A clinical evaluation and tissue fiber burden analysis of a lifetime resident of Libby, Montana with adenocarcinoma of the lung.

INTRODUCTION: Vermiculite mining operations near Libby, Montana were active from the 1920s to 1990. Rail facilities for shipment of the mined material as well as some vermiculite processing activities were ongoing within the community of Libby. A fibrous component within the mined material has been associated with asbestos-related diseases in vermiculite miners and in the local citizens of the community. CLINICAL HISTORY/METHODS: We present a clinical case history and tissue fiber burden analysis of an individual with a multifocal adenocarcinoma of the lung who was a lifelong resident of Libby and whose history of exposure was as a member of the general population there. RESULTS/DISCUSSION: To our knowledge this is the first time tissue from a member of the general population of Libby, Montana has been evaluated and shown to contain an appreciable presence of "Libby amphibole" fibers.

Lung Cancer in an Orthoprosthetist Using Vermiculite.

Occupational exposure to certain substances would cause cancer. Herein, we report on a case of a 58-year-old former orthoprostethist who died from a lung adenocarcinoma. He had a 3 pack-year history of smoking and a single exposure to asbestos during his professional career. Between 1979 and 2010, he used vermiculite plaques daily to build medical prostheses, using no personal protective equipment. Contamination of vermiculite with amphibole asbestos has been described in Libby, Montana. Expert opinion on this case has raised the hypothesis of the use of this kind of vermiculite during this period and the occupational etiology of this cancer. It seems important to point out the possibility of vermiculite-related lung cancers in unusual occupations in order to better document such cases in the future.

Evaluation of Efficacy and Toxicity of Exfoliated Silicate Nanoclays as a Feed Additive for Fumonisin Detoxification.

The efficacy of nanosilicate clay platelets (NSCP), exfoliated silicates from natural montmorillonites, as a feed additive for ameliorating fumonisin B1 (FB1) toxicosis was evaluated. Toxicological mechanisms by NSCP were examined through proteomic and biochemical analyses. Dietary supplementation with NSCP at a low level of 40 mg/kg of feed improved growth performances in chickens with respect to FB1 toxicosis. Other issues of ameliorated symptoms including serum and/or hepatic aspartate aminotransferase activity, oxidative stress indicators, and sphinganine/sphingosine ratio, a hallmark of FB1 toxicosis, were considered. Chickens with NSCP inclusion alone at 1000 mg/kg of feed exhibited no changes in hepatic histology, oxidative status, and serum parameters and even had a higher feed intake. Proteomic analysis with liver tissues identified 45 distinct proteins differentially affected by FB1 and/or NSCP, in which proteins involved in thiol metabolism and redox regulation, glycolysis, carcinogenesis, and detoxification by glutathione S-transferase were promoted by FB1, whereas NSCP caused differential changes of protein abundances related to methionine/cysteine and choline/glycine interconversion for glutathione synthesis, redox regulation by peroxiredoxin, toxin/metabolite delivery by albumin, glycolysis, tricarboxylic acid cycle, adenosine triphosphate (ATP) synthesis, and chaperon escort for endoplasmic reticulum stress relief. Functional analyses confirmed the enhancement of hepatic metabolic processes for ATP and NAD(P)H production to meet the need for detoxification, antioxidative defense, and toxin/metabolite clearance by FB1 or NSCP ingestion. On the basis of the amelioration of FB1 toxicosis, global profile of hepatic protein expressions, and validated toxicological mechanisms, NSCP were concluded as a safe and effective agent for FB1 detoxification.

Enamel wear by antagonistic restorative materials under erosive conditions.

OBJECTIVES: This study aimed to analyse loss of enamel worn against composite, leucite glass ceramic or enamel antagonists under non-erosive and alternating or simultanuous erosive-attritive conditions. MATERIALS AND METHODS: Flat human enamel specimens were loaded (1 Hz, 300 g loading weight, each subgroup n = 12) with antagonists made from a hybrid-composite (Z250, 3 M Espe), a nano-composite (Filtek Supreme XTE, 3 M Espe), leucite glass ceramic (IPS Empress CAD LT, Ivoclar Vivadent) or enamel. Specimens were either submitted to mechanical loading in mineral solution (60 s) or to loading under alternating or simultaneous erosive conditions. For alternating erosion-attrition, specimens were eroded by citric acid (pH 2.6, 60 s) and then loaded with the respective antagonist for 60s. For simultaneous erosion-attrition, specimens were loaded with the respective antagonist while being immersed in citric acid (pH 2.6, 60 s). After each cycle, specimens were stored in water for 1 h. After 18 cycles, enamel loss was calculated profilometrically and statistically analysed by two-way ANOVA and Tukey's post-hoc tests (p < 0.05). RESULTS: Enamel loss (µm, mean ± standard deviation) was significantly highest for simultaneous erosion-attrition (ceramic 9.4 ± 1.1, hybrid-composite 8.3 ± 0.7, nano-composite 7.8 ± 1.2, enamel 7.4 ± 0.8) followed by alternating erosion-attrition (ceramic 3.5 ± 0.5, hybrid-composite 2.1 ± 0.8, nano-composite 1.0 ± 0.2, enamel 2.5 ± 0.7) and attrition in mineral solution (ceramic 0.5 ± 0.3, hybrid composite 0.3 ± 0.1, nano composite 0.1 ± 0.2, enamel 0.1 ± 0.1). Ceramic antagonists resulted in significantly higher loss than the remaining antagonistic materials when alternating or simultaneous erosion-attrition was performed. CONCLUSION: Erosive conditions had a massive impact on enamel worn against different antagonistic materials, with simultaneous erosive-attritive conditions being more detrimental than alternating erosive-attritive conditions. CLINICAL RELEVANCE: Enamel wear by antagonistic restorative materials is significantly influenced by erosive conditions.

Pleuroparenchymal fibroelastosis associated with aluminosilicate dust: a case report.

Idiopathic pleuroparenchymal fibroelastosis (IPPFE) is a recently described rare condition, characterized by pleural and subpleural parenchymal fibrosis, predominantly in the upper lobes. The clinical course of this disease is progressive and prognosis is poor, with little information regarding the etiology of IIPPFE. This report describes an IPPFE patient with convincing evidence of inhalational dust and suggests that dust exposure should be considered as a new causative factor of IPPFE.

Effect of Clinoptilolite and Sepiolite Nanoclays on Human and Parasitic Highly Phagocytic Cells.

Nanoclays have potential applications in biomedicine raising the need to evaluate their toxicity in in vitro models as a first approach to its biocompatibility. In this study, in vitro toxicity of clinoptilolite and sepiolite nanoclays (NC) was analyzed in highly phagocytic cultures of amoebas and human and mice macrophages. While amebic viability was significantly affected only by sepiolite NC at concentrations higher than 0.1 mg/mL, the effect on macrophage cultures was dependent on the origin of the cells. Macrophages derived from human peripheral blood monocytes were less affected in viability (25% decrease at 48 h), followed by the RAW 264.7 cell line (40%), and finally, macrophages derived from mice bone marrow monocytes (98%). Moreover, the cell line and mice macrophages die mainly by necrosis, whereas human macrophages exhibit increased apoptosis. Cytokine expression analysis in media of sepiolite NC treated cultures showed a proinflammatory profile (INFγ, IL-1α, IL-8, and IL-6), in contrast with clinoptilolite NC that induced lees cytokines with concomitant production of IL-10. The results show that sepiolite NC is more toxic to amoebas and macrophages than clinoptilolite NC, mostly in a time and dose-dependent manner. However, the effect of sepiolite NC was comparable with talc powder suggesting that both NC have low cytotoxicity in vitro.

Muscovite is protective against non-steroidal anti-inflammatory drug-induced small bowel injury.

AIM: To evaluate the effect of muscovite in preventing small bowel injury induced by nonsteroidal anti-inflammatory drugs (NSAIDs). METHODS: We recruited and screened thirty-two healthy volunteers who were randomly allocated equally into two groups: an NSAID control group, who received 75 mg slow-release diclofenac, twice daily for 14 d; and an NSAID-muscovite group, who received 3 g of muscovite in addition to the 75 mg of slow-release diclofenac, twice daily for 14 d. For gastroprotection, both groups were administered 20 mg/d of the proton pump inhibitor omeprazole. All eligible subjects underwent video capsule endoscopy (CE) prior to and 14 d after treatment. RESULTS: Thirty subjects (NSAID-muscovite group, n =16; NSAID control group, n =14) finally completed the whole trail. At the baseline CE examination, no statistically significant differences between the two groups have been observed. However, after 14 d of drug treatment, a significant difference was observed in the percentage of subjects with mucosal breaks when comparing the NSAID-muscovite group with the NSAID control group. While 71.4% (10/14) of subjects in the NSAID control group had at least one mucosal break, co-administration of muscovite in the NSAID-muscovite group reduced the rate to 31.3% (5/16) (P = 0.028). Moreover, higher number of mucosal breaks was found in the NSAID control group vs that in the NSAID-muscovite group (P < 0.05). CONCLUSION: Muscovite co-therapy reduced the incidence of small intestinal injury after 14 d of diclofenac administration.

Pleural plaques and their effect on lung function in Libby vermiculite miners.

BACKGROUND: Multiple studies have investigated the relationship between asbestos-related pleural plaques (PPs) and lung function, with disparate and inconsistent results. Most use chest radiographs to identify PPs and simple spirometry to measure lung function. High-resolution CT (HRCT) scanning improves the accuracy of PP identification. Complete pulmonary function tests (PFTs), including spirometry, lung volumes, and diffusing capacity of the lung for carbon monoxide, provide a more definitive assessment of lung function. The goal of this study was to determine, using HRCT scanning and complete PFTs, the effect of PPs on lung function in Libby vermiculite miners. METHODS: The results of HRCT scanning and complete PFTs performed between January 2000 and August 2012 were obtained from the medical records of 166 Libby vermiculite miners. Multivariate regression analyses with Tukey multivariate adjustment were used to assess statistical associations between the presence of PPs and lung function. Adjustments were made for age, BMI, smoking history, duration of employment, and years since last occupational asbestos exposure. RESULTS: Nearly 90% of miners (n = 149) had evidence of PPs on HRCT scan. No significant differences in spirometry results, lung volumes, or diffusing capacity of the lung for carbon monoxide were found between miners with PPs alone and miners with normal HRCT scans. Miners with both interstitial fibrosis and the presence of PPs had a significantly decreased total lung capacity in comparison with miners with normal HRCT scans (P = .02). Age, cumulative smoking history, and BMI were significant covariates that contributed to abnormal lung function. CONCLUSIONS: Asbestos-related PPs alone have no significant effect on lung function in Libby vermiculite miners.

In vivo biocompatibility versus degree of conversion of resin-reinforced cements in different time periods.

This study focused on test the null hypothesis that there is no difference between the degree of conversion and biocompatibility of different resin reinforced glass ionomer cements (RRGICs). Forty-eight male Wistar rats were used, distributed into four groups (n = 12), as follows: Group C (Control, polyethylene), Group FOB (Fuji Ortho Band), Group UBL (Ultra band Lok), and Group MCG (Multicure Glass), in subcutaneous tissue. The events of edema, necrosis, granulation tissue, multinuclear giant cells, young fibroblasts, and collagen formation were analyzed at 7, 15, and 30 days. The degree of conversion was evaluated by the Fourier method. Biocompatibility and degree of conversion were assessed using the Kruskal-Wallis and Dunn tests, and ANOVA and Tukey's test, respectively (P < 0.05). It was observed that, there was significant difference between Groups FOB and UBL for the presence of young fibroblasts at 15 days (P = 0.034) and between the Control and MCG Groups for the presence of multinucleated giant cells at 30 days (P = 0.009). Monomer conversion increased progressively until day 30, with significant difference between Group FOB and Groups UBL and MCG (P = 0.013) at 15 days. The null hypothesis was partially accepted, Fuji Ortho Band showed a less monomer conversion and a smaller number of young fibroblasts in the time of 15 days.

Clay nanotube encapsulation for functional biocomposites.

Natural halloysite clay nanotubes with 50 nm outer- and 15 nm inner- diameters are described as miniature vehicles for sustained release of drugs and proteins. The release time may be adjusted from 10 to 200 h with the tube surface polymeric coating. An explanation of sustained release through locking electrical potential at the nanotube ends is suggested. These biocompatible ceramic tubes may be also used for architectural construction of nanoshells on microbes through alternation with polycations to enhance the intrinsic properties of biological cells. Halloysite nanotubes (pristine or drug-loaded) are well mixable with polar and low-polar polymers allowing for functional biocomposites with enhanced mechanical strength, adhesivity and slow release of drugs or other chemical agents. Halloysite is nontoxic abundantly available from natural deposit material which does not require exfoliation or other complicated energy consuming processing.

Levels of lead, arsenic, mercury and cadmium in clays for oral use on the Dutch market and estimation of associated risks.

Pregnant women in Africa, Asia and Suriname, and some immigrants in Western societies, traditionally consume clay products known by a variety of names such as mabele, calabash chalk, sikor and pimba. Furthermore, clay is used for health purposes in Western societies. Because certain clays can contain high levels of metals and metalloids, the aim of this study was to determine lead, arsenic, mercury and cadmium in clay products for oral use available on the Dutch market. Traditional clays originating from Africa (n = 10) and Suriname (n = 26), and health clays (n = 27) were sampled from 2004 up to and including 2012. Total metal and metalloid contents were measured by ICP-MS and showed maximum levels of lead, arsenic, mercury and cadmium of 99.7, 45.1, 2.2 and 0.75 mg kg⁻¹, respectively. In the absence of maximum limits for these type of clays, the potential exposure was estimated from the determined concentration, the estimated daily use level of the clays, and the estimated bioaccessibility of the different metals and arsenic. The intake estimates were compared with existing health-based guidance values. For lead, the use of 34 of the 36 traditional clays and two of the 27 health clays would result in intake levels exceeding the toxicological limit by up to 20-fold. Use of 15 of the 35 traditional clays and 11 of the 27 health clays would result in intake levels exceeding the toxicological limit for inorganic arsenic by up to 19-fold. Although limited bioaccessibility from the clay may limit the exposure and exceedance of the health-based guidance values, it was concluded that lead and arsenic intakes from some clay products could be of concern also because of their use by pregnant women and the potential developmental toxicity. As a result the use of these products, especially by pregnant women, should be discouraged.

Comparison of different methods of glycerol preservation for deep anterior lamellar keratoplasty eligible corneas.

PURPOSE: To compare different methods of glycerol-preserved corneas intended for deep anterior lamellar keratoplasty (DALK). METHODS: We analyzed transparency, transmittance, thickness, biomechanics, morphology, and antigenicity of donor corneas preserved by four different glycerol-based methods (n = 6 per group) for 3 months, as follows: tissues in anhydrous glycerol without aluminosilicate molecular sieves at room temperature (GRT); tissues in anhydrous glycerol with aluminosilicate molecular sieves at room temperature (SRT); tissues in anhydrous glycerol without aluminosilicate molecular sieves at -78°C (G78); and tissues in anhydrous glycerol without aluminosilicate molecular sieves at -20°C (G20). RESULTS: Slit lamp images and transmittance curves obtained by spectrophotometer show that the G78 cornea was the most transparent tissue. Stress-strain behavior indicated that corneas in the G78 group were the most pliable, and SRT corneas were the stiffest. Electron microscopy analysis indicated that corneal cytoarchitecture and keratocyte integrity was destroyed in all glycerol-preserved corneas. Disorganized stromal collagen fibers were evident in groups stored at RT. Especially in SRT corneas, parallelism was lost, fibrils were extremely tortuous and discontinuous, and widespread fibril degeneration could be found. Antigenicity of tissue, assessed via immunohistochemistry for CD45-positive cells, HLA-ABC and HLA-DR, was lowered after glycerol preservation relative to fresh cornea tissues, and immunoreactivity was located mainly on corneal epithelium and limbus rather than stroma. CONCLUSIONS: Anhydrous glycerol preservation without molecular sieves in a -78°C freezer was the best method to obtain DALK-eligible tissues that were both transparent and pliable.

Mesothelioma associated with commercial use of vermiculite containing Libby amphibole.

OBJECTIVES: To describe asbestos-related mortality among manufacturing workers who expanded and processed Libby vermiculite that contained amphibole fiber. METHODS: Standardized mortality ratio was calculated for 465 white male workers 31 years after last Libby vermiculite exposure. RESULTS: Two workers died from mesothelioma, resulting in a significantly increased standardized mortality ratio of 10.5 (95% confidence interval, 1.3 to 38.0). These workers were in the upper 10th percentile of cumulative fiber exposure, that is, 43.80 and 47.23 fiber-years/cm, respectively. One additional worker with cumulative fiber exposure of 5.73 fiber-years/cm developed mesothelioma but is not deceased. There were no other significantly increased standardized mortality ratios. CONCLUSIONS: Workers expanding and processing Libby vermiculite in a manufacturing setting demonstrated an increased risk for the development of mesothelioma following exposure to the amphibole fiber contained within this vermiculite ore source.

Libby vermiculite exposure and risk of developing asbestos-related lung and pleural diseases.

PURPOSE OF REVIEW: The vermiculite ore formerly mined in Libby, Montana, contains asbestiform amphibole fibers of winchite, richterite, and tremolite asbestos. Because of the public health impact of widespread occupational and nonoccupational exposure to amphiboles in Libby vermiculite, numerous related studies have been published in recent years. Here we review current research related to this issue. RECENT FINDINGS: Excess morbidity and mortality classically associated with asbestos exposure have been well documented among persons exposed to Libby vermiculite. Excess morbidity and mortality have likewise been documented among persons with only nonoccupational exposure. A strong exposure-response relationship exists for many malignant and nonmalignant outcomes and the most common outcome, pleural plaques, may occur at low lifetime cumulative exposures. SUMMARY: The public health situation related to Libby, Montana, has led to huge investments in public health actions and research. The resulting studies have added much to the body of knowledge concerning health effects of exposures to Libby amphibole fibers specifically and asbestos exposure in general.

Solubility and chemistry of materials encountered by beryllium mine and ore extraction workers: relation to risk.

OBJECTIVE: Beryllium mine and ore extraction mill workers have low rates of beryllium sensitization and chronic beryllium disease relative to the level of beryllium exposure. The objective was to relate these rates to the solubility and composition of the mine and mill materials. METHOD: Medical surveillance and exposure data were summarized. Dissolution of BeO, ore materials and beryllium hydroxide, Be(OH)(2) was measured in synthetic lung fluid. RESULT: The ore materials were more soluble than BeO at pH 7.2 and similar at pH 4.5. Be(OH)(2) was more soluble than BeO at both pH. Aluminum dissolved along with beryllium from ore materials. CONCLUSION: Higher solubility of beryllium ore materials and Be(OH)(2) at pH 7.2 might shorten particle longevity in the lung. The aluminum content of the ore materials might inhibit the cellular immune response to beryllium.