A Primer to Angiotensin Peptide Isolation, Stability, and Analysis by Nano-Liquid Chromatography with Mass Detection.

The renin-angiotensin system (RAS) is an important element of cardiovascular and renal physiology and targeting the RAS by renin inhibitors, angiotensin (Ang) converting enzyme (ACE) inhibitors and Ang II type 1 receptor antagonists is effective in the treatment of hypertension, heart failure, and atherosclerosis. Quantification of Ang peptides is critical to establish the status of the RAS, but it is challenging due to low Ang peptides concentrations (fmol/mL or fmol/g), abundance of interfering substances, post sampling conversions, and difficulties with the specificity of the assay.In this chapter, we describe a new nano-LC/MS-based methodology for comprehensive, specific, sensitive, and accurate quantification of Ang peptides profile in plasma and tissue. We optimized sample pretreatment method (protein removal (acetonitrile precipitation) followed by solid-phase extraction (C18 silica bonded phase)), chromatographic conditions (reversed-phase nanochromatography with preconcentration), and mass detection (multiple reaction monitoring) of nine peptides: Ang-(1-12), Ang I (1-10), Ang-(1-9), Ang II (1-8), [Ala1]-Ang II, Ang III (2-8), Ang IV (3-8), Ang-(1-7), and [Ala1]-Ang-(1-7). Assessment of plasma and cardiac concentrations of Ang peptides in genetically modified atherosclerotic apolipoprotein E/LDL receptor double knockout (ApoE-/-/LDLR-/-) mice vs. wild types revealed changes in renin-angiotensin system consistent with an overactivation of ACE and impairment of ACE2. The method could be easily adopted for high-throughput analysis and for use in clinical applications such as diagnosis of the RAS abnormalities or monitoring of the RAS inhibition-based therapies.

Monolithic silica rods grafted with thermoresponsive anionic polymer brushes for high-speed separation of basic biomolecules and peptides.

Thermoresponsive anionic copolymer brushes, poly(N-isopropylacrylamide-co-acrylic acid-co-tert-butylacrylamide) [P(IPAAm-co-AAc-co-tBAAm)], were grafted onto a monolithic silica rod column through surface-initiated atom-transfer radical polymerization (ATRP) to prepare an effective thermoresponsive anionic chromatography matrix. An ATRP initiator was attached to the rod surface. N-Isopropylacrylamide (IPAAm), tert-butyl acrylate (tBA), tert-butylacrylamide (tBAAm), and the ATRP catalyst CuCl/CuCl2/tris[2-(N,N-dimethylamino)ethyl]amine were dissolved in 2-propanol, and the reaction mixture was pumped into the initiator-modified column. After grafting P(IPAAm-co-tBA-co-tBAAm) on the monolithic silica surfaces, deprotection of the tert-butyl group of tBA was performed. Chromatographic analysis showed that the prepared column was able to separate catecholamine derivatives and angiotensin subtypes within a shorter analysis time (5 min) than a silica-bead-packed column modified with the same copolymer brush could. These results indicated that the prepared copolymer-modified monolithic silica rod column may be a promising bioanalytical and bioseparation tool for rapid analysis of basic bioactive compounds and peptides.

Column coupling isotachophoresis-capillary electrophoresis with mass spectrometric detection: characterization and optimization of microfluidic interfaces.

Two-dimensional electrophoretic separations are one of the most promising tools for the continuously growing needs of different bioanalytical fields such as proteomics and metabolomics. In this work we present the design and the implementation of a two-dimensional electrophoretic separation coupled to mass spectrometry. We started our work studying the sample transfer characteristics of different microfluidic interfaces compatible with capillary coupling for two-dimensional electrophoretic separations. These junctions are aimed at method decoupling and sample transfer in a modular two-dimensional electrophoretic separation system. In order to perform the characterization of the interfaces, we carried out capillary electrophoresis experiments and numerical simulations using three cationic compounds under different flow conditions. The comparison of the experimental and simulation results enables us to clearly define the desirable characteristics of interfaces in order to achieve method orthogonality with lossless sample transfer in a two-dimensional separation system. Finally, we present a glass microfluidic chip as interface for the implementation of a novel hybrid modular system for performing two-dimensional electrophoretic separations involving isotachophoresis and capillary electrophoresis. In this setup we include mass spectrometric and contactless capacitively coupled conductivity detection to monitor the separation process. We demonstrate the ability of the setup to be used as a flexible analysis tool by performing preconcentration, separation, detection and identification of four different human angiotensin peptides.

Large-volume sample on-line concentration of angiotensins in non-aqueous capillary electrophoresis.

A single step on-line concentration and separation method for peptides in non-aqueous capillary electrophoresis was developed. ACN containing 50 mM tetraethylammonium perchlorate was used as the electrophoretic medium; angiotensins I-IV were separated as a result of the differences in the magnitudes of their interactions with perchlorate anions. When the sample solution (ACN containing 0.5% trifluoroacetic acid and angiotensins) was injected as a large-volume plug, the analytes were concentrated at the inlet end of the capillary by both sweeping and stacking mechanisms; the separation procedure then started automatically without any operations such as polarity change. It was found that the concentration of analytes, injection period, and concentration of tetraethylammonium perchlorate in the electrophoretic medium were important factors for both separation and concentration efficiencies. The angiotensins were concentrated and separated with the large-volume injection of up to 80% of the effective capillary length.

Effective separation of peptides using highly dense thermo-responsive polymer brush-grafted porous polystyrene beads.

For the development of well-defined highly dense thermo-responsive polymer grafted surface as an improved stationary phase for thermo-responsive chromatography, poly(N-isopropylacrylamide) (PIPAAm) brush-grafted porous polystyrene beads were prepared by surface-initiated atom transfer radical polymerization (ATRP). The PIPAAm grafted region of polystyrene beads was adjusted by the addition of isooctane as a poor solvent for polystyrene upon the reaction of ATRP initiator immobilization. Using a thermo-responsive HPLC column containing the prepared beads with PIPAAm brush grafted on the inside pores nearby the outer surfaces, angiotensin subtypes were effectively separated with aqueous mobile phase, because the densely grafted PIPAAm on nearby the outer surface effectively interacted with the peptides hydrophobically. Retention of basic peptide was achieved by the beads with basic mobile phase. These results indicated that the prepared beads with grafted PIPAAm nearby the outer surface became an effective chromatographic stationary phase for retaining basic peptides using wide pH range of mobile phase.

Rapid isolation of angiotensin peptides from plasma by electromembrane extraction.

The present study has for the first time demonstrated the isolation of peptides from human plasma by electromembrane extraction (EME). Angiotensin 1, angiotensin 2, and angiotensin 3 migrated from 500 microL of diluted plasma, through a thin layer of 1-octanol and 8% di-(2-ethylhexyl) phosphate immobilized as a supported liquid membrane (SLM) in the pores of a porous hollow fiber, and into a 25 microL aqueous acceptor solution present inside the lumen of the fiber. The driving force for the extraction was a 15 V potential difference applied across the SLM. After only 10 min of EME, the peptides were isolated from diluted plasma (pH 3) with extraction recoveries between 25 and 43%. After optimization, the extraction system was evaluated using spiked plasma samples of angiotensin 2. The evaluation was performed by liquid chromatography electrospray mass spectrometry, showing linearity of angiotensin 2 in the range 2.5-125.0 ng/mL (r(2)=0.989), and repeatability (RSD) between 5.6 and 11.6% (n=6). The results demonstrate the possibility of isolating angiotensin peptides from plasma in only 10 min, using electromembrane extraction. The experimental findings are therefore promising with regard to future peptide extractions.

Gradient elution in microchannel electrochromatography.

There is great interest in using microfluidic channels packed with a stationary phase for chemical separations of complex mixtures. A key advantage of such techniques is the use of electroosmotic flow (EOF), controlled simply by applying electrical potentials between reservoirs. A disadvantage for this technique, however, is a lack of compatibility with gradient elution separations. This limitation arises from the dependence of EOF velocity on run buffer content (including the concentration of organic modifier). Here, we introduce a method for implementing gradient elution in electrochromatography in which multiple run buffers are velocity-matched, such that the elution profile resembles that found in conventional HPLC. This method is driven entirely with EOF, meaning that pumps, valves, and pressure fittings are not required. The method was validated by application to separations of peptide standards and protein digests. These results suggest that microfluidic electrochromatography may be compatible with a wide range of applications that have previously been unexplored.

Simultaneous analysis of angiotensin peptides by LC-MS and LC-MS/MS: metabolism by bovine adrenal endothelial cells.

Liquid chromatography-electrospray ionization-mass spectrometry (LC-ESI-MS) and liquid chromatography-tandem mass spectrometry (LC-MS/MS) methods were developed to simultaneously determine the concentrations of angiotensin (Ang) II, Ang 1-7, Ang III, and Ang IV in biological samples. The samples were extracted with C18 solid-phase extraction cartridges and separated by a reverse-phase C18 column using acetonitrile in water with 0.1% formic acid as a mobile phase. Ang peptides were ionized by electrospray and detected by triple quadrupole MS in the positive ion mode. (M+3H)(3+) and (M+2H)(2+) ions were chosen as the detected ions in the single ion recording (SIR) mode for LC-MS. The limits of detection (signal/noise [S/N]=3) using SIR are 1 pg for Ang IV and 5 pg for Ang 1-7, Ang III, and Ang II. Multiple reaction monitoring (MRM) mode was used for LC-MS/MS. The limits of detection (S/N =3) using MRM are 20 pg for Ang IV and 25 pg for Ang 1-7, Ang III, and Ang II. These methods were applied to analyze Ang peptides in bovine adrenal microvascular endothelial cells. The results show that Ang II is metabolized by endothelial cells to Ang 1-7, Ang III, and Ang IV, with Ang 1-7 being the major metabolite.

Zwitterionic stationary phase with covalently bonded phosphorylcholine type polymer grafts and its applicability to separation of peptides in the hydrophilic interaction liquid chromatography mode.

A novel phosphorylcholine type zwitterionic stationary phase was synthesized by graft polymerization of 2-methacryloyloxyethyl phosphorylcholine onto the surface of porous silica particles. The resulting material possesses both negatively charged phosphoric acid and positively charged quaternary ammonium groups, which renders it a low net charge over a wide pH range. The composition of the surface grafts were determined by elemental analysis and solid state NMR, and the surface charge (zeta-potential) in different buffer solutions were measured using photon correlation spectroscopy. Separation of several peptides was investigated on packed columns in the hydrophilic interaction liquid chromatography (HILIC) separation mode. It was shown that small peptides can be separated based on hydrophilic interaction and ionic interaction between the stationary phase and analyte. The organic solvent composition, the pH and the salt concentration of the eluent have strong effects on the retention time. Compared to native silica before grafting, the newly synthesized zwitterionic material gave more stable retention times for basic peptides over pH range 3-7 due to elimination of the dissociation of silanol groups.

Ion-pair mediated transport of angiotensin, neurotensin, and their metabolites in liquid phase microextraction under acidic conditions.

This paper discusses the behaviour of angiotensin 1 and neurotensin together with their metabolites in a three-phase liquid phase microextraction under acidic conditions. Variations in donor phase, organic phase, and acceptor phase are studied with extraction recovery as response variable. It is proved that for all peptides the transport across the organic phase is mediated by heptane-1-sulphonic acid. n-Octanol gave overall best results as organic phase. A donor phase volume of 1.0 mL was chosen as a compromise between optimal recovery and robustness of the LPME device. The optimal pH of the donor phase (using acceptor phase of pH 2) was found to be different for the peptides, which opens opportunities for selective sample preparation. Decreasing the acceptor phase pH to 1.0 resulted in increased extraction recoveries. On using 1.0 mL of donor phase containing 50 mM heptane-1-sulphonic acid pH 3, n-octanol as organic phase immobilized in the pores of the fibre, and 20 microL of acceptor phase containing 0.1 mol/L HCl, extraction recoveries up to 82% (enrichment factor = 41) were achieved. To our knowledge this is the first report on liquid phase microextraction of angiotensins and neurotensins.

Cross-linked thermoresponsive anionic polymer-grafted surfaces to separate bioactive basic peptides.

Cross-linked, thermoresponsive poly(N-isopropylacrylamide-co-acrylic acid-co-N-tert-butylacrylamide) [poly(IPAAm-co-AAc-co-tBAAm)] thin hydrogel layers on silica beads were used as new column matrix modifiers for LC separation of basic bioactive peptides, angiotensin subtypes I, II, and III. Terpolymer poly(IPAAm-co-AAc-co-tBAAm) showed both phase transition and apparent carboxylate pKa shifts in water, depending on temperature. Polymer-grafted silica bead surfaces exhibited simultaneous thermally modulated changes in hydrophilic/hydrophobic properties and charge densities. More effective separation of angiotensin peptide subtypes was achieved on columns of these terpolymer thin hydrogel grafted surfaces, as compared to an uncharged control binary copolymer of IPAAm and tBAAm. Although hydrophobic interactions effect separation of angiotensin subtypes, combined electrostatic and hydrophobic interaction resulted in more pronounced retention. At temperature below the terpolymer phase transition, hydrophobic interactions predominated, and minimal changes in electrostatic interactions were supported by little shift in the apparent AAc carboxylate pKa values. Above the phase transition temperature, electrostatic interactions were dramatically reduced as a result of the decreased charge densities of the polymer grafted surfaces. Therefore, peptide retention times were also reduced, exhibiting a maximum at near 30-35 degrees C. Interestingly, column retention behavior of angiotensins is dramatically modulated by applied step temperature gradients. Thermoresponsive surface property alteration is a very rapid, reversible phenomenon, allowing step temperature gradients on thermoresponsive columns to enable the analogous performance advantages as gradient elution in reversed-phase HPLC. More importantly, injected peptides were recovered completely from the columns from calculation of peak area. In conclusion, these anionic thermoresponsive polymer-modified surfaces are good candidates for improved separation of bioactive peptides under exclusively aqueous conditions.

Separation and detection of angiotensin peptides by Cu(II) complexation and capillary electrophoresis with UV and electrochemical detection.

The use of capillary electrophoresis (CE) with on-capillary Cu(II) complexation for the determination of angiotensin and its metabolites is described. The resulting copper-peptide complexes can be detected using either UV or electrochemical (EC) detection. Optimal reaction and separation conditions for the angiotensin peptides were first determined using CE with UV detection. With UV detection, the limit of detection (signal-to noise ratio S/N = 3) for native angiotensin II was 18 microM, while the limit of detection (LOD) obtained for the copper-angiotensin II complex is 2 microM. CE with EC detection was then evaluated, yielding significantly lower LODs--2 microM for native angiotensin II and 200 nM for the copper-angiotensin II complex. The addition of copper to the run buffer improved the separation and sensitivity for both CE-UV and CE-EC detection. The method was demonstrated by monitoring the conversion of angiotensin I to angiotensin II in plasma via angiotensin-converting enzyme (ACE) and subsequent inhibition of ACE by captopril.

Capillary array electrophoresis-MALDI mass spectrometry using a vacuum deposition interface.

We previously introduced a vacuum deposition interface for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI/TOF MS) on a moving surface (e.g., quartz wheel, Mylar tape, metal target). In our present work, the approach has been extended to demonstrate parallel analysis for multiple on-line infusion MALDI MS and capillary array electrophoresis (CAE)-MALDI MS. In the infusion mode, individual peptide samples were simultaneously deposited on a Mylar tape cartridge using an array of eight capillaries, yielding eight parallel traces. For CAE-MALDI/TOF MS, the same number of separation capillaries were coupled with an array of eight infusion capillaries using a common liquid junction, containing matrix solution. A fast-scanning mirror was employed to traverse the beam of the desorption laser across the Mylar tape to probe one trace at a time. The positions of the eight sample traces formed on the tape were automatically determined, and all samples were analyzed in rapid sequence using a kilohertz repetition rate laser and a high-throughput data acquisition system. The instrumentation was operated with CAE MS for high-throughput analysis without compromising data quality. The principles of parallel separation-vacuum deposition should be generally applicable to MALDI/TOF MS analysis for proteomics and other areas where separation and high throughput are required.

New polymer-based prepacked column for the reversed-phase liquid chromatographic separation of peptides over the pH range 2-12.

The aim of this paper was to investigate the properties of a new column, Source 5RPC, for the separation of peptides at pH 2, 4.5, 7, 9 and 12 and to compare this product with similar polymer-based products available on the market. All columns were prepacked with 5 microm polystyrene-divinylbenzene polymer bead matrices and had dimensions of 150x4.6 mm I.D. Separations of angiotensin peptides were achieved on these columns using different equilibration solvents in the pH range 2-12 and elution with acetonitrile gradients. The separation of the peptide mixture obtained on Source 5RPC column was compared with that of two other commercially available polymer-based matrices. Method scouting and optimisation were carried out using the novel chromatography system, AKTA purifier.

Adrenal, kidney, and heart angiotensins in female murine Ren-2 transfected hypertensive rats.

We analyzed by high-performance liquid chromatography and radioimmunoassay angiotensin I (Ang I), Ang II, Ang-(1-7), and metabolites in the adrenal, kidney and heart of normotensive female Sprague-Dawley (SD) and transgenic hypertensive [TGR(mRen-2)27] rats carrying the murine Ren-2d renin gene. The monogenetic model of hypertensive rats had significant increases in adrenal Ang II; whereas in the kidney Ang II was unchanged, but Ang I and Ang-(1-7) were significantly lower. Cardiac Ang I, Ang II, and Ang-(2-10) were significantly reduced in transgenic rats, while Ang-(2-7) was increased. In SD and transgenic rats kidney and adrenal angiotensins increased primarily during estrus or proestrus. In female transgenic rats the increased adrenal Ang II and the sustained renal Ang II may contribute to the established phase of hypertension.

Determination of angiotensins by capillary electrophoresis.

A protocol to separate ten peptides of the angiotensin family by capillary electrophoresis was described. The experiment was carried out using the Waters Quanta 4000 Electrophoresis system and the steps taken to determine the optimum electrophoretic conditions include (i) the use of different electrolytes, (ii) variation of ionic composition and pH of the electrolytes, (iii) variation of applied voltage and the wavelength of ultraviolet detection. Successful separation of the ten angiotensin peptides was obtained using a voltage of 10 kV, 0.1 M phosphoric acid (pH 1.95) as electrolyte and ultraviolet detection at 185 nm. The protocol was then used to follow the metabolism of exogenous angiotensin I (ANG I) in rat lung homogenate and the separation and identification of an angiotensin peptide in human plasma. In addition to these two applications, the protocol can be used to separate and identify angiotensins and other peptides for which specific antibodies have yet to be developed.

Measurement of angiotensin II: use of two injectors to minimize HPLC shadowing.

We investigated the use of two HPLC injectors, one reserved for standards and the other for blanks or biological samples, to minimize shadowing in the measurement of angiotensin II (ANGII). HPLC carryover of standard ANGII to blank with a one-injector and a two-injector system were 47.0 +/- 5.0 and 2.4 +/- 0.5 fmol/ml, respectively, a 19.6-fold reduction. Measured normal canine left ventricular myocardium ANGII level by the two-injector HPLC-RIA system was 22.3 +/- 2.4 fmol/g, with a signal-to-noise ratio of 11.7, an improved signal-to-noise ratio of 29.3 fold vs. the one injector. This innovation reduced the incidence of false-positive ANGII results, and thus can be applied to other compounds that exhibit HPLC-derived shadowing.

An immunocytochemical comparison of the angiotensin and vasopressin hypothalamo-neurohypophysial systems in normotensive rats.

In the present study we investigated the possibility that angiotensin II/III and vasopressin coexist in the hypothalamo-neurohypophysial pathway. For our experiments 8-week-old male rats not treated with colchicine were used. The anatomical orientation of the entire pathway for angiotensin and vasopressin was facilitated by examining a series of subsequent coronal, horizontal and sagittal sections. Arching fibre tracts are formed mainly by projections emanating from cell bodies in the paraventricular nucleus, the accessory magnocellular nuclei, the supraoptic nucleus and the retrochiasmatic part of the supraoptic nucleus. The majority extend as far as the median eminence and the neurohypophysis, where major terminal fields exist. However, there is a difference between the staining pattern within the suprachiasmatic nucleus and the hypophysis. The results clearly show the colocalization of angiotensin and vasopressin in neurones as well as in fibres of the hypothalamo-neurohypophysial system.