[Research progress in biosynthesis of arbutin].

Arbutin, a glycosylated compound of hydroquinone, exists in two forms of ß-arbutin and α-arbutin based on the configuration of the glycosidic bond. As a safe and stable whitening agent, arbutin is widely used in cosmetics, and it has antioxidant, antimicrobial, anti-inflammatory, and anti-tumor activities. The production of arbutin by plant extraction faces challenges such as long plant growth periods, complex extraction processes, and low yields. The chemical synthesis of arbutin suffers from harsh reaction conditions, poor stereo-selectivity, and low yields. In recent years, biosynthesis emerges as the most popular method to produce arbutin because of the simple and mild reaction conditions, low costs, and environmental friendliness. This review summarizes the research progress in four biosynthetic strategies for arbutin, including plant conversion, enzyme catalysis, whole-cell catalysis, and microbial fermentation. The advantages and limitations of these biosynthetic strategies are discussed, and future research directions are proposed.

Integrated Metabolomics and Transcriptomics Analyses of the Biosynthesis of Arbutin and 6'-O-Caffeoylarbutin in Vaccinium dunalianum Cell Suspension Cultures Fed with Hydroquinone.

Arbutin and 6'-O-caffeoylarbutin (CA) from Vaccinium dunalianum Wight are known for their ability to inhibit melanin synthesis. To boost the production of arbutin and CA, precursor feeding with hydroquinone (HQ) was studied in V. dunalianum suspension cells. The effect of HQ on the biosynthesis of arbutin and CA in the suspension cells was investigated using high-performance liquid chromatography (HPLC), and possible molecular mechanisms were analyzed using metabolomics and transcriptomics analyses. HPLC analysis only showed that the addition of HQ significantly enhanced arbutin synthesis in cells, peaking at 15.52 ± 0.28 mg·g-1 after 0.5 mmol·L-1 HQ treatment for 12 h. Subsequently, metabolomics identified 78 differential expression metabolites (DEMs), of which arbutin and CA were significantly up-regulated metabolites. Moreover, transcriptomics found a total of 10,628 differential expression genes (DEGs). The integrated transcriptomics and metabolomics revealed that HQ significantly enhanced the expression of two arbutin synthase (AS) genes (Unigene0063512 and Unigene0063513), boosting arbutin synthesis. Additionally, it is speculated that CA was generated from arbutin and 3,4,5-tricaffeoylquinic acid catalyzed by caffeoyl transferase, with Unigene0044545, Unigene0043539, and Unigene0017356 as potentially associated genes with CA synthesis. These findings indicate that the precursor feeding strategy offers a promising approach for the mass production of arbutin and CA in V. dunalianum suspension cells and provides new insights for CA biosynthesis in V. dunalianum.

[Molecular modification of cyclodextrin glucosyltransferase and its application in the synthesis of α-arbutin].

α-arbutin has important applications in cosmetics and medicine. However, the extraction yield from plant tissues is relatively low, which restricts its application value. In this study, we investigated the synthesis of α-arbutin using maltodextrin as the donor and hydroquinone as the acceptor, using a cyclodextrin glucosyltransferase (CGTase) from Anaerobranca gottschalkii. We performed site-saturated and site-directed mutagenesis on AgCGTase. The activity of the variant AgCGTase-F235G-N166H was 3.48 times higher than that of the wild type. Moreover, we achieved a conversion rate of 63% by optimizing the reaction pH, temperature, and hydroquinone addition amount. Overall, this study successfully constructed a strain with improved conversion rate for the synthetic production of α-arbutin and hydroquinone. These findings have significant implications for reducing the industrial production cost of α-arbutin and enhancing the conversion rate of the product.

[Characterization of a sucrose phosphorylase from Leuconostoc mesenterides for the synthesis of α-arbutin].

Sucrose phosphorylase (SPase) gene from Leuconostoc mesenteroides ATCC 12291 was synthesised after codon optimization, and inserted into pET-28a plasmid to generate pET-28a-spase. The recombinant strain Escherichia coli BL21 (DE3)/pET-28a-spase was induced for Spase expression. The recombinant protein Spase was purified and characterized. The specific enzyme activity of SPase was 213.98 U/mg, the purification ratio was 1.47-fold, and the enzyme activity recovery rate was 87.80%. The optimal temperature and the optimal pH of the SPase were identified to be 45 °C and 6.5 respectively, and Km, Vmax and kcat of the SPase for sucrose was 128.8 mmol/L, 2.167 µmol/(mL·min), and 39 237.86 min-1. The recombinant SPase was used for α-arbutin production from hydroquinone and the reaction process was evaluated. The optimal conditions for synthesis of α-arbutin by SPase were 40 g/L hydroquinone, 5:1 molar ratio of sucrose and hydroquinone, and 250 U/mL recombinant SPase at pH 7.0 and 30 °C for 24 h in the dark, and then 500 U/mL glucoamylase was added at 40°C for 2.5 h. Under the optimized process, the yield of α-arbutin reached 98 g/L, and the hydroquinone conversion rate was close to 99%. In summary, the recombinant SPase was cloned and characterized, and its application for α-arbutin production was feasible.

Optimization of amylomaltase for the synthesis of α-arbutin derivatives as tyrosinase inhibitors.

α-Arbutin is widely used as a skin-whitening agent in the pharmaceutical and cosmetic industries because of its inhibitory effect on tyrosinase, an important enzyme for generating melanin pigments. Given the increasing demand for such products, we synthesized α- and ß-arbutin-α-D-glycosides through transglycosylation reactions catalyzed by a recombinant amylomaltase, using tapioca starch and α- and ß-arbutin as donor and acceptor molecules, respectively. The catalytic yield of products by the amylomaltase was greater with α-arbutin than with ß-arbutin. The highest glycoside yield (83%) was achieved by adjusting the following six parameters: starch and α-arbutin concentration, enzyme concentration, pH, temperature, and incubation time. The glycoside products were isolated and analyzed by HPLC, and two major products were identified by mass spectrometry and nuclear magnetic resonance spectroscopy, namely, α-arbutin-α-d-glucopyranoside (α-Ab-α-G1) and α-arbutin-α-d-maltopyranoside (α-Ab-α-G2). Both α-Ab-α-G1 and α-Ab-α-G2 are more water soluble than α-arbutin. Like α-arbutin, α-Ab-α-G1 and α-Ab-α-G2 showed competitive inhibition of human tyrosinase. However, their Ki values were 0.53 and 1.40 mM, respectively, which are slightly higher than that of α-arbutin (0.25 mM). The addition of glucosyl residues to α-arbutin improved its water solubility. Therefore, α-Ab-α-G1 and α-Ab-α-G2 could be easily absorbed by the skin and used as skin-whitening agents in pharmaceutical and cosmetic industries.

Engineering Yarrowia lipolytica for Enhanced Production of Arbutin.

Arbutin, a glycoside, is derived from the leaves of several plants, including wheat, pear, and bearberry plants, and has a significant role in the treatment of melanoma, cystitis, and cough. Here, we aimed to modify Yarrowia lipolytica to produce arbutin. To construct the arbutin synthetic pathway in Y. lipolytica, three genes (chorismate pyruvate-lyase (UbiC), 4-hydroxybenzoate 1-hydroxylase (MNX1), and hydroquinone glucosyltransferase (AS)) were codon-optimized and heterologously expressed. To maximize arbutin production, seven arbutin-biosynthesis molecular targets were overexpressed, and we found that the individual strengthening of DHS1 and DHS2 led to an 8.9- and 7.8-fold improvement in arbutin yield, respectively. Through optimization, a maximum arbutin titer of 8.6 ± 0.7 g/L was achieved using the finally engineered strain, po1f-At09. Overall, this is the first report of heterologous arbutin synthesis in Y. lipolytica at a high titer. Furthermore, this work opens a possibility for the overproduction of shikimate pathway derivatives in Y. lipolytica.

Chemical and Biocatalytic Routes to Arbutin †.

Arbutin (also called ß-arbutin) is a natural product occurring in the leaves of a variety of different plants, the bearberries of the Ericaceae and Saxifragaceae families being prominent examples. It is a ß-glucoside derived from hydroquinone (HQ; 1,4-dihydroxybenzene). Arbutin has been identified in traditional Chinese folk medicines as having, inter alia, anti-microbial, anti-oxidant, and anti-inflammatory properties that useful in the treatment of different ailments including urinary diseases. Today, it is also used worldwide for the treatment of skin ailments by way of depigmenting, which means that arbutin is a component of many products in the cosmetics and healthcare industries. It is also relevant in the food industry. Hundreds of publications have appeared describing the isolation, structure determination, toxicology, synthesis, and biological properties of arbutin as well as the molecular mechanism of melanogenesis (tyrosinase inhibition). This review covers the most important aspects with special emphasis on the chemical and biocatalytic methods for the production of arbutin.

Batch-feeding whole-cell catalytic synthesis of α-arbutin by amylosucrase from Xanthomonas campestris.

α-Arbutin is an effective skin-whitening cosmetic ingredient and can be synthesized through hydroquinone glycosylation. In this study, amylosucrase (Amy-1) from Xanthomonas campestris pv. campestris 8004 was newly identified as a sucrose-utilizing glycosylating hydroquinone enzyme. Its kinetic parameters showed a seven-time higher affinity to hydroquinone than maltose-utilizing α-glycosidase. The glycosylation of HQ can be quickly achieved with over 99% conversion when a high molar ratio of glycoside donor to acceptor (80:1) was used. A batch-feeding catalysis method was designed to eliminate HQ inhibition with high productivity (> 36.4 mM h-1). Besides, to eliminate the serious inhibition caused by the accumulated hydroquinone oxidation products, the whole-cell catalysis was further proposed. 306 mM of α-arbutin was finally achieved with 95% molar conversion rate within 15 h. Hence, the batch-feeding whole-cell biocatalysis by Amy-1 is a promising technology for α-arbutin production with enhanced yield and molar conversion rate.

Enhanced biosynthesis of arbutin by engineering shikimate pathway in Pseudomonas chlororaphis P3.

BACKGROUND: Arbutin is a plant-derived glycoside with potential antioxidant, antibacterial and anti-inflammatory activities. Currently, it is mainly produced by plant extraction or enzymatic processes, which suffers from expensive processing cost and low product yield. Metabolic engineering of microbes is an increasingly powerful method for the high-level production of valuable biologicals. Since Pseudomonas chlororaphis has been widely engineered as a phenazine-producing platform organism due to its well-characterized genetics and physiology, and faster growth rate using glycerol as a renewable carbon source, it can also be engineered as the cell factory using strong shikimate pathway on the basis of synthetic biology. RESULTS: In this work, a plasmid-free biosynthetic pathway was constructed in P. chlororaphis P3 for elevated biosynthesis of arbutin from sustainable carbon sources. The arbutin biosynthetic pathway was expressed under the native promoter Pphz using chromosomal integration. Instead of being plasmid and inducer dependent, the metabolic engineering approach used to fine-tune the biosynthetic pathway significantly enhanced the arbutin production with a 22.4-fold increase. On the basis of medium factor optimization and mixed fed-batch fermentation of glucose and 4-hydroxybenzoic acid, the engineered P. chlororaphis P3-Ar5 strain led to the highest arbutin production of 6.79 g/L with the productivity of 0.094 g/L/h, with a 54-fold improvement over the initial strain. CONCLUSIONS: The results suggested that the construction of plasmid-free synthetic pathway displays a high potential for improved biosynthesis of arbutin and other shikimate pathway derived biologicals in P. chlororaphis.

Recent progress on biological production of α-arbutin.

Arbutin, a glucoside of hydroquinone, is used as a powerful skin lightening agent in the cosmeceutical industry because of its strong inhibitory effect on the human tyrosinase activity. It is a natural compound occurring in a number of plants, with a ß-anomeric form of the glycoside bond between glucose and hydroquinone. α-Arbutin, which glycoside bond is generated with α-anomeric form, is the isomer of natural arbutin. α-Arbutin is generally produced by transglucosylation of hydroquinone by microbial glycosyltransferases. It is interesting that α-arbutin is found to be over 10 times more effective than arbutin, and thus biological production of α-arbutin attracts increasing attention. Seven different microbial enzymes have been identified to be able to produce α-arbutin, including α-amylase, sucrose phosphorlase, cyclodextrin glycosyltransferase, α-glucosidase, dextransucrase, amylosucrase, and sucrose isomerase. In this work, enzymatic and microbial production of α-arbutin is reviewed in detail.

High-level De novo biosynthesis of arbutin in engineered Escherichia coli.

Arbutin is a hydroquinone glucoside compound existing in various plants. It is widely used in pharmaceutical and cosmetic industries owing to its well-known skin-lightening property as well as anti-oxidant, anti-microbial, and anti-inflammatory activities. Currently, arbutin is usually produced by plant extraction or enzymatic processes, which suffer from low product yield and expensive processing cost. In this work, we established an artificial pathway in Escherichia coli for high-level production of arbutin from simple carbon sources. First, a 4-hydroxybenzoate 1-hydroxylase from Candida parapsilosis CBS604 and a glucosyltransferase from Rauvolfia serpentina were characterized by in vitro enzyme assays. Introduction of these two genes into E. coli led to the production of 54.71mg/L of arbutin from glucose. Further redirection of carbon flux into arbutin biosynthesis pathway by enhancing shikimate pathway genes enabled production of 3.29g/L arbutin, which is a 60-fold increase compared with the initial strain. Final optimization of glucose concentration added in the culture medium was able to further improve the titer of arbutin to 4.19g/L in shake flasks experiments, which is around 77-fold higher than that of initial strain. This work established de novo biosynthesis of arbutin from simple carbon sources and provided a generalizable strategy for the biosynthesis of shikimate pathway derived chemicals. The high titer achieved in our engineered strain also indicates the potential for industrial scale bio-manufacturing of arbutin.

Feeding strategies for the enhanced production of α-arbutin in the fed-batch fermentation of Xanthomonas maltophilia BT-112.

To develop a cost-effective method for the enhanced production of α-arbutin using Xanthomonas maltophilia BT-112 as a biocatalyst, different fed-batch strategies such as constant feed rate fed-batch, constant hydroquinone (HQ) concentration fed-batch, exponential fed-batch and DO-control pulse fed-batch (DPFB) on α-arbutin production were investigated. The research results indicated that DPFB was an effective method for α-arbutin production. When fermentation with DO-control pulse feeding strategy to feed HQ and yeast extract was applied, the maximum concentrations of α-arbutin and cell dry weight were 61.7 and 4.21 g/L, respectively. The α-arbutin production was 394% higher than that of the control (batch culture) and the molar conversion yield of α-arbutin reached 94.5% based on the amount of HQ supplied (240 mM). Therefore, the results in this work provide an efficient and easily controlled method for industrial-scale production of α-arbutin.

Transcriptional profiling of Gram-positive Arthrobacter in the phyllosphere: induction of pollutant degradation genes by natural plant phenolic compounds.

Arthrobacter chlorophenolicus A6 is a Gram-positive, 4-chlorophenol-degrading soil bacterium that was recently shown to be an effective colonizer of plant leaf surfaces. The genetic basis for this phyllosphere competency is unknown. In this paper, we describe the genome-wide expression profile of A.chlorophenolicus on leaves of common bean (Phaseolus vulgaris) compared with growth on agar surfaces. In phyllosphere-grown cells, we found elevated expression of several genes known to contribute to epiphytic fitness, for example those involved in nutrient acquisition, attachment, stress response and horizontal gene transfer. A surprising result was the leaf-induced expression of a subset of the so-called cph genes for the degradation of 4-chlorophenol. This subset encodes the conversion of the phenolic compound hydroquinone to 3-oxoadipate, and was shown to be induced not only by 4-chlorophenol but also hydroquinone, its glycosylated derivative arbutin, and phenol. Small amounts of hydroquinone, but not arbutin or phenol, were detected in leaf surface washes of P.vulgaris by gas chromatography-mass spectrometry. Our findings illustrate the utility of genomics approaches for exploration and improved understanding of a microbial habitat. Also, they highlight the potential for phyllosphere-based priming of bacteria to stimulate pollutant degradation, which holds promise for the application of phylloremediation.

[Properties of sucrose phosphorylase from recombinant Escherichia coli and enzymatic synthesis of alpha-arbutin].

Sucrose phosphorylase (EC 2.4.1.7, Sucrose phosphorylase, SPase) can be produced by recombinant strain Escherichia coli Rosetta(DE3)/Pet-SPase. Crude enzyme was obtained from the cells by the high pressure disruption and centrifugation. Sucrose phosphorylase was purified by Ni-NTA affinity column chromatography and desalted by ultrafiltration. The specific enzyme activity was 1.1-fold higher than that of the crude enzyme, and recovery rate was 82.7%. The purified recombinant SPase had a band of 59 kDa on SDS-PAGE. Thermostability of the enzyme was shown at temperatures up to 37 degrees C, and pH stability between pH 6.0 and 6.7. The optimum temperature and pH were 37 degrees C and 6.7, respectively. The K(m) of SPase for sucrose was 7.3 mmol/L, and Vmax was 0.2 micromol/(min x mg). Besides, alpha-arbutin was synthesized from sucrose and hydroquinone by transglucosylation with recombinant SPase. The optimal conditions for synthesis of alpha-arbutin were 200 U/mL of recombinant SPase, 20% of sucrose, and 1.6% hydroquinone at pH 6-6.5 and 25 degrees C for 21 h. Under these conditions, alpha-arbutin was obtained with a 78.3% molar yield with respect to hydroquinone, and the concentration of alpha-arbutin was about 31 g/L.

Sucrose isomerase and its mutants from Erwinia rhapontici can synthesise α-arbutin.

Sucrose isomerase (SI) from Erwinia rhapontici is an intramolecular isomerase that is normally used to synthesise isomaltulose from sucrose by a mechanism of intramolecular transglycosylation. In this study, it was found that SI could synthesise α-arbutin using hydroquinone and sucrose as substrates, via an intermolecular transglycosylation reaction. Five phenylalanine residues (F185, F186, F205, F297, and F321) in the catalytic pocket of SI were chosen for sitedirected mutagenesis. Mutants F185I, F321I, and F321W, whose hydrolytic activities were enhanced after the mutation, could synthesise α-arbutin through intermolecular transglycosylation with a more than two-fold increase in the molar transfer ratio compared with wild type SI. The F297A mutant showed a strong ability to synthesise a novel α-arbutin derivative and a four-fold increase in its specific activity for intermolecular transglycosylation over the wild type. Our findings may lead to a new way to synthesise novel glucoside products such as α-arbutin derivatives by simply manipulating the Phe residues in the catalytic pocket. From the structure superposition, our strategy of manipulating these Phe residues may be applicable to other similar transglycosylating enzymes.

Modulation of the regioselectivity of a Thermotoga neapolitana beta-glucosidase by site-directed mutagenesis.

Thermotoga neapolitana beta-glucosidase (BglA) was subjected to site-directed mutagenesis in an effort to increase its ability to synthesize arbutin derivatives by transglycosylation. The transglycosylation reaction of the wild-type enzyme displays major beta(1,6) and minor beta(1,3) or beta(1,4) regioselectivity. The three mutants, N291T, F412S, and N291T/F412S, increased the ratio of transglycosylation/hydrolysis compared with the wild-type enzyme when pNPG and arbutin were used as a substrate and an acceptor, respectively. N291T and N219T/F412s had transglycosylation/hydrolysis ratios about 3- and 8-fold higher, respectively, than that of the wild-type enzyme. This is due to the decreased hydrolytic activity of the mutant rather than increased transglycosylation activity. Interestingly, N291T showed altered regioselectivity, as well as increased transglycosylation products. TLC analysis of the transglycosylation products indicated that N291T retained its beta(1,3) regioselectivity, but lost its beta(1,4) and beta(1,6) regioselectivity. The altered regioselectivity of N291T using two other acceptors, esculin and salicin, was also confirmed by TLC. The major transglycosylation products of the wild type and N291T mutant were clearly different. This result suggests that Asn-291 is highly involved in the catalytic mechanism by controlling the transglycosylation reaction.

High cell density cultivation of Escherichia coli with surface anchored transglucosidase for use as whole-cell biocatalyst for alpha-arbutin synthesis.

A fed-batch culture strategy for the production of recombinant Escherichia coli cells anchoring surface-displayed transglucosidase for use as a whole-cell biocatalyst for alpha-arbutin synthesis was developed. Lactose was used as an inducer of the recombinant protein. In fed-batch cultures, dissolved oxygen was used as the feed indicator for glucose, thus accumulation of glucose and acetate that affected the cell growth and recombinant protein production was avoided. Fed-batch fermentation with lactose induction yielded a biomass of 18 g/L, and the cells possessed very high transglucosylation activity. In the synthesis of alpha-arbutin by hydroquinone glucosylation, the whole-cell biocatalysts showed a specific activity of 501 nkat/g cell and produced 21 g/L of arbutin, which corresponded to 76% molar conversion. A sixfold increased productivity of whole cell biocatalysts was obtained in the fed-batch culture with lactose induction, as compared to batch culture induced by IPTG.

[Studies on biotransformation of arbutin by 4-hydroxy phenol in hairy root of Polygonum multiflorum].

OBJECTIVE: To study the biotransformation of arbutin by 4-hydroxy phenol in hairy root of Polygonum multiflorum. METHOD: 4-hydroxy phenol was used as substrate, the standard curve was made by HPLC, and the influences of the co-culture time, the concentration of substrate added and the volume of culture flasks on biotransformation of arbutin were measured by the index of the production yield and transform rate of arbutin. RESULT: Arbutin could be detected from both of the cultures and medium. The correlation curve of arbutin: Y = 440740X - 1.473 (r = 0.9997). The production yield (2.22 g x L(-1)) and conversion ratio (81.45%) of arbutin reached the maximum amount as co-culture time at 72 h, substrate added in medium for 1100 mg x L(-1). Furthermore a large-scale culture of 3 L was also successful in our experiment. CONCLUSION: It was firstly to biosynthesis arbutin in hairy root of P. multiflorum. The production yield and trasfer rate of arbutin were increased largely. And large-scale production (3 L culture flask) of arbutin was achieved in the experiment and it would be valuable for the industrial production of arbutin by biotechnological method in the future.

Enzymatic synthesis of arbutin undecylenic acid ester and its inhibitory effect on melanin synthesis.

Transesterification of arbutin and undecylenic acid vinyl ester was catalyzed by alkaline protease, Bioprase, in dimethylformamide to get arbutin derivative having undecylenic acid at 6-position of glucose moiety, 6-O-undecylenoyl p-hydroxyphenyl beta-D-glucopyranoside. The reaction rate increased with increase of arbutin concentration, and when its concentration was 0.9 M, the conversion rate was more than 90% under addition of 2 M undecylenic acid vinyl ester. The obtained arbutin ester significantly suppressed melanin production in murine B16 melanoma cells.

Syntheses of alpha-arbutin-alpha-glycosides and their inhibitory effects on human tyrosinase.

Alpha-arbutin is a tyrosinase inhibitor. We synthesized alpha-arbutin-alpha-glycosides by the transglycosylation reaction of cyclomaltodextrin glucanotransferase from Bacillus macerans using alpha-arbutin and starch as acceptor and donor molecules, respectively. We isolated and characterized two major products from the reaction mixture. The structural analyses using 13C- and 1H-NMR spectroscopy proved that they were 4-hydroxyphenyl alpha-maltoside (alpha-Ab-alpha-G1) and 4-hydroxyphenyl alpha-maltotrioside (alpha-Ab-alpha-G2). Both alpha-Ab-alpha-G1 and alpha-Ab-alpha-G2 exhibited competitive-type inhibition on human tyrosinase as alpha-arbutin does. Their K(i) values were calculated to be 0.6 mM and 2.8 mM, respectively, which is slightly and significantly higher than that of alpha-arbutin (0.2 mM).