Active rheumatoid arthritis in a mouse model is not an independent risk factor for periprosthetic joint infection.

INTRODUCTION: Periprosthetic joint infection (PJI) represents a devastating complication of total joint arthroplasty associated with significant morbidity and mortality. Literature suggests a possible higher incidence of periprosthetic joint infection (PJI) in patients with rheumatoid arthritis (RA). There is, however, no consensus on this purported risk nor a well-defined mechanism. This study investigates how collagen-induced arthritis (CIA), a validated animal model of RA, impacts infectious burden in a well-established model of PJI. METHODS: Control mice were compared against CIA mice. Whole blood samples were collected to quantify systemic IgG levels via ELISA. Ex vivo respiratory burst function was measured via dihydrorhodamine assay. Ex vivo Staphylococcus aureus Xen36 burden was measured directly via colony forming unit (CFU) counts and crystal violet assay to assess biofilm formation. In vivo, surgical placement of a titanium implant through the knee joint and inoculation with S. aureus Xen36 was performed. Bacterial burden was then quantified by longitudinal bioluminescent imaging. RESULTS: Mice with CIA demonstrated significantly higher levels of systemic IgG compared with control mice (p = 0.003). Ex vivo, there was no significant difference in respiratory burst function (p = 0.89) or S. aureus bacterial burden as measured by CFU counts (p = 0.91) and crystal violet assay (p = 0.96). In vivo, no significant difference in bacterial bioluminescence between groups was found at all postoperative time points. CFU counts of both the implant and the peri-implant tissue were not significantly different between groups (p = 0.82 and 0.80, respectively). CONCLUSION: This study demonstrated no significant difference in S. aureus infectious burden between mice with CIA and control mice. These results suggest that untreated, active RA may not represent a significant intrinsic risk factor for PJI, however further mechanistic translational and clinical studies are warranted.

Preparation and characterisation of a gellan gum-based hydrogel enabling osteogenesis and inhibiting Enterococcus faecalis.

Infections are the leading cause of failure of osteogenic material implantation. Antibiotic treatment, treatment with bone cement, or collagen sponge placement can result in drug resistance and difficulties in operation. To address this, gellan gum (GG) was selected in this study and prepared as an injectable hydrogel containing chlorhexidine (CHX) and nanohydroxyapatite (nHA) that overcomes these intractable problems. Scanning electron microscopy and micro-computed tomography revealed a three-dimensional polymeric network of the hydrogel. The hydrogel had excellent biocompatibility, as detected by cell counting kit-8 and Live/Dead assay. Bone marrow mesenchymal stem cells could be encapsulated into the network, showing that the structure was suitable for cell growth. Additionally, loading the hydrogel with nHA improved its mechanical, biodegradable, and osteogenic properties. Quantitative alkaline phosphatase and Alizarin Red S staining validated its osteogenic ability. Furthermore, antibacterial activity assessment showed that the hydrogel loaded with 50 µg/mL CHX inhibited Enterococcus faecalis in a concentration-dependent manner. Thus, we report an injectable GG-based hydrogel with superior antibacterial effect against E. faecalis and osteogenesis, which holds promise for treating infectious bone defects caused by refractory periradicular periodontitis.

Oral microbial profile variation during canine ligature-induced peri-implantitis development.

BACKGROUND: Dental implants have become well-established in oral rehabilitation for fully or partially edentulous patients. However, peri-implantitis often leads to the failure of dental implants. The aim of this study was to understand the core microbiome associated with peri-implantitis and evaluate potential peri-implantitis pathogens based on canine peri-implantitis model. RESULTS: In this study, three beagle dogs were used to build peri-implantitis models with ligature-induced strategy. The peri-implant sulcular fluids were collected at four different phases based on disease severity during the peri-implantitis development. Microbial compositions during peri-implantitis development were monitored and evaluated. The microbes were presented with operational taxonomic unit (OTU) classified at 97% identity of the high-throughput 16S rRNA gene fragments. Microbial diversity and richness varied during peri-implantitis. At the phylum-level, Firmicutes decreased and Bacteroides increased during peri-implantitis development. At the genus-level, Peptostreptococcus decreased and Porphyromonas increased, suggesting peri-implantitis pathogens might be assigned to these two genera. Further species-level and co-occurrence network analyses identified several potential keystone species during peri-implantitis development, and some OTUs were potential peri-implantitis pathogens. CONCLUSION: In summary, canine peri-implantitis models help to identify several potential keystone peri-implantitis associated species. The canine model can give insight into human peri-implantitis associated microbiota.

Evaluation of the temporary effect of physical vapor deposition silver coating on resistance to infection in transdermal skin and bone integrated pylon with deep porosity.

Periprosthetic infection via skin-implant interface is a leading cause of failures and revisions in direct skeletal attachment of limb prostheses. Implants with deep porosity fabricated with skin and bone integrated pylons (SBIP) technology allow for skin ingrowth through the implant's structure creating natural barrier against infection. However, until the skin cells remodel in all pores of the implant, additional care is required to prevent from entering bacteria to the still nonoccupied pores. Temporary silver coating was evaluated in this work as a means to provide protection from infection immediately after implantation followed by dissolution of silver layer in few weeks. A sputtering coating with 1 µm thickness was selected to be sufficient for fighting infection until the deep ingrowth of skin in the porous structure of the pylon is completed. In vitro study showed less bacterial (Staphylococcus aureus, Staphylococcus epidermidis, and Pseudomonas aeruginosa) growth on silver coated tablets compared to the control group. Analysis of cellular density of MG-63 cells, fibroblasts, and mesenchymal stem cells (MSCs) showed that silver coating did not inhibit the cell growth on the implants and did not affect cellular functional activity. The in vivo study did not show any postoperative complications during the 6-month observation period in the model of above-knee amputation in rabbits when SBIP implants, either silver-coated or untreated were inserted into the bone residuum. Three-phase scintigraphy demonstrated angiogenesis in the pores of the pylons. The findings suggest that a silver coating with well-chosen specifications can increase the safety of porous implants for direct skeletal attachment. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 107B: 169-177, 2019.

The influence of bone-graft bio-functionalization with plasma of argon on bacterial contamination.

Plasma of argon was demonstrated to improve protein and cell adhesion on bone grafts. On the other hand, increased surface energy and hydrophilicity could potentially amplify the risks of graft surface contamination in a clinical environment. The aim of the present study was to in vitro verify if the plasma of argon treatment could alter the graft characteristics affecting its ability to remain sterile. Six graft materials produced by different company were selected for this study, and randomly split by allocation either in the test (Plasma of argon treatment for 20') or the control group (only removed from the plastic sterile vials). To replicate the surgical work flow, both test and control samples were left 2 min in the clinical environment simulated conditions. Samples were therefore transferred in a Biosafety level 2 culture room. Bacterial growth analysis was performed. Optical density at 600 nm was measured as readout of bacterial growth and, after 24 hours, colony forming unit (CFU) was evaluated. Statistical analysis was performed by using the ordinary one-way ANOVA. The optical density confirmed no significant differences within groups and the number of CFU/ml for each measured sample (test and control) failed to present significant differences. Data from the present study highlighted that surface activation using plasma of argon did not affect the degree of contamination of the bone grafts, allowing to maintain a required sterility of the surface. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 67-70, 2019.

The effects of blood conditioning films on the antimicrobial and retention properties of zirconium-nitride silver surfaces.

External bone fixation devices provide support and rehabilitation for severely damaged/broken bones, however, this invasive procedure is prone to infection. Zirconium nitride/silver (Ti-ZrN/Ag) coatings were characterised for surface topography, chemical composition, physicochemistry and antimicrobial efficacy (against Staphylococcus aureus and Staphylococcus epidermidis), in the presence of a blood conditioning film. The conditioning film altered the width of the microtopography of the surfaces however, the depth of the features remained relatively constant. The conditioning film also altered the coatings from hydrophobic to hydrophilic/partially hydrophilic surfaces. Following the MATH assay, the presence of a conditioning film reduced affinity towards the hydrocarbons for both microorganisms. The addition of a blood conditioning film reduced the antimicrobial efficacy of the Ti-ZrN/Ag coatings but also reduced the number of retained bacteria. This study suggests that the presence of a pre-defined blood conditioning film may result in surfaces with anti-adhesive properties, potentially leading to a reduction in bacterial retention. This, combined with the antimicrobial efficacy of the coatings, could reduce the risk of infection on biomaterial surfaces.

Temperature-Controlled Reversible Exposure and Hiding of Antimicrobial Peptides on an Implant for Killing Bacteria at Room Temperature and Improving Biocompatibility in Vivo.

Modification of implants by antimicrobial peptides (AMPs) can improve the antimicrobial activity of the implants. However, AMPs have some cytotoxicity in vivo when they are exposed at body temperature. To tackle this challenge, we propose to develop a new approach to generating a smart antimicrobial surface through exposure of AMPs on the surface. A polydopamine film was first formed on the substrates, followed by the conjugation of a temperature-sensitive polymer, poly( N-isopropylacrylamide) (pNIPAM), to the film through atom transfer radical polymerization (ATRP). Then, AMPs were conjugated to the NIPAM on the resultant pNIPAM-modified surface through a click chemistry reaction. Because of the temperature-sensitive property of pNIPAM, the AMPs motif was more exposed to the external environment at room temperature (25 °C) than at body temperature (37 °C), making the surface present a higher antimicrobial activity at room temperature than at body temperature. More importantly, such a smart behavior is accompanied with the increased biocompatibility of the surface at body temperature when compared to the substrates unmodified or modified by AMPs or pNIPAM alone. Our in vivo study further verified that pNIPAM-AMP dual modified bone implants showed increased biocompatibility even when they were challenged with the bacteria at room temperature before implantation. These results indicate that the implants are antibacterial at room temperature and can be safely employed during surgery, resulting in no infection after implantations. Our work represents a new promising strategy to fully explore the antimicrobial property of AMPs, while improving their biocompatibility in vivo. The higher exposure of AMPs at room temperature (the temperature for storing the implants before surgery) will help decrease the risk of bacterial infection, and the lower exposure of AMPs at body temperature (the temperature after the implants are placed into the body by surgery) will improve the biocompatibility of AMPs.

Successful bony integration of a porous tantalum implant despite longlasting and ongoing infection: Histologic workup of an explanted shoulder prosthesis.

Infection associated with an implant is a complication feared in surgery, as it leads to loosening and dysfunction. This report documents an unexpected good bony integration of a porous tantalum shoulder prosthesis despite infection. A shoulder prosthesis with a porous tantalum glenoidal base plate was retrieved after 3 years of ongoing infection with Staphylococcus spp. Methyl-methacrylate embedded sections of the retrieved glenoidal component were analyzed by optical and scanning electron beam microscopy (SEM). Bone ongrowth and ingrowth were quantified. Bone had formed at the implant surface and within the open cell structure of the porous tantalum. The bone implant contact index was 32%. The bone ingrowth or relative bone area within the open structure was 8.2%, respectively 11.9% in the outer 50% of the thickness. Due to the section thickness, bone ongrowth could best be documented in SEM. Despite long-lasting and ongoing infection, the glenoidal base plate of the prosthesis showed good bony integration upon removal. The bone ingrowth into the porous tantalum was comparable to the values previously reported for the undersurface of retrieved proximal humerus resurfacing implants. Good integration of the implant however did not solve the problem of infection, and related morbidity. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2924-2931, 2018.

Histopathology in Periprosthetic Joint Infection: When Will the Morphomolecular Diagnosis Be a Reality?

The presence of a polymorphonuclear neutrophil infiltrate in periprosthetic tissues has been shown to correlate closely with the diagnosis of septic implant failure. The histological criterion considered by the Musculoskeletal Infection Society to be diagnostic of periprosthetic joint infection is "greater than five neutrophils per high-power field in five high-power fields observed from histologic analysis of periprosthetic tissue at ×400 magnification." Surgeons and pathologists should be aware of the qualifications introduced by different authors during the last years in the histological techniques, samples for histological study, cutoffs used for the diagnosis of infection, and types of patients studied. Recently, immunohistochemistry and histochemistry studies have appeared which suggest that the cutoff point of five polymorphonuclear neutrophils in five high-power fields is too high for the diagnosis of many periprosthetic joint infections. Therefore, morphomolecular techniques could help in the future to achieve a more reliable histological diagnosis of periprosthetic joint infection.

A resorbable antibiotic eluting bone void filler for periprosthetic joint infection prevention.

Periprosthetic joint infection (PJI) following total knee arthroplasty is a globally increasing procedural complication. These infections are difficult to treat and typically require revision surgery. Antibiotic-loaded bone cement is frequently utilized to deliver antibiotics to the site of infection; however, bone cement is a nondegrading foreign body and known to leach its antibiotic load, after an initial burst release, at subtherapeutic concentrations for months. This work characterized a resorbable, antibiotic-eluting bone void filler designed to restore bone volume and prevent PJI. Three device formulations were fabricated, consisting of different combinations of synthetic inorganic bone graft material, degradable polymer matrices, salt porogens, and antibiotic tobramycin. These formulations were examined to determine the antibiotic's elution kinetics and bactericidal potential, the device's degradation in vitro, as well as osteoconductivity and device resorption in vivo using a pilot rabbit bone implant model. Kirby-Bauer antibiotic susceptibility tests assessed bactericidal activity. Liquid chromatography with tandem mass spectrometry measured antibiotic elution kinetics, and scanning electron microscopy was used to qualitatively assess degradation. Results indicated sustained antibiotic release from all three formulations above the Staphylococcus aureus minimum inhibitory concentration for a period of 5 to 8 weeks. Extensive degradation was observed with the Group 3 formulation after 90 days in phosphate-buffered saline, with a lesser degree of degradation observed in the other two formulations. Results from the pilot rabbit study showed the Group 3 device to be biocompatible, with minimal inflammatory response and no fibrous encapsulation in bone. The device was also highly osteoconductive-exhibiting an accelerated mineral apposition rate. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 1632-1642, 2016.

Vancomycin containing PLLA/ß-TCP controls experimental osteomyelitis in vivo.

BACKGROUND: Implant-related osteomyelitis (IRO) is recently controlled with local antibiotic delivery systems to overcome conventional therapy disadvantages. In vivo evaluation of such systems is however too little. QUESTIONS/PURPOSES: We asked whether vancomycin (V)-containing poly-l-lactic acid/ß-tricalcium phosphate (PLLA/ß-TCP) composites control experimental IRO and promote bone healing in vivo. METHODS: Fifty-six rats were distributed to five groups in this longitudinal controlled study. Experimental IRO was established at tibiae by injecting methicillin-resistant Staphylococcus aureus (MRSA) suspensions with titanium particles in 32 rats. Vancomycin-free PLLA/ß-TCP composites were implanted into the normal and infected tibiae, whereas V-PLLA/ß-TCP composites and coated (C)-V-PLLA/ß-TCP composites were implanted into IRO sites. Sham-operated tibiae established the control group. Radiological and histological scores were quantified with microbiological findings on weeks 1 and 6. RESULTS: IRO is resolved in the CV- and the V-PLLA/ß-TCP groups but not in the PLLA/ß-TCP group. MRSA was not isolated in the CV- and the V-PLLA/ß-TCP groups at all times whereas the bacteria were present in the PLLA/ß-TCP group. Radiological signs secondary to infection are improved from 10.9 ± 0.9 to 3.0 ± 0.3 in the V-PLLA/ß-TCP group but remained constant in the PLLA/ß-TCP group. Histology scores are improved from 24.7 ± 6.5 to 17.6 ± 4.8 and from 27.6 ± 7.9 to 32.4 ± 8.9 in the CV-PLLA/ß-TCP and the V-PLLA/ß-TCP groups, respectively. New bone was formed in all the PLLA/ß-TCP group at weeks 1 and 6. CONCLUSIONS: CV- and V-PLLA/ß-TCP composites controlled experimental IRO and promoted bone healing. CLINICAL RELEVANCE: CV- and V-PLLA/ß-TCP composites have the potential of controlling experimental IRO and promoting bone healing.