Waste from the food industry: Innovations in biorefineries for sustainable use of resources and generation of value.

Biorefineries have attracted significant attention from the scientific community and various industrial sectors due to their use of unconventional biomass sources to produce biofuels and other value-added compounds. Various agro-industrial residues can be applied in biorefinery systems, making them economically and environmentally attractive. However, the cost, efficiency, and profitability of the process are directly affected by the choice of biomass, pre-treatments, and desired products. In biorefineries, the simultaneous production of different products during processing is a valuable approach. Chemical, physical, biological, or combined treatments can generate numerous compounds of high commercial interest, such as phenolic compounds. These treatments, in addition to modifying the biomass structure, are essential for the process's viability. Over the years, complex treatments with high costs and environmental impacts have been simplified and improved, becoming more specific in generating high-value resources as secondary outputs to the main process (generally related to the release of sugars from lignocelluloses to produce second-generation ethanol). Innovative methods involving microorganisms and enzymes are the most promising in terms of efficiency and lower environmental impact. Biorefineries enable the use of varied raw materials, such as different agro-industrial residues, allowing for more efficient resource utilization and reducing dependence on non-renewable sources. In addition to producing low-carbon biofuels, biorefineries generate a variety of high-value by-products, such as packaging materials, pharmaceuticals, and nutritional ingredients. This not only increases the profitability of biorefineries but also contributes to a circular economy.

Pyrolysis and Physicochemical, Thermokinetic and Thermodynamic Analyses of Ceiba aesculifolia (Kunth) Britt and Baker Waste to Evaluate Its Bioenergy Potential.

Ceiba aesculifolia is an important species in Mexico that generates significant amounts of biomass waste during its exploitation, which can be utilized to produce energy. This study presents the characterization of this waste based on chemical (proximal and elemental) and thermal analyses (TGA-DTG) at different heating rates (ß = 10-30 °C/min (283-303 K/min)) in the presence of nitrogen and in a temperature range of 25-900 °C. Kinetic parameters were calculated and analyzed as well. Activation energy (Ea) and the pre-exponential factor (A) were determined using the Friedman (132.03 kJ/mol, 8.11E + 10 s -1), FWO (121.65 kJ/mol, 4.30E + 09), KAS (118.14 kJ/mol, 2.41E + 09), and Kissinger (155.85 kJ/mol, 3.47E + 11) kinetic methods. Variation in the reaction order, n (0.3937-0.6141), was obtained by Avrami's theory. We also calculated the thermodynamic parameters (ΔH, ΔG, ΔS) for each kinetic method applied. The results for Ea, A, n, ΔH, ΔG, and ΔS show that this biomass waste is apt for use in pyrolysis. Moreover, the moisture (<10%), ash (<2%), volatile material (>80%), and HHV (>19%) contents of C. aesculifolia allowed us to predict acceptable performance in generating energy and fuels. Finally, infrared spectroscopy analysis (FT-IR) allowed us to identify important functional groups, including one that belongs to the family of the aliphatic hydrocarbons.

Pollution control and biodiesel production with microalgae: new perspectives on the use of flat panel photobioreactors regarding variation in volume application rate.

In the present study, the microalga Arthrospira platensis DHR 20 was cultivated in vertical flat-plate photobioreactors (FPBRs) to bioremediate anaerobically digested cattle wastewater (ACWW) and used as a growth substrate. The final objective was to evaluate the properties of the oil extracted from this biomass to determine its potential for biodiesel production. The process was divided into five phases, varying the volume of the applied substrate: 1 L (Phase I), 5 L (Phase II), 10 L (Phase III), 15 L (Phase IV), and 20 L (Phase V). Dry biomass reached a maximum of 5.7 g L-1, and productivity peaked at 0.74 g L-1d-1. The highest rate of CO2 biofixation was 1213.5 mg L-1 day-1, showing good potential for purifying the air. The highest specific maximum growth rate (µmax) and the shortest doubling time (Dt) were found during Phase I. The removal of pollutants and nutrients during the experimental phases ranged from 65.8% to 87.1% for chemical oxygen demand (COD), 82.2% to 85.8% for total organic carbon (TOC), 91% to 99% for phosphate (PO43-), 62.5% to 93% for nitrate (NO3-), 90.4% to 99.7% for ammoniacal nitrogen (NH4+), and 86.5% to 98.5% for total nitrogen (TN). The highest lipid production recorded was 0.172 g L-1 day-1. The average cetane number recorded in Phase IV of 51 suggests that the fuel will ignite efficiently and consistently, providing smooth operation and potentially reducing pollutant emissions. The analysis of fatty acids revealed that the produced biodiesel has the potential to be used as an additive for other low-explosive biocombustibles, representing an innovative and sustainable approach that simultaneously offers bioremediation and carbon sequestration.

Performance of grazing cows fed supplements from coproducts of biodiesel industry replacing soybean meal.

The objective of the present study was to evaluate the substitution of soybean meals by biodiesel co-products on the performance and nutrient balance of lactating cows on pasture. Twelve dairy cows (7/8 Holstein-Gir) in early lactation were included in this feeding trial. These animals had an average daily milk yield of 21.1 kg and were distributed in a 4 × 4 triple Latin square experimental design. Protein supplements fed to these lactating cows contained peanut meal, cotton and sunflower as a complete replacement for soybean meal. Nutrient intake and digestibility, milk production, microbial protein synthesis, energy and protein balance were the parameters assessed in this study. Supplements containing different biodiesel co-products did not influence (P > 0.05) the level of forage intake, supplementation and nutrient by lactating cows, except for the total digestible nutrients (TDN) intake which was higher (P ≤ 0.05) in cows supplemented with cottonseed meal. The cotton meal also promoted higher digestibility of TDN (P = 0.001) and total carbohydrates (TCHO; P = 0.001) of the diet and, as a result, higher energy consumption (P = 0.01) and lower negative energy balance (P = 0.01). Cottonseed meal is a co-product of the biodiesel industry that has the ability to replace soybean meal as a source of protein in the supplement without affecting performance and promoting greater energy availability, demonstrating its ability to reduce the effects of negative energy balance in cows at the beginning of lactation kept on tropical pastures.

Enzymatic approaches for diversifying bioproducts from cellulosic biomass.

Cellulosic biomass is the most abundantly available natural carbon-based renewable resource on Earth. Its widespread availability, combined with rising awareness, evolving policies, and changing regulations supporting sustainable practices, has propelled its role as a crucial renewable feedstock to meet the escalating demand for eco-friendly and renewable materials, chemicals, and fuels. Initially, biorefinery models using cellulosic biomass had focused on single-product platform, primarily monomeric sugars for biofuel. However, since the launch of the first pioneering cellulosic plants in 2014, these models have undergone significant revisions to adapt their biomass upgrading strategy. These changes aim to diversify the bioproduct portfolio and improve the revenue streams of cellulosic biomass biorefineries. Within this area of research and development, enzyme-based technologies can play a significant role by contributing to eco-design in producing and creating innovative bioproducts. This Feature Article highlights our strategies and recent progress in utilizing the biological diversity and inherent selectivity of enzymes to develop and continuously optimize sustainable enzyme-based technologies with distinct application approaches. We have advanced technologies for standalone platforms, which produce various forms of cellulose nanomaterials engineered with customized and enhanced properties and high yields. Additionally, we have tailored technologies for integration within a biorefinery concept. This biorefinery approach prioritizes designing tailored processes to establish bionanomaterials, such as cellulose and lignin nanoparticles, and bioactive molecules as part of a new multi-bioproduct platform for cellulosic biomass biorefineries. These innovations expand the range of bioproducts that can be produced from cellulosic biomass, transcending the conventional focus on monomeric sugars for biofuel production to include biomaterials biorefinery. This shift thereby contributes to strengthening the Bioeconomy strategy and supporting the achievement of several Sustainable Development Goals (SDGs) of the 2030 Agenda for Sustainable Development.

Unlocking pilot-scale green diesel production from microalgae.

Microalgae have emerged as a promising source of biomass to produce renewable biofuels due to their ability to synthesize high-energy density compounds of commercial interest. This study proposes an approach for pilot-scale oil extraction, purification by fractional distillation, hydrocarbon characterization by gas chromatography coupled to mass spectrometry (GC-MS), evaluation of physicochemical parameters of the produced hydrocarbons, preliminary cost analysis, and challenges and future opportunities for green diesel on a commercial scale. Here, the microalgae Tetradesmus obliquus was cultivated in 12 m³ photobioreactors using biodigested swine waste as a culture medium. The resulting biomass was subjected to drying and harvesting, followed by oil extraction using a hot solvent extraction method, followed by distillation to purify the compounds. Three different extraction and distillation experiments were conducted, each using different solvent combinations. The results obtained revealed that extraction with a solvent blend, composed of hexane and ethanol, provided more significant yields compared to extraction with pure hexane. GC-MS analysis showed the presence of alkanes and alkenes in the oil samples, and the proportion of solvent used in the extraction directly influenced the production of alkanes. Additionally, specific hydrocarbons such as 4-methyl-1-decene, 8-heptadecene, 1-pentadecene, 9-heneicosene, and 2-dodecene were identified. The evaluation of the physicochemical parameters demonstrated that the calorific value of the distilled oil samples is within the range of typical values for petroleum diesel. However, it was observed that the distilled oil samples had higher sulfur content compared to conventional diesel. Regarding the cost analysis, it was found that it varies depending on the experimental conditions. In particular, the process using a solvent mixture of 70% hexane and 30% ethanol proved to be more economical than the others, since it extracted a greater quantity of oil with a lower initial biomass requirement. In summary, this microalgae-derived hydrocarbon production process is promising and offers insights for compound purification and future biofuel applications.

Fungal Laccases and Fumonisin Decontamination in Co-Products of Bioethanol from Maize.

Maize (Zea mays L.) may be infected by Fusarium verticillioides and F. proliferatum, and consequently contaminated with fumonisins (FBs), as well as the co-products of bioethanol intended for animal feed. Laccase enzymes have a wide industrial application such as mycotoxin degradation. The aims were to isolate and identify fungal laccase-producing strains, to evaluate laccase production, to determine the enzymatic stability under fermentation conditions, and to analyse the effectiveness in vitro of enzymatic extracts (EEs) containing laccases in degrading FB1. Strains belonging to Funalia trogii, Phellinus tuberculosus, Pleurotus ostreatus, Pycnoporus sanguineus and Trametes gallica species showed laccase activity. Different isoforms of laccases were detected depending on the evaluated species. For the FB1 decontamination assays, four enzymatic activities (5, 10, 15 and 20 U/mL) were tested, in the absence and presence of vanillic acid (VA) and 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO) as redox mediators (1 and 10 mM). Trametes gallica B4-IMICO-RC EE was the most effective strain in buffer, achieving a 60% of FB1 reduction. Laccases included in EEs remained stable at different alcoholic degrees in maize steep liquor (MSL), but no significant FB1 reduction was observed under the conditions evaluated using MSL. This study demonstrate that although laccases could be good candidates for the development of a strategy to reduce FB1, further studies are necessary to optimise this process in MSL.

Use of Residual Lignocellulosic Biomass and Algal Biomass to Produce Biofuels.

Efforts are intensifying to identify new biofuel sources in response to the pressing need to mitigate environmental pollutants, such as greenhouse gases, which are key contributors to global warming and various worldwide calamities. Algae and microalgae present themselves as excellent alternatives for solid-gaseous fuel production, given their renewable nature and non-polluting characteristics. However, making biomass production from these organisms economically feasible remains a challenge. This article collates various studies on the use of lignocellulosic waste, transforming it from environmental waste to valuable organic supplements for algae and microalgae cultivation. The focus is on enhancing biomass production and the metabolites derived from these biomasses.

Optimization of enzymatic hydrolysis of cellulose extracted from bamboo culm for bioethanol production by Saccharomyces cerevisiae modified via CRISPR/Cas9.

In the context of biorefinery, researchers have been looking for lignocellulosic biomasses and ideal treatments to produce economically viable biofuels. In this scenario, the bamboo culm appears as a plant matrix of great potential, given the high cellulose content of low crystallinity. Thus, the objective and differential of this work was to determine the best conditions for enzymatic hydrolysis of cellulose extracted from bamboo culm and to evaluate its potential application in the production of bioethanol through Separate Hydrolysis and Fermentation (SHF) and Saccharification and Simultaneous Fermentation (SSF) by Saccharomyces cerevisiae modified via CRISPR/Cas9. The average cellulose extraction yield was 41.87 % with an extraction efficiency of 86.76 %. In general, as the hydrolysis time increased, an increase in glucose production was observed in almost all assays, with higher hydrolysis efficiency values at 72 h. The results ranged from 2.09 to 19.8 g/L of glucose obtained with efficiency values of 10.47 to 99 %. The best conditions were found in test 5 (temperature of 36 °C and pH 5.0, with only 10 FPU/g of substrate Cellic Ctec2 Novozymes ® cocktail). It is observed that for all hydrolysis times the independent variables pH and temperature were significant under the hydrolysis efficiency, showing a negative effect, indicating that higher values of the same promote lower values of the response variable. For bioethanol production, a maximum concentration of 7.84 g/L was observed for the SSH process after 4 h of fermentation, while for the SSF process it was 12.6 g/L after 24 h of fermentation, indicating the large potential of the simultaneous process together with the application of bamboo culm biomass for high production of biofuel.

Efficient PAHs removal and CO2 fixation by marine microalgae in wastewater using an airlift photobioreactor for biofuel production.

Microalgae cultures have emerged as a promising strategy in diverse areas, ranging from wastewater treatment to biofuel production, thus contributing to the search for carbon neutrality. These photosynthetic organisms can utilize the resources present in wastewater and fix atmospheric CO2 to produce biomass with high energy potential. In this study, the removal efficiency of Polycyclic Aromatic Hydrocarbons (PAHs), CO2 fixation and lipid content in the biomass produced from microalgae grown in airlift photobioreactor were evaluated. Four mesoscale cultures were carried out: Control (Seawater + Conway medium), Treatment A (Oil Produced Water + Poultry Effluent Water), Treatment B (Poultry Effluent Water + Seawater) and Treatment C (Oil Produced Water, Seawater and nutrients). The impact of biostimulation, through the addition of nutrients, on PAHs removal efficiency (up to 90%), CO2 fixation rate (up to 0.20 g L-1 d-1) and the composition of the generated biomass was observed. Primarily, the addition of nitrates to the culture medium impacted CO2 fixation rate of the microalgae. In addition, a direct correlation was observed between PAHs removal and lipid accumulation in the biomass, up to 36% in dry weight, demonstrating microalgae's ability to take advantage of the organic carbon (PAHs) present in the culture medium to generate lipid-rich biomass. The concentration of polysaccharides in the biomass obtained did not exceed 12% on a dry weight basis, and the Higher Heating Value (HHV) ranged between 17 and 21 MJ kg-1. Finally, the potential of generating hydrogen through pyrolysis was highlighted, taking advantage of the characteristics of biomass as a conversion route to produce biofuels. These results show that microalgae are effective in wastewater treatment and have great potential in producing biofuels, thus contributing to the transition towards more sustainable energy sources and climate change mitigation.

Valorization of residual lignocellulosic biomass in South America: a review.

Residual lignocellulosic biomass (RLB) is a valuable resource that can help address environmental issues by serving as an alternative to fossil fuels and as a raw material for producing various value-added molecules. To gain a comprehensive understanding of the use of lignocellulosic waste in South America, a review was conducted over the last 4 years. The review focused on energy generation, biofuel production, obtaining platform molecules (such as ethanol, hydroxymethylfurfural, furfural, and levulinic acid), and other materials of interest. The review found that Brazil, Colombia, and Ecuador had the most RLB sources, with sugarcane, oil palm, and rice crop residues being the most prominent. In South America, RLB is used to produce biogas, syngas, hydrogen, bio-oil, biodiesel, torrefied biomass, pellets, and biomass briquettes. The most studied and produced value-added molecule was ethanol, followed by furfural, hydroxymethylfurfural, and levulinic acid. Other applications of interest that have been developed with RLB include obtaining activated carbon and nanomaterials. Significant progress has been made in South America in utilizing RLB, and some countries have been more proactive in regulating its use. However, there is still much to learn about the potential of RLB in each country. This review provides an updated perspective on the typification and valorization of residual biomass in South America and discusses the level of research and technology being applied in the region. This information can be helpful for future research on RLB in South America.

Cultivation of Chlorella vulgaris in wastewater: biodiesel potential and wastewater remediation.

The present investigation has evaluated the use of effluents from a secondary municipal wastewater treatment plant for biomass production and potential of the biomass for biodiesel production. Cultivations of Chlorella vulgaris using wastewater, wastewater with supplementation, and WC medium were carried out. Effect of wastewater collected in different months on biomass productivity (BP) and lipid composition was studied. Methods based on NMR and GC-MS techniques were applied for determining the composition of the lipids and their fatty acid profile including poly unsaturated fatty acids (PUFAs). Lipids extracted are comprised of both neutral (tri acyl glycerides, TAG; free fatty acids, FFA) and polar (glyco glycero/phospho) lipids. The TAG content of the extracted lipids was determined in the range of 22.5-41.3% w/w. The NMR and GC-MS compositional results of microalgal lipids of biomasses cultivated in wastewater without nutrient supplementation, collected in different months, showed potential for biodiesel production. The fatty acid profiles of neutral and polar lipids, which are mainly comprised of saturated and unsaturated long alkyl chain (C16-C22) fatty acids, are potential sources for the biodiesel and food industry. The concentration of nitrates (45-78 mg L-1) in wastewater without supplementation, collected in different months, was found to be optimum to enable cultivation of biomasses with reasonably good BP of 21.5-28.1 mg L-1 day-1. Similar results have been obtained in the present work as well as reported in the literature in the case of WC medium (nitrate, 69 mg L-1) with BP of 25.5-28.2 mg L-1 day-1, thus highlighted the significance of the presented work.

Continuous rotary kiln pyrolysis of cassava plant shoot system and wide speciation of oxygenated and nitrogen-containing compounds in bio-oil by HESI and APPI-Orbitrap MS.

This work proposes the pyrolysis of the cassava plant shoot system biomass and a comprehensive chemical characterization of the resulting bio-oil. The highest yields of liquid products were obtained at 600 °C, with 12.6 % bio-oil (organic fraction), which presented the lowest total acid number of 65.7 mg KOH g-1. The bio-oil produced at 500 °C exhibited the highest total phenolic content of approximately 41 % GAE, confirmed by GC/MS analysis (33.8 % of the total area). FT-Orbitrap MS analysis found hundreds of oxygenated constituents in the bio-oils, belonging to the O2-7 classes, as well as nitrogen compounds from the Ny and OxNy classes. Higher pyrolysis temperatures resulted in more oxygenated phenolics (O4-7) undergoing secondary degradation and deoxygenation reactions, generating O2-3 compounds. Additional classes affected were O3-5N2-3, while O1-2N1 presented more stable compounds. These findings show that cassava bio-oils are promising sources of renewable chemicals.

Rice husk reuse as a sustainable energy alternative in Tolima, Colombia.

Colombia has great potential to produce clean energy through the use of residual biomass from the agricultural sector, such as residues obtained from the life cycle of rice production. This document presents a mixed approach methodology study to examine the combustion of rice husks as a possible energy alternative in the Tolima department of Colombia. First, the physicochemical characteristics of the rice husk were analyzed to characterize the raw material. Next, System Advisor Model (SAM) software was used to model a bioenergy plant to obtain biochar, bio-oil, and biogas from the combustion of rice husks and generate performance matrices, such as thermal efficiency, heat rate, and capacity factor. Then, the project was evaluated for financial feasibility using a mathematical model of net present value (NPV) with a planning horizon of 5 years. Finally, a subset of the local population was surveyed to assess perspectives on the project in the region. The results of the rice husk physicochemical analysis were the following: nitrogen content (0.74%), organic carbon (38.04%), silica (18.39%), humidity determination (7.68%), ash (19.4%), presence of carbonates (< 0.01%), and pH (6.41). These properties are adequate for the combustion process. The SAM simulation showed that the heat transferred in the boiler was 3180 kW, maintaining an efficiency between 50 and 52% throughout the 12 months of the year, meaning that the rice husk can generate electricity and thermal energy. The financial analysis showed that the internal rate of return (IRR) was 6% higher than the opportunity interest rate (OIR), demonstrating economic feasibility of the project. The design and creation of a rice husk processing plant is socially and environmentally viable and has the potential to contribute to the economic development of the Tolima community and reduce greenhouse gases. Likewise, this activity has the potential to promote energy security for consumers and environmental sustainability while at the same time being economically competitive.

Towards the valorisation of glycerol by designing the surface chemistry of carbon xerogels by doping and oxygen functionalization.

Research on innovative approaches to the valorisation of glycerol as a subproduct of biodiesel production has acquired an increasing demand in the development of a circular economy around energy generation, especially, in the line of improvement of the heterogeneous metallic catalysts used. In this regard, carbon xerogels have gained importance due to their stability and modifiability, while transition metals such as copper stand out as a cost-effective alternative, resulting in a technology where surface engineering plays a crucial role in achieving competitive catalytic activity. Building upon this, current research evaluates doped xerogels (Si, N, or GO) as supports of Cu and catalysts by themselves for glycerol oxidation. Benefits from the incorporation of oxygenated functional groups (OFG) were also evaluated. Results showed a consistently higher selectivity towards lactic acid (LA) across all catalysts and competitive catalytic conversion. In this performance, dopants played a crucial role in surface acid-base characteristics, while oxygenated functional groups (OFG) influenced copper adsorption, dispersion, and reducibility. Notably, the Cu/CXN-f catalyst demonstrated the highest LA yield by combining the effect of N as a doping species, with the presence of OFG and the formation of appropriated metallic Cu domains. This research underscores the potential of carbon xerogels in the tailored catalyst design, contributing to sustainable chemical production through their customizable textural and chemical properties.

Insights into hydrothermal treatment of biomass blends: Assessing energy yield and ash content for biofuel enhancement.

This study explores the Hydrothermal Carbonization (HTC) treatment of lignocellulosic biomass blends, delving into the influence of several key parameters: temperature, additive nature and dosage, residence time, and biomass composition. Rapeseeds, Pinus radiata sawdust, oat husks, and pressed olive served as the studied biomasses. One hundred twenty-eight experiments were conducted to assess the effects on mass yield (MY), energy yield (EY), higher heating value (HHV), and final ash content (ASH) by a Factorial Experimental Design. The derived model equations demonstrated a robust fit to the experimental data, averaging an R2 exceeding 0.94, affirming their predictive accuracy. The observed energy yield ranged between 65% and 80%, notably with sawdust and olive blends securing EY levels surpassing 70%, while rapeseed blends exhibited the highest HHV at 25 MJ/kg. Temperature emerged as the most influential factor, resulting in an 11% decrease in MY and a substantial 2.20 MJ/kg increase in HHV. Contrastingly, blend composition and additive presence significantly impacted ASH and EY, with all blends exhibiting increased ASH in the presence of additives. Higher initial hemicellulose and aqueous extractive content in raw biomass correlated proportionally with heightened HHV.

Design of a sustainable system for wastewater treatment and generation of biofuels based on the biomass of the aquatic plant Eichhornia Crassipes.

Colombia's continuous contamination of water resources and the low alternatives to produce biofuels have affected the fulfillment of the objectives of sustainable development, deteriorating the environment and affecting the economic productivity of this country. Due to this reality, projects on environmental and economic sustainability, phytoremediation, and the production of biofuels such as ethanol and hydrogen were combined. The objective of this article was to design and develop a sustainable system for wastewater treatment and the generation of biofuels based on the biomass of the aquatic plant Eichhornia crassipes. A system that simulates an artificial wetland with live E. crassipes plants was designed and developed, removing organic matter contaminants; subsequently, and continuing the sustainability project, bioreactors were designed, adapted, and started up to produce bioethanol and biohydrogen with the hydrolyzed biomass used in the phytoremediation process, generating around 12 g/L of bioethanol and around 81 ml H2/g. The proposed research strategy suggests combining two sustainable methods, bioremediation and biofuel production, to preserve the natural beauty of water systems and their surroundings.

Co-composting of green waste and biogas waste: physical, chemical parameters and quality of ripe compound.

The impact of adding biogas waste (BW) to green waste (GW) composting to increase nitrogen supplementation and improve mature compost quality was investigated. Conducted over 90 days using static windrows, the experiment compared treatments with GW alone (T1) and GW supplemented with BW (T2 and T3). The results showed that the addition of BW increased temperatures, improved the C/N ratio, and expedited the stabilization process compared to T1. Furthermore, the addition of BW led to significant degradation of hemicellulose (up to 39.98%) and cellulose (up to 27.63%) compared to GW alone. Analysis of Fourier-transform infrared (FTIR) spectra revealed the presence of aromatic, phenolic, aliphatic, and polysaccharide structures in the compost, with BW supplementation enhancing these characteristics. Importantly, the germination index (GI) assessment indicated that the compounds produced were not toxic and instead exhibited stimulatory effects on seed germination. Overall, the findings suggest that supplementing GW composting with BW can enhance the quality and efficacy of the composting process, resulting in compost with desirable properties for agricultural use.

Exploring the potential of Canavalia ensiformis for phytoremediation of B10 biodiesel-contaminated soil: insights on aromatic compound degradation and soil fertility.

The widespread use of petroleum-based fuels poses a significant environmental problem due to the risks associated with accidental spills. Among the treatments available, phytoremediation is increasingly accepted as an effective and low-cost solution. This study aimed to evaluate the degradation of the aromatic fraction of biodiesel B10 and the soil fertility analysis in artificially contaminated soils treated with phytoremediation. The experimental design consisted of a 3x3 factorial, with three types of soil treatment: control, autoclaved, and planted with C. ensiformis L, and three levels of B10 biodiesel contamination: 0, 1, and 2%, to simulate spills of 30,000 and 60,000 L ha-1. The soil was analyzed at three depths: 0-10, 10-20, and 20-30 cm. The results indicated that aromatic compound degradation after phytoremediation was superior to 92,76% and 88,65% for 1% and 2% B10 soil contamination, respectively. The fuel contamination affected soil fertility, reducing the availability of phosphorus and zinc while increasing the Total Organic Carbon (TOC), pH, and the availability of manganese and iron for plants.

Numerous studies have been carried out on the phytoremediation of soils contaminated with diesel. However, the potential impact of biodiesel-diesel blends on soil fertility has not been fully explored, leading to a critical knowledge gap. This work investigates the novel effects of biodiesel-diesel blends on phytoremediation and soil fertility, allowing us to expand our understanding of the effectiveness of this approach to remediate contaminated sites.