Current and Expected Trends for the Marine Chitin/Chitosan and Collagen Value Chains.

Chitin/chitosan and collagen are two of the most important bioactive compounds, with applications in the pharmaceutical, veterinary, nutraceutical, cosmetic, biomaterials, and other industries. When extracted from non-edible parts of fish and shellfish, by-catches, and invasive species, their use contributes to a more sustainable and circular economy. The present article reviews the scientific knowledge and publication trends along the marine chitin/chitosan and collagen value chains and assesses how researchers, industry players, and end-users can bridge the gap between scientific understanding and industrial applications. Overall, research on chitin/chitosan remains focused on the compound itself rather than its market applications. Still, chitin/chitosan use is expected to increase in food and biomedical applications, while that of collagen is expected to increase in biomedical, cosmetic, pharmaceutical, and nutritional applications. Sustainable practices, such as the reuse of waste materials, contribute to strengthen both value chains; the identified weaknesses include the lack of studies considering market trends, social sustainability, and profitability, as well as insufficient examination of intellectual property rights. Government regulations, market demand, consumer preferences, technological advancements, environmental challenges, and legal frameworks play significant roles in shaping both value chains. Addressing these factors is crucial for seizing opportunities, fostering sustainability, complying with regulations, and maintaining competitiveness in these constantly evolving value chains.

Effects of Rice Straw Powder (RSP) Size and Pretreatment on Properties of FDM 3D-Printed RSP/Poly(Lactic Acid) Biocomposites.

To develop a new kind of environment-friendly composite filament for fused deposition modeling (FDM) 3D printing, rice straw powder (RSP)/poly(lactic acid) (PLA) biocomposites were FDM-3D-printed, and the effects of the particle size and pretreatment of RSP on the properties of RSP/PLA biocomposites were investigated. The results indicated that the 120-mesh RSP/PLA biocomposites (named 120#RSP/PLA) showed better performance than RSP/PLA biocomposites prepared with other RSP sizes. Infrared results showed that pretreatment of RSP by different methods was successful, and scanning electron microscopy indicated that composites prepared after pretreatment exhibited good interfacial compatibility due to a preferable binding force between fiber and matrix. When RSP was synergistically pretreated by alkaline and ultrasound, the composite exhibited a high tensile strength, tensile modulus, flexural strength, and flexural modulus of 58.59, 568.68, 90.32, and 3218.12 MPa, respectively, reflecting an increase of 31.19%, 16.48%, 18.75%, and 25.27%, respectively, compared with unmodified 120#RSP/PLA. Pretreatment of RSP also improved the thermal stability and hydrophobic properties, while reducing the water absorption of 120#RSP/PLA. This work is believed to provide highlights of the development of cost-effective biocomposite filaments and improvement of the properties of FDM parts.

The sustainability of microbial bioplastics, production and applications.

Plastic accumulation has destructive environmental impacts, so the world needs eco-friendly plastic alternatives. Within this context, polyhydroxyalkanoates (PHAs) appear to be real alternatives to the chemical plastics because they are biocompatible and biodegradable. Despite its similar properties to common plastics, PHAs use is still hampered by higher production costs. PHAs are produced by high density fed-batch cultivation, activated sludge, microbial consortia and continuous substrate supply, and a major cost associated with their production is the carbon source used for bacterial fermentation. Therefore, novel carbon sources have been studied for PHA production including, macro algae, peanut oil, crude glycerol and whey. PHAs were applied in myriad fields such as wood production, food packaging, 3D painting, cancer detection, treating ulcers as well as several agricultural and therapeutic applications. In this review, current knowledge of methods and novel carbon sources enhance the sustainability and reliability of PHAs in the prospective future.

Surgical applications of intracorporal tissue adhesive agents: current evidence and future development.

Introduction: Traditional mechanical closure techniques pose many challenges including the risk of infection, tissue reaction, and injury to both patients and clinicians. There is an urgent need to develop tissue adhesive agents to reform closure technique. This review examined a variety of tissue adhesive agents available in the market in an attempt to gain a better understanding of intracorporal tissue adhesive agents as medical devices.Areas covered: Fundamental principles and clinical determinants of the tissue adhesives were summarized. The available tissue adhesives for intracorporal use and their relevant clinical evidence were then presented. Lastly, the perspective of future development for intracorporal tissue adhesive were discussed. Clinical evidence shows current agents are efficacious as adjunctive measures to mechanical closure and these agents have been trialed outside of clinical indications with varied results.Expert opinion: Despite some advancements in the development of tissue adhesives, there is still a demand to develop novel technologies in order to address unmet clinical needs, including low tensile strength in wet conditions, non-controllable polimerization and sub-optimal biocompatibility. Research trends focus on producing novel adhesive agents to remit these challenges. Examples include the development of biomimetic adhesives, externally activated adhesives, and multiple crosslinking strategies. Economic feasibility and biosafety are limiting factors for clinical implementation.

Value Improvement and Resource Utilization in Complex Abdominal Wall Reconstruction.

Although recommendations help guide surgeons' mesh choice in abdominal wall reconstruction (AWR), financial and institutional pressures may play a bigger role. Standardization of an AWR algorithm may help reduce costs and change mesh preferences. We performed a retrospective review of high- and low-risk patients who underwent inpatient AWR between 2014 and 2016. High risk was defined as immunosuppression and/or history of infection/contamination. Patients were stratified by the type of mesh as biologic/biosynthetic or synthetic. These cohorts were analyzed for outcome, complications, and cost. One hundred twelve patients underwent complex AWR. The recurrence rate at two years was not statistically different between high- and low-risk cohorts. No significant difference was found in the recurrence rate between biologic and synthetic meshes when comparing both high- and low-risk cohorts. The average cost of biologic mesh was $9,414.80 versus $524.60 for synthetic. The estimated cost saved when using synthetic mesh for low-risk patients was $295,391.20. In conclusion, recurrence rates for complex AWR seem to be unrelated to mesh selection. There seems to be an excess use of biologic mesh in low-risk patients, adding significant cost. Implementing a critical process to evaluate indications for biologic mesh use could decrease costs without impacting the quality of care, thus improving the overall value of AWR.

Development of Sustainable and Cost-Competitive Injection-Molded Pieces of Partially Bio-Based Polyethylene Terephthalate through the Valorization of Cotton Textile Waste.

This study presents the valorization of cotton waste from the textile industry for the development of sustainable and cost-competitive biopolymer composites. The as-received linter of recycled cotton was first chopped to obtain short fibers, called recycled cotton fibers (RCFs), which were thereafter melt-compounded in a twin-screw extruder with partially bio-based polyethylene terephthalate (bio-PET) and shaped into pieces by injection molding. It was observed that the incorporation of RCF, in the 1⁻10 wt% range, successfully increased rigidity and hardness of bio-PET. However, particularly at the highest fiber contents, the ductility and toughness of the pieces were considerably impaired due to the poor interfacial adhesion of the fibers to the biopolyester matrix. Interestingly, RCF acted as an effective nucleating agent for the bio-PET crystallization and it also increased thermal resistance. In addition, the overall dimensional stability of the pieces was improved as a function of the fiber loading. Therefore, bio-PET pieces containing 3⁻5 wt% RCF presented very balanced properties in terms of mechanical strength, toughness, and thermal resistance. The resultant biopolymer composite pieces can be of interest in rigid food packaging and related applications, contributing positively to the optimization of the integrated biorefinery system design and also to the valorization of textile wastes.

Biocompatibility of new low-cost (α + ß)-type Ti-Mo-Fe alloys for long-term implantation.

In this work, two new α +â€¯ß titanium alloys with low contents of ubiquitous and low-cost alloying elements (i.e., Mo and Fe) were designed on the basis of the electronic parameters and molybdenum equivalent approaches. The designed Ti - 2Mo - 0.5Fe at. % (TMF6) and Ti - 3Mo - 0.5Fe at. % (TMF8) alloys were produced using arc melting process for studying their mechanical, electrochemical and cytotoxicity compatibilities and comparing these compatibilities to those of Ti-6Al-4V ELI alloy. The cost of the used raw materials for producing the TMF6 and TMF8 alloys are almost 1/6 of those for producing the Ti-6Al-4V ELI alloy. The hardness of the two alloys are higher than that of the Ti-6Al-4V ELI alloy, while their Young's moduli (in the range of 85-82 GPa) are lower than that of the Ti-6Al-4V ELI alloy (110 GPa). Increasing the Mo equivalent from 6 (in TMF6 alloy) to 8 (in TMF8 alloy) led to an increase in the plastic strain percent from 4% to 17%, respectively, and a decrease in the ultimate tensile strength from 949 MPa to 800 MPa, respectively. The microstructure of TMF6 alloy consists of α'/α″ phases, while TMF8 alloy substantially consists of α″ phase. The corrosion current densities and the film resistances of the new alloys are in the range of 0.70-1.07 nA/cm2 and on the order of 105â€¯Ω·cm2, respectively. These values are more compatible with biomedical applications than those measured for the Ti-6Al-4V ELI alloy. Furthermore, the cell viabilities of the TMF6 and TMF8 alloys indicate their improved compatibility compared to that of the Ti-6Al-4V ELI alloy. The CCK-8 (Cell Counting Kit-8) assay was conducted to investigate the cytotoxicity, proliferation, and shape index of the cells of the candidate alloys. Overall, the measured compatibility of the new V-free low-cost alloys, particularly TMF8, makes them promising candidates for replacing the Ti-6Al-4V ELI alloy in biomedical applications.

Polymethyl Methacrylate in Patient-Specific Implants: Description of a New Three-Dimension Technique.

Polymethyl methacrylate (PMMA), an easily moldable and economical synthetic resin, has been used since the 1940s. In addition, PMMA has good mechanical properties and is one of the most biocompatible alloplastic materials currently available. The PMMA can serve as a spacer and as a delivery vehicle for antibiotics. Prior studies have indicated that no significant differences in infection rates exist between autologous and acrylic cranioplasty. Although inexpensive, the free-hand cranioplasty technique often yields unsatisfactory cosmetic results. In the present study, the application of a recently developed, economic modality for the perioperative application, and molding of PMMA to ensure a precise fit in 16 patients using computer-aided design, computer-aided manufacturing, and rapid prototyping was described.The mean defect size was 102.0 ±â€Š26.4 cm. The mean volume of PMMA required to perform the cranioplasty procedure was 51 mL. The cost of PMMA was approximately 6 Euro (&OV0556;) per mL. The costs of fabricating the implants varied from 119.8 &OV0556; to 1632.0 &OV0556; with a mean of 326.4 &OV0556; ±â€Š371.6. None of the implants required removal during the follow-up period.

Budget impact analysis of demineralized bone matrix in combination with autograft in lumbar spinal fusion procedures for the treatment of lumbar degenerative disc disease in Spain.

OBJECTIVE: To estimate the budget impact (BI) of introducing local autograft (LA) combined with demineralized bone matrix (LA + DBM) in lumbar spinal fusion (LSF) procedures to treat lumbar degenerative disc disease (LDDD) in Spain. METHODS: A decision tree model was developed to evaluate the 4-year BI associated with introducing LA + DBM putty to replace currently available grafting methods, including iliac crest bone graft (ICBG), LA alone, and LA combined with beta-tricalcium phosphate (LA + ceramics), with 30%, 40%, and 30% market shares, respectively. The analysis was conducted for a hypothetical cohort of 100 patients with LDDD receiving LSF, assuming LA + DBM would replace 100% of the standard of care mix. The fusion rates extracted from the literature were validated by an expert panel. Costs (€2017) were obtained from different Spanish sources. Budget impact and incremental cost per successful fusion were calculated from the perspective of the Spanish National Health System (NHS). RESULTS: Over 4 years, replacing currently available options with LA + DBM for 100 patients resulted in an additional cost of €12,330 (€123/patient), and an additional 14 successful fusions, implying a cost of €881 per additional successful fusion. When costs of productivity loss were included, the introduction of LA + DBM resulted in cost savings of €70,294 (€703/patient). LIMITATIONS: The lack of high-quality, homogeneous, head-to-head research studying the efficacy of grafting procedures available to patients undergoing LSF, in addition to a lack of long-term follow-up in existing studies. Therefore, the number of fusions occurring within the model's time horizon may be underestimated. CONCLUSIONS: Acquisition costs of DBM were partially offset by costs of failed fusions, adverse events and reoperation when switching 100 hypothetical LDDD patients undergoing LSF procedures from standard of care grafting methods to LA + DBM from the perspective of the Spanish NHS. DBM cost was entirely offset when costs of lost productivity were considered.

Biologic mesh in ventral hernia repair: Outcomes, recurrence, and charge analysis.

BACKGROUND: Biologic mesh choice in ventral hernia repair is challenging due to lack of prospective data. This study examines long-term, single-center biologic mesh outcomes. METHODS: Prospective operative outcomes data was queried for open ventral hernia repair with biologic mesh. Univariate and multivariate analysis were used to compare mesh outcomes. RESULTS: In the study, 223 patients underwent open ventral hernia repair with biologic mesh, including 40 with Alloderm, 23 AlloMax, 70 FlexHD, 68 Strattice, and 22 Xenmatrix. Overall, 9.8% had an American Society of Anesthesiology classification of 4, 54.6% with a classification of 3, and 35.6% with a classification of 1 or 2. Operative time averaged 241 minutes with estimated blood loss of 202 mL. Hernia defects averaged 257 ± 245 cm2 with mesh size 384 cm2. Biologic mesh was used as a fascial bridge in 19.6%, component separation was performed in 47.5%, and 82% had concomitant procedure. Inpatient mortality was 1.4%. Hernia recurrence varied significantly by mesh type: 35% Alloderm, 34.5% AlloMax, 37.1% FlexHD, 14.7% Strattice, and 59.1% Xenmatrix (P = .001). The mean follow-up was 18.2 months. After multivariate analysis comparing to Strattice, AlloMax had a 3.4 higher odds ratio for recurrence, FlexHD a 2.9 odds ratio, and Xenmatrix a 7.8 odds ratio. The rate of mesh infections requiring explantation was <1%. Total hospital charges averaged $131,004 ± $143,320. Mean charges varied significantly between meshes; Xenmatrix was the most expensive and AlloMax was the least expensive (P < .05). CONCLUSION: In 223 ventral hernia repair performed with biologic mesh at a tertiary care institution, Strattice, a porcine acellular dermal mesh, had significantly lower odds of hernia recurrence compared with AlloMax, FlexHD, and Xenmatrix. Choice of biologic mesh affects long-term postoperative outcomes in ventral hernia repair.

Comparison of dextranomer/hyaluronic acid based bulking agents in the treatment of vesicoureteral reflux in children: Deflux versus Vurdex.

INTRODUCTION: The objective of this study was to compare the clinical efficacy of two similar tissue bulking agents, Deflux and Vurdex, used for a treatment of vesicoureteral reflux (VUR) in our institution. MATERIAL AND METHODS: The case records of 104 children, treated endoscopically for primary VUR from January 2010 to January 2015, were retrospectively reviewed. Most of the patients were treated with Deflux until 2012, when use of Vurdex was started. Exclusion criteria were patients with secondary reflux due to neurogenic bladder, duplicated refluxing ureters, primarily operated patients and patients operated after first or second injection. RESULTS: Endoscopic treatment of vesicoureteral reflux using Deflux was performed in 65 children (106 ureters). There were 24 patients with unilateral and 41 patients with bilateral VUR. After first injection of Deflux success was achieved in 74 ureters (69.8%), after second injection in 91 ureters (85.8%) and after third injection in 99 ureters (93.3%). The same procedure using Vurdex was performed in 39 children (58 ureters). There were 20 patients with unilateral and 19 patients with bilateral reflux. After first injection of Vurdex success was achieved in 43 ureters (74.1%), after second injection in 52 ureters (89.6%) and after third injection in 55 ureters (94.8%). CONCLUSIONS: Overall success rate for patients treated with Deflux was 93.3% and for patients treated with Vurdex 94.8%. No significant difference in success rates between two groups was found (p = 0.714). However, Vurdex has an advantage because of the significantly lower price, but with same treatment results as Deflux.

Economics of All-Polyethylene Versus Metal-Backed Tibial Prosthesis Designs.

With the large number of total knee arthroplasties being performed and expectations that these numbers will be on the rise over the coming decades, efforts to provide cost-efficient care are of greater interest. The preferred design of knee arthroplasty implants has changed over time, with the original all-polyethylene tibial (APT) design being replaced by metal-backed tibial (MBT) components, as well as more recent considerations of newer APT designs. Modern APT components have been shown to have similar or superior outcomes than MBT components. Despite their limitations, APT components can be used to reduce the economic burden to the provider, medical institution, and health care system as a whole. There is a paucity of evidence-based literature directly comparing the cost associated with APT and MBT components. The purpose of this report is to review the literature to assess the available data regarding direct and indirect costs of both designs so that orthopedic surgeons can account for economic differences in everyday practice. [Orthopedics. 2016; 39(3):S61-S66.].

IR-Live: fabrication of a low-cost plastic microfluidic device for infrared spectromicroscopy of living cells.

Water is a strong mid-infrared absorber, which has hindered the full exploitation of label-free and non-invasive infrared (IR) spectromicroscopy techniques for the study of living biological samples. To overcome this barrier, many researchers have built sophisticated fluidic chambers or microfluidic chips wherein the depth of the liquid medium in the sample compartment is limited to 10 µm or less. Here we report an innovative and simple way to fabricate plastic devices with infrared transparent view-ports enabling infrared spectromicroscopy of living biological samples; therefore the device is named "IR-Live". Advantages of this approach include lower production costs, a minimal need to access a micro-fabrication facility, and unlimited mass or waste exchange for the living samples surrounding the view-port area. We demonstrate that the low-cost IR-Live in combination with microfluidic perfusion techniques enables long term (>60 h) cell culture, which broadens the capability of IR spectromicroscopy for studying living biological samples. To illustrate this, we first applied the device to study protein and lipid polarity in migrating REF52 fibroblasts by collecting 2-dimensional spectral chemical maps at a micrometer spatial resolution. Then, we demonstrated the suitability of our approach to study dynamic cellular events by collecting a time series of spectral maps of U937 monocytes during the early stage of cell attachment to a bio-compatible surface.

Biomaterials use in Mulago National Referral Hospital in Kampala, Uganda: Access and affordability.

Students in Biomaterials BBE3102 at Makerere University in Kampala, Uganda were assigned semester long group projects in the first semester of the 2014-15 academic year to determine the biomaterials type and usage in Mulago National Referral Hospital, which is emblematic of large public hospitals across East Africa. Information gathering was conducted through student interviews with Mulago physicians because there were no archival records. The students divided themselves into seven project groups covering biomaterials use in the areas of wound closure, dental and oral surgery, cardiology, burn care, bone repair, ophthalmology and total joint replacement. As in the developed world, the majority of biomaterials used in Mulago are basic wound closure materials, dental materials, and bone fixation materials, all of which are comparatively inexpensive, easy to store, and readily available from either the government or local suppliers; however, there were significant issues with the implant supply chain, affordability, and patient compliance and follow-up in cases where specialty expertise and expensive implants were employed.

Segmental Mirroring: Does It Eliminate the Need for Intraoperative Readjustment of the Virtually Pre-Bent Reconstruction Plates and Is It Economically Valuable?

PURPOSE: The aim of this study was to compare segmental mirroring with mirroring of the entire unaffected side to determine which method obviates intraoperative readjustment of virtually planned pre-bent plates and to evaluate the effect on costs. MATERIALS AND METHODS: Patients eligible for inclusion in this prospective study had unilateral mandibular discontinuity defects. Patients were randomly divided into 2 groups. In group I, models were constructed by mirroring the entire unaffected side of the mandible at the midsagittal plane. In group II, only the resected segments were cut and replaced by the corresponding mirrored healthy segments. The lesions were resected, and their sites were reconstructed using pre-bent reconstruction plates. The need for intraoperative plate readjustment, plate placement time, operation time, and operation costs were reviewed. RESULTS: Fifty patients were enrolled in this study. All but 5 plates in group I required readjustment. In group II, plates were placed without intraoperative handling. Average operating times were 4.20 ± 0.56 hours in group I and 3.186 ± 0.28 hours in group II (P = .00002). Mean times for plate placement were 33.36 ± 8.20 and 21.88 ± 5.73 minutes in groups I and II, respectively. The difference resulted in an average time gain of 11.48 minutes. Average personal costs per minute were US$740.77 for group I and US$560.87 for group II. The difference resulted in an average saving of approximately US$179.90. CONCLUSION: Segmental mirroring is superior in reflecting the bone anatomy in 3-dimensional models, thus eliminating intraoperative plate readjustment and providing better plate adaptation with better contour. It decreases operating time and costs and thus can be recommended for lesions that do not cross the midline.

Rapid prototyping-assisted maxillofacial reconstruction.

Rapid prototyping (RP) technologies have found many uses in dentistry, and especially oral and maxillofacial surgery, due to its ability to promote product development while at the same time reducing cost and depositing a part of any degree of complexity theoretically. This paper provides an overview of RP technologies for maxillofacial reconstruction covering both fundamentals and applications of the technologies. Key fundamentals of RP technologies involving the history, characteristics, and principles are reviewed. A number of RP applications to the main fields of oral and maxillofacial surgery, including restoration of maxillofacial deformities and defects, reduction of functional bone tissues, correction of dento-maxillofacial deformities, and fabrication of maxillofacial prostheses, are discussed. The most remarkable challenges for development of RP-assisted maxillofacial surgery and promising solutions are also elaborated.

Economic evaluation of neutral-pH, low-glucose degradation product peritoneal dialysis solutions compared with standard solutions: a secondary analysis of the balANZ Trial.

BACKGROUND: Biocompatible solutions may lower peritonitis rates, but are more costly than conventional solutions. The aim of the present study was to assess the additional costs and health outcomes of biocompatible over conventional solutions in incident peritoneal dialysis patients to guide practice decisions. STUDY DESIGN: Secondary economic evaluation of a randomized controlled trial. SETTING & POPULATION: 185 participants in the balANZ trial. MODEL, PERSPECTIVE, & TIMEFRAME: Cost-effectiveness of biocompatible compared to standard solution over the 2 years using an Australian health care funder perspective. INTERVENTION: Intervention group received biocompatible solutions and control group received standard solutions over 2 years. OUTCOMES: Costs included dialysis charges, costs of treating peritonitis, non-peritonitis-related hospital stays, and medication. Peritonitis was the health outcome of interest; incremental cost-effectiveness ratios were reported in terms of the additional cost per additional patient avoiding peritonitis at 2 years. RESULTS: Mean total per-patient costs were A$57,451 and A$53,930 for the biocompatible and standard-solution groups, respectively. The base-case analysis indicated an incremental cost of A$17,804 per additional patient avoiding peritonitis at 2 years for biocompatible compared to standard solution. In a sensitivity analysis excluding extreme outliers for non-peritonitis-related hospitalizations, mean per-patient costs were A$49,159 and A$52,009 for the biocompatible and standard-solution groups, respectively. Consequently, the incremental cost-effectiveness ratio also was reduced significantly: biocompatible solution became both less costly and more effective than standard solution and, in economic terms, was dominant over standard solution. LIMITATIONS: Peritonitis was a secondary outcome of the balANZ trial. Health outcomes measured only in terms of patients avoiding peritonitis over 2 years may underestimate the longer term benefits (eg, prolonged technique survival). CONCLUSIONS: Biocompatible dialysis solutions may offer a cost-effective alternative to standard solutions for peritoneal dialysis patients. Reductions in peritonitis-related hospital costs may offset the higher costs of biocompatible solution.

Cost utility analysis of urethral bulking agents versus midurethral sling in stress urinary incontinence.

OBJECTIVE: The aim of this study was to determine the cost utility of urethral bulking agents (BA) compared with midurethral slings (MUS) in the treatment of stress urinary incontinence (SUI) in patients without urethral hypermobility. METHODS: A decision tree was constructed to compare the cost utility of urethral BA versus MUS in the setting of SUI without urethral hypermobility. Probability estimates for success, failure, and complications were obtained from the published literature. Immediate-term, short-term, and longer-term complications were accounted for over a 1-year time horizon in the model. One-way and 2-way sensitivity analyses and Monte Carlo simulations were performed to assess the robustness of our results. RESULTS: Our model demonstrated that MUS cost $436,465 more than BA for every 100 women treated in 1 year. Using MUS compared with BA leads to an incremental cost-effectiveness ratio of $70,400 per utility gained. Assuming a willingness to pay of $50,000, this makes MUS not cost-effective as a first-line treatment in many situations. When MUS costs less than $5132, it becomes a cost-effective first-line treatment, and when it costs less than $2035, it is cost saving. CONCLUSIONS: Bulking agents are more cost-effective than MUS over a 1-year time horizon in the treatment of SUI in patients without urethral hypermobility. In women who lack urethral hypermobility, BA remain a cost-effective option in this patient population.

PAMAM dendrimers: destined for success or doomed to fail? Plain and modified PAMAM dendrimers in the context of biomedical applications.

PAMAM (polyamidoamine) dendrimers are commonly considered promising polymers that can be successfully used in various biomedical applications. Nevertheless, direct clinical adaptations of plain unmodified PAMAM dendrimers may be limited at present, mainly because of their toxicity, unpredictable behavior in living organisms, unknown bioavailability, biocompatibility or pharmacokinetic profile, problematic therapeutic dose selection, or high cost of production. On the basis of our studies concerning the possible use of unmodified PAMAM dendrimers as the scavengers of glucose and carbonyl stress in animal models of human pathology, as well as considering available literature on experimental data of other researchers, we have prepared the brief critical review of the biomedical activities of these unmodified compounds and their most alluring derivatives, especially in the context of possible future perspectives of PAMAMs. Thus, on the pages of this review, we made an attempt to briefly summarize obstacles, emerging from experimental, technical, and human limitations, that may, to some extent, restrain our belief in a brighter future of plain amine-terminated PAMAM dendrimers.