The new systems include a graphite wand and a circulation device to force convection in the melt and permit the bubbling and dispersion of reactive and cleaning agents. This paper discusses the recycling of aluminium alloys in rotary and reverberatory industrial furnaces. It focuses on the removal of magnesium during the melting process. In rotary furnaces, the magnesium lost is mainly due to the oxidation process at high temperatures. The magnesium removal is carried out by the reaction between chlorine and magnesium, with its efficiency associated to kinetic factors such as concentration of magnesium, mixing, and temperature. These factors are also related to emissions generated during the demagging process. Improvements in the metallic yield can be reached in rotary furnaces if the process starts with a proper salt, with limits of addition, and avoiding long holding times. To improve throughput in reverberatories, start the charging with high magnesium content material and inject chlorine gas if the molten metal is at the right temperature. Removal of magnesium through modern technologies can be efficiently performed to prevent environmental problems.

Biogeochemical controls on the corrosion of depleted uranium alloy in subsurface soils.

Military activities have left a legacy of depleted uranium (DU) penetrator waste in the near-surface terrestrial environment. To understand the fate of this DU alloy, the mechanisms and controlling factors of corrosion need to be determined. In this study, field-moist and waterlogged microcosms were used to investigate the effect of redox conditions and soil water content on the corrosion and fate of DU in subsurface soil, and the impact of corroding DU on the soil microbial population. The mechanism of corrosion and the corrosion products formed were highly dependent on the water status of the soil. Under field-moist conditions, DU corroded at a rate of 0.49 +/- 0.06 g cm(-2) y(-1) and the main U input to surrounding soil was large metaschoepite [(UO2)8O2(OH)12 x (H2O)10] particles. However, underwaterlogged conditions the rate of corrosion was significantly slower at 0.01-0.02 g cm(-2) y(-1) and occurred with the release of dissolved species to the surrounding environment. Corrosion ceases under reducing conditions, thus redox conditions are important in determining the persistence of penetrators in the environment. Corroding DU alters the redox conditions in the surrounding environment and both mechanisms of corrosion impact the microbial community.

Magneto-vibratory separation of glass and bronze granular mixtures immersed in a paramagnetic liquid.

A fluid-immersed granular mixture may spontaneously separate when subjected to vertical vibration, separation occurring when the ratio of particle inertia to fluid drag is sufficiently different between the component species of the mixture. Here, we describe how fluid-driven separation is influenced by magneto-Archimedes buoyancy, the additional buoyancy force experienced by a body immersed in a paramagnetic fluid when a strong inhomogeneous magnetic field is applied. In our experiments glass and bronze mixtures immersed in paramagnetic aqueous solutions of MnCl2 have been subjected to sinusoidal vertical vibration. In the absence of a magnetic field the separation is similar to that observed when the interstitial fluid is water. However, at modest applied magnetic fields, magneto-Archimedes buoyancy may balance the inertia/fluid-drag separation mechanism, or it may dominate the separation process. We identify the vibratory and magnetic conditions for four granular configurations, each having distinctive granular convection. Abrupt transitions between these states occur at well-defined values of the magnetic and vibrational parameters. In order to gain insight into the dynamics of the separation process we use computer simulations based on solutions of the Navier-Stokes' equations. The simulations reproduce the experimental results revealing the important role of convection and gap formation in the stability of the different states.

Wet-chemical synthesis and properties of CoPt and CoPt3 alloy nanoparticles.

Surface-protected, air-stable nanoparticles of CoPt and CoPt3 were prepared by thermal decomposition/reduction of organometallic precursors with a long-chain aliphatic diol, also known as the polyol process. Particles 3 nm in diameter showed ferromagnetic behavior up to 350 K (Hc = 65 Oe at T = 300 K; Hc = 410 Oe at T = 5K) and underwent a disordering-ordering phase transformation after annealing that resulted in an increase in coercivity (Hc = 170 Oe at T = 300 K; Hc = 2000 Oe at T = 5 K).

On carbide dissolution in an as-cast ASTM F-75 alloy.

The solution treatment of an as-cast ASTM F-75 alloy was investigated. Microstructural evolution was followed during thermal processing, in particular with regard to the content and type of carbides formed. To evidence any probable carbide transformations occurring during the heating stage, as well as to clarify their effect on the carbide dissolution kinetics, three heating rates were studied. Image analysis and scanning electron microscopy techniques were used for microstructural characterization. For the identification of precipitates, these were electrolytically extracted from the matrix and then analyzed by X-ray diffraction. It was found that the precipitates in the as-cast alloy were constituted by both a M(23)C(6) carbide and a sigma intermetallic phase. The M(23)C(6) carbide was the only phase identified in solution-treated specimens, regardless of the heating rate employed, which indicated that this carbide dissolved directly into the matrix without being transformed first into an M(6)C carbide, as reported in the literature. It was found that the kinetics of dissolution for the M(23)C(6) carbide decreased progressively during the solution treatment, and that it was sensitive to the heating rate, decreasing whenever the latter was decreased. Because the M(23)C(6) carbide was not observed to suffer a phase transformation prior to its dissolution into the matrix, the effect of the heating rate was associated to the morphological change occurred as the specimens were heated. The occurrence of the observed phases was analyzed with the aid of phase diagrams computed for the system Co-Cr-Mo-C.

Metallic fragment deposits during phacoemulsification.

PURPOSE: To describe the nature and origin of foreign metallic intraocular bodies appearing after phacoemulsification. SETTING: Department of Ophthalmology, University Hospital of San Juan, Alicante, Spain. METHODS: Two metallic particles, 1 extracted during surgery and the other from a patient in whom surgery had been performed, were studied by scanning electronic microscopy and X-ray dispersive energy spectroscopy. Also evaluated were all metallic elements used in phacoemulsification including phaco tips, Sinskey hooks, and handpieces. A morphologic analysis at various magnifications was performed and the composition of the elements studied. RESULTS: Scanning electronic microscopy showed irregularities of the phaco tip and Sinskey hook after their use. Spectrographic analysis found that the phaco tip was mainly aluminum and titanium; the Sinskey hook, iron, chromium, cobalt, and nickel; the handpiece, iron, chromium, and nickel; and the 2 metallic particles, iron, chromium, and nickel, the same as the handpiece. CONCLUSION: The metallic particles extracted corresponded to those of the phaco handpiece. Vibration during prolonged use of the phacoemulsifier probably caused these particles to chip off the handpiece.