Utilization and transformation of Chrysotila dentata-derived dissolved organic matter by phycosphere bacteria Marinobacter hydrocarbonoclasticus and Bacillus firmus.

The dissolved organic matter (DOM) released from the cocoolithophores (Chrysotila dentata) was studied in laboratory experiments after co-culturing C. dentata with bacteria. Marinobacter hydrocarbonoclasticus (CA6)-γ-Proteobacteria and Bacillus firmus (CF2) were used to investigate the utilization and processing of the DOM derived from C. dentata, utilizing fluorescence excitation-emission matrix (EEM) combined with parallel factor analysis (EEM-PARAFAC), while measuring algal abundance and photosynthetic parameters. The experimental groups consisted of axenic C. dentata groups, filter cultured with bacteria (CA6 or CF2) groups, C. dentata co-cultured with bacteria (CA6 or CF2) groups and axenic bacteria (CA6 or CF2) groups. We then evaluated the processing of DOM by determining four fluorescence indices. The number of C. dentata cells and the photosynthetic capacity of microalgae were enhanced by CA6 and CF2. The main known fluorophores, including humic-like components and protein-like components, were present in all sample. The protein-like component of algal-bacterial co-cultures was effectively utilized by CA6 and CF2. The humic-like components increased at the end of the culture time for all cultures. Meanwhile, the average fluorescence intensity of protein-like in CA6 co-culture with algae was lower than that in CF2 co-culture with algae over time. On the other hand, the average fluorescence intensity of humic-like in CA6 was higher than CF2. However, the total change in fluorescence in humic-like and protein-like of axenic CF2 cultures was lower than that of CA6. Hence, the ability of CA6 to transform microalgal-derived DOM was superior to that of CF2, and CF2's ability to consume bacterial-derived DOM was superior to that of CA6.

Influence of biofertilizer on heavy metal bioremediation and enzyme activities in the soil to revealing the potential for sustainable soil restoration.

Overuse of chemical fertilizer and pesticides in agricultural activity is frequently damaging to soil health and can accumulate heavy metals in the soil environment, causing harm to plants, humans, and the ecosystem. This study was done to evaluate the effectiveness of biofertilizers in reducing heavy metal levels in contaminated soil and enhancing the activity of soil enzymes that are crucial to plant growth and development. Two bacteria strains, Pseudomonas aeruginosa. and Bacillus firmus, were chosen to develop biofertilizers based on molasses. The pot experiment was setup using a completely randomized design with four treatments and five levels; Bacillus firmus and Pseudomonas aeruginosa were used separately, and they were combined for the biofertilizer dose (20, 40, 60, 80, and 100 mL). Utilizing contaminated soils taken from a greenhouse farm the effect of biofertilizer on heavy metal bioremediation and soil enzyme activity was examined. Methods of soil agrochemical analysis were used to determine the soil physiochemical properties and the concentrations of heavy metals Cu, Fe, Zn, Cd, Mo, Mn, were determined by inductively coupled plasma-mass spectrometry ICP-MS, following DTPA extraction methods. In results, soil pH decreased from 8.28 to 7.39, Ec increased from 0.91 to 1.12, organic matter increased from 18.88 to 20.63 g/kg, N increased gradually from 16.7 to 24.4 mg/kg, and K increased from 145.25 to 201.4 mg/kg. The effect of biofertilizer treatment on soil physiochemical characteristics was significantly positive. Application of biofertilizer significantly increased the heavy metal bioavailability and the activities of soil enzymes. Soil pH were positively correlated with soil Zn (0.99819*), APK (0.95869*) activity and negatively correlated with Fe (0.96759*) also statistically significant at (p < 0.05). The soil Cu positively correlated with Fe (0.99645*), Cd (0.97866*), ß.D.GLU (0.99769*) and negatively correlated with PAK (- 0.9624*). Soil ARY had positive correlation with soil Mn (0.99683*), Cd (0.95695*), and negative correlation with PAK (- 0.99424*) at (p < 0.05). Soil enzyme activities were negatively correlated to heavy metals at a significant level. Collectively, the study highlights the potential of biofertilizers as a sustainable and effective approach to enhance soil health and remediate heavy metal-contaminated soils in greenhouses.

Biodegradation of di-2-ethylhexyl phthalate by Bacillus firmus MP04 strain: parametric optimization using full factorial design.

Di-2-ethylhexyl phthalate (DEHP) is used as a plasticizer in making plastics and released from landfills. This study attempted to degrade DEHP using microbial isolates. Isolates of Bacillus spp. were tested for their efficacy in degrading DEHP. Degradation was assessed using liquid chromatography-mass spectrometry (LC-MS). The most efficient DEHP degradation was achieved by Bacillus firmus MP04, which has been identified as Bacillus firmus MP04. This strain was found to use DEHP as the sole source of carbon without carbon source supplementation. Full factorial design was used to optimize the conditions for DEHP degradation which revealed the suitability of pH 7, 5% salt concentration, 20 to 37 °C temperature, and yeast extract as a nitrogen source. LC-MS elucidated the possible degradation mechanism via benzoic acid formation. However, prolonged incubation formed a typical compound denatonium benzoate due to reactions with other compounds. As maximum degradation was achieved in 4 days, prolonged incubation is not suggested. It can be concluded that new strain Bacillus firmus MP04 is the most efficient strain among all the tested strains for DEHP degradation.

Digestibility of Bacillus firmus K-1 pretreated rice straw by different commercial cellulase cocktails.

Removal of xylan in plant biomass is believed to increase cellulose hydrolysis by uncovering cellulose surfaces for cellulase adsorption and, in turn, catalysis reaction. Herein, we describe an eco-friendly method by culturing a xylanolytic Bacillus firmus K-1 on rice straw to remove xylan. The bacterium was grown on 2.5% (w/v) rice straw with different biomass particle sizes for two days at 37 °C. We found that the particle sizes ranged from <1 to 5 mm gave a similar xylan removal degree (about 21%). Besides, the porosity and disintegration of the rice straw fibers were observed at the molecular level. The digestibility of pretreated rice straw was tested with different commercial cellulase cocktails. We found that the pretreated rice straw was more susceptible to enzymatic hydrolysis, giving 30-70% glucan conversion than the untreated one. The degree of cellulose hydrolysis depended strongly on the kinds of enzyme and their formulations. HighlightCulturing B. firmus K-1 on rice straw yielded about 21% removal of xylan.Particle sizes (of 1-5 mm) had negligible effects on xylan removal efficiency.The degree of glucan conversion in pretreated biomass relied on enzyme formulation.

Bacillus firmus I-1582 promotes plant growth and impairs infection and development of the cyst nematode Heterodera schachtii over two generations.

Plant-parasitic nematodes wreak havoc on crops by root parasitism worldwide. An approach to combat nematode root parasitism is the application of antagonistic microbes like the rhizobacterium Bacillus firmus I-1582 which is promoted as biological control agent. Although B. firmus is a known nematode antagonist in general, the underlying mechanisms about its interaction with nematodes and plants have not yet been elucidated. Therefore, we explored the influence of B. firmus I-1582 as well as its extracellular and secreted molecules on plant-nematode interaction utilizing the plant-pathogen system Arabidopsis thaliana-Heterodera schachtii. We demonstrated that B. firmus I-1582 is attracted by A. thaliana root exudates, particularly by those of young plants. The bacterium colonized the root and showed a strictly pH-dependent development and plant growth promotion effect. Our results revealed that root colonization by B. firmus I-1582 significantly protected A. thaliana from infestation by the beet cyst nematode whereas dead bacterial cells or the culture supernatant were not effective. The bacterium also negatively affected nematode reproduction as well as pathogenicity and development of next generation nematodes. The obtained results highlight B. firmus I-1582 as a promising biocontrol agent that is well suited as an element of integrated control management strategies in sustainable agriculture.

Effects of Bacillus firmus e volumine ex muris cellulae 6x on cytolytic activity of natural killer cells in vitro

Natural killer (NK) cells are among the first in defense of the innate immune system by eliminating a variety of abnormal or stressed cells such as cancer cells or virus-infected cells. Individuals who exhibit low cytolytic NK cell activity are believed to be at higher risk of viral infection, tumorigenesis, and various other diseases of the immune system. Therefore, restoration of impaired NK cell function might be an essential step in immunostimulatory therapy of immunocompromised patients. Bacillus firmus is a non-pathogenic gram-positive bacterium of the environment, which possesses various immunomodulatory properties in vitro and in vivo. This retrospective study reports on the effect of B. firmus on the activity of NK cells in vitro. Basal cytolytic NK cell activity against tumor cells among peripheral blood mononuclear cells (PBMCs) of routine patients was determined in a standardized NK cell cytotoxicity assay. The impact of cultivation of PBMCs with B. firmus preparation Bacillus firmus e volumine ex muris cellulae (Bacillus firmus (evc)) 6x on tumor cell killing by NK cells was monitored in relation to basal NK cell activity. This study showed that stimulation of PBMCs with Bacillus firmus (evc) 6x in vitro led to a significant increase in NK cell function. Substantial improvement in cytolytic NK cell activity (more than 1.3-fold of basal activity) was much more pronounced for patients with compromised NK cell function. Due to its immunostimulatory mode of action, Bacillus firmus (evc) may be of particular importance in therapy of patients with NK cell deficiency.

Efficient biological pretreatment and bioconversion of corn cob by the sequential application of a Bacillus firmus K-1 cellulase-free xylanolytic enzyme and commercial cellulases.

We used agricultural residue, corn cob, with biorefinery and bioeconomy concepts. At short-time cultivation in corn cob (12 h), Bacillus firmus K-1 produced cellulase-free xylanolytic enzyme, with xylooligosaccharides (XOSs), X5 and X6, as the main products, which can be used in a variety of applications. The xylanolytic enzyme produced from B. firmus K-1 effectively degraded xylan in corn cob, which was examined by chemical composition, scanning electron microscope (SEM), and Fourier transform infrared spectroscopy (FTIR). After cultivation, the xylan contained in the corn cob residue was decreased (as biological pretreatment), causing morphological and structural changes, including creating porosity and increasing the surface area and the exposure of cellulose of pretreated corn cob. These results lead to an improvement of cellulose access by cellulases. Commercially available cellulases, Accellerase® 1500 and Cellic® CTec2, yielded significantly higher glucose concentrations from pretreated corn cob compared to untreated corn cob. After saccharification, the lignin-rich corn cob residue can be used as a raw material for other purposes. Moreover, the B. firmus cells, with a low risk to human health, can be used in some applications. This study presents an efficient method for producing high-value-added products from agricultural residue (corn cob) through biological processes which are environmentally friendly and economically viable. KEY POINTS: • High-value-added products were efficiently produced from corn cob by B. firmus K-1. • After biological pretreatment by B. firmus K-1, cellulase can better reach cellulose. • XOSs and cellulose-derived glucose were the main products from corn cob.

Identification of Multi-Potent Protein Subtilisin A from halophilic bacterium Bacillus firmus VE2.

Screening of halophiles with antimicrobial activity in saltpan soil samples from Nagapattinam district, Tamil Nadu, revealed isolate VE-2 as the most potent, identified as Bacillus firmus strain VE-2 through 16s rRNA gene sequencing. It had an optimum growth condition (OD 3.1) and antimicrobial protein (AMP) production (450 µg/mL) at 37 °C, pH 8, 25% NaCl, and 36 h incubation. SDS-PAGE analysis of the purified AMP showed the molecular weight of 36 kDa. HPLC analysis of the purified AMP showed different amino acids, such as asparagines, alanine, lysine, proline, threonine, glycine, cysteine, serine, aspartic acid leucine, and valine. Further characterization and identification using FT-IR, 2D-PAGE, MALDI-TOF, and in-silico analysis showed that the isolated AMP had the highest similarity to Subtilisin-A. It showed antibacterial activity against clinical bacterial pathogens like S. aureus, S. pyogenes, C. diphtheria, E. coli, and P. aeruginosa with the minimum inhibitory concentration (MIC) and the minimum bactericidal concentration of 2.5 µg/mL and 20 µg/mL and also against various fungal pathogens such as A. niger, A. flavus, C. albicans, C. tropicalis and C. parapsilosis with the MIC and minimum fungicidal concentrations of 1.25-80 µg/mL. The purified AMP had excellent antioxidant potential, showed a scavenging effect against DPPH and Nitric oxide radicals, and displayed anticancer activity against HeLa cell lines with the IC50 values 53 µg/mL. Hence, the purified bioactive antimicrobial peptides (AMP) could also be used in anticancer therapies.

Effect of N-terminal modification on the mode of action between the Xyn11A and Xylotetraose.

The purpose of this study was to gain an insight into the effects of mutation-induced binding pocket tilting of the Xyn11A xylanase from Bacillus firmus K-1 in producing a unique hydrolysis characteristic. In this study, the wildtype Xyn11A and its K40L mutant were compared for their hydrolysis patterns on beechwood xylan and xylooligosaccharides of sizes 2 to 6. According to our thin-layer chromatography experiment, the K40L mutant produced a larger amount of xylotetraose leftover than the wildtype. Kinetic determination of the WT and K40L mutant suggested that the higher X4 leftover on TLC was reflected in the decreasing catalytic efficiency (kcat/Km) between enzyme and X4. The mechanisms underlying this efficiency loss were examined through atomistic molecular dynamics (MD) simulations. The MD trajectory analysis showed that the mutation-induced binding pocket tilting resulted in an additional hydrophobic contact between the reducing end of X4 and Trp128. Meanwhile, the interactions between the non-reducing end and the Arg112 residue near the active site became lost, which could decrease the catalytic efficiency. This work suggested that the protein engineering to fine-tune the hydrolysis pattern for some desired xylooligosaccharide products was possible.

Effects of oligolignol sizes and binding modes on a GH11 xylanase inhibition revealed by molecular modeling techniques.

Lignin and phenolic compounds have been shown as the main recalcitrance for biomass decomposition, as they inhibit a number of lignocellulose-degrading enzymes. Understanding the inhibition mechanisms and energetic competitions with the native substrate is essential for the development of lignin resistive enzymes. In this study, atomistic detail of the size-dependent effects and binding modes of monomeric coniferyl alcohol, dimeric oligolignol, and tetrameric oligolignol made from coniferyl alcohols on the GH11 xylanase from Bacillus firmus strain K-1 was investigated by using molecular docking and atomistic molecular dynamics (MD) simulations. From the MD simulation results on the docked conformation of oligolignol binding within the "Cleft" and the "N-terminal," changes were observed both for protein conformations and positional binding of ligands, as binding with "Thumb" regions was found for all oligolignin models. Moreover, the uniquely stable "N-terminal" binding of the coniferyl alcohol monomer had no effect on the highly fluctuated Thumb region, showing no sign of inhibitory effect, and was in good agreement with recent studies. However, the inhibitory effect of oligolignols was size dependent, as the estimated binding energy of the tetrameric oligolignol became stronger than that of the xylohexaose substrate, and the important binding residues were identified for future protein engineering attempts to enhance the lignin resistivity of GH11. Graphical Abstract Size-dependent binding modes of coniferyl alcohol monomers (upper panels) and the dimers (lower panels). Uniquely stable "N-terminal" binding of the monomer is shown to have no effect on the binding pocket, and hence no sign of inhibition, which was in good agreement with some recent studies.

Characterisation of hyper tolerant Bacillus firmus L-148 for arsenic oxidation.

Groundwater arsenic pollution causes millions of deaths worldwide. Long term natural and anthropogenic activities have increased arsenic levels in groundwater causing higher threats of arsenic exposure. Arsenic hyper-tolerant Firmicute Bacillus firmus L-148 was isolated from arsenic limiting Lonar lake soil, which tolerated more than 3 M arsenic and could oxidize 75 mM arsenite [As(III)] in 14 days. It oxidized As(III) in presence of heavy metals and had unusual pH optima at 9.2. B. firmus L-148 was studied at the biochemical, protein, genomic and transcript level for understanding its arsenic oxidizing machinery. The proteomic and transcript analysis exhibited the presence of ars and aio operon and supported the inducible nature of ars operon. Robust, hyper-tolerant, fast As(III) oxidizing, least nutrient requiring and multi-metal resistance qualities of the strain were used in microcosm studies for bioremediation. Artificial groundwater mimicking microcosm with 75 mM As(III) was developed. Modulation of carbon source, iron and multi metals affected growth and As(III) oxidation rate. The As(III) oxidation was recorded to be 77% in 15 days in presence of sodium acetate and Fe ions. This microcosm study can be explored for bioremediation of arsenic contaminated water and followed by precipitation using other methods.

Synergistic effects between the additions of a disulphide bridge and an N-terminal hydrophobic sidechain on the binding pocket tilting and enhanced Xyn11A activity.

Synergistic effect of distal site-directed mutations and molecular mechanisms on the enhanced thermostability of GH11 xylanase from B. firmus Strain K-1 (xyn11A) was investigated through enzyme activity assays and atomistic molecular dynamics (MD) simulation. From the experiment, single N-terminal leucine substitution at K40L caused a significant drop in enzymatic activity. However, the addition of a disulphide bond at S100C/N147C, along with the K40L mutation enhanced the enzymatic activity at room temperature. Molecular mechanisms on the improvement of enzymatic activity were addressed through atomistic molecular dynamics (MD) simulations of enzyme-substrate complexes. Conformational analysis of the right-hand-shaped GH11 protein structures showed that K40L mutation 'tilted' the Palm region away from the Pinky finger at N-terminus and S100C/N147C tilted the Palm region towards the Pinky finger at N-terminus, which destabilized the binding complexes. The extended hydrophobic cluster formed within the K40L/S100C/N147C mutant stabilized the loops associated with the N-terminus and the Thumb region, which facilitated substrate binding and corresponded to the enhanced activity. This proposed mechanism could serve as a scheme for protein engineering to enhance enzymatic activity of GH11 enzymes at low temperatures.

Sequencing, cloning, and heterologous expression of cyclomaltodextrin glucanotransferase of Bacillus firmus strain 37 in Bacillus subtilis WB800.

Bacillusfirmus strain 37 produces the cyclomaltodextrin glucanotransferase (CGTase) enzyme and CGTase produces cyclodextrins (CDs) through a starch cyclization reaction. The strategy for the cloning and expression of recombinant CGTase is a potentially viable alternative for the economically viable production of CGTase for use in industrial processes. The present study used Bacillus subtilis WB800 as a bacterial expression host for the production of recombinant CGTase cloned from the CGTase gene of B. firmus strain 37. The CGTase gene was cloned in TOPO-TA® plasmid, which was transformed in Escherichia coli DH5α. The subcloning was carried out with pWB980 plasmid and transformation in B. subtilis WB800. The 2xYT medium was the most suitable for the production of recombinant CGTase. The enzymatic activity of the crude extract of the recombinant CGTase of B. subtilis WB800 was 1.33 µmol ß-CD/min/mL, or 7.4 times greater than the enzymatic activity of the crude extract of CGTase obtained from the wild strain. Following purification, the recombinant CGTase exhibited an enzymatic activity of 157.78 µmol ß-CD/min/mL, while the activity of the CGTase from the wild strain was 9.54 µmol ß-CD/min/mL. When optimal CDs production conditions for the CGTase from B. firmus strain 37 were used, it was observed that the catalytic properties of the CGTase enzymes were equivalent. The strategy for the cloning and expression of CGTase in B. subtilis WB800 was efficient, with the production of greater quantities of CGTase than with the wild strain, offering essential data for the large-scale production of the recombinant enzyme.

Bacillus firmus (SW5) augments salt tolerance in soybean (Glycine max L.) by modulating root system architecture, antioxidant defense systems and stress-responsive genes expression.

Soil salinity is an adverse abiotic factor which reduces plant growth, yield and quality. Plant growth-promoting rhizobacteria (PGPR) have a great potential to enhance growth and alleviate saline stress effects without harming the environment via regulating physiological and molecular processes in plants. This study aimed at investigating Bacillus firmus SW5 effects on the performance of soybean (Glycine max L.) subjected to salt stress (0, 40 and 80 mM NaCl). Salinity stress mitigated the growth and biomass yield, root architecture traits, nutrient acquisition, chlorophyll level, transpiration rate (E), photosynthesis rate (Pn), stomatal conductance (gs), soluble proteins content, soluble sugars content and total phenolics and flavonoid contents of soybean plants. High salinity augmented the levels of osmolytes (glycine betaine and proline), hydrogen peroxide (H2O2), malondialdehyde (MDA) and the activities of antioxidant enzymes (APX, CAT, SOD and POD) in soybean plants. High salinity also induced the expression of antioxidant enzyme-encoding genes (APX, CAT, POD, Fe-SOD) and genes conferring tolerance to salinity (GmVSP, GmPHD2, GmbZIP62, GmWRKY54, GmOLPb, CHS) in soybean plants. On the other hand, inoculation of NaCl-stressed soybean plants with Bacillus firmus SW5 promoted the growth and biomass yield, chlorophyll synthesis, nutrient uptake, gas exchange parameters, osmolytes levels, total phenolic and flavonoid contents, and antioxidant enzymes activities, in comparison with the plants treated with NaCl alone. Bacillus firmus SW5 inoculation also significantly reduced the IC50 values for both DPPH and ß-carotene-linoleic acid assays and indicated higher antioxidant activities in salt-stressed plants. Furthermore, contents of H2O2 and MDA were alleviated in salinity-stressed soybean plants inoculated with Bacillus firmus SW5, in comparison with those in plants exposed to NaCl alone. The antioxidant enzyme-encoding genes and stress-related genes exhibited the highest expression levels in soybean plants inoculated with Bacillus firmus SW5 and treated with 80 mM NaCl. Taken together, our results demonstrate the crucial role of Bacillus firmus SW5 in ameliorating the adverse effects of high salinity on soybean growth and performance via altering the root system architecture and inducing the antioxidant defense systems and stress-responsive genes expression.

Strain-specific quantification of root colonization by plant growth promoting rhizobacteria Bacillus firmus I-1582 and Bacillus amyloliquefaciens QST713 in non-sterile soil and field conditions.

Bacillus amyloliquefaciens QST713 and B. firmus I-1582 are bacterial strains which are used as active ingredients of commercially-available soil application and seed treatment products Serenade® and VOTiVO®, respectively. These bacteria colonize plant roots promoting plant growth and offering protection against pathogens/pests. The objective of this study was to develop a qPCR protocol to quantitate the dynamics of root colonization by these two strains under field conditions. Primers and TaqMan® probes were designed based on genome comparisons of the two strains with publicly-available and unpublished bacterial genomes of the same species. An optimized qPCR protocol was developed to quantify bacterial colonization of corn roots after seed treatment. Treated corn seeds were planted in non-sterile soil in the greenhouse and grown for 28 days. Specific detection of bacteria was quantified weekly, and showed stable colonization between ~104-105 CFU/g during the experimental period for both bacteria, and the protocol detected as low as 103 CFU/g bacteria on roots. In a separate experiment, streptomycin-resistant QST713 and rifampicin-resistant I-1582 strains were used to compare dilution-plating on TSA with the newly developed qPCR method. Results also indicated that the presence of natural microflora and another inoculated strain does not affect root colonization of either one of these strains. The same qPCR protocol was used to quantitate root colonization by QST713 and I-1582 in two corn and two soybean varieties grown in the field. Both bacteria were quantitated up to two weeks after seeds were planted in the field and there were no significant differences in root colonization in either bacteria strain among varieties. Results presented here confirm that the developed qPCR protocol can be successfully used to understand dynamics of root colonization by these bacteria in plants growing in growth chamber, greenhouse and the field.

Effects of helix and fingertip mutations on the thermostability of xyn11A investigated by molecular dynamics simulations and enzyme activity assays.

Local conformational changes and global unfolding pathways of wildtype xyn11A recombinant and its mutated structures were studied through a series of atomistic molecular dynamics (MD) simulations, along with enzyme activity assays at three incubation temperatures to investigate the effects of mutations at three different sites to the thermostability. The first mutation was to replace an unstable negatively charged residue at a surface beta turn near the active site (D32G) by a hydrophobic residue. The second mutation was to create a disulphide bond (S100C/N147C) establishing a strong connection between an alpha helix and a distal beta hairpin associated with the thermally sensitive Thumb loop, and the third mutation add an extra hydrogen bond (A155S) to the same alpha helix. From the MD simulations performed, MM/PBSA energy calculations of the unfolding energy were in a good agreement with the enzyme activities measured from the experiment, as all mutated structures demonstrated the improved thermostability, especially the S100C/N147C proved to be the most stable mutant both by the simulations and the experiment. Local conformational analysis at the catalytic sites and the xylan access region also suggested that mutated xyn11A structures could accommodate xylan binding. However, the analysis of global unfolding pathways showed that structural disruptions at the beta sheet regions near the N-terminal were still imminent. These findings could provide the insight on the molecular mechanisms underlying the enhanced thermostability due to mutagenesis and changes in the protein unfolding pathways for further protein engineering of the GH11 family xylanase enzymes.

Assessing the Effects of ILeVO and VOTiVO Seed Treatments on Reproduction, Hatching, Motility, and Root Penetration of the Soybean Cyst Nematode, Heterodera glycines.

Successful management of the soybean cyst nematode Heterodera glycines is limited by increased virulence of nematode populations on resistant soybean cultivars and persistence of the nematode in the soil in the absence of hosts. Seed treatments are now available for H. glycines management. However, it is unclear how these treatments affect specific life stages of the nematode. The objectives of this study were to assess the effects of ILeVO (with active ingredient fluopyram) and VOTiVO (with active ingredient Bacillus firmus I-1582) seed treatments on H. glycines reproduction and important processes in the nematode life cycle, such as second-stage juvenile (J2) hatching, motility, and root penetration. The effects of seed treated with formulated (ILeVO and VOTiVO) and nonformulated active ingredient (fluopyram and B. firmus I-1582) on H. glycines reproduction were conducted in a greenhouse. Nematode reproduction on plants grown from seed treated with ILeVO or technical fluopyram (active ingredient only) was reduced by 35 to 97% relative to the nontreated control, suggesting that the fluopyram active ingredient was affecting H. glycines directly and was not an inert ingredient in the seed treatment formulation. Hatching, motility, and root penetration experiments also were conducted using only the formulated seed treatments. Exudates collected from ILeVO-treated seed reduced J2 hatching and motility by more than 95% in laboratory assays. Exudates from radicles grown from ILeVO-treated seed reduced hatching in vitro by 48% in one run but had no significant effect in the second run compared with the nontreated control exudates. There also were no consistent effects of radicle exudates, regardless of treatment, on hatching and motility of the J2. ILeVO reduced root penetration of H. glycines J2 at different inoculation densities in a growth chamber experiment. VOTiVO did not affect any of the processes or life stages of the nematode studied. The results of this study indicate that the use of nematode-protectant seed treatments may be useful in controlling H. glycines; however, additional investigations into the precise effects of ILeVO and VOTiVO on H. glycines life processes and in different parts of the soil profile are necessary.

Cloning, purification and characterization of novel Cu-containing nitrite reductase from the Bacillus firmus GY-49.

Nitrite is generated from the nitrogen cycle and its accumulation is harmful to environment and it can be reduced to nitric oxid by nitrite reductase. A novel gene from Bacillus firmus GY-49 is identified as a nirK gene encoding Cu-containing nitrite reductase by genome sequence. The full-length protein included a putative signal peptide of 26 amino acids and shown 72.73% similarity with other Cu-containing nitrite reductase whose function was verified. The 993-bp fragment encoding the mature peptide of NirK was cloned into pET-28a (+) vector and overexpressed as an active protein of 36.41 kDa in the E.coli system. The purified enzyme was green in the oxidized state and displayed double gentle peaks at 456 and 608 nm. The specific activity of purified enzyme was 98.4 U/mg toward sodium nitrite around pH 6.5 and 35 °C. The K m and K cat of NirK on sodium nitrite were 0.27 mM and 0.36 × 103 s-1, respectively. Finally, homology model analysis of NirK indicated that the enzyme was a homotrimer structure and well conserved in Cu-binding sites for enzymatic functions. This is a first report for nitrite reductase from Bacillus firmus, which augment the acquaintance of nitrite reductase.

Effect of pH on optimization of photofermentative hydrogen production by co-culture of Rhodobacter sphaeroides-NMBL-02 and Bacillus firmus-NMBL-03.

Rhodobacter sphaeroides NMBL-02, photosynthetic purple non sulfur (PNS) bacteria and associated Bacillus firmus NMBL-03 were isolated from water sample collected from 15-20 inches beneath the surface of ponds from Northern region of India in modified Sistrom's media (120 ml) containing 3 g/L malate and 1.2 g/L ammonium sulfate. The isolation was done in air tight serum bottles (120 ml) under tungsten bulb (1.8 kLux light intensity) at 30 oC ± 2 oC. The PNS and heterotrophic bacteria associated with the culture was purified by clonal selection method and characterized by 16S rDNA sequencing. The PNS isolate was identified as Rhodobacter sphaeroides NMBL-02 (ID: 1467407, Accession BANKIT: JN256030) and associated heterotroph as Bacillus firmus NMBL-03 (Gene Bank Accession no.: JN 256029). The effect of initial medium pH on optimization of hydrogen production was investigated in batch process. The maximum hydrogen potential and hydrogen production rate was 2310 ± 55 ml/L and 4.75 ml/L culture/h respectively using glutamate (1.7 mmol/L) as nitrogen source and malate (22.38 mmol/L) as carbon source with 76.39% malate conversion efficiency at initial medium pH 5.0. This co-culture has the ability to produce significant amount of hydrogen in the pH range of 5.0 to 10.0 with 76.39% to 35.71% malate conversion respectively.

Exploitation of dark fermented effluent of cheese whey by co-culture of Rhodobacter sphaeroides and Bacillus firmus for photo-hydrogen production.

In this study photo-hydrogen production from cheese whey dark fermentation (DF) effluent by the co-culture of Rhodobacter sphaeroides -NMBL-01 and Bacillus firmus - NMBL-03 has been reported. The effect of pH, initial chemical oxygen demand (COD) and the concentration effect of FeSO4.7H2O on photo-hydrogen production have been investigated. The end products of dark fermentation effluent of cheese whey were mainly comprised of soluble organic acids, i.e. butyric acid and lactic acid. The batch process was carried out under light intensity of 2.5 kLux at 32 ± 2oC without any addition of extra carbon and nitrogen source. The single parameter optimization studies revealed optimum pH 6.5, initial COD 4.71 g/L and supplementation of Fe2+ concentration 100 mg/L. The maximum cumulative hydrogen production and yield were found to be 469 ± 45.8 ml H2/L and 146.56 ± 14.31 ml H2/g COD reduced (67.9% reduction in COD) respectively. The mutual interactions among the process parameters were also investigated by three factorial Box-Behnken design of response surface methodology. The optimized experimental values were found concurrent with the calculated values obtained from the theoretical model.