Plaque Size Tool: An automated plaque analysis tool for simplifying and standardising bacteriophage plaque morphology measurements.

Bacteriophage plaque size measurement is essential for phage characterisation, but manual size estimation requires a considerable amount of time and effort. In order to ease the work of phage researchers, we have developed an automated command-line application called Plaque Size Tool (PST) that can detect plaques of different morphology on the images of Petri dishes and measure plaque area and diameter. Plaque size measurements using PST showed no difference to those obtained with manual plaque size measurement in Fiji, indicating future results using PST are backwards compatible with prior measurements in the literature. PST can be applied to a range of lytic bacteriophages producing oval-shaped plaques, including bull's-eye and turbid morphology. The application can also be used for titer calculation if most of the plaques are stand-alone. As laboratory automation becomes more commonplace, standardised and flexible open-source analytical tools like PST will be important parts of biofoundry and cloud lab bacteriophage workflows.

Enhancement of tomogram interpretability using the locked self-rotation function.

The interpretation of cryo-electron tomograms of macromolecular complexes can be difficult because of the large amount of noise and because of the missing wedge effect. Here it is shown how the presence of rotational symmetry in a sample can be utilized to enhance the quality of a tomographic analysis. The orientation of symmetry axes in a sub-tomogram can be determined using a locked self-rotation function. Given this knowledge, the sub-tomogram density can then be averaged to improve its interpretability. Sub-tomograms of the icosahedral bacteriophage phiX174 are used to demonstrate the procedure.

Icosahedral bacteriophage ΦX174 forms a tail for DNA transport during infection.

Prokaryotic viruses have evolved various mechanisms to transport their genomes across bacterial cell walls. Many bacteriophages use a tail to perform this function, whereas tail-less phages rely on host organelles. However, the tail-less, icosahedral, single-stranded DNA ΦX174-like coliphages do not fall into these well-defined infection processes. For these phages, DNA delivery requires a DNA pilot protein. Here we show that the ΦX174 pilot protein H oligomerizes to form a tube whose function is most probably to deliver the DNA genome across the host's periplasmic space to the cytoplasm. The 2.4 Å resolution crystal structure of the in vitro assembled H protein's central domain consists of a 170 Å-long α-helical barrel. The tube is constructed of ten α-helices with their amino termini arrayed in a right-handed super-helical coiled-coil and their carboxy termini arrayed in a left-handed super-helical coiled-coil. Genetic and biochemical studies demonstrate that the tube is essential for infectivity but does not affect in vivo virus assembly. Cryo-electron tomograms show that tubes span the periplasmic space and are present while the genome is being delivered into the host cell's cytoplasm. Both ends of the H protein contain transmembrane domains, which anchor the assembled tubes into the inner and outer cell membranes. The central channel of the H-protein tube is lined with amide and guanidinium side chains. This may be a general property of viral DNA conduits and is likely to be critical for efficient genome translocation into the host.

The role of surface functionalization of colloidal alumina particles on their controlled interactions with viruses.

Materials that interact in a controlled manner with viruses attract increasing interest in biotechnology, medicine, and environmental technology. Here, we show that virus-material interactions can be guided by intrinsic material surface chemistries, introduced by tailored surface functionalizations. For this purpose, colloidal alumina particles are surface functionalized with amino, carboxyl, phosphate, chloropropyl, and sulfonate groups in different surface concentrations and characterized in terms of elemental composition, electrokinetic, hydrophobic properties, and morphology. The interaction of the functionalized particles with hepatitis A virus and phages MS2 and PhiX174 is assessed by virus titer reduction after incubation with particles, activity of viruses conjugated to particles, and imaged by electron microscopy. Type and surface density of particle functional groups control the virus titer reduction between 0 and 99.999% (5 log values). For instance, high sulfonate surface concentrations (4.7 groups/nm(2)) inhibit attractive virus-material interactions and lead to complete virus recovery. Low sulfonate surface concentrations (1.2 groups/nm(2)), native alumina, and chloropropyl-functionalized particles induce strong virus-particle adsorption. The virus conformation and capsid amino acid composition further influence the virus-material interaction. Fundamental interrelations between material properties, virus properties, and the complex virus-material interaction are discussed and a versatile pool of surface functionalization strategies controlling virus-material interactions is presented.

Uncoupling the functions of a multifunctional protein: the isolation of a DNA pilot protein mutant that affects particle morphogenesis.

Defective øX174 H protein-mediated DNA piloting indirectly influences the entire viral lifecycle. Faulty piloting can mask the H protein's other functions or inefficient penetration may be used to explain defects in post-piloting phenomena. For example, optimal synthesis of other viral proteins requires de novo H protein biosynthesis. As low protein concentrations affect morphogenesis, protein H's assembly functions remain obscure. An H protein mutant was isolated that allowed morphogenetic effects to be characterized independent of its other functions. The mutant protein aggregates assembly intermediates. Although excess internal scaffolding protein restores capsid assembly, the resulting mutant H protein-containing particles are less infectious. In addition, nonviable phenotypes of am(H) mutants in Su+ hosts, which insert non-wild-type amino acids, do not always correlate with a lack of missense protein function. Phenotypes are highly influenced by host and phage physiology. This phenomenon was unique to am(H) mutants, not observed with amber mutants in other genes.

Normal-flow virus filtration: detection and assessment of the endpoint in bio-processing.

The breakthrough of a model virus, bacteriophage PhiX-174, through normal-flow virus filters was studied using both commercial process fluids and model feed streams. The results indicate that (i) PhiX-174 is a reasonable model for a mammalian parvovirus [MMV (murine minute virus)] in virus filtration studies; (ii) PhiX-174 LRV [log(reduction value)] shows a better correlation with percentage flow decline compared with volume processed under a variety of conditions; (iii) although the extent of decline in virus LRV is dependent on the mechanism of filter fouling, the fouling mechanisms operative in a viral validation study are representative of those likely to be found under actual production conditions. The mechanism of LRV decline by many process streams was proposed to be due to selective plugging of small pores. A theoretical model as well as a predictive equation for LRV decline versus flow decay was derived; experimental results from filtration studies using pore-plugging feed stocks were consistent with the equation. As protein solutions may vary in their adsorptive versus plugging behaviour during filtration, an evaluation of the LRV-versus-flow-decay relationship on a biopharmaceutical-product-specific basis may be warranted.

Structures of virus and virus-like particles.

Virus structures continue to be the basis for mechanistic virology and serve as a paradigm for solutions to problems concerning macromolecular assembly and function in general. The use of X-ray crystallography, electron cryomicroscopy and computational and biochemical methods has provided not only details of the structural folds of individual viral components, but also insights into the structural basis of assembly, nucleic acid packaging, particle dynamics and interactions with cellular molecules.

Structure of a viral procapsid with molecular scaffolding.

The assembly of a macromolecular structure proceeds along an ordered morphogenetic pathway, and is accomplished by the switching of proteins between discrete conformations as they are added to the nascent assembly. Scaffolding proteins often play a catalytic role in the assembly process, rather like molecular chaperones. Although macromolecular assembly processes are fundamental to all biological systems, they have been characterized most thoroughly in viral systems, such as the icosahedral Escherichia coli bacteriophage phiX174. The phiX174 virion contains the proteins F, G, H and J. During assembly, two scaffoldingproteins B and D are required for the formation of a 108S, 360-A-diameter procapsid from pentameric precursors containing the F, G and H proteins. The procapsid contains 240 copies of protein D, forming an external scaffold, and 60 copies each of the internal scaffolding protein B, the capsid protein F, and the spike protein G. Maturation involves packaging of DNA and J proteins and loss of protein B, producing a 132S intermediate. Subsequent removal of the external scaffold yields the mature virion. Both the F and G proteins have the eight-stranded antiparallel beta-sandwich motif common to many plant and animal viruses. Here we describe the structure of a procapsid-like particle at 3.5-A resolution, showing how the scaffolding proteins coordinate assembly of the virus by interactions with the F and G proteins, and showing that the F protein undergoes conformational changes during capsid maturation.

A sensitive method for evaluating condoms as virus barriers.

A standard test is needed to evaluate condoms as barriers against sexually transmitted diseases, particularly those caused by viruses. The proposed method presented here consists of a previously published simple method using physiologic-based conditions plus improvements to increase test sensitivity and decrease confounding factors such as contamination. Limitations of the method were determined by measuring virus penetration through small, well-defined holes. The method can detect penetration of 2 nL (2 x 10(-6) mL) of challenge virus suspension as well as a hole of 2 microns diameter in a latex condom. The data also indicated that virus penetration of latex condoms occurred quickly, and the hole was then apparently closed or blocked.

PIP: Condoms can act as barriers to the passage of sexually transmitted diseases (STDs). However, a claim that condoms are effective against STDs must be confirmed by appropriate laboratory tests. Various tests have therefore been developed to evaluate the barrier effectiveness of latex and natural membrane condoms. The authors describe and evaluate a test which involves filling the condom with virus-containing buffer and determining whether any virus penetrates the barrier during submersion in a collection buffer. Virus penetration is measured and reported as the equivalent volume of challenge virus suspension needed to account for the amount of virus penetration. The limitations of this approach were determined by measuring virus penetration through small, well-defined holes. It was found that the method can detect penetration of 2 nl of challenge virus suspension as well as a hole of 2 mcm diameter in a latex condom. The data also indicate that virus penetration of latex condoms occurs quickly, then the hole apparently closes or is blocked.

Identification of spherical virus particles in digitized images of entire electron micrographs.

New methods are described that should facilitate high-resolution (5-10 A) image reconstructions from low-dose, low-contrast electron micrographs of frozen-hydrated specimens and processing of large, digital images produced by new imaging devices and modern electron microscopes. Existing techniques for automatic selection of images of individual biological macromolecules from electron micrographs are inefficient or unreliable. We describe the Crosspoint method (CP), which produces good quality solutions with relatively small miss rates and few false hits, and an extension of this method along with a procedure for refining its solution. Two algorithms for processing large images, one based on image subsampling, the other on image decomposition, are described. A large image is first compressed (e.g., by subsampling) and the CP method is applied to the compressed image to produce an initial solution. The information gathered at this stage is used to cut the original image into subimages and then to refine the particle coordinates in each subimage. An interactive environment for experimenting with particle identification methods is described.

The ordered assembly of the phiX174-type primosome. I. Isolation and identification of intermediate protein-DNA complexes.

The phiX-type primosome was discovered during the resolution and reconstitution in vitro of the complementary strand DNA replication step of the phiX174 viral life cycle. This multienzyme bidirectional helicase-primase complex can provide the DNA unwinding and Okazaki fragment-priming functions at the replication fork and has been implicated in cellular DNA replication, repair, and recombination. We have used gel mobility shift assays and enhanced chemiluminescence Western analysis to isolate and identify the pathway of primosome assembly at a primosome assembly site (PAS) on a 300-nucleotide-long single-stranded DNA fragment. The first three steps do not require ATP and are as follows: (i) PriA recognition and binding to the PAS, (ii) stabilization of the PriA-PAS complex by the addition of PriB, and (iii) formation of a PriA-PriB-DnaT-PAS complex. Subsequent formation of the preprimosome involves the ATP-dependent transfer of DnaB from a DnaB-DnaC complex to the PriA-PriB-DnaT-PAS complex. The final preprimosomal complex contains PriA, PriB, DnaT, and DnaB but not DnaC. A transient interaction between the preprimosome and DnaG generates the five-protein primosome. As described in an accompanying article (Ng, J. Y., and Marians, K. J. (1996) J. Biol. Chem. 271, 15649-15655), when assembled on intact phiX174 phage DNA, the primosome also contains PriC.

The ordered assembly of the phiX174-type primosome. II. Preservation of primosome composition from assembly through replication.

Gel filtration chromatography was used to isolate both preprimosomal and primosomal complexes formed on single-stranded DNA-binding protein-coated phiX174 DNA by the combination of PriA, PriB, PriC, DnaT, DnaB, DnaC, and DnaG. The presence and relative amounts of primosomal proteins in these complexes were determined by Western blotting. Protein-DNA complexes isolated (i) after assembly in the presence of 10 microM ATP, (ii) after preprimosome movement in the presence of 1 mM ATP, (iii) after priming in the presence of the four ribonucleoside triphosphates, or (iv) after complementary strand DNA replication in the presence of the DNA polymerase III holoenzyme all had the same protein composition; preprimosomes contained PriA, PriB, PriC, DnaT, and DnaB, whereas primosomes included DnaG. The stable association of DnaG with the protein-DNA complex could be attributed partially to its ability to remain bound to the primers synthesized. In the absence of PriC, the efficiencies of priming and replication were reduced by one-third and one-half, respectively, even though PriC was not required for the formation of stable protein-DNA complexes on a 304-nucleotide-long single strand of DNA containing a primosome assembly site (Ng, J. Y., and Marians, K. J. (1996) J. Biol. Chem. 271, 15642-15648). We hypothesize that maintenance of the primosome on the replicated DNA may provide a mechanism to allow primosomes to participate in the resolution of recombination intermediates and intermediates formed during double strand break repair by permitting the re-establishment of a replication fork.

Host and phi X 174 mutations affecting the morphogenesis or stabilization of the 50S complex, a single-stranded DNA synthesizing intermediate.

The morphogenetic pathway of bacteriophage phi X 174 was investigated in rep mutant hosts that specifically block stage III single-stranded DNA synthesis. The defects conferred by the mutant rep protein most likely affect the formation or stabilization of the 50S complex, a single-stranded DNA synthesizing intermediate, which consists of a viral prohead and a DNA replicating intermediate (preinitiation complex). phi X 174 mutants, ogr (rep), which restore the ability to propagate in the mutant rep hosts, were isolated. The org (rep) mutations confer amino acid substitutions in the viral coat protein, a constituent of the prohead, and the viral A protein, a constituent of the preinitiation complex. Four of the six coat protein substitutions are localized on or near the twofold axis of symmetry in the atomic structure of the mature virion.

DNA packaging intermediates of bacteriophage φX174

BACKGROUND: Like many viruses, bacteriophage phi X174 packages its DNA genome into a procapsid that is assembled from structural intermediates and scaffolding proteins. The procapsid contains the structural proteins F, G and H, as well as the scaffolding proteins B and D. Provirions are formed by packaging of DNA together with the small internal J proteins, while losing at least some of the B scaffolding proteins. Eventually, loss of the D scaffolding proteins and the remaining B proteins leads to the formation of mature virions. RESULTS: phi X174 108S 'procapsids' have been purified in milligram quantities by removing 114S (mature virion) and 70S (abortive capsid) particles from crude lysates by differential precipitation with polyethylene glycol. 132S 'provirions' were purified on sucrose gradients in the presence of EDTA. Cryo-electron microscopy (cryo-EM) was used to obtain reconstructions of procapsids and provirions. Although these are very similar to each other, their structures differ greatly from that of the virion. The F and G proteins, whose atomic structures in virions were previously determined from X-ray crystallography, were fitted into the cryo-EM reconstructions. This showed that the pentamer of G proteins on each five-fold vertex changes its conformation only slightly during DNA packaging and maturation, whereas major tertiary and quaternary structural changes occur in the F protein. The procapsids and provirions were found to contain 120 copies of the D protein arranged as tetramers on the two-fold axes. DNA might enter procapsids through one of the 30 A diameter holes on the icosahedral three-fold axes. CONCLUSIONS: Combining cryo-EM image reconstruction and X-ray crystallography has revealed the major conformational changes that can occur in viral assembly. The function of the scaffolding proteins may be, in part, to support weak interactions between the structural proteins in the procapsids and to cover surfaces that are subsequently required for subunit-subunit interaction in the virion. The structures presented here are, therefore, analogous to chaperone proteins complexed with folding intermediates of a substrate.

Calcium ion-induced structural changes in bacteriophage phi X174.

Monoclinic P2(1) crystals of the bacteriophage phi X174 have been incubated with calcium ions (Ca2+) and the induced structural conformational changes studied to 3 A resolution with X-ray crystallographic methods. Three different types of Ca2+ binding sites have been located within the asymmetric unit of the virion. Two sets of sites are associated with the F capsid protein. One set of sites associated with the F protein is in a general position near the icosahedral 3-fold axes of the virus, with the main-chain carbonyl oxygen atoms of residues Gly1321, Asp1421, Met1424 and Ser1426, and the side-chains of Gln1004 and Asp1421 as ligands. The other set of sites associated with the F protein is on the icosahedral 3-fold axes, with the symmetry-related main-chain carbonyl oxygen atoms of Ser1001 and the side-chains of Asn1002 as ligands. The bound Ca2+ induce a conformational change of the amino-terminal residues of the F proteins. A third set of sites, consisting of a pair of Ca2+ on the icosahedral 5-fold axes, are associated with the G spike protein and are concurrently liganded by the symmetry-related carbonyl oxygen side-chains of Asp2117. Concomitant with the binding of Ca2+ to the phage is the rotation of the Asp1209 side-chain of the F protein towards some additional electron density that was not observed in the absence of Ca2+. This density is situated in a shallow depression near the icosahedral 2-fold axes of the virus, and has been tentatively interpreted as a bound glucose molecule that is ordered only in the presence of Ca2+. The putative glucose binding site may be related to the attachment of the virus to cell surface lipopolysaccharides in the initial stages of Escherichia coli infection.

Photoelectron imaging of viruses and DNA: evaluation of substrates by unidirectional low angle shadowing and photoemission current measurements.

Photoelectron imaging (photoelectron emission microscopy, PEM or PEEM) is a promising high resolution surface-sensitive technique for biophysical studies. At present, image quality is often limited by the underlying substrate. For photoelectron imaging, the substrate must be electrically conductive, low in electron emission, and relatively flat. A number of conductive substrate materials with relatively low electron emission were examined for surface roughness. Low angle, unidirectional shadowing of the specimens followed by photoelectron microscopy was found to be an effective way to test the quality of substrate surfaces. Optimal results were obtained by depositing approximately 0.1 nm of platinum-palladium (80:20) at an angle of 3 degrees. Among potential substrates for photoelectron imaging, silicon and evaporated chromium surfaces were found to be much smoother than evaporated magnesium fluoride, which initially appeared promising because of its very low electron emission. The best images were obtained with a chromium substrate coated with a thin layer of dextran derivatized with spermidine, which facilitated the spreading and adhesion of biomolecules to the surfaces. Making use of this substrate, improved photoelectron images are reported for tobacco mosaic virus particles and DNA-recA complexes.

Analysis of the single-stranded DNA bacteriophage phi X174, refined at a resolution of 3.0 A.

The structure of the bacteriophage phi X174 was examined in a 2.7 A resolution map and refined, using 6.0 A to 3.0 A resolution data with F > or = 5 sigma (F). The final R-factor was 20.9% and the root-mean-square deviation from idealized bond lengths was 0.021 A. The Hendrickson-Konnert refinement was restrained by the phases derived from the molecular replacement icosahedral averaging procedure. The mature phage capsid consists of 60 copies of the F protein with 426 amino acids, the G protein with 175 amino acids and the J protein with 37 amino acids, as well as 12 copies of the H protein with 328 amino acids. The entire polypeptide chain of the F and G protein, all but the first N-terminal residue of the J protein, and 178 solvent molecules were included in the refinement calculations. The secondary structural features of the F, G and J proteins and their interactions with each other are described. The majority of the protein-protein interactions are between the icosahedral 5-fold related interfaces of the F and of the G proteins. These pentameric units of the F and G proteins form the 9S and 6S assembly intermediates, respectively. The J protein lacks any secondary structure and acts as a linking arm between the icosahedral 5-fold related F proteins. Water molecules were introduced only after phase extension to 2.7 A resolution had been completed. The F protein is associated with lower "thermal" parameters and exhibits greater water order in its environment than the G and J proteins. The largest thermal parameters occur in residues on the viral surface. The solvent contributes to the interactions between the proteins. There is an interface of solvent molecules between the F and the G pentamers which stabilizes the pentameric G protein spikes in a crater centered at each of the icosahedral 5-fold vertices of the F protein capsid. Sequence alignments of the F, G and J amino acid sequences for the homologous bacteriophages G4, alpha 3, phi K and phi X174 with respect to the phi X174 structure demonstrated the conservation of functionally important residues on the viral surface.

Recent advances in atomic force microscopy of DNA.

Three advances involving DNA in atomic force microscopy (AFM) are reported here. First a HEPES-Mg buffer has been used that improves the spreading of DNA and provides good DNA coverage with as little as 200-500 picograms per sample. Second, the new "tapping" mode has been used to improve the ease and resolution of AFM-imaging of DNA in air. Finally, AFM images are presented of single-stranded phi X-174 virion DNA with the gene 32 single-stranded binding protein. A summary of the current state of the field and of the methods for preparing and imaging DNA in the AFM is also presented.

Structure determination of the bacteriophage phiX174.

The structure of the single-stranded DNA phage phiX174 has been determined to 3.4 A resolution. The crystal space group was P2(1) with one icosahedral particle per asymmetric unit, giving 60-fold noncrystallographic redundancy. Oscillation diffraction photographs were collected using synchrotron radiation at various wavelengths. The particle orientations in the unit cell were determined with a rotation function. Because cowpea mosaic virus has a similar external envelope to phiX174, it was used as a search model to find the approximately positions of the phiX174 particles in the unit cell relative to the crystallographic symmetry axes. An initial phase set to 12 A resolution was then based on the cowpea mosaic virus atomic structure. These phases were improved by 20 cycles of real-space molecular replacement averaging. The phase information was gradually extended to 3.4 A resolution by molecular replacement electron density averaging. One reciprocal lattice point was used for each extension followed by four cycles of averaging. The unusual particle capsid, with its 12 pentameric spikes, required the careful determination of a precise molecular envelope. This was redetermined at regular intervals, as was the particle center. The resultant electron density map was readily interpreted in terms of the F, G and J polypeptides in the capsid. A difference electron density map between full and partially empty particles showed some ordered DNA structure.

Atomic force microscopy of single- and double-stranded DNA.

A method has been developed for imaging single-stranded DNA with the atomic force microscope (AFM). phi X174 single-stranded DNA in formaldehyde on mica can be imaged in the AFM under propanol or butanol or in air. Measured lengths of most molecules are on the order of 1 mu, although occasionally more extended molecules with lengths of 1.7 to 1.9 mu are seen. Single-stranded DNA in the AFM generally appears lumpier than double-stranded DNA, even when extended. Images of double-stranded lambda DNA in the AFM show more sharp kinks and bends than are typically observed in the electron microscope. Dense, aggregated fields of double-stranded plasmids can be converted by gentle rinsing with hot water to well spread fields.